Professional Documents
Culture Documents
Patch Management For Windows 7.5 User Guide
Patch Management For Windows 7.5 User Guide
Altiris Patch Management Solution for Windows 7.5 from Symantec User Guide
The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the agreement.
Legal Notice
Copyright 2013 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and the Checkmark Logo, Altiris, and any Altiris or Symantec trademarks used in the product are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. This Symantec product may contain third party software for which Symantec is required to provide attribution to the third party (Third Party Programs). Some of the Third Party Programs are available under open source or free software licenses. The License Agreement accompanying the Licensed Software does not alter any rights or obligations you may have under those open source or free software licenses. For more information on the Third Party Programs, please see the Third Party Notice document for this Symantec product that may be available at http://www.symantec.com/about/profile/policies/eulas/, the Third Party Legal Notice Appendix that may be included with this Documentation and/or Third Party Legal Notice ReadMe File that may accompany this Symantec product. The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation and its licensors, if any. THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE. The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights in Commercial Computer Software or Commercial Computer Software Documentation", as applicable, and any successor regulations. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.
Technical Support
Symantec Technical Support maintains support centers globally. Technical Supports primary role is to respond to specific queries about product features and functionality. The Technical Support group also creates content for our online Knowledge Base. The Technical Support group works collaboratively with the other functional areas within Symantec to answer your questions in a timely fashion. For example, the Technical Support group works with Product Engineering and Symantec Security Response to provide alerting services and virus definition updates. Symantecs support offerings include the following:
A range of support options that give you the flexibility to select the right amount of service for any size organization Telephone and/or Web-based support that provides rapid response and up-to-the-minute information Upgrade assurance that delivers software upgrades Global support purchased on a regional business hours or 24 hours a day, 7 days a week basis Premium service offerings that include Account Management Services
For information about Symantecs support offerings, you can visit our website at the following URL: www.symantec.com/business/support/ All support services will be delivered in accordance with your support agreement and the then-current enterprise technical support policy.
Available memory, disk space, and NIC information Operating system Version and patch level Network topology Router, gateway, and IP address information Problem description:
Error messages and log files Troubleshooting that was performed before contacting Symantec Recent software configuration changes and network changes
Customer service
Customer service information is available at the following URL: www.symantec.com/business/support/ Customer Service is available to assist with non-technical questions, such as the following types of issues:
Questions regarding product licensing or serialization Product registration updates, such as address or name changes General product information (features, language availability, local dealers) Latest information about product updates and upgrades Information about upgrade assurance and support contracts Information about the Symantec Buying Programs Advice about Symantec's technical support options Nontechnical presales questions Issues that are related to CD-ROMs, DVDs, or manuals
Contents
Technical Support ............................................................................................... 4 Chapter 1 Introducing Patch Management Solution for Windows ...........................................................................
9
About Patch Management Solution for Windows ................................... 9 How Patch Management Solution for Windows works .......................... 10 Components of Patch Management Solution for Windows .................... 11 Where to get more information ........................................................ 12
Chapter 2
Chapter 3
Contents
Chapter 4
Appendix A
Appendix B
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices ............................................................................. 39
Third-Party Legal Attributions .......................................................... CabDotNet .................................................................................. XML-RPC.NET ............................................................................ MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1 ........... 39 40 40 41
Index
.................................................................................................................... 47
Chapter
About Patch Management Solution for Windows How Patch Management Solution for Windows works Components of Patch Management Solution for Windows Where to get more information
Introducing Patch Management Solution for Windows How Patch Management Solution for Windows works
10
7-Zip Adobe Systems AOL Inc Apple Citrix Systems Foxit Corporation Google Hewlett-Packard Microsoft Mozilla Nullsoft Opera Software Oracle RealNetworks RealVNC Research In Motion Skype Technologies S.A. Sun Microsystems WinZip
Introducing Patch Management Solution for Windows Components of Patch Management Solution for Windows
11
information. From this inventory, Patch Management Solution for Windows creates specific filters to target only the computers requiring individual software updates. You use the Distribute Software Updates wizard to automate the downloading and distribution of software updates. Instead of creating a policy for each individual software update, you use this wizard to create a single policy for the relevant software bulletins. You can add multiple software bulletins to a policy. If you want to, you can modify any default settings and command-line options in a software update policy. When you download a software bulletin, each associated software update executable is downloaded from the vendor to the Notification Server computer. From the information in software bulletin executables, Patch Management Solution for Windows then creates a software update package for each software update. From the downloaded software bulletins, you then create software update policies to distribute software update packages to the appropriate computer filters. When a managed computer receives a software update policy, it verifies that the update is needed, then downloads the software update package from the Notification Server computer or a package server. The managed computer then installs the update. At an interval, the software update policy is re-evaluated and software updates are reinstalled if needed. For example, if an operation removes a software update, it is reinstalled. Or if a vendor revises a software update, it is reinstalled. After the software update plug-in distributes software updates, it sends results of patch deployment to the Notification Server computer. This information can be viewed through reports and the Dashboard.
