Professional Documents
Culture Documents
LG - Philips Lc470wu1-Sla1 Lcdpanel Datasheet
LG - Philips Lc470wu1-Sla1 Lcdpanel Datasheet
Product Specification
) Preliminary Specification
( ) Final Specification
Title
BUYER MODEL -
*When you obtain standard approval, please use the above model name without suffix
APPROVED BY /
SIGNATURE DATE
SIGNATURE DATE
Please return 1 copy for your confirmation with your signature and comments.
Ver. 1.1
JUN. 10 2006
1 / 27
Product Specification
CONTENTS
Number COVER CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 9-1 9-2 9-3 9-4 9-5 9-6 Appendix Ver. 1.1 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR DATA REFERENCE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECTION FILM PALLET ASSY & LABELING JUN. 10 2006 ITEM Page 1 2 3 4 5 6 6 8 11 12 13 14 16 20 23 24 24 24 25 25 25 26 26 26 27 27 27 27 28/29/30 2 / 27
Product Specification
RECORD OF REVISIONS
Revision No. 0.1 0.2 Revision Date APR.19, 2006 May.25.2006 Page 4 7,10 1.0 Jun.02. 2006 Description Preliminary Specification(First Draft) Lamp Current (5.5mA 5.3mA) Change of the Inverter Voff (0.5V 0.8V) Final Specification
Ver. 1.1
JUN. 10 2006
3 / 27
Product Specification
1. General Description
The LC470WU1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive display type which is operating in the normally black mode. It has a 46.96 inch diagonally measured active display area with WUXGA resolution (1080 vertical by 1920 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes. Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. Therefore, it can present a palette of more than 16.7M(true) colors. It has been designed to apply the 8-bit 2-port LVDS interface. It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important.
Mini-LVDS(RGB)
Timing Controller
(LVDS Rx integrated)
General Features
Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Viewing Angle (CR>10) Power Consumption Weight Display Mode Surface Treatment 46.96 inch (1192.87mm) diagonal 1096.0(H) x 640.0 (V) x 48.1 mm(D) (Typ.) 0.5415 mm x 0.5415 mm 1920 horiz. by 1080 vert. Pixels, RGB stripe arrangement 8-bit, 16.7 M colors 550 cd/m2 (Center 1point ,Typ.) Viewing angle free ( R/L 178 (Typ.), U/D 178 (Typ.)) Total 230.56W (Typ.) (Logic=7.56W, Inverter=223 W [IBL= 5.3] ) 20.0K g (Typ.) Transmissive mode, Normally black Hard coating(3H), Anti-glare treatment of the front polarizer 4 / 27
Ver. 1.1
JUN. 10 2006
Product Specification
ON/OFF Control Voltage Brightness Control Voltage Operating Temperature Storage Temperature
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 C Max. and no condensation of water.
90% 60 60% Wet Bulb Temperature [C] 40 40% 30 20 10 0 10% 10 20 30 40 50 60 70 80 Humidity [(%)RH] 50 Storage
Operation
-20
Ver. 1.1
JUN. 10 2006
5 / 27
Product Specification
Note : 1. The specified current and power consumption are under the VLCD=12.0V, 25 2C, fV=60Hz condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency. 2. The current is specified at the maximum current pattern. 3. The duration of rush current is about 2ms and rising time of power input is 1ms (min.).
Mosaic Pattern(8 x 6)
Ver. 1.1
JUN. 10 2006
6 / 27
Product Specification
Table 2. ELECTRICAL CHARACTERISTICS (Continue) Value Parameter Inverter : Power Input Voltage Power Supply Input Voltage Ripple Power Input Current Power Consumption Input Voltage for Control System Signals Lamp : Life Time Notes : 1. Electrical characteristics are determined after the unit has been ON and stable for approximately 120 minutes at 252C The specified current and power consumption are under the typical supply Input voltage, it is total power consumption. The ripple voltage of the power supply input voltage is under 0.4 Vp-p. LPL recommend Input Voltage is 24.0V 5%. 2. Brightness Control. This VBR Voltage control brightness. 50,000 Hrs 3 Brightness Adjust On/Off On Off operating Turn on IBL IBL PBL VBR V on V off 0 3.0 -0.3 0.0 9.3 10.3 223 VBL 22.8 24.0 25.2 0.4 10.0 11.0 240 3.3 5.0 0.8 VDC Vp-p A A W VDC VDC VDC 2 1 Symbol Min Typ Max Unit Note
3. The life is determined as the time at which luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2C. Specified value is when lamp is aligned horizontally.
