Professional Documents
Culture Documents
Conformance Document For 9132
Conformance Document For 9132
Introduction PUSCH Conformance is broken down into two sections as shown below. A brief explanation of the conformance testing is given below. Performance requirements of PUSCH in multipath fading propagation conditions Performance requirements for HARQ-ACK multiplexed on PUSCH
Two performance requirements are defined for HARQ-ACK multiplexed on the PUSCH: ACK false detection probability is the probability that ACK is detected when data is only sent on symbols where HARQACK information can be allocated. The ACK missed detection probability is the conditional probability of not detecting an ACK when it was sent on PUSCH resources. The conditions specified for this test are two receive antennas, normal cyclic prefix, ETU70 channel, using Fixed Reference Channel (FRC). The test is run on a sub-frame by sub-frame basis at each SNR test point. For each sub-frame an uplink waveform is generated with and without ACK information, passed through a fading channel and the HARQ-ACK decoded. False detections and missed detections are recorded and the probability of error displayed for the range of SNRs tested. Below are the conformance results of MATLAB simulations which have been simulated for 1000 sub-frames. Limitation of MATLAB simulations: Currently MATLAB cannot do conformance on the bases as RLS MATLAB has limitation for the following: Parameter Value Maximum number of HARQ transmissions 4 RV sequence 0, 2, 3, 1, 0, 2, 3, 1
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -0.1 70% Passed -4.1 30% Passed
Graph Plot
-4.1 -0.1
Results
SNR : Fraction of maximum throughput : Passed/Failed: 11 70% Passed
Graph Plot
11
Results
SNR : Fraction of maximum throughput : Passed/Failed: 18.6 70% Passed
Graph Plot
18.6
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: -2.1 30% Failed HARQ retransmission cannot be tested 2.4 70% Passed
Graph Plot
-2.1 2.4
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.9 30% Failed HARQ retransmission cannot be tested 12.1 70% Passed
Graph Plot
4.9 12.1
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: 19.2 70% Passed HARQ retransmission cannot be tested
Graph Plot
19.2
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -3.9 30% Passed 0.5 70% Passed
Graph Plot
-3.9 0.5
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.9 30% Failed HARQ retransmission cannot be tested 12.9 70% Passed
Graph Plot
4.9 12.9
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: 0.2 70% Passed -3.6 30% Passed
Graph Plot
-3.6 0.2
Results
SNR : Fraction of maximum throughput : Passed/Failed: 11.4 70% Passed
Graph Plot
11.4
Results
SNR : Fraction of maximum throughput : Passed/Failed: 18.9 70% Passed
Graph Plot
18.9
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed:
-2.1 2.5
-2.1 30% Failed HARQ retransmission cannot be tested 2.5 70% Passed
Graph Plot
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.9 30% Failed HARQ retransmission cannot be tested 12 70% Passed
Graph Plot
4.9 12
Results
SNR : Fraction of maximum throughput : Passed/Failed: 19.4 70% Passed
Graph Plot
19.4
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -3.5 30% Passed 0.7 70% Passed
Graph Plot
-3.5 0.7
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 5.1 30% Failed HARQ retransmission cannot be tested 13.2 70% Passed
Graph Plot
5.1 13.2
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: 0.2 70% Passed -3.9 30% Passed
Graph Plot
-3.9 0.2
Results
SNR : Fraction of maximum throughput : Passed/Failed: 11.9 70% Passed
Graph Plot
11.9
Results
SNR : Fraction of maximum throughput : Passed/Failed: 19.4 70% Passed
Graph Plot
19.4
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed:
-2.2 2.4
-2.2 30% Failed HARQ retransmission cannot be tested 2.4 70% Passed
Graph Plot
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.8 30% Failed HARQ retransmission cannot be tested 12 70% Passed
Graph Plot
4.8 12.1
Results
SNR : Fraction of maximum throughput : Passed/Failed: 19.3 70% Passed
Graph Plot
19.3
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -3.5 30% Passed 0.3 70% Passed
Graph Plot
-3.5 0.3
100
80
70%
CRC 60 CRC % 40
30%
20
0 -10 -8 -6 -4 -2 0
8 10 12 14 16 18 20 22 24 26 28 30 32 34 SNR
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.8 30% Failed HARQ retransmission cannot be tested 13.5 70% Passed
Graph Plot
4.8 13.5
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -3.6 70% Passed 0.2 30% Passed
Graph Plot
-3.6 0.2
Results
SNR : Fraction of maximum throughput : Passed/Failed: 12.1 70% Passed
Graph Plot
12.1
Results
SNR : Fraction of maximum throughput : Passed/Failed: 20.3 70% Passed
Graph Plot
20.3
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed:
-2.1 2.4
-2.1 30% Failed HARQ retransmission cannot be tested 2.4 70% Passed
Graph Plot
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.9 30% Failed HARQ retransmission cannot be tested 12.1 70% Passed
Graph Plot
4.9 12.1
Results
SNR : Fraction of maximum throughput : Passed/Failed: 19..3 70% Passed
Graph Plot
19.3
Results
SNR : Fraction of maximum throughput : Passed/Failed: SNR : Fraction of maximum throughput : Passed/Failed: -3.5 30% Passed 0.8 70% Passed
Graph Plot
-3.5 0.8
100
80
70%
CRC 60 CRC % 40
30%
20
0 -10 -8 -6 -4 -2 0
8 10 12 14 16 18 20 22 24 26 28 30 32 34 SNR
Results
SNR : Fraction of maximum throughput : Passed/Failed: MATLAB Limitation: SNR : Fraction of maximum throughput : Passed/Failed: 4.8 30% Failed HARQ retransmission cannot be tested 13.6 70% Passed
Graph Plot
4.8 13.6