Professional Documents
Culture Documents
Conventions For Cats and Specs
Conventions For Cats and Specs
Version 11.6
PLEASE NOTE: AVEVA Solutions has a policy of continuing product development: therefore, the information contained in this document may be subject to change without notice. AVEVA SOLUTIONS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. While every effort has been made to verify the accuracy of this document, AVEVA Solutions shall not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance or use of this material. This manual provides documentation relating to products to which you may not have access or which may not be licensed to you. For further information on which Products are licensed to you please refer to your licence conditions. Copyright 1991 through 2004 AVEVA Solutions Limited
All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of AVEVA Solutions. The software programs described in this document are confidential information and proprietary products of AVEVA Solutions or its licensors.
For details of AVEVA's worldwide sales and support offices, see our website at http://www.aveva.com
Contents
1
1.1 1.2 1.3 1.4
2
2.1 2.2
2.3
2.4
3 Conventions for Setting Up Hangers & Supports Catalogues and Specifications ........................................................................................................3-1
3.1 3.2 3.3 3.4 3.5 3.6 3.7 Introduction ............................................................................................................... 3-1 3.1.1 The Hanger Catalogue..................................................................................... 3-1 The Hanger Specifications........................................................................................ 3-4 Catalogue Naming Conventions for PDMS Catalogue /PSL-HANG-CAT ............ 3-5 Design Parameters and Dataset Properties for PDMS Catalogue /PSL-HANG-CAT .................................................................................................................................. 3-24 Selector List for PDMS Specification /PSL ......................................................... 3-128 Naming Conventions for Hanger Configuration Specifications ......................... 3-228 Hangers & Supports Configurations and Data Tables ....................................... 3-248 3.7.1 Configurations.............................................................................................. 3-248 3.7.2 Hanger Configurations ................................................................................ 3-248 3.7.3 Support Configuration Specifications ......................................................... 3-257 3.7.4 Data Tables .................................................................................................. 3-257
Contents-i
Contents
Contents-ii
1-1
Chapter 2 details the conventions used for setting up the structural Catalogues and Specifications used by the Beams & Columns and Panels & Plates applications. Chapter 3 lists the full Specification Tables used to hold data specific to the
1-2
applications. You might find these useful for reference if you need to design alternative components for structures.
2.1 Catalogues
You must use the following conventions for structural catalogues so that the DESIGN applications can recognise them and so that the PARAGON applications can use them:
The PURPose of the CATAlogue must be set to one of the following: STL, FITT, JOIN or PFIT. This ensures that any specifications and applications which are built can recognise the correct catalogue element. Thus the steel Profile specification looks for the purpose STL, the Joint specification looks for the purpose JOIN, the Fitting specification looks for the purpose FITT and the Panel Fitting specification looks for the purpose PFIT. A meaningful DESCription is also beneficial.
The PURPose of the STSEction must be set to REF for Reference Data, PRFL for Profiles, FITT for Fittings, JOIN for Joints and PFIT for Panel Fittings.
The PURPose of the STCAtegory must be set to REF for Reference Data, PRFL for Profiles, FITT for Fittings, JOIN for Joints and PFIT for Panel Fittings. The GTYPE of the Profile, Fitting, Joint or Panel Fitting must be set. This ensures that specific restrictions can be applied to Joints and Fittings when building the specifications. For example: any Section with a GTYPE set to BEAM can be used with a Joint which has its GTYPE set to BEAM; any Fitting with a GTYPE set to FITT can be used with any Fitting specification. The purpose of a CSTANdard is to let you define in a text string the type of standard that is being used. It is used purely for information and administration of the Catalogue. For example, the CSTANdard for British Sections is BS 5950.
2-3
The basic layout of the catalogues is the same as for piping, i.e. where the reference data is stored, but the way in which the data is separated differs.
CATA
Ref. Data
STSE
Geometry Set
Point Set
Data Set
GMSS
PTSE
Pline Set
NGM S NGMS
DTSE
PTSS
2-2
2.1.2
Administrative Elements
Description Purpose Description of catalogue Purpose should be the same as the SPEC with which the catalogue is to be used
CATAlogue
Description Gtype
Description of Section Generic type of element contained in section; this should be the same as the type of element used in DESIGN, e.g. BEAM
Description Purpose Function Gtype Skey Ptref Gmref Ngmref DataSetRef Pstreference Gstreference CDetail Ownconn Attconn CPlot Icon Cstandard
Description of category Purpose should equate to the STYP of the items as defined in the Spec Description Generic type
not applicable
Point set reference Geometry set reference Negative geometry reference Data set reference Pline set reference Profile set reference Detail reference Owning connection profile type Attached connection profile type Plot file for reference used in documentation Icon name Standard
2-3
Description of point set Generic type element used for. Symbol Key to which point set relates Purpose of point set Description of geometry set Generic type element is used for Purpose of geometry set Description of geometry set Generic type element is used for Purpose of geometry set Description of data set Generic type element is used for Purpose of data set Description of point set Generic type element is used for Purpose of point set Description of geometry structural set Generic type element is used for Purpose of geometry structural set
2.2 Datasets
The general purpose of Datasets is twofold : To let you query catalogue parameters To let you input design parameters via simple forms and menus (See Paragon Reference Manual, Section 9.7.)
2-4
CATA
Generic Type
Generic Type
Generic Type
Ref. Data
STSE
STSE
STSE
STSE
Ref. Data
Section
Section
Section
STCA
STCA
STCA
STCA
Serial Size
Serial Size
HPRF
HPRF
2-5
CATA
Lifting Lug
Stiffeners
Penetrations
Ref. Data
STSE
STSE
STSE
STSE
Ref. Data
Single
Double
Channel
STCA
STCA
STCA
STCA
10mm Thk
12mm Thk
HFIT
HFIT
2-6
CATA
End Plate
Cleats
End Preparations
Ref. Data
STSE
STSE
STSE
STSE
Ref. Data
Seating
Bolted
Notched
STCA
STCA
STCA
STCA
4M20
6M20
HJOI
HJOI
2-7
BE AM
STSEction
Description Purpose G type <string> PRFL <word>
BE AM
Beam ss Beam
ANG
Angle Angle
Colum ns Colum ns
STC Ategory
Description Purpose Function G type Ptref G mref Ngmref Dtref Pstref G stref CDetail Ow nconn Attconn Cplot Ic on Cstandard <string> PRFL <string> <word> na na na <ref> <ref> <ref> na na
914x416 914x416
457x152 457x152
406x178 406x178
Profile
Gtype Parameters Pstref Gstrer Dtref <w ord> <array> <ref> <ref> <ref>
457x152x82 457x152x82
457x152x74 457x152x74
2-8
STSEction
Description Purpose Gtype <string> PRFL <word>
H HProfiles Profiles
I IProfiles Profiles
LLProfiles Profiles
STC Ategory
Description Purpose Function Gtype Ptref Gmref Ngmref Dtref Pstref Gstref CDetail Ow nconn Attconn Cplot Ic on Cstandard <string> PRFL <string> <word> na na na <ref> <ref> <ref> na na
IPN IPN
IPE IPE
IPB IPB
Profile
Gtype Parameters Pstref Gstrer Dtref <word> <array> <ref> <ref> <ref>
IPE400 IPE400
IPE450 IPE450
2-9
Fittings Fittings
STSEction
Description Purpose Gtype <string> FITT <word>
Lugs Lugs
Stiffeners Stiffeners
Penetrations Penetrations
STC Ategory
Description Purpose Function Gtype Ptref Gmref Ngmref Dtref Pstref Gstref CDetail Ow nconn Attconn Cplot Ic on Cstandard <string> FITT <string> <word> <ref> <ref> <ref> <ref> na na <word> na
Fitting
G type Parameters Pstref G strer Dtref <w ord> <array> <ref> <ref> <ref>
2-10
Joints Joints
STSEction
Description Purpose Gtype <string> JOIN <word>
Cleats Cleats
STCAtegory
Description Purpose Function Gtype Ptref Gmref Ngmref Dtref Pstref Gstref CDetail Ownconn Attconn Cplot Icon Cstandard <string> JOIN <string> <word> <ref> <ref> <ref> <ref> <ref> na <word> <word>
Seating Seating I I- -I I
Bolted Bolted I I- -I I
Notched Notched I I- -I I
Joint
Gtype Parameters Pstref Gstrer Dtref <word> <array> <ref> <ref> <ref>
4M20 4M20
6M20 6M20
2-11
Panel Panel
STSEction
Description Purpose Gtype <string> PF IT <word>
W indows W indows
Doors Doors
Holes Holes
STC Ategory
Description Purpose Function Gtype Ptref Gmref Ngmref Dtref Pstref Gstref CDetail Ow nconn Attconn Cplot Ic on Cstandard <string> PF IT <string> <word> <ref> <ref> <ref> <ref> na na <word> na
External External
Internal Internal
Fitting
Gtype Parameters Pstref Gstrer Dtref <word> <array> <ref> <ref> <ref>
2-12
STSEction ST SEction
STCAtegory
Description Purpose Function Gtype Ptref Gmref Ngmref Dtref Pstref Gstref CDetail Ow nconn Attconn Cplot Icon Cstandard <string> REF <string> <word> <ref> <ref> <ref> <ref> na na <word> na
Dat Daa ta Se t S et
GMSE/PTSS/GMSS/DTSE
Description Gtype Purpose <string> <word> <word>
PTSE
Description Gtype Skey Purpose <string> <word> <word> <word>
2-13
2.3 Specifications
The following conventions for structural specifications must be followed to ensure that a correct specification is built. The application follows strict rules when building these specifications and reads the specification in a tabulated format. Description should be given at the correct level and any question of Tanswers must be input for the forms and menus to be correctly built. The steelwork specifications work in a different way to piping specifications, where there can be more than one answer. For example, a typical connection for two beams can either be a bolted or welded connection; hence there can be two answers to one question.
2-14
BS-Standard
SPEC EC SP SP EC
UB
UC
RHS
CHS
SELE SELE
SELE SELE
SELE SELE
SELE SELE
305x305X97
305x305x118
305x305x137
305x305x137
SPCO SPCO
SPCO SPCO
SPCO SPCO
SPCO SPCO
Attributes for Specification elements in hierarchical order : Type SPEC Attribute Description Purpose Question Matref SELE Description Tanswer SPCO Catref Detref Data { str } STL GYTP { ref } { str } { word } { ref } { ref } Description display on form spec gadget spec purpose question for offspring material reference in Property DB information on type of profile generic type of profile pointer to HPRF in catalogue pointer to detail text
2-15
SPEC
RHS Fitting
Beam Fitting
Universal Fitting
SELE
SELE
SELE
Hanger
Insulation
Stiffener
Penetration
SELE
SELE
SELE
SELE
Single
Double
SPCO
SPCO
Attributes for Specification elements in hierarchical order : Type SPEC Attribute Description Purpose Question Matref SELE Description Tanswer Data { str } FITT TYPE { ref } { str } { word } Description display on form spec gadget spec purpose question for offspring material reference in Property DB information on type of profile generic type of profile that can own the fitting. ANY will allow a fitting to be used on any profile type. question for offspring display on form stype gadget sub-type of fitting, e.g. LUG, HOLE, etc. pointer to HFIT in catalogue pointer to detail text
2-16
Panel Fitting
SP EC SPEC
Inspection
Do ors
Wind ows
SELE
SELE
SELE
Blast
Fire
Internal
SELE
SELE
SELE
SPCO
SPCO
Attributes for Specification elements in hierarchical order : Type SPEC Attribute Description Purpose Question Matref SELE Description Question Tanswer SELE Description Data { str } PFIT TYPE { ref } { str } STYP { word } { str } Description display on form spec gadget spec purpose question for offspring material reference in Property DB display generic type on form question for offspring generic type of fitting display on form stype gadget
2-17
Tanswer
{ word }
sub-type of fitting, e.g. Door, Window etc. pointer to PFIT in catalogue pointer to detail text
SPCO
Catref Detref
{ ref } { ref }
2-18
SPEC
Column Connections
Beam Connections
Universal Joints
SELE
SELE
SELE
Any Profile
Beam
RHS
Angle
SELE
SELE
SELE
SELE
Double Cleats
End Plates
Seating Cleats
SELE
SELE
SELE
60x60x10 4 Bolts
60x60x10 6 Bolts
SPCO
SPCO
Attributes for Specification elements in hierarchical order: Type SPEC Attribute Description Purpose Question Matref SELE Description Tanswer Data { str } JOIN OTYP { ref } { str } { word } Description display on form spec gadget spec purpose question for offspring material reference in Property DB display on form stype gadget generic type of profile which joints can be owned by. ANY will allow joints to be owned by any profile, NONE will allow setting of PJOI specrefs. question for offspring
Question
ATYP
2-19
SELE
Description Tanswer
{ str } { word }
information on type of profile generic type of profile that can be attached to joint. ANY will allow any type of profile to be attached to the joint. question for offspring pointer to PFIT in catalogue pointer to detail text
2-20
S peci fication
D escrip tion Purpos e Q uesti on M atref C stand ard <string> STL G TYP <ref> <string>
BEAM
B EA M
CHAN
S elect or
D escrip tion Tansw e r <string> <w ord>
U niversa l C olum ns
U nivers al B eam s
C hannels
457x152x82
457x152x74
406x178x74
406x178x60
2-21
S p e c ific a tio n
D e s c rip ti o n P u rp o s e Q u e s tio n M a tr e f C s ta n d a r d < s trin g > P F IT GTYP < re f> < s trin g >
W IN D
A rc h ite c tu ra l
DOOR
L IG H
S e l e c to r (le v e l 1 )
D e s c rip ti o n Tansw er Q u e s tio n < s trin g > < w o rd > STYP
W in d o w s
D o o rs
L ig h ts
IN S P
B U LK
F IR E
BLAS
S e l e c to r (le v e l 2 )
D e s c rip ti o n Tansw er < s trin g > < w o rd >
In s p e c tio n C o v e rs
W a te r T ig h t B u lk h e a d s
F ire D o o rs
B la s t D o o rs
SpecC om ponent
C a tR e f D e ta il < re f> < re f>
S td S in g le In te rn a l
S td S in g le E x te rn a l
2-22
Sp ecification
De scri ption Pu rpos e Qu estion Ma tref Cs tand ard <string> FITT TYPE <ref> <string>
BOX
BEAM
Beam F ittings
AN Y
Universa l Fittings
Se lector (lev el 2)
De scription Ta nswer <string> <word>
ST IF
Stiffeners
SpecCompo nent
CatRef Detail <ref> <ref>
Si ng le Full D epth
2-23
S p ecifica tio n
D es crip tio n P u rp o s e Q u e stio n M atref C stan d a rd < strin g > JO IN OTYP < ref> < strin g >
NONE C o lu m n E n d -p lates
BEAM
B ea m
ANY
TUBE
BEAM
ANG
A n y A tta ch P ro file
H o llo w S e ctio n
B ea m
A n g le
D o u ble C lea ts
End P lates
S e atin g C lea ts
S p ecC om po n en t
C atR ef D etail < ref> < ref>
60 x6 0x 10 4 B o lts
60 x6 0x 10 6 B o lts
2-24
2-25
3.1 Introduction
3.1.1 The Hanger Catalogue
The Hanger catalogue is analogous to the Piping catalogue. Components are created in much the same way, using the element types PCLA (Pipe Clamp), HELE (Hanger Element), ROD, and SCLA (Steel Clamp). You are advised to study the sample catalogue provided by AVEVA, together with these notes, before creating your own catalogue components. Component Point Sets In general, arrive and leave p-points should be in the same direction as the axes about which the component can be rotated at the respective ends. For variable height components, the positions of arrive and leave p-points should be related to the distance between the leave of the previous and the arrive of the next, and not the actual height. If a maximum or minimum distance is applicable to the component, p-points should be provided from which this distance can be measured. Bores For hangers, the PBOR attribute is interpreted as the equivalent hanger rod diameter. It is valid to have a zero-bore rod and still successfully use the CHOOSE command. Items which are not sized by rod (or pin) diameter or which do not have a concept of rod diameter (such as pipe shoes and welded attachments) should have PBOR set to zero. In such cases, the system will not attempt to set the LSRO attribute of the component. Pipe Clamps (PCLAs) Pipe clamps should always have their P1 pointing in the direction of flow in the pipe as this is the direction used for the hanger head. For PCLAs to be used on implied tube, the P2 will be perpendicular to the P1. For PCLAs to be used on piping components (e.g. ELBOs) the P2 will be opposite in direction to the P1. The PBOR of the pipe end of the PCLA (P1) should be set to the equivalent nominal bore of the pipe. Some PCLAs (such as U-Bolts) can be applied to sloping pipes and the angle between the P1 and P2 will be variable. In such cases, put the DDANG on the P2.
3-1
Steel Clamps (SCLAs) A p-point should be provided which will be used to orientate the SCLA with respect to the steelwork to which it is attached. The direction should be that of the attached steel when connected to the flange. P-Point NONE WELD FPIN MPIN BOLT RHOL RROD LHOL LROD CLAM HOLE FSWA MSWA Connection Types: No connection Welded connection Female pin Male pin Bolted connection Right-hand-threaded hole Right-hand-threaded rod Left-hand-threaded hole Left-hand-threaded rod Clamped connection Hole (for rod) Female spherical washer Male spherical washer
Material Texts The supplied catalogue uses the XTEX attribute of HMTE elements to store material data Detail Texts The supplied catalogue uses the RTEX attribute of HDTE elements to store long descriptions of components for drawings, etc.; the STEX attribute to store concise ordering codes for MTO, etc.; and the TTEX attribute to store details of additional items which form part of the component but which need to be ordered separately. Data Sets The Hangers & Supports application makes great use of the catalogue Datasets. The following rules apply to their use. For Datakeys which tell the appware to set certain Design Parameters:
The PPROP attribute must be set to an expression which gives the value
parameter.
3-2
The following Datakeys are reserved for use by the application and have the special meaning shown: POD SWID FLTH CRAD RINA RINB VSLO VSEX DATA Pipe outside diameter (e.g. for lugs) X -width of attached steel section (SCTN) Flange thickness of attached steelwork Component bend radius (e.g. for lugs/trunnions attached to bends) Rod insertion distance at P1 * Rod insertion distance at P2 * Variable spring load (Note: PUNIT attribute should be set) Variable spring extension/compression distance A special case where the design parameter is not set automatically, but rather prompts the user to enter the data.
(* These values are calculated from the Rod take-out values of the Prev/Next components and represent the distance between the P1/P2 points and the actual ends of the component.) Datakeys which give information either to DESIGN appware for sizing purposes or to ADP (automatic drawing production) appware for drawing data etc. are usually set to component parameters or hard data. The PURP attribute is set to PARA to indicate that, while the information is used by the DESIGN appware, it is not required for ADP or MTO: RTVA RTVB THLA THLB VSPR MNLO DHEI Rod take-out value at P1 # Rod take-out value at P2 # Thread length at P1 Thread length at P2 Variable spring rate (units as set for VSLO) Minimum load in working range Loaded default height (for components which are adjusted, regardless of load, to a fixed height)
(# These values represent the distances from P1/P2 that attached rods should extend in the fitted position.) Other Datakeys may be defined as a means of forcing an ADP application to output database information on drawings and MTO lists. The PURP attribute of these Datakeys should be set to DATA. The following settings of this type are used in the supplied catalogue: OLEN Component overall length HEIG Height DIMA Dimension A (as defined in the paper catalogue)
3-3
Naming Conventions A naming convention for catalogue components has been developed following the conventions of the ISOCAT style in use by AVEVA and a number of customers for many years. This convention is detailed later in this section.