Ver. 1.1
JUN. 10 2006
7 / 27
Product Specification
Symbol
GND MSDA MSCL VSDA VSCL WP LVDS Select VBR_EXT VBR_OUT AI Enable GND RO0N RO0P RO1N RO1P RO2N RO2N GND ROCLKN ROCLKP GND RO3N RO3P Reserved (NC) Reserved (NC) Reserved (NC) Ground
Description
No connection No connection No connection No connection Data Write Protection Logic L Level : LG(NS) Format External VBR Input VBR Output Logic L Level : Disable Ground FIRST CHANNEL 0FIRST CHANNEL FIRST CHANNEL FIRST CHANNEL FIRST CHANNEL FIRST CHANNEL Ground 0+ 11+ 22+
No
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 -
Symbol
Reserved (NC) RE0N RE0P RE1N RE1P RE2N RE2P GND RECLKN RECLKP GND RE3N RE3P Reserved (NC) Reserved (NC) Reserved (NC) Reserved (NC) GND GND GND NC
Description
No connection or Ground SECOND CHANNEL 0SECOND CHANNEL 0+ SECOND CHANNEL 1SECOND CHANNEL 1+ SECOND CHANNEL 2SECOND CHANNEL 2+ Ground SECOND CLOCK CHANNEL CSECOND CLOCK CHANNEL C+ Ground SECOND CHANNEL 3SECOND CHANNEL 3+ No connection No connection No connection or Ground No connection or Ground Ground Ground Ground No connection Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V -
FIRST CLOCK CHANNEL CFIRST CLOCK CHANNEL C+ Ground FIRST CHANNEL 3FIRST CHANNEL 3+ No connection No connection No connection or Ground
Note : 1. All GND(ground) pins should be connected together to the LCD modules metal frame. 2. All VLCD (power input) pins should be connected together. 3. All Input levels of LVDS signals are based on the IEA 664 Standard. 4. Specific pins(pin No. #1~#10) are used for internal data process of the LCD module. If not used, these pins are no connection.
Ver. 1.1
JUN. 10 2006
8 / 27
Product Specification
Notes : 1. Refer to LVDS Transmitter Data Sheet for detail descriptions. 2. 7 means MSB and 0 means LSB at R,G,B pixel data
Ver. 1.1
JUN. 10 2006
9 / 27
Product Specification
3-2-2. Backlight Inverter Input Connector -Inverter Connector : S12B-PH-SM3(manufactured by JST) or Equivalent -Mating Connector : PHR-12 or Equivalent Status Connector -Inverter Connector : 20022WR-02A00(manufactured by Yeon Ho co., Korea) -Mating Connector : 20022HR-02S00(manufactured by Yeon Ho co., Korea) Table 5. INVERTER CONNECTOR PIN CONFIGULATION Pin No 1 2 3 4 5 6 7 8 9 10 11 12 Symbol VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off Description Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V POWER GND POWER GND POWER GND POWER GND POWER GND 0V ~ 3.3V 0V ~ 5.0V Master VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off Slave VBL VBL VBL VBL VBL GND GND GND GND GND Dont care Dont care 2 3 1 Note
Option Pin(Lamp Open Status Detection) 1 2 GND Status Component side 1 2 3 POWER GND Upper 3.0V(Normal), Under 0.7V(Abnormal) Input connector 11 12 GND Status Status connector 1 2 Top
PCB
Bottom Note : 1. GND should be connected to the LCD modules metal frame. 2. Minimum Brightness : VBR = 0.0V Maximum Brightness : VBR = 3.3V 3. VON : 3.0 ~ 5.0V VOFF : -0.3 ~ 0.8V
Ver. 1.1
JUN. 10 2006
10 / 27
Product Specification
Table 6. TIMING TABLE for NTSC (DE Only Mode) ITEM Display Period Horizontal Blank Total Display Period Vertical Blank Total Symbol Min 100 1060 11 1091 Typ 960 140 1100 1080 45 1125 Max 320 1280 69 1149 Unit tclk tclk tclk Lines Lines Lines 2200/2 Note
Min 70 65.5 57
Max 77 68.9 63
Note 148.5/2
fCLK fH fV
Note : The Input of HSYNC & VSYNC signal does not have an effect on normal operation(DE Only Mode). The performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rate.