Introducing Patch Management Solution for Windows Where to get more information
12
a restart, then the computer is restarted after the update is installed. Service Packs are installed before other software updates. When a software update has been superseded and rendered obsolete by another update or updates, the later update is installed. The software vendor assigns severity levels to software updates, but you can also create a custom severity level. See Creating and assigning custom severity levels on page 26. Warning: You must ensure that each software update works correctly in your environment before deploying it. Symantec recommends that you first distribute any required software update in a test environment before deploying it to your production environment.
Description
Information about new features and important issues.
User Guide
Information about how to use this product, including detailed technical information and instructions for performing common tasks.
The Documentation Library, which is available in the Symantec Management Console on the Help menu. The Supported Products A-Z page, which is available at the following URL: http://www.symantec.com/business/support/index?page=products Open your product's support page, and then under Common Topics, click Documentation.
Introducing Patch Management Solution for Windows Where to get more information
13
Description
Information about how to use this product, including detailed technical information and instructions for performing common tasks. Help is available at the solution level and at the suite level. This information is available in HTML help format.
Click the page and then press the F1 key. Use the Context command, which is available in the Symantec Management Console on the Help menu.
In addition to the product documentation, you can use the following resources to learn about Symantec products. Table 1-2 Resource Description Symantec product information resources Location
http://www.symantec.com/business/theme.jsp?themeid=support-knowledgebase
SymWISE Articles, incidents, and Support issues about Symantec Knowledgebase products.
Introducing Patch Management Solution for Windows Where to get more information
14
Description
An online resource that contains forums, articles, blogs, downloads, events, videos, groups, and ideas for users of Symantec products.
Deployment and Imaging http://www.symantec.com/connect/groups/deployment-and-imaging Discovery and Inventory http://www.symantec.com/connect/groups/discovery-and-inventory ITMS Administrator http://www.symantec.com/connect/groups/itms-administrator Mac Management http://www.symantec.com/connect/groups/mac-management Monitor Solution and Server Health http://www.symantec.com/connect/groups/monitor-solution-and-server-health Patch Management http://www.symantec.com/connect/groups/patch-management Reporting http://www.symantec.com/connect/groups/reporting ServiceDesk and Workflow http://www.symantec.com/connect/workflow-servicedesk Software Management http://www.symantec.com/connect/groups/software-management Server Management http://www.symantec.com/connect/groups/server-management Workspace Virtualization and Streaming http://www.symantec.com/connect/groups/ workspace-virtualization-and-streaming
Chapter
Action
Install or upgrade the solution.
Implementing Patch Management Solution for Windows Preparing your environment for Patch Management
16
Table 2-1
Process for implementing Patch Management Solution for Windows (continued) Description
Install or upgrade the Symantec Management Agent on every computer to which you want to send patches. For more information, see the topics about installing or upgrading the Symantec Management Agent in the IT Management Suite Administration Guide. See Where to get more information on page 12.
Step
Step 2
Action
Install or upgrade the Symantec Management Agent.