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
3-15
3-16
3-17
3-18
3-19
3-20
3-21
3-22
3-23
3.4 Design Parameters and Dataset Properties for PDMS Catalogue /PSL-HANG-CAT
(derived from the hanger catalogue of Pipe Supports Ltd)
3-24
RTVB RTVB RTVB RTVB RTVB RTVB RTVB RTVB RTVB RTVB RTVB RTVB
Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod
Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion
Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance
at at at at at at at at at at at at
P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2
3-25
DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End
THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB
Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length -
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End Plant Design Conventions for Catalogues and Specifications Version 11.6
3-26
CATREF /H-PMHAR2RMM /H-PMHAR2RPP /H-PMHAR3RCC /H-PMHAR3RDD /H-PMHAR3REE /H-PMHAR3RFF /H-PMHAR3RHH /H-PMHAR3RKK /H-PMHAR3RMM /H-PMHAR3RPP /H-PMHAR4RCC /H-PMHAR4RDD /H-PMHAR4REE /H-PMHAR4RFF /H-PMHAR4RHH /H-PMHAR4RKK /H-PMHAR4RMM /H-PMHAR4RPP /H-PMHAR6RCC /H-PMHAR6RDD /H-PMHAR6REE /H-PMHAR6RFF /H-PMHAR6RHH /H-PMHAR6RKK /H-PMHAR6RMM
PBOR1 36 42 10 12 16 20 24 30 36 42 10 12 16 20 24 30 36 42 10 12 16 20 24 30 36
PBOR2 36 42 10 12 16 20 24 30 36 42 10 12 16 20 24 30 36 42 10 12 16 20 24 30 36
DESIGN DATA DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance DESP 1: RINB Distance
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-27
CATREF /H-PMHAR6RPP /H-PMHAR7RCC /H-PMHAR7RDD /H-PMHAR7REE /H-PMHAR7RFF /H-PMHAR7RHH /H-PMHAR7RKK /H-PMHAR7RMM /H-PMHAR7RPP /H-PMHBL1RDD /H-PMHBL1REE /H-PMHBL1RFF /H-PMHBL1RHH /H-PMHBL1RKK /H-PMHBL1RMM /H-PMHBL1RPP /H-PMHBR1RDD /H-PMHBR1REE /H-PMHBR1RFF /H-PMHBR1RHH /H-PMHBR1RKK /H-PMHBR1RMM /H-PMHBR1RPP /H-PMHBR2RDD /H-PMHBR2REE
PBOR1 42 10 12 16 20 24 30 36 42 12 16 20 24 30 36 42 12 16 20 24 30 36 42 12 16
PBOR2 42 10 12 16 20 24 30 36 42 12 16 20 24 30 36 42 12 16 20 24 30 36 42 12 16
DESIGN DATA DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: RINB Distance P2 to Rod End DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: DDHEI : DESP 1: RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 Min P10/P14 (0) RINB Distance P2 to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End Plant Design Conventions for Catalogues and Specifications Version 11.6
3-28
3-29
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-30
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
at at at at at at at at at at at at at at at at at at at at at at
P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2
3-31
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN THLB OLEN
Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length Thread Length Overall Length
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-32
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-33
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-34
to Rod End to Rod End to Rod End to to to to to to to to to to to to to to to to to to to to to to Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod Rod End End End End End End End End End End End End End End End End End End End End End End
P2 End P2 End P2 End P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 End End End End End End End End End End End End End End End End End End End End End End
RINA Distance RINB Distance Min P6/P7 (0) RINA Distance RINB Distance Min P6/P7 (0) RINA Distance RINB Distance Min P6/P7 (0)
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
Thread Length Thread Length Overall Length Thread Length Thread Length Overall Length Thread Length Thread Length Overall Length
3-35
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-36
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-37
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-38
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-39
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-40
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-41
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-42
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-43
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-44
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-45
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-46
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-47
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-48
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-49
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-50
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-51
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-52
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-53
P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End P1 to Rod End P2 to Rod End
P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End P1 End P2 End
3-54
Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width Width
3-55
3-56
Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance
at at at at at at at at at at at at at at at at at at at at at at at at at at at at
P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2
3-57
at at at at at at at at at at at at at at at at
P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2 P1 P2
3-58
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-59
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End P2 End
3-60
to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End to Rod End
DESP 1: VSLO Variable Support Load DESP 2: VSEX Spring Variation from Min Load DESP 1: VSLO Variable Support Load DESP 2: VSEX Spring Variation from Min Load DESP 1: VSLO Variable Support Load DESP 2: VSEX Spring Variation from Min Load
at at at at at at at at at at at at at at at at at at at at at at at at at
P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P1 P2
/H-PMHX1RRDDA2
12
12
at P1 at P2 at P1 at P2
/H-PMHX1RRDDA3
12
12
3-61
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RRDDB2
12
12
/H-PMHX1RRDDB3
12
12
/H-PMHX1RRDDC1
12
12
/H-PMHX1RRDDC2
12
12
/H-PMHX1RRDDC3
12
12
/H-PMHX1RRDDD1
12
12
/H-PMHX1RRDDD2
12
12
/H-PMHX1RRDDD3
12
12
/H-PMHX1RRDDE1
12
12
/H-PMHX1RRDDE2
12
12
/H-PMHX1RRDDE3
12
12
3-62
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RRDDF2
12
12
/H-PMHX1RRDDF3
12
12
/H-PMHX1RRDDG1
12
12
/H-PMHX1RRDDG2
12
12
/H-PMHX1RRDDG3
12
12
/H-PMHX1RRDDH1
12
12
/H-PMHX1RRDDH2
12
12
/H-PMHX1RRDDH3
12
12
/H-PMHX1RRDDJ1
12
12
/H-PMHX1RRDDJ2
12
12
/H-PMHX1RRDDJ3
12
12
3-63
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RRDDK2
12
12
/H-PMHX1RRDDK3
12
12
/H-PMHX1RRDDL1
12
12
/H-PMHX1RRDDL2
12
12
/H-PMHX1RRDDL3
12
12
/H-PMHX1RRDDM1
12
12
/H-PMHX1RRDDM2
12
12
/H-PMHX1RRDDM3
12
12
/H-PMHX1RRDDN1
12
12
/H-PMHX1RRDDN2
12
12
/H-PMHX1RRDDN3
12
12
3-64
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RRDDP2
12
12
/H-PMHX1RRDDP3
12
12
/H-PMHX1RRDDQ1
12
12
/H-PMHX1RRDDQ2
12
12
/H-PMHX1RRDDQ3
12
12
/H-PMHX1RREER1
16
16
/H-PMHX1RREER2
16
16
/H-PMHX1RREER3
16
16
/H-PMHX1RREES1
16
16
/H-PMHX1RREES2
16
16
/H-PMHX1RREES3
16
16
3-65
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RREET2
16
16
/H-PMHX1RREET3
16
16
/H-PMHX1RRFFU1
20
20
/H-PMHX1RRFFU2
20
20
/H-PMHX1RRFFU3
20
20
/H-PMHX1RRHHV1
24
24
/H-PMHX1RRHHV2
24
24
/H-PMHX1RRHHV3
24
24
/H-PMHX1RRKKW1
30
30
/H-PMHX1RRKKW2
30
30
/H-PMHX1RRKKW3
30
30
3-66
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2
/H-PMHX1RRKKX2
30
30
/H-PMHX1RRKKX3
30
30
/H-PMHX1RRMMY1
36
36
/H-PMHX1RRMMY2
36
36
/H-PMHX1RRMMY3
36
36
/H-PMHX1RRPPZ1
42
42
/H-PMHX1RRPPZ2
42
42
/H-PMHX1RRPPZ3
42
42
/H-PMHX1RRRR11
48
48
/H-PMHX1RRRR12
48
48
/H-PMHX1RRRR13
48
48
3-67
at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P2 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
/H-PMHX1RRTT22
56
56
/H-PMHX1RRTT23
56
56
/H-PMHX1RRVV31
64
64
/H-PMHX1RRVV32
64
64
/H-PMHX1RRVV33
64
64
12 12 12 12 12 12 12 12
12 12 12 12 12 12 12 12
3-68
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-69
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-70
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-71
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-72
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-73
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-74
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-75
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-76
Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min Variable Support Load Spring Variation from Min
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
3-77
Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1 at P1
/H-PMHX4000012
/H-PMHX4000013
/H-PMHX4000021
3-78
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX4000023
/H-PMHX4000031
/H-PMHX4000032
/H-PMHX4000033
/H-PMHX40000A1
/H-PMHX40000A2
/H-PMHX40000A3
/H-PMHX40000B1
/H-PMHX40000B2
3-79
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000C1
/H-PMHX40000C2
/H-PMHX40000C3
/H-PMHX40000D1
/H-PMHX40000D2
/H-PMHX40000D3
/H-PMHX40000E1
/H-PMHX40000E2
/H-PMHX40000E3
3-80
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000F2
/H-PMHX40000F3
/H-PMHX40000G1
/H-PMHX40000G2
/H-PMHX40000G3
/H-PMHX40000H1
/H-PMHX40000H2
/H-PMHX40000H3
/H-PMHX40000J1
3-81
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000J3
/H-PMHX40000K1
/H-PMHX40000K2
/H-PMHX40000K3
/H-PMHX40000L1
/H-PMHX40000L2
/H-PMHX40000L3
/H-PMHX40000M1
/H-PMHX40000M2
3-82
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000N1
/H-PMHX40000N2
/H-PMHX40000N3
/H-PMHX40000P1
/H-PMHX40000P2
/H-PMHX40000P3
/H-PMHX40000Q1
/H-PMHX40000Q2
/H-PMHX40000Q3
3-83
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000R2
/H-PMHX40000R3
/H-PMHX40000S1
/H-PMHX40000S2
/H-PMHX40000S3
/H-PMHX40000T1
/H-PMHX40000T2
/H-PMHX40000T3
/H-PMHX40000U1
3-84
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000U3
/H-PMHX40000V1
/H-PMHX40000V2
/H-PMHX40000V3
/H-PMHX40000W1
/H-PMHX40000W2
/H-PMHX40000W3
/H-PMHX40000X1
/H-PMHX40000X2
3-85
Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1 Load from Min Max P4/P1
/H-PMHX40000Y1
/H-PMHX40000Y2
/H-PMHX40000Y3
/H-PMHX40000Z1
/H-PMHX40000Z2
/H-PMHX40000Z3
/H-PMHY0RRHF1 /H-PMHY0RRHH2 /H-PMHY0RRHH3 /H-PMHY0RRMK4 /H-PMHY0RRMM5 /H-PMHY0RRMM6 /H-PMHY0RRPP7 /H-PMHY0RRRR8 /H-PMP1HPR1K /H-PMP1HPR2K /H-PMP1HPR3K /H-PMP1HPR4K /H-PMP1HPR5M /H-PMP1HPRGD /H-PMP1HPRHD
0 0 0 0 0 0 0 0 30 30 30 30 36 12 12
3-86
3-87
3-88
3-89
3-90
3-91
3-92
3-93
3-94
DESP 1: DESP 2: radius DESP 1: DESP 2: radius DESP 1: DESP 2: radius DESP 1: DESP 2: radius
POD Attached pipe O/D CRAD Attached component bend POD Attached pipe O/D CRAD Attached component bend POD Attached pipe O/D CRAD Attached component bend POD Attached pipe O/D CRAD Attached component bend
3-95
3-96
3-97
3-98
3-99
3-100
3-101
3-102
3-103
3-104
DIMA Dimension A
3-105
80
80
80
100
100
100
100
125
125
125
125
3-106
150
150
150
150
150
150
150
175
175
175
175
3-107
175
200
200
200
200
200
200
200
200
225
225
3-108
225
225
225
225
250
250
250
250
250
250
250
3-109
300
300
300
300
300
350
350
350
400
400
400
15 20
6 6
3-110
Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance Distance
at at at at at at at at at at at at at at at at at at at at at at at at at at at at at at at
P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2 P2
3-111
3-112
RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB RTVA RTVB DIMA
Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Base Width Base Depth Dimension A
3-113
Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5) Attached pipe O/D P4/P2 (PARAM 5)
3-114
/H-PMPTCP0D0C
32
/H-PMPTCP0E0C
40
/H-PMPTCP0E0E
40
/H-PMPTCP0F0C
50
/H-PMPTCP0F0E
50
/H-PMPTCP0F0F
50
/H-PMPTCP0G0E
65
3-115
/H-PMPTCP0H0E
80
/H-PMPTCP0H0F
80
/H-PMPTCP0H0H
80
/H-PMPTCP0J0F
100
/H-PMPTCP0J0H
100
/H-PMPTCP0J0J
100
/H-PMPTCP0K0H
125
/H-PMPTCP0K0J
125
/H-PMPTCP0L0H
150
/H-PMPTCP0L0J
150
/H-PMPTCP0L0L
150
3-116
/H-PMPTCP0M0J
175
/H-PMPTCP0M0L
175
/H-PMPTCP0N0J
200
/H-PMPTCP0N0L
200
/H-PMPTCP0N0N
200
/H-PMPTCP0P0L
225
/H-PMPTCP0P0N
225
/H-PMPTCP0Q0L
250
/H-PMPTCP0Q0N
250
/H-PMPTCP0R0L
300
/H-PMPTCP0R0N
300
3-117
/H-PMPTCP0T0N
400
DIMA Dimension A
/H-PMPUPPRAB
15
/H-PMPUPPRBB
20
/H-PMPUPPRCB
25
/H-PMPUPPRDB
32
/H-PMPUPPREC
40
/H-PMPUPPRFC
50
/H-PMPUPPRGD
65
/H-PMPUPPRHE
80
/H-PMPUPPRJE
100
/H-PMPUPPRKE
125
3-118
/H-PMPUPPRNF
200
/H-PMPUPPRQF
250
/H-PMPUPPRRF
300
/H-PMPUPPRSH
350
/H-PMPUPPRTH
400
/H-PMPUPPRUH
450
/H-PMPUPPRVH
500
/H-PMPUPPRXH
600
15 20 25 32
0 0 0 0
THLB Thread Length - P2 End THLB Thread Length - P2 End THLB Thread Length - P2 End THLB Thread Length - P2 End
3-119
Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness
3-120
Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness Thickness O/D O/D O/D O/D O/D O/D O/D
3-121
3-122
3-123
DDHEI : Min P4/P5 (0) DDHEI : Min P4/P5 (0) DDHEI : Min P4/P5 (0) DDHEI : Min P4/P5 (0)
3-124
at at at at at at at at at
P1 P1 P1 P1 P1 P1 P1 P1 P1
3-125
3-126
3-127
3-128
TYPE SCLA
PBOR0 0
TTYP 4 POINT
UTYP SHORT
PBOR1 20 25 32 40 50 65 80
CATREF /H-PMSQSXXBB /H-PMSQSXXCC /H-PMSQSXXDD /H-PMSQSXXEE /H-PMSQSXXFF /H-PMSQSXXGG /H-PMSQSXXHH /H-PMSQRXXBB /H-PMSQRXXCC /H-PMSQRXXDD /H-PMSQRXXEE /H-PMSQRXXFF /H-PMSQRXXGG /H-PMSQRXXHH /H-PMSRSXXBB /H-PMSRSXXCC /H-PMSRSXXDD /H-PMSRSXXEE /H-PMSRSXXFF /H-PMSRSXXGG /H-PMSRSXXHH /H-PMSRRXXBB /H-PMSRRXXCC /H-PMSRRXXDD /H-PMSRRXXEE /H-PMSRRXXFF /H-PMSRRXXGG /H-PMSRRXXHH
TALL
20 25 32 40 50 65 80
2 POINT
TALL
20 25 32 40 50 65 80
SHORT
20 25 32 40 50 65 80
DETAIL PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318A (Welded Type 4, Size 1), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-318B (Welded Type 4, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319B (Welded Type 5, Size 2), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1), PSL-319A (Welded Type 5, Size 1),
Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size Overstrap Pipe Size
20 25 32 40 50 65 80 20 25 32 40 50 65 80 20 25 32 40 50 65 80 20 25 32 40 50 65 80
MATERIAL BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent
3-129
TYPE
PBOR0
TTYP 60 76 88 114 139 168 193 219 244 273 323 355
UTYP
PBOR1
SPACER
CATREF DETAIL /H-PMS100000-CHS60.3 Fabricated x5 60.3 /H-PMS100000-CHS76.1 Fabricated x5 76.1 /H-PMS100000-CHS88.9 Fabricated x5 88.9 /H-PMS100000-CHS114. Fabricated 3x6.3 114.3 /H-PMS100000-CHS139. Fabricated 7x10 139.7 /H-PMS100000-CHS168. Fabricated 3x10 168.3 /H-PMS100000-CHS193. Fabricated 7x16 193.7 /H-PMS100000-CHS219. Fabricated 1x20 219.1 /H-PMS100000-CHS244. Fabricated 5x20 244.5 /H-PMS100000-CHS273. Fabricated 0x25 273.0 /H-PMS100000-CHS323. Fabricated 9x25 323.9 /H-PMS100000-CHS355. Fabricated 6x25 355.6 /H-PMHSWXXAA Spacer for /H-PMHSWXXBB Spacer for /H-PMHSWXXCC Spacer for /H-PMHSWXXDD Spacer for /H-PMHSWXXEE Spacer for /H-PMHSWXXFF Spacer for /H-PMHSWXXHH Spacer for /H-PMHSWXXJJ Spacer for /H-PMHSWXXLL Spacer for /H-PMHSWXXNN Spacer for /H-PMHSXXXAA Spacer for Clamp /H-PMHSXXXBB Spacer for Clamp /H-PMHSXXXCC Spacer for Clamp /H-PMHSXXXDD Spacer for Clamp /H-PMHSXXXEE Spacer for Clamp /H-PMHSXXXFF Spacer for Clamp /H-PMHSXXXGG Spacer for Clamp /H-PMHSXXXHH Spacer for Clamp /H-PMHSXXXJJ Spacer for Clamp /H-PMHSXXXKK Spacer for Clamp /H-PMHSXXXLL Spacer for Clamp
CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D CHS Pedestal O/D Tico Tico Tico Tico Tico Tico Tico Tico Tico Tico Hold Clad Clad Clad Clad Clad Clad Clad Clad Clad Clad Down U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt U-Bolt Pipe
MATERIAL BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 BS 4848 Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel
Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe
Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
3-130
TYPE
PBOR0
STYP
TTYP
UTYP
PBOR1 175 200 225 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000
CATREF /H-PMHSXXXMM /H-PMHSXXXNN /H-PMHSXXXPP /H-PMHSXXXQQ /H-PMHSXXXRR /H-PMHSXXXSS /H-PMHSXXXTT /H-PMHSXXXUU /H-PMHSXXXVV /H-PMHSXXXWW /H-PMHSXXXXX /H-PMHSXXXYY /H-PMHSXXXZZ /H-PMHSXXX11 /H-PMHSXXX22 /H-PMHSXXX33 /H-PMHSXXX44 /H-PMHSXXX55 /H-PMHSYXXFF /H-PMHSYXXGG /H-PMHSYXXHH /H-PMHSYXXJJ /H-PMHSYXXKK /H-PMHSYXXLL /H-PMHSYXXNN /H-PMHSYXXQQ /H-PMHSYXXRR /H-PMHSYXXSS
DETAIL Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp Spacer for Pipe Clamp
Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Hold Down Pipe Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down Anchor Hold Down
MATERIAL Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
3-131
TYPE
PBOR0
STYP
TTYP
UTYP
CATREF /H-PMHSYXXTT /H-PMHSYXXUU /H-PMHSYXXVV /H-PMHSYXXXX /H-PMHSUXXAA /H-PMHSUXXBB /H-PMHSUXXCC /H-PMHSUXXDD /H-PMHSUXXEE /H-PMHSUXXFF /H-PMHSUXXGG /H-PMHSUXXHH /H-PMHSUXXJJ /H-PMHSUXXKK /H-PMHSUXXLL /H-PMHSUXXNN /H-PMHSUXXQQ /H-PMHSUXXRR /H-PMHSUXXSS /H-PMHSUXXTT /H-PMHSUXXUU /H-PMHSUXXVV /H-PMHSUXXXX /H-PMHSVXXAA /H-PMHSVXXBB /H-PMHSVXXCC /H-PMHSVXXDD /H-PMHSVXXEE /H-PMHSVXXFF /H-PMHSVXXGG /H-PMHSVXXHH /H-PMHSVXXJJ /H-PMHSVXXKK /H-PMHSVXXLL /H-PMHSVXXNN /H-PMHSVXXQQ /H-PMHSVXXRR /H-PMHSVXXSS /H-PMHSVXXTT /H-PMHSVXXUU /H-PMHSVXXVV /H-PMHSVXXXX /H-PMSS00000 /H-PMSB0R0B0 /H-PMSBXR0B0 /H-PMSC0R0B0 /H-PMSCXR0B0
GRIP UBOLT
NON-GRIP UBOLT
15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
=BEAM INVERTED
BOLTING ATTACHMENT
=BEAM INVERTED
DETAIL MATERIAL Spacer for Anchor Hold Down Carbon Steel Pipe Clamp Spacer for Anchor Hold Down Carbon Steel Pipe Clamp Spacer for Anchor Hold Down Carbon Steel Pipe Clamp Spacer for Anchor Hold Down Carbon Steel Pipe Clamp Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Spacer for PSL-311 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Wear Pad for PSL-313 Carbon Steel Shim for Rectangular Pipe Base Carbon Steel PSL-122 (Beam Welding BS EN10 025 Grade FE Attachment), Rod Size 8 430A or Equivalent PSL-125 (Inverted Beam Welding BS EN10 025 Grade FE Attachment), Pin Size 8 430A or Equivalent PSL-123 (Beam Bolting BS EN10 025 Grade FE Attachment), Rod Size 8 430A or Equivalent BS EN10 025 Grade FE PSL-126 (Inverted Bolting Attachment), Pin Size 8 430A or Equivalent
3-132
TYPE
PBOR0 10
UTYP
PBOR1
BOLTING ATTACHMENT
=BEAM INVERTED
LUG ATTACHMENT 12 WELDING ATTACHMENT =BEAM INVERTED BOLTING ATTACHMENT =BEAM INVERTED LUG ATTACHMENT 16 WELDING ATTACHMENT =BEAM INVERTED BOLTING ATTACHMENT =BEAM INVERTED LUG ATTACHMENT 20 WELDING ATTACHMENT =BEAM INVERTED BOLTING ATTACHMENT =BEAM INVERTED LUG ATTACHMENT 24 WELDING ATTACHMENT =BEAM INVERTED BOLTING ATTACHMENT =BEAM INVERTED LUG ATTACHMENT 30 WELDING ATTACHMENT =BEAM INVERTED
/H-PMSB0R0D0 /H-PMSBXR0D0 /H-PMSC0R0D0 /H-PMSCXR0D0 /H-PMSL0R0D0 /H-PMSB0R0E0 /H-PMSBXR0E0 /H-PMSC0R0E0 /H-PMSCXR0E0 /H-PMSL0R0E0 /H-PMSB0R0F0 /H-PMSBXR0F0 /H-PMSC0R0F0 /H-PMSCXR0F0 /H-PMSL0R0F0 /H-PMSB0R0H0 /H-PMSBXR0H0 /H-PMSC0R0H0 /H-PMSCXR0H0 /H-PMSL0R0H0 /H-PMSB0R0K0 /H-PMSBXR0K0
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 10 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 10 430A or PSL-123 (Beam Bolting BS EN10 Attachment), Rod Size 10 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 12 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 12 430A or PSL-123 (Beam Bolting BS EN10 Attachment), Rod Size 12 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 16 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 16 430A or PSL-123 (Beam Bolting BS EN10 Attachment), Rod Size 16 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 20 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 20 430A or PSL-123 (Beam Bolting BS EN10 Attachment), Rod Size 20 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 24 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 24 430A or PSL-123 (Beam Bolting BS EN10 Attachment), Rod Size 24 430A or PSL-126 (Inverted Bolting BS EN10 430A or Attachment), Pin Size 24 PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 30 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 30 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-133
TYPE
PBOR0
UTYP
PBOR1
36
WELDING ATTACHMENT
LUG ATTACHMENT BOLTING ATTACHMENT 42 WELDING ATTACHMENT =INVERTED =BEAM INVERTED LUG ATTACHMENT BOLTING ATTACHMENT 48 WELDING ATTACHMENT =INVERTED =BEAM INVERTED LUG ATTACHMENT BOLTING ATTACHMENT 56 WELDING ATTACHMENT =INVERTED =BEAM INVERTED LUG ATTACHMENT 64 WELDING ATTACHMENT =BEAM INVERTED LUG ATTACHMENT 72 LUG ATTACHMENT WELDING ATTACHMENT HELE 0 VAR EFFORT BM1 =INVERTED SPRING TYPE 1 RANGE V1 RANGE V2 RANGE V3 SPRING TYPE 2 RANGE V1 RANGE V2 RANGE V3
/H-PMSCXR0M0 /H-PMSB0R0P0 /H-PMSBXR0P0 /H-PMSL0R0P0 /H-PMSCXR0P0 /H-PMSB0R0R0 /H-PMSBXR0R0 /H-PMSL0R0R0 /H-PMSCXR0R0 /H-PMSB0R0T0 /H-PMSBXR0T0 /H-PMSL0R0T0 /H-PMSB0R0V0 /H-PMSBXR0V0 /H-PMSL0R0V0 /H-PMSL0R0X0 /H-PMSBXR0X0 /H-PMHX40000A1 /H-PMHX40000A2 /H-PMHX40000A3 /H-PMHX40000B1 /H-PMHX40000B2 /H-PMHX40000B3
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 30 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 36 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 36 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 42 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 42 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 48 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-126 (Inverted Bolting BS EN10 Attachment), Pin Size 48 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 56 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-122 (Beam Welding BS EN10 Attachment), Rod Size 64 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-125 (Inverted Beam Welding BS EN10 Attachment), Pin Size 72 430A or PSL-VES V1-1-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-1-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-1-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-2-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-2-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-2-BM1 (Base Mounted unset Variable Effort Support)
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-134
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX40000C1 /H-PMHX40000C2 /H-PMHX40000C3 /H-PMHX40000D1 /H-PMHX40000D2 /H-PMHX40000D3 /H-PMHX40000E1 /H-PMHX40000E2 /H-PMHX40000E3 /H-PMHX40000F1 /H-PMHX40000F2 /H-PMHX40000F3 /H-PMHX40000G1 /H-PMHX40000G2 /H-PMHX40000G3 /H-PMHX40000H1 /H-PMHX40000H2 /H-PMHX40000H3 /H-PMHX40000J1 /H-PMHX40000J2 /H-PMHX40000J3 /H-PMHX40000K1 /H-PMHX40000K2 /H-PMHX40000K3 /H-PMHX40000L1
SPRING TYPE 4
SPRING TYPE 5
SPRING TYPE 6
SPRING TYPE 7
SPRING TYPE 8
SPRING TYPE 9
SPRING TYPE 10
SPRING TYPE 11
RANGE V1
DETAIL MATERIAL PSL-VES V1-3-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-3-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-3-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-4-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-4-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-4-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-5-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-5-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-5-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-6-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-6-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-6-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-7-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-7-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-7-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-8-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-8-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-8-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-9-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V2-9-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V3-9-BM1 (Base Mounted unset Variable Effort Support) PSL-VES V1-10-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V2-10-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-10-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V1-11-BM1 (Base unset Mounted Variable Effort Support)
3-135
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX40000L2 /H-PMHX40000L3 /H-PMHX40000M1 /H-PMHX40000M2 /H-PMHX40000M3 /H-PMHX40000N1 /H-PMHX40000N2 /H-PMHX40000N3 /H-PMHX40000P1 /H-PMHX40000P2 /H-PMHX40000P3 /H-PMHX40000Q1 /H-PMHX40000Q2 /H-PMHX40000Q3 /H-PMHX40000R1 /H-PMHX40000R2 /H-PMHX40000R3 /H-PMHX40000S1
SPRING TYPE 12
SPRING TYPE 13
SPRING TYPE 14
SPRING TYPE 15
SPRING TYPE 16
SPRING TYPE 17
RANGE V1
DETAIL PSL-VES V2-11-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-11-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-12-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-12-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-12-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-13-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-13-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-13-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-14-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-14-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-14-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-15-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-15-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-15-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-16-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-16-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-16-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-17-BM1 (Base Mounted Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-136
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX40000S2 /H-PMHX40000S3 /H-PMHX40000T1 /H-PMHX40000T2 /H-PMHX40000T3 /H-PMHX40000U1 /H-PMHX40000U2 /H-PMHX40000U3 /H-PMHX40000V1 /H-PMHX40000V2 /H-PMHX40000V3 /H-PMHX40000W1 /H-PMHX40000W2 /H-PMHX40000W3 /H-PMHX40000X1 /H-PMHX40000X2 /H-PMHX40000X3 /H-PMHX40000Y1
SPRING TYPE 18
SPRING TYPE 19
SPRING TYPE 20
SPRING TYPE 21
SPRING TYPE 22
SPRING TYPE 23
RANGE V1
DETAIL PSL-VES V2-17-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-17-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-18-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-18-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-18-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-19-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-19-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-19-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-20-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-20-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-20-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-21-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-21-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-21-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-22-BM1 (Base Mounted Variable Effort Support) PSL-VES V2-22-BM1 (Base Mounted Variable Effort Support) PSL-VES V3-22-BM1 (Base Mounted Variable Effort Support) PSL-VES V1-23-BM1 (Base Mounted Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-137
