Professional Documents
Culture Documents
Nitomortar 30
Nitomortar 30
constructive solutions
Properties
Curing characteristics at 300C Nitomortar 30 Pot life Initial hardness : : : 30 min. 16 hrs 7 days
Advantages
Chemical Resistance :Unaffected by wide range of acids, alkalis and industrial chemicals Easily applied :Designed for easy application to a fair finish Quality : Pre-weighed quality controlled materials ensure consistency and reduce risk of site errors Proven performance : Successful use proves for a wide variety of aggressive applications
Full cure
Mechanical characteristics @ full cure Compressive strength Flexural strength Tensile strength Bond strength to concrete Nitoprime 25 Pot life Maximum overlay time : : 30 min. @ 300C 30 min. @ 300C : : : : 45 N/mm2 12 N/mm2 4.5 N/mm2 3.0 N/mm2
Description
Nitomortar 30 is a three part solvent free combination of epoxy resin, modified amine hardeners filled with specially graded chemically inert aggregates with high crushing strength. It is applied by trowel as a durable chemical resistant repair mortar 3-6 mm thick depending upon the requirement. The system includes Nitoprime 25 a two part epoxy resin primer and Nitomortar 30 which are both supplied in preweighed units ready for onsite mixing and application. The finished area has a slightly granular texture of uniform self colour. However, as the natural grade takes its colour from the aggregates which is subjected to variation, colour matching is not practicable with this grade.
Chemical Resistance
Acids Hydrochloric 10% Sulphuric 10% Phosphoric 30% Nitric 10% Lactic 10% Citric 10% Alkalis Sodium Hydroxide 30% Ammonia 10% Organic Solvents Butanol White Spirit Oil/Grease/Petrol Xylene Acetone Skydrol Excellent Excellent Excellent Good Excellent Excellent Excellent Excellent Good Excellent Excellent Good Not resistant Good
Technical Support
Fosroc offers a technical support package to specifiers, end users and contractors as well as onsite technical assistance all over the country.
Sat. Sugar
Nitomortar 30
Excellent
Excellent Excellent
Nitomortar 30
Those materials marked 'Good' are suitable for areas of occasional spillage where good housekeeping is in force. All the above properties have been determined by laboratory controlled tests and are typical of those expected in practice.
Storage
Nitoprime 25 and Nitomortar 30 have a shelf life of 12 months if stored in unopened containers below 350C.
Additional information
Fosroc manufactures a wide range of products specially designed for the repair and refurbishment of damaged reinforced concrete. This includes hand placed and spray grade repair mortars, fluid microconcretes, chemical resistant epoxy mortars and a comprehensive package of protective coatings. In addition, a wide range of complementary products are available.
Estimating
Packaging and Coverage Pack size Approx. Coverage rate 5.5 - 6.5 m2/Ltr. 2.67m2 @ 3mm thickness/pack 1.33m2 @ 6mm thickness/pack
Nitoprime 25 Nitomortar 30
The coverage rates are given for guidance only as actual quantities used will vary on nature of substrate and conditions on site.
www.fosroc.com Bangalore
Delhi
109-113, 1st Floor, Vikrant Towers 4, Rajendra Place New Delhi 110 008 Ph:011- 45062000-5 Fax: 011- 45062001 email:Delhi@fosroc.com
Kolkata
P-569, Lake Terrace Extn. First Floor Kolkata 700 029 Ph: 033 24650917 / 55343188 Fax: 033-24650891 email:Kolkata@fosroc.com
Vishnu Chittam, No.10, 1stFloor Sirur Park B Street, Seshadripuram Bangalore 560 020 Ph:080-2334 3188 Fax : 080-23368667 email: Bangalore@fosroc.com
Ahmedabad : (079) 26762799 Ankleshwar :(02646) 220704/224687 Bellary: 09845891690 Bhubaneshwar : (0674) 2521176 Chennai : (044) 24899949/24853383 Chandigarh : (0172) 2639360 Cochin : (0484) 2347465 Coimbatore : (0422) 2472966 Goa : (0832) 09423058696 Guwahati : (0361) 2462866 Hyderabad : (040) 27662324/27662425 Indore : (0731) 4049339 Jaipur : (0141) 2336103 Lucknow :(0522) 2239044 Nagpur: (0712) 2753510/2563242 Visakhapatnam : (0891) 2564850 / 2707607 INDIA/0409/C