Step 3
Install the plug-in that manages all of the Patch Management Solution for Windows functionality on a client computer. See Installing the software update plug-in on page 16. See Upgrading the software update plug-in on page 24.
Step 4
(Optional) Configure the software update files storage location settings. See Configuring software updates download location on page 25.
Step 5
Configure the software (Optional) updates installation settings. Configure the time when you want to perform software update installation and computer restarts. See Configuring software updates installation settings on page 27.
Step 6
(Optional) Configure when to run the system assessment scan, which inventories managed computers for the software updates that they require. See Configuring the system assessment scan interval on page 27.
Step 7
Download the Windows software updates metadata and configure the metadata update schedule. See Downloading the Windows software updates catalog on page 18.
Implementing Patch Management Solution for Windows Preparing your environment for Patch Management
17
software update plug-in ensures that the update is applicable and not already installed, and then installs it. After you install the software update plug-in on a managed computer, the Software Updates tab appears on the Symantec Management Agent user interface. This tab displays the status software updates for that computer. To open the Symantec Management Agent user interface, click the Symantec Management Agent icon in the system tray of the managed computer. See Installing the software update plug-in on page 16. The software update plug-in manages all of the Patch Management Solution functionality on a client computer. Note: If you have a large number of computers on which to install the software update plug-in, consider deploying it during off-peak hours to minimize network traffic. Deploying the software update plug-in can take some time, depending on the number of managed computers and the Symantec Management Agent settings. See Preparing your environment for Patch Management on page 15. To install the software update plug-in
1 2 3
In the Symantec Management Console, on the Actions menu, click Agents/Plug-ins > Rollout Agents/Plug-ins. In the left pane, expand Software > Patch Management > Software Update Plug-in Install. (Optional) In the right pane, make any necessary changes. For help, press F1 or, on the Help menu, click Context.
4 5
At the upper right of the page, click the colored circle, and then click On. Click Save changes.
The next step is to configure the Patch Management Solution core settings. See Configuring software updates download location on page 25.
Implementing Patch Management Solution for Windows Preparing your environment for Patch Management
18
1 2 3 4 5
In the Symantec Management Console, on the Settings menu, click All Settings. In the left pane, click Software > Patch Management. Click Windows Settings > Windows Patch Remediation Settings. In the right pane, make any wanted changes, or leave the default values. Click Save changes.
1 2 3 4
In the Symantec Management Console, on the Manage menu, click Jobs and Tasks. In the left pane, expand Jobs and Tasks > System Jobs and Tasks > Software > Patch Management > Import Patch Data for Windows. In the right pane, under Vendors and Software, click Update. When the available products list import is complete, under Vendors and Software, check the software for which you want to download the patch management metadata. (Optional) Make any other necessary changes.
19
6 7 8
Click Save changes. Under Task Status, click New Schedule. In the New Schedule dialog box, click Now, and then click Schedule.
1 2
On the Import Patch Data for Windows page, under Task Status, click New Schedule. In the New Schedule dialog box, click Schedule, and then configure a schedule on which to run this task. Symantec recommends that you configure this task to run daily.
Click Schedule.
Action
Run compliance and vulnerability reports
Step 2
View which software bulletins you need to install, then download updates and create software update policies. See Downloading and distributing software updates on page 21. See Staging software bulletins on page 29.
Step 3
Evaluate the results by running the Software Update Delivery Summary report and revisiting compliance reports. See Viewing software update delivery results on page 23.
20
Compliance reports Compliance reports let you quickly determine which software updates your managed computers require. Compliance reports are used to determine if the computers are up-to-date with the latest software updates. These reports are also used to check if a particular software bulletin or update is installed on your managed computers. This capability is useful if a specific security issue affects your network environment, and a certain update addresses the problem. Diagnostics reports The diagnostics reports display vulnerability summary and software update plug-in installation information. Remediation status The remediation status reports summarize and detail software update reports associations and activities. Software bulletins reports The software bulletins reports summarize and detail software bulletins activity and status.