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX40000Y2 /H-PMHX40000Y3 /H-PMHX40000Z1 /H-PMHX40000Z2 /H-PMHX40000Z3 /H-PMHX4000011 /H-PMHX4000012 /H-PMHX4000013 /H-PMHX4000021 /H-PMHX4000022 /H-PMHX4000023 /H-PMHX4000031 /H-PMHX4000032 /H-PMHX4000033 /H-PMHRH33BB /H-PMHRH37BB /H-PMHRH77BB /H-PMHER3RBB /H-PMHER7RBB /H-PMHRTRRBB
SPRING TYPE 24
SPRING TYPE 25
SPRING TYPE 26
SPRING TYPE 27
HANGER ROD
TYPE 3
TYPE 3 TYPE 7
DETAIL MATERIAL PSL-VES V2-23-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-23-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V1-24-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V2-24-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-24-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V1-25-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V2-25-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-25-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V1-26-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V2-26-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-26-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V1-27-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V2-27-BM1 (Base unset Mounted Variable Effort Support) PSL-VES V3-27-BM1 (Base unset Mounted Variable Effort Support) PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 8, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 8, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 8, To Suit 7/7, RH Thd 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 8, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 8, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 8 430A or Equivalent
3-138
TYPE
PBOR0
STYP SPHERICAL WASHER WELDLESS EYE NUT LOCKNUT NUT WASHER SPHERICAL CUP
TTYP
UTYP
PBOR1
10
HANGER ROD
TYPE 3
/H-PMHRH33CC /H-PMHRH34CC /H-PMHRH36CC /H-PMHRH37CC /H-PMHRH44CC /H-PMHRH46CC /H-PMHRH47CC /H-PMHRH66CC /H-PMHRH67CC /H-PMHRH77CC /H-PMHFRRRCC /H-PMHFLRRCC
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
=RH THREAD
=RH THREAD
TYPE 3
DETAIL MATERIAL PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 8 Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 8 PSL-277 (Locknut), Rod Dia 8 Carbon Steel PSL-278 (Full Nut), Rod Dia 8 Carbon Steel PSL-279 (Washer), Rod Dia 8 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 8 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 10, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 10 PSL-228A (Forged Eyebolt), Dia Forged Steel 10 PSL-230 (Eye Rod), Rod Dia 10, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 10, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 10, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 10, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 10, Thd Len 16 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 10, Thd Len 38 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 10, Thd Len 25 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 430A or Equivalent 10, Thd Len 64 PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 10, Thd Len 16 430A or Equivalent
3-139
TYPE
PBOR0
STYP
TTYP
PBOR1
TURNBUCKLE
=VARIABLE CONSTANT
CLEVIS ROD
=RH THREAD
/H-PMHUR3RCC /H-PMHUR4RCC /H-PMHUR6RCC /H-PMHUR7RCC /H-PMHRTRRCC /H-PMHD0RRCC /H-PMHC0RRCC /H-PMH10RRCC /H-PMHV0RRCC /H-PMHW0RRCC /H-PMHP0RRCC /H-PMH20RRCC /H-PMH30RRCC /H-PMH40RRCC /H-PMH50RRCC
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 12 HANGER ROD TYPE 1 TYPE 1 TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6 TYPE 7
DETAIL MATERIAL PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 10, Thd Len 38 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 10, Thd Len 25 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 10, Thd Len 64 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 10 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 10 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 10, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 10, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 10, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 10, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 10 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 10 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 10 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 10 Steel PSL-238 (Clevis), Rod Size 10 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 10 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 10 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 10 Carbon Steel PSL-278 (Full Nut), Rod Dia 10 Carbon Steel PSL-279 (Washer), Rod Dia 10 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 10 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/6, RH Thd 430A or Equivalent BS EN10 025 Grade FE PSL-226 (Hanger Rod), Rod Dia 12, To Suit 1/7, RH Thd 430A or Equivalent
3-140
TYPE
PBOR0
STYP
TTYP TYPE Z
PBOR1
CATREF /H-PMHRHZZDD /H-PMHRHZ2DD /H-PMHRHZ3DD /H-PMHRHZ4DD /H-PMHRHZ6DD /H-PMHRHZ7DD /H-PMHRH22DD /H-PMHRH23DD /H-PMHRH24DD /H-PMHRH26DD /H-PMHRH27DD /H-PMHRH33DD /H-PMHRH34DD /H-PMHRH36DD /H-PMHRH37DD /H-PMHRH44DD /H-PMHRH46DD /H-PMHRH47DD /H-PMHRH66DD /H-PMHRH67DD /H-PMHRH77DD /H-PMHFRRRDD /H-PMHFLRRDD
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 12, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 12 PSL-228A (Forged Eyebolt), Dia Forged Steel 12 PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent
3-141
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHER4RDD /H-PMHER6RDD /H-PMHER7RDD /H-PMHELZRDD /H-PMHBR1RDD /H-PMHBR2RDD /H-PMHBR3RDD /H-PMHBR4RDD /H-PMHBR6RDD /H-PMHBR7RDD /H-PMHBL1RDD /H-PMHAR1RDD /H-PMHAR2RDD /H-PMHAR3RDD /H-PMHAR4RDD /H-PMHAR6RDD /H-PMHAR7RDD /H-PMHAL1RDD /H-PMHTBRRDD /H-PMHTRRRDD
TYPE 1
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 12, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 181 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 107 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 18 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 39 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 25 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 67 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 12, Thd Len 181 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 181 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 107 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 18 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 39 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 25 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 12, Thd Len 67 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 12, Thd Len 181 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 12 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 12 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS EN10 025 Grade FE 12, To Suit 3, RH Thd 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent
3-142
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHUR6RDD /H-PMHUR7RDD /H-PMHULZRDD /H-PMHX1RRDDA1 /H-PMHX1RRDDA2 /H-PMHX1RRDDA3 /H-PMHX1RRDDB1 /H-PMHX1RRDDB2 /H-PMHX1RRDDB3 /H-PMHX1RRDDC1 /H-PMHX1RRDDC2 /H-PMHX1RRDDC3 /H-PMHX1RRDDD1 /H-PMHX1RRDDD2 /H-PMHX1RRDDD3 /H-PMHX1RRDDE1 /H-PMHX1RRDDE2 /H-PMHX1RRDDE3
SPRING TYPE 2
SPRING TYPE 3
SPRING TYPE 4
SPRING TYPE 5
DETAIL MATERIAL PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 12, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-1-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-1-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-1-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-2-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-2-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-2-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-3-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-3-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-3-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-4-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-4-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-4-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-5-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-5-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-5-TS1 (Top unset Suspended Variable Effort Support)
3-143
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX1RRDDF1 /H-PMHX1RRDDF2 /H-PMHX1RRDDF3 /H-PMHX1RRDDG1 /H-PMHX1RRDDG2 /H-PMHX1RRDDG3 /H-PMHX1RRDDH1 /H-PMHX1RRDDH2 /H-PMHX1RRDDH3 /H-PMHX1RRDDJ1 /H-PMHX1RRDDJ2 /H-PMHX1RRDDJ3 /H-PMHX1RRDDK1 /H-PMHX1RRDDK2 /H-PMHX1RRDDK3 /H-PMHX1RRDDL1 /H-PMHX1RRDDL2 /H-PMHX1RRDDL3
SPRING TYPE 7
SPRING TYPE 8
SPRING TYPE 9
SPRING TYPE 10
SPRING TYPE 11
DETAIL PSL-VES V1-6-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-6-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-6-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-7-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-7-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-7-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-8-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-8-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-8-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-9-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-9-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-9-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-10-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-10-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-10-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-11-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-11-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-11-TS1 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-144
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX1RRDDM1 /H-PMHX1RRDDM2 /H-PMHX1RRDDM3 /H-PMHX1RRDDN1 /H-PMHX1RRDDN2 /H-PMHX1RRDDN3 /H-PMHX1RRDDP1 /H-PMHX1RRDDP2 /H-PMHX1RRDDP3 /H-PMHX1RRDDQ1 /H-PMHX1RRDDQ2 /H-PMHX1RRDDQ3 /H-PMHX2RRDDA1 /H-PMHX2RRDDA2 /H-PMHX2RRDDA3 /H-PMHX2RRDDB1 /H-PMHX2RRDDB2 /H-PMHX2RRDDB3
SPRING TYPE 13
SPRING TYPE 14
SPRING TYPE 15
SPRING TYPE 1
SPRING TYPE 2
DETAIL PSL-VES V1-12-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-12-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-12-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-13-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-13-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-13-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-14-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-14-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-14-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-15-TS1 (Top Suspended Variable Effort Support) PSL-VES V2-15-TS1 (Top Suspended Variable Effort Support) PSL-VES V3-15-TS1 (Top Suspended Variable Effort Support) PSL-VES V1-1-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-1-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-1-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-2-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-2-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-2-TS2 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-145
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX2RRDDC1 /H-PMHX2RRDDC2 /H-PMHX2RRDDC3 /H-PMHX2RRDDD1 /H-PMHX2RRDDD2 /H-PMHX2RRDDD3 /H-PMHX2RRDDE1 /H-PMHX2RRDDE2 /H-PMHX2RRDDE3 /H-PMHX2RRDDF1 /H-PMHX2RRDDF2 /H-PMHX2RRDDF3 /H-PMHX2RRDDG1 /H-PMHX2RRDDG2 /H-PMHX2RRDDG3 /H-PMHX2RRDDH1 /H-PMHX2RRDDH2 /H-PMHX2RRDDH3
SPRING TYPE 4
SPRING TYPE 5
SPRING TYPE 6
SPRING TYPE 7
SPRING TYPE 8
DETAIL PSL-VES V1-3-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-3-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-3-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-4-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-4-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-4-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-5-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-5-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-5-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-6-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-6-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-6-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-7-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-7-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-7-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-8-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-8-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-8-TS2 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-146
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX2RRDDJ1 /H-PMHX2RRDDJ2 /H-PMHX2RRDDJ3 /H-PMHX2RRDDK1 /H-PMHX2RRDDK2 /H-PMHX2RRDDK3 /H-PMHX2RRDDL1 /H-PMHX2RRDDL2 /H-PMHX2RRDDL3 /H-PMHX2RRDDM1 /H-PMHX2RRDDM2 /H-PMHX2RRDDM3 /H-PMHX2RRDEN1 /H-PMHX2RRDDN2 /H-PMHX2RRDDN3 /H-PMHX2RRDEP1 /H-PMHX2RRDDP2 /H-PMHX2RRDDP3
SPRING TYPE 10
SPRING TYPE 11
SPRING TYPE 12
SPRING TYPE 13
SPRING TYPE 14
DETAIL PSL-VES V1-9-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-9-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-9-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-10-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-10-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-10-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-11-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-11-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-11-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-12-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-12-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-12-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-13-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-13-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-13-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-14-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-14-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-14-TS2 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-147
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX2RRDEQ1 /H-PMHX2RRDDQ2 /H-PMHX2RRDDQ3 /H-PMHX3RRDDA1 /H-PMHX3RRDDA2 /H-PMHX3RRDDA3 /H-PMHX3RRDDB1 /H-PMHX3RRDDB2 /H-PMHX3RRDDB3 /H-PMHX3RRDDC1 /H-PMHX3RRDDC2 /H-PMHX3RRDDC3 /H-PMHX3RRDDD1 /H-PMHX3RRDDD2 /H-PMHX3RRDDD3 /H-PMHX3RRDDE1 /H-PMHX3RRDDE2 /H-PMHX3RRDDE3
SPRING TYPE 1
SPRING TYPE 2
SPRING TYPE 3
SPRING TYPE 4
SPRING TYPE 5
DETAIL PSL-VES V1-15-TS2 (Top Suspended Variable Effort Support) PSL-VES V2-15-TS2 (Top Suspended Variable Effort Support) PSL-VES V3-15-TS2 (Top Suspended Variable Effort Support) PSL-VES V1-1-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-1-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-1-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-2-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-2-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-2-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-3-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-3-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-3-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-4-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-4-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-4-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-5-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-5-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-5-TS3 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-148
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX3RRDDF1 /H-PMHX3RRDDF2 /H-PMHX3RRDDF3 /H-PMHX3RRDDG1 /H-PMHX3RRDDG2 /H-PMHX3RRDDG3 /H-PMHX3RRDDH1 /H-PMHX3RRDDH2 /H-PMHX3RRDDH3 /H-PMHX3RRDDJ1 /H-PMHX3RRDDJ2 /H-PMHX3RRDDJ3 /H-PMHX3RRDDK1 /H-PMHX3RRDDK2 /H-PMHX3RRDDK3 /H-PMHX3RRDDL1 /H-PMHX3RRDDL2 /H-PMHX3RRDDL3
SPRING TYPE 7
SPRING TYPE 8
SPRING TYPE 9
SPRING TYPE 10
SPRING TYPE 11
DETAIL PSL-VES V1-6-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-6-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-6-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-7-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-7-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-7-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-8-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-8-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-8-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-9-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-9-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-9-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-10-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-10-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-10-TS3 (Top Suspended Variable Effort Support) PSL-VES V1-11-TS3 (Top Suspended Variable Effort Support) PSL-VES V2-11-TS3 (Top Suspended Variable Effort Support) PSL-VES V3-11-TS3 (Top Suspended Variable Effort Support)
MATERIAL unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
3-149
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHX3RRDDM1 /H-PMHX3RRDDM2 /H-PMHX3RRDDM3 /H-PMHX3RRDEN1 /H-PMHX3RRDDN2 /H-PMHX3RRDDN3 /H-PMHX3RRDEP1 /H-PMHX3RRDDP2 /H-PMHX3RRDDP3 /H-PMHX3RRDEQ1 /H-PMHX3RRDDQ2 /H-PMHX3RRDDQ3 /H-PMHRTRRDD /H-PMHD0RRDD /H-PMHC0RRDD /H-PMH10RRDD /H-PMHV0RRDD /H-PMHW0RRDD /H-PMHP0RRDD /H-PMH20RRDD /H-PMH30RRDD /H-PMH40RRDD /H-PMH50RRDD
SPRING TYPE 13
SPRING TYPE 14
SPRING TYPE 15
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP
DETAIL MATERIAL PSL-VES V1-12-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-12-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-12-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-13-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-13-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-13-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-14-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-14-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-14-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-15-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-15-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-15-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 12 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 12 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 12 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 12 Steel PSL-238 (Clevis), Rod Size 12 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 12 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 12 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 12 Carbon Steel PSL-278 (Full Nut), Rod Dia 12 Carbon Steel PSL-279 (Washer), Rod Dia 12 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 12 Steel
3-150
TYPE
PBOR0 16
TTYP TYPE 1
PBOR1
CATREF /H-PMHRH11EE /H-PMHRH1ZEE /H-PMHRH12EE /H-PMHRH13EE /H-PMHRH14EE /H-PMHRH16EE /H-PMHRH17EE /H-PMHRHZZEE /H-PMHRHZ2EE /H-PMHRHZ3EE /H-PMHRHZ4EE /H-PMHRHZ6EE /H-PMHRHZ7EE /H-PMHRH22EE /H-PMHRH23EE /H-PMHRH24EE /H-PMHRH26EE /H-PMHRH27EE /H-PMHRH33EE /H-PMHRH34EE /H-PMHRH36EE /H-PMHRH37EE /H-PMHRH44EE /H-PMHRH46EE /H-PMHRH47EE /H-PMHRH66EE /H-PMHRH67EE /H-PMHRH77EE
TYPE Z
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/1, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/1, RH/LH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/2, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/3, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/4, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/6, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/7, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/1, LH/LH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/2, LH/RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/3, LH/RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/4, LH/RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/6, LH/RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 1/7, LH/RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 2/2, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 2/3, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 2/4, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 2/6, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 2/7, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 3/3, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 3/4, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 3/6, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 3/7, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 4/4, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 4/6, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 430A or 16, To Suit 4/7, RH Thd PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 6/6, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 6/7, RH Thd 430A or PSL-226 (Hanger Rod), Rod Dia BS EN10 16, To Suit 7/7, RH Thd 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-151
TYPE
PBOR0
UTYP
PBOR1
EYE ROD
=RH THREAD
/H-PMHER1REE /H-PMHER2REE /H-PMHER3REE /H-PMHER4REE /H-PMHER6REE /H-PMHER7REE /H-PMHELZREE /H-PMHBR1REE /H-PMHBR2REE /H-PMHBR3REE /H-PMHBR4REE /H-PMHBR6REE /H-PMHBR7REE /H-PMHBL1REE /H-PMHAR1REE /H-PMHAR2REE /H-PMHAR3REE /H-PMHAR4REE /H-PMHAR6REE /H-PMHAR7REE /H-PMHAL1REE /H-PMHTBRREE
TYPE 1
DETAIL MATERIAL PSL-228 (Forged Eyebolt), Dia Forged Steel 16 PSL-228A (Forged Eyebolt), Dia Forged Steel 16 PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 16, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 184 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 110 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 18 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 40 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 25 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 71 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 16, Thd Len 184 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 184 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 110 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 18 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 40 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 25 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 16, Thd Len 71 430A or Equivalent BS EN10 025 Grade FE PSL-232A (Bent Eye Rod Welded), Dia 16, Thd Len 184 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 16
3-152
TYPE
PBOR0
PBOR1
CATREF /H-PMHTRRREE /H-PMHUR1REE /H-PMHUR2REE /H-PMHUR3REE /H-PMHUR4REE /H-PMHUR6REE /H-PMHUR7REE /H-PMHULZREE /H-PMHX1RREER1 /H-PMHX1RREER2 /H-PMHX1RREER3 /H-PMHX1RREES1 /H-PMHX1RREES2 /H-PMHX1RREES3 /H-PMHX1RREET1 /H-PMHX1RREET2 /H-PMHX1RREET3 /H-PMHX2RREFR1 /H-PMHX2RREER2
SPRING TYPE 17
SPRING TYPE 18
SPRING TYPE 16
RANGE V1 RANGE V2
DETAIL MATERIAL PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 16 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 16, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-16-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-16-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-16-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-17-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-17-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-17-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-18-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-18-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-18-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-16-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-16-TS2 (Top unset Suspended Variable Effort Support)
3-153
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX2RREER3 /H-PMHX2RREFS1 /H-PMHX2RREES2 /H-PMHX2RREES3 /H-PMHX2RREFT1 /H-PMHX2RREET2 /H-PMHX2RREET3 /H-PMHX3RREFR1 /H-PMHX3RREER2 /H-PMHX3RREER3 /H-PMHX3RREFS1 /H-PMHX3RREES2 /H-PMHX3RREES3 /H-PMHX3RREFT1 /H-PMHX3RREET2 /H-PMHX3RREET3 /H-PMHRTRREE /H-PMHD0RREE /H-PMHC0RREE /H-PMH10RREE
SPRING TYPE 17
SPRING TYPE 18
SPRING TYPE 16
SPRING TYPE 17
SPRING TYPE 18
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER
DETAIL MATERIAL PSL-VES V3-16-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-17-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-17-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-17-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-18-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-18-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-18-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-16-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-16-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-16-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-17-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-17-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-17-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-18-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-18-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-18-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 16 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 16 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 16 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 16 Steel
3-154
TYPE
PBOR0
STYP CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP
TTYP
UTYP
PBOR1
(Clevis), Rod Size 16 (Weldless Eye Nut), 16 (Clevis Pin), Rod Dia
MATERIAL Carbon Steel Forged Steel BS EN10 025 Grade FE 510B, BS 970 Grade 080M40 or Equivalent Carbon Steel Carbon Steel Carbon Steel Cast Iron/Carbon Steel BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE 430A or Equivalent
20
HANGER ROD
TYPE 1
/H-PMHRH11FF /H-PMHRH1ZFF /H-PMHRH12FF /H-PMHRH13FF /H-PMHRH14FF /H-PMHRH16FF /H-PMHRH17FF /H-PMHRHZZFF /H-PMHRHZ2FF /H-PMHRHZ3FF /H-PMHRHZ4FF /H-PMHRHZ6FF /H-PMHRHZ7FF /H-PMHRH22FF /H-PMHRH23FF /H-PMHRH24FF /H-PMHRH26FF /H-PMHRH27FF /H-PMHRH33FF /H-PMHRH34FF /H-PMHRH36FF /H-PMHRH37FF
TYPE Z
TYPE 2
TYPE 3
PSL-277 (Locknut), Rod Dia 16 PSL-278 (Full Nut), Rod Dia 16 PSL-279 (Washer), Rod Dia 16 PSL-280 (Spherical Cup), Rod Size 16 PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/1, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/1, RH/LH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/2, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/3, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/4, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/6, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/7, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/1, LH/LH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/2, LH/RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/3, LH/RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/4, LH/RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/6, LH/RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 1/7, LH/RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 2/2, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 2/3, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 2/4, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 2/6, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 2/7, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 3/3, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 3/4, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 3/6, RH Thd PSL-226 (Hanger Rod), Rod Dia 20, To Suit 3/7, RH Thd