Ver. 1.1
JUN. 10 2006
11 / 27
Product Specification
DCLK
tCLK
0.5 VDD
Invalid data
Invalid data
DE(Data Enable)
* *
tHBP
tHV
tHFP
DE(Data Enable)
Ver. 1.1
JUN. 10 2006
12 / 27
Product Specification
Table8. COLOR DATA REFERENCE Input Color Data Color RED MSB LSB MSB GREEN LSB MSB BLUE LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red (255) Green (255) 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 ... 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 1 1 1 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 1 1 1 0 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 0 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0
Basic Color
Blue (255) Cyan Magenta Yellow White RED (000) Dark RED (001)
RED
... RED (254) RED (255) GREEN (000) Dark GREEN (001)
GREEN
... GREEN (254) GREEN (255) BLUE (000) Dark BLUE (001)
BLUE
Ver. 1.1
JUN. 10 2006
13 / 27
Product Specification
90% 10%
T1 T2 Valid Data
T5 T6
T7
T4 T9
Lamp ON Power for Lamp Table 9. POWER SEQUENCE Parameter T1 T2 T3 T4 T5 T6 T7 T8 T9 Note : Value Min 0.5 0.5 200 200 0.5 1.0 Typ 0 < T8 < T2 0 < T9 < T5 Max 20 50 50 300 Unit ms ms ms ms ms ms s ms ms
1. Please avoid floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply VLCD to 0V. 3. Flicker would come out when power on-off(T7=under 2s) is tested over several ten-times. 4. The case when the T2/T5 exceed maximum specification, it operates protection pattern(Black pattern) till valid signal inputted. There is no reliability problem. 5. The T3/T4 is recommended value, the case when failed to meet a minimum specification, abnormal display would be shown. There is no reliability problem. JUN. 10 2006 14 / 27
Ver. 1.1
Product Specification
3-6-2. On/Off for Inverter 24V (typ.) 90% Power Supply For Inverter VBL 10% 0V 0.7V
T3
T2
T4
0V Table 10. POWER SEQUENCE FOR INVERTER Value Parameter Min T1 T2 T3 T4 T5 Ver. 1.1 20 500 200 0 Typ Max 10 ms ms ms ms ms VBL(Min) x 0.8 15 / 27 inverters connected condition Unit Remark
JUN. 10 2006
Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been ON and stable for approximately 2 Hrs in a dark environment at 252C. The specified optical values are measured at an approximate 50cm distance from the LCD surface on condition that viewing angle of and equal to 0 . FIG. 1 shows additional information concerning the measurement equipment and method. LCD Module Pritchard 880 or equivalent
Optical Stage(x,y)
50cm FIG. 1 Optical Characteristic Measurement Equipment and Method Table 11. OPTICAL CHARACTERISTICS Parameter Contrast Ratio Surface Luminance, white Luminance Variation Response Time (Gray-to-Gray) RED GREEN Color Coordinates [CIE1931] BLUE WHITE Viewing Angle (CR>10) x axis, right(=0) x axis, left (=180) y axis, up (=90) y axis, down (=270) Gray Scale Ver. 1.1 r l u d Without AI With AI 85 85 85 85 89 89 89 89 6 16 / 27 Symbol CR CR with AI LWH WHITE 5P TrR , TrD Rx Ry Gx Gy Bx By Wx Wy Ta= 252C, VLCD=12.0V, fV=60Hz, Dclk=148.5MHz VBR=3.3V Value Min 600 1200 450 Typ 800 1600 550 Max cd/m2 1.3 8 0.638 0.340 0.279 0.611 0.146 0.062 0.272 0.278 16 ms Unit Note 1 2 3 4
Typ -0.03
Typ +0.03
degree
JUN. 10 2006
Product Specification
