Professional Documents
Culture Documents
Abstracts: Ishhc Xiv
Abstracts: Ishhc Xiv
Foto: KJ Szabó
Abstracts
Jan‐Erling Bäckvall, Ed.
Stockholm University, Sweden
SPONSORS
We would like to thank our sponsors for their invaluable financial support for
ISHHC XIV
Granholms stiftelse
1
2
Scientific program
Plenary lecture (PL), Keynote lecture (KL), Oral contribution (OC)
10.45 Coffee
12.45 Lunch
3
Lecture Hall Aula Lecture Hall Aula Magna
Magna (Left) (Right)
4
Tuesday, September 15, 2009
Lecture Hall Aula
Magna (Left)
10.40 Coffee
13.00 Lunch
5
15.40 Coffee
6
Wednesday, September 16, 2009
Lecture Hall Aula Magna
(Left)
10.30 Coffee
7
Thursday, September 17, 2009
Lecture Hall Aula Magna
(Left)
10.30 Coffee
12.45 Lunch
14.00 Poster session 3
15.30 Coffee
8
9
Friday, September 18, 2009
Lecture Hall Aula Magna
(Left)
10.50 Coffee
10
Plenary lectures
PL1-PL13
11
12
PL-1
Gabor A. Somorjai
Monodispersed transition metal (Pt, Rh, Pd) nanoparticles (NP) in the 0.8-10 nm range have
been synthesized and are being used to probe catalytic selectivity in multipath organic
transformation reactions. The turnover rates and product distributions depend on their size,
shape, oxidation states, and their composition in case of bimetallic NP systems. Less than 2
nm dendrimer-supported platinum and rhodium NPs usually have higher oxidation states and
can be utilized for catalytic cyclization and hydroformylation reactions that previously were
produced only by homogeneous catalysis. Transition metal nanoparticles in metal core (Pt,
Co)–inorganic shell (SiO2) structure exhibit exceptional thermal stability and are well-suited
to perform catalytic reactions at high temperatures (> 400 ºC). Instruments developed in our
laboratory permit the atomic and molecular level study of NPs under reaction conditions
(SFG, ambient pressure XPS and high pressure STM). These studies indicate continuous
restructuring of the metal substrate and the adsorbate molecules, changes of oxidation states
with NP size and surface composition variations of bimetallic NPs with changes of reactant
molecules. The facile rearrangement of NP catalysts required for catalytic turnover makes
nanoparticle systems (heterogeneous, homogeneous and enzyme) excellent catalysts.
13
PL-2
Everyone that works within the field of catalysis is looking towards the amazing functionality
of nature’s catalysts, the enzymes. It is particularly the mild conditions that these catalysts are
able to operate at and the selectivity that they demonstrate that make these materials dream
targets for scientists involved in the art of synthesizing homogeneous and heterogeneous
industrial catalysts. But enzymes have also a week points, their low thermal stability and their
often too slow reaction rates for an economical industrial process has to be overcome. The
obvious solution would be the copy the catalytic active centre into a robust open framework.
A key property to an enzyme is the selectivity, this property is partly regulated by steric
constraints surrounding the catalytically active cite. The microporous zeolite based catalysts
show in some cases impressive selectivity based on the geometrical constraints imposed by
the size and shape of the regular channels in these crystalline silicate phosphate based
structures and enzyme like properties has been claimed but the pure inorganic nature of the
selective internal surface in these materials make it impossible to mimic many important
enzymatic properties. The new generation of microporous materials, Metal Organic
Frameworks are hybrid organic inorganic structures. This dualistic nature offers an
unprecedented flexibility in the possibility to incorporate both organic and metallic functional
groups into the ordered crystalline lattice and thereby opening up for a much grater possibility
to copy structural motives known from enzymes into much simpler but also more stable open
structures. Several groups are working on development of new catalyst by this approach. We
will illustrate these approaches with structures that mimic anhydrase and C-H activation.
Zr-MOF-UiO-67_bipyridine with tetrahedral cobalt in a position that might mimic the active
site in the enzyme carbonic anhydrase. MOF structure left active site in anhydrase right.
14
PL-3
Robert H. Grubbs
Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA 91125
email: RHG@Caltech.edu
Ruthenium based olefin metathesis catalysts have provided new routes to olefins that appear
in a variety of structures. Their functional group tolerance and ease of use allow their
application in the synthesis of multifunctional bioactive molecules. The same systems are also
useful for the synthesis of an array of new materials from multifunctional polymers to
supramolecular systems. Underlying these developments has been the discovery of active
catalysts with controlled selectivity through the synthesis of new ligands that control the
geometry of the intermediate carbene and metallacycle complexes.
References
"Cyclic Ruthenium-Alkylidene Catalysts for Ring-Expansion Metathesis Polymerization." A. J. Boydston, J. A.
Kornfield, I. A. Gorodetskaya, R. H. Grubbs
"Well-Defined Silica-Supported Olefin Metathesis Catalysts" D. P. Allen, M. M. Van Wingerden, R. H. Grubbs
Org. Let. 2009, 1261-1264
"Pulsed-Addition Ring-Opening Metathesis Polymerization: Catalyst-Economical Syntheses of Homopolymers
and Block Copolymers" J. B. Matson, S. C. Virgil, R. H. Grubbs , J. Am. Chem. Soc. 2009, 131, 3355-3362
"Ring-Expansion Metathesis Polymerization: Catalyst-Dependent Polymerization Profiles" Y. Xia, A. J.
Boydston, Y. F. Yao, J. A. Kornfield , I. A. Gordodetskaya, H. W. Spiess, R. H. Grubbs J. Am. Chem. Soc.
2009, 131, 2670-2677.
"A Direct Route to Cyclic Organic Nanostructures via Ring-Expansion Metathesis Polymerization of a
Dendronized Macromonomer" Boydston AJ, Holcombe TW, Unruh DA, J. M. Frechet, R. H. Grubbs J. Am.
Chem. Soc. 2009, 131, 5388
"Effects of NHC-Backbone Substitution on Efficiency in Ruthenium-Based Olefin Metathesis"
K. M. Kuhn, J-B. Bourg, C. Chung, S. C. Virgil, R. H. Grubbs J. Am. Chem. Soc. 2009, 131, 5313-5320
"Conformations of N-Heterocyclic Carbene Ligands in Ruthenium Complexes Relevant to Olefin Metathesis" I.
C. Stewart, D. Benitez, D. J. O'Leary, E. Tkatchouk, M. W. Day, W. A. Goddard, R. H. Grubbs J. Am. Chem.
Soc. 2009, 131, 1931-1938
15
PL-4
Takao Ikariya
Tokyo Institute of Technology, Japan
Recent advance in the conceptually new chiral bifunctional transition metal based catalysts
promoted asymmetric reactions, the concerto molecular catalysis, is described. This
bifunctional molecular catalyst originated from a metal/NH acid-base synergy effect offered a
great opportunity to open up fundamental aspects for stereoselective transformation including
enantioselective C–H, C–C, C–N bond formation and is now realized to be a powerful tool to
access chiral compounds in organic synthesis. I will focus on the reductive and oxidative
transformation including aerobic oxidation alcohols developed with the bifunctional mono-
and di-nuclear metal catalysts
16
PL-5
Manfred T. Reetz
Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim/Ruhr, Germany
E-mail: reetz@mpi-muelheim.mpg.de
Some time ago we proposed and implemented experimentally a new approach to asymmetric
catalysis, namely the directed evolution of enantioselective enzymes as catalysts in synthetic
organic chemistry and in biotechnology. It is based on repeating cycles of gene mutagenesis,
expression and high-throughput screening for enantioselectivity. The most often used
mutagenesis methods in the emerging field of directed evolution are error-prone PCR
(epPCR), saturation mutagenesis and DNA shuffling, methods that we used in our original
proof-of-principle study using a lipase back in 1996-1997. Subsequently we applied our
approach to other enzymes, and a number of industrial and academic groups have likewise
contributed to this new area of asymmetric catalysis. However, as in modern synthetic organic
chemistry, methodology development is crucial for further progress. The challenge is to
devise Darwinian methods and strategies for probing protein space more efficiently than in
the past, enabling fast directed evolution. To this end we have developed Iterative Saturation
Mutagenesis (ISM) in its two embodiments: CASTing for controlling enantioselectivity and
B-FIT for improving the thermostability of enzymes. In order to assess the efficacy of these
methodological developments, we have devised a deconvolution strategy which allows the
construction of fitness landscapes. Applications in enantioselective transformations using
lipases, epoxide hydrolases, reductases and monooxygenases such as Baeyer-Villigerases will
be highlighted in the talk.
17
PL-6
Claudio Bianchini
Istituto di Chimica dei Composti Organometallici (ICCOM-CNR)
Via Madonna del Piano 10, 50019 Sesto Fiorentino (FI), Italy
claudio.bianchini@iccom.cnr.it, www.iccom.cnr.it
Many relevant renewable resources from agriculture such as alcohols and sugars are
appropriate anolytes for both direct fuel cells (DFCs) and electrolyzers for H2 production. The
oxidation of the fuel in a DFC can be controlled by the anode electrocatalyst that can be
appropriately designed to convert the fuel into energy and higher added value products.
Likewise, the production of H2 in an electrolyzer can be achieved at much lower
overpotentials by replacing water with a suitable anolyte that can be selectively converted into
a chemical product.
In this lecture are described molecular and nanosized metal catalysts for the conversion of
renewables into energy & chemicals and their application in effective DFCs and electrolyzers.
Two examples of the concept forwarded in this lecture are illustrated in Scheme 1.
DFC
CH3CH2OH/H2O CH3COOH + energy
Electrolyzer
CH3CH2OH/H2O CH3COOH + H2
Scheme 1
References
1) Bambagioni, V.; Bianchini, C.; Filippi, J.; Oberhauser, W.; Marchionni, A.; Vizza, F.; Psaro, R.;
Sordelli, L.; Foresti, M. L.; Innocenti, M. ChemSusChem, 2009, 2, 99.
2) Bambagioni, V.; Bianchini, C.; Filippi, J.; Oberhauser, W.; Marchionni, A.; Vizza, F.; Teddy, J.; Serp,
P.; Zhiani, M. J. Power Sources 2009, .
3) Bianchini, C.; Bambagioni,, V.; Filippi, J.; Marchionni, A.; Vizza, F.; Bert, P.; Tampucci, A.
Electrochem. Commun. 2009,
4) Bert, P., Bianchini C.; Catanorchi, S.; Filpi, A.; Nugent, D.; Ragnoli, M.; Tampucci A., Vizza, F.; Ren,
X. PCT/EP2007/062555, WO/2008/061975.
5) Bert, P., Bianchini C.; Giambastiani G.; Marchionni, A.; Tampucci A., Vizza, F. PCT/EP2008/055706.
6) Bianchini, C.; Shen, P. K. Chem. Rev. 2009
7) Cui, G.; Song, S.; Shen, P. K.; Kowal, A.; Bianchini, C. J. Phys. Chem. 2009.
18
PL-7
References:
1. R.A. van Santen, Acc. Chem. Res., ASAP Article, 10.1021/ar800022m (2008).
2. R.A. van Santen, M. Neurock, Molecular Heterogeneous Catalysis, Wiley, 2008
3. E.A. Pidko, P. Mignon, P. Geerlings, R.A. Schoonheydt, R.A.van Santen, J. Phys. Chem. 112, 5510 (2008).
4. J.G.O. Ojwang, R.A. van Santen, G.J. Kramer, A.C.T.van Duin, W.A.Goddard III, J. Chem.Phys.
128,164714 (2008).
19
PL-8
David Milstein
Department of Organic Chemistry, The Weizmann Institute of Science, Rehovot 76100, Israel
References
(1) Zhang, J.; Leitus, G.; Ben-David, Y.; Milstein, D. J. Am. Chem. Soc. 2005, 127, 10840.
(2) Zhang, J.; Leitus, G.; Ben-David, Y.; Milstein, D. Angew. Chem. Int. Ed. 2006, 45, 1113
(3) Gunanathan, C.; Ben-David, Y.; Milstein, D. Science, 2007, 317, 790
(4) Gunanathan, C.; Milstein, D. Angew Chem. Int. Ed. 2008, 47, 8661
(5) Gunanathan, C.; Shimon, L. J. W.; Milstein, D. J. Am. Chem. Soc. 2009, 131, 3146
(6) Kohl, S. W.; Weiner, L.; Schwartsburd, L.; Konstantinovski, L.; Shimon, L. J. W.; Ben-David, Y.; Iron, M.;
Milstein, D. Science 2009, 324, 74
20
PL-9
Gold(I) complexes are the catalysts of choice for the cyclization of 1,6-enynes and related
substrates under mild conditions.1 We have found that, whereas propargyl acetates react
undergo 1,2- or 1,3-acetate migration,2 propargyl alcohols, ethers, and silyl ethers 1 react with
cationic gold catalysts by a new type of intramolecular 1,5-migration of OR groups.3 This
reaction leads stereospecifically to tricyclic compounds 2, which are related to the
sesquiterpenes globulol (3a), epiglobulol (3b), and halichonadin F (3c).
H H
H H H
[Au(I)]
RO
H H
OR X
1 2 3a: 4R, X = OH
3b: 4S, X = OH
3c: 4S, X = NH2
The migration proceeds via allyl-gold cations 4 by a syn-addition of the alkyne and the OR
group to the alkene. Thus, gold-catalyzed reaction of 5a with norbornene gave cyclopropane
6, while trapping of the migration intermediate using indole gave adduct 7. Enyne 5b with an
allyloxy group gave 8 as a single stereoisomer as a result of a 1,5-migration followed by an
intramolecular cyclopropanation.
H
RO
indole
NH
H
OMe [Au(I)] [Au(I)] H OMe
6 (75%, dr = 3.2:1) 5a: R = Me 7 (79%)
5b: R = Allyl
[Au(I)]
AuL
H
H
R'
H
OR O
4 H
8 (65%)
Acknowledgements. This work was supported by the MICINN (CTQ2007-60745/BQU, Consolider Ingenio
2010, Grant CSD2006-0003), the AGAUR, and the ICIQ Foundation.
21
PL-10
Odile Eisenstein
Institut Charles Gerhardt, CNRS-Université Montpellier 2, Place Eugène Bataillon 34095 Montpellier, France
Computational studies are currently carried out together with experimental studies to obtain a
better understanding of the nature and energy profile of reaction paths. An efficient catalytic
cycle is thus associated with a rather flat energy profile without stable intermediates and
energetically high transition states. While a perfectly valid condition, this is not sufficient for
obtaining an efficient catalytic cycle because secondary unwanted reactions may compete
with the main path. The determination of the mechanisms and energy profiles for the main
wanted reaction and secondary unwanted reactions is thus needed for a rational design of
catalysts. This will be illustrated for olefine metathesis catalysts supported on silica.
22
PL-11
B. Pugin
A modular approach for the immobilization of catalysts by covalent binding and for the preparation of
extractable / water soluble catalysts will be presented and illustrated with the story of S-Metolachlor,
an important herbicide which today is produced in a >10'000 t/y scale with a homogeneous Ir-catalyst.
In addition, factors such as the type of support, the pore size, the catalyst surface loading that can
influence the properties of immobilized catalysts will be discussed. It will be shown that immobilized
catalysts with properties that are of industrial interest can be prepared but that these catalysts tend to
be substantially more complex and expensive than their homogeneous counterparts.
To the best of our knowledge, there are not yet examples for the use of immobilized metal complex
catalysts in industrial processes. The second part will therefore address the question ‘When and where
will immobilized catalysts be used in industry?’. Different methods for the preparation of catalysts that
can be separated by filtration or extraction will be discussed and assessed from our personal view. In
our opinion, decisive factors will be e.g.
- demand for homogeneous catalysis,
- benefit of immobilization,
- ease of access to and costs of immobilized catalysts
- catalytic properties of immobilized catalysts
23
PL-12
Nicholas J. Turner
School of Chemistry, University of Manchester, Manchester Interdisciplinary Biocentre, 131 Princess Street,
Manchester, M20 3DH, UK. E-mail: nicholas.turner@manchester.ac.uk
The ability to change, and improve upon, the properties of a biocatalyst using directed evolution
techniques has emerged as a powerful strategy in the past 10 years. By employing appropriately
designed high-throughput screening methods, coupled with random mutagenesis to generate
large libraries of enzyme variants, it is possible to identify biocatalysts with broader substrate
tolerance, improved enantioselectivity and importantly enhanced properties (e.g. turnover,
thermostability, solvent stability) when operating under process conditions. This lecture will
review the state-of-the-art in this area, including examples from our own laboratory, in which a
range of different enzymes (e.g. amine oxidases [1-5], alcohol oxidases [6-7], racemases,
ammonia lyases, P450 monooxygenases [8] and transaminases [9]) have been subjected to
directed evolution to change one or more properties. A key focus has been the development of
deracemisation reactions, or their equivalent, in which chiral amines, alcohols and amino acids
are obtained in high yield and enantiomeric excess.
References
[1] R. Carr, M. Alexeeva, A. Enright, T.S.C. Eve, M.J. Dawson and N.J. Turner, Angew. Chem. Int. Ed., 2003, 42,
4807-4810.
[2] R. Carr, M. Alexeeva, M.J. Dawson, V. Gotor-Fernández, C.E. Humphrey and N.J. Turner, ChemBioChem,
2005, 6, 637-639.
[3] C.J. Dunsmore, R. Carr, T. Fleming and N.J. Turner, J. Am. Chem. Soc., 2006, 128, 2224-2225.
[4] T.S.C. Eve, A.S. Wells and N.J. Turner, Chem. Commun., 2007, 1530-1531.
[5] K.R. Bailey, A.J. Ellis, R. Reiss, T.J. Snape and N.J. Turner, Chem Commun., 2007, 3640-3642; K.E. Atkin,
R. Reiss, V. Koehler, K.R. Bailey, S. Hart, J.P. Turkenburg, N.J. Turner, A.M. Brzozowski and G. Grogan, J.
Mol. Biol., 2008, 384, 1218-1231.
[6] F. Escalettes and N.J. Turner, ChemBioChem, 2008, 9, 857-860.
[7] M.D. Truppo, F. Escalettes and N.J. Turner, Angew. Chem. Int. Ed., 2008, 47, 2639-2641.
[8] A. Robin, G.A. Roberts, J. Kisch, F. Sabbadin, G. Grogan, N. Bruce, N.J. Turner and S.L. Flitsch, Chem.
Commun., 2009, 2478-2480.
[9] M.D. Truppo, N.J. Turner and J.D. Rozzell, Chem. Commun., 2009, 2127-2129; M.D. Truppo, J.D. Rozzell,
J.C. Moore and N.J. Turner, Org. Biomol. Chem., 2009, 7, 395-398.
24
PL-13
[1] J.M. Thomas et al, Topics in Catalysis 2009, 52, 1630. [9] J.Zhang,S.Chen and X.Bu, Angewandte Chemie 2009, 48,
[2] J.M. Thomas et al, PhysChemChem Phys 2009, 6099
11, 2799. [10] J.M. Thomas and R.Raja, Acc .Chem. Res. 2008, 41, 708
[3] J.M. Thomas, J. Chem. Phys. 2008, 128, 182502. [11] C.Li et al, Chem. Commun. 2007, 547
[4] J.M. Thomas, R. Raja and D.W. Lewis, Angewandte [12] J.M. Thomas and R.Raja, PNAS 2005, 102, 13732
Chemie 2005, 44, 6456. [13] M.Iwamoto and Y.Kosugi, J. Phys. Chem. C 2007,111,
[5] H.Balcar et al, Topics in Catalysis (in press). 13
[6] J.Sun et al, Nature 2009, 458, 1154. [14] M.Taoufik, E.Leroux, J.Thivolle-Cazat and J.M. Basset,
[7] K.D.M. Harris and J.M. Thomas, ChemCatChem 2009, Angewandte Chemie 2007, 46, 7202
1, in press
[8] L.Mac.Abney and W.Lin, Chem. Soc. Rev. 2009, 38, 1248
25
26
Keynote lectures
KL1-KL10
27
28
KL-1
Both industrial and biochemical ammonia syntheses, producing both over 108 T/an of NH3,
are thought to rely on the cooperation of multiple metals in breaking the strong triple bond of
dinitrogen. Such multimetallic cooperation for dinitrogen cleavage is also the general rule for
dinitrogen reductive cleavage with molecular systems.[1]
We have observed the unprecedented cleavage of dinitrogen by dihydrogen at 250°C and
atmospheric pressure on isolated silica surface–supported TaIII and TaV hydride centers
[(≡SiO)2TaH] and [(≡SiO)2TaH3], leading to the TaV amido imido product
[(≡SiO)2Ta(=NH)(NH2)].
We assigned the product structure based on extensive characterization by IR and solid-state
NMR, isotopic labeling studies, supporting data from EXAFS and theoretical simulations, and
by comparison with the product directly obtained from ammonia. Reaction intermediates
revealed by in situ IR monitoring of the reaction support a mechanism highly distinct from
those previously observed in enzymatic, organometallic, and heterogeneous N2 activating
systems. A mechanism will be proposed based on DFT studies and catalytic H/D exchanges
studies.[4]
H2N
H H
either
+ N2 NH
H2 H (250°, 4dd)
O
Ta
H O Ta
H +H2 Ta
H O
O Si O O NH2/H
Si
O
O
Si
O Si
O
or
+ NH3 (RT, 3h) Si
O
Si
Si
O
Si Si O
O
O
____
[1] (a) A. Nielsen, Ed. “Ammonia: Catalysis and Manufacture” (Springer Verlag, Berlin, 1995). (b) R. R.
Schrock, forward of Nitrogen Fixation Special Issue, Proc. Natl. Acad. Sci. U.S.A. 103 (2006). (c) D. V.
Yandulov, R. R. Schrock, Science 301, 76 (2003).
[2] P. Avenier, M. Taoufik, A. Lesage, X. Solans-Monfort, A. Baudouin, A. de Mallmann, L. Veyre, J.-M.
Basset, O. Eisenstein, L. Emsley, E. A. Quadrelli Science 317, 1056-1060 (2007).
[3] P. Avenier, A. Lesage, M. Taoufik, A.Baudouin, A. De Mallmann, S. Fiddy, M. Vautier, L. Veyre, J.-M.
Basset, L. Emsley, and E. A. Quadrelli, J. Am. Chem. Soc. 129(1), 176-186 (2007).
[4] P. Avenier, X. Solans-Monfort, L. Veyre, F. Renili, J.-M. Basset, O. Eisenstein, M. Taoufik, and E. A.
Quadrelli Topics in catalysis, Special Issue “Nitrides, oxynitrides and nitrogen containing materials”,
published online 27 May (2009).
29
KL-2
David J. Cole-Hamiltona, Simon L. Desseta, Ruben Duquea, Eva Öschnera, Steven P. Nolan a,
Herve Claviera and Marc Auduitb
a
EaStCHEM, School fo Chemistry, University of St. Andrews, St. Andrews, Fife, KY16 9ST
b
Ecole Nationale Supérieure de Chimie de Rennes, Av. du Général Leclerc, 35700 Rennes, France.
The separation of catalysts from the solvent and reaction products remains one of the major problems
of homogeneous catalytic reactions, which are otherwise advantageous because of their high activity,
tuneable selectivity and ease of study. In recent years a large number of different strategies has been
employed to address this problem, ranging from the use of soluble and insoluble supports, sometimes
with ultrafiltration, to the application of biphasic systems.1, 2 Ideally, the reactions would be carried out
in continuous flow mode with the catalyst remaining in the reactor at all times, whilst the substrates
and products flow over the catalyst. A variety continuous flow reactions has been proposed.3 In this
presentation we shall highlight the use water as a benign solvent, discussing new strategies for
obtaining high rates in aqueous biphasic catalysis with fast separation and good catalyst retention.4, 5
We shall also discuss continuous flow processes involving supported ionic liquid phase catalysts, over
which the substrates flow dissolved in supercritical carbon dioxide (scCO2). The products are also
removed by the flowing scCO2 stream.6
The low solubility of hydrophobic compounds in water makes aqueous biphasic reactions involving
them slow because of mass transport limitations. By adding compounds such as 1-octyl-3-methyl
imidazolium bromide, we have been able to increase the reaction rates by almost 2 orders of
magnitude whilst retaining fast phase separation and low
catalyst leaching to the products phase. Evidence will be
presented that the additives act as weak surfactants, increasing
the interfacial surface area, but breaking as soon as the stirring
is stopped.
In an alternative approach, “switchphos” ligands have been
developed which allow the catalytic reaction to be carried out
in the organic phase, but which transport the catalyst into
water on bubbling CO2. After phase separation and
replacement of the organic phase, the catalyst can be switched
back into the organic phase by bubbling N2 with gentle
heating. This process allows the reactions to be carried out at
very high rates with the catalyst being very efficiently
separated from the products and recycled.
For the flow systems, the catalyst is supported within a thin Fig. 1. Reversible CO2 phase switching for
film of an ionic liquid supported within the pores of a catalyst recovery during the hydroformylation of
microporous silica. Substrates and products flow through the 1-octene
system dissolved in scCO2. Futher details are available in the
poster abstract of Ruben Duque.
1. D. J. Cole-Hamilton, Science, 2003, 299, 1702.
2. D. J. Cole-Hamilton and R. P. Tooze, eds., Catalyst Separation, Recovery and Recycling; Chemistry and
Process Design, Springer, Dordrecht, 2006.
3. D. J. Cole-Hamilton, T. E. Kunene and P. B. Webb, in Multiphase Homogeneous Catalysis, ed. B. Cornils,
Wiley VCH, Weinheim, 2005, vol. 2, pp. 688.
4. S. L. Desset and D. J. Cole-Hamilton, Angew. Chem. Int. Ed., 2009, 48, 1472.
5. S. L. Desset, S. W. Reader and D. J. Cole-Hamilton, Green Chem., 2008, 11, 630.
6. U. Hintermair, G. Y. Zhao, C. C. Santini, M. J. Muldoon and D. J. Cole-Hamilton, Chem. Commun., 2007,
1462.
30
KL-3
Dirk De Vos, Stijn Wuyts, Andrei Parvulescu, Joost Janssens and Pierre Jacobs
Centre for Surface Chemistry and Catalysis, K.ULeuven
Kasteelpark Arenberg 23, 3001 Leuven, Belgium
31
KL-4
The sufficient and sustainable supply of energy remains one if not the most
important challenge for our future. Clearly, the development of technologies
which allow for the replacement of contemporary fuels which are based on fossil
resources is an important task for all scientific disciplines. In this respect
advancements in hydrogen technology are of particular interest, since hydrogen
allows for an efficient conversion of chemical into electrical energy via fuel cells,
which proceeds in principle waste free with water as the only product. Catalysis
might be one of the key technologies to generate hydrogen in a sustainable
manner! In the talk the catalytic generation of hydrogen from potential hydrogen storage materials
such as formic acid will be presented. Molecular-defined catalysts have been developed, which allow
for the professional generation of hydrogen at ambient conditions.1
1. a) B. Loges, A. Boddien, H. Junge, M. Beller, Angew. Chem. Int. Ed. 2008, 47, 3962-3965; b) B. Loges, A.
Boddien, J. Noyes, H. Junge, M. Beller, Chem. Commun. 2009, in press.
32
KL-5
Xinhe Bao
State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, the Chinese Academy of Sciences,
Dalian 116023, P. R. China
In the present presentation, the unique characters of the catalysis with the nano-confined systems will
be demonstrated, and the emphasis will be laid on the variation of the electron properties derived from
the quantum well states in the 2-D nano film and the confinement effects in the interface between the
nano-islands of the oxides and noble metallic substrates.
The effect of electron quantum confinement on the catalytic activities of 2D ultra-thin metal films is
explored by comparing the work function change and the initial reaction rate of atomically flat films of
different thickness of lead layers on silicon surfaces, using complementary microscopy and
spectroscopy techniques. The obvious oscillations of the oxidation rate of lead films are observed,
which are attributed to be a manifestation of the Fabry-Pérot interference modes of electron de Broglie
waves (quantum well states) in the films. The modulation of the electron density of states near the
Fermi level opens a new dimension for tuning the catalytic performance of metal systems via size- and
thickness-dependent quantum size effects, which will be illustrated through two examples.
Coordinatively unsaturated iron species, especially those in low valent states, are pivotal for the
activation of oxygen-containing reactants. As a result, highly active oxygen species are generated
which are essential for the selective oxidation reactions. In the present, we will demonstrate a novel
concept to construct a unique high active Fe-oxo species on noble metal surfaces through a structural
confinement derived by the strange interaction. The Fe atoms at the edges of the structures show the
nature of the coordinatively unsaturated low-valent state, i.e. FeO1-x, at which the adherence of
molecular oxygen is remarkably enhanced, and the dissociation of the adsorbed dioxygen presents a
barrierless character. The preferential formation of desiccative oxygen species at the boundary of
Fe-oxo inland modifies essentially the adsorption dynamics between the carbon monoxide and oxygen,
which causes a dramatically change of the catalytic performance towards oxidation of carbon
monoxide on the surface. An integrated test of the real catalyst with 1 kw PEM fuel cell for 1000
hours shows that under the operating condition, with 20% water steam, 30ppm of CO in the reforming
hydrogen can be completed removed.
Selected Publications:
1. Teng Ma, Qiang Fu*, Hai-Yan Su, Hong-Yang Liu, Yi Cui, Zhen Wang, Ren-Tao Mu, Wei-Xue Li, and Xin-He Bao*,
CHEMPHYSCHEM, 10(2009)1013-1016
2. Rentao Mu, Qiang Fu, Hongyang Liu, Dali Tan, Runsheng Zhai, and Xinhe Bao, Appl. Surf. Sci., 255(2009)7296-7301
3. Junming Sun and Xinhe Bao, CHEMISTRY-A EUROPEAN JOURNAL (Invited Concept article), (2008)(14)7478-7488
4. Hui Zhang, Qiang Fu, Yunxi Yao, Zhen Zhang, Teng Ma, Dali Tan, Xinhe Bao, Langmuir, 24(2008)10874-10878
5. Hai-Yan Su, Xin-He Bao, and Wei-Xue Li, J. Chem. Phys., 128(2008)194707
6. Xucun Ma, Peng Jiang, Yun Qi, Jinfeng Jia, Yu Yang, Wenhui Duan, Wei-Xue Li, Xinhe Bao, S. B. Zhang and Qi-Kun Xue, P
NATL ACAD SCI USA (PNAS), 104(2007)(22)9204-9208
7. Junming Sun, Ding Ma, He Zhang, Xiumei Liu, Xiuwen Han, Xinhe Bao*, Gisela Weinberg, Norbert Pfaender, Dangsheng
Su, J. Am. Chem. Soc., 128 (49) (2006) 15756-15764
33
KL-6
M. Christina White*
Department of Chemistry, Roger Adams Laboratory, University of Illinois, Urbana, IL 61801, USA
Among the frontier challenges in chemistry in the 21st century are (1) increasing control of
chemical reactivity and (2) synthesizing complex molecules with higher levels of efficiency.
Although it has been well demonstrated that given ample time and resources, highly complex
molecules can be synthesized in the laboratory, too often current methods do not allow
chemists to match the efficiency achieved in Nature. This is particularly relevant for
molecules with non-polypropionate-like oxidation patterns (e.g. Taxol). Traditional organic
methods for installing oxidized functionality rely heavily on acid-base reactions that require
extensive functional group manipulations (FGMs) including wasteful protection-deprotection
sequences. Due to their ubiquity in complex molecules and inertness to most organic
transformation, C—H bonds have typically been ignored in the context of methods
development for total synthesis.
Aliphatic 3o C—H
Lactonization Oxidation
AcO
O
O H O
F3C N OH
highly robust latent H
21 examples
Science 2007, 318, 783. functionality Science 2007, 318, 783.
Branched C-H
Amination O Linear C—H
H Oxidation
OBn O O O
NTs R
robust latent OAc
n=2
OBn functionality
17 examples
8 examples JACS 2004, 126, 1346
JACS 2007, 129, 7274. OL 2005, 7, 223
ACIEE 2006, 45, 8217
Me
O N O O
O O CO2Me
NHBoc N
O N OR Ts
OBn
N N N CO2Me
alkyl N Linear C—H
O Amination
n=4 n=2 NO2
O Br 15 examples
Branched C-H Oxidation/ Me JACS 2008, 130, 3316.
Oxidative
Macrolactonization Oxidative Heck C-H
13 examples >50 examples Alkylation
JACS 2006, 128, 9032 JACS 2005, 127, 6970; 25 examples
2006, 128, 15076; 2008, 130, 11270; JACS 2008, 130, 14090
ACIE 2008, 47, 6448
Highly selective oxidation methods, similar to those found in Nature, for the direct installation
of oxygen, nitrogen and carbon functionalities into allylic and aliphatic C—H bonds of
complex molecules and their intermediates will be discussed. Unlike Nature which uses
elaborate enzyme active sites, we rely on the subtle electronic and steric interactions between
C—H bonds and small molecule transition metal complexes to achieve high selectivities. Our
current understanding of these interactions gained through mechanistic studies will be
discussed. Novel strategies for streamlining the process of complex molecule synthesis
enabled by these methods will be presented. Collectively, we aim to change the way that
complex molecules are constructed by redefining the reactivity principles of C—H bonds in
complex molecule settings.
34
KL-7
Noritaka Mizuno*
Oxidation reactions are very important in industry and the developments of highly atom-
efficient catalytic selective oxidation processes with environmentally friendly H2O2 or O2
(air) have extensively been demanded. Recently, the catalytic functions of polyoxometalate
(POM)-based compounds for the oxidation reactions have attracted much attention because
their properties can be controlled at atomic/molecular levels.
We succeeded in the developments of highly atom-efficient catalytic systems for efficient
green oxidations of alkanes, alkenes, and alcohols with hydrogen peroxide or molecular
oxygen by fine design and synthesis of novel POM-based molecular catalysts. For example,
lacunary POM TBA4[γ-SiW10O34(H2O)2] (TBA = tetra-n-butylammonium) catalyzed the
epoxidation of common alkenes and sulfides using hydrogen peroxide with perfect epoxide
selectivity and H2O2 utilization.[1] Transition metal-substituted POM TBA4[γ-SiV2W10O38(μ-
OH)2][2] and TBA4[γ-H2SiW10O36Cu2(μ-1,1-N3)2][3] catalyzed the chemo-, regio-, and
diastereoselective epoxidation of alkenes and the aerobic oxidative alkyne-alkyne
homocoupling, respectively.
Synthesis of POM-Based Molecular Catalysts
We synthesized the organic-inorganic
hybrid support by covalently anchoring N-
octyldihydroimidazolium cation fragment
onto SiO2.[4,5] The above POM-based
molecular catalysts could be immobilized Immobilization Extraction of Active Sites
on the support via the anion exchange. The
supported catalysts showed high
performance for the oxidations without the
N N
loss of their intrinsic catalytic nature of the + Lewis acid Brønsted base
+
N N
OH
corresponding homogeneous analogues. In N N
M
+ +
N N
addition, we have developled supported Si support
Si
OH
OH
OO O O OO
OH
OH
OH
Si Si
of the information of the catalytically O O
OH
OH
O O O O
References
[1] Science, 2003, 300, 964-966. [2] Angew. Chem. Int. Ed., 2005, 44, 5136-5141. [3] Angew. Chem. Int. Ed.,
2008, 47, 2407-2410. [4] J. Am. Chem. Soc., 2005, 127, 530-531. [5] Chem. Eur. J., 2006, 12, 4176-4184. [6]
Angew. Chem. Int. Ed., 2002, 41, 4538-4542. [7] Angew. Chem. Int. Ed., DOI: 10.1002/anie.200900418. [8]
Angew. Chem. Int. Ed., 2003, 42, 1480-1483. [9] Angew. Chem. Int. Ed., 2008, 47, 9249-9251. [10] Org. Lett.,
2004, 6, 3577-3580. [11] J. Am. Chem. Soc., 2005, 127, 6632-6640.
35
KL-8
Christopher W. Jones
School of Chemical & Biomolecular Engineering, School of Chemistry and Biochemistry, Georgia Institute of
Technology, 311 Ferst Dr., Atlanta, GA 30332, USA
*Affilitation for Fourth Author
Metal salen complexes are widely applied as catalysts for numerous important
enantioselective reactions. The reactions catalyzed by metal salen complexes generally
follow either (i) monometallic mechanisms (e.g. Mn-salen for epoxidation or Ru-salen for
cyclopropanation), whereby a single metal complex promotes the catalytic reaction or (ii)
bimetallic mechanisms, where cooperation between two metal complexes is required for
efficient catalysis (e.g. Co-salen for epoxide ring-opening or Al-salen conjugate additions of
cyanide). The design of effective heterogenized catalysts should therefore take into account
the reaction mechanism, as reactions in category (i) are hypothesized to be optimized by
accessible yet isolated supported metal salen complexes, whereas reactions of type (ii) are
hypothesized to require efficient complex mobility, facilitating metal salen – metal salen
cooperative interactions.
Here, several new designs for (a) soluble polymer or oligomer supported metal salen complex
catalysts, (b) insoluble polymer resin supported complexes, and (c) insoluble porous silica
supported are reported. Their utility in the cooperative Co-salen catalyzed hydrolytic kinetic
resolution of epoxides and the monometallic Ru-salen catalyzed enantioselective
cyclopropnantion of olefins is reported. The kinetics of the reactions using both fresh and
recycled catalysts are compared. Most catalysts are shown to deactivate during use, and the
mechanisms of deactivation are explored. Strategies to reduce or mitigate catalyst
deactivation are explored.
36
KL-9
M. Salmeron
Lawrence Berkeley National Laboratory and Materials Science and Engineering Dept. University of California,
Berkeley. CA 94720. USA
Over the last decades my laboratory has developed and applied microscopy and spectroscopy
techniques for in situ studies of the surface structure of catalysts in the presence of various
gases. These include high pressure Scanning Tunneling Microscopy (HP-STM), in situ x-ray
spectroscopies, including high pressures x-ray absorption (XAS) and X-ray photoelectron
spectroscopy (HP-XPS). We applied these techniques to the study of various reactions and
surfaces on single crystals and nanoparticles. I will illustrate the capabilities of these
techniques with several examples. These include the restructuring of Pt single crystals in the
presence of CO, the structure of Rh(111) in the presence of CO and NO, the determination of
the surface phase diagram of Pd oxides in equilibrium with O2, and others. In the area of
nanoparticles, I will show the application of XAS and HP-XPS to study the structure and
activity of Co nanoparticles for CO+H2 methanation as a function of particle diameter from 3
to 20 nm. The particles Co were found to remain metallic and covered by CO during
reaction. The reactivity per Co atom was found to decrease when the particle size became
smaller than 10 nm, an effect that was related to the decreased activity of the particles to
dissociate H2, while the rate limiting step did not change. Using HP-XPS also we observed
the structural modifications of core-shell Rh-Pd and Rh-Pt alloy nanoparticles during
oxidative and reducing conditions.
37
KL-10
Wenbin Lin
Department of Chemistry, University of North Carolina, Chapel Hill, NC 27599, USA. wlin@unc.edu
The chemistry of hybrid solids constructed from organic linkers and metal nodes has received
much recent attention, owing to the propensity of incorporating and fine-tuning desired
properties via judicious choices of their building blocks. The Lin group has explored the
rational design of functional solids based on metal-organic frameworks (MOFs) over the past
few years, with particular focuses on applying MOFs in nonlinear optics,1 hydrogen storage,2
biomedical imaging,3 and drug delivery.4 In this lecture, I would like to discuss our recent
success in the design and synthesis of chiral porous MOFs by connecting metal nodes with
chiral bridging ligands that have orthogonal functionalities. Two complementary strategies
have been successfully utilized to synthesize catalytically active chiral MOFs. In the first
approach, the primary functional groups are linked by metal-connecting units to form
extended networks whereas the orthogonal secondary chiral groups can then be used to
generate asymmetric catalytic sites by coordinating to a secondary metal center (Figure 1).
Such chiral porous MOFs have been shown to provide excellent catalysts for the additions of
diethylzinc and alkynylzinc to aromatic aldehydes with very high enantioselectivities.5,6 In the
second approach, the primary functional groups are used to generate robust transition metal
precatalysts which are then linked by the metal nodes to form porous extended networks via
the secondary functional groups.7,8 These chiral porous solids have been used for highly
enantioselective asymmetric reduction of unsaturated substrates such as ketones and
ketoesters as well as oxidation reactions of alkenes. The present complementary synthetic
strategies have thus led to ideal heterogeneous asymmetric catalysts in which both the
catalytic sites and the secondary environments around them are identical throughout the solid.
In comparison to other immobilization approaches, the present strategy allows the synthesis
of heterogeneous asymmetric catalysts with higher catalyst loading and more accessible
catalytic centers.
Figure 1
REFERENCES
[1] Evans, O.R.; Lin, W. Acc. Chem. Res. 2002, 35, 511-522.
[2] Kesanli, B.; Cui, Y.; Smith, M.; Bittner, E.; Bockrath, B.; Lin, W. Angew. Chem. Int. Ed. 2005, 44, 72-75.
[3] Taylor, K.M.L.; Rieter, W.J.; Lin, W. J. Am. Chem. Soc. 2008, 130, 14358-14359.
[4] Rieter, W.J.; Pott, K.M.; Taylor, K.M.L.; Lin, W. J. Am. Chem. Soc. 2008, 130, 11584-11585.
[5] Wu, C.-D.; Hu, A.; Zhang, L.; Lin, W. J. Am. Chem. Soc. 2005, 127, 8940.
[6] Wu, C.-D.; Lin, W. Angew. Chem. Int. Ed. 2007, 46, 1075-1078.
[7] Hu, A.; Ngo, H.L.; Lin, W. J. Am. Chem. Soc. 2003, 125, 11490
[8] Ma, L.; Abney, C.; Lin, W. Chem Soc. Rev. 2009, 38, 1248-1256.
38
Oral contributions
OC1-OC38
39
40
OC-1
O
Al
O
OH
OH Li
LiAlH 4 O O
Al
THF O O
HO
HO Li
O
Al
O
(R,R)-6,6'-Bi(BINOL) Al-bridged Polymer
1) Takizawa, S.; Arai, T.; Sasai, H. J. Synth. Org. Chem. Jpn. 2009, 67, 194.
2) Takizawa, S.; Patil, M. L.; Marubayashi, K.; Sasai, H. Tetrahedron, 2007, 63, 6512.
3) Takizawa, S.; Somei, H.; Jayaprakash, D.; Sasai, H. Angew. Chem. Int. Ed. 2003, 42, 5711.
41
OC-2
Reference
[1] G. van Koten, P. W. N. M. van Leeuwen, in Catalysis: an Integrated Approach, ed. R. A. van Santen, P. W. N.
M. van Leeuwen, J. A. Moulijn, et al, Elsevier, Amsterdam, 2nd edn., 1999, ch. 6.
[2] W. Zhou, D. He. Chem. Commun., 2008, 5839.
[3] J. Dean, Analytical Chemistry Handbook. Singapore: McGraw-Hill Book Co., 1995.
42
OC-3
DG
DG Silica-SMAP–Ir (0.5 mol %)
R
R
(pin)B-B(pin) B O Ir OMe
H Silica-SMAP–Ir
2 eq hexane or octane O P
O O O O SiMe3 Si
Me O O
OMe OMe NMe2 O OMOM
O Si O O Si O
B(pin) B(pin) B(pin) B(pin) B(pin) O O
SiO2
25 °C, 2 h, 89% Me 50 °C, 3 h, 79% 70 °C, 2 h, 105% 100 °C, 6 h, 72%
50 °C, 3 h, 87% OMe O
(1) SMAP: silicon-constrained monodentate trialkylphosphine. See: (a) Ochida, A.; Hara, K.; Ito, H.;
Sawamura, M. Org. Lett. 2003, 5, 2671. (b) Ochida, A.; Hamasaka, G.; Yamauchi, Y.; Kawamorita, S.;
Oshima, N.; Hara, K.; Ohmiya, H.; Sawamura, M. Organometallics 2008, 27, 5494.