3-155
TYPE
PBOR0
STYP
TTYP TYPE 4
PBOR1
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
/H-PMHER1RFF /H-PMHER2RFF /H-PMHER3RFF /H-PMHER4RFF /H-PMHER6RFF /H-PMHER7RFF /H-PMHELZRFF /H-PMHBR1RFF /H-PMHBR2RFF /H-PMHBR3RFF /H-PMHBR4RFF /H-PMHBR6RFF /H-PMHBR7RFF /H-PMHBL1RFF /H-PMHAR1RFF /H-PMHAR2RFF
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 20, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 20 PSL-228A (Forged Eyebolt), Dia Forged Steel 20 PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 20, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 191 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 117 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 25 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 41 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 30 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 125 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 20, Thd Len 191 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 191 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 117 430A or Equivalent
3-156
TYPE
PBOR0
STYP
TTYP
PBOR1
TYPE 1
/H-PMHUR1RFF /H-PMHUR2RFF /H-PMHUR3RFF /H-PMHUR4RFF /H-PMHUR6RFF /H-PMHUR7RFF /H-PMHULZRFF /H-PMHX1RRFFU1 /H-PMHX1RRFFU2 /H-PMHX1RRFFU3 /H-PMHX2RRFHU1 /H-PMHX2RRFFU2 /H-PMHX2RRFFU3 /H-PMHX3RRFHU1
SPRING TYPE 19
SPRING TYPE 19
RANGE V1
DETAIL MATERIAL PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 25 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 41 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 30 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 20, Thd Len 125 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 20, Thd Len 191 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 20 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 20 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 20, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-19-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-19-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-19-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-19-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-19-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-19-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-19-TS3 (Top unset Suspended Variable Effort Support)
3-157
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX3RRFFU2 /H-PMHX3RRFFU3 /H-PMHRTRRFF /H-PMHD0RRFF /H-PMHC0RRFF /H-PMH10RRFF /H-PMHV0RRFF /H-PMHW0RRFF /H-PMHP0RRFF /H-PMH20RRFF /H-PMH30RRFF /H-PMH40RRFF /H-PMH50RRFF
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 24 HANGER ROD TYPE 1 TYPE 1 TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6 TYPE 7 TYPE Z TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6 TYPE 7 TYPE 2 TYPE 2 TYPE 3
/H-PMHRH11HH /H-PMHRH1ZHH /H-PMHRH12HH /H-PMHRH13HH /H-PMHRH14HH /H-PMHRH16HH /H-PMHRH17HH /H-PMHRHZZHH /H-PMHRHZ2HH /H-PMHRHZ3HH /H-PMHRHZ4HH /H-PMHRHZ6HH /H-PMHRHZ7HH /H-PMHRH22HH /H-PMHRH23HH
DETAIL MATERIAL PSL-VES V2-19-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-19-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 20 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 20 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 20 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 20 Steel PSL-238 (Clevis), Rod Size 20 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 20 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 20 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 20 Carbon Steel PSL-278 (Full Nut), Rod Dia 20 Carbon Steel PSL-279 (Washer), Rod Dia 20 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 20 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 2/2, RH Thd 430A or Equivalent BS EN10 025 Grade FE PSL-226 (Hanger Rod), Rod Dia 24, To Suit 2/3, RH Thd 430A or Equivalent
3-158
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHRH24HH /H-PMHRH26HH /H-PMHRH27HH /H-PMHRH33HH /H-PMHRH34HH /H-PMHRH36HH /H-PMHRH37HH /H-PMHRH44HH /H-PMHRH46HH /H-PMHRH47HH /H-PMHRH66HH /H-PMHRH67HH /H-PMHRH77HH /H-PMHFRRRHH /H-PMHFLRRHH
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 24, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 24 PSL-228A (Forged Eyebolt), Dia Forged Steel 24 PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 24, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent BS EN10 025 Grade FE PSL-231 (Bent Eye Rod), Dia 24, Thd Len 199 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 125 430A or Equivalent
3-159
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHBR3RHH /H-PMHBR4RHH /H-PMHBR6RHH /H-PMHBR7RHH /H-PMHBL1RHH /H-PMHAR1RHH /H-PMHAR2RHH /H-PMHAR3RHH /H-PMHAR4RHH /H-PMHAR6RHH /H-PMHAR7RHH /H-PMHAL1RHH /H-PMHTBRRHH /H-PMHTRRRHH
TYPE 1
DETAIL MATERIAL PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 28 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 42 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 35 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 129 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 24, Thd Len 199 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 199 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 125 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 28 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 42 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 35 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 24, Thd Len 129 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 24, Thd Len 199 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 24 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 24 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 24, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-20-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-20-TS1 (Top unset Suspended Variable Effort Support)
3-160
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX1RRHHV3 /H-PMHX2RRHKV1 /H-PMHX2RRHHV2 /H-PMHX2RRHHV3 /H-PMHX3RRHKV1 /H-PMHX3RRHHV2 /H-PMHX3RRHHV3 /H-PMHY0RRHF1 /H-PMHY0RRHH2 /H-PMHY0RRHH3 /H-PMHRTRRHH /H-PMHD0RRHH /H-PMHC0RRHH /H-PMH10RRHH /H-PMHV0RRHH /H-PMHW0RRHH /H-PMHP0RRHH /H-PMH20RRHH /H-PMH30RRHH /H-PMH40RRHH /H-PMH50RRHH
SPRING TYPE 20
SPRING TYPE 20
SWAY BRACE ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 30 HANGER ROD
TYPE 1
DETAIL MATERIAL PSL-VES V3-20-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-20-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-20-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-20-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-20-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-20-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-20-TS3 (Top unset Suspended Variable Effort Support) PSL-SB1 (Sway Brace) unset PSL-SB2 (Sway Brace) unset PSL-SB3 (Sway Brace) unset PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 24 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 24 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 24 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 24 Steel PSL-238 (Clevis), Rod Size 24 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 24 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 24 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 24 Carbon Steel PSL-278 (Full Nut), Rod Dia 24 Carbon Steel PSL-279 (Washer), Rod Dia 24 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 24 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/6, RH Thd 430A or Equivalent
3-161
TYPE
PBOR0
STYP
TTYP TYPE Z
PBOR1
CATREF /H-PMHRH17KK /H-PMHRHZZKK /H-PMHRHZ2KK /H-PMHRHZ3KK /H-PMHRHZ4KK /H-PMHRHZ6KK /H-PMHRHZ7KK /H-PMHRH22KK /H-PMHRH23KK /H-PMHRH24KK /H-PMHRH26KK /H-PMHRH27KK /H-PMHRH33KK /H-PMHRH34KK /H-PMHRH36KK /H-PMHRH37KK /H-PMHRH44KK /H-PMHRH46KK /H-PMHRH47KK /H-PMHRH66KK /H-PMHRH67KK /H-PMHRH77KK /H-PMHFRRRKK /H-PMHFLRRKK
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
TYPE 1 TYPE 2
/H-PMHER1RKK /H-PMHER2RKK
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 30, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 30 PSL-228A (Forged Eyebolt), Dia Forged Steel 30 PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent
3-162
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHER3RKK /H-PMHER4RKK /H-PMHER6RKK /H-PMHER7RKK /H-PMHELZRKK /H-PMHBR1RKK /H-PMHBR2RKK /H-PMHBR3RKK /H-PMHBR4RKK /H-PMHBR6RKK /H-PMHBR7RKK /H-PMHBL1RKK /H-PMHAR1RKK /H-PMHAR2RKK /H-PMHAR3RKK /H-PMHAR4RKK /H-PMHAR6RKK /H-PMHAR7RKK /H-PMHAL1RKK /H-PMHTBRRKK /H-PMHTRRRKK
TYPE 1
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 30, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 212 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 138 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 38 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 44 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 45 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 136 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 30, Thd Len 212 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 212 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 138 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 38 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 44 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 45 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 30, Thd Len 136 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 30, Thd Len 212 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 30 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 30 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS EN10 025 Grade FE 30, To Suit 2, RH Thd 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent
3-163
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHUR4RKK /H-PMHUR6RKK /H-PMHUR7RKK /H-PMHULZRKK /H-PMHX1RRKKW1 /H-PMHX1RRKKW2 /H-PMHX1RRKKW3 /H-PMHX1RRKKX1 /H-PMHX1RRKKX2 /H-PMHX1RRKKX3 /H-PMHX2RRKMW1 /H-PMHX2RRKKW2 /H-PMHX2RRKKW3 /H-PMHX2RRKMX1 /H-PMHX2RRKKX2 /H-PMHX2RRKKX3 /H-PMHX3RRKMW1 /H-PMHX3RRKKW2
SPRING TYPE 22
SPRING TYPE 21
SPRING TYPE 22
SPRING TYPE 21
RANGE V1 RANGE V2
DETAIL MATERIAL PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 30, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-21-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-21-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-21-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-22-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-22-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-22-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-21-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-21-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-21-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-22-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-22-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-22-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-21-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-21-TS3 (Top unset Suspended Variable Effort Support)
3-164
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHX3RRKKW3 /H-PMHX3RRKMX1 /H-PMHX3RRKKX2 /H-PMHX3RRKKX3 /H-PMHRTRRKK /H-PMHD0RRKK /H-PMHC0RRKK /H-PMH10RRKK /H-PMHV0RRKK /H-PMHW0RRKK /H-PMHP0RRKK /H-PMH20RRKK /H-PMH30RRKK /H-PMH40RRKK /H-PMH50RRKK
SPRING TYPE 22
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 36 HANGER ROD TYPE 1 TYPE 1 TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6 TYPE 7 TYPE Z TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6
/H-PMHRH11MM /H-PMHRH1ZMM /H-PMHRH12MM /H-PMHRH13MM /H-PMHRH14MM /H-PMHRH16MM /H-PMHRH17MM /H-PMHRHZZMM /H-PMHRHZ2MM /H-PMHRHZ3MM /H-PMHRHZ4MM /H-PMHRHZ6MM
DETAIL MATERIAL PSL-VES V3-21-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V1-22-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-22-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-22-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 30 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 30 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 30 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 30 Steel PSL-238 (Clevis), Rod Size 30 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 30 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 30 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 30 Carbon Steel PSL-278 (Full Nut), Rod Dia 30 Carbon Steel PSL-279 (Washer), Rod Dia 30 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 30 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/6, LH/RH Thd 430A or Equivalent
3-165
TYPE
PBOR0
STYP
TTYP TYPE 2
PBOR1
CATREF /H-PMHRHZ7MM /H-PMHRH22MM /H-PMHRH23MM /H-PMHRH24MM /H-PMHRH26MM /H-PMHRH27MM /H-PMHRH33MM /H-PMHRH34MM /H-PMHRH36MM /H-PMHRH37MM /H-PMHRH44MM /H-PMHRH46MM /H-PMHRH47MM /H-PMHRH66MM /H-PMHRH67MM /H-PMHRH77MM /H-PMHFRRRMM /H-PMHFLRRMM
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 36, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 36 PSL-228A (Forged Eyebolt), Dia Forged Steel 36 PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent
3-166
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMHELZRMM /H-PMHBR1RMM /H-PMHBR2RMM /H-PMHBR3RMM /H-PMHBR4RMM /H-PMHBR6RMM /H-PMHBR7RMM /H-PMHBL1RMM /H-PMHAR1RMM /H-PMHAR2RMM /H-PMHAR3RMM /H-PMHAR4RMM /H-PMHAR6RMM /H-PMHAR7RMM /H-PMHAL1RMM /H-PMHTBRRMM /H-PMHTRRRMM
TYPE 1
LH THREAD
TYPE 1
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 36, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 226 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 152 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 38 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 55 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 55 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 143 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 36, Thd Len 226 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 226 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 152 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 38 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 55 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 55 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 36, Thd Len 143 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 36, Thd Len 226 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 36 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 36 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS EN10 025 Grade FE 36, To Suit 7, RH Thd 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 36, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent
3-167
TYPE
PBOR0
PBOR1
CATREF /H-PMHX1RRMMY1 /H-PMHX1RRMMY2 /H-PMHX1RRMMY3 /H-PMHX2RRMPY1 /H-PMHX2RRMMY2 /H-PMHX2RRMMY3 /H-PMHX3RRMPY1 /H-PMHX3RRMMY2 /H-PMHX3RRMMY3 /H-PMHY0RRMK4 /H-PMHY0RRMM5 /H-PMHY0RRMM6 /H-PMHRTRRMM /H-PMHD0RRMM /H-PMHC0RRMM /H-PMH10RRMM /H-PMHV0RRMM /H-PMHW0RRMM /H-PMHP0RRMM /H-PMH20RRMM /H-PMH30RRMM /H-PMH40RRMM /H-PMH50RRMM
SPRING TYPE 23
SPRING TYPE 23
SWAY BRACE ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 42 HANGER ROD
TYPE 1
DETAIL MATERIAL PSL-VES V1-23-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-23-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-23-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-23-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-23-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-23-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-23-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-23-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-23-TS3 (Top unset Suspended Variable Effort Support) PSL-SB4 (Sway Brace) unset PSL-SB5 (Sway Brace) unset PSL-SB6 (Sway Brace) unset PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 36 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 36 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 36 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 36 Steel PSL-238 (Clevis), Rod Size 36 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 36 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 36 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 36 Carbon Steel PSL-278 (Full Nut), Rod Dia 36 Carbon Steel PSL-279 (Washer), Rod Dia 36 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 36 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/2, RH Thd 430A or Equivalent
3-168
3-169
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHRH13PP /H-PMHRH14PP /H-PMHRH16PP /H-PMHRH17PP /H-PMHRHZZPP /H-PMHRHZ2PP /H-PMHRHZ3PP /H-PMHRHZ4PP /H-PMHRHZ6PP /H-PMHRHZ7PP /H-PMHRH22PP /H-PMHRH23PP /H-PMHRH24PP /H-PMHRH26PP /H-PMHRH27PP /H-PMHRH33PP /H-PMHRH34PP /H-PMHRH36PP /H-PMHRH37PP /H-PMHRH44PP /H-PMHRH46PP /H-PMHRH47PP /H-PMHRH66PP /H-PMHRH67PP /H-PMHRH77PP /H-PMHFRRRPP /H-PMHFLRRPP
TYPE Z
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 42, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 430A or Equivalent 42, To Suit 7/7, RH Thd PSL-228 (Forged Eyebolt), Dia Forged Steel 42 PSL-228A (Forged Eyebolt), Dia Forged Steel 42
3-170
TYPE
PBOR0
PBOR1
CATREF /H-PMHER1RPP /H-PMHER2RPP /H-PMHER3RPP /H-PMHER4RPP /H-PMHER6RPP /H-PMHER7RPP /H-PMHELZRPP /H-PMHBR1RPP /H-PMHBR2RPP /H-PMHBR3RPP /H-PMHBR4RPP /H-PMHBR6RPP /H-PMHBR7RPP /H-PMHBL1RPP /H-PMHAR1RPP /H-PMHAR2RPP /H-PMHAR3RPP /H-PMHAR4RPP /H-PMHAR6RPP /H-PMHAR7RPP /H-PMHAL1RPP /H-PMHTBRRPP /H-PMHTRRRPP
TYPE 1
TYPE 1
/H-PMHUR1RPP
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 42, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 243 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 169 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 45 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 60 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 60 430A or Equivalent PSL-231 (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 150 430A or Equivalent PSL-231A (Bent Eye Rod), Dia BS EN10 025 Grade FE 42, Thd Len 243 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 243 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 169 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 45 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 60 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 60 430A or Equivalent PSL-232 (Bent Eye Rod Welded), BS EN10 025 Grade FE Dia 42, Thd Len 150 430A or Equivalent PSL-232A (Bent Eye Rod BS EN10 025 Grade FE Welded), Dia 42, Thd Len 243 430A or Equivalent Carbon Steel PSL-235 (Turnbuckle RH/LH), Rod Size 42 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 42 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent
3-171
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHUR2RPP /H-PMHUR3RPP /H-PMHUR4RPP /H-PMHUR6RPP /H-PMHUR7RPP /H-PMHULZRPP /H-PMHX1RRPPZ1 /H-PMHX1RRPPZ2 /H-PMHX1RRPPZ3 /H-PMHX2RRPRZ1 /H-PMHX2RRPPZ2 /H-PMHX2RRPPZ3 /H-PMHX3RRPRZ1 /H-PMHX3RRPPZ2 /H-PMHX3RRPPZ3 /H-PMHRTRRPP /H-PMHD0RRPP /H-PMHC0RRPP /H-PMH10RRPP /H-PMHV0RRPP /H-PMHW0RRPP
SPRING TYPE 24
SPRING TYPE 24
ALL THREAD ROD DOUBLE BENT EYE ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT
DETAIL MATERIAL PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 42, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-24-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-24-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-24-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-24-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-24-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-24-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-24-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-24-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-24-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 42 430A or Equivalent PSL-233 (Double Bent Eye Rod), BS EN10 025 Grade FE Rod Dia 42 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 42 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 42 Steel PSL-238 (Clevis), Rod Size 42 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 42
3-172
TYPE
PBOR0
TTYP
UTYP
PBOR1
48
SB7 TYPE 1
/H-PMHY0RRPP7 /H-PMHRH11RR /H-PMHRH1ZRR /H-PMHRH12RR /H-PMHRH13RR /H-PMHRH14RR /H-PMHRH16RR /H-PMHRH17RR /H-PMHRHZZRR /H-PMHRHZ2RR /H-PMHRHZ3RR /H-PMHRHZ4RR /H-PMHRHZ6RR /H-PMHRHZ7RR /H-PMHRH22RR /H-PMHRH23RR /H-PMHRH24RR /H-PMHRH26RR /H-PMHRH27RR /H-PMHRH33RR /H-PMHRH34RR /H-PMHRH36RR /H-PMHRH37RR /H-PMHRH44RR
TYPE Z
TYPE 2
TYPE 3
TYPE 4
TYPE 4
DETAIL MATERIAL PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 42 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 42 Carbon Steel PSL-278 (Full Nut), Rod Dia 42 Carbon Steel PSL-279 (Washer), Rod Dia 42 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 42 Steel PSL-SB7 (Sway Brace) unset PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 3/4, RH Thd 430A or Equivalent BS EN10 025 Grade FE PSL-226 (Hanger Rod), Rod Dia 48, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 4/4, RH Thd 430A or Equivalent
3-173
TYPE
PBOR0
STYP
TTYP
PBOR1
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
TYPE 1
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 48, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 48 PSL-228A (Forged Eyebolt), Dia Forged Steel 48 PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 48, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 48 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 48 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent
3-174
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHUR7RRR /H-PMHULZRRR /H-PMHX1RRRR11 /H-PMHX1RRRR12 /H-PMHX1RRRR13 /H-PMHX2RRRT11 /H-PMHX2RRRR12 /H-PMHX2RRRR13 /H-PMHX3RRRT11 /H-PMHX3RRRR12 /H-PMHX3RRRR13 /H-PMHRTRRRR /H-PMHC0RRRR /H-PMH10RRRR /H-PMHV0RRRR /H-PMHW0RRRR /H-PMHP0RRRR /H-PMH20RRRR /H-PMH30RRRR /H-PMH40RRRR /H-PMH50RRRR
SPRING TYPE 25
SPRING TYPE 25
ALL THREAD ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 56 SWAY BRACE HANGER ROD SB8 TYPE 1 TYPE 1 TYPE Z
DETAIL MATERIAL PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 48, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-25-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-25-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-25-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-25-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-25-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-25-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-25-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-25-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-25-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 48 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 48 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 48 Steel PSL-238 (Clevis), Rod Size 48 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 48 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 48 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 48 Carbon Steel PSL-278 (Full Nut), Rod Dia 48 Carbon Steel PSL-279 (Washer), Rod Dia 48 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 48 Steel PSL-SB8 (Sway Brace) unset PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/1, RH/LH Thd 430A or Equivalent
3-175
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHRH12TT /H-PMHRH13TT /H-PMHRH14TT /H-PMHRH16TT /H-PMHRH17TT /H-PMHRHZZTT /H-PMHRHZ2TT /H-PMHRHZ3TT /H-PMHRHZ4TT /H-PMHRHZ6TT /H-PMHRHZ7TT /H-PMHRH22TT /H-PMHRH23TT /H-PMHRH24TT /H-PMHRH26TT /H-PMHRH27TT /H-PMHRH33TT /H-PMHRH34TT /H-PMHRH36TT /H-PMHRH37TT /H-PMHRH44TT /H-PMHRH46TT /H-PMHRH47TT /H-PMHRH66TT /H-PMHRH67TT /H-PMHRH77TT /H-PMHFRRRTT /H-PMHFLRRTT
TYPE Z
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/3, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 430A or Equivalent 56, To Suit 6/7, RH Thd PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 56, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 56 PSL-228A (Forged Eyebolt), Dia Forged Steel 56
3-176
TYPE
PBOR0
PBOR1
CATREF /H-PMHER1RTT /H-PMHER2RTT /H-PMHER3RTT /H-PMHER4RTT /H-PMHER6RTT /H-PMHER7RTT /H-PMHELZRTT /H-PMHTBRRTT /H-PMHTRRRTT
TYPE 1
/H-PMHUR1RTT /H-PMHUR2RTT /H-PMHUR3RTT /H-PMHUR4RTT /H-PMHUR6RTT /H-PMHUR7RTT /H-PMHULZRTT /H-PMHX1RRTT21 /H-PMHX1RRTT22 /H-PMHX1RRTT23
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 56, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 56 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 56 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 56, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-26-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-26-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-26-TS1 (Top unset Suspended Variable Effort Support)
3-177
TYPE
PBOR0
PBOR1
CATREF /H-PMHX2RRTV21 /H-PMHX2RRTT22 /H-PMHX2RRTT23 /H-PMHX3RRTV21 /H-PMHX3RRTT22 /H-PMHX3RRTT23 /H-PMHRTRRTT /H-PMHC0RRTT /H-PMH10RRTT /H-PMHV0RRTT /H-PMHW0RRTT /H-PMHP0RRTT /H-PMH20RRTT /H-PMH30RRTT /H-PMH40RRTT /H-PMH50RRTT
SPRING TYPE 26
ALL THREAD ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 64 HANGER ROD TYPE 1 TYPE 1 TYPE Z TYPE 2 TYPE 3 TYPE 4 TYPE 6 TYPE 7 TYPE Z TYPE Z TYPE 2 TYPE 3
/H-PMHRH11VV /H-PMHRH1ZVV /H-PMHRH12VV /H-PMHRH13VV /H-PMHRH14VV /H-PMHRH16VV /H-PMHRH17VV /H-PMHRHZZVV /H-PMHRHZ2VV /H-PMHRHZ3VV
DETAIL MATERIAL PSL-VES V1-26-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-26-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-26-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-26-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-26-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V3-26-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 56 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 56 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 56 Steel PSL-238 (Clevis), Rod Size 56 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 56 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 56 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 56 Carbon Steel PSL-278 (Full Nut), Rod Dia 56 Carbon Steel PSL-279 (Washer), Rod Dia 56 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 56 Steel PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/1, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/1, RH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/1, LH/LH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/2, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/3, LH/RH Thd 430A or Equivalent
3-178
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMHRHZ4VV /H-PMHRHZ6VV /H-PMHRHZ7VV /H-PMHRH22VV /H-PMHRH23VV /H-PMHRH24VV /H-PMHRH26VV /H-PMHRH27VV /H-PMHRH33VV /H-PMHRH34VV /H-PMHRH36VV /H-PMHRH37VV /H-PMHRH44VV /H-PMHRH46VV /H-PMHRH47VV /H-PMHRH66VV /H-PMHRH67VV /H-PMHRH77VV /H-PMHFRRRVV /H-PMHFLRRVV
TYPE 2
TYPE 3
TYPE 4
TYPE 6
TYPE 6 TYPE 7
TYPE 7 FORGED EYEBOLT =RH THREAD LH THREAD EYE ROD =RH THREAD
TYPE 7