1 2 3
In the Symantec Management Console, on the Reports menu, click All Reports. In the left pane, expand Software > Patch Management. Click the report that you want to view. For example, click Compliance > Windows Compliance by Bulletin.
21
4 5
In the right pane, leave the default settings, and then click Refresh. If you want to view more information about an update, right-click any update, and then click Resource Manager. Each type of compliance report opens a different Resource Manager, depending on the type of results. For example, the Windows Compliance by Computer report opens a computer-type Resource Manager. When you open a Resource Manager for a software update, you can click Summaries > Software Bulletin Details, and, under Additional Information, you can find a hyperlink to the Microsoft TechNet article on the bulletin.
The next step is to review and distribute available software updates. See Downloading and distributing software updates on page 21. See Staging software bulletins on page 29.
22
The Distribute Software Updates wizard lets you create software update policies. If the associated software updates are not yet downloaded, Patch Management Solution creates a download task. When download is completed, the software update policy is distributed to the target computers. If you want to install a Service Pack, Symantec recommends that you create a software update policy for this service pack only, without any other bulletins included in it. Also, in the wizard, check the Allow immediate restart if required box. The policies that you create are stored in the Manage > Policies > Software > Patch Management > Software Update Policies folder. You can view the details of the policy and change settings if necessary. You can view the software update policies distribution results in reports. See Viewing software update delivery results on page 23. See Preparing your environment for Patch Management on page 15. Before you perform this step, ansure that you have run the compliance and vulnerability reports. See Running compliance and vulnerability reports on page 20. To distribute software updates
1 2
In the Symantec Management Console, on the Actions menu, click Software > Patch Remediation Center. In the right pane, in the Show drop-down box, click Windows Compliance by Bulletin, and then click the Refresh symbol. These reports let you see which updates the target computers require.
Click the bulletins that you want to distribute. For example, click the bulletins that have a high number in the Not Installed column. You can select multiple items while holding down the Shift or Control key.
4 5 6 7 8
Right-click the selected bulletins, and then click Distribute Packages. (Optional) Configure the settings as needed. Click Next. (Optional) On the second page of the wizard, check the updates that you want to distribute. At the upper right of the page, click the colored circle, and then click On. You can also turn on the policy later.
23
1 2 3
In the Symantec Management Console, on the Reports menu, click All Reports. In the left pane, expand Software > Patch Management > Remediation Status, and then click Windows Software Update Delivery - Details. In the right pane, leave the default settings, and then click Refresh.
Chapter
Upgrading the software update plug-in Uninstalling the software update plug-in Configuring software updates download location Creating and assigning custom severity levels Configuring software updates installation settings Configuring the system assessment scan interval Relocating or checking the integrity of software update packages Staging software bulletins
25
1 2 3
In the Symantec Management Console, on the Actions menu, click Agents/Plug-ins > Rollout Agents/Plug-ins. In the left pane, click Software > Patch Management > Software Update Plug-in Upgrade. (Optional) In the right pane, make any wanted changes. For help, press F1 or click Help > Context.
4 5
The next step is to configure the Patch Management Solution core settings. See Configuring software updates download location on page 25.
1 2 3
In the Symantec Management Console, on the Actions menu, click Agents/Plug-ins > Rollout Agents/Plug-ins. In the left pane, click Software > Patch Management > Software Update Plug-in Uninstall. (Optional) In the right pane, make any wanted changes. For help, press F1 or click Help > Context.
4 5
26
The settings that you configure apply to Windows and Linux components of Patch Management Solution. See Preparing your environment for Patch Management on page 15. Before you perform this step, ensure that you have installed or upgraded the software update plug-in. See Installing the software update plug-in on page 16. See Upgrading the software update plug-in on page 24. To configure software updates download location
1 2 3 4
In the Symantec Management Console, on the Settings menu, click All Settings. In the left pane, expand Software > Patch Management > Core Services. In the right pane, on the Locations tab, specify the software updates download location. Click Save Changes.