(2) (a) Hamasaka, G.; Ochida, A.; Hara, K.; Sawamura, M. Angew. Chem. Int. Ed. 2007, 46, 5381. (b)
Hamasaka, G.; Kawamorita, S.; Ochida, A.; Akiyama, R.; Hara, K.; Fukuoka, A.; Asakura, K.; Chun, W. J.;
Ohmiya, H.; Sawamura, M. Organometallics 2008, 27, 6495. (c) Kawamorita, S.; Hamasaka, G.; Ohmiya,
H.; Hara, K.; Fukuoka, A.; Sawamura, M. Org. Lett. 2008, 10, 4697.
(3) Kawamorita, S.; Ohmiya, H.; Sawamura, M. J. Am. Chem. Soc. 2009, 131, 5058.
43
OC-4
Recently we have developed a novel approach for size- and shape controlled synthesis of Pd
and Ni nanoparticles with organic ligands using simple precursors and convenient reaction
conditions.[1] Leaching of metal species from the surface of the nanoparticles to solution was
found as a convenient tool to control direction of the chemical transformation and selectivity
of the catalytic reactions (Scheme 1).
Cover picture
Eur. J. Inorg. Chem.
No 9, 2009
Scheme 1
The process of leaching was monitored in real time with 1D and 2D NMR, and the nature of
the metal species was established (i.e. the relationship between path A, B and C). It was
shown that catalyst leaching is a powerful tool for generating a new catalytic activity from in
situ formed species where the parent bulk particles are inactive. In the developed catalytic
system a novel synthetic procedures were successfully implemented to access new types of
sulfur and selenium compounds in high yields and to carry out S-S and Se-Se bonds
activation in organic molecules.
Acknowledgement. The research was supported by RFBR grants 08-03-11003, 07-03-00851
and Programs No 18, 27 of Russian Academy of Sciences.
References
1. (a) V. P. Ananikov, I. P. Beletskaya, et al. J. Am. Chem. Soc., 2007, 129, 7252; (b) Organometallics, 2007, 26,
740; (c) Chem. Eur. J., 2008, 14, 2420; (e) Eur. J. Org. Chem., 2007, 3431; (d) Eur. J. Inorg. Chem., 2009,
1149.
44
OC-5
Carmen Claver, Aitor Gual, Cyril Godard, Karine Philippota, Bruno Chaudreta, Audrey
Denicourt-Nowicki b, Alain Roucoux b and Sergio Castillón
Department de Química Física I Inorgànica, Universitat Rovira iVirigli, Tarragona, Spain, E-mail:
b
carmen.claver@urv.cat a CNRS; Laboratoire de Chimie de Coordination, Toulouse, France, Ecole Nationale
Supérieure de Chimie de Rennes, France.
Me Me
OMe
OMe
H2
R
O 2 R3
O O O
O PO P
O R1
R1 O
PO OP
O O O
O
R 3 R2
H2
Me Me
OMe OMe
Figure 1. TEM micrographs and size histograms for M-NPs, and their use as nanocatalysts in
the hydrogenation of o,m-methylanisole.
In the hydrogenation of o,m-methylanisole, the Rh-NPs showed higher activity than the
corresponding Ru-NPs. The Ir-NPs presented the lowest activity of the series. Hydrogenation
of o-methylanisole gave rise to a total selectivity in the cis-product, although the product ee
was only up to 6 %. With m-methylanisole up to 73 % cis-selectivity without asymmetric
induction was achieved. Finally, the catalytic results showed that they are clearly affected by
the substrate, the diphosphite ligand and the metal nanoparticle.
1
A. Gual, M.R. Axet, K. Philippot, B. Chaudret, A. Denicourt-Nowicky, A. Roucoux, S. Castillón, C. Claver,
Chem. Commun. 2008, 2759-2761.
2
A. Gual, C. Godard, K. Philippot, B. Chaudret, A. Denicourt-Nowicky, A. Roucoux, S. Castillón, C. Claver,
Chemsuschem. Submitted.
45
OC-6
[1] M. Heitbaum, F. Glorius, I. Escher, Angew. Chem. Int. Ed. 2006, 45, 4732-4762; E.D. Park, K.H. Lee, J.S.
Lee, Catalysis Today 2000, 63, 147-157;
[2] D. Astruc, F. Lu, J.R. Aranzaes, Angew. Chem. Int. Ed. 2005, 44, 7852-7872; C.C. Tzschucke, C. Markert,
W. Bannwarth, S. Roller, A. Hebel, R. Haag Angew. Chem. Int. Ed. 2002, 41, 3964-4000;
[3] G. Schmid, Chem. Rev. 1992, 92, 1709-1727;
[4] J. Keilitz, M.R. Radowski, J.-D. Marty, R. Haag, F. Gauffre, C. Mingotaud, Chem. Mater. 2008, 20, 2423-
2425.
46
OC-7
47
OC-8
Christina Moberg,a* Erica Wingstrand,a Anna Laurell,a Linda Franssona,b and Karl Hultb
a
KTH School of Chemical Science and Engineering, Organic Chemistry, SE 100 44 Stockholm, Sweden;
b
KTH School of Biotechnology, Department of Biochemistry, AlbaNova University Center, SE 106 91
Stockholm, Sweden
A minor enantiomer recycling one-pot procedure employing two reinforcing chiral catalysts
has been developed. Scalemic O-acylated cyanohydrins are prepared via chiral Lewis acid-
achiral Lewis base catalyzed addition of acetyl cyanide to prochiral aldehydes.1 Continuous
regeneration of the achiral starting material is effected via selective enzyme catalyzed
hydrolysis of the minor product enantiomer. The thermodynamic driving force for the process
consists of the formation of acetic acid, which is deprotonated to acetate under the slightly
basic conditions. This recycling process provides O-acylated cyanohydrins in close to perfect
enantioselectivities, higher than those obtained under optimal conditions in the direct process,
and in high yields.. A combination of a (S,S)-salen Ti Lewis acid and Candida antarctica
lipase B provides the products with R absolute configuration, whereas an opposite enantiomer
is obtained from the (R,R)-salen Ti complex and Candida rugosa lipase or Candida
cylindracea lipase.
O
O
O
apparent R CN
R CN reaction
stoichiometry
O
LB, LA*
O O
R H R CN
toluene
water
buffer, pH 8
enzyme H2O
HCN
OH chemical
driving force
R CN O
OH O
O-
1) a) Lundgren, S.; Wingstrand, E.; Penhoat, M.; Moberg, C. J. Am. Chem. Soc. 2005, 127, 11592-11593; b)
Lundgren, S.; Wingstrand, E.; Moberg, C. Adv. Synth. Catal. 2007, 349, 364-372.
48
OC-9
In recent years, catalyst development has greatly profited from the discovery of N-
heterocyclic carbenes as ligands for transition metals. Typically, such carbene complexes are
prepared from imidazolium salts via deprotonation and concerted or subsequent metallation at
C2. Upon steric or chemical protection of the C2-postion, or upon activation of the C4-
position, abnormal carbene bonding and metallation at C4 can be successfully promoted.1
Recent studies have demonstrated that such abnormal carbene bonding increases the electron
density at the metal center substantially, thus facilitating oxidative addition reactions and also
reactions in which the metal center needs to be nucleophilic.2
5
M 4 2 N 5
2 2 N
2 4
N N N N N N
MXnLm MXnLm
4 5 4 5
M N N
normal abnormal N
N
carbene
1 2
We have exploited the electronic impact of these abnormal carbene ligands in transition
metal-mediated catalysis. Specifically, platinum group metal centers such as rhodium and
palladium exert significantly improved catalytic activity in direct hydrogenation and transfer
hydrogenation when bound to abnormal rather than normal dicarbene ligands (cf. 1 and 2 in
Figure above; MXnLm = RhI2(NCMe)2+ Pd(NCMe)22+, PdCl2).3 We will present our
mechanistic investigations using combinations of in situ NMR spectroscopy, dynamic light
scattering, and poisoning experiments, which allowed the catalytically active species to be
identified. Furthermore, evidence will be provided for the decisive influence of the wingtip
group R’ in order to promote either heterogeneous or homogeneous ruthenium-mediated
activation of H2 at high pressure.
49
OC-10
Tohru Yamada*
Department of Chemistry, Keio University, Yokohama 223-8522 Japan
The catalytic amount of silver acetate with combined use of DBU was found to be an efficient
catalyst system for the incorporation reaction of carbon dioxide into various propargylic
alcohols to afford the corresponding cyclic carbonates in high-to-excellent chemical yields
under mild reaction conditions.1) Their geometry of exo-alkene in all the cyclic carbonates
was confirmed to be completely Z form by X-ray crystal structure analysis and NOE
experiments. Whereas in an aprotic
polar solvent, various tertiary and O O
secondary propargyl alcohols were OH
O O O
Ag+ in toluene O
efficiently converted into the R1 A R 3
R2 CO2 B R1 path A
corresponding α,β-unsaturated R3 DBU R2 R2 R1
2) R 3 +
carbonyl compounds in high yield. Ag Carbonate
The isotopic experiment using [3,3]-sigmatropic
in DMF rearrangement
18
C O2 revealed that carbon dioxide path B O
mediated the intramolecular O O O R1
rearrangement to an alkyne
R3 R1 R3 R2
activated by silver catalyst. The Enone
R 2 O C O
preliminary DFT calculation of the
model system also suggested that the silver catalyst would
activate C-C triple bond as π-Lewis acid. In the presence CH3
N
of the charge-delocalizable amine such as DBU, it was
predicted that the silver catalyst would locate in the anti N O
H
position of carbonate anion to afford the Z form product. O O
Then the optically active ligand would realize the CH3
CH3 CH3
enantioselective CO2 incorporation reaction to propargylic
alcohols. It was found the combined use of silver acetate and Ag
5 mol%
O
HO CH3 AgOAc O
6 mol% Ligand O
+ CO2 CHCl3, RT
Ph
*
Ligand : N N
Ph Ph (1.0 MPa) H3C N N
8 hr
Ph
89% yield
73% ee
References
1) Yamada, W.; Sugawara, Y.; Cheng, H.-M.; Ikeno, T. Yamada, T.; Eur. J. Org. Chem. 2007, 2604-2607.
2) Sugawara, Y.; Yamada, W. Yoshida, S.; Yamada, T. J. Am. Chem. Soc. 2007, 129, 12902-12903.
50
OC-11
5 mol% FeCl3
1.1 equ. Mg, 1.1 equ. TMEDA
X + R' Y R'
R THF, 0 °C, 2 h R
OMe CO2Et
N
Me2N
79 % 74 % 75 % 68 % 65 % 58 %
New mechanistic details and the unprecedented concept of domino iron catalysis will be
discussed. Recent extensions of such direct cross-coupling methodology include a novel
synthesis of styrenes and biaryl formations without resorting to the handling of pre-formed
organometallic species.[3]
[1] W. M. Czaplik, M. Mayer, J. Cvengroš, A. Jacobi von Wangelin, ChemSusChem 2009, in press.
[2] W. M. Czaplik, M. Mayer, A. Jacobi von Wangelin, Angew. Chem. Int Ed. 2009, 48, 607.
[3] W. M. Czaplik, M. Mayer, A. Jacobi von Wangelin, submitted.
51
OC-12
Chiral 1,3-diols with two stereogenic centers are important building blocks for the synthesis
of pharmaceutically relevant compounds and natural products. [1] A multitude of methods for
the stereoselective synthesis of these compounds has been developed. [2] However, the number
of syntheses which offer an access to all four type of stereoisomers is still limited.
In this contribution we describe the stereoselective and sequential formation of the two
stereogenic centers of 1,3-diols 4. This two-step process is based on an initial enantioselective
organocatalytic aldol reaction according to a modified literature protocol [3] starting from
acetone and aromatic aldehydes 1. Subsequent biocatalytic reduction of the formed β-hydroxy
ketones 3 using alcohol dehydrogenases gave the desired 1,3-diols of type 4 (Scheme 1).
The first stereogenic center was formed with enantioselectivities of about 83% ee under
solvent free conditions by means of a proline-derived organocatalyst. In the second step two
different alcohol dehydrogenases were used to form the second stereogenic center in a highly
stereoselective fashion. All stereoisomers of 1,3-diols 4 have been obtained in excellent
enantiomeric excess of >99% ee. Thus, such a combination of aldol reaction and biocatalytic
reduction represents an attractive access to all four different stereoisomers of 1,3-diols with
high diastereo- and enantioselectivities. In addition, the reaction mixtures resulting from the
organocatalytic reaction turned out to be compatible with the following enzymatic reduction.
Thus, there is no need for workup and isolation steps of the aldol reaction.
[1]
A. Kleemann, J. Engels, B. Kutscher, D. Reichert, Pharmaceutical Substances:
Syntheses, Patents, Applications, 4th ed., Thieme-Verlag, Stuttgart, 2001.
[2]
S. E. Bode, M. Wolberg, M. Müller, Synthesis 2006, 4, 557-588
[3]
V. Maya, M. Raj, V. K. Singh, Organic Letters 2007, 2593-2595
52
OC-13
Kai C. Szeto, Sébastien Norsic, Nicolas Merle, Mostafa Taoufik, Jean Thivolle-Cazat,
Jean-Marie Basset
Laboratoire de Chimie Organométallique de Surface, UMR 5265 CNRS CPE-Lyon, 43 Bd du 11 Novembre
1918, 69616 Villeurbanne, France
Selectivity (%)
80
0.15
60
0.10 40
0.05 Hydrogen 20
Ethane
0.00 0
0 20 40 60 80 20 40 60 80
t (h)
Figure 1. Conversion (part a) and selectivity (part b) of methane coupling catalyzed by W-H/Al2O3.
Spectroscopic investigations reveal the presence of methyl, carbene and carbyne species
attached to the metal (Ta or W) in an activated catalyst exposed to methane. The mechanism
of the reaction is purposed in Figure 2.
1 Soulivong, D.; Norsic, S.; Taoufik, M.; Copéret, C.; Thivolle-Cazat, J.; Chakka, S.; Basset, J.-M. J. Am.
Chem. Soc. 2008, 130, 5044.
2 Bergman, R. G. Nature 2007, 446, 391.
53
OC-14
Direct amidation from alcohols and amines driven by H2 removal, reported by Milstein et
al.,[1a] is of great interest as an ideal method for amide synthesis. To date, only two
homogeneous Ru catalysts with molecularly designed cooperative ligands were reported.[1]
However, these expensive catalysts do not tolerate secondary amines and have difficulty in
catalyst/product separation and necessity of special handling of metal complexes. Very
recently, we reported that γ-alumina-supported silver cluster (Ag/Al2O3)[2] acts as
heterogeneous catalyst for the oxidant-free dehydrogenation of alcohols and one-pot C-C
cross-coupling reaction from secondary and primary alcohols. Here we report the first
example of heterogeneously catalyzed reaction of alcohols with amines to form amides and
H2 using the easily prepared and inexpensive heterogeneous catalyst, Ag/Al2O3.
Catalysts were prepared by impregnating
O
oxides with an aqueous solution of silver Ag/Al O (4mol%)
Cs CO (20 mol%)
2 3
OH 2N 3
nitrate followed by evaporation to dryness, 1 + HN O
2 toluene(2 mL) 3 O
F F
calcination, and H2-reduction. The reaction
o
1.0 mmol 2.0 mmol 130 C, 24 h
Yield=91%
of 4-fluorobenzylalcohol 1 and morpholin 2 H + H +
H 2 H 2
was chosen as test reaction in order to
optimize all different parameters. Under the
optimized condition (alcohol/amine ratio=
- -
Ag Ag H
n n
Ag Ag H n n
N
was 91%. This is the first successful PGM- R 1
OH 1H H δ−
− R R 2 2
Ag O n H O −
free catalyst for the title reaction as well as + H on Al O +
Ag
O
+ H on Al O
n +
2 3
the first example of direct amide formation Scheme 1..
2 3
[1] a) C. Gunanathan, Y. Ben-David, D. Milstein, Science 2007, 317, 790; b) L. U. Nordstrom, H. Vogt, R. Madsen, J. Am.
Chem. Soc. 2008, 130, 17672-17673. [2] a) K. Shimizu, K. Sugino, A. Satsuma, Chem. Eur. J. 2009, 15, 2341; b) K.
Shimizu, R. Sato, A. Satsuma, Angew. Chem. Int. Ed., in press.
54
OC-15
We have pioneered the development of a new chemical technology for catalysis. This
technology bridges the property space between hydrocarbon-ligated metal complexes and
oxidic supported catalysts. It imparts new or improved properties to catalytic materials
achieving uncannily precise molecular architectures. Catalysts are derived from chemicals
known as polyhedral oligomeric silsesquioxanes (POSS) rendering silanolate metal
derivatives. POSS catalysts have unique features:
•The chemical composition of the support is a hybrid, intermediate (RSiO1.5) between that of
silica (SiO2) and silicones (R2SiO). The support is electron-withdrawing and increases Lewis
acidic catalyst activity.
•POSS catalysts can contain one or more covalently bonded reactive functionalities suitable
for polymerization, grafting, surface bonding, or other transformations covering the
generation of precise catalytic materials and catalyst supports.
•POSS catalysts are physically large and range approximately 1-3nm in size. They can be
molecularly enlarged (POSS building block chemistry) to cover applications from
homogeneous catalysis via membrane catalyst retention to truly heterogeneous catalysis,
either in gas or liquid phase application.
Presented are newly developed catalysts for alkene metathesis, oligomerization,
polymerization and epoxidation.
L. Zhang, H.C.L. Abbenhuis, N. Ni Bhriain, P.C.M.M. Magusin P.C.M.M. et al., Chem. Eur. J., 2007, 13, 1210-
1221.; R. W. J. M. Hanssen, R. A. van Santen, H. C. L. Abbenhuis, Eur. J. Inorg. Chem., 2004, 675-683.; J.I.
van der Vlugt, J. Ackerstaff, T.W. Dijkstra, A.M. Mills, H. Kooijman, A.L. Spek, A. Meetsma, H.C.L.
Abbenhuis, D. Vogt; Adv. Synt. Catal.; 2004, 346(4), 399-412.; M. D. Skowronska-Ptaskinska, M. L. W.
Vorstenbosch, R. A. Van Santen, H. C. L. Abbenhuis, Angew. Chem. Int. Ed. 2002, 41, 637-639.; H. C. L.
Abbenhuis, Chem. Eur. J. 2000, 6, 25-32.
55
OC-16
Pd nanoparticles are attracting increasing interest because of their unique properties and
potential applicability in many scientific fields, including microelectronics, chemical sensing,
data storage, and especially catalysis, where they are employed for hydrogenation and
dehydrogenation reactions, oxidation reactions, and for a large number of carbon–carbon
bond forming reactions such as Heck or Suzuki coupling. The formation of nanoclusters
necessarily requires stabilization to prevent aggregation, which would eradicate most of their
desirable advantages compared with bulk material. Recently, a great number of stabilizing
methods have been developed for controlled formation of Pd nanoclusters.
An innovative approach is the in situ formation of Pd nanoparticles inside highly cross-linked
polymers. In this study, two kinds of DVB cross-linked polymers, a poly(4-vinylpyridine-co-
ethylvinylbenzene) (P4VP) and a poly(4-ethylstyrene-co-divinylbenzene) (PS) are
successfully used as porous supports for Pd nanoparticles with different size, obtained by in-
situ reduction of Pd(OAc)2 precursor. The particle size distribution, accessible surface area,
type of exposed sites and optical properties of the Pd nanoparticles are carefully characterized
by a large variety of techniques, such as TEM microscopy and in situ EXAFS, FTIR of
adsorbed CO, and UV-Vis spectroscopies. We demonstrate that the nature of the polymeric
matrix strongly influences the properties of Pd nanoparticles, both in terms of particle size
distribution and of electronic properties.
In particular, TEM and EXAFS demonstrate that much smaller Pd nanoparticles are formed in
P4VP with respect to PS. These sub-nanometer particles feel a different electronic
environment with respect to those present in the PS matrix, due to the proximity of the
pyridine units, acting as electron donors. This is evidenced indirectly by FTIR spectroscopy
of adsorbed CO and UV-Vis spectroscopy and directly by EXAFS, revealing the presence of
nitrogen neighbours close to the sub-nanometer Pd particles in P4VP. Preliminary catalytic
results on the two systems will be also presented.
0.2
Pd/PS
2100 2000 1900 1800 1700
-1
Wavenumber(cm )
56
OC-17
Malika Boualleg,1 Jean-Marie Basset,1 Jean-Pierre Candy,1 Pierre Delichere,2 Katrin Pelzer,3
Laurent Veyre,1 Chloé Thieuleux1*
1
Université de Lyon, Institut de Chimie de Lyon, UMR C2P2 - CNRS - Université Lyon 1- ESCPE Lyon,
Equipe Chimie Organométallique de Surface 43, Bd du 11 Novembre 1918 F-69616 Villeurbanne, France.
2
Université de Lyon, Institut de Chimie de Lyon, UMR 5256 CNRS-Université de Lyon 1, Institut de
Recherches sur la Catalyse et l’Environnement de Lyon (IRCELyon) 2 avenue A. Einstein F-69616
Villeurbanne, France. 3 Fritz-Haber-Institutes of the Max Planck Society, Department for Inorganic Chemistry,
Faradayweg 4-6, 14195 Berlin, Germany.
*thieuleux@cpe.fr
New pathways leading to smart materials have been recently developed. But so far, the
specific incorporation by design of bulky objects inside materials is still a challenge. That is
the reason why we have developed an original methodology leading to the selective and
regular localisation of small Pt nanoparticles in the pores1, in the walls, or both in the pores
and in the walls of mesostructured silica matrixes. These materials were obtained by i) the
control of the hydrophilic/hydrophobic character of Pt colloids and ii) the growth of
mesostructured silica around these colloids. The hydrophilicity/hydrophobicity of the Pt
nanoparticles was found to be the key factor for controlling their selective localisation in the
final material.
Material containing Pt NPs in its pores
7 nm
)
heptane phase e)
water phase
50 nm
heptane phase
water phase
Moreover, the regular distribution of the nanoparticles and their selective localisation
increased drastically their stability and their catalytic performances which were found to be
superior to those of classical catalysts, particularly when nanoparticles were located in the
walls of the inorganic matrix.
References:
1. Boualleg, M., Basset, J.M., Candy, J. P., Delichere, P., Pelzer, K., Veyre, L. & Thieuleux. C., Chem.
Mater. 21, 775-777 (2009).
57
OC-18
Robertus J.M. Klein Gebbink, Dennis J.M. Snelders, Gerard van Koten
Chemical Biology & Organic Chemistry, Debye Institute for Nanomaterials Science, Faculty of Science, Utrecht
University, Padualaan 8, 3584 CH Utrecht, The Netherlands
Detailed investigations show that Dendriphos ligands are relatively electron-poor phosphines,
which does not account for their reactivity. Further kinetic and structure-activity relation
studies point out that indeed the size of the Dendriphosligands leads to high catalytic activity,
ultimately leading to mono-ligated Pd-species, which are held responsible for catalysis [4].
These studies will be discussed along with the substrate scope of cross-coupling reactions
catalyzed by Dendriphos systems.
[1] For selected reviews, see: a) L.J. Twyman, A.S.H. King, I.K. Martin, Chem. Soc. Rev. 2002, 31, 69-82; b)
R. van Heerbeek, P.C.J. Kamer, P.W.N.M. van Leeuwen, J.N.H. Reek, Chem. Rev. 2002, 102, 3717–3756;
c) A. Berger, R.J.M. Klein Gebbink, G. van Koten, Top. Organomet. Chem. 2006, 20, 1–38.
[2] D.J.M. Snelders, R. Kreiter, J.F. Firet, G. van Koten, R.J.M. Klein Gebbink, Adv. Synth. Catal. 2008, 350,
262-266.
[3] D.J.M. Snelders, G. van Koten, R.J.M. Klein Gebbink, manuscript in preparation.
[4] D.J.M. Snelders, G. van Koten, R.J.M. Klein Gebbink, manuscript in preparation.
58
OC-19
Alkyl carbonates are important intermediates for the chemical industry, where they are use as
starting materials for polymer synthesis (polycarbonates), solvents and in the formulation of
electrolytes for lithium batteries. Large quantities of alkyl carbonates are synthesized from
phosgene, a corrosive and highly toxic gas, which should be avoided. However, these could
be made in a very clean and direct manner from alcohols and CO2 (Eq. 1). Using carbon
dioxide as starting material would be an example of industrial shift towards greener and more
sustainable technologies. Unfortunately, in contrast with water, which spontaneously forms
carbonic acid, alcohols do not react directly with CO2. In addition, the free energy balance of
Eq 1 is weakly favorable at the ambient conditions (1 atm, 20 ºC), and turns unfavorable at
higher temperatures.
Keq O
2 R-OH + CO 2 R R + H2O ΔHº - -5 Kcal•mol-1 (1)
O O
ROH
R-OCOO-R + [M]-OCOOH
Scheme 1
59
OC-20
O O
O R O O O R
PPh2 PPh2 PPh2 PPh2
1 R = ethyl 2
R = (S)-1- methylpropyl 3
R = (S)-1-(4-isobutylphenyl)ethyl 4
Figure 1 DPE backbone modifications.
Apart from the synthesis, the coordination chemistry of the new ligands was investigated.
Their selectivity in homogeneous catalysed reactions, as e.g palladium catalysed allylic
substitution, was explored as well.
[1] Kamer, P. C. J., van Leeuwen, P. W. N. M., Reek, J. N. H., Acc. Chem. Res. 2001, 34, 895-904.
[2] Kranenburg, M., Kamer, P. C. J., Van Leeuwen, P. W. N. M., European Journal of Inorganic
Chemistry 1998, 155-157.
60
OC-21
Our work concerns the application of catalytic reactions for the synthesis of new
pharmacologically interesting compounds. 1 Recently, we have been interested in the synthesis
of novel pyrrolo-azepinone analogues. 2 These seven-membered rings are present in a wide
number of natural and synthetic products such as Hymenialdisine, Stevensine, Latonduine and
Paullones. Aziridines own properties as kinase inhibitors and therefore are promising
therapeutic molecules for treatment of a number of diseases including cancer. 3
In the last years, intramolecular cyclization reactions of pyrroles or indoles with alkynes
catalyzed by transition-metal have been reported. 4
We have synthesized, in only two steps, novel pyrrolo-azepinone analogues by a Sonogashira
reaction followed by a AuIII or PtIV-catalyzed intramolecular cyclization reaction.
R R
R
PdCl2(PPh3)2 H2PtCl6x6H2O N
N N N N
N CuI, THF/TEA N or AuCl3 N
O 60 °C, 20 h O (5 mol%) O O
R-X
1 2 3 4
1
a) Schwarz, N.; Pews-Davtyan, A.; Michalik, D.; Alex, K.; Tillack, A.; Diaz, J. L.; Beller, M.; Eur. J. Org.
Chem., 2008, 32, 5425–5435; b) Alex, K.; Tillack, A.; Schwarz, N.; Beller, M.; Angew. Chem. Int. Ed., 2008, 47,
2304–2307.
2
a) Mangu, N.; Kaiser, H. M.; Kar, A.; Spannenberg, A.; Beller, M.; Tse, M. K.; Tetrahedron, 2008, 64, 7171–
7177; b) Kaiser, H. M.; Zenz, I.; Lo, W. F.; Spannenberg, A.; Schröder, K.; Jiao, H.; Gördes, D.; Beller, M.;.
Tse, M. K; J. Org. Chem., 2007, 72, 8847–8858.
3
Meijer, L.; Thunnissen, A. M.; White, A. W.; Garnier, M.; Nikolic, M.; Tsai, L. H.; Walter, J.; Cleverley, K.
E.; Salinas, P. C.; Wu, Y. Z.; Biernat, J.; Mandelkow, E. M.; Kim, S. H.; Pettit, G. R.; Chem. Biol., 2000, 7, 51–
63.
4
a) Ferrer, C.; Amijs, C. H. M.; Echavarren, A. M.; Chem. Eur. J., 2007, 13, 1358–1373; b) England, D. B.;
Padwa, A.; Org. Lett., 2008, 10, 3631–3634; b) Putey, A.; Joucla, L.; Picot, L.; Besson, T.; Joseph, B.;
Tetrahedron, 2007, 63, 867–879.
61
OC-22
José M. Fraile, José I. García, Clara I. Herrerías, Beatriz López-Sánchez, José A. Mayoral,
Ignacio Pérez, Elisabet Pires and Marta Roldán
Departamento de Química Orgánica, Instituto de Ciencia de Materiales de Aragón and Instituto Universitario de
Catálisis Homogénea, Facultad de Ciencias, Universidad de Zaragoza-C.S.I.C., 50009 Zaragoza, Spain
Figure 1. Products distribution of three different enantioselective reactions in homogeneous and heterogeneous
phase (laponite supported catalysts): in blue trans (cyclopropanation) or syn isomers (enantiomers are
represented by different tones), and in orange cis or anti isomers.
The effect can be either an improvement of both types of selectivity in the case of the
insertion reaction, from 51 to 73% overall selectivity for the major syn isomer, or even a
complete reversal of both selectivities in the case of cyclopropanation, leading in
heterogeneous phase to a major cis isomer of opposite absolute configuration to that of the
major trans isomer obtained in solution with much better overall selectivity. Probably the best
result to date is that obtained in Mukaiyama aldol reaction. From low diastereoselectivity for
syn isomers and nearly zero enantioselectivity in solution, an excellent enantioselectivity of
anti isomer is obtained with the heterogeneous catalyst, even allowing the determination of
both relative and absolute configurations of the major product. The effects of the support are
only obtained with clays and are highly dependent on the chiral ligand and the structure of the
reagents.
It can be concluded from those results that the support is not necessarily negative in an
immobilized catalyst and heterogeneous and homogeneous chiral catalysts can be
complementary when different isomers are obtained in the same enantioselective reaction.
1. J. I. García, B. López-Sánchez, J. A. Mayoral, E. Pires, I. Villalba, J. Catal. 2008, 258, 378.
2. J. M. Fraile, J. I. García, J. A. Mayoral, M. Roldán, Org. Lett. 2007, 9, 731.
3. M. J. Fabra, J. M. Fraile, C. I. Herrerías, F. J. Lahoz, J. A. Mayoral, I. Pérez,, Chem. Commun. 2008, 5402.
4. J. M. Fraile, J. I. García, C. I. Herrerías, J. A. Mayoral, E. Pires, Chem. Soc. Rev. 2009, 38, 695.
62
OC-23
Montserrat Gómez,* Jérôme Durand, Fernando Fernández, Susanna Jansat, Isabelle Favier
and Emmanuelle Teuma
Université Paul Sabatier, Laboratoire Hétérochimie Fondamentale et Appliquée UMR CNRS 5069,
118 route de Narbonne, 31062 Toulouse, France. gomez@chimie.ups-tlse.fr
The design of synthetic strategies involving multi-step processes in one-pot procedure is a key
challenge for fine chemical industry, in order to achieve ecologically and economically
favourable production, taking into account the costs, solvent toxicity and materials
purification [1]. For metal-catalyzed processes, the use of a single catalyst for different kind
of reactions is especially attractive. As known, metallic nanoparticles (NP) used as catalytic
precursors in wet medium can behave as reservoir of molecular species and also can give a
surface-like reactivity, depending on the reaction conditions [2]. This “dual” catalytic
behaviour shows an enormous potential in complex transformations in order to economize
purification steps. This approach becomes notably appropriated in ionic liquid (IL) medium
due to the enhanced stability of the nanoclusters [3].
In this communication, the use of preformed PdNP in ionic liquids as catalytic precursors for
C-C bond formation (Suzuki and Heck couplings) and hydrogenation processes will be
discussed, mainly concerning the nature of the palladium active species involved [4]. These
results have led us to the application of IL-stabilized PdNP in sequential Heck/hydrogenation
processes, under base-free conditions allowing the regeneration of nanoparticles after the
coupling step [5].
R-X
1st
R' R'
R'
R R
2nd
H2
References:
[1] J.-C. Wasilke, S. J. Obrey, R. T. Baker and G. C. Bazan, Chem. Rev., 2005, 105, 1001.
[2] For a recent review, see: J. Durand, E. Teuma and M. Gómez, Eur. J. Inorg. Chem., 2008, 23, 3577.
[3] (a) J. Dupont, R. F. de Souza and P. A. Z. Suarez, Chem. Rev., 2002, 102, 3667. (b) P. Wassersheid and W.
Keim, Angew. Chem. Int. Ed., 2000, 39, 3772. (c) H. Olivier-Bourbigou and L. Magna, J. Mol. Catal. A:
Chemical, 2002, 182-183, 419.
[4] (a) J. Durand, E. Teuma, F. Malbosc, Y. Kihn and M. Gómez, Catal. Commun., 2008, 9, 273. (b) F.
Fernández, B. Cordero, J. Durand, G. Muller, F. Malbosc, Y. Kihn, E. Teuma and M. Gómez, Dalton Trans.,
2007, 5572.
[5] S. Jansat, J. Durand, I. Favier, F. Malbosc, C. Pradel, E. Teuma and M. Gómez, submitted.
63
OC-24
Supported Ionic Liquid Phase (SILP) catalysts are new materials consisting of an ionic liquid,
a metal catalyst and a porous support.[1] The catalyst is dissolved in the ionic liquid which
itself is dispersed as a thin film on the inorganic support. This application combines both the
advantages of homogeneous and heterogeneous catalysis and thus bridges the gap between
traditional homogeneous and heterogeneous catalysis.[2] Especially continuous, gas-phase
reactions like hydroformylation or water gas shift reaction are highly suited for this novel and
innovative technology.
3.5 160
TOF
3.0
Temperature
150
2.5
Temperature / °C
140
2.0
-1
TOF / h
1.5
130
1.0
120
0.5
0.0 110
65 70 75 80 85
Time / h
Left: schematic representation of SILP catalytic materials. Right: Steady-state kinetic studies of homogeneous
hydroformylation Rh-SILP catalysts.
Preliminary spectroscopic studies in the hydroformylation reaction indicated that the catalyst
complex is truly of homogeneous nature in the ionic liquid film and that no interactions occur
between the complex and the support.
Due to the fact that the homogeneous catalyst operates under steady state conditions, in strong
contrast to batch screening experiments, it is possible to determine kinetic parameters in a fast
and reliable manner.
In automated reactor setups it was possible to determine activation energy, reaction orders as
well as reproducibility and stability parameters for a single catalyst within less than 24 h. We
therefore anticipate the SILP concept to be highly attractive for future catalyst screening
processes.
References:
[1] Riisager, A.; Fehrmann, R.; Flicker, S.; van Hal, R.; Haumann, M.; Wasserscheid, P. Angew. Chem. Int. Ed.
2005, 44, 185.
[2] Riisager, A.; Fehrmann, R.; Haumann, M.; Wasserscheid, P. Eur. J. Inorg. Chem. 2006, 695.
64
OC-25
Physical properties of Ionic Liquids, such as ion pairing, can have great influence on the
selectivity in chemical reactions. Aside from structural analysis, NMR-Spectroscopy offers a
lot of experiments, which helps to get a better understanding in Ionic Liquids´ physical
properties.
For the hydrogenation of prochiral keto-functionalized imidazolium IL (1) a strong
dependency of chirality transfer from anion to cation and ion pairing effects were found 1 . The
ion pairing effects are investigated by Diffusion-Ordered NMR (DOSY-NMR)-Spectroscopy
experiments that give access to translational diffusion coefficients of anions and cations in
dependence of temperature and concentration 2 . With the help of conductivity measurements
and the Nernst-Einstein-equation the degree of dissociation is calculated.
O OH
SO3- 60 bar H2, 60°C SO3-
N + N O N + N O
*
[Ru/C]
1 2
1
P. S. Schulz, N. Müller, A. Bösmann and P. Wasserscheid, Angew. Chem. Int. Ed., 2007, 46, 1293
2 K. Schneiders, A. Bösmannn, P.S. Schulz, P. Wasserscheid, Adv. Syn. Cat.2009
3 D. Zuccaccia, A. Macchioni, Organometallics 2005, 24, 3476-3486
4 A.Riisager, R.Fehrmann, M.Haumann, P.Wasserscheid, Eur. Jour. of Inorg. Chem. 2006, 4, 695-706.
65
OC-26
The ultimate goal in the development of more efficient catalytic materials is to combine the
selectivity, specificity and synthetic availability offered by a homogeneous catalyst with the
ease of processing and the robustness that can be realized with heterogeneous catalysts.
A very promising concept towards this goal of molecular catalysis in heterogeneous systems
is the “Supported Ionic Liquid Phase (SILP)” catalyst technology. In a SILP catalyst an ionic
liquid containing a dissolved transition metal complex is dispersed over the high internal
surface of a porous support. Due to the very good wettability of ionic liquids on typical
inorganic supports and due to the strong capillary forces, a material results that is
macroscopically a dry solid but still contains the dissolved catalyst in its film on support. Due
to the extremely low vapour pressure of ionic liquids the SILP materials show excellent
stability in continuous gas phase contact (up to 1100 h time-on-stream demonstrated). A
schematic representation of a SILP-catalyst is shown in Figure 1.
66
OC-27
Cellulose can be used as a great bio-renewable source of many different compounds, e.g.
sorbitol and ethanol. Today the problem of biofuels is quite important because sources of
fossil fuels will be exhausted in the long run and fossil fuels utilization is linked to excessive
production of greenhouse gases. In contrast to fossil fuels, cellulose-containing biomass is
easily available as plant material. [1, 2]
Ionic liquids gained a great interest because it was proposed that they could replace
conventional organic solvents in many cases. For cellulose processing they should especially
be useful because there is only one well known classical solvent for this biopolymer –
Schweizer’s reagent, an ammoniacal solution of copper monoxide. This solvent is too
polluting to be used in contemporary technologies. Moreover, cellulose hydrogenolysis in
Schweizer’s reagent gives only deep-degradation products – isopropyl alcohol, 1-hydroxy-2-
propanone, propane-1,2-diol, CO2, CH4 etc. [3]
Our catalytic experiments started from simple compounds that mimic structural motivs of
cellulose, e.g. ketals or cellobiose. Eventually, new conditions were identified for cellulose
hydrogenolysis to sorbitol in an ionic liquid. The ionic liquid-of-choice is 1-butyl-3-methyl
immidazolium chloride. The chloride anion, as a small hydrogen bond acceptor, destructs the
three-dimensional network of cellulose OH-groups. [4] Imidazolium salts seem to be the most
effective, with the smallest imidazolium cation exhibiting the easiest dissolution. [1]
The conditions include application of two catalysts including one homogeneous and one
heterogeneous catalyst: HRu(Cl)(CO)(PPh3)3 and Pt/C. The homogeneous catalyst
[HRu(Cl)(CO)(PPh3)3] requires the presence of base as the promoter. While the Pt/C is
mainly involved in the hydrogenation of the intermediate glucose, the role of the
homogeneous Ru complex is less clear. It might play a role in the activation of the
carbohydrate residues in cellulose, but this is at present being elucidated.
The presence of all of three components (two catalysts and one promoter, KOH) is essential to
get high product yields. We reached ca. 100% cellulose conversion with sorbitol as the major
product (51 % selectivity) and glucose as the other product. The pressure (35 bars of H2) and
temperature (150 °C) employed are lower than in many other examples reported for similar
reactions. [3, 5, 6]
References
1. Patent WO 03/029329 A2, 2003.
2. P.L. Dhepe, A.Fukuoka. Cracking of Cellulose over Supported Metal Catalysts. // Catal Surv Asia. 2007. V
11. P. 186-191.
3. Patent US 2488722, 1946
4. J. Wu, J. Zhang, H. Zhang, J. He, Q. Ren, M. Guo. Homogeneous Acetylation of Cellulose in a New Ionic
Liquid. // Biomacromolecules. 2004. V. 5. P. 266-268.
5. P. A. J. Gorin. Hydrogenolysis of Carbohydrates: VIII. Comparative Studies on Methyl Glucopyranosides.
// Can. J. Chem. 1960. V. 38. P. 641–651.
6. P.L. Dhepe, A. Fukuoka. Cellulose Conversion under Heterogeneous Catalysts. // ChemSusChem. 2008.
969-975.
67
OC-28
In pursuit of solar energy conversion into a fuel by light-driven water splitting into H2 and
O2, mononuclear Ru(II) complexes have been designed and synthesized as molecular
catalysts for light-driven water oxidation which is still the bottleneck of the entire process.
These molecular Ru(II) complexes showed efficiently catalytic properties towards both
chemically and photochemically driven water oxidation in homogeneous solution. The
turnover number of water oxidation by one Ru(II) catalyst reached 100 driven by visible light.
During the process of oxygen evolution, a rare seven-coordinate Ru(IV) dimer complex
containing a [HOHOH]− bridging ligand has been successfully isolated as an active
intermediate, showing that water can attack directly to high valent six-coordinate Ru(IV)
complex without ligand exchange. This work contributes to a deeper understanding of the
reaction mechanism for catalytic water oxidation and will provide new possibilities for the
design of more efficient catalysts for light-driven water oxidation.
Fig. 1 Visible light driven water oxidation with a three component system in pH 7.0 aqueous
solution containing a photosensitizer, a sacrificial electron acceptor and a molecular catalyst.
1. S. Ott, M. Kritikos, B. Åkermark, L. Sun, R. Lomoth, Angew. Chem. Int. Ed. 2004, 43, 1006-1009.
2. L. Sun, B. Åkermark, S. Ott, Coord. Chem. Rev. 2005, 249, 1653-1663.
3. Y. Na, M. Wang, J. Pan, P. Zhang, B. Åkermark, L. Sun, Inorg. Chem. 2008, 47, 2805.
4. Y. Xu, T. Åkermark, V. Gyollai, D. Zou, L. Eriksson, L. Duan, R. Zhang, B. Åkermark, L. Sun, Inorg.
Chem. 2009, 48, 2717-2719.
68
OC-29
Mei Wang, Pan Zhang, Yong Na, Jingxi Pan, Xueqiang Li and Licheng Sun
State Key Laboratory of Fine Chemicals, DUT-KTH Joint Education and Research Centre on Molecular Devices,
Dalian University of Technology, Dalian 116012, China; Department of Chemistry, Royal Institute of
Technology (KTH), 10044, Stockholm, Sweden
In recent years, much progress has been achieved in developing and understanding of
photoinduced H2 production by using homogeneous molecular catalyst systems, which are
mainly composed of a metal-containing photosensitizer (PS), a molecular catalyst based on Pt,
Pd, Rh, Co, and Fe, as well as sacrificial electron donor. We have demonstrated that the three-
component system of Ru(bpy)32+, an [Fe2S2] complex, and ascorbic acid is catalytically active
for photoinduced H2 production with TON up to 86 based on the Ru PS under an optimal
condition.1 Coordinately self-assembled Zn(II) porphyrin-diiron dyads were found to evolve
H2 in action of visible light by Kluwer and us independently.2,3 To improve the efficiency of
the catalyst system, we have recently studied the three-component system with a
cyclometalated iridium complex as PS, an [Fe2S2] catalyst, and triethylamine (TEA) as an
electron sacrificer, which displays apparently higher activity and longer lifetime for the
photoinduced H2 production as compared to other Fe-based catalyst systems either with
Ru(bpy)32+ or Zn(II)-porphyrins as PS. Preliminary studies show that an attractive catalyst
system of a cheap organic PS, a cobaloxime complex, and a tertiary amine is also
catalytically active for H2 production in an aqueous solution.
Fig. 1 (a) The Fe-based catalyst system with a cyclometalated iridium complex as PS in acetone/water and
(b) the Co-based catalyst system with a cheap organic PS in water.