DETAIL MATERIAL PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/4, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/6, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 1/7, LH/RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 2/2, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 2/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 2/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 2/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 2/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 3/3, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 3/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 3/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 3/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 4/4, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 4/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 4/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 6/6, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 6/7, RH Thd 430A or Equivalent PSL-226 (Hanger Rod), Rod Dia BS EN10 025 Grade FE 64, To Suit 7/7, RH Thd 430A or Equivalent PSL-228 (Forged Eyebolt), Dia Forged Steel 64 PSL-228A (Forged Eyebolt), Dia Forged Steel 64 PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent
3-179
TYPE
PBOR0
STYP
TTYP
PBOR1
/H-PMHUR1RVV /H-PMHUR2RVV /H-PMHUR3RVV /H-PMHUR4RVV /H-PMHUR6RVV /H-PMHUR7RVV /H-PMHULZRVV /H-PMHX1RRVV31 /H-PMHX1RRVV32 /H-PMHX1RRVV33 /H-PMHX2RRVX31 /H-PMHX2RRVV32 /H-PMHX2RRVV33 /H-PMHX3RRVX31 /H-PMHX3RRVV32
SPRING TYPE 27
SPRING TYPE 27
RANGE V1 RANGE V2
DETAIL MATERIAL PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-230 (Eye Rod), Rod Dia 64, Forged Steel and BS To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-235 (Turnbuckle RH/LH), Carbon Steel Rod Size 64 PSL-235A (Turnbuckle RH/RH), Carbon Steel Rod Size 64 PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 1, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 2, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 3, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 4, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 6, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 7, RH Thd EN10 025 Grade FE 430A or Equivalent PSL-273 (Clevis Rod), Rod Dia Carbon Steel and BS 64, To Suit 1, LH Thd EN10 025 Grade FE 430A or Equivalent PSL-VES V1-27-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V2-27-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V3-27-TS1 (Top unset Suspended Variable Effort Support) PSL-VES V1-27-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V2-27-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V3-27-TS2 (Top unset Suspended Variable Effort Support) PSL-VES V1-27-TS3 (Top unset Suspended Variable Effort Support) PSL-VES V2-27-TS3 (Top unset Suspended Variable Effort Support)
3-180
TYPE
PBOR0
STYP
TTYP
UTYP RANGE V3
PBOR1
CATREF /H-PMHX3RRVV33 /H-PMHRTRRVV /H-PMHC0RRVV /H-PMH10RRVV /H-PMHV0RRVV /H-PMHW0RRVV /H-PMHP0RRVV /H-PMH20RRVV /H-PMH30RRVV /H-PMH40RRVV /H-PMH50RRVV /H-PMH10RRXX /H-PMH50RRXX
ALL THREAD ROD COUPLING SPHERICAL WASHER CLEVIS WELDLESS EYE NUT CLEVIS PIN LOCKNUT NUT WASHER SPHERICAL CUP 72 SPHERICAL WASHER SPHERICAL CUP PCLA 15 3 BOLT PIPE CLIP =HEAVY SERIES =TEMP RANGE J
/H-PMPQJPRAC
TEMP RANGE L ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP 2 BOLT PIPE CLIP CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP =LIGHT SERIES =TEMP RANGE H =TEMP RANGE M
/H-PMPQLPRAC /H-PMP5NPRAD /H-PMP5GPRAD /H-PMP5MPRAD /H-PMPUPPRAB /H-PMPURPRAA /H-PMPUQPRAB /H-PMP2HPRAC /H-PMPL0PRAA /H-PMPM0PRAC /H-PMPS0P0A0 /H-PMPH0P0A0
DETAIL MATERIAL PSL-VES V3-27-TS3 (Top unset Suspended Variable Effort Support) PSL-227 (All Thread Rod), Dia BS EN10 025 Grade FE 64 430A or Equivalent PSL-234 (Rod Coupling), Rod Carbon Steel Dia 64 PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 64 Steel PSL-238 (Clevis), Rod Size 64 Carbon Steel PSL-239 (Weldless Eye Nut), Forged Steel Rod Dia 64 PSL-274 (Clevis Pin), Rod Dia BS EN10 025 Grade FE 64 510B, BS 970 Grade 080M40 or Equivalent PSL-277 (Locknut), Rod Dia 64 Carbon Steel PSL-278 (Full Nut), Rod Dia 64 Carbon Steel PSL-279 (Washer), Rod Dia 64 Carbon Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 64 Steel PSL-236 (Spherical Washer), Cast Iron/Carbon Rod Size 72 Steel PSL-280 (Spherical Cup), Rod Cast Iron/Carbon Size 72 Steel PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 15, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 15, Heavy Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 15 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 15 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 15, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 15 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 15 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 15 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 15, Heavy 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 15 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 15 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 15 430A or Equivalent BS EN10 025 Grade FE PSL-347 (Hold Down Pipe Clamp), Pipe Size 15 430A or Equivalent
3-181
TYPE
PBOR0
TTYP TUBE
UTYP
PBOR1 8 10 12 16 20 24
20
=HEAVY SERIES
=TEMP RANGE J
TEMP RANGE L ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT =NO SPACER SPACER UPRIGHT =NO SPACER SPACER ROUND =NO SPACER SPACER PIPE BASE LIGHT DUTY HEAVY DUTY PIPE CLIP BASE LIGHT DUTY HEAVY DUTY PIPE CLAMP ASSY =SHORT 1 POINT =TEMP RANGE M
/H-PMPQLPRBC /H-PMP5NPRBD /H-PMP5GPRBD /H-PMP5MPRBD /H-PMPUPPRBB /H-PMPURPRBA /H-PMPUQPRBB /H-PMPW0P0B0 /H-PMPWSP0B0 /H-PMPX0P0B0 /H-PMPXSP0B0 /H-PMPY0P0B0 /H-PMPYSP0B0 /H-PMPBEP0B0 /H-PMPBFP0B0 /H-PMPCEP0B0 /H-PMPCFP0B0 /H-PMPDTP0B0
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 20, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 20, Heavy Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 20 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 20 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 20, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 20 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 20 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 20 430A or Equivalent PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 20 430A or Equivalent PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 20 430A or Equivalent PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 20 430A or Equivalent PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 20 430A or Equivalent PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 20 430A or Equivalent PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 20 316S31/S33 or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 20 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 20 430A or Equivalent BS EN10 025 Grade FE PSL-351 (Pipe Clip Base Light Duty), Pipe Size 20 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 20 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 20 430A or Equivalent
3-182
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMPDUP0B0 /H-PMPDVP0B0 /H-PMPDWP0B0 /H-PMPETP0B0 /H-PMPEUP0B0 /H-PMPEVP0B0 /H-PMPEWP0B0 /H-PMP2HPRBC /H-PMPL0PRBA /H-PMPM0PRBC /H-PMPS0P0B0 /H-PMPH0P0B0
TALL
2 BOLT PIPE CLIP CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP PIPE LUG
=HEAVY SERIES
=TEMP RANGE H
TUBE
8 10 12 16 20 24 30
25
=HEAVY SERIES
=TEMP RANGE J
TEMP RANGE L LIGHT SERIES ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE L =TEMP RANGE N TEMP RANGE G LIGHT SERIES =TEMP RANGE M
DETAIL MATERIAL PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 20 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 20 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 20 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 20 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 20 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 20 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 20 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 20, Heavy 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 20 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 20 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 20 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 25, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 25, Heavy Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 25, Light Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 25 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 25 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 25, Light
3-183
TYPE
PBOR0
STYP U BOLT
UTYP
PBOR1
WELDED OVERSTRAP
FLAT
/H-PMPW0P0C0 /H-PMPWSP0C0 /H-PMPX0P0C0 /H-PMPXSP0C0 /H-PMPY0P0C0 /H-PMPYSP0C0 /H-PMPBEP0C0 /H-PMPBFP0C0 /H-PMPCEP0C0 /H-PMPCFP0C0 25 25 /H-PMPT0P0C0C /H-PMPTCP0C0C /H-PMPDTP0C0 /H-PMPDUP0C0 /H-PMPDVP0C0 /H-PMPDWP0C0 /H-PMPETP0C0 /H-PMPEUP0C0 /H-PMPEVP0C0 /H-PMPEWP0C0 /H-PMP2HPRCC /H-PMPL0PRCA /H-PMPM0PRCC /H-PMPS0P0C0
UPRIGHT
ROUND
PIPE BASE
TUBULAR BASE
TUBE BEND
=SHORT
TALL
2 BOLT PIPE CLIP CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP
=HEAVY SERIES
=TEMP RANGE H
DETAIL MATERIAL PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 25 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 25 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 25 430A or Equivalent PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 25 430A or Equivalent PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 25 430A or Equivalent PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 25 430A or Equivalent PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 25 430A or Equivalent PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 25 430A or Equivalent PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 25 316S31/S33 or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 25 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 25 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 25 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 25 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 1.8kN PSL-353B (Tubular Base), SWL Carbon Steel 1.8kN PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 25 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 25 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 25 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 25 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 25 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 25 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 25 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 25 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 25, Heavy 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 25 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE 430A or Equivalent Pipe Size 25 PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 25 430A or Equivalent
3-184
TYPE
PBOR0
UTYP
PBOR1
CATREF /H-PMPH0P0C0
8 10 12 16 20 24 30 36
32
=HEAVY SERIES
=TEMP RANGE J
TEMP RANGE L LIGHT SERIES ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE L =TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT =NO SPACER SPACER UPRIGHT =NO SPACER SPACER ROUND =NO SPACER =TEMP RANGE M
DETAIL MATERIAL PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 25 430A or Equivalent /H-PMPKCP0F0-50x50x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 2.5kN 430A or Equivalent /H-PMPG4PRCB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRCC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRCD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRCE PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRCF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRCH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRCK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRCM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPQJPRDD PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 32, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPQLPRDD PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 32, Heavy Grade 400 or Equivalent /H-PMPPLPRDD PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 32, Light Grade 400 or Equivalent /H-PMP5NPRDD PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 32 /H-PMP5GPRDD PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 32 /H-PMP5MPRDD PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 32, Light /H-PMPUPPRDB PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 32 430A or Equivalent /H-PMPURPRDC PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 32 /H-PMPUQPRDB PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 32 430A or Equivalent /H-PMPW0P0D0 PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 32 430A or Equivalent /H-PMPWSP0D0 PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 32 430A or Equivalent /H-PMPX0P0D0 PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 32 430A or Equivalent /H-PMPXSP0D0 PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 32 430A or Equivalent /H-PMPY0P0D0 PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 32 430A or Equivalent
3-185
TYPE
PBOR0
STYP
TTYP
UTYP SPACER
PBOR1
PIPE BASE
TUBULAR BASE
TUBE BEND
/H-PMPT0P0D0C /H-PMPTCP0D0C /H-PMPDTP0D0 /H-PMPDUP0D0 /H-PMPDVP0D0 /H-PMPDWP0D0 /H-PMPETP0D0 /H-PMPEUP0D0 /H-PMPEVP0D0 /H-PMPEWP0D0 /H-PMP2HPRDD /H-PMPL0PRDC /H-PMPM0PRDC /H-PMPS0P0D0 /H-PMPH0P0D0
=SHORT
TALL
2 BOLT PIPE CLIP CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP PIPE LUG
=HEAVY SERIES
=TEMP RANGE H
TUBE
8 10 12 16 20 24 30
DETAIL MATERIAL PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 32 316S31/S33 or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 32 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 32 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 32 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 32 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 1.8kN PSL-353B (Tubular Base), SWL Carbon Steel 1.8kN PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 32 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 32 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 32 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 32 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 32 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 32 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 32 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 32 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 32, Heavy 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 32 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 32 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 32 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 32 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent
3-186
TYPE
PBOR0
STYP
TTYP
UTYP
PBOR1 36 42 48 56
40
=HEAVY SERIES
TEMP RANGE L LIGHT SERIES ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE L =TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT =NO SPACER SPACER UPRIGHT =NO SPACER SPACER ROUND =NO SPACER SPACER PIPE BASE LIGHT DUTY HEAVY DUTY PIPE CLIP BASE LIGHT DUTY =TEMP RANGE M
/H-PMPQLPRED /H-PMPPLPRED /H-PMP5NPREE /H-PMP5GPREE /H-PMP5MPREE /H-PMPUPPREC /H-PMPURPREC /H-PMPUQPREC /H-PMPW0P0E0 /H-PMPWSP0E0 /H-PMPX0P0E0 /H-PMPXSP0E0 /H-PMPY0P0E0 /H-PMPYSP0E0 /H-PMPBEP0E0 /H-PMPBFP0E0 /H-PMPCEP0E0
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 40, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 40 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 40, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 40, Heavy Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 40, Light Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 40 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 40 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 40, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 40 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 40 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 40 430A or Equivalent PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 40 430A or Equivalent PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 40 430A or Equivalent PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 40 430A or Equivalent PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 40 430A or Equivalent PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 40 430A or Equivalent PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 40 316S31/S33 or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE 430A or Equivalent Duty), Pipe Size 40 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 40 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 40 430A or Equivalent
3-187
TYPE
PBOR0
UTYP
PBOR1 25 40
CATREF /H-PMPCFP0E0 /H-PMPT0P0E0C /H-PMPT0P0E0E /H-PMPTCP0E0C /H-PMPTCP0E0E /H-PMPDTP0E0 /H-PMPDUP0E0 /H-PMPDVP0E0 /H-PMPDWP0E0 /H-PMPETP0E0 /H-PMPEUP0E0 /H-PMPEVP0E0 /H-PMPEWP0E0 /H-PMPL0PREC /H-PMPM0PREC /H-PMPS0P0E0 /H-PMPH0P0E0
BEND
25 40
=SHORT
TALL
CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP PIPE LUG TUBE 8 10 12 16 20 24 30 36 42 48 56
/H-PMPG4PREB /H-PMPG4PREC /H-PMPG4PRED /H-PMPG4PREE /H-PMPG4PREF /H-PMPG4PREH /H-PMPG4PREK /H-PMPG4PREM /H-PMPG4PREP /H-PMPG4PRER /H-PMPG4PRET
DETAIL MATERIAL PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 40 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 1.8kN PSL-353A (Tubular Base), SWL Carbon Steel 5.7kN PSL-353B (Tubular Base), SWL Carbon Steel 1.8kN PSL-353B (Tubular Base), SWL Carbon Steel 5.7kN PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 40 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 40 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 40 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 40 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 40 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 40 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 40 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 40 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 40 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 40 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 40 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 40 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE 430A or Equivalent Dia 48 PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent
3-188
TYPE
PBOR0 50
PBOR1 64
=HEAVY SERIES
TEMP RANGE L LIGHT SERIES ALLOY PIPE CLIP =LIGHT DUTY =TEMP RANGE L =TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT =NO SPACER SPACER UPRIGHT =NO SPACER SPACER ROUND =NO SPACER SPACER PIPE BASE LIGHT DUTY HEAVY DUTY PIPE CLIP BASE LIGHT DUTY HEAVY DUTY TUBULAR BASE TUBE 25 40 =TEMP RANGE M
/H-PMPQLPRFD /H-PMPPLPRFD /H-PMP5NPRFE /H-PMP5GPRFE /H-PMP5MPRFE /H-PMPUPPRFC /H-PMPURPRFC /H-PMPUQPRFC /H-PMPW0P0F0 /H-PMPWSP0F0 /H-PMPX0P0F0 /H-PMPXSP0F0 /H-PMPY0P0F0 /H-PMPYSP0F0 /H-PMPBEP0F0 /H-PMPBFP0F0 /H-PMPCEP0F0 /H-PMPCFP0F0 /H-PMPT0P0F0C /H-PMPT0P0F0E
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 50, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 50 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 50, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 50, Heavy Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 50, Light Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 50 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 50 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 50, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 50 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 50 430A or Equivalent PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 50 430A or Equivalent PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 50 430A or Equivalent PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 50 430A or Equivalent PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 50 430A or Equivalent PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 50 430A or Equivalent PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 50 316S31/S33 or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 50 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 50 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 50 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE 430A or Equivalent Duty), Pipe Size 50 PSL-353A (Tubular Base), SWL Carbon Steel 1.8kN PSL-353A (Tubular Base), SWL Carbon Steel 5.7kN
3-189
TYPE
PBOR0
STYP
TTYP BEND
UTYP
PBOR1 50 25 40 50
PIPE LUG
/H-PMPG4PRFB /H-PMPG4PRFC /H-PMPG4PRFD /H-PMPG4PRFE /H-PMPG4PRFF /H-PMPG4PRFH /H-PMPG4PRFK /H-PMPG4PRFM /H-PMPG4PRFP /H-PMPG4PRFR /H-PMPG4PRFT /H-PMPG4PRFV /H-PMPG4PRFX /H-PMPDTP0F0 /H-PMPDUP0F0 /H-PMPDVP0F0 /H-PMPDWP0F0 /H-PMPETP0F0 /H-PMPEUP0F0 /H-PMPEVP0F0 /H-PMPEWP0F0
=SHORT
TALL
DETAIL MATERIAL PSL-353A (Tubular Base), SWL Carbon Steel 6.9kN PSL-353B (Tubular Base), SWL Carbon Steel 1.8kN PSL-353B (Tubular Base), SWL Carbon Steel 5.7kN PSL-353B (Tubular Base), SWL Carbon Steel 6.9kN PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 50 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 50 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 50 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 50 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 50 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 50 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 50 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 50 430A or Equivalent
3-190
TYPE
PBOR0
STYP CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP
TTYP
UTYP
PBOR1
ANCH HOLD DOWN CLAMP 65 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
/H-PMPPLPRGD /H-PMPQJPRGE
TEMP RANGE L ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP NON GRIP PIPE BASE LIGHT DUTY HEAVY DUTY PIPE CLIP BASE LIGHT DUTY HEAVY DUTY TUBULAR BASE TUBE 40 50 TEMP RANGE M
/H-PMPQLPRGE /H-PMP5NPRGE /H-PMP5GPRGE /H-PMP5MPRGE /H-PMPUPPRGD /H-PMPUQPRGD /H-PMPBEP0G0 /H-PMPBFP0G0 /H-PMPCEP0G0 /H-PMPCFP0G0 /H-PMPT0P0G0E /H-PMPT0P0G0F
DETAIL MATERIAL PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 50 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 50 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 50 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 50 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 65, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 65, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 65 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 65, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 65, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 65, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 65, Heavy Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 65 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 65 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 65, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 65 430A or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 65 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 65 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE 430A or Equivalent Duty), Pipe Size 65 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 65 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 5.7kN PSL-353A (Tubular Base), SWL Carbon Steel 6.9kN
3-191
TYPE
PBOR0
STYP
TTYP BEND
UTYP
PBOR1 40 50
PIPE LUG
/H-PMPG4PRGB /H-PMPG4PRGC /H-PMPG4PRGD /H-PMPG4PRGE /H-PMPG4PRGF /H-PMPG4PRGH /H-PMPG4PRGK /H-PMPG4PRGM /H-PMPG4PRGP /H-PMPG4PRGR /H-PMPG4PRGT /H-PMPG4PRGV /H-PMPG4PRGX /H-PMPDTP0G0 /H-PMPDUP0G0 /H-PMPDVP0G0 /H-PMPDWP0G0 /H-PMPETP0G0 /H-PMPEUP0G0 /H-PMPEVP0G0 /H-PMPEWP0G0 /H-PMPL0PRGD /H-PMPM0PRGD
=SHORT
TALL
DETAIL MATERIAL PSL-353B (Tubular Base), SWL Carbon Steel 5.7kN PSL-353B (Tubular Base), SWL Carbon Steel 6.9kN PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 65 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 65 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 65 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 65 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 65 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 65 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 65 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 65 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 65 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent
3-192
TYPE
PBOR0
TTYP
UTYP
PBOR1
CATREF /H-PMPS0P0G0
50x50x8RSA
ANCH HOLD DOWN CLAMP 80 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
TEMP RANGE L ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT =NO SPACER SPACER UPRIGHT =NO SPACER SPACER ROUND =NO SPACER TEMP RANGE M
DETAIL MATERIAL PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 65 430A or Equivalent /H-PMPH0P0G0 PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 65 430A or Equivalent /H-PMPKCP0G0-50x50x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 2.5kN 430A or Equivalent /H-PMPHAP0G0 PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 65 430A or Equivalent /H-PMP1HPRHD PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 80, Light 430A or Equivalent /H-PMP2HPRHE PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 80, Heavy 430A or Equivalent /H-PMP3KPRHF PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 80 430A or Equivalent /H-PMPPJPRHD PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 80, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPPLPRHD PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 80, Light Grade 400 or Equivalent /H-PMPQJPRHE PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 80, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPQLPRHE PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 80, Heavy Grade 400 or Equivalent /H-PMP5NPRHE PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 80 /H-PMP5GPRHE PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 80 /H-PMP5MPRHE PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 80, Light /H-PMPUPPRHE PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent /H-PMPURPRHD PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 80 /H-PMPUQPRHE PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 80 430A or Equivalent /H-PMPW0P0H0 PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 80 430A or Equivalent /H-PMPWSP0H0 PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 80 430A or Equivalent /H-PMPX0P0H0 PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 80 430A or Equivalent /H-PMPXSP0H0 PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 80 430A or Equivalent /H-PMPY0P0H0 PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 80 430A or Equivalent
3-193
TYPE
PBOR0
STYP
TTYP
UTYP SPACER
PBOR1
CATREF /H-PMPYSP0H0
PIPE BASE
TUBULAR BASE
TUBE
40 50 80
BEND
40 50 80
SECTIONAL BASE
PIPE LUG