If you change the location and you want to relocate existing software update packages, use the Check Software Update Package Integrity task. See Relocating or checking the integrity of software update packages on page 28. The next step is to configure the software updates installation settings.
1 2 3 4
In the Symantec Management Console, on the Settings menu, click All Settings. In the left pane, expand Software > Patch Management > Core Services. In the right pane, click the Custom Severity tab. On the Custom Severity tab, in the Severity Level box, type the name that you want to give the custom severity level. For example, "Install right away!"
27
5 6 7
Click Add. Click Move Up or Move Down to position the custom severity levels in the list. Click Save Changes.
1 2 3 4
In the Symantec Management Console, on the Actions menu, click Software > Patch Remediation Center. On the Patch Remediation Center page, in the software bulletin list, right-click a software bulletin, and then click Custom Severity. Click a severity level. Click Refresh to view the new data in the Custom Severity column.
1 2 3
In the Symantec Management Console, on the Settings menu, click All Settings. In the left pane, expand Agents/Plug-ins > Software > Patch Management > Windows > Default Software Update Plug-in Policy. In the right pane, configure when and how you want to install the updates, or leave the default values. Click Save changes.
Performing Advanced Configuration Relocating or checking the integrity of software update packages
28
1 2 3
In the Symantec Management Console, on the Settings menu, click All Settings. In the left pane, expand Software > Patch Management > Windows System Assessment Scan. In the right pane, under Schedule, configure how often you want the software update plug-in to perform the system assessment scan on the managed computers and report it back to Notification Server. If you want the plug-in to report inventory only if it has changed, check Send Inventory Results Only if Changed . This option is checked by default.
5 6
Do not change the targeted filter from Windows Computers with Software Update Plug-in Installed Target unless you have a specific reason to do so. Click Save changes.
1 2 3
In the Symantec Management Console, on the Manage menu, click Jobs and Tasks. In the left pane, expand System Jobs and Tasks > Software > Patch Management, and then click Check Software Update Package Integrity. If you want to delete the downloaded updates that are not part of any software update policy or belong to a superseded bulletin, check Delete the updates that are no longer in use from the file system.
29
If you changed the Software Update Package Location value on the Core Services page and want to relocate downloaded updates, check Relocate existing packages if default Software Update package location on Core Services page has changed. Under Task Status, click New Schedule and specify a schedule on which to run the task.
1 2
In the Symantec Management Console, on the Actions menu, click Software > Patch Remediation Center. In the right pane, in the Show drop-down box, click Windows Compliance by Bulletin, and then click the Refresh symbol. These reports let you see which updates the client computers require.
Click the bulletins that you want to download. For example, click the bulletins that have a high number in the Not Installed column. You can select multiple items while holding down the Shift or Control key.
Right-click the selected bulletins, and then click Download Packages. You can close the status dialog box; the download continues in the background.
30
1 2 3
In the Symantec Management Console, on the Manage menu, click Jobs and Tasks. In the left pane, expand System Jobs and Tasks > Software > Patch Management > Download Software Update Package. In the right pane, view the status of download tasks.
The next step is to view the results. See Viewing software update delivery results on page 23.
Chapter
About replicating Patch Management Solution for Windows data in hierarchy Replicating patch management language alerts Replicating the software updates catalog Replicating a software update policy
Replicating Patch Management Solution for Windows data in hierarchy Replicating patch management language alerts
32
Notification Server, if the Package Distribution section on the Windows Patch Remediation Settings page is editable on the child Notification Server. If you enable this feature on the parent Notification Server, and then replicate it down to the child Notification Servers, the Windows Patch Remediation Settings page becomes editable on these child Notification Servers. This means that these settings can then be managed on the child Notification Servers independently from the parent Notification Server. If you disable this feature on the parent Notification Server, and the replicate this change down the hierarchy, the Windows Patch Remediation Settings page becomes read-only on the child Notification Servers and the corresponding settings then become inherited from the parent Notification Server. See About hierarchy and data replication direction on page 36. Before you can replicate data, you must run the Patch Management Language Alerting rule. See Replicating patch management language alerts on page 32. See Replicating the software updates catalog on page 33. See Replicating a software update policy on page 34.