References:
[1] Y. Na, M. Wang, J. Pan, B. Åkermark L. Sun, Inorg. Chem. 2008, 47, 2805−2810.
[2] A.M. Kluwer, R. Kapre, F. Hartl, M. Lutz, A.L. Spek, A.M. Brouwer, P.W.N.M. van Leeuwen, J.N.H. Reek,
Proc. Natl. Acad. Sci. 2009, doi: 10.1073/pnas.0809666106.
[3] X. Li, M. Wang, S. Zhang, J. Pan, Y. Na, J. Liu, B. Åkermark, L. Sun, J. Phys. Chem. B 2008, 112, 8198–
8202.
Acknowledgment. This work was supported by the National Science Foundation of China (No. 20633020), the
National Basic Research Program of China (No. 2009CB220009), the Swedish Energy Agency, the Swedish
Research Council, and the K & A Wallenberg Foundation of Sweden.
69
OC-30
In the perspective of a hydrogen economy, one major issue concerns the availability of
economically viable methods for the production of H2 from renewable sources. Reduction of
protons is apparently a very simple reaction but unfortunately, except on platinum metals
electrodes, suffers from kinetic limitations and is generally not observed at potentials near
equilibrium (–400 mV vs SHE at pH 7 in water) but requires the application of an
overvoltage. The development of new homogeneous electrocatalysts for hydrogen evolution
based on cheap first-row transition metals has been a long-date goal for inorganic chemists.
We will report and discuss on the activity of various cobalt and nickel complexes including
the cobaloxime [Co(dmgBF2)2(OH2)2], as electrocatalysts for the reduction of a variety of
acids with different pKas in non-aqueous solvents.
In a second step, the cobalt catalysts have been coupled with photosensitive metal-diimine
moieties in order to make supramolecular variants of the system previously studied by Lehn et
al. for the photoproduction of H2. In these molecular devices, the intramolecular electron-
transfer from the photoactivated center to the catalytic center can be controlled in a larger
extend avoiding charge recombination processes, than in intermolecular systems by a fine
tuning of the distance between metal centers and the nature of the bridge. Such an organized
assembly is found with photosystem I tightly coupled to hydrogenase enzymes in hydrogen-
evolving green-algae. These photocatalysts are able to achieve hydrogen photo-production in
non-aqueous solvents with the highest efficiencies so far reported for such devices and
already compete with similar systems based on molecular photosensitizers but using Pt
nanoparticles as the catalytic centers.
References:
Razavet, M.; Artero, V.; Fontecave, M. Inorg. Chem., 2005, 44, 4786.
Baffert, C.; Artero, V.; Fontecave, M. Inorg. Chem., 2007, 46, 1817.
Hu, X.; Cossairt, B. M.; Brunschwig, B. S.; Lewis, N. S.; Peters, J. C. Chem. Commun., 2005, 4723.
Hawecker, J.; Lehn, J.-M.; Ziessel, R. Nouv. J. Chim. 1983, 7, 271.
Fihri, A.; Artero, V.; Razavet, M.; Baffert, C.; Leibl, W.; Fontecave, M., Angew. Chem. Int. Ed. 2008, 47, 564.
Fihri, A.; Artero, V.; Pereira, A.; Fontecave, M., Dalton transaction 2008, 5567.
Du, P.; Knowles, K.; Eisenberg, R., J. Am. Chem. Soc., 2008, 130, 12576.
Du, P.; Schneider, J.; Luo, G.; Brennessel, W.; Eisenberg, R., Inorg. Chem., doi: 10.1021/ic900389z
Probst, B.; Kolano, C.; Hamm, P.; Alberto, R., Inorg. Chem. 2009, 48, 1836.
70
OC-31
Photocatalytic splitting of water into hydrogen and oxygen using photochemical molecular
devices requires a combination of photochemically and redox active metal centres, a bridging
ligand and a catalytic centre. Several of these devices already exist for the hydrogen
production, however to the best of our knowledge none of them is stable against oxygen.1 As
oxygen is the final oxidation product of the overall water splitting this stability is crucial. We
here present a study on Ru-BL-M systems which produce hydrogen and show a significant
stability against oxygen. The ruthenium centre contains as bridging ligand 4,4’-dinitril-2,2’-
bipyridine.3
71
OC-32
Björn Åkermark,1 Yunhua Xu,2 Viktor Gyollai,2 .Yan Gao,1 Jianhui Liu,3 Torbjörn
Åkermark,4 Licheng Sun2
1
Department of Organic Chemistry, Arrhenius Laboratory, Stockholm University, SE-106 91 Stocjholm, Sweden
2
Department of Chemistry, Royal Institute of Technology (KTH), 10044 Stockholm, Sweden
3
State Key Laboratory of Fine Chemicals, DUT-KTH Joint Education and Research Centre on Molecular
Devices, Dalian University of Technology, Dalian 116012, China;
4
Department of Chemical Technology, Royal Institute of Technology (KTH), 10044 Stockholm, Sweden
During the last 20 years, extensive efforts have been devoted to the development of systems
for converting solar energy and water into a fuel, by reducing either protons to hydrogen or
carbon dioxide to eg methanol. Much of the work has been based on modeling natural
photosynthesis. In PS II, the electrons that are used for reduction of carbon dioxide are
abstracted from water, converting two molecules of water into molecular oxygen and protons.
Not surprisingly, this turns out to be a very difficult process to model. A break through in our
own efforts was the preparation of a complex, where a ruthenium photosensitizer is linked to
a dinuclear manganese moiety and able to oxidize this stepwise from MnII/II to MnIII/IV.
However, on further oxidation, the ligand appears to be oxidized instead of water. We have
therefore studied a considerable number of dinuclear manganese complexes with more sturdy
ligands, but so far these experiments have been unsuccessful. However, ligands based on
corroles have been more successful, and we have recently shown that electrochemical
oxidation of water can be accomplished by a dinuclear Mn-corrole complex. Using a corrole
complex, we have also been able to demonstrate for the first time that nucleophilic attach by
hydroxide on a Mn(V) oxo complex is a viable mechanism for the formation of the crucial O-
O bond in water oxidation.
Since ruthenium complexes have long been known to catalyze water oxidation, we have also
recently prepared the dinuclear Ru(II) complexes 1-3, and shown that these complexes are
efficient catalysts for water oxidation. These complexes still require stronger oxidants than
Ru(III)(bpy)3 to convert water into oxygen but a further development along these lines is
presented in the following report by Prof Sun.
N N
N N N O N O
Ru O Ru
N N N N
N N N N
Ru Ru N N N N N N N N
N Cl N O Ru Ru
N N O N N
O
PF6 PF6
3PF 6 N N
1 2 3
72
OC-33
The Wacker process was the first organometallic catalytic oxidation industrially applied[1,2]
and it involves the oxidation of ethylene to acetaldehyde in aqueous solvent.
The most controversial reaction step is the hydroxypalladation of ethene. The debate relies on
the mode of the water nucleophilic attack on ethene: (a) via an inner-sphere mechanism from
a coordinated water to palladium (syn-addition), or (b) via an outer-sphere mechanism of a
water molecule from the bulk (anti-addition). This step has been intensively investigated both
experimentally and theoretically but the dicotomy between both mecanism has been not
entirely solved.[3,4] This controversy about the nucleophilic addition in the Wacker process
has been addressed by means of first principles molecular dynamics simulations in a box
containing 26 water molecules. The two modes for the nucleophilic attack, syn-inner sphere
and anti-outer sphere mechanisms along with the new found alternatives have been evaluated.
The free energy barriers obtained for the anti additions are in very good agreement with
experiment, and significantly lower than that for the syn additions. Additionally, this work
shows that metadynamics coupled with Car-Parrinello Molecular Dynamics offers a very
efficient framework to investigate and understand transition metal catalyzed reactions in
aqueous phase and may help to develop other aqueous phase processes, a key challenge in
green chemistry.
O
1/2 O2
2HCl
H
+
H2O Cl 2-
2CuCl
C2H4
2CuCl2 Cl Pd Cl
-H + Cl-
Cl Cl
Cl
Cl Pd anti-outer
OH H2O Cl H2O
Pd
Cl-
HCl
Cl Cl
Cl
Cl b
Cl Pd CH2 Cl Pd
Cl Pd a
H CHOH OH2
OH Cl
H
H+
syn-inner Cl Pd
OH
[1] J. Smidt, W. Hafner, R. Jira, J. Sedlmeier, R. Sieber, R. Ruttinger, H. Kojer, Angew. Chem. Int. Ed.
1959, 71, 176.
[2] J. Smidt, J. Sedlmeier, W. Hafner, R. Sieber, A. Sabel, R. Jira, Angew. Chem. Int. Ed. 1962, 74, 93.
[3] P. E. M. Siegbahn, J. Phys. Chem. 1996, 100, 14672.
[4] J. A. Keith, R. J. Nielsen, J. Oxgaard, W. A. Goddard, J. Am. Chem. Soc. 2007, 129, 12342.
73
OC-34
Yurii V. Geletii, Claire Besson, Zhuangqun Huang, Yu Hou, Qiushi Yin, Djamaladdin G.
Musaev, David Quinonero, Alexsey Kuznetsov, Rui Cao, Kenneth I. Hardcastle, Anna
Proust,* Bogdan Botar,** Paul Kögerler,** Tianquan Lian and Craig L. Hill
Department of Chemistry and Cherry L. Emerson Center for Scientific Computation, Emory University, Atlanta,
GA 30322, USA. *IPCM, Université Pierre et Marie Curie, 4 Place Jussieu, F-75005 Paris. **Institut für
Festkörperforshung, Forshungszentrum Jülich GmbH, G-52425
Dioxygen is formed quickly under visible light (420-520 nm) illumination, while persulfate is
consumed. The O2 yield (per persulfate, eq 2) is ca 40% with TON up to ~3.5x102 and with a
turnover frequency up to ~3x102 h-1. The quantum yield is estimated to be ≥ 9%.
Acknowledgement. This work was supported by the U.S. Department of Energy (DE-FG02-03ER-15461 and
DE-FG02-07ER-15906).
(1) Geletii, Y. V.; Botar, B.; Kögerler, P.; Hillesheim, D. A.; Musaev, D. G.; Hill, Craig L. Angew. Chem. Int.
Ed. 2008, 47, 3896.
(2) Sartorel, A.; Carraro, M.; Scorrano, G.; Zorzi, R. D.; Geremia, S.; McDaniel, N. D.; Bernhard, S.; Bonchio,
M. J. Am. Chem. Soc 2008, 130, 5006.
74
OC-35
Philippe Kalck
Université de Toulouse, Laboratoire de Chimie de Coordination UPR8241, Equipe de Catalyse et Chimie Fine,
composante ENSIACET-Institut National Polytechnique de Toulouse, 118, route de Narbonne, 31077 Toulouse
Cedex (France)
In order to have an access to the intimate running of a catalytic system, it is most often
necessary to make extensive kinetic studies and to validate the existence of short-lived
intermediate species. Spectroscopic studies performed in the real catalytic conditions allow
identifying key complexes, provided the concentrations of the species are sufficiently high.
However, it is necessary to identify if these species are involved in the catalytic cycle or are
derived complexes. In our laboratory, we have developed high pressure-infrared and -NMR
studies, which are powerful tools to follow in situ carbonylation reactions mainly catalysed by
noble metals. Moreover, using labelled reactants, such as 13CO, 13CH3I, provides more precise
information leading to a better understanding of the catalytic system.
Thus, we have been able to intercept a pentacoordinated palladium species,
[Pd(H)(SnCl3)(CO)(PCy3)2], supporting the presence of an active hydrido-palladium entity
involved in the alkoxycarbonylation reaction of alkenes to produce the corresponding esters.
Similarly, we succeeded in demonstrating that the active species in the hydroformylation
reaction of alkenes, using a cobalt/pyridine system in a ionic liquid medium, is the
[Co(H)(CO)4] hydride under working conditions (100 bar, 120°C), whereas under ambient
conditions the [Co(py)6][Co(CO)4]2 is recovered in the ionic liquid phase.
Moreover, we were able to identify the exact role played by platinum to assist the iridium
catalyst in the methanol carbonylation reaction leading to acetic acid. This determining step is
shown below on the Figure:
Me Me I Me
OC - I OC I - OC I
Ir Ir Pt CO Ir
OC I OC I OC I
I I I
OC I I [MeIrI3(CO)2]-
1/2 Pt Pt
I I CO
I - I
Pt
I CO OC I-
Me I
More recently we have extent our studies to selective hydrogenation reactions.
Main references:
D. H. Nguyen, G. Laurenczy, M. Urrutigoïty et Ph. Kalck, Eur. J. Inorg. Chem. (2005) 4215-4225
F. Hébrard, Ph. Kalck, L. Saussine, L. Magna and H. Olivier-Bourbigou, Dalton Trans. (2007) 190-191
S. Gautron, N. Lassauque, C. Le Berre, Ph. Serp, L. Azam, R. Giordano, G. Laurenczy, D. Thiébaut and Ph. Kalck,
Eur. J. Inorg. Chem. (2006) 1121-1126
75
OC-36
Current interest in calcium organometallic species stems from their rapid-growing application
as green catalysts, as well as from calcium’s wide accessibility and low cost. These reagents
have been shown to be active in key transformations, including i.a. styrene polymerization,
olefin hydrosilylation and even hydrogenation.1 Ideally, organometallic synthesis would allow
access to tailor-made catalysts of the type [Ca(LS)(LR)], where LS is a spectator ligand and LR
is a reactive moiety able to initiate catalysis. However, the Schlenk equilibrium often
interferes and redistribution of ligands affords a mixture of homoleptic species:2
LR LS Ca LS
S R S R
2 L Ca L L Ca Ca L +
LS LR Ca LR
In order to overcome this problem, grafting of calcium reagents onto silica appears as a
promising strategy. Using a rationale approach, we have been able to generate catalytic
materials bearing single site species of the type (≡SiO)Ca(LR) (where LR is a benzyl or amide
ligand).3 These materials have been fully characterized, most particularly using high field
solid-state-NMR (18.8T). Model studies on molecular compounds have demonstrated that
access to stable heteroleptic siloxybenzyl or amide calcium derivatives is not possible,
demonstrating the validity of our grafting approach.
These hybrid materials are active in several catalytic processes, with remarkable properties. In
styrene polymerisation, dramatic increase in syndiospecifity compared to molecular catalysts
is observed, while good activities in olefin hydrosilylation are obtained. Recycling of the
catalyst is hampered by deactivation, for which we propose mechanisms based on
spectroscopic studies.
1)
a) S. Harder, F. Feil, K. Knoll, Angew. Chem. Int. Ed. 2001, 40, 4261; b) M. R. Crimmin, I. J. Casely, M. S.
Hill, J. Am. Chem. Soc. 2005, 127, 2042; c) F. Buch, J. Brettar, S. Harder, Angew. Chem. Int. Ed. 2006, 45,
2741; d) J. Spielmann, F. Buch, S. Harder, Angew. Chem. Int. Ed. 2008, 47, 9434.
2)
W. Schlenk, W. Schlenk, Jr., Ber. Dtsch. Chem. Ges. 1929, 62B, 920-924
3)
R. M. Gauvin, F. Buch, L. Delevoye, S. Harder, Chem. Eur. J. 2009, 15, 4382-4393.
76
OC-37
Emmanuelle Göthelid, Kristofer Eriksson, Jan-E. Bäckvall, Carla Puglia, Winnie Chow and
Sven Oscarsson*
Dept. of Physics and Materials Sciences, Uppsala University, Box 530, S-75121, Uppsala, Sweden
77
OC-38
Gary A. Attard
School of Chemistry, Cardiff University, Park Place, Cardiff CF10 3AT, UK
There are two ways in which chirality may be bestowed on a metal surface. The first is to
synthesise an intrinsically chiral surface from a single crystal by judicious choice of an
appropriate Miller index surface plane [1]. The second is to adsorb a chiral organic molecule
onto the metal surface such that chiral adsorption sites associated with the organic adsorbate
are produced [2]. Both methods of surface modification will be described with emphasis
placed on changes in surface chirality engendered by variations in surface composition. In
particular, the use of bimetallic PtPd surface alloy films supported on Pt{hkl}r/s electrodes
will be discussed in relation to D- and L- glucose electrooxidation and compared with
previous results obtained using both Pt{hkl}r/s and bulk alloy PtPd{hkl}r/s surfaces [3].
Furthermore, new results for the enantioselective hydrogenation of ethyl pyruvate on
bimetallic supported catalysts in the presence of cinchona alkaloid modifiers will be used to
confirm the pre-eminence of platinum as being the best catalyst for this particular chemical
transformation. The use of surface-enhanced Raman spectroscopy to identify surface
intermediates will also be discussed.
50
60
}
50 40
Enantiomeric Excess / % R
40 Steps
30
30
20
Terraces
20
10
10
0
0
0 1 2 3 4 5 6
0 1 2 3 4 5
θPd θPt
References
[1]C.F. McFadden, P.S. Cremer, A.J.Gellman, Langmuir 12 (1996) 122483.
[2] M. Studer and H.-U. Blaser, Adv. Syn. & Catal. 45 (2003).
[3] D.J. Watson and G.A. Attard, Electrochimica Acta 46 (2001) 3157.
78
Posters
P1-P154
79
80
P-1
ZSM-5 zeolite due to its unique channel structure, thermal stability, acidity and shape-
selective property, has been used as sorbent and catalyst in several petrochemical processes,
fine chemical reactions, and liquid and gas separation [1, 2]. ZSM-5 zeolites show excellent
catalytical performance in a lot of organic transformation reactions. Zeolites catalysts are used
to produce hundred millions of barrel of petroleum every year [3]. Protonic zeolites find
industrial applications as acid catalysts in several hydrocarbon conversion reactions [4, 5].
HZSM-5 zeolite was successfully synthesized with different silicon to aluminum molar ratios
(Si/Al) in range of 14.5 to 58. As synthesized zeolites were characterized using FT-IR, XRD,
and SEM techniques. The nuclear as well as side-chain bromination of activated aromatic
substrates has been achieved in high yields and substantial regioselectivity with N-
boromosaccharins (NBSac) over HZSM-5. Successful bromination of phenol has been
achieved on the examined HZSM-5 catalysts. Catalyst sample with Si/Al of 58 was shown the
highest reaction yield in the lowest times.
References
[1] C. Falamaki, M. Edrissi, M. Sohrabi, Zeolite, 19 (1) (1997) 2-8.
[2] N. Kumar, V. Nieminen, K. Demirkan, T. Salmi, D. Y. Murzin, E. Laine, Appl. Catal. A: Gen. 235 (2002)
113-123.
[3] J. Shan, L.Shituna, L.F. Wang; J.MOL.Catal.16 (5) (2002) 379.
[4] N.Y. Chen, W.E. Garwood, F.G. Dwyer, Shape Selective Catalysis in Industrial Applications, 2nd ed.,
Dekker, New York, 1996.
[5] M. Guisnet, J.P. Gilson (Eds.), Zeolites for Cleaner Technologies, Imperial College Press, London, 2002.
81
P-2
O OH
1. Fe(OAc)2
P
Ligand R' P
R' or
(EtO)2MeSiH or PMHS
R THF, RT R P
2. aq. base
up to 99% yield,
99% ee Tricyclohexylphosphine (S,S)-Me-DUPHOS
1 (a) For a review on iron catalysis see: Bolm, C.; Legros, J.; LePaih, J.; Zani, L. Chem. Rev. 2004, 104, 6217-
6254. (b) Enthaler, S., Junge, K., Beller, M., Angewandte Chemie Int. Ed. 2008, 47, 3317.
2
Nishiyama, H., Furuta, A., Chem. Commun. 2007, 760–762.
3
B. K. Langlotz, H. Wadepohl, L. H. Gade, Angew. Chem. Int. Ed. 2008, 47, 4670–4674.
4
N. Shaikh, K. Junge, S. Enthaler, M. Beller, Angew. Chem. Int. Ed. 2008, 47, 2497–2501.
5
D. V. Gutsulyak, L. G. Kuzmina, J. A. K. Howard, S. F. Vyboishchikov, G. I. Nikonov, J. Am. Chem. Soc.
2008, 130, 3732-3733.
6
A. M. Tondreau, E. Lobkovsky, P. J. Chirik, Org. Lett. 2008, 10, 2789-2792.
82
P-3
Amino acid derived thioamides and hydroxamic acids have been used as ligands in the
rhodium catalyzed asymmetric transfer hydrogenation of prochiral ketones in 2-propanol.
Interestingly, the use of the two different types of ligands resulted in products of opposite
configuration. [1,2]
A structure/activity correlation with differently functionalized or substituted ligands was
investigated. The results indicate that the enantioswitchable nature of the thioamide- and
hydroxamic acid based catalysts originates from the coordination mode of ligands.
From kinetic measurements, it was further found that the reaction differs in rate determining
step depending on the catalyst used. For the reaction catalyzed by the hydroxamic acid-
derived complex, the formation of the metal hydride is rate limiting, whereas reduction of the
substrate is rate limiting in the reaction catalyzed by the thioamide-derived complex. Rate
constants were also determined for the different steps.
High ee S High ee R
References:
[1] Ahlford, K.; Zaitsev, A. B.; Ekström, J.; Adolfsson, H., Synlett, 16, 2541-2544 (2007).
[2] Zaitsev, A. B.; Adolfsson, H., Org. Lett., 8, 5129-5132 (2006).
83
P-4
Nanna Ahlsten, Eduardo Busto, Michaela Vallin, Belén Martín-Matute,* and Jan-E.Bäckvall*
Department of Organic Chemistry, Arrhenius Laboratory, Stockholm University, 106 91 Stockholm, Sweden
nanna@organ.su.se
References
1. M. Edin, B. Martín-Matute, J.-E. Bäckvall, Tetrahedron: Asymmetry 2006, 17, 708.
2. N. Ahlsten, E. Busto, M. Vallin, B. Martín-Matute, J.-E. Bäckvall, unpublished results.
84
P-5
Catalytic hydrogenation and dehydrogenation reactions play a major role in industrial as well
as in academic research. Non-classical metal hydride complexes are catalytically active in
various reactions because they contain a labile dihydrogen ligand and a reactive hydride[1].
They can be seen as intermediates in hydrogenation and dehydrogenation reactions and are
therefore considered as potential hydrogen-transfer catalysts.
Metal-catalyzed hydrogen-transfer reductions of unsaturated organic substrates are mild
methodologies for the reduction of unsaturated compounds and are of practical importance[2].
Investigations on the application of non-classical Ruthenium hydrides in catalytic transfer
hydrogenation reactions are rare[3], opening an interesting potential for research in this area.
85
P-6
In the last decades there has been an increased number of syntheses of enantiomerically pure
compounds based on enzymatic processes as alternative to conventional chemical methods.[1]
Biocatalysis turned out to be useful, e.g., for the preparation of enantiomerically pure
pharmaceutically relevant compounds. A popular approach towards those type of molecules is
by means of dynamic kinetic resolution.[2] The aim of our current work is the development of
a dynamic kinetic resolution process (starting from racemic esters) for the preparation of
enantiomerically pure 2-phenyl-propionic acids such as (S)-naproxen, (S)-ibuprofen and
related molecules.[3] The synthetic concept is based on a combination of an enantioselective
enzymatic ester hydrolysis with a coupled base-catalyzed in situ racemisation (Scheme 1).
We investigated the activity of different lipases with respect to their hydrolytic activity. In
this screening a lipase has been identified which hydrolyzed racemic 2-phenylpropionates
rac-1 achieving enantioselectivity values of E=8-9. The reaction proceeded under room
temperature in an organic-aqueous two-phase solvent system consisting of water and MTBE.
In addition, different bases as catalysts were tested for the racemization of substrate (S)-1.
Notably, the use of the achiral base TBD resulted in a complete racemization after ten hours.
enantioselective
OR enzymatic hydrolysis OH
O O
(S)-1 (S)-2
rac-substrate base-catalyzed
in situ racemization
(R= Et, Pr, Bu)
OR OH
O O
(R)-1 (R)-2
[1] K. Drauz, H. Waldmann (eds.): Enzymes in Organic Synthesis, vol. 1-3, Wiley-VCH, Wiley-VCH, 2002.
[2] O. Pamies, J.-E. Bäckvall, Chem. Rev. 2003, 103, 3247-3261.
[3] For enzymatic syntheses of (S)-naproxen and related molecules with lipases, see: a) T. Bando, Y. Namba, K.
Shishido Tetrahedron: Asymmetry 1997, 8, 2159-2165, b) C.-S. Chang, S.-W. Tsai, C.-N. Lin, Tetrahedron:
Asymmetry 1998, 9, 2799-2807; c) H.-Y. Lin, S.-W. Tsai, J. Mol. Catal. B: Enzym. 2003, 24, 111-120.
86
P-7
HO(CH2CH2O)2H + C2H4O ⎯ ⎯→
k3
HO(CH2CH2O)3H
References
1. Kirk, R.E.; Othmer, D.F., Encyclopaedia of Chemical Technology; J. Wiley: New York, 1984.
2. Weissermel, K.; Arpe, H.J., Industrial Organic Chemistry; VCH: New York, 1993.
3. Othmer, D.F.; Thakar, M. S., Ind. Eng. Chem., Vol. 50, No.9, 1958.
87
P-8
N N
Mes Mes
Cl Cl Cl
Cl
Ru Ru Ru Ru
Cl Cl P Cl
Cl
O R
3 R=H
1 2 4 R = SO2NMe2
In RCM of diethyl diallylmalonate, catalysts 3 and 4 exhibited high activity and after
separation from reaction mixture they were reused several times without significant loss in
activity. In ROMP of norbornene, catalysts 1 – 4 delivered high molecular weight polymers in
high yields. Filtration test proved that the catalytic activity is bound to the solid phase.
Polymers with reduced amount of catalyst residues were obtained.
88
P-9
The search for the most atom-economical ways to form highly complex products is a matter
of increasing importance among industrial and academic research groups. One way to fulfil
this goal is to develop new tandem processes.
We envisioned that it is possible to combine the transformation of allylic alcohols into
ketones with selective C-H activation process, and both processes could be catalyzed by the
same ruthenium complex (Figure 1).[1] A number of Ru complexes, phosphine ligands and
additives have been evaluated in order to establish optimal conditions. It was found that a
stable ruthenium catalyst precursor - Ru(PPh3)3Cl2, together with PtBu3 and HCOONa secure
efficient tandem transformation. Using the developed procedure, variety of ortho alkylated
ketones have been obtained in excellent yields and short reaction times. Moreover, also
homoallylic alcohols can be employed as starting materials.
The necessity of hydride donor (HCOONa) presence and the possibility of double bond
migration over more than two bonds, suggest involvement of Ru hydrides in the isomerization
mechanism. Indeed, mechanistic investigations, including reactions with deuterium labelled
substrates, supported such mechanistic pathway.
O
H [Ru]
C-H activation H
C-C bond
isomerization f ormation
R
O
OH
[Ru]
References
[1] Bartoszewicz, A.; Martín-Matute, B. Org. Lett. 2009, 11, 1749–1752.
89
P-10
The growing interest in indole structures during the last 100 years results from the presence of
this nucleus as a substructure in many bioactive natural compounds. This stimulated the
research to obtain this indole moiety that resulted today in several useful syntheses. 1-3
Among them, the Pd-catalysed annulation of 2-iodoanilines with disubstituted alkynes, knows
as the Larock heteroannulation,4 is probably the most efficient procedure to achieved in a
single step the synthesis of 2,3-disubstituted indoles.
R2 R2
Pd catalyst
R + R R1
N
NH2 H
R1
However, the drawbacks of this methodology results from the exclusive use of homogeneous
catalysts made from soluble metal precursors and the use of ligands and salts. This is linked
with difficulty of separation and non-recyclability of the costly catalytic system. In addition,
this can led to relatively high Pd contamination of the final product that is non-compatible in
health applications.
For these reasons and for economic and environmental considerations, we developed the first
ligand and salt free heterogeneous Larock synthesis.
Different commercially available or homemade catalysts (Pd/NaY, Pd/SBA-15) were
evaluated after simplifying the conditions in homogeneous phase.
Generally good to excellent yields were achieved.
All results will be presented and discussed in details giving clearly the scopes and limitations
of this new procedure.
90
P-11
In recent years, the interest in catalysis promoted by metal nanoparticles (NP) is increasing.
Ionic liquids are a unique reaction media and are often reported as electrosteric stabilizers for
nanosized catalysts1. Ionic liquids can form a charged double layer around the NPs with the
anion closer to the particle surface and the effect of various anions on the growth of gold and
copper particles has been reported2. Our poster
reports the formation and growth of ruthenium
nanoparticles in various imidazolium based ionic
liquids.
The anions of the ionic liquids have a strong influence on formation of particles. In some
ionic liquids, e.g. [EMIM][OAc], the formation of nanoparticles is completely suppressed and
no NPs are found.
References
[1] a) D. Astruc, F. Lu and J.R. Aranzaes, Angewandte Chemie International Edition, 2005, 44, 7852-7872;
b) J. Kraemer, E. Redel, R. Thomann and C. Janiak, Organometallics, 2008, 27, 1976-1978; c) G. Viau
et al., Chem. Mater., 2003, 15, 486-494; d) E.T. Silveira et al., Chemistry - A European Journal, 2004,
10, 3734-3740.
[2] a) L. Ren, L. Meng, Q. Lu, Z. Fei, P.J. Dyson, Journal of Colloid and Interface Science, 2008, 323,
260-266; b) A. Filankembo, S. Giorgio, I. Lisiecki, M.P. Pileni, Journal of Physical Chemistry B, 2003,
107, 7492-7500.
91
P-12
Although monodentate chiral ligands (P-stereogenic), were the first class of ligands used in
asymmetric homogeneous catalysis, they have since been replaced by rigid bidentate ligands.
However, there are a number of asymmetric transformations which would require only a
monodentate and monoligated ligand to the transition metal (TM) catalyzed to achieve useful
activities (e.g. Pd- and Pt- catalyzed hydrosilylation, Au and Ag catalysis). This area of
catalysis has been neglected in part due to the difficulty of crafting an effective chiral
environment around a TM with a monodentate and monoligated ligand. 1
Inspired by recent reports of high asymmetric induction using bulky monodentate ligands
in Ir-catalyzed hydrogenation 2 we set out to investigate the potential of creating bulky chiral
ligands through supramolecular metal ligands interactions (Py-[Zn]). 3 The extra bulk of the
ligand created by the supramolecular interaction will only enable monoligation to the metal
center.
Concept: Targeted ligands:
Zn Zn
Zn N N
Chiral O O
monodentate
backbone
M P NMe2
O [Rh]
P NMe2
O [Rh]
Zn N N
Zn Zn
1
F. Lagasse, H. B. Kagan, Chem. Pharm. Bull. 2000, 48, 315.
2
a) F. Giacomina, A. Meetsma, L. Panella, L. Lefort, A. H. M. de Vries, J. G. de Vries, Angew. Chem. Int. Ed. 2007, 46, 1497. b) Giulia
Erre, K. Junge, S. Enthaler, D. Addis, D. Michalik, A. Spannenberg, M. Beller, Chem. Asian J. 2008, 3, 887.
3
A. W. Kleij, J. N. H. Reek, Chem. Eur. J. 2006, 12, 4219
92
P-13
A new family of chiral lanthanides complexes have been developed in our laboratory.
Lanthanide iodo binaphtolates are very efficient enantioselective Lewis acid type catalysts for
iminoaldolisation and aza-Michael reactions1, 2.
The synthesis of enantioenriched aminoalcohols is an highly important topic for chemists
since these molecules are widely employed as chiral auxiliaries, ligands or building blocks for
the design of sophisticated molecules. Different synthetic routes have been reported for their
preparation, yet new methods following green chemistry criteria are to be developed. We
report here that samarium iodo binaphtolate catalyzes, in mild conditions, enantioselective
ring opening of cyclic meso-epoxides by various aromatic amines producing β-amino alcohols
with high enantiomeric excesses up to 93%3. In order to study synthetic applications, we have
now extended these reactions to meso-epoxides including an heterocycle and new β-amino
alcohols have been isolated with enantiomeric excesses up to 70%4. This method follows
green chemistry criteria such as atom economy and/or catalytic reactions and the use of non
toxic lanthanides.
OH Cat.I =
10% cat. I, CH2Cl2, MS 4A
X O + ArNH2 X
18h. O
NHAr Sm I
O
X = CH2, CH2-CH2, CH=CH, O, N-R ee = 70 - 93 % (THF)
Non linear effects have been studied and an amplification was observed in the case of the ring
opening of 2,5-dihydrofuran oxide by p-anisidine.
1
. Jaber, N.; Carrée, F.; Fiaud, J.-C.; Collin J. Tetrahedron: Asymmetry 2003, 14, 2067.
2
. Reboule, I.; Gil, R. ; Collin, J. Tetrahedron: Asymmetry 2005, 16, 3881.
3. Carré, F. ; Gil, R. ; Collin, J. Org. Lett., 2005, 7, 1023.
4. Martin, M.; Bezzenine-Lafollée, S.; Gil, R.; Collin J. Tetrahedron: Asymmetry 2007, 18, 2598.
93
P-14
94
P-15
In the course of the development of catalytic diboration of alkenes [1], the metal-mediated
1,4-addition reaction of diboron reagents to electron deficient olefins ranks as the most
convenient approach for the preparation of β-boryl carbonyl compounds [2], highlighting the
recent approaches towards the asymmetric version, [3].
Taking into account our recent experience in β-boration of α,β-unsaturated aldehydes [4] and
the potential palladium mediated tandem diboration of alkenes and alkynes followed by
Suzuki reactions [5], we became motivated to establish a general methodology for Pd
catalyzing β-boration of α,β-unsaturated compounds followed by a palladium arylation
pathway. Special emphasis has been devoted towards the asymmetric induction by chiral
ligands on the β-boration of the α,β-unsaturated substrates.
O O O
Mt B O Ar O
R1 R2
R1 * R2 R1 * R2
O O ArX
B B Additive
O O
[1] a) I. Beletskaya, C. Morgen, Chem. Rev., 2006, 106, 2320. b) T. Ishiyama, N. Miyaura, Chem. Rec., 2004, 3, 271.
c) T. B. Marder, N. C. Norman, Top. Catal. 1998, 5, 62.
[2] a) T. B. Marder, Organomet. Chem. 2008, 34, 46; b) V. Lillo, A. Bonet, E. Fernández Dalton Trans. 2009,
2899.
[3] a) S. Mun, J.-E Lee, J. Yun, Org. Lett., 2006, 8, 4887; b) J.-E Lee, J. Yun, Angew. Chem. Int. Ed.., 2007, 47,
145; c) V. Lillo, A. Prieto, A. Bonet, M.M. Diaz-Requejo, J.Ramírez, P.J. Pérez, E. Fernández Organomet. 2009,
28, 659
[4] a) A. Bonet, V. Lillo, J. Ramírez, M. M. Díaz-Requejo, E. Fernandez Org. Biomol. Chem. 2009, 7, 1533.
[5] D. Penno, V. Lillo, I. O. Koshevoy, M. Sanáu, M. A. Ubeda, P. Lahuerta, E. Fernández Chem. Eur. J., 2008,
14, 10648.
95
P-16
Silvia Bordiga1, Sachin Chavan1, Elena Groppo1, Francesca Bonino1, Carlo Lamberti1,
Cherif Larabi2, Elsje Alessandra Quadrelli 2
Karl Petter Lillerud3, Merete h. Nilsen3 and Søren Jakobsen3
1
Department of Chemistry IFM, NIS Centre of Excellence, Centro di Riferimento, University of Torino, Via
Giuria 7, I-10125 Torino Italy.
2
Laboratoire de Chimie Organométallique de Surface, Université de Lyon, UMR5265 “LC2P2”, CNRS UCBL1
CPE, 43 Boulevard du 11 Novembre 1918, BP2077, F-69616 Villeurbanne Cedex, France,
3
Department of Chemistry, University of Oslo, P.O. Box 1033, N-0315 Oslo, Norway,
Metal Organic Frameworks (MOFs) provided a break-through in the area of porous materials,
with their potentially unlimited pore sizes and surface areas. However, MOFs have one major
dis-advantage in respect to other porous crystals (such as zeolites): their weak stability. New
MOFs appear at a high pace, but the appearances of new stable inorganic building bricks are
rare. Here we present a new zirconium based building brick that allows the
synthesis of high surface area MOFs with high stability, allowing further
functionalization [1–3]. UiO-66 has been used as starting point to obtain
new materials encapsulating a large variety of species that can attract
interest in catalysis and in photocatalysis. The first new
material has been obtained incorporating an amine
group into the structure by the use of 2-
aminoterephthalic acid during synthesis, thereby getting the MOF UiO-66-
NH2 with the same morphology as UiO-66.
Another possibility exploits the use of a volatile organometallic complex to
functionalize the benzene ring. In this way, starting from Cr(CO)6, Bz-Cr(CO)3 has been
obtained. In this case it has been
observed the possibility to
photoactivate the system and
N2
exchange one of the CO ligand with
nitrogen. This observation could
open new perspective to combine hν
photocatalysis and MOFs.
A third way explored was to consider the possibility to use isolated hydroxyls to anchor new
species. In fact it has been shown that it is possible to eliminate all the
encapsulated solvent molecules but keeping, for each inorganic unit, four
isolated hydroxyls groups that can graph species interesting as catalytic centers,
such as metal nano-particles and-or oxidic entrapped nanoclusters .
The work has been developed within IDECAT NoE.
1) Eddaoudi, M. ; Moler, D. B. ; Li, H. ; Chen, B. ; Reineke, T. M. ; O'Keeffe M. ; Yaghi, O. M., Acc. Chem.
Res., 2001, 34, 319; 32, 276; Férey, G.; Mellot-Draznieks, C. ; Serre, C. ; Millange, F., Acc. Chem. Res., 2005,
38, 217. 2) Cavka, J, H.:Jakobsen, S. ; Olsbye, U. ; Guillou, N. ; Lamberti, C. ; Bordiga, S. ; Lillerud, K. L., J.
Am. Chem. Soc., 2008, 130, 13850. 3) Arstad, B ; Fjellvåg, H ; Konghaug, K. O. ;; Swang, O.; Blom, R. ;
Adsorption, 2008, 14, 755-762, Gascon, J ; Aktay, U ; Hernandez-Alonso, M. D. ; van Klink, G. P. M. ;
Kapteijn, F ; J. Catal., 2009, 261, 75-87
96
P-17
Bouzid BOUDJRIBA
97
P-18
Iminophosphanamides can function as useful anionic spectator ligands in late transition metal
chemistry and catalysis. Various copper(I) carbene complexes bearing the deprotonated
electron-rich, sterically demanding 1 could be isolated and allowed a comprehensive study of
their electronic structures, geometries and reactivity.[i] Recently, COLLINS et al. have reported
on an alkyl nickel iminophosphonamide complex, presumably the active catalyst in ethylene
polymerization.[ii]
We present novel nickel and iron complexes based on iminophosphanamide 1. The anionic
ligand can be generated by in situ deprotonation of 1 with KH or n-BuLi. In the presence of
metal precursors FeBr2 and NiBr2 the monomeric iron(III) complex 3 and the dinuclear,
halide-bridged nickel(II) complex 2 are obtained. Both are paramagnetic species showing
tetrahedral metal configurations in the solid state (X-ray).[iii]
Compounds 2 and 3 can serve as convenient starting materials for inter alia the corresponding
η3-allyl and η3-benzyl complexes 4 (X-ray) and 5. Due to their low toxicity and low prices
such iron and nickel complexes and their congeners should open interesting perspectives for
the polymerization and/or copolymerization of olefins. Increasing attention is also being paid
to their general performance and applicability in other catalytic reactions. Synthetic,
structural, quantum chemical, and catalytic studies are under way.
[i] a) B. F. Straub, P. Hofmann, Angew. Chem. 2001, 113, 1328; Angew. Chem., Int. Ed. 2001, 40, 1288. b) I. V. Shishkov, F.
Rominger, P. Hofmann, Organometallics 2009, 28, 1049. c) P. Hofmann, I. V. Shishkov, F. Rominger, Inorg. Chem.,
2008, 47, 11755.
[ii] a) R. L. Stapleton, J. Chai, N. J. Taylor, S. Collins, Organometallics 2006, 25, 2514. b) S. Collins, T. Ziegler,
Organometallics 2007, 26, 6612.
[iii] The synthesis of 2 has been described earlier: R. Boese, M. Düppmann, W. Kuchen, W. Peters, Z. Anorg. Allg. Chem.
1998, 624, 837.
98
P-19
1
Bøgevig, A; Pastor, I; Adolfsson, H; Chem. Eur. J., 2004, 10, 294
2
Wettergren, J; Buitrago, E; Ryberg, P; Adolfsson, H Chem. Eur. J., 2009,15, Early View
99
P-20
Patrick S. Bäuerleina,b, John M. Slatterya, Ian J.S. Fairlamba, Adam F. Leea, Robert Thatchera,
Christian Müllerb, Dieter Vogtb and Adrian Whitwooda
a) Department of Chemistry, University of York, Heslington, York, YO10 5DD, UK; Tel. (IJSF): +44 1904
434091; Tel. (JMS): +44 1904 432610; E-mail: ijsf1@york.ac.uk and js633@york.ac.uk
b) Eindhoven University of Technology, Schuit Institute of Catalysis, Laboratory of Homogeneous Catalysis,
Den Dolech 2, 5600 MB Eindhoven, NL; Tel.:+31 40 247 2483 ; E-mail:d.vogt@tue.nl
Palladium catalysed cross-coupling reactions (scheme 1) are powerful tools for forming
carbon-carbon bonds in target orientated synthesis.[1,2] These reactions are normally carried
out in standard solvents such as methanol or THF. Moreover, tuneable alkene-ligands are
frequently used to stabilise the palladium nanoparticles. However, a major drawback of these
systems is the product purification, as product and ligand separation is delicate due to similar
polarities. This problem has been highlighted by Denmark et al. in an elegant and
comprehensive study for various alkene ligands.[3]
O
Si(OEt)3
To address this key problem we focused on the immobilisation of the catalyst in the reaction
medium, an ionic liquid (IL), with subsequent extraction of the product under biphasic
IL/solvent conditions. This procedure has already been proven useful e.g. in
hydroaminomethylation reactions carried out in ILs.[4]
We have synthesised ligands that differ completely in their solubility from commonly used
alkene ligands.[5] We achieved this by introducing cationic groups to a range of chalcone
ligands rendering them insoluble in apolar solvents but soluble in ILs. In this way it is
possible to extract the pure product from an IL reaction system without removing the ligand.
Furthermore, this new class of ligands is interesting in terms of their special electronic
properties, which might have an impact on the catalytic activity of the Pd-species.
Additionally the interaction with the counter ion might have a pronounced effect on the
reaction on changing from a strongly coordinating anion to a weakly coordinating anion.
We report here on the preparation of novel Pd-alkene catalysts and their application in cross-
coupling reactions. Results show that eficient extraction of the product from the reaction
mixture is possible without extracting the ligand of the Pd-complexes.
[1] Fairlamb, I.J.S.; Kapdi, A.R.; Lee, A.F., Org. Lett., 24, (2004), 4435.
[2] Fairlamb, I.J.S.; Kapdi, A.R.; Lee. A.F.; McGlacken, G.P.; Weissburger, F.; de Vries, A.H.M.; Schmieder
van-de Vondervoort, L., Chem. Eur. J., 12, (2006), 8750.
[3] Denmark, S.E.; Werner, N.S., J. Am. Chem. Soc., 130, (2008), 16382.
[4] Hamers, B.; Bäuerlein, P.S.; Müller, C.; Vogt, D., Adv. Synth. Catal., 350, (2008), 332.