DETAIL MATERIAL PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 80 316S31/S33 or Equivalent /H-PMPBEP0H0 PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 80 430A or Equivalent /H-PMPBFP0H0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 80 430A or Equivalent /H-PMPCEP0H0 PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 80 430A or Equivalent /H-PMPCFP0H0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 80 430A or Equivalent /H-PMPT0P0H0E PSL-353A (Tubular Base), SWL Carbon Steel 5.7kN /H-PMPT0P0H0F PSL-353A (Tubular Base), SWL Carbon Steel 6.9kN /H-PMPT0P0H0H PSL-353A (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPTCP0H0E PSL-353B (Tubular Base), SWL Carbon Steel 5.7kN /H-PMPTCP0H0F PSL-353B (Tubular Base), SWL Carbon Steel 6.9kN /H-PMPTCP0H0H PSL-353B (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPKCP0H0-50x50x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 2.5kN 430A or Equivalent /H-PMPKCP0H0-70x70x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 4.8kN 430A or Equivalent /H-PMPKCP0H0-70x70x1 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 0RSA 5.6kN 430A or Equivalent /H-PMPG1PRHE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent /H-PMPG2PRHE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent /H-PMPG3PRHE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent /H-PMPG4PRHB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRHC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRHD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRHE PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRHF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRHH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRHK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRHM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPG4PRHP PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent /H-PMPG4PRHR PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent
3-194
TYPE
PBOR0
STYP
TTYP
UTYP
PBOR1 56 64 72
CATREF /H-PMPG4PRHT /H-PMPG4PRHV /H-PMPG4PRHX /H-PMPDTP0H0 /H-PMPDUP0H0 /H-PMPDVP0H0 /H-PMPDWP0H0 /H-PMPETP0H0 /H-PMPEUP0H0 /H-PMPEVP0H0 /H-PMPEWP0H0 /H-PMPL0PRHD /H-PMPM0PRHD /H-PMPS0P0H0 /H-PMPH0P0H0 /H-PMPHAP0H0
=SHORT
TALL
CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP ANCH HOLD DOWN CLAMP 100 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
/H-PMPPLPRJD /H-PMPQJPRJE
TEMP RANGE L
/H-PMPQLPRJE
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 80 430A or Equivalent PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 80 430A or Equivalent PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 80 430A or Equivalent PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 80 430A or Equivalent PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 80 430A or Equivalent PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 80 430A or Equivalent PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 80 430A or Equivalent PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 80 430A or Equivalent PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 80 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 80 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 80 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 80 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 100, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 100, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 100 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 100, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 100, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 100, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 100, Heavy Grade 400 or Equivalent
3-195
TYPE
PBOR0
PBOR1
CATREF /H-PMP5NPRJE
LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP WELDED OVERSTRAP FLAT
TEMP RANGE M
UPRIGHT
ROUND
PIPE BASE
TUBULAR BASE
TUBE
50 80 100
BEND
50 80 100
SECTIONAL BASE
PIPE LUG
R=1.5D
DETAIL MATERIAL PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 100 /H-PMP5GPRJE PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 100 /H-PMP5MPRJE PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 100, Light /H-PMPUPPRJE PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 100 430A or Equivalent /H-PMPURPRJD PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 100 /H-PMPUQPRJE PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 100 430A or Equivalent /H-PMPW0P0J0 PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 100 430A or Equivalent /H-PMPWSP0J0 PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 100 430A or Equivalent /H-PMPX0P0J0 PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 100 430A or Equivalent /H-PMPXSP0J0 PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 100 430A or Equivalent /H-PMPY0P0J0 PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 100 430A or Equivalent /H-PMPYSP0J0 PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 100 316S31/S33 or Equivalent /H-PMPBEP0J0 PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 100 430A or Equivalent /H-PMPBFP0J0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 100 430A or Equivalent /H-PMPCEP0J0 PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 100 430A or Equivalent /H-PMPCFP0J0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 100 430A or Equivalent /H-PMPT0P0J0F PSL-353A (Tubular Base), SWL Carbon Steel 6.9kN /H-PMPT0P0J0H PSL-353A (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPT0P0J0J PSL-353A (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPTCP0J0F PSL-353B (Tubular Base), SWL Carbon Steel 6.9kN /H-PMPTCP0J0H PSL-353B (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPTCP0J0J PSL-353B (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPKCP0J0-50x50x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 2.5kN 430A or Equivalent /H-PMPKCP0J0-70x70x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 4.8kN 430A or Equivalent /H-PMPKCP0J0-70x70x1 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 0RSA 5.6kN 430A or Equivalent /H-PMPKCP0J0-89x76x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE .54RST 14.7kN 430A or Equivalent /H-PMPG1PRJE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 100 430A or Equivalent
3-196
TYPE
PBOR0
STYP
UTYP
PBOR1
8 10 12 16 20 24 30 36 42 48 56 64 72
/H-PMPG4PRJB /H-PMPG4PRJC /H-PMPG4PRJD /H-PMPG4PRJE /H-PMPG4PRJF /H-PMPG4PRJH /H-PMPG4PRJK /H-PMPG4PRJM /H-PMPG4PRJP /H-PMPG4PRJR /H-PMPG4PRJT /H-PMPG4PRJV /H-PMPG4PRJX /H-PMPDTP0J0 /H-PMPDUP0J0 /H-PMPDVP0J0 /H-PMPDWP0J0 /H-PMPETP0J0 /H-PMPEUP0J0 /H-PMPEVP0J0 /H-PMPEWP0J0 /H-PMPL0PRJD
=SHORT
TALL
CLEVIS HANGER
DETAIL MATERIAL PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 100 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 100 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 100 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 100 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 100 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 100 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 100 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 100 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 100 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 100 PSL-308 (Clevis Hanger), Pipe BS EN10 Size 100 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-197
TYPE
PBOR0
STYP PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP
TTYP
UTYP
PBOR1
ANCH HOLD DOWN CLAMP 125 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
/H-PMPPLPRKE /H-PMPQJPRKE
TEMP RANGE L ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP NON GRIP PIPE BASE LIGHT DUTY HEAVY DUTY PIPE CLIP BASE LIGHT DUTY HEAVY DUTY TUBULAR BASE TUBE 80 100 BEND 80 TEMP RANGE M
/H-PMPQLPRKE /H-PMP5NPRKF /H-PMP5GPRKF /H-PMP5MPRKF /H-PMPUPPRKE /H-PMPUQPRKE /H-PMPBEP0K0 /H-PMPBFP0K0 /H-PMPCEP0K0 /H-PMPCFP0K0 /H-PMPT0P0K0H /H-PMPT0P0K0J /H-PMPTCP0K0H
DETAIL MATERIAL PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 100 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 100 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 100 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 100 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 125, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 125, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 125 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 125, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 125, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 125, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 125, Heavy Grade 400 or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 125 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 125 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 125, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 125 430A or Equivalent PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 125 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 125 430A or Equivalent PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 125 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE 430A or Equivalent Duty), Pipe Size 125 PSL-353A (Tubular Base), SWL Carbon Steel 18.6kN PSL-353A (Tubular Base), SWL Carbon Steel 33.3kN PSL-353B (Tubular Base), SWL Carbon Steel 18.6kN
3-198
TYPE
PBOR0
UTYP
PBOR1 100
CATREF /H-PMPTCP0K0J
PIPE LUG
=SHORT
DETAIL MATERIAL PSL-353B (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPKCP0K0-70x70x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 4.8kN 430A or Equivalent /H-PMPKCP0K0-70x70x1 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 0RSA 5.6kN 430A or Equivalent /H-PMPKCP0K0-89x76x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE .54RST 14.7kN 430A or Equivalent /H-PMPKCP0K0-102x101 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x12.6RST 37.5kN 430A or Equivalent /H-PMPG1PRKE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent /H-PMPG2PRKE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent /H-PMPG3PRKE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent /H-PMPG4PRKB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRKC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRKD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRKE PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRKF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRKH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRKK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRKM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPG4PRKP PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent /H-PMPG4PRKR PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent /H-PMPG4PRKT PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent /H-PMPG4PRKV PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent /H-PMPG4PRKX PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent /H-PMPDTP0K0 PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 125 /H-PMPDUP0K0 PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 125 /H-PMPDVP0K0 PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 125 /H-PMPDWP0K0 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 125
3-199
TYPE
PBOR0
STYP
TTYP TALL
PBOR1
CATREF /H-PMPETP0K0 /H-PMPEUP0K0 /H-PMPEVP0K0 /H-PMPEWP0K0 /H-PMPL0PRKE /H-PMPM0PRKD /H-PMPS0P0K0 /H-PMPH0P0K0 /H-PMPHAP0K0
CLEVIS HANGER PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP ANCH HOLD DOWN CLAMP 150 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
/H-PMPPLPRLE /H-PMPQJPRLE
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TEMP RANGE M
DETAIL MATERIAL PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 125 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 125 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 125 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 125 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 125 430A or Equivalent PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 125 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 125 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 125 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 150, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 150, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 150 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 150, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 150, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 150, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 150, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 150 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 150 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 150 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 150, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 150 430A or Equivalent
3-200
TYPE
PBOR0
STYP
UTYP
PBOR1
CATREF /H-PMPURPRLE
WELDED OVERSTRAP
FLAT
UPRIGHT
ROUND
PIPE BASE
TUBULAR BASE
TUBE
80 100 150
BEND
80 100 150
SECTIONAL BASE
PIPE LUG
R=1.5D
DETAIL MATERIAL PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 150 /H-PMPUQPRLF PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 150 430A or Equivalent /H-PMPW0P0L0 PSL-314 (Welded Overstrap Type BS EN10 025 Grade FE 2A), Pipe Size 150 430A or Equivalent /H-PMPWSP0L0 PSL-315 (Welded Overstrap Type BS EN10 025 Grade FE 2B), Pipe Size 150 430A or Equivalent /H-PMPX0P0L0 PSL-316 (Welded Overstrap Type BS EN10 025 Grade FE 3A), Pipe Size 150 430A or Equivalent /H-PMPXSP0L0 PSL-317 (Welded Overstrap Type BS EN10 025 Grade FE 3B), Pipe Size 150 430A or Equivalent /H-PMPY0P0L0 PSL-321 (Welded Overstrap Type BS EN10 025 Grade FE 1A), Pipe Size 150 430A or Equivalent /H-PMPYSP0L0 PSL-322 (Welded Overstrap Type BS 1449 Grade 1B), Pipe Size 150 316S31/S33 or Equivalent /H-PMPBEP0L0 PSL-349 (Pipe Base Light BS EN10 025 Grade FE Duty), Pipe Size 150 430A or Equivalent /H-PMPBFP0L0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 150 430A or Equivalent /H-PMPCEP0L0 PSL-351 (Pipe Clip Base Light BS EN10 025 Grade FE Duty), Pipe Size 150 430A or Equivalent /H-PMPCFP0L0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 150 430A or Equivalent /H-PMPT0P0L0H PSL-353A (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPT0P0L0J PSL-353A (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPT0P0L0L PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPTCP0L0H PSL-353B (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPTCP0L0J PSL-353B (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPTCP0L0L PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPKCP0L0-70x70x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE RSA 4.8kN 430A or Equivalent /H-PMPKCP0L0-70x70x1 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 0RSA 5.6kN 430A or Equivalent /H-PMPKCP0L0-89x76x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE .54RST 14.7kN 430A or Equivalent /H-PMPKCP0L0-102x101 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x12.6RST 37.5kN 430A or Equivalent /H-PMPKCP0L0-133x102 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x15RST 44.1kN 430A or Equivalent /H-PMPKCP0L0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x23UC 76.0kN 430A or Equivalent /H-PMPKCP0L0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x30UC 71.6kN 430A or Equivalent /H-PMPKCP0L0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x37UC 90.2kN 430A or Equivalent /H-PMPG1PRLE PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 150 430A or Equivalent
3-201
TYPE
PBOR0
STYP
UTYP
PBOR1
8 10 12 16 20 24 30 36 42 48 56 64 72
/H-PMPG4PRLB /H-PMPG4PRLC /H-PMPG4PRLD /H-PMPG4PRLE /H-PMPG4PRLF /H-PMPG4PRLH /H-PMPG4PRLK /H-PMPG4PRLM /H-PMPG4PRLP /H-PMPG4PRLR /H-PMPG4PRLT /H-PMPG4PRLV /H-PMPG4PRLX /H-PMPDTP0L0 /H-PMPDUP0L0 /H-PMPDVP0L0 /H-PMPDWP0L0 /H-PMPETP0L0 /H-PMPEUP0L0 /H-PMPEVP0L0 /H-PMPEWP0L0 /H-PMPL0PRLF
=SHORT
TALL
CLEVIS HANGER
DETAIL MATERIAL PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 150 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 150 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 150 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 150 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 150 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 150 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 150 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 150 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 150 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 150 PSL-308 (Clevis Hanger), Pipe BS EN10 Size 150 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-202
TYPE
PBOR0
STYP PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP
TTYP
UTYP
PBOR1
CATREF /H-PMPM0PRLD
ANCH HOLD DOWN CLAMP 175 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
TEMP RANGE L ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE N TEMP RANGE G LIGHT SERIES TUBULAR BASE TUBE TEMP RANGE M 80 100 150 BEND 80 100 150 SECTIONAL BASE 89x76x8.54RST 102x101x12.6RST 133x102x15RST
DETAIL MATERIAL PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 150 430A or Equivalent /H-PMPS0P0L0 PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 150 430A or Equivalent /H-PMPH0P0L0 PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 150 430A or Equivalent /H-PMPHAP0L0 PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 150 430A or Equivalent /H-PMP1HPRME PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 175, Light 430A or Equivalent /H-PMP2HPRME PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 175, Heavy 430A or Equivalent /H-PMP3KPRMH PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 175 430A or Equivalent /H-PMPPJPRME PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 175, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPPLPRME PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 175, Light Grade 400 or Equivalent /H-PMPQJPRMF PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 175, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPQLPRMF PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 175, Heavy Grade 400 or Equivalent /H-PMP5NPRMH PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 175 /H-PMP5GPRMH PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 175 /H-PMP5MPRMH PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 175, Light /H-PMPT0P0M0H PSL-353A (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPT0P0M0J PSL-353A (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPT0P0M0L PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPTCP0M0H PSL-353B (Tubular Base), SWL Carbon Steel 18.6kN /H-PMPTCP0M0J PSL-353B (Tubular Base), SWL Carbon Steel 33.3kN /H-PMPTCP0M0L PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPKCP0M0-89x76x8 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE .54RST 14.7kN 430A or Equivalent /H-PMPKCP0M0-102x101 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x12.6RST 37.5kN 430A or Equivalent /H-PMPKCP0M0-133x102 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 430A or Equivalent x15RST 44.1kN
3-203
TYPE
PBOR0
STYP
UTYP
PBOR1
PIPE LUG
HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE 200 2 BOLT PIPE CLIP HEAVY DUTY HEAVY DUTY LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
CATREF DETAIL MATERIAL /H-PMPKCP0M0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x23UC 76.0kN 430A or Equivalent /H-PMPKCP0M0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x30UC 71.6kN 430A or Equivalent /H-PMPKCP0M0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x37UC 90.2kN 430A or Equivalent /H-PMPG1PRMF PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 175 430A or Equivalent /H-PMPG2PRMF PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 175 430A or Equivalent /H-PMPG3PRMF PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 175 430A or Equivalent /H-PMPG4PRMB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRMC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRMD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRME PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRMF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRMH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRMK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRMM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPG4PRMP PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent /H-PMPG4PRMR PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent /H-PMPG4PRMT PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent /H-PMPG4PRMV PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent /H-PMPG4PRMX PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent /H-PMPH0P0M0 PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 175 430A or Equivalent /H-PMPBFP0M0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 175 430A or Equivalent /H-PMPCFP0M0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 175 430A or Equivalent /H-PMP1HPRNE PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 200, Light 430A or Equivalent /H-PMP2HPRNE PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 200, Heavy 430A or Equivalent /H-PMP3KPRNH PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE 430A or Equivalent Pipe Clip), Pipe Size 200 /H-PMPPJPRNE PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 200, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent
3-204
TYPE
PBOR0
STYP
TTYP
PBOR1
DETAIL PSL-303 (Three Bolt Pipe Clip), Pipe Size 200, Light
HEAVY SERIES
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP TICO CLAD NON GRIP TUBULAR BASE TUBE 100 150 200 BEND 100 150 200 SECTIONAL BASE 102x101x12.6RST 133x102x15RST 152x152x23UC 152x152x30UC 152x152x37UC 203x203x46UC 203x133x25UB 203x133x30UB PIPE LUG R=1.5D TEMP RANGE M
/H-PMPQLPRNF /H-PMPRKPRNK /H-PMP5NPRNH /H-PMP5GPRNH /H-PMP5MPRNH /H-PMPUPPRNF /H-PMPURPRNE /H-PMPUQPRNF /H-PMPT0P0N0J /H-PMPT0P0N0L /H-PMPT0P0N0N /H-PMPTCP0N0J /H-PMPTCP0N0L /H-PMPTCP0N0N /H-PMPKCP0N0-102x101 x12.6RST /H-PMPKCP0N0-133x102 x15RST /H-PMPKCP0N0-152x152 x23UC /H-PMPKCP0N0-152x152 x30UC /H-PMPKCP0N0-152x152 x37UC /H-PMPKCP0N0-203x203 x46UC /H-PMPKCP0N0-203x133 x25UB /H-PMPKCP0N0-203x133 x30UB /H-PMPG1PRNF
MATERIAL BS 1501 151/161 Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 200, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 200, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 200 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 200 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 200 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 200, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 200 430A or Equivalent PSL-312 (Tico Clad U Bolt), Carbon Steel & TICO Pipe Size 200 PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 200 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 33.3kN PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN PSL-353B (Tubular Base), SWL Carbon Steel 33.3kN PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 37.5kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 44.1kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 76.0kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 71.6kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 90.2kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 86.3kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 101.0kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 122.0kN 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 200 430A or Equivalent
3-205
TYPE
PBOR0
STYP
UTYP
PBOR1
8 10 12 16 20 24 30 36 42 48 56 64 72
/H-PMPG4PRNB /H-PMPG4PRNC /H-PMPG4PRND /H-PMPG4PRNE /H-PMPG4PRNF /H-PMPG4PRNH /H-PMPG4PRNK /H-PMPG4PRNM /H-PMPG4PRNP /H-PMPG4PRNR /H-PMPG4PRNT /H-PMPG4PRNV /H-PMPG4PRNX /H-PMPDTP0N0 /H-PMPDUP0N0 /H-PMPDVP0N0 /H-PMPDWP0N0 /H-PMPETP0N0 /H-PMPEUP0N0 /H-PMPEVP0N0 /H-PMPEWP0N0 /H-PMPL0PRNH
=SHORT
TALL
CLEVIS HANGER
DETAIL MATERIAL PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 200 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 200 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 200 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 200 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 200 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 200 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 200 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 200 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 200 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 200 PSL-308 (Clevis Hanger), Pipe BS EN10 Size 200 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-206
TYPE
PBOR0
STYP PEAR SHAPED CLIP OFFSET PIPE CLAMP HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE
TTYP
UTYP
PBOR1
CATREF /H-PMPM0PRNF
ANCH HOLD DOWN CLAMP 225 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G LIGHT SERIES TUBULAR BASE TUBE TEMP RANGE M 150 200 BEND 150 200 SECTIONAL BASE 133x102x15RST 152x152x23UC
DETAIL MATERIAL PSL-310 (Pear Shaped Clip), BS EN10 025 Grade FE Pipe Size 200 430A or Equivalent /H-PMPS0P0N0 PSL-342 (Offset Pipe Clamp), BS EN10 025 Grade FE Pipe Size 200 430A or Equivalent /H-PMPH0P0N0 PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 200 430A or Equivalent /H-PMPBFP0N0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 200 430A or Equivalent /H-PMPCFP0N0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 200 430A or Equivalent /H-PMPHAP0N0 PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 200 430A or Equivalent /H-PMP1HPRPE PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 225, Light 430A or Equivalent /H-PMP2HPRPF PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 225, Heavy 430A or Equivalent /H-PMP3KPRPH PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 225 430A or Equivalent /H-PMPPJPRPE PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 225, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPPLPRPE PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 225, Light Grade 400 or Equivalent /H-PMPQJPRPF PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 225, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPQLPRPF PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 225, Heavy Grade 400 or Equivalent /H-PMPRKPRPM PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 225 430A or Equivalent /H-PMP5NPRPH PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 225 /H-PMP5GPRPH PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 225 /H-PMP5MPRPH PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 225, Light /H-PMPT0P0P0L PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPT0P0P0N PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPTCP0P0L PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPTCP0P0N PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPKCP0P0-133x102 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 430A or Equivalent x15RST 44.1kN /H-PMPKCP0P0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x23UC 76.0kN 430A or Equivalent
3-207
TYPE
PBOR0
STYP
UTYP
PBOR1
PIPE LUG
PEAR SHAPED CLIP HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE 250 2 BOLT PIPE CLIP HEAVY DUTY HEAVY DUTY LIGHT SERIES HEAVY SERIES X H HEAVY DUTY TEMP RANGE H TEMP RANGE H TEMP RANGE K