1 2 3
On the child Notification Server computer, in the Symantec Management Console, on the Settings menu, click Notification Server > Hierarchy. In the left pane, click Hierarchy > Hierarchy Management. In the right pane, click the Replication tab.
Replicating Patch Management Solution for Windows data in hierarchy Replicating the software updates catalog
33
4 5 6 7
Expand the Resources section. Click Patch Management Language Alerting. Click the Edit symbol. Set a schedule to run before running other patch management replication functions.
1 2 3 4 5 6
On the parent Notification Server computer, in the Symantec Management Console, on the Settings menu, click Notification Server > Hierarchy. In the left pane, select Hierarchy > Hierarchy Management. In the right pane, click the Replication tab. Expand the Resources section. Click Patch Management Import Data Replication for Windows. Click the Edit symbol.
Replicating Patch Management Solution for Windows data in hierarchy Replicating a software update policy
34
Under Replicate, select Differential if you want to only replicate changed or new data. Select Complete to send all Windows patch management software update catalog files to child Notification Server computers each time the task runs. Under Schedule, set the schedule a few hours after the Patch Management Language Alerting rule schedule. Under Data Verification, specify a percentage of data to be verified during each replication, and check Verify data integrity if you want.
8 9
Replicating Patch Management Solution for Windows data in hierarchy Replicating a software update policy
35
See About replicating Patch Management Solution for Windows data in hierarchy on page 31. To replicate a software update policy manually
1 2 3
In the Symantec Management Console, on the Manage menu, click Policies. In the left pane, expand Software > Patch Management > Software Update Policies. Right-click a policy or a folder, and then click Hierarchy > Replicate Now.
Appendix
Technical reference
This appendix includes the following topics:
About hierarchy and data replication direction About Patch Management Solution security roles
Item
All the server tasks settings and schedules:
Check Software Update Package Integrity Import Patch Data for Windows/Red Hat/Novell
Run System Assessment Scan on Windows/Linux Computers Down task settings and schedules Windows/Linux System Assessment Scan policy settings Windows/Red Hat/Novell Patch Remediation Settings policy Down Down
37
Table A-1
Items that are replicated by the default Notification Server replication schedule with no custom replication rules (continued) Replication direction
Down Down
Item
Default Software Update Plug-in Policy settings Software update plug-in install, upgrade, and uninstall policy settings Software update policies
Down
Items that are replicated with custom replication rules Replication direction Description
This information is replicated when the Patch Management Language Alerting rule is enabled. This information is replicated when the Patch Linux OS Channel Resource Replication Rule is enabled. This information is replicated when the Patch Management Import Data Replication for Windows/Red Hat/Novell rules are enabled. For Windows, only the updates and bulletins that are associated with the child computer's supported languages are replicated. For Linux, only the metadata for the channels that are relevant to the child Notification Server's client computers is replicated.
Language support information Up (Patch for Windows only) OS inventory data (Patch for Linux only) Patch management metadata Down Up
Compliance summary
Up
This information is replicated when the Patch Compliance Summary Replication rule is enabled. The system assessment scan result is replicated up as a summary.
38
Users with the Patch Management Administrators role have full access to Patch Management Solution functionality, but no access to the rest of the Symantec Management Console. Users with the Patch Management Rollout role have limited access to the following Patch Management Solution functionality:
Users with the Patch Management Rollout role can perform the following actions:
Enable, disable, and change settings in the software update policies. View reports.