[5] Bäuerlein, P.S.; Fairlamb, I.J.S.; Lee, A.F.; Müller, C.; Slattery, J.M.; Thatcher, R.; Vogt, D.; Whitwood,
A., Chem. Commun., submitted.
100
P-21
Juan M. Campeloa*, Felipa M. Bautistaa, Verónica Caballeroa, Diego Lunaa, Rafael Luquea,
Jose M. Marinasa, Antonio A. Romeroa, Jose M. Hidalgob, Anastacia Macarioc, Girolamo
Giordanoc
a
Departamento de Química Orgánica, Universidad de Córdoba, Campus de Rabanales, Edificio. Marie Curie,
E-14014 Córdoba, Spain.
b
Seneca Green Catalyst, S.L. Campus de Rabanales, 14014-Córdoba, Spain.
c
Dip. Ing. Chim. & Mat., Università della Calabria, I-870366 Rende (CS), Italy.
*Fax: (+34)957212066, E-mail: qo1capej@uco.es
This study shows a methodology that allows the use of any inorganic solid to support ruthenium
complexes, where the complex is anchored to the support through a phosphamide bond that is
comparatively much more stable than the conventional organosilane link described to obtain
immobilised complexes on inorganic supports. Our protocol provides many advantages compared to
any reported methodologies including minimum (or no) interaction with solvents or reagents under our
employed conditions. This novel methodology has been developed to achieve an hybrid organic-
inorganic bond for the covalent immobilization of the ruthenium complexes:
[RuII(bpea){(S)(-)(BINAP)}Cl](BF4) and [RuII(bpea)(DPPE)Cl](BF4) where bpea=N,N-bis-(2-
pyridylmethyl)ethylamine, BINAP= 2,2’-bis(diphenylphosphino)-1,1’-binaphthyl and
DPPE= 1,2-diphenylphosphineethane, [1-3]. Both has been covalently grafted on AlPO4-Sepiolite
(Figure 1) and tested in the liquid phase enantioselective hydrogenation of several substrates
exhibiting very good activities and excellent reusabilities.
References
[1] D. Luna, F.M. Bautista, A. Garcia, J.M. Campelo, J.M. Marinas, A.A. Romero, A. Llobet, I. Romero, I.
Serrano, PCT WO 2004/096442, 2004.
[2] F.M. Bautista, V. Caballero, J.M. Campelo, D. Luna, J.M. Marinas, A.A. Romero, I. Romero, I. Serrano, A.
Llobet, Top. Catal. 2006, 40, 193-205.
[3] I. Serrano, M. Rodriguez, I. Romero, A. Llobet, T. Parella, J.M. Campelo, D. Luna, J.M. Marinas, and J.
Benet-Buchholz, Inorg. Chem. 45 (2006) 2644.
101
P-22
Betiana C. Campo, Bright T. Kusema, Andrey Simakov and Dmitry Yu. Murzin*
Laboratory of Industrial Chemistry and Reaction Engineering, Process Chemistry Centre, Åbo Akademi,
Biskopsgatan 8, FI-20500 Åbo/Turku, Finland
Gold as a catalytic metal was widely studied during the last 25 years. Its application in
different reactions has demonstrated that it is active when finely dispersed over different
supports. One of these cases is the oxidation of sugars, where Pd is the catalyst most
commonly applied due to its activity. However the main disadvantage of palladium is the
deactivation due to the overoxidation of the surface under reaction conditions. On the
contrary, gold catalysts are quite stable. The origin of this stability could be the surface state
of the catalysts. Thus XPS was applied to the characterization of fresh and spent Au/CeO2
catalysts. The data included in this contribution are preliminar results of our study.
Catalysts were submitted to different treatments: (a) reduction in formaldehyde (room
temperature, 24 h) (b), reduction under hydrogen flow (300°C/3h) and (c) calcination in
oxygen (300°C/3h). The samples were evaluated in arabinose oxidation at 60°C and pH 8.
The spectra of the fresh catalysts allowed to confirm the presence of particles smaller than 2
nm, evidenced by a contribution placed at binding energy lower than the one correspondent to
metallic gold. This fact is also a consequence of the metal-support interactions. The presence
of Auδ+ implies the stabilization of gold
0.1 particles on the surface defects, mainly oxygen
vacancies [1]. The catalysts submitted to
0.08 treatment (b) exhibits a small percentage of
Au3+(See Table 1).
C (mol/l)
0.06
Regarding the arabinonic acid concentration,
0.04 (a) Formaldehyde
the catalysts treated in hydrogen and oxygen
presented similar behaviour. On the other
0.02 (b) Hydrogen
hand, the one treated in formaldehyde
(c) Oxygen presented lower values. The explanation of
0
this fact could be the state of gold surface. To
0 50 100 150 200 250
Time (min) obtain the highest conversion of arabinose to
arabinonic acid in the shortest reaction time
Figure 1: Concentration of arabinonic acid during
substantial amount of gold should be present
arabinose oxidation (60°C, pH 8).
as Auδ+.
Table 1: Atomic percentages of different gold species determinated by XPS:
Treatment (a) (b) (c)
δ+ δ- δ+ δ- δ+
Auδ-
0 0
Specie Au Au Au Au Au Au Au Au0
Fresh 8.2* 88.5 3.3 51.6 45.4 3.0 43.2 48.4 8.4
Spent 47.8 27.9 24.3 42.1 31.7 26.2 47.7 32.1 20.2
3+
* The Binding Energy of this contribution corresponds to Au .
References
[1] Q. Fu, H. Saltsburg, M. Flytzani-Stephanopoulos, Science 301 (2003) 935
102
P-23
Mauro Carraro, Martino Gardan, Andrea Sartorel, Gianfranco Scorrano, Marcella Bonchio
Department of Chemical Sciences - University of Padova and ITM-CNR - section of Padova
Via Marzolo, 1, 35131 Padova, Italy. E-mail: mauro.carraro@unipd.it
RfN
RfN44W
W1010/Hyflon
/Hyflon
OOH OH O
Figure 1. SEM-BSE and AFM images of Hyflon embedding RfN4W10, used for ethylbenzene photooxidation,
highlighting the occurrence of catalytic pores.
The resulting catalytic system has been used under irradiation in a continuous flow Catalytic
Membrane Reactor (CMR), to obtain the radical photooxygenation of ethylbenzene (Figure
1), in neat conditions, with Turnover Numbers (TON) higher than 1000. Reactivity data,
including a comparison between homogeneous and heterogeneous catalysis, provide an
evidence of the substrate transformation whitin the catalytic membrane microchannels.
Finally, the efficient epoxidation of 1-alkenes with hydrogen peroxide, in the presence of
fluorous-tagged polyoxotungstates, will also be presented.
1
Carraro, M.; Sandei, L.; Sartorel, A.; Scorrano, G.; Bonchio, M. Org.Lett. 2006, 8, 3671
2
S. P. de Visser, J. Kaneti, R. Neumann and S. Shaik, J. Org. Chem. 2003, 68, 2903.
3
a) J.P. Bégué, D. Bonnet-Delpon, B. Crousse Synlett, 2004, 18; b) A. Berkessel, J. A. Adrio Adv. Synth. Catal.
2004, 346, 275.
4
M. Carraro, M. Gardan, G. Scorrano, E. Drioli, E. Fontananova, M. Bonchio, Chem. Commun., 2006, 43, 4533
103
P-24
iPr
iPr iPr
iPr iPr
N N iPr
Ni N N
iPr iPr N N Ni
Ns iPr iPr
Ns Ni
+ iPr iPr Ns BF3
OH Ns O O
BF3
Si Si Si
O O O
O O O
O TMS O O
A well-defined nickel-allyl silica supported complex was similarly prepared from the bis
methallyl complex, Ni[η3-CH2C(CH3)CH2]2. The grafting reactions were followed by IR and
GC and the resulting surface complexes were characterized by chemical analysis, 1H and 13C
solid-state NMR and EXAFS. These well-defined surface species have then been activated by
gaseous BF3 in order to obtain cationic Ni(II) catalysts, active for gas phase ethylene or 1,3
butadiene polymerisations. Solvent-free polymerizations of ethylene or 1,3 butadiene with
these catalysts and other supported nickel complexes have been studied under different
conditions. The performances of these supported catalysts is discussed and compared to those
of molecular complexes used in homogeneous catalysis processes
(1) Ittel, S. D.; Johnson, L. K.; Brookhart, M., Chem. Rev. 2000, 100, 1169-1203.
(2) Tobisch, S.; Taube, R. Organometallics, 1999, 18, 5204-5218.
(3) O’Connor, A. R.; White, P. S.; Brookhart, M. J. Am. Chem. Soc. 2007, 129, 4142-4143.
(4) Dorcier, A.; Merle, N.; Taoufik, M.; Bayard, F.; Lucas, C.; De Mallmann, A.; Basset, J. M.
Organometallics, 2009, 28, 2173-2178.
104
P-25
The significance of allenes as building blocks in organic synthesis has dramatically increased
over the past decade, leading to a rising demand in efficient methods for the preparation of
optically pure derivatives of this class of axially chiral compounds. Therefore a novel, highly
enantioselective, biocatalytic process for the kinetic resolution of primary allenic alcohols
using Porcine pancreatic lipase has been developed. Combining biocatalysis with a
Palladium(II)-catalyzed racemization of the chirality axis in order to overcome the yield
limitation of classical kinetic resolutions, progress towards a chemoenzymatic dynamic
kinetic resolution could be made. Furthermore, the synthetic value of the optically active
allenols derived from this resolution procedure is highlighted in the concise enantioselective
total synthesis of the fungal metabolite (–)-striatisporolide A.
Porcine O
pancreatic
OH lipase OH + O
vinyl butyrate
iPr2O, rt
41% yield, 97% ee 58% yield, 70% ee
HOOC
O O
(-)-striatisporolide A
105
P-26
The use of nanostructured materials in catalysis is nowadays a well established concept. The
understanding of the microscopic mechanisms giving rise to the catalytic properties is
however complicated by the intrinsic complexity of the system. A promising path to give
further information on these phenomena is the study of model samples in which each
determinant parameter can be controlled and varied independently. One class of
heterogeneous catalyst that has attracted great attention in the last decade is constituted by
metallic nanoparticles deposited on an oxide surface [1,2].
A new experimental set-up for the study of heterogeneous catalysis by cluster-based materials
has been developed and is currently under testing. Cluster ions, pruduced in a magnetron
sputtering source, are characterized by Time of Flight mass spectrometry and further directed
to the deposition chamber. Here they can be mass selected and deposited onto a customized
substrate or matrix. The substrate can be either commercial or deposited in situ; the gas
composition of the atmosphere, as well as the sample temperatur can be controlled.
After deposition the sample can be moved in vacuum to the analysis chamber, equipped with
microcalorimetry and temperature desorption spectroscopy tools, in order to perform in situ
experiments.
106
P-27
Asymmetric catalytic transfer hydrogenation (ATH) provides an attractive approach for the
preparation of chiral building blocks such as secondary alcohols for pharmaceuticals and
other biologically important substances. In terms of operational safety and simplicity, ATH
has some advantages over the reduction with molecular hydrogen. By the use of hydrogen
donors such as formates, secondary alcohols or the formic acid/triethylamine mixture, the risk
associated with the use of hydrogen at high pressure can be avoided.
Good progress concerning the activity and enantioselectivity of homogeneously soluble
transition metal complexes for use in ATH has been made in recent years. Water tolerant
systems have been developed and some attempts have been made to adress the problem of
reusability [1, 2]. Heterogenisation of catalytically active and highly stable complexes is one
strategy to provide both, recyclable catalyst systems and less metal contamination of the
products. Additionally, using water as solvent improves the environmental impact of the
overall process.
Here we report the anchoring of a modified rhodium catalyst on polymeric membranes and
particles as solid supports. The immobilised catalyst has been applied to the reduction of
phenyl ketones in the water/sodium formate system. Good conversion rates and enantiomeric
excesses up to 99 % have been achieved. The catalyst loaded supports could be reused several
times without significant decrease of activity and selectivity. Due to the high catalyst stability
to air, a simple recycling procedure was possible. The support was separated from the reaction
mixture, washed with methanol, dried under reduced pressure and anew introduced into a
flask.
Investigation regarding the conversion of different substrates and optimised reaction
parameters is still under progress.
107
P-28
[a] Leibniz-Institut für Katalyse e.V. an der Universität Rostock, Albert-Einstein-Straße 29a, 18059 Rostock
(Germany), Fax: (+49) 381-1281-5000.
The development of sustainable, more efficient and selective catalysis is a fundamental goal
in chemistry. During the last decades, manifold transition-metal catalyzed reactions have been
uncovered, which have significantly improved organic synthesis. Notably, most of the
applications are based on complexes of precious metals such as palladium, rhodium, iridium,
and ruthenium. The limited availability of these metals and their high price makes it highly
desirable to search for more economical and environmentally friendly alternatives. Among the
various bio-relevant metals especially iron is an attractive alternative, which offers significant
advantages compared with precious metals. Iron is cheap, benign, readily available, and
ecological friendly. Obviously, numerous iron salts and iron complexes are commercially
accessible on a large scale or easy to synthesize.
In order to achieve catalytic carbonylations based on iron, we started to investigate the
reaction of alkynes with carbon monoxide and different nucleophiles. Herein, we report the
first iron-catalyzed synthesis of succinimides by carbonylation of different terminal and
internal alkynes with ammonia or amines in good selectivity and high activity. This new
catalytic reaction is based on the double carbonylation of alkynes and intramolecular
nucleophilic attack.
O
R'
CO, NH3
NH
Fe-cat.
R' R''
O
O
R'' CO, H2NR''' R'
Fe-cat. NR'''
R'= H, alkyl, aryl
R''= alkyl, aryl R''
O
R'''= alkyl, aryl
108
P-29
N
N N N N N N
N N N N N N N N N N N N
O Ru O O Ru O O Ru O O Ru O O Ru O O Ru O
O O O O O O O O O O O O
N N N N N N
N
Br Me O N
Me Me Me
1 2 3 4 5 6
Figure 1. Molecular structures of complexes 1-6.
References
[1] R. Eisenberg, H. Gray, Inorg. Chem. 2008, 47, 1697.
[2] L. Sun, L. Hammarström, B. Åkermark, S. Styring, Chem. Soc. Rev. 2001, 30, 36.
[3] J. L. Cape, J. K. Hurst, J. Am. Chem. Soc. 2008, 130, 827.
[4] P. Comte, M. K. Nazeeruddin, F. P. Rotzinger, A. J. Frank, M. Grätzel, J. Mol. Catal. 1989, 52, 63.
[5] F. P. Rotzinger, S. Munavalli, P. Comte, J. K. Hurst, M. Graetzel, F. J. Pern, A. J. Frank, J. Am. Chem. Soc.
1987, 109, 6619.
[6] A. Harriman, G. Porter, P. Walters, J. Chem. Soc., Faraday Trans. 2 1981, 77, 2373.
109
P-30
The separation of catalysts from the solvent and reaction products remains one of the major
disadvantages of homogeneous catalytic reactions, which are otherwise advantageous because
of their high activity, tuneable selectivity and ease of study. In recent years a large number of
different strategies has been employed to address this problem, ranging from the use of
soluble and insoluble supports, sometimes with ultrafiltration, to the application of biphasic
systems.1, 2 Ideally, the reactions would be carried out in continuous flow mode with the
catalyst remaining in the reactor at all times, whilst the substrates and products flow over the
catalyst. A variety continuous flow reactions has been proposed,3 but in this presentation we
shall highlight the use of supported ionic liquid phase catalysts, over which the substrates a
flow dissolved in supercritical carbon dioxide (scCO2). The products are also removed by the
flowing scCO2 stream.4
The catalyst is supported within a thin film of an ionic liquid supported within the pores of a
microporous silica. This catalyst is then placed in a tubular flow reactor, similar to that used
for heterogeneous reactions. The use of pressurised CO2 as the transport medium offers
certain advantages, including:
• A wider substrate selection than is possible for all gas-phase reactions;
• Lower solubility of the ionic liquid and the catalyst in the flowing phase than when
using all liquid flow;
• Better transport of gases to the catalytic centres than for liquid flow
• Fast diffusion of all species to the catalytic centres
Potentially, these advantages allow for
high reaction rates, high rates of
transport of substrate over the catalyst
and low leaching of both the catalyst and scCO2
the ionic liquid.
CAT
We shall describe work on various Cat
IL
different reactions including metathesis
Cat
(see Figure 1), as well as discussing the IL
110
P-31
Carbon dioxide is an attractive, low-cost and readily available C1 building block for chemical
synthesis. Despite of its thermodynamic stability, many catalytic systems were reported for
utilization of CO2 in the production of industrially interesting compounds and materials. 1 In
our laboratories, we investigate the copolymerization between epoxides and CO2. Products of
this reaction are highly valuable polyethercarbonates, while cyclic carbonates are often
formed as side-products.
Figure 1
The purpose of this work is to establish intrinsic and operational parameters for the
copolymerization of carbon dioxide and epoxides. It requires a multidisciplinary approach and
a contribution from different disciplines. One of our primary interests is in the use of
combined theoretical and experimental techniques to understand the mechanism of
elementary reactions over the active center, and to determine how the particular topology of a
catalytic system is related to its function as a catalyst.
A promising approach to obtain highly active catalysts for the co-polymerization reaction of
epoxides with CO2 is the optimization of homogeneous catalysts, based on Co, Zn, Al and
Cr. 2 Many reports have already been published which indicate the great potential of this type
of reaction. The homogeneous system can be tuned easily to suppress the formation of cyclic
products and provides a better molecular understanding of the reaction. It is our objective to
attain a deeper understanding of the mechanistical pathway and in turn design a simple and
inexpensive homogeneous system which could deliver high activity and selectivity.
Fig. 2: Model for the active site of Co(III)-salen complex, which is known as
homogeneous catalyst for the epoxide/CO2 copolymerization,.
1
Beckman, E. J. Science 1999, 283, 946-947
2
Coates, G. W.; Moore, R. D. Angew. Chem. Int. Ed. 2004, 43, 6618-6639
111
P-32
Espinas J.1,2; Darbost U.2; Duchamp C.2; Bayard F.1; Thivolle-Cazat J.1; Basset J.-M.1;
Taoufik M. *1; Bonnamour, I. *2
1
UMR 5265, LCOMS, CNRS-CPE Lyon, Villeurbanne, F-69616, France
2
UMR 5246, ICBMS, Université Lyon 1, Villeurbanne, F-69622, France
In the last years many metal calixarenes complexes were synthesized, 1 but only in a few
cases they were used as soluble Ziegler Natta catalysts to promote the polymerization of α-
olefins. Ladipo and coworkers 2 first synthesized several titanium calixarenes complexes and
used them as catalysts, in the presence of methylalumoxane (MAO), to promote the
polymerization of ethylene. Recently, 1,3-dimethoxy-p-tBu-calix[4]arene titanium dichloride3
and 1,3-dipropoxy-calix[4]arene titanium dichloride4 were also reported for the same
application. The activity of these systems1 calix-MAO is very low 80 Kg/mol.h.
These compounds could be considered similar to the titanium bis-aryloxide. In fact the
calixarene ligands are coordinated to the metal by phenoxy oxygens on the positions 1 and 3
of the calixarene while the other two phenoxy oxygens are chemically protected.
Cl
Cl
Ti
XX
O O
Tuning the coordination sphere of titanium complexes via the preparation of various
calixarene ligands with different structural parameters in 1,2 and 1,3 positions can help to
increase the activity in ethylene polymerization.
In this work, we wish to present the syntheses and full characterization (1H, 13C, NOESY,
DEPT, HMBC NMR, elemental analysis and X-Ray structures) of various p-tBu-
calix[4]arene titanium dichloride complexes with different substituents in 1,2- and 1,3
positions in order to test them in the presence of MAO (Methylalumoxane), as catalysts for
ethylene polymerization, at different temperatures and pressures.
All the polymers obtained showed a high molecular weight and a narrow chain distribution
indicative of a single site catalyst. The results also reveal an important effect of the pπ-dπ
interactions between Titanium and oxygens of the calixarene on the stability of the active site
and the catalytic activity.
(1) Wieser, C.; Dieleman, C. B.; Matt, D. Coord. Chem. Rev. 1997, 165, 93-161.
(2) Ozerov, O. V.; Rath, N. P.; Ladipo, F. T. J. Organomet. Chem. 1999, 586, 223-233.
(3) Capacchione, C.; Neri, P.; Proto, A. Inorg. Chem. Commun. 2003, 6, 339-342.
(4) Frediani, M.; Semeril, D.; Comucci, A.; Bettucci, L.; Frediani, P.; Rosi, L.; Matt, D.; Toupet, L.;
Kaminsky, W. Macromol. Chem. Phys. 2007, 208, 938-945.
112
P-33
1
H, 13C, 31P and 103Rh NMR studies and DFT calculations in
homogenous hydrogenation of nitrogen-containing substrates:
Study of diphosphine rhodium complexes and catalytic cycle.
1
C. R. Landis, J. Halpern, J. Am. Chem. Soc., 1987, 109, 1746.
2
S. Felgus, C. R. Landis, J. Am. Chem. Soc., 2000, 122, 12714.
3
a) I.D. Griednev, T. Imamoto, Acc. Chem. Res., 2004, 37(9), 633-644; b) T. Imamoto, T. Itoh, K. Yoshida, I.D.
Griednev, Chem. Asian J., 2008, 3, 1636
4
A. Fabrello, A. Bachelier, M. Urrutigoïty, and P. Kalck, Coord. Chem. Rev., submitted.
5
W. Leitner, M. Buhl, R. Fornika, C. Six, W. Baumann, E. Dinjus, M. Kessler, C. Krüger, and A. Rufińska,
Organometallics 1999, 18, 1196-12060.
113
P-34
Palladium based pincer complexes belong to some of the most efficient Heck- and Suzuki-
catalysts and continuously attract attention because of their unique balance between stability
and reactivity.1 Although recent developments showed a considerable increase in activity of
cross-coupling catalysts, a typical protocol for these reactions still requires prolonged reaction
times and/or high catalyst loadings, referring to the need of more efficient systems. Since the
nature of the active form of pincer catalysts of palladium (Pd0 vs PdIV) in the Heck reaction
e.g. is still unclear in some of the applied systems,2 a catalyst was developed, which could
support both, palladium nanoparticle formation as well as the formation of PdIV intermediates.
We present the synthesis and catalytic activity of aminophosphine-based pincer complexes of
palladium with the general formula of [(C6H3-2,6-(XP(piperidinyl)2)2Pd(Cl)] (X = NH and O)
in various C-C cross-coupling reactions. Investigations to get mechanistic insights are
presented for each of the reaction.
NR2
X P NR2
Pd Cl
X P NR
2
NR2
R = piperidyl, X = NH or O
[1] (a) Ohff, M.; Ohff, A.; van der Boom, M. E.; Milstein, D. J. Am. Chem. Soc. 1997, 119, 11687. (b) Morales-
Morales, D.; Redon, R.; Yung, C.; Jensen, C. M. Chem. Commun. 2000, 1619.
[2] (a) Bedford, R. B., Chem. Commun. 2003, 1787. (b) Eberhard, Org. Lett., 2004, 2125.
114
P-35
Anne Galarneau, Paco Laveille, Lai Truong Phuoc, Jullien Drone, Gilbert Renard,
François Fajula
Institut Charles Gerhardt de Montpellier, UMR 5253 CNRS/UM2/ENSCM/UM1, ENSCM, 8 rue de l’Ecole
Normale, 34296 Montpellier Cedex 5, France.
e-mail: anne.galarneau@enscm.fr
References:
1- A. Galarneau, G. Renard, M. Mureseanu, A. Tourrette, C. Biolley, M. Choi, R. Ryoo, F. Di Renzo, F. Fajula,
Microporous Mesoporous Mater., 2007, 104 , 103.
2- A. Galarneau, L. Truong Phuoc, A. Falcimaigne, G. Renard, F. Fajula, Stud. Surf. Sci. Catal., 2007,165, 637.
3- M. Mureseanu, A. Galarneau, G. Renard, F. Fajula, Langmuir, 2005, 21, 4648.
4- A. Galarneau, M. Mureseanu, S. Atger, G. Renard, F. Fajula, New J. Chem., 2006, 30, 562.
115
P-36
Scheme 1
We report a simple route to various arylphosphinous acid-boranes and their use as precursors
to form enantiomerically pure tertiary phosphine-boranes (scheme 2).
O OH BH3 BH3
P H P R2 P H P R3 up to 99% ee
O R1 H3B R1 R1 R2 R1 R2
Scheme 2
1
a) Comprehensive Asymmetric Catalysis, ed. Jacobsen E. N., Pfaltz A. and Yamamoto H., Heidelberg, 1999; b)
Catalytic Asymmetric Catalysis, ed. Ojima I., Wiley-VCH, New York, 2nd ed., 2000.
2
Grabulosa A., Granell J. And Muller G. Coord. Chem. Rev., 2007, 251, 25-90.
3
Stankevic M. and Pietrusiewic K. M. J. Org. Chem., 2007, 72, 816-822
4
Uziel J., Stephan M., Kaloum E. B., Genêt J. P. And Jugé S. Bull. Soc. Chim. Fr., 1997, 134, 379-389; Nagata
K., Matsukawa S. and Imamoto T. J. Org. Chem., 2000, 65, 4185-4188
5
Leyris A., Bigeault J., Nuel D., Giordano L., Buono G. Tetrahedron Lett. 2007, 48, 5247-5250
6
Moraleda D., Gatineau D., Martin D., Giordano L., Buono G. Chem. Commun. 2008, 3031-3033
116
P-37
OH
O O
O Si O
N O N
SiO2 N
Zn
N + ZnEt2 O N
-C 2H 6 O
N O Si O
O O
SiO2
We probed the behavior of the molecular and supported zinc species in asymmetric
benzaldehyde silylcyanation.2 Remarkably, under optimized conditions, the heterogeneous
catalyst displays activity and selectivity superior to that its molecular counterpart: it affords
the silylated mandelonitrile with up to 66% enantiomeric excess, compared to 18% for the
homogeneous system. The ease of access to chiral supported zinc species makes this approach
a promising entry into efficient heterogeneous asymmetric catalysis.
1)
C. E. Song, S. Lee, Chem. Rev. 2002, 102, 3495.
2)
M. North, D. L. Usanov, C. Young, Chem. Rev. 2008, 108, 5146.
117
P-38
diameter of the dinuclear species larger than the dinuclear Ti-POSS-TSIPI R'
diameter of mesopores).
To test and verify the activity and accessibility of Ti(IV) sites in all Ti-containing materials
(Ti-POSS/SBA-15 and Ti-POSS/SiO2, Ti-POSS/nano-MCM-41), epoxidation reactions of
limonene and α-pinene with TBHP as oxidant were performed. The anchored materials were
compared to widely-studied titanium-containing heterogeneous catalysts obtained by grafting
a similar loading of Ti(Cp)2Cl2 onto mesoporous silica supports. Anchored Ti-POSS-derived
materials showed high activity in the epoxidation of limonene and α-pinene and the
heterogeneous character was confirmed. In terms of selectivity, the anchored catalysts display
different results with respect to those obtained by grafting Ti(Cp)2Cl2. This different catalytic
behaviour is due to the dissimilar chemical surrounding of the Ti(IV) sites in the anchored
and grafted materials.
1
K.Wada, T.Mitsudo, Catal. Surv. Asia 2005, 9, 229-241
2
F.Carniato, C.Bisio, E.Boccaleri, M.Guidotti, E.Gavrilova, L.Marchese, Chem. Eur. J. 2008, 14, 8098-8101
118
P-39
Amines represent an important class of compounds in chemistry and biology. Among all the
variety of amines, primary amines are the most useful, but their selective synthesis is
challenging due to their high reactivity. Transformation of carbonyl compounds via oximes is
one of several possible ways for the synthesis of primary amines. This reaction is known to be
very sensitive; chemical yield and selectivity strongly depend on substrate structure and on
the catalytic system.
In this work, the hydrogenation of aldoximes (2-butyraldoxime, nonanal aldoxime,
pivalaldoxime, cyclohexane aldoxime,) on different catalysts (Raney-Ni, Raney-Co, Ni-
Cr/SiO2, Ni/Al2O3, Pd/C, Rh/C, Ru-Re/C) was studied to establish optimum reaction
parameters.
Independently of the substrate the selectivity to the desired product strongly depended on the
catalyst used. The highest selectivity and activity were obtained for nickel catalysts (both
Raney-Ni and Ni-Cr/SiO2). Full conversion was achieved after 75 minutes and selectivity
towards primary amine was higher than 95%. The best results were obtained for 10 wt.%
catalyst for reaction temperature equal to 180°C. Under this conditions highest selectivity,
shortest initial period of reaction and shortest reaction time were obtained (Fig.1.a).
100
90 R
80 CH NH2
R C N
Concentration [%]
70 primary amine H
60 nitrile R
Schiff base C N OH
50 secondary amine
40 oxime H
30 R
RHC N CH2R CH NH
20
H 2
10
0
0 20 40 60 80 100 120 140
Time [min]
The aldoximes are not directly transformed into amines (Fig. 1.b). The primary products
identified during the reaction were nitrile and Schiff base. Reference reactions showed that
amine can be formed via Schiff base, nitrile or simultaneously from both intermediates. The
significance of the two parallel reaction pathways was derived by macrokinetic modelling of
the reaction sequence. Both reaction pathways had about the same significance. However the
nitrile reduction provides a higher selectivity to primary amine. We also checked that primary
amine can be transformed during reaction into secondary amines. However, this reaction is of
minor importance.
119
P-40
Carbonylated heterocycles like flavones, aurones or their nitrogen analogues like quinolones
or indoxyls are an important class of bioactive molecules. Several stoichiometric strategies
exist for their preparation, however for economical and environmental reasons we developed
a one-pot palladium catalyzed synthesis of such compounds. The formation of N-heterocycles
was achieved through a carbonylative Sonogashira coupling/cyclization sequence. Reaction
parameters were optimized in homogeneous phase aiming at a better understanding of the
reaction mechanism that will be fully discussed in this presentation. Thus 4-quinolone or
indoxyl derivatives were selectively obtained.
However the palladium contamination of the final products and the non-recyclability of the
catalyst are generally the drawbacks of homogenous catalysis. For that reason, we then
undertook the development of heterogeneous catalytic systems. Different Pd-complexes
grafted on mesoporous silica SBA-15 were prepared and evaluated. The results obtained so
far will be presented and compared to those achieved in homogeneous reactions in order to
demonstrate the benefits of using heterogeneous catalysis.
O
R'
O N R
H
I
R'
N R
H
indoxyl
120
P-41
Vasile Georgescu
Institute of Physical Chemistry “Ilie Murgulescu”, Romanian Academy, Spl. Independentei 202,
Bucharest, Romania, (e-mail: vgeorgescu@icf.ro)
Alcohol-based fuels have been important energy sources. Alcohols have been used as fuels in three
main ways: as a fuel for a combustion engine, as a fuel additive to achieve octane boosting effects
similar to the petroleum-based additives and metallic additives like tetraethyllead and as a fuel for
direct conversion of chemical energy into electrical energy in a fuel cell.
Butanol is a chemical that has excellent fuel characteristics. It contains approximately 22% oxygen,
which when used as a fuel extender will results in more complete fuel combustion. Use of butanol as a
fuel will contribute to clean air by reducing smog-creating compounds, harmful emissions (CO) and
unburned hydrocarbons in the tail pipe exhaust.
Butanol has research and motor octane numbers of 113 and 94, compared to 111-92 for ethanol. The
value of octane boosting is dependent of isomers content of butanol.
Li3Cr2(PO4)3 catalyst was prepared and studied.
Li3Cr2(PO4)3 catalyst possessed high catalytic activity and stability in the dehydration and
isomerization of butanol.
The catalyst was prepared by solid state synthesis. The highest activity in the transformations of
butanol was observed after treating the catalyst with plasma [1].
The plasma chemical technology for obtaining catalysts is based on the character of plasma action on
solids[2-4].
Catalytic experiments were performed at 100-5000C in a flow unit. The products were analyzed
chromatographically.
The activity of Li3Cr2(PO4)3 in butanol transformations was studied for four surface states: initial
sample and after plasma chemical treatment in oxygen, hydrogen and argon.
The modification of the surface of catalysts and their regeneration under the action of a plasma causes
the appearance of a new surface structures, which increase activity, selectivity and operation stability.
References
1.A.I.Pylina, I.I.Mikhalenko, A.K.Ivanov-Shits, T.V.Yagodovskaya and V.V.Lunin, Russian J. Phys. Chem. 80
(6) 882 (2006)
2.T. V. Yagodovskaya and V. V. Lunin, Zh. Fiz. Khim. 71(5), 775 (1997) [Russ. J. Phys. Chem. 71 (5),
681(1997)].
3. V. V. Lunin, E. A. Dadasheva, T. V. Yagodovskaya, andO. M. Knipovich, Abstracts of Papers, 2nd All-
UnionMeeting “Application of Plasma in the Technology ofCatalysts” (Kiev, 1991), p. 18.
4. A. L. Lapidus, I. G. Solomonik, A. Yu. Krylova, andE. G. Krashenninikov, Abstracts of Papers, IV
RussianConference with the Participation of CIS Countries“Scientific Fundamentals of the Preparation and
Technologyof Catalysts” (Ufa, 2000), p. 35.
121
P-42
______________
References:
1 M. Mitani, J. Mohri, Y. Yoshida, J. Saito, S. Ishii, K. Tsuru, S. Matsui, R. Furuyama, T. Nakano, H. Tanaka,
S. Kojoh, T. Matsugi, N. Kashiwa and T. Fujita J. Am. Chem. Soc. 2002, 124, 3327-3336
2. M. C. W. Chan, S. C. F. Kui, J. M. Cole, G. J. McIntyre, S. Matsui, N. Zhu and K. Tam, Chem. Eur. J. 2006,
12, 2607 – 2619
3. S. C. F. Kui, N. Zhu and M. C. W. Chan Angew. Chem. Int. Ed. 2003, 42, 1628 – 1632
122
P-43
Nowadays, nearly all chemical transformations involve catalytic processes. Catalysis plays a key role
in all conversions by making them faster, more selective and highly reproducible [1]. Homogeneous
catalysis has grown dramatically over the last years. In most laboratories homogeneous catalysis
research is conducted on a relatively large scale, often on a millilitre or much larger scale. Over the
past decade, interest in miniaturisation of chemical reactions has grown rapidly. Microflow reactors
have received significant interest in the stream of downsizing of chemistry and they are expected to
make an innovative change for chemical synthesis. Microflow systems for the study of homogeneous
catalysis are relatively rare, but the interest is rapidly growing. Both experimental studies and
calculations show there are several catalytic conversions that could benefit from conductance in
microflow reactor systems [2] by raising conversion and selectivity. In addition it may be
advantageous for other reasons such as a rapid screening of conditions, handling of dangerous
materials, high pressures or highly exothermic reactions [3].
The reduction of ketones using catalytic hydrogen transfer, with 2-propanol as hydrogen source, has
been widely investigated in the last years [4]. One of the most active systems described in the
literature is based on a ruthenium complex associated with a terdentate ligand (Figure 1), affording
TOF values up to 2.5 x 106 h-1 [5].
O OH
OH [Ru]/base O
+
+
PPh 2
[Ru] =
N Ru PPh2
Cl
NH 2
1
Scheme 1
Herein we present the application of the ruthenium complex (1) in the catalyzed transfer
hydrogenation of ketones using microreactors. The effect of the concentration of the reactants,
and flow rate has been studied.
[1]van Leeuwen, P. W. N. M. “Homogeneous Catalysis: Understanding the Art”, Kluwer (now Springer),
Dordrecht, 2004
[2]www.mikroglas.com
[3] Ehrfeld , W., Hessel, V., Löwe, H. “Microreactors: New Technology for Modern Chemistry”, Wiley-VCH,
Weinheim 2000
[4]Gladiali, S.; Alberico, E. Chem. Soc. Rev. (2006), 35, 226
[5] Baratta ,W.; Chelucci, G.; Gladiali, S.; Siega, K.; Toniutti, M.; Zanette, M., Zangrado, E.; Rigo, P. Angew.
Chem. Int. Ed. (2005), 44, 6214
123
P-44
Cyril Godard, Angelica Balanta Castillo, Serafino Gladiali, and Carmen Claver
Departament de Química Física I Inorgànica, Universitat Rovira I Virgili, C/ Marcel.li Domingo s/n 43007
Tarragona, Spain
Recently, the use of metal nanoparticles (NPs) as catalysts for organic substrate transformations has
generated great interest.[1] The properties of these nanocatalysts is mainly controlled by the size of the
nanoparticles and the nature of the stabilising agents, often sulphur donor ligands. Phosphorus donor
ligands, however, has received much less attention to stabilise NPs.[2]
The Suzuki-Miyaura cross-coupling reaction is one of the most versatile reaction and successful
synthetic tools for C-C bond formation in organic chemistry.[3] Despite the great interest of the achiral
reaction for the production of biaryl derivatives, very little attention has been paid to the asymmetric
variant of this process.[4] Recently, room temperature reaction with good yield and enantioselectivity
was achieved using diphosphine stabilised Pd NPs as catalysts.[5] The use of nanoparticles supported
on resin was also shown to be very effective in this reaction.[6]
Here we present the successful use of Pd-nanoparticles stabilised by chiral monophosphine ligands in
the asymmetric Suzuki coupling of binaphthyls with ee’s up to 93%.
[1] See for instance: a) D. Astruc, Nanoparticles and Catalysis, Wiley-VCH, Weinheim, 2008; b) A. Roucoux, J. Schulz, H.
Patin, Chem. Rev. 2002, 102, 3757; c) J. A. Widegren, R. G. Finke, J. Mol. Catal. A 2003, 198, 317; d) M. M. Manas, R.
Pleixats, Acc. Chem. Res. 2003, 36, 638.
[2] a) M. Tamura, H. Fujihara, J. Am. Chem. Soc. 2003, 125, 15742; b) Y. Yanagimoto, Y. Negishi, H. Fujihara, T. Tsukuda,
J. Phys. Chem. B 2006, 110, 11611; c) S. U. Son, Y. Jang, K. Y. Yoon, E. Kang, T. Hyeon, Nano Lett. 2004, 4, 1147.
[3] For recent reviews, see: G. Bringmann, A. J. P. Mortimer, P. A. Keller; M. J. Gresser, J. Garner, M. Breuning, Angew.
Chem. Int. Ed. 2005, 44, 5384.
[4] a) A. N. Cammidge, K. V. L. Crepy, Chem. Commun. 2000, 1723; b) J. Yin, S. L. Buchwald, J. Am. Chem. Soc. 2000,
122, 12051; c) A.-S. Castanet, F. Colobert, P.-E. Broutin, M. Obringer, Tetrahedron: Asymmetry 2002, 13, 659; d) J. F.
Jensen, M. Johannsen, Org. Lett. 2003, 5, 3025; e) A. Herrbach, A. Marinetti, O. Baudoin, D. Guenard, F. Gueritte, J. Org.
Chem. 2003, 68, 4897; f) A. N. Cammidge, K. V. L. Crepy, Tetrahedron 2004, 60, 4377; g) K. Mikami, T. Miyamoto, M.
Hatano, Chem. Commun. 2004, 2082; h) P. Kasak, K. Mereiter, M. Widhalm, Tetrahedron: Asymmetry 2005, 16, 3416; i) O.
Baudoin, Eur. J. Org. Chem. 2005, 4223; j) M. Ciclosi, J. Lloret, F. Estevan, P. Lahuerta, M. Sanau, J.-P. Prieto, Angew.
Chem. 2006, 118, 6893; Angew. Chem. Int. Ed. 2006, 45, 6741; k) M. Genov, A. Almorin, P. Espinet, Chem. Eur. J. 2006,
12, 9346; l) T. Takemoto, S. Iwasa, H. Hamada, K. Shibatomi, M. Kameyama, Y. Motoyama, H. Nishiyama, Tetrahedron
Lett. 2007, 48, 3397; m) M. Genov, A. Almorin, P. Espinet, Tetrahedron: Asymmetry 2007, 18, 625.
[5] K. Sawai, R. Tatumi, T. Nakahodo, H. Fujihara, Angew. Chem. Int. Ed. 2008, 47, 6917.
[6] Y. Uozumi, Y. Matsuura, T. Arakawa, Y. M. A. Yamada, Angew. Chem. 2009, 121, 1.
124
P-45
Gómez-Cuaspud, Jairo A1*; Valencia-Ríos, Jesús S1 and Carda Castelló, Juan B2.
1
Laboratorio de Catálisis Heterogénea, Departamento de Química, Facultad de Ciencias, Universidad Nacional
de Colombia, Bogotá, D.C, Colombia. * jagomezcua@unal.edu.co
2
Grupo de Química del Estado Sólido, Departamento de Química Inorgánica y Orgánica, Universitat Jaume I de
Castelló, Castelló de la Plana, España.
This paper describes the synthesis and characterization of a polycationic oxide based on
La0.75Sr0.25Co0.5Fe0.5O3 system (LSCoF), using a wet chemical route involving the formation of
intermediate species, that evolved of citrate type precursors until the final solid consolidation
depending on temperature, with the aim of obtaining non-densified materials for potential applications
as electrodic components in solid oxide fuel cells (SOFCs). The prediction of the main chemical
species in aqueous solution was determined using Medusa's software[1], which allowed us to determine
the chemical nature of precursor disolution in wide ranges of pH, to avoid the potential formation of
insoluble species. The obtained solid was characterized by X-ray diffraction (XRD) and modeled with
the SPuDS[2] Software, allowing to determine the formation of a perovskite type phase with a index
tolerance factor (Bond Valence Parameter) of 0.9801, orthorhombic space group Pbnm (62), a = 5.396
Å, b = 5.458 Å, c = 7.719 Å, consistent with JCPDS: 089-1267; the scanning electron microscopy
(SEM) and determination of specific surface area by BET method, allowing evaluate the texture and
relief characteristic of solid due to the synthesis method, giving a strong degree of porosity and
roughness showing areas exceeding 10 m2.g-1. The size of crystallites, calculated with the Scherrer
Calculator software, confirmed the presence of nanometric solids (≈ 20 nm), while the overall
composition determined by microprobe energy dispersive X-ray (EDX), indicated a good correlation
between the proposed and obtained composition. The catalytic test was carried out using the catalytic
decomposition of hydrogen peroxide in alkaline medium, establishing that the reaction is of pseudo
first order with respect to peroxide, assuming that the mass of catalyst and concentration of the base
not affect the reaction rate; the isotherms activity, the apparent activation energy (63.4 kJ mol-1) and
the activity observed in general it´s relate to a promising material as a catalyst in partial or total
oxidation reactions.
a. b. c. d.
Figure 1. a. X.R.D. pattern of LSCoF sample, which indicates the presence of perovskite type crystalline phase;
b. Estimated interatomic distances for each component and unit cell of LSCoF system; c. SEM micrographs at
50 μm. d. Isotherms of activity in the decomposition of hydrogen peroxide at different temperatures.
References
[1] Puigdomenech, Ignasi. Make equilibrium Diagrams Using Sophisticated Algorithms MEDUSA. Vers. 29 Apr. 2002. Royal Institute of
Technology. Stocholm, Sweden.
[2] M.W. Lufaso, P.M. Woodward, (2001) "The Prediction of the Crystal Structures of Perovskites Using the Software Program SPuDS"
Acta Cryst., B57, 725-738.