Note : 1. Contrast Ratio(CR) is defined mathematically as : Surface Luminance with all white pixels Surface Luminance with all black pixels Measure Position : Center 1-point. Contrast Ratio = 2. Surface Luminance(LWH) is the luminance value measured at an approximate 50cm distance from the center 1-point of LCD surface as all pixels displaying white. See FIG. 2 for more information. 3. The variation of surface luminance , WHITE is defined as : WHITE(5P) = Maximum(Lon1,Lon2, Lon3, Lon4, Lon5) / Minimum(Lon1,Lon2, Lon3, Lon4, Lon5) Where Lon1 to Lon5 are the luminance with all pixels displaying white at 5 locations . For more information, see the FIG. 2. 4. Response time is defined as the required time for the transition from G(N) to G(M) (Rise Time, TrR) and from G(M) to G(N) (Decay Time, TrD). For additional information see the FIG. 3. (N<M) 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD module surface. For more information, see the FIG. 4. 6. See Table 12 for gray scale specification
Table 12. GRAY SCALE SPECIFICATION Gray Level L0 L15 L31 L47 L63 L79 L95 L111 L127 L143 L159 L175 L191 L207 L223 L239 L255 Ver. 1.1 Luminance [%] (Typ.) 0.16 0.33 0.96 2.36 4.67 7.95 12.21 17.19 22.5 28.86 36.48 44.1 54.26 64.42 75.32 87.3 100 JUN. 10 2006 Luminance [%] (Typ.) with AI 0.06 0.13 0.64 1.8 3.56 6.2 10.3 14.2 19.5 25.5 32.6 40.8 50.4 60.2 72.4 85.0 100 17 / 27
Product Specification
Measuring point for surface luminance & measuring point for luminance variation.
H A
B V
Response time is defined as the following figure and shall be measured by switching the input signal for Gray(N) and Gray(M).
TrR 100 90
TrD
Optical Response
Ver. 1.1
JUN. 10 2006
18 / 27
Product Specification
Normal E Y = 90 , Up
= 180 , Left
= 0 , Right
= 270 , Down
Ver. 1.1
JUN. 10 2006
19 / 27
Product Specification
5. Mechanical Characteristics
Table 13 provides general mechanical characteristics. Table 13. MECHANICAL CHARACTERISTICS
Item Horizontal Outline Dimension Vertical Depth Bezel Area Horizontal Vertical Horizontal Vertical
Value 1096.0 mm 640.0 mm 48.1 mm 1047.8 mm 593.0 mm 1039.68 mm 584.82 mm 20.0 Kg (Typ.) Hard coating(3H) Anti-glare treatment of the front polarizer
Note : Please refer to page21 and 22 for mechanic drawings in terms of tolerance.
Ver. 1.1
JUN. 10 2006
20 / 27
Product Specification
<FRONT VIEW>
Ver. 1.1
JUN. 10 2006
21 / 27
Product Specification
<REAR VIEW>
Ver. 1.1
JUN. 10 2006
22 / 27
Product Specification
6. Reliability
Table 14. ENVIRONMENT TEST CONDITION No. 1 2 3 4 Test Item High temperature storage test Low temperature storage test High temperature operation test Low temperature operation test Ta= 50C 240h Ta= -20C 240h Ta= 40C 50%RH Ta= 0C 240h 240h Condition
Wave form : random Vibration level : 1.0G RMS Bandwidth : 10-300Hz Duration : 30 min for X,Y,Z axis One time each direction Shock level :50G(X,Y axis) , 35G(Z axis) Waveform : half sine wave, 11ms Direction : X, Y, Z One time each direction Ta= 40 C, 90%RH 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m)
Ver. 1.1
JUN. 10 2006
23 / 27
Product Specification
7-2. EMC
a) ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHZ to 40GHz. American National Standards Institute(ANSI), 1992 b) C.I.S.P.R. Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. International Special Committee on Radio Interference. c) EN 55022 Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. European Committee for Electrotechnical Standardization.(CENELEC), 1998 ( Including A1: 2000 )
Ver. 1.1
JUN. 10 2006
24 / 27
Product Specification
Note 1. YEAR Year Mark 2. MONTH Month Mark Jan 1 Feb 2 Mar 3 Apr 4 May 5 Jun 6 Jul 7 Aug 8 Sep 9 Oct A Nov B Dec C 2001 1 2002 2 2003 3 2004 4 2005 5 2006 6 2007 7 2008 8 2009 9 2010 0
b) Location of Lot Mark Serial No. is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.
Ver. 1.1
JUN. 10 2006
25 / 27
Product Specification
9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
Ver. 1.1
JUN. 10 2006
26 / 27
Product Specification
9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5C and 35C at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
Ver. 1.1
JUN. 10 2006
27 / 27