Professional Documents
Culture Documents
SFM With Binlevel Measuringi
SFM With Binlevel Measuringi
SFM With Binlevel Measuringi
0140A/0510
DT : 20/09/2004.
Dear Sir,
Sub
Ref
Solids Flow Feeder & Bin Weighing Systems for 1350 TPD Cement Plant at
Meghalaya.
Your Tender Specification No. 03168-S-02-15 dtd.15/09/2004 sent through
our Delhi Office.
M. BAGCHI.
ENCL : AS ABOVE.
TECHNICAL SPECIFICATIONS
ITEM 1 : 2 NOS. SOLIDS FLOW FEEDER DLD 5H WITH PREFEEDING COAL
TWIN SCREWS BDS 250 AND CHECK WEIGHING.
A.
Feed Material
Eqpt No.
Max. Capacity
Bulk Density
Grain Size
Flow Characteristic
Moisture Content
Material Temperature
Accuracy
:
:
:
:
:
:
:
:
:
Pulverised Coal
451 FM1, 481 FM1
15 TPH
0.8 T/CU.M
Powder.
Flushing
1% Max
80 Deg C.
+/- 1.0 % of FSD with Check Weighing.
1 no. Solids Flow Feeder DLD 5H complete with guide chute, measuring chute, lever
system and load cell. Basic equipment as per specification TB 174/1.
Twin feed screw run length 2500 mm type BDS 250 with screw trough with variable
speed A.C. motors.
1 no. twin agitator with 2 nos. A.C. motors and gear box in Twin Screw trough.
1 no. Y-chute below twin screws.
2 nos. Manual Shut Off gates at inlet of SFF.
ELECTRICAL
a) Control cubicle, completely wired, tested of protection class IP 54 with basic dimensions
600 x 600 x 2100 mm ( W x D x H) housing the following : Microprocessor based measuring and control unit INTECONT PLUS according to
literature SJ 9109m with the following features :
2 line fluorescent text display of 20 characters each.
Upper display
: Set point.
Lower display
: Totalizing counters z1z3.
Absolute feedrate.
Relative feedrate.
Regulation.
Lower display selectable by cursor operation.
- Automatic tare programme and status information for interlocking signals.
- Provision for 1 no. 4-20 mA isolated set point reference input from DCS/PLC.
- Provision for 1 no. 4-20 mA isolated feed rate output to DCS/PLC.
- Provision for 1 no. pulse output corresponding to totalised value to DCS/PLC.
-
Together assembled with : - VVVF Inverter drive 1 no., make Siemens/Telemecanique, for speed control of AC
motors for twin screw. Rating 5.5 KW.
- Necessary switchgears comprising of isolating switch, fuses, overload relay and power
contactor.
- Selector switch for Remote/Panel/ Local mode selection operation.
NOTE : Power Supply for each control electrics shall be 415 VAC, 3 phase with +/- 10%
variation, 50 Hz with +/- 3% variation.
b) Local control box with :
-
Stop push button for stopping of SFF under any mode of operation.
Start push button for starting of SFF in emergency mode.
Potentiometer for rate setting in emergency mode.
B.
2 nos. Bin Weighing and Check Measuring system using 3 loadcells each to check calibration
of SFF.
Eqpt No.
Bin Capacity
Tare Weight
Gross Weight
:
:
:
:
L91FB1, L91FB2.
75 T.
15 T.
90 T.
MECHANICAL :
NOTE : Power supply shall be 230 VAC with +/- 10% variation, 50 Hz with +/- 3% variation.
PRICE SCHEDULE
SL.
NO.
1.
DESCRIPTION
Solids Flow Feeder DLD 5H
with twin screw BDS 250 &
Check Weighing system as per
scope of supply.
2.
QTY.
2 nos.
16,50,000.00
1 Lot
@ Rs. 150.00
per Mtr.
33,00,000.00
PRICE
PACKING &
FORWARDING
Extra @ 3%.
FREIGHT &
TRANSIT INSURANCE :
VALIDITY
DELIVERY
PAYMENT TERMS :
DEVIATIONS
Sl.
No.
Spec. document
Description of Deviation
1.
Payment Terms