125
P-46
Itzel Guerrero Rios, Elena Novarino, Bart Hessen and Marco Bouwkamp
Molecular Inorganic Chemistry, Stratingh Institute for Chemistry, University of Groningen / Dutch Polymer
Institute (DPI), PO Box 902 5600 AX Eindhoven
Industrial application of single-site catalysts for the production of polyolefines requires their
successful immobilization on solid support to yield heterogeneous catalyst systems.[1] A
drawback of these systems is the lack of immobilization methods that allow a study of the
nature, stability and behavior of the active species on the support. This contribution aims at a
well-defined and quantifiable method for the generation of catalytically active species on
silica supports using an immobilized anilinium borate activator.[2]
Reaction of the borate-modified silica with Cp2*ZrMe2 generates the active species
[Cp*2ZrMe]+, that in the presence of a functionalized α-olefine (allyl methyl thioether) form a
stable 5-ring chelate, as a result of a single insertion into the zirconium-methyl bond.[3] To
release the chelate from the support an ion exchange reaction with tetrabutyl ammonium
bromide provides desorption of the trapped species from the support and allows quantification
and characterization in solution by NMR spectroscopic techniques. The number of active
species will be correlated with the performance of the system in ethylene polymerization.
‡
This work is part of the Research Program of the Dutch Polymer
Institute (DPI), Eindhoven, The Netherlands, project nr. #639.
[1] a) Hlatky, G. Chem. Rev. 100 (2000) 1347. b) Severn, J.R., Chadwick, J.C., Duchateau, R. and
Frederichs, N. Chem. Rev. 105 (2005) 4073.
[2] Jacobsen, W.B., Wijkens, P., Jastrebski, J.T.B.H. and van Koten, G. US Patent 5.834.393 (1998).
[3] Bijpost, E.A., Zuideveld, M.A., Meetsma, A., Teuben, J.H. J. Organomet. Chem. 551 (1998) 159.
E-mail: i.guerrero.rios@rug.nl
www: http://bouwkamp.fmns.rug.nl/
126
P-47
Within the great research field of porous and functional materials, metal-organic frameworks,
MOFs, belong to a new member of the porous solid family. MOFs are three-dimensional
crystalline coordination polymers built by metal ions or clusters that are linked together by
organic ligands, called linkers.1 Since the choice of metals and linkers is unlimited, there is a
wide range of possibilities to construct different MOFs. Micro- and even meso-pores can be
generated in the MOF structures. Heterogeneous catalysis is one of the application areas
where MOFs can play an important role. The interest of introducing catalytic properties into
MOFs is increasing during the recent years.2 Metal ions or linkers can act as catalytic centers.
Immobilization of homogeneous complexes into MOFs is also possible.
A family of isotypical lanthanide-based MOFs, Ln(BTC)(H2O)⋅DMF (Ln: Nd (1),3 Sm (2), Eu
(3), Gd (4), Tb (5), Ho (6), Er (7) and Yb (8)), possessing high thermal stability was
synthesized. The 3D structure contains 1D quadratic channels of size 7.0 x 7.0 Å2 with
accessible lanthanide ions. Since lanthanide ions can adopt flexible coordination spheres, they
are suitable for creating coordinatively unsaturated metal centers. Therefore, the potential to
use our LnMOFs as heterogeneous Lewis acid catalysts for cyanosilylation of aryl aldehydes
and aryl ketones was investigated (Figure 1). The study of size-selectivity, heterogeneity and
recycling of the LnMOFs by different catalytic tests will be presented.
References:
1. a) Yaghi, O. M.; O´Keeffe, M.; Ockwig, N. W.; Chae, H. K.; Eddaoudi, M.; Kim, J. Nature 2003, 423, 705-
713. (b) Férey, G. Chem. Soc. Rev. 2008, 37, 191-214.
2. (a) Forster, P. M.; Cheetham, A. K. Topics in Catalysis, 2003, 24, 79-86. (b) Kesanli, B.; Lin, W.
Coordination Chemistry Reviews, 2003, 246, 305-326. (c) Kitagawa, S.; Kitaura, R.; Noro, S.-I. Angew.
Chem. Int. Ed., 2004, 43, 2334-2375. (d) Schüth, F. Annu. Rev. Mater. Res., 2005, 35, 209-238. (e) Ngo, H.
L.; Lin, W. Topics in Catalysis, 2005, 34, 85-92. (f) Wang, Z.; Chen, G.; Ding, K. Chem. Rev., 2009, 109,
322-359.
3. Gustafsson, M.; Li, Z.; Zhu, G.; Qiu, S.; Grins, J.; Zou, X. Studies in Surface Science and Catalysis, eds.
Gedeon, A; Massiani, P; Babonneau, Proceedings of the 4th International FEZA Conference, 2008, 174 (B),
451-454.
127
P-48
1
Institut für Technische und Makromolekulare Chemie, RWTH Aachen University, Germany.2 School of
Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, USA
Solvents which can reversibly switch from molecular to ionic forms upon applying an
external stimulus were recently reported by the Jessop-Liotta-Eckert groups.[1,2,3]
Specifically, an equimolar mixture of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) or 2-n-
butyl-1,1,3,3-tetramethylguanidine (TMBG) and an alcohol like methanol or hexanol can be
switched from the molecular form to a room temperature ionic liquid by simple exposure to
atmospheric pressure of CO2. The ionic liquids can as easily be switched back to the
molecular form by purging with Ar or N2 and/or heating. The switch from molecular to ionic
form results in a step-change in properties like polarity, density and viscosity.
N
N
N
CO2 (1 bar), RT N
DBU H O
+ ROH
RO O
H
N alcohol Ar or N2 N
or heat (60 °C)
N N N N
TMBG RTIL
Figure 1: Reaction of an equimolar mixture of DBU or TMBG and an alcohol with CO2 to form the
corresponding ionic liquids.
The unique properties of the switchable ionic liquids are opening new avenues to efficiently
perform reaction and separation especially for catalytic reactions. This is exemplified for Pd-
catalyzed C-C-coupling reactions, where along with the desired organic product
stoichiometric amount of salts are formed as by-products, which both need to be separated for
catalyst recycling. Using reversible IL, the product can be extracted out of the ionic liquid
after successful reaction. Then after switching the solvent back to the molecular species the
salts precipitate and can be readily removed by filtration.
Thus, the switchable solvents allow to reversibly adjust the solubility properties of the
medium exactly to the separation problem, providing new strategies for efficient catalyst
recycling.
[1] P. G. Jessop, D. J. Heldebrant, X. Li, C. A. Eckert, C. L. Liotta, Nature 2005, 436, 1102.
[2] L. Phan, D. Chiu, D. J. Heldebrant, H. Huttenhower, E. John, X. Li, P. Pollet, R. Wang, C. A. Eckert, C. L.
Liotta, P. G. Jessop, Ind. Eng. Chem. Res. 2008, 47(3), 539-545.
[3] V. Blasucci, C. Dilek, H. Huttenhower, E. John, V. Llopis-Mestre, P. Pollet, C. A. Eckert, C. L. Liotta,
Chem. Commun., 2009, 116-118.
128
P-49
Both in bulk and fine chemical industry, amines are of great importance, for example as active
pharmaceutical ingredients or building blocks for polymers. Easy and selective access to these
intermediates, atom efficiency, availability and price of starting materials, and waste reduction have
been important issues over the past decades. In this perspective, a promising reaction is the
hydroaminomethylation, which could fulfill the abovementioned requirements and was discovered by
Reppe in 1949 at BASF.[2] This hydroaminomethylation is a transition metal catalyzed cascade
reaction, combining in one pot an alkene hydroformylation and a reductive amination of the
intermediate aldehyde with an amine (secondary, primary or ammonia), leading to the desired amine
product (Scheme 1).
H
CO/H2 HNR2R3 H2
R1 R1 NR2R3 R1 NR2R3
[cat.] R1 O -H2O [cat.]
One of the important issues in homogeneous catalysis is the robustness and recyclability of the catalyst
system in addition to high activity and selectivity.[1,4] With this goal in mind, a rhodium/Sulfoxantphos
system was applied in ionic liquids (Scheme 2). Apart from the excellent activity and chemo- and
regioselectivity for the linear amine (l/b ratios up to 78), the resulting biphasic system allowed easy
product separation and catalyst recycling. In order to investigate the consumption and formation of
(side)products and intermediates in these reactions, product distributions were examined during the
reaction at different temperatures, both in an organic solvent and in the ionic liquid. Additionally, it
was shown that the type of Rh precatalyst and the use of protic organic solvents or ionic liquids
containing a C-H acidic bond in the imidazolium part have a profound effect on activity and selectivity
of the catalyst system. The aforementioned effects will be compared and discussed.
CO/H2
N
HN
organic layer
ionic liquid
Rh(cod)2BF4/Sulfoxantphos
N N
O
PPh2 PPh2
[1] B. Hamers, P.S. Bäuerlein, C. Müller, D. Vogt, Adv. Synth. Catal. 2008, 350, 332-342.
[2] W. Reppe, H. Vetter, Liebigs Ann. Chem. 1953, 582, 133-163.
[3] B. Zimmermann, J. Herwig, M. Beller, Angew. Chem. Int. Ed. 1999, 38, 2372-2375.
[4] B. Hamers, E. Kosciusko-Morizet, C. Müller, D. Vogt, ChemCatChem 2009, submitted.
ACTS-ASPECT is kindly acknowledged for financial support.
129
P-50
H NH
NH2 concentration in vacuo N NH
R R
______________
References:
1. Reviews: (a) Aillaud I., Collin J., Hannedouche J., Schulz E., Dalton Trans., 2007, 5105; (b) Hultzsch K. C.,
Adv. Synth. Catal., 2005, 347, 367.
2. (a) Hannedouche, J.; Aillaud, I.; Collin, J.; Schulz, E.; Trifonov, A. Chem. Commun. 2008, 3552; (b) Aillaud
I.; Lyubov D.; Collin, J.; Guillot, R.; Hannedouche, J. ; Schulz, E. ; Trifonov, A. Organometallics 2008, 27,
5929.
130
P-51
N N t
N N t Bu
Bu Et3OBF4 BF4-
r.t. t Bu
2P Ni
t Bu
2P Ni Bn
Bn
Literature:
[1] A. A. Danopoulos, N. Tsoureas, S. A. Macgregor, C. Smith, Organometallics 2007, 26, 253-263.
[2] M. O. Kristen, P. Hofmann, F. Eisenträger (BASF AG), WO 0202573 A1, 2002
131
P-52
Reference
[1] F. Ungvary, Coord. Chem. Rev., 167(1997) 233.
[2] Y. Zhang, K. Nagasaka, X. Qiu, N. Tsubaki, Catalysis Today 104 (2005) 48.
[3] C. Wu, F. Wu, Y. Bai, et al., Materials Letters, 59(2005)1748.
132
P-53
Reference
[1] A. Behr, J. Eilting, K. Irawadi, J. Leschinski and F. Lindner, Green Chem., 10 (2008) 13.
[2] J. Chaminand, L. Djakovitch, P. Gallezot, et al, Green Chem., 6(2004) 359.
[3] T. Miyazawa, S. Koso, K. Kunimori, et al., Appl. Catal. A., 318(2007) 244.
133
P-54
Konrad Herbst*, Anna Puig Molina, Jens Bæk Simonsen, Pablo Beato and Matteo Caravati
Haldor Topsøe A/S, Nymøllevej 55, DK-2800 Lyngby, Denmark
The industrial production of synthesis gas from hydrocarbon feedstocks by the Autothermal
Steam Reforming process (ATR process, equations I and II) is carried out at temperatures of
up to 1100 ºC. Since the hydrocarbon feedstock or the oxidant often contain some N2, the
production of synthesis gas at these temperatures may be affected by the formation of traces
of ammonia (III) and hydrogen cyanide (IV). Formic acid/formamide is also prone to be
formed in ppm amounts (V).
(I) Steam reforming: -CH2- + H2O ↔ CO + 2H2
(II) Autothermal reforming/partial combustion: -CH2- + 0.5O2 → CO + H2
(III) Ammonia formation: N2 + 3H2 ↔ 2 NH3
(IV) Hydrogen cyanide formation: NH3 + CO ↔ HCONH2 ↔ HCN + H2O
(V) Formic acid formation: HCN + 2H2O ↔ HCONH2 + H2O ↔ HCOOH + NH3
These trace components may lead to problems in condensate treatment units or in poisoning
and deactivation of catalysts in downstream synthesis gas based processes, e.g. the production
of methanol or the Fischer-Tropsch synthesis of hydrocarbons. While NH3 may be easily
removed from the raw synthesis gas by a washing/scrubbing process step, HCN and HCOOX
(X = H, NH2) must be removed by catalytic decomposition. Haldor Topsøe A/S has addressed
this problem by developing a new process for the simultaneous catalytic removal of trace
amounts of HCN and HCOOX from wet synthesis gas [1].
The catalyst for this process, Ag/TiO2,
shows excellent activity and stability in the Catalytic Decomposition of HCN / HCOOH
removal of HCN and HCOOH at 185 °C / 28 bar / SV = 30,000 Nl/kg/h
References
[1] K. Pedersen, I. Dybkjær, P.E. Højlund Nielsen, J. Nerlov, WO2007/124865 (Haldor Topsøe A/S).
134
P-55
Ni3Al intermetallic compound has never been regarded as a catalyst so far. Rather it has been
well known as an excellent high-temperature structural material. Recently we have
successfully fabricated its thin foils by metallurgical process, cold-rolling1, and then found
high catalytic activity for methanol decomposition in the foils. Methanol was effectively
decomposed into hydrogen and carbon monoxide over the foils2,3. It is quite unusual that flat
metallic foils exhibit high activity because of their low surface area.
It is intriguing to examine whether the foils exhibit catalytic activity for another hydrogen
production reaction, methane steam reforming. In this study we investigated the catalytic
properties using the cold-rolled foils with Ni-24 at%Al composition. Before reaction tests, the
foils were oxidized in steam condition at 873 K for 1 h and then reduced at 873 K for 1 h in
flowing hydrogen. This pretreatment was intended to form catalytically active fine Ni
particles on the foil surface. The catalytic properties were examined under S/C=1 condition in
a conventional fixed-bed flow reactor.
Figure 1 shows the methane conversion over the pretreated and as-rolled foils as a function of
reaction temperature. Though the as-rolled foils exhibit some catalytic activity, obviously the
pre-treatment effectively improves the catalytic activity, i.e., it decreases the onset
temperature and increases the activity. We will present the detailed catalytic properties and
the results of characterization of the foil surface.
1
M. Demura, K. Kishida, Y. Suga, M. Takanashi, T. Hirano, Scripta Mater. 47((2002)267.
2
D.H. Chun, Y. Xu, M. Demura, K. Kishida, M.H. Oh, T. Hirano, D.M. Wee, Cat. Lett. 106(2006)71.
3
D.H. Chun, Y. Xu, M. Demura, K. Kishida, D.M. Wee T. Hirano, J. Catalysis, 243(2006)99.
135
P-56
Phosphanylated amino acids have proven to be interesting ligands in catalysis and offer a
wide range of applications.[1] Peptides, proteins and enzymes containing phosphanylated
amino acids are used in stereoselective transition metal catalysis. These new catalysts allow
the properties of homogeneous and enzymatic catalysis to be combined. Furthermore, the
electronic and steric properties of the phosphane can be modified by changing the
substituents.
The aim of our research is to synthesise a variety of phosphanylated amino acids, which then
are incorporated into peptides via solid-phase peptide synthesis. These peptides must feature
an α-helical structure, so that two amino acids in positions i and i+4 are able to coordinate to a
catalytically active late transition metal (e.g., rhodium, palladium, platinum). These
synthesised peptides can be incorporated into the variable part of the binding pocket of the
enzyme RNase A. This enzyme can then act as ligand for late transition metals, and the
catalytic behaviour of the late transition metal complexes can be investigated.
Phosphanylated amino acids are synthesised from chlorophosphanes by the Knochel cuprate
method[2] and from secondary thiophosphane oxides via a new and easy substitution route
(Fig. 1). Not only alkylated and arylated phosphanes are synthesised, but also phosphanes
with a second donor atom, which are able to chelate transition metals (Fig. 2).
[1] A. Agarkov, S. Greenfield, D. Xie, R. Pawlick, G. Starkey, S.R. Gilbertson, Biopolymers, 2005, 84, 48.
[2] P. Knochel, M.C.P. Yeh, S.C. Berg, J. Talbert, J. Org. Chem., 1988, 53, 2392.
136
P-57
Carolina del Pozo, Nathalie Debono, Avelino Corma, Marta Iglesias* and Félix Sánchez*
Instituto de Ciencia de Materiales de Madrid, CSIC. C/ Sor Juana Inés de la Cruz 3, Cantoblanco 28049 Madrid,
Spain. Instituto de Química Orgánica, CSIC. C/ Juan de la Cierva 3, 28006 Madrid, Spain.
Support
O O N
N O Si O
N Si N
O M N
O M N Toluene O
N O
N
O O L
N L
O OH
N Si O [Pd], [Au]
NH O [Pd](MCM-41), [Au](MCM-41)
M: Pd, L: OAc, M: Au; L: Cl
Table 1. Catalytic results from soluble and inmobilized MCM- The reactivity was studied
41-Pd/Au complexes in asymmetric hydrogenation reactions[a] with the soluble as well as
[Pd] [Pd](MCM-41) [Au] [Au](MCM-41) with the heterogenized
counterpart catalysts. The
TOF[b] 565 78 580 166
high accessibility introduced
Ee (%)[c] 15 30 80 98 by the structure of the
[a] [b]
Conditions: 4 atm, 40 ºC, catalyst: 0.1 mol%. TOF: mmol supports allows the
substrate/mmol catalyst min. [c]Determined by HPLC
preparation of highly efficient
immobilized catalysts. The repeated use of the immobilized catalyst in four recycles (the
catalyst is truly immobilized with the post catalysis solution showing no activity)
demonstrates ‘homogeneous’ catalysis with ‘heterogeneous’ catalysts, thus reducing solvent
waste, and loss of precious metal and or ligand. In order to check the stability of metal
complexes supported on the solid matrix, we have characterized the solid before and after
reaction. As can be deduced from IR, 13C NMR and UV-Vis spectra the nature of supported
species is very similar and the most important signals for ligands appear in the same position
after reaction.
1
N. Debono, M. Iglesias, and F. Sánchez, Adv. Synth. Catal. 2007, 349, 2470 – 2476
2
C. González-Arellano, A. Corma, M. Iglesias, F. Sánchez, Adv. Synth. Catal. 2004, 346, 1758-1764
137
P-58
α-Arylated ketones are abundant substructures in natural products and pharmaceutically active
compounds, and can easily be derivatized to the corresponding alcohols or amines. Although
α-alkylations of enolates have been thoroughly investigated, direct arylation reactions of
enolates have been reported only recently, employing Pd catalysis with excess base and
prolonged heating. 1,2
1
Hartwig, J. F. and coworkers, J. Am. Chem. Soc. 2008, 130, 195
2
Garca-Fortanet, J.; Buchwald, S. L., Angew. Chem. Int. Ed. 2008, 47, 8108
138
P-59
Jun Hyuk Jang, Ya Xu*, Masahiko Demura*, Dang Moon Wee, Toshiyuki Hirano*
Department of Materials Science and Engineering, KAIST, Daejeon 305-701, Korea
*National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan
Ni3Al foil catalysts were found to show high catalytic activity for methanol decomposition
due to the formation of fine Ni particles on the foil surface by selective
oxidation/hydroxylation of Al in Ni3Al [1,2]. The result suggests that pre-treatment of the
foils which form large amount of fine Ni particles on the surface is promising for enhancing
the catalytic activity. Recently, the authors have found that it is possible to achieve such
surface modification by two-step treatment, oxidation in air followed by reduction in
hydrogen [3]. In this study, we examined the catalytic properties of the pre-treated Ni3Al foil
catalysts.
Surface structure of cold-rolled Ni3Al foils were modified by oxidation at 973 and 1173 K for
1 and 5 h, and subsequently followed by reduction in hydrogen at 773 K for 1 h. Methanol
decomposition was carried out over the modified Ni3Al foil catalysts at the temperature range
from 513 to 793 K.
Figure 1 shows methanol conversion over the modified and as-rolled Ni3Al foil catalysts as a
function of reaction temperature. The modified Ni3Al foil catalysts exhibited high catalytic
activity for methanol decomposition into H2 and CO, compared to the unmodified foil
catalysts in the whole reaction temperature region. Isothermal test revealed that the modified
Ni3Al foil catalysts exhibited high catalytic activity at 673 K during 24 h of reaction test.
These results indicate that the surface modification with oxidation-reduction treatment
effectively improved the catalytic activity of Ni3Al foil catalysts.
80
o
700 C, 1 h
70 o
900 C, 1 h
Methanol Conversion [%]
o
60 900 C, 5 h
As-rolled
50
40
30
20
10
References
[1] D.H. Chun, Y. Xu, M. Demura, K. Kishida, D.M. Wee, T. Hirano, J. Catal. 243 (2006) 99-107.
[2] J.H. Jang, Y. Xu, D.H. Chun, M. Demura, D.M. Wee, T. Hirano, in press, J. Mol. Catal. A: Chemical (2009),
in press.
[3] J.H. Jang, Y. Xu, M. Demura, D.M. Wee, T. Hirano, Mater. Res. Soc. Symp. Proc. Vol. 1129, 1128-U05-36.
139
P-60
Figure 1: polymer supported (left) and dendrimer supported (center) triphenylphosphine and nanofiltration setup
(right).
We report here on the synthesis of supported ligands and the application of the corresponding
Pd-complexes in the palladium catalyzed Suzuki-Miyaura coupling of aryl halides and
boronic acids. The supported systems show very similar activities as their conventional
homogeneous analogues and can be recycled efficiently by means of nanofiltration.
[1] Detz, R.J., Arévalo Heras, S., de Gelder, R., van Leeuwen, P.W.N.M., Hiemstra, H., Reek, J.N.H. van
Maarseveen, J.H., Org. Lett., 2006, 3227-3230.
[2] Gaikwad, A.V., Boffa, V., ten Elshof, J.E., Rothenberg, G., Angew. Chem. Int. Ed. 2008, 5407-5410.
[3] Janssen, M., Müller, C., Vogt, D., Adv. Synth. Catal. 2009, 313-318
140
P-61
[a] Leibniz-Institut für Katalyse e.V. an der Universität Rostock, Albert-Einstein-Straße 29a, 18059 Rostock
(Germany), Fax: (+49) 381-1281-5000
[b] OXENO Olefinchemie GmbH, Marl, Germany
100%
80%
60%
40%
20%
0%
0 50 100 150 200
141
P-62
The catalytic carboxylation of organic substrates with carbon dioxide as the C1 source is a
highly attractive reaction. By means of environmental aspects, the high abundance and the
non-toxicity makes CO2 synthetically interesting.
Specifically, insertion of CO2 into a palladium pincer σ-allyl bond has been reported to take
place very fast in room temperature.1 The reaction mechanism has not been elucidated in
detail although proposals has been made with a bis-allyl palladium(II) complex2,3 and in the
catalytic carboxylation of allenes with a PSiPPd catalyst.4 The mechanism could take place by
either a normal β-insertion or through a six-membered cyclic transition state resembling the
metallo-ene reaction. (Fig. 1)
In order to differentiate between the two mechanisms, several different substituted σ-allylic
pincer complexes were used since the product substition pattern clearly reveals the
mechanistic pathway. (Fig. 2)
(tBu)2P Pd P(tBu)2
CO2 O O
1,2-insertion
(tBu)2P Pd P(tBu)2
(tBu)2P Pd P(tBu)2 O O
CO2
Metallo-ene mechanism
Multi-nuclear NMR experiments clearly indicates that the reaction follows the metallo-ene
type of mechanism. Theoretical calculations of the mechanistic pathways are currently
proceeding.
References:
1. R. Johansson, O. F. Wendt, Dalton Trans., 2007, 488–492
2. M. Shi, K. M. Nicholas, J. Am. Chem. Soc. 1997, 119, 5057-5058
3. R. J. Franks, K. M. Nicholas, Organometallics 2000, 19, 1458-1460
4. J. Takaya and N. Iwasawa, J. Am. Chem. Soc., 2008, 130, 15254–15255
142
P-63
Abstract. A new efficient reoxidation system for palladium was used in the palladium-
catalyzed aerobic carbocyclizations, which allows a low catalytic loading. Palladium is
efficiently reoxidized by hybrid catalyst 1 consisting of a cobalt Schiff-base catalyst with a
covalently bound quinone.
143
P-64
Polymerization catalysts are routinely single use catalysts, as neither the homogeneous (no
easy recovery mechanism), nor the heterogeneous catalysts (polymer clogs catalyst pores and
entraps the active sites) are easily recoverable and recyclable. Biodegradable poly(esters) that
have wide applications in the biomedical and related industries can be produced by ring-
opening polymerization (ROP) of cyclic lactone monomers. Although many highly active
homogeneous metal complex catalysts have been reported as catalysts for the ROP of
lactones, their application can be hampered by the difficulty and cost associated with
recovering the metal residue. Heterogeneous catalysts (based on porous materials) for lactone
polymerization can be easily recovered, however they usually cannot be reused due to pore
clogging with polymer. We have identified magnetic nanoparticles (MNPs) as an ideal
alternative support for recoverable polymerization catalysts due to their nonporosity, high
external surface area, potential for facile surface modification, and easy recoverability under a
magnetic field.
Here, MNP-supported metal alkoxides based on aluminium and yttrium are reported as a
recoverable and recyclable catalysts for the ROP of ε-caprolactone. The preparation,
characterization and catalytic performce of these new catalysts are reported. Recoverability
and recyclability are also demonstrated.
144
P-65
Compounds containing mono- and diarylphosphinate structural motifs have attracted attention
due to their increasing practical and scientific applications.1 Recently, we have found that
application of microwave irradiation greatly accelerates a palladium-catalyzed cross-coupling
of H-phosphonate diesters with aryl halides.2 Inspired by this observation, we set out to
explore if microwave heating could also be used to facilitate coupling of anilinium
phosphinate, the method of choice for the synthesis of arylphosphinates.3 This substrate seems
to be even better suited for the microwave conditions than H-phosphonate diesters, since as
ionic species it was expected to absorb very efficiently microwave energy via a conduction
mechanism.
In series of experiments, the reaction conditions have been optimized with respect to
supporting palladium ligand, solvent, heating mode and temperature. It was found that the
microwave-promoted reaction is most efficient with wide-bite-angle Xantphos ligand.
Experiments indicated that the reaction acceleration originated from the high temperature but
participation of specific microwaves effects cannot be excluded.
Using the optimized conditions a number of mono- and diarylphosphinates have been
synthesised. In many cases catalyst loading as low as 0.1 mol% could be applied to achieve a
complete conversion into the products after only 10 minutes reaction time. Also, for the first
time, unsymmetrical diarylphosphinic acids could be efficiently synthesized in an one-pot
reaction.
References
1. G. Lligadas, J. C. Ronda, M. Galia, V. Cadiz, J. Polym. Sci., Part A: Polym. Chem. 2006, 44, 5630-5644; M.
Schuman, X. Lopez, M. Karplus, V. Gouverneur, Tetrahedron 2001, 57, 10299-10307.
2. M. Kalek, A. Ziadi, J. Stawinski, Org. Lett. 2008, 10, 4637-4640.
3. J. L. Montchamp and Y. R. Dumond, J. Am. Chem. Soc. 2001, 123, 510-511.
145
P-66
The potential energy surfaces (PESs) of methyltrioxorhenium (MTO) catalyzed C-H insertion
reactions in the presence of hydrogen peroxide are studied by accurate DFT methods for a series of
substrates including unsaturated hydrocarbons, an ether and an alcohol. Based on the comprehensive
analysis of transition states and an intrinsic reaction coordinate (IRC) scans, the C-H insertion is found
to proceed via a concerted mechanism that does not require, as previously thought, a side-on or a
butterfly-like transition state. We have found that a typical transition state follows requirements of the
SN2 reaction instead. Furthermore, based on the exploration of the PESs of several C-H insertion
reactions we discovered that no ionic intermediate is formed even in a polar solvent. The latter was
modeled within the selfconsistent reaction field approach in a polarizable continuum model (PB-
SCRF/PCM).
According to our study, the C-H insertion occurs via concerted but highly asynchronous mechanisms
that at first proceeds via a hydride transfer and than turns into a hydroxide transfer/rebound. For the
oxidation of alcohols, the C-H bond cleavage occurs without the formation of the alkoxide
intermediates within the dominant pathway. The computed deuterium kinetic isotope effect for the
hydride transfer-transition state for alcohol oxidation, 2.9, is in good agreement with the experimental
kH/kD ration of 3.2 reported by Zauche and Espenson. As confirmed by IRC- and PES-scans in
different solvents, the OH-rebound phase of the C-H insertion pathway demonstrates strong
similarities with the rebound mechanism, which was previously proposed for cytochrome P450 and
metalloporphyrin-catalyzed oxidations.
146
P-67
Vinciane Kelsen,a Christophe Vallée,a Christine Bibal,b Catherine C. Santini,b Yves Chauvinb
and Hélène Olivier-Bourbigoua
a
IFP-Lyon, Rond point de l'échangeur de Solaize, 69360, Solaize, France
b
Université de Lyon, ICL, LC2P2, LCOMS, UMR 5265 CNRS-ESCPE Lyon, 43, bd du 11 Novembre 1918,
69626, Villeurbanne Cedex, France
weakly coordinating
anionic part
F Molecular species
metal oxygen covalent bond
- easy characterization
metallic center - good control and design
MLnXm of the metal coordination sphere
F
B O ligands
Ph Ph
Ph P N P Ph
Immobilization on bulky anions
Catalyst stabilization and recycle
Ph Ph
F
aprotic cation
This route for the incorporation of a covalently bonded anionic functionality has been applied
to other alkyl zirconium precursors. The use of the supported complexes as olefins
polymerization and/or oligomerization catalysts will be presented.
1. Bibal C., Santini C.C., Chauvin Y., Vallée C. and Olivier-Bourbigou H. Dalton Trans. 2008, (21), 2866.
147
P-68
1,2,3-Triazoles are an important class of heterocyclic compounds due to their wide range of
applications including as pharmaceutical agents.1 Huisgen 1,3-dipolar cycloaddition of an
azide and an alkyne is an efficacious way for synthesis multifarious the 1,2,3-triazole ring
system.2
In this reaction, the copper (I) catalytic species are directly formed from Cu(I) salts in the
presence of ligands,3a or prepared in situ by reduction of Cu(II) salts with ascorbate,3b
oxidation of copper(0) metal3c or by comproportionation of Cu(0) and Cu(II).3d To improve
the recovery and reuse, copper species have been immobilized onto various supports such as
activated carbon, amine-functionalized polymers, zeolites, amine-functionalized silica and
aluminum oxyhydoxide fiber. Recently some examples were reported for in situ generation of
organic azides using a one-pot procedure to prepare 1,2,3-triazole derivatives based on the
three component coupling reaction.
As part of our continued efforts to utilize heterogeneous catalysts for developing organic
reaction, and as a continued interest to develop efficient synthesis of 1,2,3-triazoles via [3 +2]
cycloadditions, herein we report a highly efficient three-component coupling of epoxides,
alkynes, and sodium azide (A3 Coupling) catalyzed by Cu/C in water. The reaction is general
and can be applied to both aromatic and aliphatic alkynes.
148
P-69
Osmium catalyzed asymmetric dihydroxylation (AD) of olefins is one of the most efficient
reactions for the synthesis of enantiomerically pure vicinal diols.1 However, the high cost of
osmium/chiral ligand and low turnover, as well as the high toxicity of osmium obstruct the
large-scale industrial application of the AD reaction. To address this problem, we prepared
new water-soluble interface ligands and they were applied to supportless recycling of metal-
ligand system in AD reactions for a highly efficient and environmentally friendly recycling
protocol.
References
1. For reviews, see: Kolb, H. C.; Van Nieuwenhze, M. S.; Sharpless, K. B. Chem Rev. 1994, 94, 2483.
2. Lee, D. W.; Lee, H. G.; Kim, S. Y.; Yeom, C. E.; Kim, B. M. Adv. Synth. Catal. 2006, 348, 1021.
149
P-70
Oxidative cleavage of olefins is one of quite useful tools in the arsenal of organic reactions.
Lemieux-Johnson reaction and its variants are widely used for the oxidative cleavage of 1,2-
diols and olefins. Although very useful, these reactions often require quite expensive metal
catalysts such as osmium or ruthenium. Typically OsO4/NaIO4 reaction for the cleavage of
olefins often does not constitute an economically viable reaction on a large scale. In this
regard, ways to minimize the use of expensive metal catalysts are of a great interest to organic
chemists. We have developed a new chemoentrapment strategy for recycling osmium in the
catalytic dihydroxylation1 and have extended this mehtod to olefin cleavage reaction. The
new strategy allowed for an efficient recycling of osmium in the reactions involving mono-
and di-substituted olefins with 1.0 mol% of OsO4 without any significant side reactions and
loss of yield.
After obtaining aldehyde products from the cleavage reaction, the osmium catalyst remains as
Os(VIII) from oxidation using a secodary oxidant such as sodium periodate. To trap the
osmium sepcies, 2-propanol and KOH was added into the system and the Os(VIII) is reduced
to Os(VI). After treatment, osmium exists as OsO42- in an aqueous layer. Products can then be
extracted using organic solvents and osmium in water layer can be recycled for further
reactions. Various solvents were screened to optimize this oxidative cleavage and new
secondary oxidant systems were searched to provide NaClO2 as an optimal oxidant.
References
1. Lee, D. W.; Lee, H. G.; Kim, S. Y.; Yeom, C. E.; Kim, B. M. Adv. Synth. Catal. 2006, 348, 1021.
150
P-71
151
P-72
Leif R. Knöpke, Navid Nemati, Angela Köckritz, Ursula Bentrup, Angelika Brückner
Leibniz Institut für Katalyse an der Universität Rostock e.V.
Albert-Einstein-Str. 29a; D-18059 Rostock; Germany
[1] S. Hoffmann, A. M. Seayad, B. List, Angew. Chem. Int. Ed. 44 (2005) 7424.
[2] O. Berkesi, T. Körtvélyesi, C. Hetényi, T. Németh, I. Pálinkó, Phys Chem. Chem. Phys. 5 (2003) 2009.
[3] C. Sandorfy, D. Vocelle, Can. J. Chem. 64 (1986) 2251.
[4] I. A. Shuklov, N. V. Dubrovina, A. Börner, Synthesis 19 (2007) 2925.
152
P-73
Palladium-catalyzed cross-coupling reactions are one of the most frequently used synthetic
tools for the construction of new carbon-carbon or carbon-heteroatom bonds in organic
synthesis. With the application of homogeneous palladium catalysts several coupling
reactions can be achieved even with less reactive aryl chlorides.
R2 NH 2
Buchwald-Hartwig or Sonogashira coupling
coupling R1
R2 NH
Pd/C
Pd/C
Ligand
Ligand Ar X
R 3 Si Ar
Pd/C or
R 3Si
Hiyama coupling
Application of solid supported palladium catalysts makes the process more beneficial and
provides an opportunity for the recycling of the relatively expensive catalyst and ligand.
Although, the most readily available solid supported catalyst is the palladium on charcoal, its
application in Buchwald-Hartwig amination and Hiyama coupling is unprecedented. Herein,
we report a straightforward and economic procedure for the palladium on charcoal catalyzed
cross-coupling of aryl-halides with terminal acetylenes1, amines and silanes.
1
A. Komáromi, Z. Novák, Chem. Commun., 2008, 4968-4970.
153
P-74
Pd-catalysed hydroxycarbonylation of aryl alkenes is potentially the most efficient route to aryl
propanoic acids, and has consequently attracted much industrial interest.1 Catalysis using Pd-catalysts
of phosphine ligands furnish the desired (racemic) branched acids with good regioselectivity and
productivity. Presently there are no truly efficient chiral catalysts for regio- and enantioselective
hydroxycarbonylation of alkenes, perhaps in part due to the regioselectivity and activity problems that
bidentate phosphine-based catalsts have.
The current dogma is that Pd-monophosphine catalysts give the desired branched acids with good
activity, whereas Pd-diphosphine catalysts tend to give mixtures of linear and branched acids in poor
yield.2 No truly effective asymmetric catalysts have been discovered thus far for the active Pd-
monophosphine systems.
Extensive work has demonstrated a dramatic effect on reactivity and selectivity by modifying reaction
conditions and catalyst structure.2,3 We have investigated very bulky diphosphines, with an ultimative
aim of realising the first efficient asymmetric process. The use of palladium complexes of these novel
ligands showed them to be highly regioselective and active catalysts for the hydroxycarbonylation of
styrene (Figure 1).4
____________
References:
1. (a) I. del Rio, C. Claver and P. W. N. M. van Leeuwen, Eur. J. Inorg. Chem. 2001, 2719; (b) A. Zapf and M.
Beller, Top. Catal. 2002, 19, 101.
2. I. del Rio, N. Ruiz, C. Claver, L. A. van der Veen, P. W. N. M. van Leeuwen, J. Mol. Catal. A 2000, 161, 39.
3. (a) I. Del Rio, N. Ruiz, C. Carmen, Inorg. Chem. Commun. 2000, 166 ;(b) H. Ooka, T. Inoue, S. Itsuno, M.
Tanaka, Chem. Commun. 2005, 1173; (c) A. Ionescu, G. Laurenczy, O. F. Wendt, Dalton Trans. 2006, 3934.
4. (a) J. J. R. Frew, M. L. Clarke, U. Meyer, R. P. Tooze, Dalton Trans. 2008, 1976.
Tina M. Konrad would like to thank the EU, ITN, NANOHOST, for funding her early stage fellowship.
154
P-75
Christoph Kring, Franz Windlin, Peter Deglmann, Frank Rominger and Peter Hofmann*
Organisch-Chemisches Institut, Universität Heidelberg
INF 270, D-69120 Heidelberg, Germany
ph@oci.uni-heidelberg.de
Among large scale industrial production processes of organic commodity chemicals catalytic
electrophilic arene substitution reactions play an important role, one prominent example being
the Lewis acid catalyzed chlorination of toluene with Cl2, which is conducted in commercial
plants on a worldwide scale of around 40 to 50 thousand tons per year. As in most aromatic
substitution reactions not only reactivity and catalyst activity are crucial issues for industrial
applicability, but the regioselectivity - in this case the ratio of o- versus p-chlorotoluene
formation - is of high economic relevance as a consequence of a variable market demand for
both isomers and of their different downstream chemistry. The desire for a rational control of
the o/p isomer ratio of chlorotoluenes has led to the discovery and development of industrially
useful, sulphur-based cocatalyst systems (e.g. thioether, S-heterocycles), which allow to shift
the product distribution towards the more important and more valuable p-chlorotoluene.
The mode of action of these cocatalysts, however, has remained unclear. We will report the
results of a collaborative industrial / academic research project, which - by a combination of
mechanistic, synthetic, spectroscopic and quantum chemical (DFT) methods – has provided
insight into the details of the catalytic cycle of regioselective, cocatalyzed arene chlorination.
The study has revealed the true nature of the catalytically active species as chlorosulfonium
ions and has led to the isolation and characterization of representative examples.
Their geometric and electronic structure features, as required for efficient action, will be
discussed and a quantum chemistry based high-throughput screening methodology has been
developed, which can be employed to search for, to identify and to optimize novel cocatalyst
lead structures. We discuss such a novel cocatalyst system, which – according to
computational prediction - showed promising p-selectivity, and we compare experimental and
theoretical results.
155
P-76
The life science industry represents an essential market for the chemical industry. Due to the
fact that about 80% of the pharmaceuticals in the product pipeline are chiral and furthermore
the FDA is improving the regulations for the launch of chiral pharmaceutical ingredients,
there is an increasing demand for optically active intermediates such as amines, alcohols or
acids. 1 Asymmetric hydrogenation technology provides an excellent access to those
substances; the reaction is clean - only utilizing a small amount of catalyst, solvent, substrate
and hydrogen. 2
Since many chiral ligands are very expensive and/or not readily available, 3 the search for new
structural motifs, which can be generated easily and are based on simple chiral auxiliaries,
plays a fundamental role when expanding asymmetric catalysis to an industrial scale.
Recently we introduced a novel phosphorous free chiral ligand system, which is synthesized
by an easy to do one pot bench top chemistry approach, realizing a large variety of
substitution patterns. This amido ligand class is able to stabilize transition metals, giving rise
to a novel structural type of catalyst, which exhibits high activities and excellent
enantioselectivities in the asymmetric hydrogenation of simple ketones. 4 Herein the
development of this catalyst family is discussed.
OH OH OH OH
F MeO
OH OH OH OH
1
M. Breuer, K. Ditrich, T. Habicher, B. Hauer, M. Keßeler, R. Stürmer, Th. Zelinski, Angew. Chem. Int. Ed.
2004, 43, 788-824.
2
I. C. Lennon, P. H. Moran, Curr. Op. Drug Disc. & Dev. 2003, 6, 855-875.
3
M. Thommen, Speciality Chemicals Magazine 2005, 26-28; H. U. Blaser, F. Spindler, M. Studer, Appl. Catal.,
A 2001, 221, 119-143.
4
T. Irrgang, D. Friedrich, R. Kempe, PCT/EP 2007 009875.
156
P-77
Erik Kühnel, Patrick Hanno-Igels, Ulrike Blumbach, Igor V. Shishkov, Peter Hofmann*
Organisch-Chemisches Institut, Universität Heidelberg,
INF 270, D-69120 Heidelberg, Germany
ph@oci.uni-heidelberg.de
R
R N2 Cu
+
R' R'' -N2 R' R''
R1
N P
N
R2
R3
NHCP ligands
Aiming at diastereo- and enantioselective reactions, we are working both on achiral and chiral
NHCP ligands.
We present our first results related to the coordination chemistry of copper(I) with NHCP
ligands as well as our preliminary findings related to the catalytic cyclopropanation of olefins
with diazo compounds.
1
a) W. Kirmse, Angew. Chem. 2003, 115, 1120; Angew. Chem., Int. Ed. 2003, 42, 1088; b) A. J. DelMonte, E.
D. Dowdy, D. J. Watson, Top. Organomet. Chem. 2004, 6, 97; c) A. Caballero, A. Prieto, M. M. Díaz-Requejo,
P. J. Pérez, Eur. J. Inorg. Chem., 2009, 1137.
2
B. F. Straub, I. Gruber, F. Rominger, P. Hofmann, J. Organomet. Chem., 2003, 684, 124.
3
B. F. Straub, P. Hofmann, Angew. Chem. 2001, 113, 1328; Angew. Chem. Int. Ed. 2001, 40, 1228.
4
a) I. V. Shishkov, F. Rominger, P. Hofmann, Organometallics, 2009, 28, 1049; b) I. V. Shishkov, F. Rominger,
P. Hofmann, Inorg. Chem. 2008, 47, 11755.
5
a) U. Blumbach, Dissertation, Universität Heidelberg, 2007; b) M. Schmitt, Dissertation, Universität
Heidelberg, 2008; c) P. Hanno-Igels, ongoing Dissertation, Universität Heidelberg.
157
P-78
R4
R3 R3
R2 = bridging group
R2
R1
X = PR2, P(OR)2, OP(OR)2
X
X R1
These ligands are highly reactive (TOFs > 10.000) in low-pressure, Rh-catalyzed
hydroformylation reactions of 1-alkenes and also extremely selective for the desired linear (n)
vs. branched (i) aldehyde (n-selectivities > 99%).
We have started to investigate two different approaches towards immobilizing these ligand
systems on polymeric supports, and we present our first results of testing their performance in
Rh-catalyzed hydroformylation reactions.
1
(a) W. Ahlers, M. Röper, P. Hofmann, D. C. M. Warth and R. Paciello, WO 01/58589, 2001; (b) W. Ahlers, R. Paciello, D.
Vogt and P. Hofmann (BASF), WO 02083695 A1, 2002; (c) P. Hofmann, New Catalysts for an Old Reaction: Towards
Rational Ligand Design in Hydroformylation, Invited Lecture, 14th International Symposium on Homogeneous Catalysis,
Munich, 2004, Abstract IL7.