Appendix
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices
This appendix includes the following topics:
Third-Party Legal Attributions CabDotNet XML-RPC.NET MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices CabDotNet
40
CabDotNet
MIT License This code is licensed under the license terms below, granted by the copyright holder listed above. The term copyright holder in the license below means the copyright holder listed above. Copyright (c) 2005-2006, Jim Mischel Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
XML-RPC.NET
MIT License This code is licensed under the license terms below, granted by the copyright holder listed above. The term copyright holder in the license below means the copyright holder listed above. Charles Cook Copyright (c) 2006 Charles Cook The MIT License Copyright (c) 2006 Charles Cook Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
41
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
MICROSOFT SOFTWARE LICENSE TERMS These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you. Please read them. They apply to the software named above, which includes the media on which you received it, if any. The terms also apply to any Microsoft:
for this software, unless other terms accompany those items. If so, those terms apply. By using this software, you accept these terms. If you do not accept them, do not use the software. If you comply with these license terms, you have the rights below:
USE RIGHTS.
Use. You may install the software on any number of devices to design, develop and test your programs that run on a Microsoft Windows operating system. Other Microsoft Programs. The software contains other Microsoft programs. The license terms with those programs apply to your use of them.
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
42
Distributable Code. The software contains code that you are permitted to copy and distribute in programs you develop if you comply with the terms below.
Right to Use and Distribute. The code and text files listed below are Distributable Code. You may:
REDIST.TXT Files. Copy and distribute the object code form of code listed in REDIST.TXT files; Sample Code. Modify, copy and distribute the source and object code form of code marked as sample except for files identified as MFCs, ATLs and CRTs (see below); MFCs, ATLs and CRTs. Modify the source code form of Microsoft Foundation Classes (MFCs), Active Template Libraries (ATLs), and C runtimes (CRTs) to design, develop and test your programs, and copy and distribute the object code form of your modified files under a new name; and Third Party Distribution. Permit distributors of your programs to copy and distribute the Distributable Code as part of those programs.
Distribution Requirements. For any Distributable Code you distribute, you must:
add significant primary functionality to it in your programs; only invoke the software via interfaces described in the software documentation; for any Distributable Code having a filename extension of .lib, distribute only the results of running such Distributable Code through a linker with your application; distribute Distributable Code included in a setup program only as part of that setup program without modification; require distributors and external end users to agree to terms that protect it at least as much as this agreement; display your valid copyright notice on your programs; for Distributable Code from the Windows Media Services SDK portions of the software, include in your programs Help-About box (or in another obvious place if there is no box) the following copyright notice: Portions utilize Microsoft Windows Media Technologies. Copyright (c) 1999-2005 Microsoft Corporation. All Rights Reserved; and
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
43
indemnify, defend, and hold harmless Microsoft from any claims, including attorneys fees, related to the distribution or use of your programs.
alter any copyright, trademark or patent notice in the Distributable Code; use Microsofts trademarks in your programs names or in a way that suggests your programs come from or are endorsed by Microsoft; distribute Distributable Code to run on a platform other than the Windows platform; include Distributable Code in malicious, deceptive or unlawful programs; or modify or distribute the source code of any Distributable Code so that any part of it becomes subject to an Excluded License. An Excluded License is one that requires, as a condition of use, modification or distribution, that:
the code be disclosed or distributed in source code form, or others have the right to modify it.
TRANSFER. The first user of the software may transfer it and this agreement directly to a third party. Before the transfer, that party must agree that this agreement applies to the transfer and use of the software. The first user must uninstall the software before transferring it separately from the device. The first user may not retain any copies. BACKUP COPY. You may make one backup copy of the software. You may use it only to reinstall the software. DOCUMENTATION. You may copy and use the documentation for your internal, reference purposes. EXPORT RESTRICTIONS. The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see www.microsoft.com/exporting. SUPPORT SERVICES. Because this software is as is, we may not provide support services for it. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you some rights to use the software. Microsoft reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may
3 4 5
6 7
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
44
use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways. You may not:
work around any technical limitations in the software, reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation, make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation, publish the software for others to copy, rent, lease or lend the software, or use the software for commercial software hosting services.
ENTIRE AGREEMENT. This agreement and the terms for supplements, updates, Internet-based services and support services that you use are the entire agreement for the software and support services. APPLICABLE LAW.
United States. If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles. The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort. Outside the United States. If you acquired the software in any other country, the laws of that country apply.