CATREF DETAIL MATERIAL /H-PMPKCP0P0-152x152 PSL-354 (Sectional Base), SWL BS EN10 x30UC 71.6kN 430A or /H-PMPKCP0P0-152x152 PSL-354 (Sectional Base), SWL BS EN10 x37UC 90.2kN 430A or /H-PMPKCP0P0-203x203 PSL-354 (Sectional Base), SWL BS EN10 x46UC 86.3kN 430A or /H-PMPKCP0P0-203x133 PSL-354 (Sectional Base), SWL BS EN10 x25UB 101.0kN 430A or /H-PMPKCP0P0-203x133 PSL-354 (Sectional Base), SWL BS EN10 x30UB 122.0kN 430A or /H-PMPG1PRPF PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 225 430A or /H-PMPG2PRPF PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 225 430A or /H-PMPG3PRPF PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 225 430A or /H-PMPG4PRPB PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or /H-PMPG4PRPC PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or /H-PMPG4PRPD PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or /H-PMPG4PRPE PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or /H-PMPG4PRPF PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or /H-PMPG4PRPH PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or /H-PMPG4PRPK PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or /H-PMPG4PRPM PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or /H-PMPG4PRPP PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or /H-PMPG4PRPR PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or /H-PMPG4PRPT PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or /H-PMPG4PRPV PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or /H-PMPG4PRPX PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or /H-PMPM0PRPF PSL-310 (Pear Shaped Clip), BS EN10 Pipe Size 225 430A or /H-PMPH0P0P0 PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 225 430A or /H-PMPBFP0P0 PSL-350 (Pipe Base Heavy BS EN10 Duty), Pipe Size 225 430A or /H-PMPCFP0P0 PSL-352 (Pipe Clip Base Heavy BS EN10 430A or Duty), Pipe Size 225 /H-PMP1HPRQE PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 250, Light 430A or /H-PMP2HPRQF PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 250, Heavy 430A or /H-PMP3KPRQK PSL-301XH (High Duty Two Bolt BS EN10 Pipe Clip), Pipe Size 250 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-208
TYPE
PBOR0
PBOR1
CATREF /H-PMPPJPRQE
DETAIL PSL-302 (Three Bolt Pipe Clip), Pipe Size 250, Light
/H-PMPPLPRQE /H-PMPQJPRQF
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP NON GRIP TUBULAR BASE TUBE 150 200 BEND 150 200 SECTIONAL BASE 133x102x15RST 152x152x23UC 152x152x30UC 152x152x37UC 203x203x46UC 203x133x25UB 203x133x30UB PIPE LUG R=1.5D R=3D TEMP RANGE M
/H-PMPQLPRQF /H-PMPRKPRQM /H-PMP5NPRQH /H-PMP5GPRQH /H-PMP5MPRQH /H-PMPUPPRQF /H-PMPUQPRQF /H-PMPT0P0Q0L /H-PMPT0P0Q0N /H-PMPTCP0Q0L /H-PMPTCP0Q0N /H-PMPKCP0Q0-133x102 x15RST /H-PMPKCP0Q0-152x152 x23UC /H-PMPKCP0Q0-152x152 x30UC /H-PMPKCP0Q0-152x152 x37UC /H-PMPKCP0Q0-203x203 x46UC /H-PMPKCP0Q0-203x133 x25UB /H-PMPKCP0Q0-203x133 x30UB /H-PMPG1PRQF /H-PMPG2PRQF
MATERIAL -20C to 100C: BS EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 250, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 250, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 250, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 250 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 250 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 250 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 250, Light PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 250 430A or Equivalent PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 250 430A or Equivalent PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 44.1kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 76.0kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 71.6kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 90.2kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 86.3kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 101.0kN 430A or Equivalent PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 122.0kN 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE 430A or Equivalent Pipe Size 250 PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 250 430A or Equivalent
3-209
TYPE
PBOR0
STYP
UTYP
PBOR1 8 10 12 16 20 24 30 36 42 48 56 64 72
CATREF /H-PMPG3PRQF /H-PMPG4PRQB /H-PMPG4PRQC /H-PMPG4PRQD /H-PMPG4PRQE /H-PMPG4PRQF /H-PMPG4PRQH /H-PMPG4PRQK /H-PMPG4PRQM /H-PMPG4PRQP /H-PMPG4PRQR /H-PMPG4PRQT /H-PMPG4PRQV /H-PMPG4PRQX /H-PMPDTP0Q0 /H-PMPDUP0Q0 /H-PMPDVP0Q0 /H-PMPDWP0Q0 /H-PMPETP0Q0 /H-PMPEUP0Q0 /H-PMPEVP0Q0 /H-PMPEWP0Q0 /H-PMPL0PRQH /H-PMPM0PRQF
=SHORT
TALL
DETAIL MATERIAL PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 250 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 250 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 250 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 250 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 250 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 250 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 250 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 250 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 250 PSL-308 (Clevis Hanger), Pipe BS EN10 Size 250 430A or PSL-310 (Pear Shaped Clip), BS EN10 Pipe Size 250 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-210
TYPE
PBOR0
UTYP
PBOR1
CATREF /H-PMPH0P0Q0
ANCH HOLD DOWN CLAMP 300 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G LIGHT SERIES U BOLT GRIP NON GRIP TUBULAR BASE TUBE 150 200 BEND 150 200 SECTIONAL BASE 152x152x23UC 152x152x30UC TEMP RANGE M
DETAIL MATERIAL PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 250 430A or Equivalent /H-PMPBFP0Q0 PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 250 430A or Equivalent /H-PMPCFP0Q0 PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 250 430A or Equivalent /H-PMPHAP0Q0 PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 250 430A or Equivalent /H-PMP1HPRRF PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 300, Light 430A or Equivalent /H-PMP2HPRRH PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 300, Heavy 430A or Equivalent /H-PMP3KPRRK PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 300 430A or Equivalent /H-PMPPJPRRF PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 300, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPPLPRRF PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 300, Light Grade 400 or Equivalent /H-PMPQJPRRH PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 300, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent /H-PMPQLPRRH PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 300, Heavy Grade 400 or Equivalent /H-PMPRKPRRM PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 300 430A or Equivalent /H-PMP5NPRRK PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 300 /H-PMP5GPRRK PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 300 /H-PMP5MPRRK PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 300, Light /H-PMPUPPRRF PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 300 430A or Equivalent /H-PMPUQPRRF PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 300 430A or Equivalent /H-PMPT0P0R0L PSL-353A (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPT0P0R0N PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPTCP0R0L PSL-353B (Tubular Base), SWL Carbon Steel 86.3kN /H-PMPTCP0R0N PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPKCP0R0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE 430A or Equivalent x23UC 76.0kN /H-PMPKCP0R0-152x152 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x30UC 71.6kN 430A or Equivalent
3-211
TYPE
PBOR0
STYP
UTYP
PBOR1
PIPE LUG
=SHORT
TALL
1 POINT
CATREF DETAIL MATERIAL /H-PMPKCP0R0-152x152 PSL-354 (Sectional Base), SWL BS EN10 x37UC 90.2kN 430A or /H-PMPKCP0R0-203x203 PSL-354 (Sectional Base), SWL BS EN10 x46UC 86.3kN 430A or /H-PMPKCP0R0-203x133 PSL-354 (Sectional Base), SWL BS EN10 x25UB 101.0kN 430A or /H-PMPKCP0R0-203x133 PSL-354 (Sectional Base), SWL BS EN10 x30UB 122.0kN 430A or /H-PMPG1PRRH PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 300 430A or /H-PMPG2PRRH PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 300 430A or /H-PMPG3PRRH PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 300 430A or /H-PMPG4PRRB PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or /H-PMPG4PRRC PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or /H-PMPG4PRRD PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or /H-PMPG4PRRE PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or /H-PMPG4PRRF PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or /H-PMPG4PRRH PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or /H-PMPG4PRRK PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or /H-PMPG4PRRM PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or /H-PMPG4PRRP PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or /H-PMPG4PRRR PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or /H-PMPG4PRRT PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or /H-PMPG4PRRV PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or /H-PMPG4PRRX PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or /H-PMPDTP0R0 PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 300 /H-PMPDUP0R0 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 300 /H-PMPDVP0R0 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 300 /H-PMPDWP0R0 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 300 /H-PMPETP0R0 PSL-389 (Sliding Pipe Clamp BS EN10 430A or Assembly Type 1), Pipe Size 300
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-212
TYPE
PBOR0
STYP
TTYP
PBOR1
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 350 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J HEAVY DUTY HEAVY DUTY
/H-PMPPLPRSH /H-PMPQJPRSK
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G HEAVY DUTY TEMP RANGE N TEMP RANGE G
DETAIL MATERIAL PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 300 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 300 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 300 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 300 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 300 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 300 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 300 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 300 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 350, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 350, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 350 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 350, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 350, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 350, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 350, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 350 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 350 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 350 PSL-304D (Heavy Duty Alloy BS 1501 - 620B Steel Pipe Clip), Pipe Size 350 PSL-304F (Heavy Duty Alloy BS 1501 - 622 - 515B Steel Pipe Clip), Pipe Size 350
3-213
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMP5MPRSK
U BOLT
TUBULAR BASE
TUBE BEND
200 200
SECTIONAL BASE
PIPE LUG
=SHORT
1 POINT 2 POINT
DETAIL MATERIAL PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 350, Light /H-PMP6MPRSP PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 350, Heavy /H-PMPUPPRSH PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 350 430A or Equivalent /H-PMPUQPRSH PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 350 430A or Equivalent /H-PMPT0P0S0N PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPTCP0S0N PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPKCP0S0-203x203 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x46UC 86.3kN 430A or Equivalent /H-PMPKCP0S0-203x133 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x25UB 101.0kN 430A or Equivalent /H-PMPKCP0S0-203x133 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x30UB 122.0kN 430A or Equivalent /H-PMPG1PRSK PSL-350 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 350 430A or Equivalent /H-PMPG2PRSK PSL-350 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 350 430A or Equivalent /H-PMPG3PRSK PSL-350 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 350 430A or Equivalent /H-PMPG4PRSB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRSC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRSD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRSE PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRSF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRSH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRSK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRSM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPG4PRSP PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent /H-PMPG4PRSR PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent /H-PMPG4PRST PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent /H-PMPG4PRSV PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent /H-PMPG4PRSX PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent /H-PMPDTP0S0 PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE 430A or Equivalent Assembly Type 1), Pipe Size 350 /H-PMPDUP0S0 PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 350
3-214
TYPE
PBOR0
STYP
TTYP
PBOR1
TALL
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 400 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J HEAVY DUTY HEAVY DUTY
/H-PMPPLPRTH /H-PMPQJPRTK
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N
DETAIL MATERIAL PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 350 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 350 PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 350 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 350 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 350 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 350 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 350 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 350 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 350 430A or Equivalent PSL-350 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 350 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 350 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 400, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 400, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 400 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 400, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 400, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 400, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 400, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 400 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 400
3-215
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMP5GPRTK
LIGHT SERIES HEAVY SERIES U BOLT GRIP NON GRIP TUBULAR BASE TUBE BEND SECTIONAL BASE 203x203x46UC 203x133x25UB 203x133x30UB PIPE LUG R=1.5D R=3D R=5D TUBE
200 200
8 10 12 16 20 24 30 36 42 48 56 64
DETAIL MATERIAL PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 400 /H-PMP7NPRTP PSL-304D (Heavy Duty Alloy BS 1501 - 620B Steel Pipe Clip), Pipe Size 400 /H-PMP7GPRTP PSL-304F (Heavy Duty Alloy BS 1501 - 622 - 515B Steel Pipe Clip), Pipe Size 400 /H-PMP5MPRTK PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 400, Light /H-PMP6MPRTP PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 400, Heavy /H-PMPUPPRTH PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 400 430A or Equivalent /H-PMPUQPRTH PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 400 430A or Equivalent /H-PMPT0P0T0N PSL-353A (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPTCP0T0N PSL-353B (Tubular Base), SWL Carbon Steel 115.7kN /H-PMPKCP0T0-203x203 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x46UC 86.3kN 430A or Equivalent /H-PMPKCP0T0-203x133 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x25UB 101.0kN 430A or Equivalent /H-PMPKCP0T0-203x133 PSL-354 (Sectional Base), SWL BS EN10 025 Grade FE x30UB 122.0kN 430A or Equivalent /H-PMPG1PRTK PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 400 430A or Equivalent /H-PMPG2PRTK PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 400 430A or Equivalent /H-PMPG3PRTK PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 400 430A or Equivalent /H-PMPG4PRTB PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent /H-PMPG4PRTC PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent /H-PMPG4PRTD PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent /H-PMPG4PRTE PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent /H-PMPG4PRTF PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent /H-PMPG4PRTH PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent /H-PMPG4PRTK PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent /H-PMPG4PRTM PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent /H-PMPG4PRTP PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent /H-PMPG4PRTR PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent /H-PMPG4PRTT PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE 430A or Equivalent Dia 56 /H-PMPG4PRTV PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent
3-216
TYPE
PBOR0
TTYP =SHORT
PBOR1 72
CATREF /H-PMPG4PRTX /H-PMPDTP0T0 /H-PMPDUP0T0 /H-PMPDVP0T0 /H-PMPDWP0T0 /H-PMPETP0T0 /H-PMPEUP0T0 /H-PMPEVP0T0 /H-PMPEWP0T0 /H-PMPL0PRTH /H-PMPH0P0T0
TALL
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 450 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J HEAVY DUTY HEAVY DUTY
/H-PMPPLPRUK /H-PMPQJPRUM
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 400 PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 400 PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 400 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 400 PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 400 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 400 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 400 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 400 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 400 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 400 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 400 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 400 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 400 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 450, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 450, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 450 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 450, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 450, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 450, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS
3-217
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMPQLPRUM /H-PMPRKPRUP /H-PMP5NPRUK /H-PMP5GPRUK /H-PMP7NPRUP /H-PMP7GPRUP /H-PMP5MPRUK /H-PMP6MPRUP /H-PMPUPPRUH /H-PMPUQPRUH /H-PMPG1PRUM /H-PMPG2PRUM /H-PMPG3PRUM
DETAIL
HEAVY DUTY
LIGHT SERIES HEAVY SERIES U BOLT GRIP NON GRIP PIPE LUG R=1.5D R=3D R=5D TUBE
8 10 12 16 20 24 30 36 42 48 56 64
/H-PMPG4PRUB /H-PMPG4PRUC /H-PMPG4PRUD /H-PMPG4PRUE /H-PMPG4PRUF /H-PMPG4PRUH /H-PMPG4PRUK /H-PMPG4PRUM /H-PMPG4PRUP /H-PMPG4PRUR /H-PMPG4PRUT /H-PMPG4PRUV
MATERIAL 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 450, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 450 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 450 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 450 PSL-304D (Heavy Duty Alloy BS 1501 - 620B Steel Pipe Clip), Pipe Size 450 PSL-304F (Heavy Duty Alloy BS 1501 - 622 - 515B Steel Pipe Clip), Pipe Size 450 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 450, Light PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 450, Heavy PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 450 430A or Equivalent PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 450 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 450 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 450 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 450 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent
3-218
TYPE
PBOR0
TTYP =SHORT
PBOR1 72
CATREF /H-PMPG4PRUX /H-PMPDTP0U0 /H-PMPDUP0U0 /H-PMPDVP0U0 /H-PMPDWP0U0 /H-PMPETP0U0 /H-PMPEUP0U0 /H-PMPEVP0U0 /H-PMPEWP0U0 /H-PMPL0PRUK /H-PMPH0P0U0
TALL
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 500 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J HEAVY DUTY HEAVY DUTY
/H-PMPPLPRVK /H-PMPQJPRVM
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 450 PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 450 PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 450 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 450 PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 450 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 450 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 450 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 450 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 450 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 450 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 450 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 450 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 450 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 500, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 500, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 500 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 500, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 500, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 500, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS
3-219
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMPQLPRVM /H-PMPRKPRVP /H-PMP5NPRVK /H-PMP5GPRVK /H-PMP7NPRVP /H-PMP7GPRVP /H-PMP5MPRVK /H-PMP6MPRVP /H-PMPUPPRVH /H-PMPUQPRVH /H-PMPG1PRVM /H-PMPG2PRVM /H-PMPG3PRVM
DETAIL
HEAVY DUTY
LIGHT SERIES HEAVY SERIES U BOLT GRIP NON GRIP PIPE LUG R=1.5D R=3D R=5D TUBE
8 10 12 16 20 24 30 36 42 48 56 64
/H-PMPG4PRVB /H-PMPG4PRVC /H-PMPG4PRVD /H-PMPG4PRVE /H-PMPG4PRVF /H-PMPG4PRVH /H-PMPG4PRVK /H-PMPG4PRVM /H-PMPG4PRVP /H-PMPG4PRVR /H-PMPG4PRVT /H-PMPG4PRVV
MATERIAL 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 500, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 500 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 500 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 500 PSL-304D (Heavy Duty Alloy BS 1501 - 620B Steel Pipe Clip), Pipe Size 500 PSL-304F (Heavy Duty Alloy BS 1501 - 622 - 515B Steel Pipe Clip), Pipe Size 500 PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 500, Light PSL-304A (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 500, Heavy PSL-311 (U Bolt Grip Type), BS EN10 025 Grade FE Pipe Size 500 430A or Equivalent PSL-313 (U Bolt Non Grip BS EN10 025 Grade FE Type), Pipe Size 500 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 500 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 500 430A or Equivalent PSL-358 (Pipe Lug Attachment), BS EN10 025 Grade FE Pipe Size 500 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 8 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 10 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 12 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 16 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 20 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 24 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 30 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 36 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 42 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 48 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 56 430A or Equivalent PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 64 430A or Equivalent
3-220
TYPE
PBOR0
TTYP =SHORT
PBOR1 72
CATREF /H-PMPG4PRVX /H-PMPDTP0V0 /H-PMPDUP0V0 /H-PMPDVP0V0 /H-PMPDWP0V0 /H-PMPETP0V0 /H-PMPEUP0V0 /H-PMPEVP0V0 /H-PMPEWP0V0 /H-PMPL0PRVK /H-PMPH0P0V0
TALL
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 550 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE J HEAVY DUTY HEAVY DUTY
/H-PMPPLPRWK /H-PMPQJPRWM
DETAIL MATERIAL PSL-114 (Lug Attachment), Bolt BS EN10 025 Grade FE Dia 72 430A or Equivalent PSL-388 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 500 PSL-390 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 500 PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 500 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 500 PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 500 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 500 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 500 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 500 PSL-308 (Clevis Hanger), Pipe BS EN10 025 Grade FE Size 500 430A or Equivalent PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 500 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 500 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 500 430A or Equivalent PSL-383 (Anchor Hold Down BS EN10 025 Grade FE Clamp), Pipe Size 500 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 550, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 550, Heavy 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 550, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 550, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 550, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent
3-221
TYPE
PBOR0
STYP
TTYP
PBOR1
CATREF /H-PMPQLPRWM /H-PMP5NPRWK /H-PMP5GPRWK /H-PMP7NPRWP /H-PMP7GPRWP /H-PMP5MPRWK /H-PMP6MPRWP /H-PMPG1PRWM /H-PMPG2PRWM /H-PMPG3PRWM
DETAIL PSL-303 (Three Bolt Pipe Clip), Pipe Size 550, Heavy
LIGHT DUTY
HEAVY DUTY
LIGHT SERIES HEAVY SERIES PIPE LUG R=1.5D R=3D R=5D TUBE
8 10 12 16 20 24 30 36 42 48 56 64 72
/H-PMPG4PRWB /H-PMPG4PRWC /H-PMPG4PRWD /H-PMPG4PRWE /H-PMPG4PRWF /H-PMPG4PRWH /H-PMPG4PRWK /H-PMPG4PRWM /H-PMPG4PRWP /H-PMPG4PRWR /H-PMPG4PRWT /H-PMPG4PRWV /H-PMPG4PRWX /H-PMPDTP0W0 /H-PMPDUP0W0
=SHORT
1 POINT 2 POINT
PSL-304C (Alloy Steel Pipe Clip), Pipe Size 550 PSL-304E (Alloy Steel Pipe Clip), Pipe Size 550 PSL-304D (Heavy Duty Alloy Steel Pipe Clip), Pipe Size 550 PSL-304F (Heavy Duty Alloy Steel Pipe Clip), Pipe Size 550 PSL-304A (Alloy Steel Pipe Clip), Pipe Size 550, Light PSL-304A (Alloy Steel Pipe Clip), Pipe Size 550, Heavy PSL-358 (Pipe Lug Attachment), Pipe Size 550 PSL-358 (Pipe Lug Attachment), Pipe Size 550 PSL-358 (Pipe Lug Attachment), Pipe Size 550 PSL-114 (Lug Attachment), Bolt Dia 8 PSL-114 (Lug Attachment), Bolt Dia 10 PSL-114 (Lug Attachment), Bolt Dia 12 PSL-114 (Lug Attachment), Bolt Dia 16 PSL-114 (Lug Attachment), Bolt Dia 20 PSL-114 (Lug Attachment), Bolt Dia 24 PSL-114 (Lug Attachment), Bolt Dia 30 PSL-114 (Lug Attachment), Bolt Dia 36 PSL-114 (Lug Attachment), Bolt Dia 42 PSL-114 (Lug Attachment), Bolt Dia 48 PSL-114 (Lug Attachment), Bolt Dia 56 PSL-114 (Lug Attachment), Bolt Dia 64 PSL-114 (Lug Attachment), Bolt Dia 72 PSL-388 (Sliding Pipe Clamp Assembly Type 1), Pipe Size 550 PSL-390 (Sliding Pipe Clamp Assembly Type 2), Pipe Size 550