158
P-79
There has been an extensive debate1,2 over whether Heck coupling of aryl iodides with
alkenes can proceed via a Pd(II)/Pd(IV) catalytic cycle. Several recent studies indicate that
aryl iodides are not able to efficiently oxidize Pd(II) to Pd(IV) and therefore Heck coupling
based on a Pd(II)/Pd(IV) cycle can not be realized under usual catalytic condition. However,
van Koten3 and Canty4 have shown that stoichiometric oxidative addition of iodonium salts to
palladium pincer complexes readily afford palladium(IV) species.
We have now found that palladium pincer complexes as well as palladium acetate can be used
as highly active catalysts in Heck-type redox reactions of aryl iodonium salts with
functionalized alkenes under mild conditions. The reaction has a broad synthetic scope and
tolerates sensitive functionalities such as allylic acetates, silanes and aryl bromides, obtaining
highly functionalized products in excellent yields.
According to 31P-NMR spectroscopy, the pincer complex structure remains intact during the
catalytic reaction and mercury poisoning does not affect the catalytic activity. This supports
the theory that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle.
References
1. Sommer, W. J.; Yu, K.; Sears, J. S.; Ji, Y.; Zheng, X.; Davis, R. J.; Sherrill, C. D.; Jones,
C. W.; Weck, M. Organometallics 2005, 24, 4351.
2. Eberhard, M. R. Org. Lett. 2004, 6, 2125.
3. Lagunas, M.-C.; Gossage, R. A.; Spek, A. L.; v. Koten, G. Organometallics 1998, 17, 731.
4. Canty, A. J.; Rodemann, T.; Skelton, B. W.; White, A. H. Organometallics 2006, 25, 3996.
159
P-80
Ragnar Larsson
Chemical Engineering II, University of Lund
P.O. Box 124, SE-221 00 Lund, Sweden
About twenty years ago a model for catalysis was proposed [1]. It was based on the
suggestion of a vibrational resonance between a vibration belonging to the catalyst system
and that vibration in the reacting molecule that turned the molecule into reaction when
excited.The basic idea of the model was that the rate of the reaction was the same as the rate
of energy transfer between the two vibrating systems. This rate is calculated from classical
physics. From this it was possible to deduce an expression for the so called isokinetic
temperature (Tiso) containing both the frequency of the catalyst system (ω) and that of the
reacting molecule (ν).
It also followed from the treatment that the activation energy of the reaction was described as
the sum of the vibrational quanta of ν. Ea = Σ h ν
Recently this model has been tested on reactions involving benzene derivatives. In case A the
hydrodechlorination of chlorobenzene derivatives were studied [2-3]. In case B a series of
oxygen-containing derivatives of benzene was similarly studied [4]. Also the hydrogenation
of benzene to cyclo-hexane was analyzed; case C [5].
The results were in all cases that the “reacting vibration” was an out-of-plane C-H bending.,
In the first two cases ν ≈ 720 ± 30 cm-1 and in one case (A [3] ) it was possible to calculate
the same value ( 749 cm-1 ) from an analysis of the activation energies.
For A the energy donating vibration was 940 cm-1 (i.e. three quanta of ω interacting with four
quanta of ν), for the case B there was a “perfect” resonance, i.e. ω = 750 ± 10 cm-1 (from
neutron scattering data [6]). The two different frequencies correspond to two different
symmetries of the Ni-H stretch [6]. The question why halo substituted species prefer the
higher value and the oxygen substituted prefer the lower of these values is presently
unresolved.
For the platinum catalyzed reaction (case C) we found a value of ν ≈ 400 cm-1 which
corresponds to a ring – distortion mode. The corresponding ω value was found from an
analysis of the frequency dependence of Tiso to be ω ≈ 510 cm-1, corresponding to a Pt-H
vibration (i.e. a quantum ratio of 5 : 4).
The model can also be applied to homogeneous catalytic reactions. The reactions of enzymes
might be assisted likewise from the infrared radiation of the sheath of bonds surrounding the
active center.
160
P-81
Ar' Ar Ar'
R
Ar O
OH OH
Montmorillonite K-10 O
+ R Ar or R
Ar'
R=H, Ph
Ar, Ar'=Ph, Fluorenyl, Ferocenyl
References
1. (a) Hepworth, J. D.; Heron, B. M.. In Progress In Heterocyclic Chemistry; Gribble, G., Joule, J., Eds.;
Elsevier: Amsterdam, 2005; Vol. 17, pp 33–62; (b) Nakatsuji, S. Chem. Soc. Rev. 2004, 33, 348; (c)
Kumar, S.; Hernandez, D.; Hoa, B.; Lee, Y.; Yang, J. S.; McCurdy, A. Org. Lett. 2008, 10, 3761; (f)
Malic, N.; Campbell, J. A.; Evans, R. A. Macromolecules 2008, 41, 1206.
2. (a) Karnik, A. V.; Kulkarni, A. M.; Malviya, N. J.; Mourya, B. R.; Jadhav, B. L. Eur. J. Med. Chem.
2008, 43, 2615; (b) Claessens, S.; Kesteleyn, B.; Van, T. N.; Kimpe, N. D. Tetrahedron 2006, 62,
8419.
3. Tanaka, k.; Aoki, H.; Hosomi, H.; Ohba, S. Org. Lett, 2000, 2, 2133.
4. Gabbut, C. D.; Heron, B. M.; Instone, A. C. Tetrahedron, 2006, 62, 737.
5. Zhao,W.; Carreira, E. M. Org. Lett, 2003, 5, 4153.
6. Dong, Y. W.; Wang, G. W.; Wang, L. Tetrahedron, 2008, 64, 10148
161
P-82
Anna Laurell,a Erica Wingstrand,a Linda Fransson,a,b Karl Hultb and Christina Moberga*
a
KTH School of Chemical Science and Engineering, Organic Chemistry, SE 100 44 Stockholm, Sweden;
b
KTH School of Biotechnology, Department of Biochemistry, AlbaNova University Center, SE 106 91
Stockholm, Sweden
O
O O O R'
+ (L*Ti)2, Et3N (1)
CH Cl N O O
R H R' CN 2 2 R CN (L*Ti)2 = Ti
N O 2
O O O
1. Lundgren, S.; Wingstrand, E.; Penhoat, M.; Moberg, C. J. Am. Chem. Soc. 2005, 127, 11592-11593
2. L. Veum, M. Kuster, S. Telalovic, U. Hanefeld, M. Maschmeyer, Eur. J. Org. Chem. 2002, 1516-1522.
162
P-83
The metallocene catalysts produce the polymers with narrow molecular weight distribution
and uniform comonomer content due to a single active site. In commercial polyethylene slurry
process, hexane or isopropane is used as a diluent. Therefore the metallocene catalysts should
have a good activity in hexane or isopropane in order to use in slurry process. In this paper,
we investigate the effect of the hydrogen volume% on the ethylene polymerization activity
and moleculer weight with zirconocene catalyst in hexane.
Methylaluminoxane impregnated on silica (SMAO) was used instead of MAO in order to
improve the bulk density of polymers. Bis(n-butylcyclopentadienyl)zirconium dichloride (1.0
mg) was activated in hexane (5 mL) with SMAO (160 mg) and then fed into a 1 L reactor
containing hexane (700 mL) and triethylaluminum (0.6 mmol). Polymerization was
performed by continuous feed of ethylene at 9 bar for 1 h.
The yields and molecular weights and molecular weight distributions (Mw/Mn) of the
polymers were in Table 1. Cp2ZrCl2 catalyst, which showed a high activity in toluene, showed
very low activity in hexane. Instead, (n-BuCp)2ZrCl2 showed very high activity in hexane.
This result is due to the solubility of a catalyst in hexane. Cp2ZrCl2 has a low selectivity in
hexane, but has a high solubility in toluene, and (n-BuCp)2ZrCl2 has a high solubility in
hexane. Activities increased at low H2 vol%, reaching a maximum at the H2 vol% of 0.8. A
decrease of the catalyst activity was observed at high H2 vol%. These trend were not observed
in Zigler-Natta catalyst. The molecular weights of the polyethylenes were decreased with
incresing H2 vol%. The effect of hydrogen on the molecular weight was larger in the
metallocene catalyst than Zigler-Natta catalyst. Therefore it was necessary to control H2 vol%
precisely in order to control moleculer weight.
H2 Activity MW MWD
(vol%) (KgPE/gcat/h) x 10-3 (Mw/Mn)
0 149 241.0 2.45
0.18 154 95.1 3.68
0.81 190 12.0 9.35
1.32 152 6.5 9.09
3.33 99 2.9 10.21
References
1. W. Kaminsky and H. Sinn, Adv. Organomet. Chem., 18, 99 (1980).
2. J. M. Vela-Estrada, A. E. Hamielec, Polymer, 35, 808 (1994).
3. K. Soga, T. Arai, H. Nozawa, T. Uozmi, Macromol. Symp., 97. 53 (1995).
163
P-84
Yun-Jo Lee*, Jo-Yong Park, Jong Wook Bae, and Ki-Won Jun
Petroleum Displacement Technology Research Center, Korea Research Institute of Chemical Technology
(KRICT), P.O. Box 107 Yuseong, Daejeon, 305-343, South Korea
To investigate the crystal size effects in the Fischer-Tropsch synthesis (FTS), iron oxide
nanocrystals with particle sizes of 2nm to 12nm were synthesized using oleic acid as a
capping agent and the supported catalysts of 5wt% Fe/Al2O3 were prepared by the
impregnation of δ-alumina (surface area of 127 m2/g) with the colloidal solution of dispersed
iron oxide. The synthesized nanocrystals and the supported catalysts were characterized using
XRD, TEM, TPR, O2 titration, and CO chemisorption. The FTS performances of the catalysts
were examined in a fixed bed reactor. The best results for CO conversion were obtained in the
supported catalyst with 6.3 nm iron oxides. With increases in particle size, the C5+ selectivity
increases but CH4 and C2-C4 selectivity decreases. Similarly, reduction degree increases but
the uptake of adsorbed CO decreases with an increase in particle size. Also, an increase in
turnover frequency (TOF) with increasing particle size is considered due to the reduced metal-
support interaction by the size effect. Furthermore the nanocrystal-loaded Fe/Al2O3 catalysts
prepared from this method exhibited much higher CO conversion and C5+ selectivity than
catalysts prepared by conventional method (impregnation).
10 nm (a) (b)
(c) (d)
(e)
164
P-85
For the hydrogenation of olefins, heterogeneous catalysts such as Pd/C or Ra-Ni are state-of-
the-art. Homogeneous catalysis is used only for asymmetric hydrogenation and rarely for
simple olefin hydrogenation. Nevertheless, the use of a homogeneous catalyst can have a
number of advantages, such as the ability to perform the reaction in a microreactor.
Furthermore there is a need for processes based on environmentally friendly and cost-
effective metals. For this reason we have started a program for the development of a new
cheap homogeneous hydrogenation catalyst based on iron nanoparticles.
Fe-
R H2 R
R Fe- R
R' H2 R'
The iron nanoparticles were prepared by reducing FeCl3 with EtMgBr in THF and appeared to
be effective for the hydrogenation of a range of olefins and alkynes. Olefin hydrogenation is
relatively fast at 5 bar using 5 mol% of catalyst.1 The catalyst is selective for terminal olefins
and 1,1’ and 1,2-cis disubstituted olefins. Trans-olefins and tri-substituted olefins react much
slower. Alkynes could be hydrogenated to mixtures of alkenes and alkanes.
References
(1) P.-H. Phua, L. Lefort, J. A. F. Boogers, and J. G. de Vries, Chem. Commun. submitted
165
P-86
Fig. 1. Sandwich route. The Core NP is functionalised in order to interact with an active precursor of the Shell.
With this aim, metallic nanoparticles functionalised with carboxylic functionalities have been
prepared using novel and innovative routes. Favourable electrostatic and hydrogen bonding
interactions, have been used to associate the particles with a range of shell precursors. These
range from simple metallic cations to new ad hoc designed positively-charged
bipyridylamide-derivatised palladium and platinum coordination complexes.
The second approach examines a one-step formation of nanoparticles stabilised with a ligand
containing a second metal 4 (Fig. 2).
Fig. 2. Direct coordination approach. The Shell metal is embedded in the stabiliser of the Core NP.
1
R. Ferrando, J. Jellinek, R. L. Johnston, Chem. Rev., 2008, 108, 845.
2
M.-C. Daniel, D. Astruc, Chem. Rev., 2004, 104, 293.
3
J.-M. Lehn, Angew. Chem., Int. Ed. Engl. 1990, 29, 1304.
4
J. D. E. T. Wilton-Ely, Dalton Trans., 2008, 25.
166
P-87
The rapidly increasing demand of oil-based chemicals calls for the development of new
technologies based on other natural sources. Among these emerging alternatives, the
methanol-to-olefin process (MTO) in acidic zeolites is one of the most promising. However,
unraveling the reaction mechanism of such an extremely complex catalytic process like MTO
conversion has been a challenging task from
both experimental and theoretical viewpoint.
For over 30 years the actual mechanism has
been one of the most discussed topics in
heterogeneous catalysis.[1] Instead of plainly
following direct routes,[2-3] the MTO
process has experimentally been found to
proceed through a hydrocarbon pool
mechanism, in which organic reaction centers
act as homogeneous co-catalysts inside the
heterogeneous acid catalyst, adding a whole
new level of complexity to this issue.[4-5]
Therefore, a more detailed understanding of
the elementary reaction steps can be obtained
with the complementary assistance of
theoretical modeling.
In this work, a complete supramolecular complex of both the zeolite framework and the co-
catalytic hydrocarbon pool species is modeled through state-of-the-art quantum chemical
techniques [6-7]. This approach provides a more detailed understanding of the crucial
interactions between the zeolite framework and its contents, which form the driving forces for
successful methanol-to-olefin conversion.
167
P-88
80
TG/%
60
40
20
100 200 300 400 500 600 700 800
T/centigrade
ILs
CH3COOH CH3CH2OH CH3COOC2H5
90 2h
ILs
C5H11COOH CH3OH C5H11COOCH3
90 2h
[i]D. W. Kim and D. Y. Chi. Angew. Chem., Int. Ed., 2004, 43, 483.
[ii]A. Wolfson, I. F. J. Vankelecom and P. A. Jacobs, Tetrahedron Lett., 2003, 44, 1195.
168
P-89
Hsin-Yi, Liao*
Department of Science Education, National Taipei University of Education,
Taipei City 10659, Taiwan
hyliao@tea.ntue.edu.tw
The dehydrogenation reaction for the ammonia-borane BH3NH3 molecule was examined
using the density functional theory (DFT) calculations. The structures were optimized at the
B3LYP/aug-cc-PVDZ level of theory. The main interest of this work is to demonstrate that
the acidity or basic catalyst can assist in lowering the activation energy of the
dehydrogenation reaction of the BH3NH3 molecule. Therefore, the thermodynamic and
kinetic stability of BH3NH3 can be adjusted by different catalysts and can also be adjusted
stepwisely by the number and orientation of surrounding catalyst molecules.
In addition, the results for the acidic or basic catalysis are compared with the microsolvation
effect of the dehydrogenation reaction for the BH3NH3 system. The calculations also show
that BH3NH3 can serve as good hydrogen storage systems which release H2 in a slightly
exothermic process.
1.002
1.381
1.374
1.587
+34.106
0.000
(in kcal/mol)
BH3NH3 -7.589
BH2NH2 + H2
1.659
1.393
Reference:
1. Dixon, D. A.; Gutowski, M. J. Phys. Chem. A 2005, 109, 5129.
2. Stephens, F. H; Pons, V.; Baker, R. T. Dalton Trans. 2007, 2613.
169
P-90
Silvia Lovat, Cristiano Bindoli, Miriam Mba, Cristiano Zonta and Giulia Licini
Dipartimento Scienze Chimiche, Università di Padova, via Marzolo 1, 35131 Padova, Italy.
giulia.licini@unipd.it
t-Bu R O O
O O Si O V
1 or 2 t-Bu O R Si O
S + ROOH O V O
t-Bu O R Si R O
SO
O Si O Si
O O O R 2
N 1 Si
S= sulfides, olefins, halides, amines O Si
R R
R=H, t-Bu, CMe2Ph
Here we will report on the catalytic activity of V(V) complexes 1 and 2 for efficient and
selective activation of hydrogen peroxide and alkyl peroxides. Furthermore, we will report on
the LBs capability to selectively modify the catalytic properties of the V(V) complexes via
coordination to the metal center. This approach not only offers the opportunity to module
reactivity and selectivity of the catalytic systems, but also to better understand the basic
principles behind metal activation in synthetic and biological systems.
1. Schneider, C. J.; Penner-Hahn, J. E.; Pecoraro V. L. J. Am. Chem. Soc. 2008, 130, 2712-2713.
2. Mba, M.; Pontini, M.; Lovat, S.; Zonta, C.;. Bernardinelli, G.; Kundig, P.E., Licini, G. Inorg. Chem. 2008,
47,8616-8618. Mba, M.; Zonta, C.; Licini, G. Dalton. Trans. 2009, DOI: 10.1039/b822653a.
3. Lovat, S.; Mba, M.;. Abbenhuis, H.C.L; Vogt,, D.; Zonta, C.; Licini, Inorg. Chem. 2009, 48, DOI:
10.1021/ic802191z.
170
P-91
Liguori, F.; a Barbaro, P.;a Dal Santo, V.;b Galarneau, A.;c Ostinelli, L.;b Pirovano, C.;d Psaro,
R.;b Sordelli, L.;b Vizza, F.;a Bianchini, C.a*
a
* ICCOM -CNR, IDECAT-CNR Unit, Sesto Fiorentino, Firenze (Italy)
b
ISTM –CNR,, IDECAT-CNR Unit, Milano (Italy)
c
ICGM, IDECAT-CNRS Unit, ENSCM, Montpellier (France)
d
Dip. CIMA, Università degli Studi di Milano, Milan (Italy)
e-mail address: francesca.liguori@iccom.cnr.it
1
Barbaro, P.; Bianchini, C.; Dal Santo,V.; Meli, A.; Moreno, M.; Psaro, R.; Sordelli, L. and Vizza, F.; J. Am.
Chem. Soc. 2006, 128, 7065
2
Barbaro, P.; Bianchini, C.; Dal Santo, V.; Meli, A.; Moneti, S.; Pirovano, C.; Psaro, R.; Sordelli, L. and
Vizza, F.; Organometallics, 2008, 27, 2809
3
Di Renzo, F.; Galarneau, A.; Trens, P. and Fajula, F.; Handbook of Porous Materials, Ed. F. Schüth, K. Sing,
J. Weitkamp, Wiley-VCH, 2002, 1311.
171
P-92
Palladium(II)-Catalyzed Reactions
Scope and limitations of the Pd(II)-catalyzed, ligand-promoted oxidative Heck reaction with
arylboronic acids have been explored. The arylation proceeded without the presence of a base
and with air or p-benzoquinone as reoxidants of Pd(0). Oxidative Heck couplings, employing
different arylboronic acids, were smoothly and regioselectively conducted with both electron-
rich and electron-poor olefins, providing high yields even with disubstituted butyl
methacrylate, sensitive acrolein and a vinylboronate ester. Mild aerobic conditions allowed
for the use of substrates sensitive to Pd(II)-catalyzed oxidation. Controlled microwave
processing was used to reduce reaction times from hours to minutes both in small scale and in
50 mmol scale batch processes.1
Electrospray ionization mass spectrometry (ESI-MS) and subsequent MS/MS analyses were
used to directly detect palladium-containing cationic reaction intermediates in the dmphen-
controlled oxidative Heck arylation. The study supports previous mechanistic propositions
and provides new information regarding the composition of aryl containing Pd(II) complexes
in an ongoing oxidative Heck reaction.2
From earlier experiences in the field of Pd(II)-catalyzed oxidative Heck reactions it occurred
to us that it should be possible to produce styrenes from arylboronic acids using low-cost
vinyl acetate as the vinylating agent. According to this hypothesis, the reaction would proceed
without any addition of base or external palladium reoxidant, since β-acetate elimination
should regenerate the active Pd(II). We hereby report the first oxidative Heck-type method for
direct synthesis of styrenes from arylboronic acids or aryltrifluoroborates together with ESI-
MS and MS/MS analyses of palladium-containing reaction intermediates. The findings
support a Pd-mediated release of free ethylene which subsequently undergoes arylation,
providing the styrene product.3
The first Pd(II)-catalyzed P-arylation was performed using palladium acetate, dmphen (2,9-
dimethyl-1,10-phenanthroline), and without addition of base or acid. Couplings of arylboronic
acids or aryltrifluoroborates with H-phosphonate dialkylesters were conducted in 30 min with
controlled microwave heating under non-inert conditions. The excellent chemoselectivity of
the method was illustrated in the synthesis of a MTB enzyme glutamine synthestase inhibitor.
Online electrospray ionization mass spectrometry (ESI-MS) was used to directly detect
cationic palladium species in ongoing reactions.4
(1) Lindh, J.; Enquist, P. A.; Pilotti, A.; Nilsson, P.; Larhed, M.; J. Org. Chem. 2007, 72, 7957-7962.
(2) Enquist, P. A.; Nilsson, P.; Sjöberg, P. J. R.; Larhed, M.; J. Org. Chem. 2006, 71, 8779-8786.
(3) Lindh, J.; Sävmarker, J.; Nilsson, P.; Sjöberg, P. J. R.; Larhed, M.; Chem. Eur. J. 2009, 15, 4630-4636.
(4) Andaloussi, M.; Lindh, J.; Sävmarker, J.; Sjöberg, P. J. R.; Larhed, M., Manuscript in preparation.
172
P-93
Diego Lunaa*, Verónica Caballeroa, Felipa M. Bautistaa, Juan M. Campeloa, Rafael Luquea,
Jose M. Marinasa, Antonio A. Romeroa, Jose M. Hidalgob, Anastacia Macarioc,
Girolamo Giordano
a
Departamento de Química Orgánica, Universidad de Córdoba, Campus de Rabanales, Edificio. Marie Curie,
E-14014 Córdoba, Spain.
b
Seneca Green Catalyst, S.L. Campus de Rabanales, 14014-Córdoba, Spain.
c
Dip. Ing. Chim. & Mat., Università della Calabria, I-870366 Rende (CS), Italy.
*Fax: (+34)957212066
E-mail: qo1lumad@uco.es
We report a methodology to prepare novel biofuels that integrate glycerol in their composition
using covalently immobilised Pig Pancreatic Lipase (PPL). Activated AlPO4 was employed as
support for the covalent immobilization of PPL after functionalisation with
p-hydroxybenzaldehyde (Figure 1) [1].
Figure 1. Immobilization of the enzyme PPL through the ε-amino group of lysine residues.
The biocatalyst was found to be strongly fixed to the inorganic support (94.3%). Quantitative
conversions of triglycerides (TG) and high yields to fatty acid ethyl esters (FAEE) were
obtained under mild reaction conditions. All investigated reactions with free or immobilized
PPL provided yields inferior to 66% that correspond to the transformation of TG in a mixture
of two moles of FAEE and a mole of glycerides, consistent with the high 1,3-regioselectivity
towards more reactive 1 and 3 positions in the triglyceride reported using various lipases [2,
3]. The immobilised catalyst was highly reusable preserving most of its initial activity after 42
runs, and the reaction mixture was easily separated by decantation.
References
[1] a) D. Luna, F.M. Bautista, A. Garcia, J.M. Campelo, J.M. Marinas, A.A. Romero, A. Llobet, I. Romero, I.
Serrano. PCT WO 2004/096442, 2004; b) F.M. Bautista, V. Caballero, J.M. Campelo, D. Luna, J.M.
Marinas, A.A. Romero, I. Romero, I. Serrano, A. Llobet, Top. Catal. (2006), 40, 193-205.
[2] Bornscheuer UT. Lipase-catalyzed syntheses of monoacylglycerols. Enzyme Microb Technol (1995); 17:
578-586.
[3] Bornscheuer, U.T. Enzyme Microb. Technol. 17 (1995) 578-586
173
P-94
The development of new processes with high yields and selectivities combined with minimum
waste generation and energy consumption is one of the key issues in modern chemistry. One
way to reach these goals is to utilize dynamic kinetic resolution (DKR) processes by
combining highly selective and active metal and enzyme catalysts. Such DKR processes
provide several advantages over traditional manufacturing methods. In the best case of a
lipase-catalyzed kinetic resolution, only one stereoisomer reacts, resulting in an enantiopure
product with the maximum yield of 50 %. By applying a DKR process, where the
racemization of the starting material during the kinetic resolution takes place, the theoretical
yield of 100 % may be obtained, leaving no unconverted starting material.
O O O
fast
OH O
kA
PR
SR
k inv k inv-1
O O O
slow
OH O
kB
SS PS
Enantiopure 2-hydroxy-1-indanone is a precursor utilized in the production of 1-amino-2-
indanol which is a useful chiral building block.1 In the ongoing work, we have investigated
different heterogeneous racemization catalysts that can be applied in the DKR of 2-hydroxy-
1-indanone. Satisfactory results were not achieved with various basic or acidic ion
exchangers. Metal catalysts, such as copper and ruthenium, supported on Al2O3, are capable
of racemizing the vicinal hydroxyl ketone moiety in an effective and selective manner.2,3
Herein, we present the results obtained in a heterogeneously catalyzed DKR. The product was
obtained with an enantiomeric excess up to 96 % at a 64-74 % conversion within a 5 h
reaction time at 37-39 °C.
1
a) Vacca, J. P. et. al. Proc. Natl. Acad. Sci. 1994, 91, 4096; b) Liu, S.; Wolf, C. Org. Lett. 2008, 10, 1831; c)
Struble, J. R.; Kaeobamrung, J.; Bode, J. W. Org. Lett. 2008, 10, 957; d) Senanayake, C. H. Aldrichim. Acta
1998, 31, 3.
2 Zaccheria, F.; Ravasio, N.; Psaro, R.; Fsui, A. Chem. Eur. J. 2006, 12, 6426
3 a) Yamaguchi, K.; Mizuno, N. Angew. Chem. Int. Ed. 2002, 41, 4538 (b) Yamaguchi, K.; Mizuno, N.
Angew. Chem. Int. Ed. 2003, 42, 1480 (c) Yamaguchi, K.; Mizuno, N. Chem. Eur. J. 2003, 9, 4353.
174
P-95
The class of ferrocenyl phosphines has grown over the last decade, because many of these
compounds were found to be excellent ligands for transition metals in homogeneous
catalysis. 1 We have already developed high-yield syntheses for enantiopure chiral ferrocenyl
phosphines and shown that the Fe2+ center is selectively and reversibly oxidizable. 2
Recently, a new type of phosphines has been synthesized, namely, potentially switchable
phosphines in which one group is UV/Vis-, pH-, or redox-active, which seem suitable for
modifying the catalytic properties of the corresponding transition metal phosphine complexes
in situ, that is, changing their activity and selectivity. Using 1,1’,2-substituted ferrocenyl
derivatives will allow introduction of planar chirality besides C- or P-chiral centers as well as
an anchor group R’ (R’= -CH=CH2, -SH, -Si(OMe)3) on the second cyclopentadienyl ring,
which can be used for grafting the ligands onto surfaces. 3
RR RR
11
PP
RR22 R= -CH2NMe2, -CHMeNMe2
Fe
Fe R1= R2 or R1≠ R2
R’= anchoring group
R'
R'
Figure 1
The R’-substituted phosphines and complexes thereof with transition metals (Rh, Ru, Pd) will
be prepared and grafted onto suitable surfaces (gold, carbon, polymers, etc.), and their
catalytic reactions (asymmetric hydrogenation, asymmetric hydroformylation, and C-C
coupling) will be studied.
The immobilized switchable catalysts may offer a new approach to this field. Therefore, these
chiral multicenter catalysts are already highly interesting in their own right.
1
T.J. Colacot, Chem. Rev. 2003, 103, 3101
2
S. Tschirschwitz, P. Lönnecke, E. Hey-Hawkins, Organometallics 2007, 26, 4715; R. Kalio, P. Lönnecke, E.
Hey-Hawkins, J. Organomet. Chem. 2008, 693, 590; S. Tschirschwitz, Dissertation, Universität Leipzig, 2007
3
P. Štěpnička, Ferrocenes. Ligands, Materials and Biomolecules, Wiley 2008
175
P-96
Rh-complex
Walphos Ligand H
COOR H2 COOR
N Cs2CO3 N
Boc Boc
MeOH
1a R = Me 2a R = Me
1b R = Et 2b R = Et
1c R = tBut 2c R = tBut
Here, we report a new efficient catalytic system based on rhodium complexes and chiral
bisphosphines of the Walphos family for the enantioselective hydrogenation of 2-substituted
indole derivatives, ee’s up to 85% have been obtained.[5]
________________________
[1] F. Glorius, Org. Biomol. Chem. 2005, 3, 4171-4175.
[2] Y.-G. Zhou, Acc. Chem. Res. 2007, 40, 1357-1366.
[3] a) Catalytic Asymmetric Synthesis; Ojima, I., Ed., 2nd ed.; Wiley-VCH: New York, 2000; b)
Comprehensive Asymmetric Catalysis; Jacobsen, E. N., Pfaltz, A., Yamamoto, H., Eds.; Springer: Berlin,
1999; c) R. Noyori, T. Ohkuma, Angew. Chem. Int. Ed. 2001, 40, 40-73; d) H. U. Blaser, C. Malan, B.
Pugin, F. Spindler, H. Steiner, M. Studer, Adv. Synth. Catal. 2003, 345, 103-151.
[4] For rhodium based hydrogenation of indoles, see: a) R. Kuwano, K. Sato, T. Kurokawa, D. Karube, Y. Ito,
J. Am. Chem. Soc. 2000, 122, 7614-7615; b) R. Kuwano, K. Kaneda, T. Ito, K. Sato, T. Kurokawa, Y. Ito,
Org. Lett. 2004, 6, 2213-2215; c) R. Kuwano, M. Kashiwabara, K. Sato, T. Ito, K. Kaneda, Y. Ito,
Tetrehedron: Asymmetry 2006, 17, 521-535; d) R. Kuwano, M. Sawamura, Y. Ito, Bull. Chem. Soc. Jpn.
2000, 73, 2571-2578; for ruthenium and iridium based hydrogenation of indoles, see e) R. Kuwano, M.
Kashiwabara, Org. Lett. 2006, 8, 2653-2655.
[5]
A. M. Maj, I. Suisse, C. Méliet, F. Agbossou-Niedercorn manuscript submitted.
176
P-97
Ph α γ + B(OH)2
1a Ph α γ
Pd(OAc)2 (10 mol %) 2a
(1.5 equiv)
1,10-phen (12 mol %) 80% (91% conv)
AgSbF6 (10 mol %) 2a/2a' 100:0; E /Z >20:1
1,2-dichloroethane
OAc 60 ÞC, 6 h
Ph γ α + B(OH)2
1a' Ph γ α
(1.5 equiv) 2a'
N N 48% (68% conv)
1,10-phenanthroline (phen)
2a/2a' 0:100; E /Z >20:1
The allyl–aryl coupling with α-chiral allylic acetates took place with perfect α-to-γ chirality
transfer with syn-selectivity. The reaction of (R)-(E)-1b (98% ee) having a non-protected
hydroxyl group with phenylboronic acid gave (S)-(E)-2b with 98% ee in 63% isolated yield.
Pd(OAc)2 (10 mol %)
OAc 2,2'-bipyridyl (12 mol %)
AgSbF6 (10 mol %)
+ B(OH)2
HO HO
1,2-dimethoxyethane
(R)-(E)-1b (1.5 equiv) 60 °C, 6 h (S)-(E)-2b
98% ee 63%, 98% ee
γ/α >99:1; E/Z >20:1
[1] Ohmiya, H.; Makida, Y.; Tanaka, T.; Sawamura, M. J. Am. Chem. Soc. 2008, 130, 17276–17277.
177
P-98
Dendrimers are multi-branched molecules with evenly distributed and well-defined three-
dimensional shapes. Dendritic molecules often adopt a globular structure with regular sized
cavities within the macromolecule, especially those of higher generation [1]. These three-
dimensional cavities within the macromolecule allow the dendrimer to act as suitable hosts
for small guest molecules and metal particles. In some cases dendrimers have been viewed as
potential nano-reactor systems. These cavities within the dendrimeric framework have
recently been exploited in the production of metal nanoparticles with the dendrimers acting as
stabilizing agents [2]
M = Rh, Pd
Over the last couple of years we have been studying the production of new dendrimeric
molecules with the aim of using these as stabilizing agents for metal nanoparticles. Our focus
has largely been on polypropyleneimine (PPI) dendrimers containing a range of different
peripheral functionalities. In this paper we report on the production of Pd and Rh
nanoparticles stabilized by PPI dendrimers modified by alkyl ester functionalities as well as
aromatic amide units on the periphery. These dendrimer-encapsulated nanoparticles were
characterized by techniques such as UV spectroscopy, TEM and ICP-AES. The effect of the
the nature of the peripheral groups of the dendrimer on the stability of the nanoparticles was
studied. Some of these dendrimer encapsulated nanoparticles were evaluated in different
catalytic transformations of organic substrates. Thus for example the dendrimer encapsulated
metal particles (DEMP’s) based on Pd were evaluated in C-C coupling reactions (Heck and
Suzuki coupling), while the Rh systems were evaluated in olefin hydrogenation reactions. In
several cases the encapsulated catalysts were found to be more active than molecular catalysts
based on the same metals even at significantly lower metal loadings. In addition the DEMP
based catalysts can be separated from reaction mixtures via ultra-filtration and then be re-used
without significant loss in activity.
References;
[1] Klajnert, B; Bryszewska, M. Acta Biochemica Polanica., 1990, 48, 199.
[2]R.M. Crooks, M.Q. Zhao, L. Sun, V. Chechik, L.K. Yueng, Acc. Chem. Res., 2001, 34, 181
178
P-99
Institute of Chemical Research of Catalonia (ICIQ), Av. Països Catalans 16, 43007 Tarragona, Spain,
The growing demand for enantiomerically pure compounds for the development of
pharmaceuticals, agrochemicals and flavors has captured the interest of the chemist in the last
few decades. Enantioselective homogeneous metal catalysis is an attractive method for
producing enantiopure compounds. [1]
The enantioselective synthesis of chiral secondary alcohols by catalytic reduction of the
corresponding ketone is an important class of intermediates for the industry. The reduction of
ketones using homogeneous catalysts for hydrogen transfer, with 2-propanol as hydrogen
source, has been investigated extensively in recent years [2], but only few immobilized
homogeneous catalysts have been reported.
The use of immobilized catalysts can provide a significant improvement over the
homogeneous process to overcome the problems of separation and recycling of the catalyst.
Silica is the most common support for the heterogenization for its high stability, inertness and
low cost. [3]
Over the past decade, interest in miniaturisation of chemical reactions has rapidly grown [4].
Microflow reactors have received significant interest in the stream of downsizing of chemistry
and they are expected to make an innovative change for chemical synthesis [5].
In this work, we present the synthesis and the application of silica-anchored ligands and
complexes in the asymmetric transfer hydrogenation reaction. The reaction was studied in
conventional batch systems and in microreactors ( Figure 1).
References:
[1]P. W. N. M. van Leeuwen “Homogenous Catalysis: Understanding the Art”, Kluwer,
Dordrecht, 2004
[2]Gladiali, S., Alberico, E. Chem. Soc. Rev. (2006), 35, 226
[3] Albertus J. Sandee, Daniëlle G. I. Petra, Joost N. H. Reek, Paul C. J. Kamer, Piet W. N.
M. van Leeuwen Chem. Eur. J. (2001), 7, 1202; Del Zotto A., Greco C., Baratta W., Rigo P.
Eur. J. Inorg. Chem (2007), 2909.
[4] Ehrfeld , W., Hessel, V., Löwe, H. “Microreactors: New Technology for Modern
Chemistry”, Wiley-VCH, Weinheim 2000
[5] Manz, A., Becker, H. Eds. “Microsystem Technology in Chemistry and Life Sciences”;
Springer, Berlin, 1999
179
P-100
Javier Mazuelaa, Montserrat Diégueza*, Oscar Pàmiesa, Yvette Mataa, Emmanuelle Teumab,
Montserrat Gómezb*, Fabrizio Ribaudoc, Piet W. N. M. van Leeuwenc,d*
a
Departament de Qumíca Física i Inorgànica. Universitat Rovira i Virgili. Campus Sescelades, C/Marcel·lí
Domingo, s/n. 43007 Tarragona, Spain, Fax: (+34)-97-755-9563; e-mail: montserrat.dieguez@urv.cat
b
Laboratoire Hétérochimie Fondamentale et Appliquée, UMR CNRS 5069. Université Paul Sabatier. Bât 2R1,
2ième étage, 118, route de Narbonne. 31062 Toulouse cedex 9, France, Fax: (+33)-56-155-8204; e-mail:
gomez@chimie.ups-tlse.fr
c
van't Hoff Institute for Molecular Sciences, University of Amsterdam, Nieuwe Achtergracht 166, 1018
WVAmsterdam, The Netherlands, Fax: (+34)-97-792-0224; e-mail: pvanleeuwen@iciq.es
d
Institute of Chemical Research of Catalonia (ICIQ), Av. Països Catalans 16, 43007 Tarragona, Spain
1 See for instance: a) El-Sayed, M. A. Acc. Chem. Res. 2001, 34, 257. b) Bönnemann, H.; Richards, R. M. Eur.
J. Inorg. Chem. 2001, 2455. c) Astruc, D.; Fu, F.; Aranzaes, J. R. Angew. Chem. Int. Ed. 2005, 44, 7852. d)
Migowski, P.; Dupont, J. Chem. Eur. J. 2007, 13, 32.
2 See for instance: a) Studer, M., Blaser, H.-U.; Exner, C. Adv. Synth. Catal. 2003, 345, 45. b) Bönnemann, H.;
Braun, G. A. Angew. Chem. Int. Ed. Engl. 1996, 35, 1992. c) Tamura, M.; Fujihara, H. J. Am. Chem. Soc.
2003, 125, 15742. d) Jansta, S.; Gómez, M.; Philliot, K.; Muller, G.; Guiu, E.; Claver, C.; Castillón, S.;
Chaudret, B. J. Am. Chem. Soc. 2004, 126, 1592. e) Favier, I.; Gómez, M.; Muller, G.; Axet, M. R.;
Castillón, S., Claver, C; Jansat, S.; Chaudret, B.; Philipot, K Adv. Synth. Catal. 2007, 349, 2459.
3 See for instance: a) Phan, N. T. S; van der Sluys, M.; Jones, C. W. Adv. Synth. Catal. 2006, 348, 609. b) de
Vries, J. G. Dalton Trans. 2006, 421. c) Chinchilla, R.; Nájera, C. Chem. Rev. 2007, 107, 874. d) Dúran
Pachón, L.; Rothenberg, G. Appl. Organomet. Chem. 2008, 288.
180
P-101
181
P-102
______________
References:
1. Baricelli, P. J.; López-Linares, F.; Bruss, A.; Santos, R. ; Lujano, E.; Sánchez-Delgado, R. A. J. Mol. Catal. A:
Chemical 2005, 239, 130-137.
2. Pardey, A. J.; Fernández, M.; Moreno, M. A.; Alvarez, J.; Rivas, A. B.; Ortega, M. C.; Méndez, B.; Baricelli,
P. J.; Longo, C. React. Kinet. Catal. Lett. 2000, 70, 293.
182
P-103
The combined metallo- enzymatic catalyzed dynamic kinetic resolution (DKR) of secondary
alcohol or amine is now a useful and well known process. This process can be extended to
more than one stereocenter to obtain diastereomerically and enantiomerically pure compound.
Such process is named dynamic kinetic asymmetric transformation (DYKAT).
Recently our group described the DYKAT of various diols. In order to extent this work we
get interested in aminoalcohols and especially 1,3-aminoalcohols 1 (Scheme 1).
O
Me OH HO R1
NH O N O
Me NO R2
R1 R2 R1 R2 Me
Scheme 2: Acyl transfer
This acyl transfer should occur preferentially on the syn diastereomer yielding the enantiopure
syn aceto-amide.
1
M. Edin, J. Steinreiber, and J. E. Bäckvall Proc. Natl. Acad. Sci. USA, 2004, 101, 5761-5766.
183
P-104
One of the most active and important fields in catalysis is formation and cleavage of bonds
involving carbon atoms. It is of special relevance to perform the direct functionalization of C-
H bonds in simple organic molecules and the C-C bond formation, avoiding activated
reactants, usually expensive and pollutant.[1]
Carmona and coworkers have performed an extensive work in the CH activation on ethers
with hydrotris(pyrazolyl)borate iridium(III) complexes.[2,3] The high reactivity of these
complexes has been described, including multiple C-H bond activations in alkyl and alkylaryl
ethers, as well as C-O cleavage and C-C formation.
[1] Murai, S. (Ed.) Activation of Unreactive Bonds and Organic Synthesis Springer: Berlin, 1999.
[2] Paneque, M.; Poveda, M.L.; Santos, L.L.; et al Angew. Chem. Int. Ed. 2004, 43, 3708-3711
[3] Alvarez, E.; Paneque, M.; Petronilho, A.G.; et al Organometallics 2007, 26, 1231-1240
[4] Lara, P.; Paneque, M.; Poveda, M.L. et al , V. Chem. Eur. J. Accepted.
[5] Carmona, E.; Paneque, M.; Santos, L.L.; Salazar, V. Coord. Chem. Rev. 2005, 249, 1729-1735.
184
P-105
Allylsilylation of alkene is a direct method to introduce both silyl and allyl groups to a
carbon-carbon double bond (Eq. 1).
catalyst
1
R2 + SiR'3 SiR'3 (1)
R R1
2
R
The reaction of aliphatic alkenes using aluminum chloride as a homogeneous catalyst is
currently only one example of allylsilylation.[1] Formation of cationic Me3Si species as an
intermediate was proposed in the allylsilylation with allyltrimethylsilane.[1]
It is well known that allylsilanes can react with silanol groups (Si-OH) on silica to form
surface oxysilane species (Si-O-SiR3) and propylene.[2] These facts encouraged us to attempt
a generation of cationic silane species on solid protonic acid surface by the reaction between
H+ site and allylsilane. If the R3Si+-like species forms, the catalytic allylsilylation should be
proceed. In this work, allylsilylation of alkenes was examined using heterogeneous and
homogenous protonic acids.
Allylsilylation of p-chlorostyrene (1a) with three equivalent of allyltrimethylsilane (2a)
was carried out at 100 oC for 30 min. The results are shown in Table 1. The selection of
catalyst is crucial. H+-montmorillonite showed a high catalytic performance to give (2-(4-
chlorophenyl)-pent-4-enyl)trimethylsilane (3a) with 85% yield based on 1a. The product did
not form with Na+-montmorillonite. H+-exchanged zeolites, such as USY were less active,
while other solid acids, mesoporous silica FSM-16 and Amberlyst, were inactive. The
reaction did not proceed with p-toluenesulfonic acid and H2SO4. We will also present
reactions of various alkenes and spectroscopic analysis of active Si species on solid acid
surfaces.
185
P-106
186
P-107
ethanol acetaldehyde
Oxidation of alcohols to yield carbonyl compounds is one of the most fundamental and important
processes in synthetic organic chemistry. In the search for alternatives driven by the immaturity of
many organic oxidation reactions[1-3] and the necessity for “green” chemical processes,[4-7] several
biocatalytic methods for alcohol oxidation have been developed and are being investigated with
increasing intensity in order to tap the full potential of the excellent chemo-, regio-, and
enantioselectivity of enzymes. Despite their unmatched advantage concerning environmental aspects,
the requirement of cofactors and the availability of redox enzymes to tolerate high concentrations of
organic (co)substrates sets limitations.
Nevertheless, a significant number of bio-oxidations of primary and secondary alcohols employing
laccases[8,9] as well as novel redox enzymes have been developed[10-12].
We found that benzyl alcohol could be oxidised to benzaldehyde employing a wide range of
biocatalysts. The bio-oxidation of primary alcohols to the corresponding aldehydes was most effective
using Janibacter terrae DSM 13953 cells as biocatalyst.
Herein, the biooxidation of benzyl alcohols derivatives as well as alkyl alcohols, allyl and acetylenic
alcohol derivatives was performed employing lyophilized cells of Janibacter terrae in a hydrogen
transfer process using acetaldehyde as hydride acceptor, thus as formal oxidant.
Finally, new media were investigated for the oxidation of alcohols, thus mixtures of water/organic
solvent for various miscible organic solvents (THF, DMSO, DMF, acetonitrile, dioxane, 2-propanol,
1-methyl-2-pyrolidone, t-butanol, acetone).
Acknowledgements: This research was supported by a Marie Curie Research Training Network fellowship in the project
"REVCAT" (MRTN-CT-2006-035866).
[1] Königsmann, M.; Donati, N.; Stein, D.; Schönberg, H.; Harmer, J.; Sreekanth, A.; Grützmacher, H. Angew. Chem. Int. Ed. 2007, 46,
3567-3570.
[2] Gheorghe, A.; Chinnusamy, T.; Cuevas-Yañez, E.; Hilgers, P.; Reiser, O. Org. Lett. 2008, 10, 4171-4174.
[3] Su, F. Z.; Liu, Y. M.; Wang, L. C.; Cao, Y.; He, H. Y.; Fan, K. N. Angew. Chem. Int. Ed. 2008, 47, 334-337.
[4] Sheldon, R. A.; Arends, I.; Hanefeld, U. In Catalytic oxidations in Green Chemistry and Catalysis, Wiley-VCH: Weinheim, 2007.
[5] Thomas, C. M.; Letondor, C.; Humbert, N.; Ward, T. R. J. Organomet. Chem. 2005, 69, 4488-4491.
[6] Bäckvall, J. E. (Ed.) In Modern Oxidation Methods, Wiley-VCH: Weinheim, 2004.
[7] Mirafzal, G. A.; Lozeva, A. M. Tetrahedron Lett. 1998, 39, 7263-7266.
[8] Potthast, A.; Rosenau, T.; Chen, C. L.; Gratzl, J. S. J. Mol. Catal. A: Chem. 1996, 108, 5-9.
[9] Arends, I. W. C. E.; Li, Y. X.; Aunsan, R.; Sheldon, R. A. Tetrahedron 2006, 62, 6659-6665.
[10] May, S. W.; Katopodis, A. G. Enz. Microb. Technol. 1986, 8, 17-21.
[11] Cea, G.; Wilson, L.; Bolívar, J. M.; Markovits, A.; Illanes, A. Enz. Microb. Technol. 2009, 44, 135-138.
[12] Kroutil, W.; Mang, H.; Edegger, K.; Faber, K. Adv. Synth. Catal. 2004, 346, 125-142.
187
P-108
Pilar Palma, M. Ángeles Cartes, Juan Cámpora, Antonio Rodríguez-Delgado and Eleuterio
Álvarez.
Instituto de Investigaciones Químicas, CSIC-Universidad de Sevilla. C/ Américo Vespucio, 49, 41092, Sevilla,
Spain.
Scheme 1
1) a) Small, B. L. et al. J. Am. Chem. Soc., 1998, 120, 4049. b) Bruce, M. et al. Chem. Commun. 1998, 2523.
2) a) Cámpora, J.; Conejo, M. M.; Mereiter, K.; Palma, P.; Pérez, C. M.; Reyes, M. L.; Ruiz, C. J. Organomet.
Chem, 2003, 683, 220. b) Cámpora, J.; Naz, A. M.; Palma, P.; Álvarez, E. Organometallics, 2005, 24, 4878.
188
P-109
The Fischer-Tropsch Synthesis (FTS) is an alternative route to produce liquid fuels from a
variety of carbon feedstocks including coal1 and biomass. Typically iron and cobalt based
catalysts have been used for the FTS reaction, a reaction in which a mixture of CO and H2
(syn-gas) reacts to form hydrocarbons. Enhanced performance has been reported for iron
based systems doped with alkali metals2 and chalcogenides3,4. Sulfides are considered a
poison for most catalytic processes, but sulphur in the form of sulphates (SVI) is found to
enhance the performance of iron based catalysts towards the FTS when present at low
levels3,4.
For these reasons a structural study of a wide range of iron based catalysts has been carried
out using characterisation methods such as X-ray Absorption Fine Structure (XAFS)
spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Powder X-ray Diffraction (PXRD)
and Brunner-Emmett-Taller surface area determination (BET). The characterisation was
performed before and after reduction of the catalysts (under H2) to form the catalytically
active species.
Before reduction, PXRD identified a hematite iron oxide structure (Fe2O3) for all samples.
The crystallinity of the iron oxide materials present, however, varied between samples. PXRD
revealed changes in the iron oxide structure after reduction, the catalyst now mainly being
composed of Fe and Fe3O4. The sulphur containing pre-reduced catalysts had sulphur present
in the +6 oxidation state, as detected by XPS and XAFS. After reduction of these materials,
some reduction of the sulphur oxidation state to +4 is observed, with traces of +2 and 0
present.
189
P-110
The use of solid catalysts has received increasing attention in the past decades. Solid acid
catalysts have afforded important advantages in organic synthesis, for instance, operational
simplicity, nontoxic, reduced equipment corrosion, environmentally compatibility, reusability,
low cost, and ease of isolation [1]. They have potential for safe and highly atom-efficient
processes, and for simple workup procedures that do not produce vast amounts of salt wastes
[2]. On the other hand, α-Hydroxy phosphonates and the corresponding phosphonic acids
display a wide spectrum of biological activity [3]. α-Hydroxy phosphonic acid derivatives
have been shown to be very important enzyme inhibitors. In this regard, we report here the
synthesis of α-hydroxy phosphonates derivatives in the presence of a catalytic amount of
pyridine 2,6-dicarboxylic acid (PDA) in aqueous media. The catalyst can either be recovered
or after separation of the product the remaining aqueous layer can be used directly in the
subsequent reactions. An efficient and simple synthesis of α-hydroxy phosphonates has been
achieved via reaction of aldehydes and ketones with trimethylphosphite in the presence of
catalytic amount of pyridine 2, 6-dicarboxylic acid in water. The method is simple, cost-
effective and environmentally benign.
Refrences:
[1] J.H. Clark, Acc. Chem. Res. 35 (2002) 791-797.
[2] K. Kaneda, Synlett (2007) 999-1015.
[3] D.V. Patel, K. Rielly-Gauvin, D.E. Ryono, Tetrahedron Lett. 31 (1990) 5591-5594.
190
P-111
T = 100 oC; P=20 atm (H2/CO = 1:1), Stirred: 750 r.p.m., Solvent: water T = 100 oC; P =20 atm (H2/CO = 1:1), stirred: 750 r.p.m.,solvent: water
(20 mL), Catalyst= [Rh(Ome)(COD)]2 (0,25x10-3 mol), Substrate= (20 mL); Catalyst= [Rh(OMe)(COD)]2 (0,25x10-3 mol), Substrate =
Eugenol (20x10-3 mol). Ligand = 5 x 10-5 mol [CTAB] = 0.001 M Eugenol (10x10-3 mol), Ligand = 2,5 x 10-5 mol; [CTAB] = 0.005 M.
[1] J. V. Barros, Humberto; Ospina, Maria L., Arguello, Eduardo, R. Rocha, William, V. Gusevskaya, Elena,
dos Santos, Eduardo N. Journal of Organometallic Chemistry, 671, 2003, 150-15.
191
P-112
192
P-113
Alexander Sachse, Abdelkrim El Kadib, François Fajula, Bernard Coq, Anne Galarneau
ICGM – UMR 5253 CNRS/UM2/ENSCM/UM1 ENSCM 8, rue de l’Ecole Normale 34296
Montpellier cedex 5 France
Continuous flow catalytic microreactors offer safe, eco-friendly and intensified processes for
long-term production in fine chemical synthesis. The aim of our work is to investigate
catalytic reactions in a flow-through process using functionalised Monolith reactors
(MonoSil) as catalysts and showing their advantages over reactions performed in batch and
packed-bed reactors. MonoSil consists of a concomitant macroporous (9 µm) and mesoporous
(12 nm) network that allows a fast and controlled diffusion of reactants and products to and
from the active sites within mesopores. The functionalisation of these materials is achieved by
reacting the surface silanols with trialkoxy-organosilanes allowing the grafting of a wide
variety of active organic functions (e.g. basic or acid) by a simple one-step recirculating flow
process. In this way basic NH2-MonoSil and acid HSO3-MonoSil catalysts were elaborated.
The behaviour of these catalysts was evaluated in two reactions: 1) the base-catalysed
Knoevenagel reaction between benzaldehyde and cyanoethylacetate and 2) the acid-catalyzed
transesterification of triacetine with methanol. The outcome of this work demonstrates that
MonoSil catalysts in flow conditions are much more productive than the same catalyst used in
batch and packed-bed reactors. HSO3-MonoSil showed to be 38 times more productive in
monolith than in batch reactor, and 3 times more than in packed-bed microreactor.
Furthermore no deactivation of the MonoSil catalyst for at least 28h was observed1. MonoSil
reactors offer a great prospect in catalysis for fine chemical production.
1
A. El Kadib, R. Chimenton, A. Sachse, F. Fajula, A. Galarneau, B. Coq, Angew. Chem. Int. Ed. in press
193
P-114
Suman Sahoo,a Helena Lundberg, b Nanna Ahlsten, b Xiaodong Zou,*a Belén Martín-Matute*b
a
Department of Structural Chemistry, Arrhenius Laboratory, Stockholm University, 106 91 Stockholm, Sweden
b
Department of Organic Chemistry, Arrhenius Laboratory, Stockholm University, 106 91 Stockholm, Sweden
1. Bartoszewicz, A.; Livendahl, M.; Martín-Matute, B. Chem. Eur. J. 2008, 14, 10547-10550
194
P-115
In all cases, we have confirmed that the catalytic species are only into the solid and no metal
leaching has been detected.
1
M. Eddaoudi, D.B. Moler, H. Li, B. Chen, T.M. Reineke, M. O’Keeffe, O.M. Yaghi, Acc. Chem. Res. 34
(2001) 319; G. Ferey, C. Mellot-Draznieks, C. Serre, F. Millange, J. Dutour, S. Surble, I. Margiolaki, Science,
309 (2005) 2040;
195
P-116
Anders G. Sandström, Karin Engström, Jonas Nyhlén, Alex Kasrayan, Jan-E. Bäckvall
Department of Organic Chemistry, Stockholm University, Svante Arrhenius väg 12, SE-106 91, Sweden
Fig. 1. Model displaying the active site of the (S)-1 selective CalA variant. The catalytic serine
(Ser184), the catalytic triad participant His366 and the oxyanion hole stabilizer Asp95 is displayed.
The preferred enantiomer (S)-1, bound to Ser184, is displayed in its tetrahedral intermediate form.
The new sets of amino acid residues are displayed in dark grey.
196
P-117
In the industrial hydroformylation of olefins other than propene, cobalt-based catalysts still
dominate by far rhodium-based systems. The main reason is the low reactivity of rhodium for
the branched olefins with internal carbon double bonds associated with the high boiling point
of the aldehydes which would impose to much strain to the Rh catalyst during product
separation by distillation. Despite these indisputable and unique benefits, the technology of
cobalt-catalyzed processes has remained basically unchanged over the years. Nevertheless,
some major issues still need to be addressed such as the cobalt recovery and recycle which are
chemical consuming and generate waste.
We propose here a new strategy to recycle and recover the cobalt-catalyst without the addition
of chemicals, by using ionic liquids and pyridine type ligands. The concept is based on the
well-known existence of equilibria among neutral cobalt carbonyl species and charged
carbonyl species in presence of pyridine. The latter charged species are trapped by ionic
liquids, which allow their separation from organic reaction products, and their recycling.
Drifting of these equilibria depends simply on the operating conditions (T, P). HCo(CO)4 can
be simply regenerated from charged species, without adding any chemical product (see
Scheme).
This concept has been successfully applied to the hydroformylation of isooctenes resulting
from the dimerization of n-butenes by the Dimersol XTM process. We will discuss the results
obtained and the influence of the parameters such as the effect of the ionic liquids and basic
ligands in the process and we will propose a reaction and recycle mechanism on the basis of
IR analysis. The recycling of the ionic liquid phase has been performed several times without
loss of activity and selectivity 1 .
Recycle of non-
converted olefins
[HCo(CO)4]
CO/H2 Products
Ionic Liquid P
pyridine
Aldehydes
IL phase
Olefins [Co(py)6]2+[Co(CO)4]2-
T
[PyH]+[Co(CO)4]-
P T Heavy Ends
1
Magna, L., Harry, S., Proriol, D., Saussine, L. and Olivier-Bourbigou, H., Oil and Gas Science and
Technology, 2007, 62 (6), 775-780.
197
P-118
SiMe3 N3
CH3 Me3Si
tBu N - SMe2 SiMe3
CH 3
t
P Cu S tBu N N N
Bu t
N - N2 P Bu
t Cu Cu P tBu
Bu N
SiMe3 R N
SiMe3 Me3Si
1 2
The novel and very labile, fully characterized copper(I)-thioether complex 1 serves as an ideal
precursor, which reacts with various aryl nitrenes forming μ-nitrene bridged dinuclear
copper(I) complexes 2, which have been characterized by spectroscopic methods and by X-
ray crystallography.
The use of tosyl azide as a nitrene-source leads to a dicopper complex structually similar to
intermediates of copper-catalyzed aziridination as postulated by Norrby et al.[4]
The structures of dicopper(I) μ-nitrene complexes will be discussed and their reactivity
patterns will be presented.
1
a) Kwart, H.; Khan, A.A. J. Am. Chem. Soc. 1950, 89, 1951; b) Transition Metals for Organic Synthesis,
2nd Ed., edited by Beller M., Bolm C., 2004 WILEY-VCH, II/392.
2
Straub, B.F.; Hofmann, P. Angew. Chem. In. Ed. Engl. 2001, 40, 1288.
3
a) Shishkov, I. V.; Rominger, F.; Hofmann, P. Organometallics 2009, 28, 1049; b) Shishkov, I. V.;
Rominger, F.; Hofmann, P. Inorg. Chem. 2008, 47, 11755.
4
P. Brandt, M.J. Södergren, P.G. Andersson, P.-O. Norrby J. Am. Chem. Soc. 2000, 122, 8013.
198
P-119
Figure 1: Left: Single reactor line of the SILP catalyst screening rig with gas feeding section, control cabinet,
reactor zone, multiport valve units and GC analysis. Right: Four out of 10 reactor lines.
The performance of a SILP catalyst depends on numerous factors such as support material or
ionic liquid.[3] With the plethora of supports and ionic liquids available, several hundreds of
SILP catalysts are potential candidates. Thus, an efficient and reliable screening technique is
mandatory.
Figure 1 illustrates a single reactor line of a gas-phase catalyst screening rig with ten parallel
fixed bed micro reactors. The rig enables a fast and reliable screening of different SILP
catalysts under steady state conditions. Beside the optimization of the SILP catalyst
composition the determination of kinetic data can be achieved very efficiently. In this work
we present latest results from gas-phase olefin metathesis reactions.
References:
[1] a) D.J. Cole-Hamilton, Science, 2003, 233, 1702; b) M. Haumann, A. Riisager, Chem. Rev. 2008, 108, 1474.
[2] A. Riisager, R. Fehrmann, S. Flicker, R. van Hal, M. Haumann, P. Wasserscheid, Angew. Chem. Int. Ed.
2005, 44, 185.
[3] For recent advances please visit: www.silp-technology.de
199
P-120
Pincer–type complexes constitute a large family of compounds that have attracted much
recent interest. Among those, d8 pincer complexes of the type (LCL’)MII (M = Ni, Pd, Pt; L =
charge neutral ligand, e.g. phosphine, amine, dialkyl sulfide) are a major group. They play
important roles in organometallic reactions, mechanisms and catalysis.1 In contrast, we have
prepared, characterized and computationally studied an unusual d10 (PCP)Pt0 anionic complex
2.2
Na+ P(tBu)2
P(tBu)2 P(tBu)2 F F
2Na C6F6
PtII Cl Pt0 PtII F
Oxidant Fast
1 P(tBu)2 2 P(tBu)2 3 F F
P(tBu)2
Reduction of the pincer-type PtII complex 1 results in the formation of the thermally stable
anionic Pt0 complex 2. This complex adopts a T-shaped structure and exhibits diverse
reactivity, including efficient electron-transfer processes, in which 2 is re-oxidized
quantitatively to PtII, and C-F activation under mild conditions leading to formation of 3.
Protonation of 2 with water gives a PtII hydride complex.
1
a) Albrecht, M.; van Koten, G. Angew. Chem., Int. Ed. 2001, 40, 3750; b) van der Boom, M. E.; D. Milstein,
Chem. Rev. 2003, 103, 1759; c) Singleton, J. T. Tetrahedron 2003, 59, 1837;
2
Part of the results were communicated: Schwartsburd, L.; Cohen, R.; Konstantinovski, L.; Milstein, D. Angew.
Chem. Int. Ed. 2008, 47, 3603.
200
P-121
Organoboronic acids play an important role in organic synthesis because of their use in
various cross-coupling reactions.1 Consequently, there is a large interest to find mild and
selective methods to synthesize these reagents from easily accessible starting materials.
We have found that palladium pincer complexes are excellent catalysts for the synthesis of
organoboronates.2-4 For example, allylic alcohols can be converted to functionalized
allylboronic acids under mild catalytic conditions. The allylboronic acid products can be
isolated as potassium trifluoroborates or as various boronic acid esters. An alternative
approach to avoid the often cumbersome purification of the allylboronic derivatives is to
generate these species in situ. We have shown that the borylation of allylic alcohols can be
efficiently combined with allylation of various electrophiles (e.g. aldehydes, ketones, acetals
and imines) in a one-pot procedure.3,5,6 The products obtained from these reactions are
stereodefined homoallylic alcohols, α-amino acids and amino alcohols. The high regio- and
stereoselectivity of these reactions arises from the highly selective palladium-catalyzed
formation of the transient allylboronates and the selective coupling of these species with the
corresponding electrophile.
OH
R´
R´
R
PhSe Pd SePh
Cl Electrophile NHR´
cat OR
R OH R B COOH
(RO)2B B(OR)2 OR
R
OH
Isolation NHR´
R
R BF3K R Bpin
References:
1. Hall, D. G. Boronic Acids; Wiley: Weinheim, Germany, 2005.
2. Olsson, V. J.; Sebelius, S.; Selander, N.; Szabó, K. J. J. Am. Chem. Soc. 2006, 128, 4588.
3. Selander, N.; Kipke, A.; Sebelius, S.; Szabó, K. J. J. Am. Chem. Soc. 2007, 129, 13723.
4. Dutheuil, G.; Selander, N.; Szabó, K. J.; Aggarwal, V. K. Synthesis 2008, 2293.
5. Selander, N.; Szabó, K. J. Chem. Commun. 2008, 3420.
6. Selander, N.; Szabó, K. J. Adv. Synth. Catal. 2008, 350, 2045.
201
P-122
[1] a) K. Shimizu, K. Sugino, A. Satsuma, Chem. Eur. J. 2009, 15, 2341; b) K. Shimizu, R. Sato, A. Satsuma,
Angew. Chem. Int. Ed., 2009, 48, 3982..
202
P-123
One of the most important properties of silicon rich zeolites is the presence of Al atoms in the
framework and their siting in distinguishable framework T (T = Si, Al) sites. Since the
protons, single metal ions and metal-oxo complexes, representing the active sites in catalytic
and adsorption processes are bound to AlO4- tetrahedra, the crystallographic positions of Al
and the local aluminum distribution govern the location of the active sites and their properties.
Therefore the knowledge of the Al siting is of crucial importance for both experimental and
theoretical studies of catalysts based on silicon rich zeolites.
The siting of Al atoms in distinguishable framework T sites of silicon rich zeolites of the
MFI,1,2 FER, CHA and TON3 structures was investigated employing 27Al 3Q NMR
spectroscopy and DFT/MM calculations. It was found that the siting of Al atoms is neither
random nor controlled by the thermodynamics of Al atoms in the distinguishable framework
T sites. The calculations employing our newly developed bare charged framework model of a
fully hydrated silicon rich zeolite allowed assigning observed 27Al NMR resonances to the
corresponding distinguishable framework T sites for the studied structures. In addition,
particular attention was paid to the presence of Al-O-(Si-O)1,2-Al. Our calculations revealed
that the 27Al NMR isotropic chemical shift of Al in Al-O-(Si-O)1,2-Al in MFI can be
significantly affected (up to 4 ppm) by the presence of the other Al.4 Thus the presence of Al-
O-(Si-O)1,2-Al sequences in zeolites can result in a change of properties of AlO4- tetrahedra.
References
(1) Sklenak, S.; Dedecek, J.; Li, C. B.; Wichterlova, B.; Gabova, V.; Sierka, M.; Sauer, J. Angew. Chem., Int. Ed.
2007, 46, 7286.
(2) Sklenak, S.; Dedecek, J.; Li, C. B.; Wichterlova, B.; Gabova, V.; Sierka, M.; Sauer, J. Phys. Chem. Chem.
Phys. 2009, 11, 1237.
(3) Sklenak, S.; Dedecek, J.; Li, C. B.; Gao, F.; Jansang, B.; Boekfa, B.; Wichterlova, B.; Sauer, J. Collect.
Czech. Chem. Commun. 2008, 73, 909.
(4) Dedecek, J.; Sklenak, S.; Chengbin, L.; Wichterlova, B.; Gabova, B.; Brus, J.; Sierka, M.; Sauer, J. J. Phys.
Chem. C 2009, 113, 1447.
203
P-124
The need for rigid and nanosized scaffolds for the construction of molecularly defined
catalysts is great. For instance, by grafting ligands or metal sites to dendrimers (scheme 1),
molecular weight enlarged, homogeneous catalysts can be obtained. Interestingly, these can
be retained by nanofiltration enabling continuous homogeneous catalysis. Dendritic supports,
however, have several disadvantages that prompt development of new nanosupports. Here we
report alternatives that, unlike dendrimers, do not result from repetitive synthesis steps, steric
congestion in higher generations and high costs [1]. The synthesis of the novel, silsesquioxane
based supports is simple and their size being between 2.5 and 4 nm (Scheme 1).
[1] Halford, B. Chemical & Engineering News 2005, 83, 30-36; Hecht, S.; Fréchet, J. M. J. J. Am. Chem. Soc.
1999, 121, 4084-4085.
[2] Hanssen, R. W. J. M.; Van Santen, R. A.; Abbenhuis, H. C. L. Eur. J. Chem. 2004, 4, 678-683; Van der
Vlugt, J.I.; Ackerstaff, J.; Dijkstra, T. W.; Mills, A. M.; Kooijman, H., Spek, A. L.; Meetsma, A.; Abbenhuis,
H.C.L.; Vogt, D. Adv. Synth. Catal. 2004, 346(4), 399-412.
204
P-125
References
[1] Copéret, C.; Basset, J.-M. Adv. Synth. Catal. 349 78 (2007); Buchmeiser, M. R. Chem. Rev. 109 303 (2009).
[2] Poater, A.; Solans-Monfort, X.; Clot, E.; Copéret, C.; Eisenstein, O. J. Am. Chem. Soc. 129 8207 (2007);
Solans-Monfort, X.; Clot, E.; Copéret, C.; Eisenstein, O. J. Am. Chem. Soc. 127 14015 (2005).
[3] Elias, X.; Pleixats, R.; Wong Chi Man, M. Tetrahedron 64 6770 (2008); Elias, X.; Pleixats, R.; Wong Chi
Man M.; Moreau, J. J. E: Adv. Synth. Catal. 349 1701 (2007); Elias, X.; Pleixats, R.; Wong Chi Man M.;
Moreau, J. J. E: Adv. Synth. Catal. 348 751 (2006).
∗
Xavier Solans-Monfort, Phone: +34 93 5868139, E-mail: xavi@klingon.uab.es
205
P-126
Mohammad Navid Soltani Rad, a* Somayeh Behrouz b and Mohammad Mahdi Doroodmand b
a
Department of Chemistry, Faculty of Basic Sciences, Shiraz University of Technology, Shiraz 71555-313, Iran
b
Department of Chemistry, College of Sciences, Shiraz University, Shiraz 71454, Iran
Huisgen 1,3-dipolar cycloaddition of azides and alkynes to afford 1,2,3-triazole rings has been widely
used in industrial applications and synthetic intermediates. The high tolerance of other functionalities
and the almost quantitative transformation under mild conditions make this reaction an ideal prototype
to demonstrate the concept of ‘click chemistry’ developed by Sharpless and co-workers. However, the
regioselectivity of this cycloaddition reaction is generally low and the reaction usually leads to a
mixture of 1,4- and 1,5-regioisomers. K. B. Sharpless and M. Meldal showed that the rate of this
coupling is dramatically accelerated under copper(I) catalysis, and that only one specific regioisomers
of 1,4-disubstituted 1,2,3-triazole could be obtained. The required copper(I) catalysts are usually
prepared by in situ reduction of copper(II) salts with ascorbate, or by comproportionation of copper(0)
and copper(II). The catalysts might be copper(0) nanosize clusters, or appropriate copper(I) salts (CuI
or CuBr) with triphenylphosphine, iminopyridine, or mono- or polydentate nitrogen ligands. However,
the use of transition metals (copper powder, copper salts, or ruthenium salts) and ligands has led to the
problem of waste disposal. The high costs of transition-metal catalysts coupled with the toxic effects
associated with many transition metals have led to an increased interest in immobilizing catalysts onto
a support. The classic supported reagents can facilitate both the isolation and recycling of the catalyst
by filtration, thus providing environmentally cleaner processes. Hence, in this context, we have
reported the novel nano-sized silica copper sulfate (NSCS) as a highly efficient heterogeneous
catalysis for Huisgen 1, 3-dipolar cycloaddition. The synthesis of NSCS was achieved due to
processes shown as a Scheme 1. The acid-base reaction of SSA with Cu(OH)2 provided the SCS which
subsequently nano-sized under ultrasonic radiation. The NSCS has been used for synthesis the large
number of potential chemotherapeutic agents (nucleosides, antifolates and so on) via Huisgen 1, 3-
dipolar cycloaddition in many different solvents and reaction conditions (Scheme 1). The NSCS has
been demonstrated to have favorable thermal and chemical tolerance and can be reused for many times
without considerable reduction in reactivity.
r.t.
SiO2 OH + ClSO3H (neat) SiO2 OSO3H + HCl
Silica Sulfuric Acid (SSA)
r.t.
2 SiO2 OSO3H + Cu(OH)2 SiO2 OSO3 Cu + 2H2O
2
Silica Copper Sulfate (SCS)
Scheme 1.
NSCS (Cat.) ,Sodium Ascorbate N
R1 N N N + R2 R1 N N
Solvent, Condition
R2
Solvent: H2O-THF, H2O-EtOH, PhMe,THF, MeCN, DMF...
Condition:Room Temprature, Reflux, Microwave...
R1, R2: Many Organic Moieties and Residues
Scheme 2.
Reference:
Huisgen, R. In 1,3-Dipolar CycloadditionChemistry; Padwa, A., Ed.; Wiley: New York, 1984, 1–176
206
P-127
Sergio Vargas, María Ángeles Chávez, Andrés Suárez, Eleuterio Álvarez, Antonio Pizzano
Instituto de Investigaciones Químicas, Consejo Superior de Investigaciones Científicas-Universidad de Sevilla,
Avda Américo Vespucio, 49; 41092, Seville (Spain)
R R
Bu t
P
O P-OP
O P
O (R = iPr, 1)
Bu t
X O H2 X O
P(OMe)2 [Rh(COD)(P-OP)]BF4 P(OMe)2
Ar Ar
X = OBz, NHBz up to 99% ee
[1] M. Rubio, S. Vargas, A. Suárez, E. Álvarez, A. Pizzano Chem. Eur. J. 2007, 13, 1821
[2] R. Engel Chem. Rev. 1977, 77, 349
[3] F. Palacios, C. Alonso, J. M. de los Santos Chem. Rev. 2005, 105, 899
207
P-128
Junliang Sun1, Charlotte Bonneau1, Avelino Corma2, Daliang Zhang1, Mingrun Li1 &
Xiaodong Zou1
1
Structural Chemistry and Berzelii Centre EXSELENT on Porous Materials, Stockholm University, Sweden
2
Instituto de Tecnología Química (UPV-CSIC), Spain
The synthesis of crystalline molecular sieves with pore dimensions that fill the gap between
microporous and mesoporous materials is a matter of fundamental and industrial interest. The
preparation of zeolitic materials with extra-large pores and chiral frameworks would open
new perspectives for their applications. ITQ-37, a germanosilicate zeolite, is the first zeolite
which fulfils all these requirements. Its structure was determined by combining selected area
electron diffraction (SAED) and powder X-ray diffraction (PXRD) in a charge-flipping
algorithm. The framework follows the srs minimal net and its extra-large 30-rings form two
unique cavities where each cavity is connected to three other cavities to form a gyroidal
channel system. These cavities describe the enantiomorphous srs net of the framework. ITQ-
37 is the first chiral zeolite with one single gyroidal channel. It has the lowest framework
density (10.3 T atoms per 1000 Å3) of existing 4-coordinated crystalline oxide frameworks,
and the pore volume of the corresponding silica polymorph would be 0.38 cc.g-1.
ITQ-37 shows a good thermal stability. A pelletized sample calcined at 813K remained stable
during two weeks when stored at room temperature in a moisture free environment.
Acetalyzation of aldehydes of different molecular sizes with triethyl orthoformiate was
performed using an Al containing ITQ-37 sample. Due to its big pore size, ITQ-37 shows
better selectivity to acetal at high conversion with the bulkier aldehyde than zeolite Beta.
The framework and corresponding nets of ITQ-37. a, A slice (15.3 Å thick) viewed down the [111] direction.
Only the T-T connections and the terminal hydroxyl groups are shown. All D4Rs have the same orientation. b,
The 30-ring built from ten tertiary building units. One of them is highlighted. The centres of the tertiary building
units fall on the nodes of one srs net (in orange). c, The large cavity defined by three 30-rings. The centres of
the large cavities fall on the nodes of another srs net (in blue) that represents the gyroidal channel system.
Reference:
1. J. Sun, C. Bonneau, Á. Cartín, A. Corma, M.J. Díaz-Cabañas, M. Moliner, D. Zhang, M. Li, X. Zou “The
ITQ-37 mesoporous chiral zeolite” Nature 2009, 458, 1154-1157
208
P-129
Min Ho Sun a, Bit Na Joo a, Su Kyum Kimb, Kyun Ho Leeb, Myoung Jong Yub
and Sung June Choa,*
a
Department of Applied Chemical Engineering, Center for Functional Nano Materials (BK21),
and the Research Institute for Catalysis, Chonnam National University, Gwangju 500-757, Korea
b
Satellite Thermal and Propulsion Department, Korea Aerospace Research Institute, Taejon 305-333, Korea
E-mail: sjcho@chonnam.ac.kr
Transition alumina, γ-, ρ-, η-, χ-Al2O3 etc is an important class of materials as a binder,
adsorbent and catalyst. Recently, the transition alumina, ρ-Al2O3 has drawn much attention
due to unique rehydration property that is beneficial for the washcoat or forming process,
such as dense body, pellet or sphere. However, the preparation ρ-Al2O3 from Al(OH)3 is not
straightforward because it needs heat treatment in vaccum or flash calcination within 1-10 sec.
There is also a lack of information of ρ-Al2O3 including surface properties, thermal behavior,
etc.
In this work, the Al(OH)3 with different particle sizes, 8-100 μm was used for the preparation
of ρ-Al2O3 using flash calcination at 673-973 K. The obatined alumina was characterized
with X-ray diffraction method, TGA, BET, scanning elecron microscophy and mercury
porosimeter. The crystalline morphorlogy of the Al(OH)3 was retained upon the flash
calcination, which was found to be typical ρ-Al2O3 referred from X-ray diffraction. The
amount of water contained in ρ-Al2O3 can be controlled to 4-7% that was found to be critical
for the binding ability when it was rehydrated. Also, the macroporosity larger than 10 nm in
addition to micropore was developed to offer the route for facile diffusion of reactant and
product without significant attrition or pressure drop.
References
1. P. Souza Santos. Materials Research, Vol. 3, No. 4, 104-114, 2000.
2. Xiaoyi Gong. Ind. Eng. Chem. Res. 2003, 42, 2163-2170.
3. Joseph B. Pullen, United states patent. 3,360,134
209
P-130
The double carbonylation reaction can produce α-keto amides, esters and acids depending
on the nucleophiles employed. These compounds are an important unit in several biologically
important natural products or versatile intermediates for synthesis of α-hydroxy acids, α-
amino acids and others. The traditional protocols for the double carbonylation reaction require
the precious metal palladium as the catalyst.1 Air-sensitive phosphine ligands are usually
required to promote the selectivity of double carbonylation. The use of phosphine ligands is a
major problem associated with the double carbonylation reaction. Developing a novel
catalytic system that is not dependent on phosphine ligands or precious metals to efficiently
mediate this reaction is required.
N N N N N N
Cl Cl
Cu
X
IPrCu-X L1 IPr HCl L2 IMes HCl
1: X = I; 2: X = Cl; 3: X = Br
O R2
R2 IPrCuI/IPr HCl N
R2
I + HN R1
R1 CO/Cs 2CO3 O
R2
NHCs have emerged as a class of ligands in metal-mediated reactions due to their strong
σ-donor properties compared with phosphine ligands, thereby enhancing thestability of NHC
complexes toward heat and moisture.2 This characteristic property is suitable for maintaining
efficient activity in the carbonylation because it is always carried out under rigorous
conditions. On these grounds, [(NHC)CuX] (X=Cl, Br, I) complexes together with
imidazolium salts were first subjected to the double carbonylation of aryl iodides with
secondary amines. Under the optimal conditions, NHC-Cu-X based catalyst system show
excellent activity in the double carbonylation reaction of aryl iodides and secondary amines.3
The new protocol requires a non-precious metal, and has greater generality than those
previously reported.
Reference:
1. (a) Abbayes, H.; Salaün, J. Dalton Trans. 2003, 1041. (b) Ozawa, F.; Soyama, H.; Yamamoto, T.;
Yamamoto, A. Tetrahedron Lett. 1982, 23, 3383. (c) Kobayashi, T.; Tanaka, M. J. Organomet. Chem. 1982,
233, C64.
2. Herrmann, W. A. Angew. Chem., Int. Ed. 2002, 41, 1290.
3. Liu J. M., Zhang R. Z., Wang S. F., Sun W., Xia C. G. Org. Lett. 2009, 11, 1321.
210
P-131
Jean Thivolle-Cazat, Cherif Larabi, Nicolas Merle, Sébastien norsic, Mostafa Taoufik, Anne
Baudouin, Kai Szeto, Aimery de Mallmann*, Jean-Marie Basset*
Laboratoire de Chimie Organométallique de Surface, UMR C2P2 CNRS-CPE-UCBL 5265
43 Bd du 11 Novembre 1918, 69616 VILLEURBANNE, Cédex, France. thivolle@cpe.fr
The low-temperature Fischer-Tropsch process produces rather pure and mainly long chain n-
paraffins, up to C120. These long chains meet few economically interesting applications except
as coating or lubricant. Conversely, diesel derived from the hydrocracking of F-T waxes with
a cetane number of about 70 can be used to upgrade lower quality diesel.1 Usual
hydrocracking processes are based on acidic catalysis at high temperature leading to
deactivation by coke formation. Therefore, it appears interesting to develop new
hydrocracking catalysts running at low temperature.
Surface Organometallic Chemistry (SOMC) is aimed at preparing well-defined supported
organometallic species by grafting molecular complexes (Ti, Zr, Hf, Ta, Mo or Re ) on a
support. 2 In this way, the tetra(neopentyl)titanium complex Ti(CH2CMe3)4 1 reacts with the
OH groups of a silica-alumina (HA-S-HPV, Akzo-Nobel, 390 m2/g) treated at 500°C, forming
mono- and bisgrafted species on the surface (≡SiO)Ti(CH2CMe3)3 2a and
(≡SiO)2Ti(CH2CMe3)3 2b in a ratio close to 1/1. These surface complexes were fully
characterised by spectroscopic methods, as well as elemental and mass balance analysis.
Treatment under hydrogen at 150°C of 2a and 2b led to a mixture of supported Ti species.
IRTF, ESR, 1H MAS, DQ solid-state NMR show the presence of ca 4% [(≡SiO)2TiH2], 3a,
81% [(≡SiO)2Ti(Me)-H], 3b and [(≡SiO)3Ti-H], 3c, 15% [(≡SiO)3TiIII], 3d, along with (SiHx)
and (AlHx) fragments via the opening of adjacent Si-O-M bridges (M = Si, Al).
Species 3a-d efficiently catalyzes the hydrogenolysis of waxes (Figure 1) in a semi-
continuous flow reactor at 180°C, 1bar H2 and prove more active and selective towards diesel
than [TiH]/SiO2 and also more selective than [ZrH]/SiO2-Al2O3. The key catalytic step is
likely a β-alkyl transfer.
a) b) c)
12 8 70
Wax Gas Gasoline Diesel
7 60
10
% Weight selectivity
6
50
8
Weight %
Weight %
5
40
6 4
30
3
4
20
2
2 10
1
0 0 0
Gas Gasoline Diesel
13
19
3
25
11
5
17
7
7
1
C3
C9
24
26
30
32
34
38
42
40
C2
C1
C2
C2
C
C
C
C2
C3
C
C
C
C
C
C
Figure 1: Hydrogenolysis of ASTM D87 wax catalyzed by [Ti-H]/SiO2-Al2O3 (200 mg, 1,82 wt% Ti; 400 mg
wax; 180°C, H2: 1Bar, 20ml/min); weight distribution of a) wax; b) hydrogenolysis products; c) categorized
hydrogenolysis products.
[1] Leckel, D.; Liwanga-Ehumbu, M. Energy & Fuels 20, (2006), 2330-2336.
[2] Lefebvre, F.; Thivolle-Cazat, J.; Dufaud, V.; Niccolai, G. P.; Basset, J.-M. Appl. Catal., A: 182, (1999), 1-8.
211
P-132
Mostafa Taoufik*, Nicolas Merle, François Stoffelbach, Erwan Le Roux, Jean Thivolle-
Cazat, Jean-Marie Basset*
Laboratoire de Chimie Organométallique de Surface, UMR C2P2 CNRS-CPE-UCBL 5265
43 Bd du 11 Novembre 1918, 69616 VILLEURBANNE, Cédex, France, taoufik@cpe.fr
The alumina supported tungsten hydride W(H)3/Al2O3, 3 was previously found to catalyse the
alkane metathesis reaction which transforms any light alkane into its higher and lower
homologues.1,2 For instance, propane was transformed into a mixture of ethane and butanes
with smaller amounts of methane and pentanes.
The product selectivities in linear alkanes metathesis3 always follow the order Cn+1 > Cn+2 >>
Cn+3 which are governed by steric interactions between substituents in [1,2] or [1,3]-positions
of metallacyclobutanes.4 Surprisingly, in the case of 2-methylpropane, whereas (≡SiO)2TaH
obeys the classical mechanism,4 complex 3 gives rise to the formation with a high selectivity,
of an unexpected product: 2,3-dimethylbutane; in this case, the product selectivities ranges as
follows: Cn+2 >> Cn+1 > Cn+3 (Figure 1). Then, this metathesis reaction of an iso-Cn paraffin
leads to an iso-Cn+2 product instead of an iso-Cn+1, that is, involves formally the selective
transfer of two carbons instead of one carbon as usually observed and depicted in the classical
mechanism previously proposed for this reaction.4
Similarly, complexe 3 also transforms unexpectedly 2-methylpropene to 2,3-dimethyl-
butenes (Figure 2) with a good selectivity which is the first example of productive metathesis
of 2-methylpropene; again this highlights the role of 2-methylpropene as a primary product
for the metathesis of 2-methylpropane. Therefore the following mechanism is proposed which
shows the connection between the metathesis of 2-methylpropane and 2-methylpropene and
explains the formation of all the products (scheme 1), given that alkanes arise from a
subsequent hydrogenation of the liberated olefins.
CH4
H H Me
M M
7a M
5a
8b
3 M
4 M H
(a) M H 6a (b) 6b M H (c) 4 M H
H
H
3 M M M
8a M 5b
7b
Scheme 1: (a) and (c) classical and (b) unusual mechanistic pathways in the metathesis of 2-methylpropane
and 2-methylpropene (M = W).
References
[1] Le Roux, E.; Taoufik, M.; Baudouin, A.; Coperet, C.; Thivolle-Cazat, J.; Basset, J. M.; Maunders, B. M.; Sunley, G. J.
Adv. Synth. & Catal. 349, (2007), 231-237.
[2] Le Roux, E.; Taoufik, M.; Coperet, C.; de Mallmann, A.; Thivolle-Cazat, J.; Basset, J. M.; Maunders, B. M.; Sunley, G. J.
Ang. Chem. Int. Ed. Engl. 44, (2005), 6755-6758.
[3] Vidal, V.; Theolier, A.; ThivolleCazat, J.; Basset, J. M. Science 276, (1997), 99-102.
[4] Basset, J. M.; Coperet, C.; Lefort, L.; Maunders, B. M.; Maury, O.; Le Roux, E.; Saggio, G.; Soignier, S.; Soulivong, D.;
Sunley, G. J.; Taoufik, M.; Thivolle-Cazat, J. J. Amer. Chem. Soc. 127, (2005), 8604-8605.
212
P-133
Lisa K. Thalén, Dongbo Zhao, Jean-Baptiste Sortais, Jens Paetzold, Christine Hoben,
and Jan-E. Bäckvall*
Department of Organic Chemistry, Stockholm University, Arrhenius Laboratory
SE-106 91, Stockholm, Sweden
An efficient process for the dynamic kinetic resolution of primary amines has been developed
by our group via the combination of a ruthenium catalyst and a lipase, which provides the
corresponding amides in high yields and high enantiomeric excess. The protocol was
applicable with either isopropyl acetate or dibenzyl carbonate as the acyl donor. In the latter
case release of the free amine from the carbamate products was carried out under very mild
conditions. We have also developed a new route to NorSertraline, starting from readily
available 1,2,3,4-tetrahydro-1-naphthylamine utilizing dynamic kinetic resolution as one of
the key steps. The racemization of (S)-1-phenylethylamine with several different Ru-catalysts
was evaluated and a racemization study of three different amines with varying electronic
properties was also performed to determine the kinetic isotope effect.
NH2 . HCl
O
Thalén, L.K.; Zhao, D.; Sortais, J.-B.; Paetzold, J.; Hoben, C.; Bäckvall, J.-E., Chem. Eur. J.
2009, 15, 3403-3410.
213
P-134
Ionic liquids (ILs) and supercritical carbon dioxide (scCO2) emerged in recent years as a
convenient solvent combination for carrying out continuous homogenous catalysed reactions
under biphasic conditions.[1,2] While the polar IL-phase is highly suited for dissolving and
immobilising the catalyst, scCO2 acts as the mobile phase for selectively extracting the
products without any detectable IL cross-contamination. Moreover, in reactions involving
gaseous reactants the presence of scCO2 results beneficial as it leads to a considerable
enhancement of the gas availability in the catalyst phase and to an improved mass transfer.