MATERIAL BS 1501 151/161 Grade 400 or Equivalent BS 1501 - 620B BS 1501 - 622 - 515B BS 1501 - 620B BS 1501 - 622 - 515B BS 1501 - 620B BS 1501 - 620B BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or BS EN10 430A or 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-222
TYPE
PBOR0
STYP
TTYP
PBOR1
TALL
HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE 600 2 BOLT PIPE CLIP HEAVY DUTY HEAVY DUTY LIGHT SERIES HEAVY SERIES X H HEAVY DUTY 3 BOLT PIPE CLIP LIGHT SERIES TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE J
/H-PMPPLPRXK /H-PMPQJPRXP
TEMP RANGE L X H HIGH DUTY ALLOY PIPE CLIP LIGHT DUTY TEMP RANGE K TEMP RANGE N TEMP RANGE G
DETAIL MATERIAL PSL-392 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 550 PSL-394 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 550 PSL-389 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 1), Pipe Size 430A or Equivalent 550 PSL-391 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 2), Pipe Size 430A or Equivalent 550 PSL-393 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 3), Pipe Size 430A or Equivalent 550 PSL-395 (Sliding Pipe Clamp BS EN10 025 Grade FE Assembly Type 4), Pipe Size 430A or Equivalent 550 PSL-347 (Hold Down Pipe BS EN10 025 Grade FE Clamp), Pipe Size 550 430A or Equivalent PSL-350 (Pipe Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 550 430A or Equivalent PSL-352 (Pipe Clip Base Heavy BS EN10 025 Grade FE Duty), Pipe Size 550 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 600, Light 430A or Equivalent PSL-301 (Two Bolt Pipe Clip), BS EN10 025 Grade FE Pipe Size 600, Heavy 430A or Equivalent PSL-301XH (High Duty Two Bolt BS EN10 025 Grade FE Pipe Clip), Pipe Size 600 430A or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 600, Light EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 600, Light Grade 400 or Equivalent PSL-302 (Three Bolt Pipe -20C to 100C: BS Clip), Pipe Size 600, Heavy EN10 025 Grade FE 430A or Equivalent, 101C to 400C: BS 1501 151/161 Grade 400 or Equivalent PSL-303 (Three Bolt Pipe BS 1501 151/161 Clip), Pipe Size 600, Heavy Grade 400 or Equivalent PSL-302XH (High Duty Three BS EN10 025 Grade FE Bolt Pipe Clip), Pipe Size 600 430A or Equivalent PSL-304C (Alloy Steel Pipe BS 1501 - 620B Clip), Pipe Size 600 PSL-304E (Alloy Steel Pipe BS 1501 - 622 - 515B Clip), Pipe Size 600
3-223
TYPE
PBOR0
STYP
PBOR1
CATREF /H-PMP7NPRXP /H-PMP7GPRXP /H-PMP5MPRXK /H-PMP6MPRXP /H-PMPUPPRXH /H-PMPUQPRXH /H-PMPG1PRXP /H-PMPG2PRXP /H-PMPG3PRXP
LIGHT SERIES HEAVY SERIES U BOLT GRIP NON GRIP PIPE LUG R=1.5D R=3D R=5D TUBE
8 10 12 16 20 24 30 36 42 48 56 64 72
/H-PMPG4PRXB /H-PMPG4PRXC /H-PMPG4PRXD /H-PMPG4PRXE /H-PMPG4PRXF /H-PMPG4PRXH /H-PMPG4PRXK /H-PMPG4PRXM /H-PMPG4PRXP /H-PMPG4PRXR /H-PMPG4PRXT /H-PMPG4PRXV /H-PMPG4PRXX /H-PMPDTP0X0 /H-PMPDUP0X0 /H-PMPDVP0X0
=SHORT
DETAIL MATERIAL PSL-304D (Heavy Duty Alloy BS 1501 Steel Pipe Clip), Pipe Size 600 PSL-304F (Heavy Duty Alloy BS 1501 Steel Pipe Clip), Pipe Size 600 PSL-304A (Alloy Steel Pipe BS 1501 Clip), Pipe Size 600, Light PSL-304A (Alloy Steel Pipe BS 1501 Clip), Pipe Size 600, Heavy PSL-311 (U Bolt Grip Type), BS EN10 Pipe Size 600 430A or PSL-313 (U Bolt Non Grip BS EN10 Type), Pipe Size 600 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 600 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 600 430A or PSL-358 (Pipe Lug Attachment), BS EN10 Pipe Size 600 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 8 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 10 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 12 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 16 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 20 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 24 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 30 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 36 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 42 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 48 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 56 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 64 430A or PSL-114 (Lug Attachment), Bolt BS EN10 Dia 72 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 600 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 600 PSL-392 (Sliding Pipe Clamp BS EN10 430A or Assembly Type 3), Pipe Size 600
- 620B - 622 - 515B - 620B - 620B 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-224
TYPE
PBOR0
STYP
TTYP
PBOR1
TALL
CLEVIS HANGER HOLD DOWN CLAMP PIPE BASE PIPE CLIP BASE ANCH HOLD DOWN CLAMP 650 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES PIPE CLAMP ASSY =SHORT TEMP RANGE H TEMP RANGE H 1 POINT 2 POINT 3 POINT 4 POINT TALL 1 POINT 2 POINT 3 POINT 4 POINT HOLD DOWN CLAMP HEAVY DUTY HEAVY DUTY
/H-PMPBFP0X0 /H-PMPCFP0X0 /H-PMPHAP0X0 /H-PMP1HPRYK /H-PMP2HPRYP /H-PMPDTP0Y0 /H-PMPDUP0Y0 /H-PMPDVP0Y0 /H-PMPDWP0Y0 /H-PMPETP0Y0 /H-PMPEUP0Y0 /H-PMPEVP0Y0 /H-PMPEWP0Y0 /H-PMPH0P0Y0
DETAIL MATERIAL PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 600 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 600 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 600 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 600 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 600 PSL-308 (Clevis Hanger), Pipe BS EN10 Size 600 430A or PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 600 430A or PSL-350 (Pipe Base Heavy BS EN10 Duty), Pipe Size 600 430A or PSL-352 (Pipe Clip Base Heavy BS EN10 Duty), Pipe Size 600 430A or PSL-383 (Anchor Hold Down BS EN10 Clamp), Pipe Size 600 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 650, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 650, Heavy 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 650 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 650 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 650 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 650 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 650 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 650 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 650 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 650 PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 650 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-225
TYPE
PBOR0 700
PBOR1
CATREF /H-PMP1HPRZK /H-PMP2HPRZP /H-PMPDTP0Z0 /H-PMPDUP0Z0 /H-PMPDVP0Z0 /H-PMPDWP0Z0 /H-PMPETP0Z0 /H-PMPEUP0Z0 /H-PMPEVP0Z0 /H-PMPEWP0Z0 /H-PMPH0P0Z0
=SHORT
TALL
HOLD DOWN CLAMP 750 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES 3 BOLT PIPE CLIP HOLD DOWN CLAMP 800 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES HOLD DOWN CLAMP 850 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES HOLD DOWN CLAMP 900 2 BOLT PIPE CLIP LIGHT SERIES HEAVY SERIES 3 BOLT PIPE CLIP X H HIGH DUTY TEMP RANGE H TEMP RANGE H TEMP RANGE K TEMP RANGE H TEMP RANGE H TEMP RANGE H TEMP RANGE H X H HIGH DUTY TEMP RANGE H TEMP RANGE H TEMP RANGE K
/H-PMP1HPR1K /H-PMP2HPR1P /H-PMPRKPR1P /H-PMPH0P010 /H-PMP1HPR2K /H-PMP2HPR2P /H-PMPH0P020 /H-PMP1HPR3K /H-PMP2HPR3P /H-PMPH0P030 /H-PMP1HPR4K /H-PMP2HPR4P /H-PMPRKPR4P
DETAIL MATERIAL PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 700, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 700, Heavy 430A or PSL-388 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 700 PSL-390 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 700 PSL-392 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 700 PSL-394 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 700 PSL-389 (Sliding Pipe Clamp BS EN10 Assembly Type 1), Pipe Size 430A or 700 PSL-391 (Sliding Pipe Clamp BS EN10 Assembly Type 2), Pipe Size 430A or 700 PSL-393 (Sliding Pipe Clamp BS EN10 Assembly Type 3), Pipe Size 430A or 700 PSL-395 (Sliding Pipe Clamp BS EN10 Assembly Type 4), Pipe Size 430A or 700 PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 700 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 750, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 750, Heavy 430A or PSL-302XH (High Duty Three BS EN10 Bolt Pipe Clip), Pipe Size 750 430A or PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 750 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 800, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 800, Heavy 430A or PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 800 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 850, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 850, Heavy 430A or PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 850 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 900, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 900, Heavy 430A or PSL-302XH (High Duty Three BS EN10 Bolt Pipe Clip), Pipe Size 900 430A or
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-226
TYPE
PBOR0 1000
PBOR1
CATREF /H-PMPH0P040 /H-PMP1HPR5M /H-PMP2HPR5P /H-PMPH0P050 /H-PMR00RR00 /H-PMR00RRBB /H-PMR00RRCC /H-PMR00RRDD /H-PMR00RREE /H-PMR00RRFF /H-PMR00RRHH /H-PMR00RRKK /H-PMR00RRMM /H-PMR00RRPP /H-PMR00RRRR /H-PMR00RRTT /H-PMR00RRVV /H-PMR00RRXX
HOLD DOWN CLAMP ROD 0 8 10 12 16 20 24 30 36 42 48 56 64 72 RROD RROD RROD RROD RROD RROD RROD RROD RROD RROD RROD RROD RROD RROD
DETAIL MATERIAL PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 900 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 1000, Light 430A or PSL-301 (Two Bolt Pipe Clip), BS EN10 Pipe Size 1000, Heavy 430A or PSL-347 (Hold Down Pipe BS EN10 Clamp), Pipe Size 1000 430A or unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset unset
025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent 025 Grade FE Equivalent
3-227
3-228
3-229
3-230
3-231
3-232
3-233
3-234
3-235
3-236
3-237
3-238
3-239
3-240
3-241
3-242
3-243
3-244
3-245
3-246
3-247
3.7 Hangers & Supports Configurations and Data Tables 3.7.1 Configurations
The Hangers & Supports application makes use of catalogue information which describes both support template and hanger configurations. This data is stored in catalogue elements and is accessed by means of a specification. Configurations are thus similar to a Specification Reference (SPREF) and both the Subframe (SBFR) and Hanger (HANG) elements have :CONFIG UDAs. The referenced SPCO points, via an ACOM and a GMSE, to a CATE which actually holds all the configuration data.
Tail connection type (tells the application how to connect to the steelwork or civil): NONE BLTD BOLT SBOL WELD No connection (e.g. sliding) Bolted connection at back marker p-line Bolted connection at face of steel using back-marker positions Bolted connection at face of steel with option of using back-marker or central position Welded connection
:DESINFO Not used at this release :DRAINFO Not used at this release :MAXLEN Maximum hanger length where not explicitly defined using hanger length data table (see below) :MINLEN :PSLOPE :ASLOPE Minimum hanger length where not explicitly defined using hanger length data table (see below) Logical flag if pipe is permitted to slope wrt hanger direction Logical flag if steel/civil attachment is permitted to slope wrt hanger direction
:PARHANG Logical flag if partial build available for parallel type configurations
3-248
Members The configuration CATE may own any number of TEXT elements which are used to describe the components used in the hanger. Each component has a TEXT element placed in the correct order in the members list; the description is stored in the STEX attribute. Hanger Build Macros Every hanger configuration has an associated build macro which is situated in the DES/SUPP applicationware directory. The macros have the form MHB-{suffix} (see CATE GTYP above). These macros are PML-based, but make use of a specially designed toolkit which lets you create a build macro for almost any hanger configuration. It is recommended that you follow an example, of which there are many supplied with the product, to aid your understanding of this section. The toolkit subroutines which you can call in your build macros are as follows: XHBPCLA To create, orientate and position a PCLA element XHBFITT XHBHELE XHBHORI XHBSCLA XHBSTART XHBSTART XHBSPAC XHBHCLN To reposition fitting once last component is known To create, orientate and position a HELE element To orientate a HELE element To create, orientate and position an SCLA element To start Hanger building To start Hanger building To create steel profile spacer between specified hanger elements To check the fitted length on any hanger element
Apart from these, the amount of PML writing you need to do is minimal, although some knowledge of PML and macro writing would be useful. In some cases, the order of element creation means that some additional work needs to be done by the build macro. For an example of this, see the supplied macro MHB-CBWA. Each of these subroutines is called by using the syntax CALLSUP <subroutine name> <args> and requires arguments which enable it to perform its task correctly. Each argument should be enclosed in the delimiters $< ... $> if there is any whitespace. Each macro may also require that a global variable is set, or may in turn set a global variable. For descriptions of RTO values, see the section which details hanger catalogues and datasets. XHBPCLA: Arguments 1 PCLA STYP(s) For tube ATTAs, single value (quoted if using TANS) For component ATTAs, space or / separated list for TEE, ELBO, BEND components (NONE if not applicable)
3-249
2 3 4
Any other selectors (quoted if using TANS) COMP or TUBE Hanger Direction p-point (for TUBE). This p-point will be orientated to point in the direction of the hanger Rotation Direction p-point (for COMP). This p-point will be orientated to point in the perpendicular direction of BENDs or ELBOs. Angle flag. True if the component has a DDANG which needs to be deduced. Connection/Fitting instructions: ATTA FITH FITP CONN Sets PCLA height to distance P0 to P3 of ATTA Sets PCLA height to distance HH to HT Sets PCLA height to half pipe OD Does not set PCLA height
5 6
Spec from which to select component: INSPEC PSPEC <gid> Select from current HSPEC Select from attached pipe PSPEC Select from explicit specification
Globals used None Globals set !!CDSNHB.RTOVAL1 !!CDSNHB.RTOVAL2 Derived RTO value at P1 end Derived RTO value at P2 end
3-250
XHBFITT:
Arguments None
Globals set None XHBHELE: Arguments 1 2 3 4 5 HELE STYP Any other selectors (quoted if using TANS) HELE GTYP. Unique WORD attribute used to identify HELE for later operations GTYP of element which will be at the arrive end of the new HELE GTYP of element which will be at the leave end of the new HELE N.B. If argument 4 identifies an element which occurs later in the hanger's members list than argument 5, this will cause the new element to be created in backwards mode. This can be very useful in some circumstances. Arrive p-point/Leave p-point (e.g. 2/1) Connection/Fitting instructions: FIT CONN DIST PROP Fit the HELE into the available space (by setting HEIGHT attribute) Connect the HELE to the previous element (or HH/HT) Set the HELE at a specified distance from the previous element Set the HELE at a specified proportional distance between the previous and the next elements
6 7
DIST and PROP both have the format <keyword> <value> <p-point> (the p-point designation is optional and defaults to P0) 8 9 Angle flag. True if the component has a DDANG which needs to be deduced. Specification from which to select component: INSPEC PSPEC <gid> Select from current HSPEC Select from attached pipe PSPEC Select from explicit specification
3-251
Globals used !!CDSNHB.RINS1 !!CDSNHB.RINS2 Globals set !!CDSNHB.RTOVAL1 Derived RTO value at P1 end !!CDSNHB.RTOVAL2 Derived RTO value at P2 end Rod insertion length at P1 Rod insertion length at P2
3-252
XHBHORI:
Arguments: 1 2 3 HELE GTYP Mode FORW or BACK Connection/Fitting instructions FIT CONN DIST PROP Fit the HELE into the available space (by setting HEIGHT attribute) Connect the HELE to the previous element (or HH/HT) Set the HELE at a specified distance from the previous element Set the HELE at a specified proportional distance between the previous and the next elements
DIST and PROP both have the format <value> {<p-point>} The default p-point is P0. 4 Angle Flag to direct component arrive/leave
Globals used:
!!CDSNHB.RINS1 !!CDSNHB.RINS2
Globals set:
!!CDSNHB.RTOVAL1 - Derived RTO value for component (P1-Rod End) !!CDSNHB.RTOVAL2 - Derived RTO value for component (P2-Rod End) XHBSCLA: Arguments 1 2 3 4 SCLA STYP Any other selectors (quoted if using TANS) Fit flag. True if SCLA is to be fitted into the available space. P-point to orientate towards previous component. The subroutine will attempt to align the PA/PL, but if this in insufficient, then it will use this p-point. Default orientation is determined by argument 5. Default orientation:
3-253
TUBE STEEL 6
Steel direction (can be SCTN Y or X direction depending on hanger Tail connection type) Any other selectors (quoted if using TANS): INSPEC PSPEC <gid> Select from current HSPEC Select from attached pipe PSPEC Select from explicit specification
Globals used None Globals set !!CDSNHB.RTOVAL1 Derived RTO value at P1 end !!CDSNHB.RTOVAL2 Derived RTO value at P2 end XHBHCLN: Arguments 1 2 GTYP of element to be checked Minimum/Maximum distance: Explicit value Parameter number (e.g. PARAM 1) 3 4 P-points which min/max distance applies to (in arriveleave order) Type flag: MIN or MAX
XHBSPAC
Arguments:
Globals used
3-254
None
Hanger configuration specifications should have their purpose set to HCFG, the DESC set to indicate the configuration type (see below), and the first question set to TYPE. The answer refers to the type of pipe element which the hanger will attach to. For tube configurations, the TANS will be ANY (because an LSTU can occur after any component) and for component types, there will be a selector for each type (TEE, BEND or ELBO). The next question must be GTYP, which represents the generic type of the configuration (Welded, Base Mounted, etc.). The description is put into the TANS attribute of the next selector. The next question should be PBOR, so that the configuration specification can determine a list of configurations which can be applied to the current hanger. The last question should be STYP, and represents the actual configuration. The description is put into the TANS attribute of the relevant SPCO. There are three types of hanger configuration specification:
Template Configurations which have a fixed length and can be used to determine the positions of support steel when creating a steelwork template Tube Configurations which have variable length which can be applied to tube type hangers. Component Configurations which have variable or fixed length which can be applied to component type hangers.
Support Configurations
U
Support configurations store the following data: Attributes and UDAs DESC FUNC PURP GTYP A text description of the support configuration An optional configuration code which appears on the selection form and which may also be optionally stored in the design database when the support is configured DATA Joint type: BUTT Butt welded to joint owner BACK Back to back jointing :DESINFO Name of plotfile in the PLOT directory which illustrates the configuration and its associated parameters :DRAINFO Name of DRAFT drawing used for standard configuration types
3-255
Members The configuration CATE may own any number of TEXT elements which are used to describe the support template. The TEXT element's role is determined by the setting of the :DESCR UDA and the data is stored in the STEX attribute. The following TEXT elements are mandatory and are used to determine the numbers of support members expected before and after configuration: :DESCR = #ST STEX = <value> where <value> represents the number of stanchions expected in the final configuration and must be a non-negative integer or the letter N to indicate any number, but it can have the following modifiers: > There must be greater than zero before configuration = The number before configuration must be the same as the number specified :DESCR = #XM STEX = <value> where <value> represents the number of cross-members expected in the final configuration and must be a non-negative integer or the letter N to indicate any number, but it can have the following modifiers: > There must be greater than zero before configuration = The number before configuration must be the same as the number specified Each type of member enumerated above must be described by another TEXT element: :DESCR = <member type>_<member number> where <member type> is XM or ST and <member number> is the number of the stanchion/cross-member being described STEX = <start connection info> <end connection info> where <start connection info> takes the form S:<member at start>/<joint position>/<Attached or Owner>:<clearance code> and <end connection info> takes the form E:<member at end>/<joint position>/<joint ownership>:<clearance code> <member at start> is a support member identifier of the start connection <member at end> is a support member identifier of the end connection Member identifiers can have the following forms: <value> N < > For a specific member number Representing the Nth member The most extreme ST/XM member in the XM/ST direction The least extreme ST/XM member in the XM/ST direction
3-256
<joint position> can take one of the following values: Z S E At whatever ZDIST is required by the current position of the member At the start of the member At the end of the member
<clearance code> refers to the minimum clearance between the nearest pipe and the respective end as defined in the clearance data table: A B C Perpendicular joint at end Free end Angled (brace) joint at end
A final TEXT element stores data about the parameters, as follows :DESCR = PARAM STEX = <parameter>/<descriptor> <parameter>/<descriptor> ... where <parameter> is a single-character text string in the range AI and <descriptor> can refer to any of the following: The length of a member; e.g. ST_1 or XM_N (length of 1st stanchion or Nth crossmember) A dimension between a member and the start/end of another section; e.g. XM_1<ST_1 (distance of 1st cross-member from start of 1st stanchion) A dimension between two members; e.g. XM_1-XM_2 (distance between 1st crossmember and 2nd cross-member)
3-257
Data tables for Hangers & Supports should exist in a SPWL with PURP set to HSUP.
The Hanger Length Table is used by the application to determine the minimum and maximum Head to Tail lengths for a given configuration. This is checked every time a hanger is created, but it is most important for template-type configurations which use the minimum length to position the supporting members. The values derived from this table override the values set in the configuration CATE :MAXLEN and :MINLEN attributes. The Hanger Length Table should be in a SPEC with PURP set to HMML. An example named /CADC/HS/SAMPLE/SPEC/HANGLEN is supplied with the product. The following hierarchy is mandatory for the Hanger Length Table: SPEC QUES :VISI PURP DESC PBOR false HMML <optional text description>
3rd Level of SELE TANS QUES SPCO level ANS TANS COMM * ** <length type code> ** <hanger configuration type code> *** <min length>/<max length> (including units, e.g. 0mm/60mm) <pipe material code> * HTYP
Material codes are defined in the application defaults from the Settings>Admin>Materials menu option. This can be set to 0 or 1:
3-258
1 Lengths are calculated from outside of pipe. This is the default mode if a configuration is not defined in the Hanger Length Table. 0 Lengths are calculated from the C/L of the pipe. In this mode, the application selects the PCLA to calculate the minimum length when creating support templates. *** Code corresponds to the Hanger Build Macro suffix and the GTYP of the configuration CATE.
This table is used at two stages during the creation of a support (with steelwork). First when initially applying a configuration to deduce the lengths of the supporting members, and again when the profiles have been selected to maintain the minimum clearance between hanger attachment points and supporting member ends. There are three types of clearance code, depending on the type of joint at the member end: A1 Free end (no joint) before profiles set A2 Free end after profiles set B Perpendicular joint
C1 Angled end (braced free end - only really used in the Braced Cantilever type configuration) before profiles set C2 Angled end after profiles set The following hierarchy is mandatory for the Hanger Clearance Table: SPEC QUES :VISI PURP PBOR false HCLR
DESC <optional text description> 1st Level of SELE ANS <pipe nominal bore>
QUES CTYP 2nd Level of SELE TANS QUES SPCO Level TANS COMM * <hanger configuration type code> * <clearance> (measured from pipe C/L including units, e.g. 75mm) <clearance code> HTYP
Code corresponds to the Hanger Build Macro suffix and the GTYP of the configuration CATE
3-259
Some users base maximum unsupported spans for pipes on Span Tables. The Hangers & Supports application provides a method whereby these tables can be entered into a data table and the maximum spans can be graphically indicated in the 3D model by partially highlighting the supported branches. The PURP attribute of the Span Table SPEC should be set to HSPT, the :VISI set to false, and the DESC attribute may have an optional description text. The hierarchy for this data table is variable, depending on the number of parameters which you wish to cross-reference, but the format is as follows: At SELE/SPCO Owner TDEF <expression> This expression can be anything which yields a single numeric or text value based on the current HANGER. It is recommended that the supplied user function SELEATT be used, as this will return the value of any attribute or any pseudo-attribute of any part of the hanger or related support or pipe. For example: USRFUNC (SELEATT ATTA LBOR) returns the leave bore of the ATTA. USRFUNC (SELEATT ATTA $<part (RTEX of DETREF of LSTU , 2)$>) returns the schedule of the attached pipe (for the standard AVEVA pipe specs). USRFUNC (SELEATT BRAN TEMP) returns the temperature rating of the attached branch. (See the internal macro documentation of SELEATT for further details of this function.) At SELE/SPCO TANS <test> This test is used for the data returned by the owner's TDEF expression to yield a logical true or false. Suitable tests might be (for the above examples): eq 20 eq 'SCH80' (notice the use of quotes '...' and not vertical bars |...| ) lt 177 Tests are performed in list order, so if multiple matches are possible, the first is assumed. In this way, ranges can be defined (as with the temperature example above) by using lt or gt and putting the test values in increasing or decreasing order as applicable. The actual span is stored in the COMM attribute of the SPCO. The application will return an error value if matches cannot be made from the Span Table.
3-260