The asymmetric ketone hydrogenation is an extremely useful transformation and a variety of
catalysts have been developed for this purpose.[3] Within the cooperation project ChirAmAl,
we are aiming to establish a continuous asymmetric hydrogenation of ketones with integrated
product extraction by scCO2.
As first benchmark reaction, the hydrogenation of methyl-propionylacetate was carried out
using a readily available Ruthenium-BINAP catalyst. A comparison between batch, semi-
batch and continuous mode in IL/scCO2 system will be presented. Especially the influence of
pressure and temperature on activity and enantioselectivity were investigated.
H2
O O Ru - cat. OH O
H 3C CH3 H 3C CH3
O O
ionic liquid; CO2
214
P-135
Kevin Guillois,1 Malika Boualleg,2 Laurence Burel,1 Jean-Marie Basset,2 Chloé Thieuleux,2
Valérie Caps1*
1
Institut de recherches sur la catalyse et l’environnement de Lyon (IRCELYON, CNRS / Université de Lyon), 2
avenue Albert Einstein, F-69626 Villeurbanne Cedex, France.
2
Laboratoire LCCPP (UMR 5265 CNRS-ESCPE-UCBL, équipe LCOMS), 43 Bd du 11 Novembre 1918, 69100
Villeurbanne, France
*valerie.caps@ircelyon.univ-lyon1.fr
Gold nanoparticles have been shown to catalyze a variety of oxidation reaction both in the gas
and liquid phase.1 In gas phase oxidations (e.g. CO oxidation), their unique activity at low
temperature critically relies on their association with a reducible oxide support (e.g. TiO2)
which allows to trigger oxygen activation. In the aqueous phase, unsupported gold sols can
readily oxidize glucose with molecular oxygen; however, the use of an activated carbon
support allows preventing particle aggregation and hence deactivation of the catalyst.2
Recently, we have shown that supported nanoparticles could selectively oxidize trans-stilbene
with molecular oxygen, using methylcyclohexane (MCH) as solvent.3 Here we present the
synthesis and catalytic properties of gold sols in MCH. We show how the nature of the
stabilizing agent influences activity and stability in the aerobic oxidation of bulky alkenes.
The gold sols were prepared using a classical biphasic system4 using a tretraalkyl ammonium
compound as the phase transfer agent and octylsilane, octylthiol or ammonium as the
stabilizing ligands. Elemental analysis and TEM allowed obtaining gold contents and gold
particle size respectively. For catalytic evaluation, the alkene (substrate, 1 mmol) was
dissolved in MCH (solvent, 20 mL / 155 mmol)
and stirred (900 rpm) in air (1 atm) at 80°C, in 100
the presence of tert-butyl hydroperoxide
(TBHP, 0.05 mmol, i.e. 5mol%) and the gold 80
215
P-136
To reach this goal, we have developed a two step synthetic methodology involving:
1) the direct synthesis at room temperature of a colloidal solution of the Pt3Sn alloy
2) the growth of a silica mesoporous structure around the Pt3Sn nanoparticles using the
sol-gel process via a templating routes.
Using this new methodology, we have achieved the quantitative incorporation and the
uniform distribution of 2 nm Pt3Sn particles along the pore channels of a silica matrix, as
shown by extensive characterization of the as-synthesized Pt3Sn colloids and the nanoparticle-
containing silica material (X-Ray Diffraction, Nitrogen adsorption/desorption, elemental
analysis, T.E.M., EDX, Mössbauer …).
5
This material turned out to be highly active
at much lower temperature than a reference 4
rCO (mmol gPt s )
-1
of CO (PROX: 2% CO / 2% O2 / 48% H2 in 3
-1
He, atmospheric pressure, 50 ml min , 2
GHSV ~ 3000 h-1) (Figure). Light-off
temperature is indeed decreased by 95°C. 1
This stable Pt3Sn catalyst, which is thus
0
active below 100°C, could be potentially 0 50 100 150 200 250 300
applied in the promising proton exchange Reaction temperature (°C)
membrane fuel cell technology of the future
hydrogen economy.
Mass specific CO oxidation rates in the absence (empty
symbols) and in the presence (full symbols) of hydrogen
over the reference Pt/SiO2 (triangles) and our Pt3Sn/SiO2
(diamonds) catalyst
216
P-137
Richard H. Heyn, Terje Didriksen, Arne Karlsson, Knut Thorshaug, and Ørnulv B. Vistad
SINTEF Materials and Chemistry, Process Chemistry Departmen, P.O. Box 124 Blindern, 0314 Oslo, Norway
Carbon dioxide, CO2, is a viable and sustainable albeit not very reactive C1 feedstock. Two
industrially relevant processes where replacement CO2 could have great impact on chemical
sustainability are as substitutes for phosgene in the production of aromatic carbamates
relevant to the polyurethane industry, and in the production of dimethylcarbonate (DMC).
Improved CO2 reactivities have been observed when ionic liquids (ILs) are part of the
reaction scheme. In particular, synthesis of diphenylurea (DPU), a potential precursor to
aromatic carbamates, is reported to be produced in moderate yields in ILs,1 while the addition
of ILs has been shown to improve the yield of DMC in some cases.2 In order to investigate
the potential of ILs in these reactions, and to study a large variety of ILs systematically, we
have initiated a high-throughput screening of a large parameter space of ILs and catalysts for
the production of DMC and aromatic carbamates.
Batch scale reactions for the synthesis of DMC from MeOH, CO2, MeI, the IL [emim]Br and
K2CO3 in general reproduced literature results.2 If the reaction is run under N2 instead of CO2,
approximately the same yield of DMC is obtained, suggesting that CO32- is a viable source of
a carbonyl group in these reactions. CO2 is however necessary for DMC production when
KOH is used as a catalyst. Some dimethylether is detected as a gas phase product, consistent
with the proposed mechanism for the formation of DMC from MeOH, CO2, and MeI.3
While no by-products are reported for DPU synthesis from aniline and CO2, in [bmim]Cl and
with CsCO3 as catalyst,1 in our hands the yield is only 8.4 %, a third of that reported. In
addition, significant amounts of secondary amine by-products are observed, as a result of
nucleophilic attack of aniline on the Me and Bu groups of the [bmim]Cl IL. Addition of an
alcohol to this reaction has not yet provided any carbamate. Interestingly, we have found a
different system whereby a stoichiometric activator for the synthesis of DPU from CO2 and
aniline becomes a catalyst upon addition of an IL. The effect of the IL on this reaction is still
under investigation.
Acknowledgements
This work was only made possible through the generous support from the GASSMAKS
program of Norwegian Research Council, Huntsman Polyurethanes and Sasol UK.
References
[1] Shi, F. et al. Angew. Chem. Int. Ed. 2003, 42, 3257.
[2] (a) Wang, H. et al. Chin. Chem. Lett. 2005, 16, 1267. (b) Cai, Q.H. et al. Chin. J. Chem. 2004, 22, 422.
[3] Fujita, S. et al. Green Chem. 2001, 3, 87.
217
P-138
Due to the accessible higher oxidation states, ruthenium complexes are now regarded as the
most promising water oxidation catalysts to mimic the oxygen-evolving complex (OEC) in
Photosystem II (PSII) . During the past decades, a number of ruthenium-based catalysts have
been prepared, but only a few of them are capable of oxidizing water to dioxygen in
homogeneous system. Very recently, our group designed and synthesized a series of
ruthenium complexes with biscarboxylate ligand, which exhibited high efficiency in catalytic
water oxidation. Further research of these ruthenium complexes showed that the introduction
of carboxylic groups promoted the water oxidation process. In order to increase the stability
and efficiency of such ruthenium catalysts, we prepared a series of novel ruthenium
complexes Ru(II)(ptda)(L)2 (ptda = 1,10-phenanthroline-2,9-dicarboxylic acid, L = pyridine
1; 4-methylpyridine 2; 4-bromopyridine 3) showed in figure 1. The catalytic properties of
these ruthenium complexes towards water oxidation will be presented during the conference.
Br
N N N
N N N N N N
O Ru O O Ru O O Ru O
O O O O O O
Br
1 2 3
Figure 1. Molecular structures of Ru complexes 1-3 as catalysts for water oxidation.
References
[1] Y. Xu, T. Åkermark, V. Gyollai, D. Zou, L. Eriksson, L. Duan, R. Zhang, B. Åkermark, L. Sun, Inorg.
Chem. 2009, 48, 2717-2719.
[2] I. Romero, M. Rodríguez, C. Sens, J. Mola, M. Kollipara, L Francas, E Mas-Marza, A. Llobet, Inorg. Chem.
2009, 47, 1824-1834.
[3] J. L. Cape, J. K. Hurst, J. Am. Chem. Soc. 2008, 130, 827
[4] L. Sun, B. Åkermark, S. Ott, Coord. Chem. Rev. 2005, 249, 1653-1663.
218
P-139
Entatiomerically pure chlorohydrins can be prepared via Dynamic Kinetic Resolution (DKR)
by employing ruthenium catalyst 1 for in situ racemization and Pseudomonas cepacia lipase
for kinetic resolution [1]. Optically active chlorohydrins are versatile intermediates and can be
used as direct precursors in the synthesis of epoxides, β-aminoalcohols, pyrrolidines and
functionalized cyclopropanes. Therefore this is an efficient route for the preparation of a
variety of enantiomerically enriched compounds.
The DKR developed for this system is applicable on a variety of different β-chloro-aryl-
alcohols with both electron-withdrawing and electron-donating groups. Conversions of up to
99% and ee up to >99 % were obtained. A few of the enantiomerically enriched chlorohydrins
were transformed to the corresponding epoxides with high isolated yield. The ee was retained
during the ring closure.
Scheme 1. Preparation of enantiomerically pure chloroacetates via dynamic kinetic resolution and further ring
closure to the corresponding epoxides.
References
[1] Träff A., Bogár K., Warner M., Bäckvall J-E, Org. Lett., 2008, 10, 4807-4810
219
P-140
Alexey A. Tsyganenko
V.A. Fock Institute of Physics, St. Petersburg State University, St.Petersburg, 198504 Russia,
e-mail: tsyg@photonics.phys.spbu.ru
The paper deals with the advances in FTIR spectroscopic studies of two phenomena, which
should be common for homogeneous and heterogeneous catalysis. These are acidity and
basicity induced by adsorption and linkage isomerism of surface species.
The strength of sites depends dramatically on surface coverage due to lateral interactions
between adsorbed molecules1, whose mechanism includes surface relaxation induced by
adsorption. Co-adsorption of weak acids with basic molecules demonstrates the effect of
induced Bronsted acidity2, when in the presence of SO2, NO2, etc., protonation of such bases
as NH3, pyridine or 2,5-dimethylpyridine (DMP) occurs on silanol groups that never manifest
any Bronsted acidity. The effect suggests a new explanation of promotive action of some
gases in the reactions catalyzed by Bronsted sites3. Induced basicity in the presence of
adsorbed bases was detected4 by means of weak CH proton-donating molecules such as CHF3
or HCN as a test for the strength of surface electron-donating sites. Induced Lewis acidity was
also established, and accounts for superacidic properties of sulfided oxides.
It is obviously adopted that a simple test molecule forms with a surface site only one complex
with energetically most favorable geometry. Recently it was shown, however, that even
diatomics such as CO reveal linkage isomerism and form with the cations or OH-groups,
besides the usual C-bonded complex with the frequency shifted to higher wavenumbers, the
energetically unfavorable O-bonded one with lowered frequency with respect to the gas
phase5. The latter coexists in the thermodynamic equilibrium with the C-bonded form and has
negligible concentrations at liquid nitrogen temperature. Having the energy considerably
higher, this form of adsorption can be considered as some “sterically activated” state, which
can play a role of intermediate in catalytic reactions6. Surface isomeric states were established
for some other adsorbed species, such as cyanide ion CN- produced by HCN dissociation.
The existence of linkage isomerism can be explained by a simple electrostatic model, which
takes into account the interaction of molecular quadrupole with the cations7. Besides linear
configurations with positive sites, the model predicts side-on complexes of CO and N2 with
surface anions, in agreement with a lot of experimental results8. Interaction of CO with the
most basic oxygen sites of oxides leads finally to the formation of ‘carbonite’ CO22- ion, an
ultimate case of side- on interaction with surface oxygen ion. Theory predict a correlation
between the frequency shifts on adsorption and the integrated absorption coefficients. Recent
data on CO adsorption on ionic surfaces are in a fair agreement with the theory9.
References:
1. A.A.Tsyganenko, L.A.Denisenko, S.M.Zverev, V.N.Filimonov. J.Catal., 94, 10-15 (1985).
2. A.A.Tsyganenko et al. Catal. Letters, 70, 159-163 (2000).
3. A.Travert et al. J. Phys. Chem. B, 106, 1350-1362 (2002).
4. Storozheva E.N., Sekushin V.N., Tsyganenko A.A. Catal. Letters. 107, 185-188 (2006).
5. C.Otero Areán et al. Intern. J.Mol.Sci., 3, 764-776 (2002).
6. A.A.Tsyganenko, P.Yu.Storozhev, C. Otero Areán. Kinet. Catalysis, 45, 530-540 (2004).
7. P.Yu.Storozhev et al. Appl. Surface Sci., 238, 390-394 (2004).
8. A.A.Tsyganenko et al. J. Mater. Chem., 16, 2358-2363 (2006).
9. E.V.Kondratieva, O.V.Manoilova, A.A.Tsyganenko. Kinet. Catalysis. 49, 451-456 (2008).
220
P-141
Hydrogen cyanide is one of the most toxic environmental pollutants. There are many natural
and anthropogenic sources of this compound, which can be released into the atmosphere. Its
removal from the environment is of a special significance.1 Industrial ways of cyanide
destruction generally involve chemical treatment using various oxidation agents. Biological
means of cyanide treatment have also been adopted using enzymes as detoxification agents.2
Here we report the FTIR spectroscopic results on the photooxidation of hydrogen cyanide in
pure HCN and in mixed HCN/H2O icy films at 77 K. These condensed systems can be
considered as a model for comparative investigation of the HCN oxidation process in
different systems, such as aqueous solution, atmospheric gases, heterogeneous catalytic
systems, biological systems, etc. Our results are useful for understanding the HCN oxidation
processes taking place in homogeneous and heterogeneous systems like waste waters, soil,
and atmospheric ice particles and aerosols.
The cell for spectral studies of adsorbed molecules at variable temperatures (55-370 K) was
equipped with a device for vapour sputtering from the heated capillaries and deposition onto
the inner BaF2 windows precooled by liquid nitrogen.3 Ozone was used as an oxidation agent.
The systems under investigation were irradiated by a 120-W high-pressure mercury lamp
DRK-120 (MELZ). The HCN/H2O ices with different component ratio were tested by low-
temperature adsorption of CO.3
Irradiation of pure HCN film in the presence of ozone at 77 K leads to the formation of
isocyanic acid HNCO as an intermediate product and CO2 and NOx as the final products. The
products were identified on the basis of isotopic studies. The obtained spectral dependence of
photo-ozonolysis of HCN at low temperature has shown that photoexcitation or
photodissociation of ozone, evidently accounts for the observed processes.
In order to investigate the influence of the water addition upon the reaction mechanism, the
photo-ozonolysis of hydrogen cyanide in mixed HCN/H2O ices with different water content at
77 K was carried out. It was found that water induces the dissociative ionization of HNCO
and formation of the cyanate ion OCN−. The reaction rate increaces due to the formation of
cyanic acid (HOCN). Therefore, water acts as a catalyst of the HNCOςHOCN isomerization
process even at low temperature. Our results on the HCN oxidation in such condensed
systems are compared with those for aqueous solution and biological systems.
References:
1. L. E. Towill et al., Reviews of the Environmental Effects of Pollutants. V. Cyanide. U. S. Environ. Prot.
Agen.pub. no. 600/1-78-027, Washington, D. C. (1978).
2. T. I. Mudder, J. L Whitlock, Miner. Metallurg. Proc., 161-165 (1984); C. S. Wang et al., Appl. Environ.
Microbiol., 62, 2195-2197 (1996).
3. A. V. Rudakova et al., Langmuir, 25 (3), 1482-1487 (2009).
221
P-142
Directive carbon-carbon bond forming reactions via direct functionalization of C-H bonds by
homogeneous transition metal complex catalysts, namely low-valent ruthenium complex
catalysts, is of great importance because of their synthetic applications.1 On the other hand,
heterogeneous catalysts, especially solid metal oxide-supported ones, are obviously
advantageous from the practical and environmental viewpoints.2 Here, we are going to report
the first example of the selective addition of aromatic ketones to alkenes via the activation of
aromatic C-H bonds promoted by ceria- or zirconia-supported ruthenium oxide catalysts.
Supported Ru catalysts were prepared by the impregnation method. CeO2 or ZrO2 prepared by
the treatment of cerium(III) nitrate or zirconium oxynitrate with aqueous ammonia was added
to a solution of Ru3(CO)12 in THF under air at room temperature. After impregnation, powder
was calcined at 400 oC for 30 min to afford Ru/CeO2 and Ru/ZrO2 catalyst. Catalytic
reactions were performed in a glass Schlenk tube under an argon atmosphere by using a hot
stirrer equipped with a cooling block for refluxing the solution. The products were identified
by the use of GC-MS and NMR.
The Ru/CeO2 and Ru/ZrO2 catalysts did show excellent activity towards the addition of an
aromatic C-H bond to vinylsilanes. For example, the addition of α-tetralone (1a, 1.0 mmol) to
triethoxyvinylsilane (2a, 2.0 mmol) smoothly proceeded at 170 oC for 24 h in the presence of
Ru/CeO2 or Ru/ZrO2 (0.025 mmol as Ru) together with triphenylphosphine (0.10 mmol) to
afford the adduct 3a in 99% yield (eq. 1). The addition of a small amount of phosphine was
indispensable. Remarkably, the reaction in the absence of the solvent smoothly proceeded to
achieve high TON over 800. Various simple aromatic ketones and heterocyclic ketones were
applicable to the reaction with triethoxyvinylsilane 2a to afford the desired products in
moderate to high yields.
Note that silica-, alumina-, titania-, or magnesia-supported Ru catalysts prepared by the same
method as Ru/CeO2 and Ru/ZrO2 did not give the desired adducts at all. The reaction of 1a
and 2a was stopped by the hot filtration of bulk of the solid Ru/CeO2 catalyst after the
reaction for 3 h, indicating that the reaction was operated on the surface of the solid catalyst.
Effects of pretreatment of the catalysts will be also disclosed.
References: 1. S. Murai, F. Kakiuchi, S. Sekine, Y. Tanaka, A. Kamatani, M. Sonoda, and N.
Chatani, Nature 366, 529 (1993). 2. P. T. Anastas and J. Warner, in Green Chemistry: Theory
and Practice; Oxford University Press: New York (1998).
222
P-143
Jeroen Wassenaar, Ronald Lindner, Bart van den Bosch, Joost N.H. Reek,
Jarl Ivar van der Vlugt*
*Laboratory for Homogeneous & Supramolecular Catalysis, van ‘t Hoff Institute for Molecular Sciences,
University of Amsterdam, Nieuwe Achtergracht 166, 1018 WV Amsterdam, the Netherlands
e-mail: j.i.vandervlugt@uva.nl
The design of dedicated polydentate, privileged ligand architectures for the use in
homogeneous catalysis is a continuous process of chemical creativity.1 Various
methodologies will be presented in this poster presentation, aimed at underscoring some of
the ongoing research in our laboratories in this area. We will detail results on the application
of indole as a basic building block for the formation of chiral, hybrid phosphine-
phosphoramidite scaffolds, which have found application in inter alia the asymmetric
hydrogenation of Roche ester derivatives,2 sterically encumbered tripodal, tetradentate all-
phosphorus entities3 or neutral tridentate pseudo-pincer frameworks. Details on the
coordination chemistry and preliminary results concerning the reactivity of these species will
be included.
Recent results on the chemistry and application of non-innocent pincer systems will be
discussed, mainly with relation to the reactivity of first-row transition metal species.4
Furthermore, ongoing efforts to develop novel hybrid tridentate ligands and their metal
complexes (Rh, Ir) will be enclosed, aiming for enhanced adaptability toward unactivated
substrates.5
References
1
a) D. Morales-Morales, C.M. Jensen, The Chemistry of Pincer Compounds, 2007, Elsevier; b) J.I. van der
Vlugt, J.N.H. Reek, submitted.
2
a) J. Wassenaar, S. van Zutphen, G. Mora, P. Le Floch, M. Siegler, A.L. Spek, J.N.H. Reek, Organometallics
2009, in press; b) J. Wassenaar, M. Kuil, J.N.H. Reek, Adv. Synth. Catal. 2008, 350, 1610-1614; c) J. Wassenaar,
J.N.H. Reek, Dalton Trans. 2007, 3750-3753.
3
J. Wassenaar, M. Siegler, B. de Bruin, A.L. Spek, J.N.H. Reek, J.I. van der Vlugt, submitted.
4
a) J.I. van der Vlugt, E.A. Pidko, D. Vogt, M. Lutz, A.L. Spek, submitted; b) J.I. van der Vlugt, M. Lutz, E.A.
Pidko, D. Vogt, A.L. Spek, Dalton Trans. 2009, 1016-1023; c) J.I. van der Vlugt, E.A. Pidko, D. Vogt, M. Lutz,
A.L. Spek, A. Meetsma, Inorg. Chem. 2008, 47, 4442-4444.
5
R. Lindner, B. van den Bosch, J.N.H. Reek, J.I. van der Vlugt, in preparation.
223
P-144
Hydrogen production by steam reforming has been extended from methane to much more
heavier feedstock such as natural gas, gasoline and diesel, as well as bioliquids in the past
years. Nickel is the preferred SMR catalyst because of its cost and availability; however, it is
susceptible to deactivation via carbon formation. Thus, the design of new SMR catalysts that
are inexpensive but resistant to deactivation is of particular interest [1]. To aid in this search
for improved catalysts, we seek an improved understanding of the processes occurring on the
catalyst surface.
DFT calculation indicate surface alloying such as Ag can increase the energy barrier of the
surface reaction steps towards surface carbon formation, thus suppress also the filamentous
carbon formation. In present work, a series of hydrotalcite-based Ni catalysts modified by
different Ag loadings were prepared by surface redox reaction between the reduced Ni and
AgNO3. The catalysts were characterized by many different techniques such as TPR, XRD,
TEM and XPS. The effect of Ag surface alloying on the activity, kinetics and carbon
formation of Ni catalysts was studied by using methane steam reforming as probe reaction.
The relationships between Ag loadings and methane conversion, turnover frequency,
activation energy, and coke formation were obtained, which will be discussed based on DFT
calculation. It can be concluded that adding a small amount of Ag on the hydrotalcite-based
Ni catalyst can strongly suppress the carbon formation, while turnover frequency is deceased
and the activation energy is increased. The results of this study are helpful for the design of a
high performance catalyst for methane steam reforming.
References
1. Rostrup-Nielsen, J.R., J. Sehested, and J.K. Nskov, Advances in Catalysis. 2002, Academic Press. p. 65-
139.
Fig.1 Effect of Ag loading on turnover frequency under the condition of molar steam Fig.2 Effect of Ag loading on carbon formation for methane steam
to methane ratio of 3.5 and molar CH4 to H2 ratio of 1.0 reforming at 700oC and molar steam to methane ratio of 0.5
7
1
6
Carbon formation rate(mgcarbon/(h.mgcat))
Ni
5Ag95Ni 0.8
5 25Ag75Ni
TOF(1/s)
4 0.6
3
0.4
2
1 0.2
0
500 525 550 575 0
0 5 10 15 20 25
Reaction temperature(oC) Ag loading (% )
224
P-145
Ruthenium catalyst 1 has successfully been used as an efficient racemization catalyst for
secondary alcohols at room temperature. The combination of catalyst 1 with an enzyme and
an acyl donor can be used to transform racemic alcohols to enantiomerically pure (R)-acetates
in high yields and with excellent ee values via dynamic kinetic resolution (DKR) [1].
However, in connection with research on 1,4-diols, it was found that the racemization of 5-
hydroxy-1-hexene is considerably slowed down and therefore DKR of this unsaturated
alcohol has not yet been successful. Inhibition of the racemization could be due to
coordination of the double bond to ruthenium. The reaction of (η5-Ph5Cp)Ru(CO)2(Ot-Bu) 2
and 5-hydroxy-1-hexene has therefore been thoroughly studied by NMR spectroscopy and in
situ IR spectroscopy (Scheme 1). These experiments have provided evidence for the
formation of two diastereomers of an alkoxycarbonyl complex in which the terminal double
bond is coordinated to ruthenium (3a-b, Scheme 1). 1H NMR and 13C NMR show shifts
upfield for the double bond protons which is in accordance with literature values upon
coordination to ruthenium [2, 3]. The carbonyl peaks of the complexes appear at δ 203.50,
203.56 and 204.0 ppm, in a ratio of 1 : 1 : 2. IR peaks were detected at 1982 (CO) and 1644
(acyl) cm-1.
References
[1] Martín-Matute, B.; Edin, M.; Bogár, K.; Bäckvall, J.-E. Angew. Chem. Int. Ed. 2004, 43, 6535-6539.
[2] McWilliams, K. M.; Angelici, R. J. Organometallics 2007, 26, 5111-5118.
[3] Alvarez, P.; Lastra, E.; Gimeno, J.; Brana, P.; Sordo, J. A.; Gomez, J.; Falvello, L. R.; Bassetti, M.
Organometallics 2004, 23, 2956-2966.
225
P-146
Supported Ionic Liquid Phase (SILP) catalysts are novel materials consisting of an ionic
liquid, metal catalyst and a porous support.[1] The support is covered with a thin film of ionic
liquid and the homogeneous or heterogeneous catalyst is dissolved in this ionic liquid film.
The ionic liquid stabilizes the homogeneous catalyst and enables easy product separation and
catalyst recycling. Therefore the SILP-catalysis concept combines the advantages of
homogeneous and heterogeneous catalysis.
In recent years SILP catalyst systems have been successfully applied in gas phase and liquid
phase reactions.[2] The use of SILP-systems in gas phase reactions is up to now only realized
for reactions with simple selectivity properties (e.g. hydroformylation, methanol
carbonylation and hydrogenation).
In order to expand the field of SILP - applications in gas phase on reactions with complex
selectivity behaviour this contribution presents a successful experimental concept from liquid
systems to gas phase reaction[3,4] and reports the first successful SILP-catalyzed asymmetric
hydrogenation in the gas phase.[5] The studies focus on the asymmetric hydrogenation of a β-
keto ester to a β-hydroxy ester - structive motif for a number of important active agents.
For the first time a SILP catalyst was designed and successfully applied for the asymmetric
hydrogenation in a continuous gas phase process with high activities and enantioselectivities.
The reaction in gas phase offers a solvent-free experimental concept and the easy
immobilisation and recycling of expensive homogeneous chiral catalyst complexes. This
study may help to improve reaction systems and to design green processes for the
pharmaceutical, the nutrition and the fine chemical industries.
_______________________________________________
[1]
C. P. Mehnert, R. A. Cook, N. C. Dispenziere, M. Afeworki, J. Am. Chem. Soc. 2002, 124, 12932-12933.
[2]
Y. Gu, G. Li, Adv. Synth. Catal. 2009, 351, 817 - 847.
[3]
E. Oechsner, B. Etzold, K. Junge, M. Beller, P. Wasserscheid, Adv. Synth. Catal. 2009, 351, 235 – 245.
[4]
E. Oechsner, K. Schneiders, K. Junge, M. Beller, P. Wasserscheid, Applied Catalysis A: General, submitted.
[5]
E. Oechsner, M. Haumann, P. Wasserscheid, patent, in registration.
226
P-147
Layered double hydroxides, available as minerals or from synthesis, and known as anionic
clays, are very versatile. Hydrotalcite (HTC) is an anionic clay from this family, based on Mg
and Al cations, but a wide range of compositions with general formula (M2+ = Mg2+, Zn2+,
Ni2+ etc., M3+ = Al3+, Cr3+, Ga3+ etc) is possible.[1] A rich intercalation chemistry can be
obtained not only from the anion exchange process, but also from substitution of the di–and
trivalent cations in the layers. In the present work two enantiopure amino-acids, tryptophan
(trpH) and phenylalanine (pheH) were intercalated inside the interlayer spacing of the clay by
the reconstruction method. Subsequent introduction of an Mo-based organometallic core was
accomplished by using the precursor complex [MoI2(CO)3(NCMe)2]. For comparison
purposes the equivalent homogeneous phase complexes were also prepared yielding
complexes formulated as [MoI2(CO)3(L^L)] (L^L = trpH or pheH). Both the composite
materials and the complexes were afterwards characterized by FTIR, powder XRD, among
other techniques to confirm the successful intercalation of the hosts. All the Mo containing
species were then tested in the enantiosselective catalytic epoxidation of olefins both in
homogeneous (complexes) and heterogeneous (clays) phases. This is an important reaction as
epoxides are relevant starting materials in industrial applications.
Results show that conversions range between 70 through 90% for cy8 and 60 through 85% for
sty. Further results will be discussed in terms of yields, kinetics and enantiosselectivity.
Comparison with similar catalytic systems, based on pyridine ligands, show that the
conversions are somewhat similar for the same [MoI2(CO)3] core. An in-depth and more
detailed comparison is to be presented at the meeting.
Acknowledgements
The authors are grateful to PIDDAC and FCT for financial support (PTDC/QUI/71576/2006).
References
[1] Newman, S.P., Williams, S.J., Coveney, P.V., Jones, W., J. Phys. Chem. B, 102 (1998), 6710-6719.
227
P-148
N-Heterocyclic carbenes (NHCs) are rapidly becoming a versatile and efficient alternative to
traditional phosphine-based ligands in organometallic chemistry1. The steric properties of the
N-substituents have been reported to have a significant effect on the activity of the metal-
NHC catalyst, with bulky substituents usually increasing activity2. Although numerous
examples of immobilised NHC complexes can be found in the literature, most seem to
employ sterically undemanding alkyl-substituted NHCs3.
A range of NHC complexes of palladium have been immobilised on silica and their
application in cross-coupling reactions has been investigated. N-substituted imidazoles (N-
methyl, N-benzyl, N-mesityl and N-(diisopropyl)phenyl) were reacted with 3-
(bromopropyl)trimethoxysilane to produce imidazolium salts (1). Deprotonation with Ag2O
generates silver NHC which were used as transfer agents with Pd(PhCN)2Cl2 to yield bis-
(NHC) palladium dichloride complexes (2). These could be tethered to silica gel yielding the
precatalysts (3) (figure 1). The palladium complexes were characterised by high-resolution
mass spectrometry and 1H and 13C NMR. NMR analysis indicated the presence of rotameric
isomers4. Preparing the precatalyst prior to immobilisation was thought to be the best route to
create well defined silica supported catalysts.
(MeO)3Si
Si(OMe)3
1) Ag2O Cl N Cl N
N N SiO 2
- + Pd
Br N Pd
N N N N
2) Pd(PhCN)2Cl2 Cl
N Cl
(3)
Si(OMe)3
(1) (2)
The resulting silica-supported bis-NHC Pd complexes are stable to air and moisture and have
been prepared using a relatively 'green' process. These catalysts show good activity in Suzuki
reactions of aryl iodides and bromides (>99% conversion using our conditions), however only
modest conversions (<50%) were obtained for couplings employing aryl chlorides. The
catalysts also show moderate activity in Sonogashira and Heck cross coupling reactions and
have the potential for recyclability. Notably the catalysts bearing NHCs with bulky N-mesityl
and N-(diisopropyl)phenyl substituents as ligands show superior activity in all reactions.
___________________________________________
1 Fremont, P.; Marion, N; Nolan, S. Coord. Chem. Rev. (2009) 862-892.
2 Kantchev, E.; O’Brien, C.; Organ, M. Agnew. Chem. Int. Ed. (2007) 2768-2813.
3 Sommer, J.; Weck, M. Coord. Chem. Rev. 251 (2007), 860-873.
4 Vin Huynh, H.; Wu, J. J. Organomet. Chem. (2009) 323-331.
228
P-149
Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, 100190 Beijing, China
Si(OCH3)3
Ph2
P Cl N Electrospinning O
O OH OH
Fiber/Particle-Supported
Ru + MeSi(OMe)3/Polymer Heterogeneous Catalysts
H2
P Cl N + +
Ph2 Cat.
Scheme 1. The preparation of fiber/particle supported catalysts. Scheme 2. The hydrogenation of α,β-Unsaturated ketone
229
P-150
α,β-Alkynyl ketones appear in many biologically active molecules and play crucial roles as
intermediates in the synthesis of natural products and druglike molecules. Traditionally, α,β-
alkynyl ketones are generally synthesized via the coupling of alkynyl organometallic reagents
with acid chlorides[1], traditional methods have employed Pd- and (or) Cu-catalyzed coupling
reactions of acid halides and terminal alkynes. However, these methods have to be handled in
dry solvents under an inert atmosphere. An alternative synthesis method for α,β-alkynyl
ketones is the transition metal-catalyzed coupling of organic halides with terminal alkynes in
the presence of carbon monoxide[2], however, Pd-phosphine complexes are often used in the
carbonylative sonogashira coupling reaction under homogeneous conditions. As a part of our
ongoing efforts to develop efficient heterogeneous catalytic systems for the important
reaction[3,4]. In this work, we had preapred a highly cross-linked polymer-supported ionic
liquid (PSIL) by copolymerization of 3-butyl-1-vinylimidazolium iodide ([VBIM]I) with the
cross-linker divinylbenzene (DVB). Using PSIL as support, a novel immobilization of
Pd(OAc)2 on PSIL (Pd/PSIL) catalyst has readily formed and the average particle diameter
was found to be about 20 nm (Fig. 1 and 2). The heterogeneous cross-linked polymer
supported Pd was demonstrated to be an efficient catalyst for the carbonylative-Sonogashira
coupling reaction of aryl iodides with terminal alkynes under phosphine-free condotions
(Scheme 1), giving the corresponding α,β-alkynyl ketones in good to excellent yields (48%-
98%). Moreover, the immobilized heterogenous catalysts can be recycled 5 times with no
significant loss of the catalytic activity in the carbonylative-Sonogashira coupling reaction of
iodobenzene with phenylacetylene (run1: yield 90%, run2: yield 90 %, run3: yield 87%, run4:
yield 85%, run5: yield 84%).
References
[1] C. Chowdhury, N.G. Kundu, Tetrahedron, 1999, 55, 7011. [2] T. Fukuyama, R. Yamaura, I. Ryu, Can. J.
Chem, 2005, 83, 711. [3] J. H. Liu, J. Chen, C. G. Xia, J. Catal., 2008, 253, 50. [4] J. M. Liu, X. G. Peng, W.
Sun, Y. W. Zhao, C. G. Xia, Org. Lett., 2008, 10, 3933.
230
P-151
Yunhua Xu,a Lele Duan,a Lianpeng Tong,a Björn Åkermarkb and Licheng Sun a,*
a
Department of Chemistry, School of Chemical Science and Engineering, Royal Institute of Technology (KTH),
10044 Stockholm, Sweden,
b
Department of Organic Chemistry, Arrhenius laboratory, Stockholm University, 106 91 Stockholm, Sweden,
Email: lichengs@kth.
Inspired by the function of the oxygen-evolution center in Photosystem II, a few ruthenium-
based complexes have been synthesized and shown to be efficient catalysts for water
oxidation.1-4 Among them, however, only very few can drive this reaction with light.2,5
Recently we reported a dinuclear ruthenium complex containing a negatively charged ligand
(see structure below) as an efficient catalyst for water oxidation in the presence of
Ce(NH4)2(NO3)6 as chemical oxidant.6 In this presentation, we will present the catalytic
activities of this complex toward light-driven water oxidation in the presence of Co(NH3)5Cl3
or Na2S2O8 as electron acceptor. Several ruthenium trisbipyridine derivatives that have
different oxidation potentials were prepared and used as photosensitizers. Oxygen evolution
was investigated by both Clark-type oxygen electrode and gas chromatography (GC).
N
N O
Ru O
N N
N N N N
O Ru
O N
PF6
N
2H2O O2
photosensitizer
electron acceptor
light
References:
1. F. Liu, J.J. Concepcion, J.W. Jurss, T. Cardolaccia, J.L. Templeton, T. J. Meyer, Inorg. Chem. 2008, 47,
1727–1752;
2. P. Comte, M.K. Nazeeruddin, F.R. Rotzinger, A.J. Frank, M. Grätzel, J. Mol. Catal. 1989, 52, 63-84;
3. X. Sara, I. Romero, M. Rodriguez, L. Escriche, A. Llobet, Angew. Chem. Int. Ed. 2009, 48, 2842–2852;
4. Z. Deng, H.-W. Tseng, R. Zong, D. Wang, R. Thummel, Inorg. Chem. 2008, 47, 1835–1848;
5. J.L. Cape, J.K. Hurst, J. Am. Chem. Soc. 2008, 130, 827–829;
6. Y. Xu, T. Åkermark, V. Gyollai, D. Zou, L. Eriksson, L. Duan, R. Zhang, B. Åkermark, L. Sun, Inorg.
Chem. 2009, 48, 2717-2719.
231
P-152
Sodalite nanozeolite was successfully synthesized via hydrothermal method [1] with extracted
silica source from rice husk ash. synthesized zeolite was characterized by XRF, XRD, SEM,
EDX, FT-IR and BET. The XRF analysis results of extracted silica powder from rice husk ash
by a suitable alkali solution was: LOI: 10.64, SiO2:87.988, Al2O3:0.477, Na2O:0.566 (wt%).
According to XRD analysis, the extracted silica powder was amorphous (Fig 1a). The effect
of crystallization time was investigated on the final product properties (Figs. 1bI, II, III).
sodalite nanocrystal with crystal sizes ranging from 30 to 60 nm was synthesized at 60 °C and
aging of 5 h, without adding any organic additives, while paying attention to the key factors
for the synthesis of nanosized zeolite crystals [2, 3]. Figs. 3a and b indicate SEM images of
the final products. The Si/Al and Na2O/SiO2 ratios of final products were 1.61 and 0.18,
respectively. The results of BET analysis show that the specific surface area and external
surface area of sodalite nanozeolite were to be 108.73 m2g-1 and 72.162 m2g-1, respectively.
(b)
(a)
Figure 1. (a) the XRD analysis of extracted silica powder (b) XRD patterns of Sodalite after (I) 1, (II) 2 and (III) 5 hours
(a) (b)
Figure 3. SEM images of prepared nanozeolite Sodalite after (a) 2 and (b) 5 hours
[1] W. Fan, K. Morozumi, R. Kimura, T. Yokoi, T. Okubo, Synthesis of Nanometer-Sized Sodalite Without
Adding Organic Additives, Langmuir 24 (2008) 6952-6958.
[2] Y. Hu, C. Liu, Y. Zhang, N. Ren, Y. Tang, Microwave-assisted hydrothermal synthesis of nanozeolites
with controllable size, Microporous and Mesoporous Materials 119 (2009) 306-314.
[3] I. Schmidt, C. Madsen, C.J.H. Jacobsen, Confined Space Synthesis. A Novel Route to Nanosized Zeolites,
Inorganic Chemistry 39 (2000) 2279-2283.
232
P-153
a
State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences,
Dalian 116023, China
b
Schuit Institute of Catalysis, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands
Renewable and abundant biomass-derived carbohydrates are important alternatives, not only for the
sustainable supply of liquid fuels but also for valuable chemical intermediates. Among the many
possible biomass-derived chemicals, 5-hydroxymethylfurfural (HMF) is a renewable platform for the
production of fuels and fine chemicals. Therefore, preparation of HMF through the acid catalyzed
dehydration reactions of sugars (Scheme 1) is one of the promising approaches to transform
carbohydrates into useful chemicals1.
Heteropoly acids (HPAs) have attracted considerable attention as acid catalysts for the clean synthesis
of fine and specialty chemicals2. As far as the industrial production is concerned, the development of a
heterogeneous system for sugar dehydrations has advantages over current approaches, such as ease of
catalyst recovery, absence of corrosive mineral acids and continuous operation3.
In this part of work, as shown in Scheme 2 and Figure 1, we will present the production of HMF from
fructose using mesoporous silica-supported heteropoly acids as catalyst in both DMSO and ionic
liquid solvents.
Scheme 2. Fructose dehydration reactions based on the mesoporous Figure 1. Yields of HMF from fructose
silica supported heteropoly acid catalyst. by acids catalyzed dehydration
reactions in DMSO at 140 oC.
References:
1. Y. R. Leshkov, J. A. Dumesic, et al., Science, 2006, 312, 1933-1937.
2. K. A. D. Rocha, E. V. Gusevskaya, et al., Appl. Catal. A: General, 2009. 352(1-2), 188-192.
3. X. H. Qi, M. Watanabe, et al., Green Chem., 2008, 10, 799–805.
233
P-154
Daliang Zhang1, Junliang Sun1, Yu Han2, Leng Leng Chng2, Lan Zhao2, Jackie Y. Ying2
and Xiaodong Zou1*
1
Structural Chemistry and Berzelii Center EXSELENT on Porous Materials, Stockholm University, SE-106 91,
Stockholm, Sweden
2
Institute of Bioengineering and Nanotechnology, 31 Biopolis Way, The Nanos, 138669 Singapore
Novel ordered porous materials with unique pore structures and pore sizes in the mesoporous
range (2 – 50 nm) have attracted great scientific and industrial interest due to their appealing
structures and potential applications in separation, purification, catalysis, devices etc. Until
now, various mesoporous materials with distinct pore structures have been discovered such as
one dimensional (1D) lamellar, two dimensional (2D) hexagonal, cage-type and bi-continuous
pore structures. Bi-continuous mesoporous silica materials are characterized by two
interwoven but disconnected mesoporous channels, which are separated by a single
continuous silicate wall following triply periodic minimal surfaces (TPMS). However, more
complex structures corresponding to tri- or multi-continuous TPMS was still undiscovered.
Recently we reported a three dimensional (3D) hexagonal mesoporous silica, IBN-9, with a
tri-continuous pore structure consists of three identical continuous interpenetrating channels.
This most complex pore structure amongst all reported mesoporous materials was solved by
3D reconstruction of transmission electron microscopy images taken along different
orientations. [1]
IBN-9 was synthesized by using a specially designed cationic surfactant template based on
the co-assembly of organic surfactant molecules and inorganic silicate species in aqueous
solutions. The unit cell was determined to be hexagonal from a tilting series of high-
resolution transmission electron microscopy (HRTEM) images. A 3D electrostatic potential
map was reconstructed by combining the HRTEM images along different directions. The pore
structure is characterized by a series of zig-zag channels in parallel to the c axis. The zigzag
channels are further connected by ‘ternate channels’ perpendicular to the c axis. The crystals
of IBN-9 show well-defined fibre morphology, in which the zig-zag channels and ‘ternate
channels’ are ultra-long and ultra-short, respectively. This might be particularly useful for
separation and controlled release applications by offering distinct diffusion rates in different
directions. The pore structure of IBN-9 is found as the first representation of the three-fold
interwoven 3etc(187) net in a real material which has only be predicted mathematically
before.
Two other mesophases IBN-6 (bi-continuous phase) and IBN-10 (2D hexagonal phase) were
synthesized using the same surfactant by modifying the conditions for the synthesis of IBN-9.
We analyzed the surface mean curvatures of the three different mesophases base on
experimental electrostatic potential maps. The average mean curvature increases from the
cubic IBN-6 to the 3D hexagonal IBN-9 and to the 2D hexagonal IBN-10 which shows IBN-9
is an intermediate phase between the bi-continuous phase and the 2D hexagonal phase.
Reference:
1. Y. Han, D. Zhang, L.L. Chng, J. Sun, L. Zhao, X. Zou, J.Y. Ying “A tri-continuous mesoporous material with
a silica pore wall following a hexagonal minimal surface” Nature Chemistry 1, 123 – 127 (2009).
234