10 LEGAL EFFECT. This agreement describes certain legal rights. You may have
other rights under the laws of your country. You may also have rights with respect to the party from whom you acquired the software. This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
45
anything related to the software, services, content (including code) on third party Internet sites, or third party programs, and claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.
It also applies even if Microsoft knew or should have known about the possibility of the damages. The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages. Please note: As this software is distributed in Quebec, Canada, some of the clauses in this agreement are provided below in French. Remarque: Ce logiciel tant distribu au Qubec, Canada, certaines des clauses dans ce contrat sont fournies ci-dessous en franais. EXONRATION DE GARANTIE. Le logiciel vis par une licence est offert tel quel . Toute utilisation de ce logiciel est votre seule risque et pril. Microsoft naccorde aucune garantie ou condition expresse. Vous pouvez disposer de droits de consommateur additionnels que vous confrent vos lois locales, que la prsente licence ne peut modifier. Dans la mesure permise par vos lois locales, les garanties implicites de qualit marchande, dadaptation un usage particulier et dabsence de contrefaon sont exclues. LIMITATION DES DOMMAGES-INTRTS ET EXCLUSION DE RESPONSABILIT POUR LES DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de dommages directs uniquement hauteur de 5,00 $ US. Vous ne pouvez prtendre aucune indemnisation pour les autres dommages, y compris les dommages spciaux, indirects ou accessoires et pertes de bnfices. Cette limitation concerne:
toute matire relie au logiciel, aux services ou au contenu (y compris le code) figurant sur des sites Internet dune tirce partie ou dans des programmes dune tirce partie, et les rclamations au titre de violation de contrat ou de garantie, ou au titre de responsabilit stricte, de ngligence ou dune autre faute dans la limite autorise par la loi en vigueur.
Elle sapplique galement, mme si Microsoft connaissait ou devrait connatre lventualit dun tel dommage. Si votre pays nautorise pas lexclusion ou la limitation de responsabilit pour les dommages indirects, accessoires ou de quelque nature que ce soit, il se peut que la limitation ou lexclusion ci-dessus ne sappliquera pas votre gard. EFFET JURIDIQUE. Le prsent contrat dcrit certains droits juridiques. Vous pourriez avoir dautres droits prvus par les lois de votre pays. Le prsent contrat
Altiris Patch Management Solution for Windows 7.5 from Symantec Third-Party Legal Notices MICROSOFT PLATFORM SOFTWARE DEVELOPMENT KIT FOR MICROSOFT WINDOWS SERVER 2003 SERVICE PACK 1
46
ne modifie pas les droits que vous confrent les lois de votre pays si celles ci ne le permettent pas.
Index
A
analyzing vulnerabilities. See assessing systems assessing systems 27 assigning severity levels 26
I
Import Patch Data for Windows task about 18 installing software update plug-in 16 inventory collecting. See system assesment scan
C
Check Software Update Package Integrity task about 28 checking package integrity 28 compliance analysis. See system assesment scan configuring Patch Management Solution core settings 25 severity levels 26 updates installation settings 27 Windows remediation settings 17 context-sensitive help 12 Core Services settings configuring 25
P
patch management import data. See patch management metadata Patch Management Import Data Replication rule configuring 33 Patch Management Language Alerting rule configuring 32 patch management metadata downloading 18 replicating 33 Patch Management Solution for Windows about 9 distributing software updates 19 implementing 15 overview 10 recommended workflow 15 patching recommended workflow 15 PMImport. See patch management metadata
D
Distribute Software Updates wizard 21 distributing software bulletins viewing update summary reports 23 distributing software updates 21 documentation 12 download location 25 downloading patch management metadata 18 software updates catalog 18 downloading and distributing software updates 21 downloading software updates 29
R
Release Notes 12 relocating packages 28 replicating data in hierarchy 3132, 34 replicating software update policies 34 replication direction 36 reports compliance 20 diagnostic 20 remediation status 20 software bulletin 20 viewing 20
H
help context-sensitive 12 hierarchy replicating data 3132, 34 replicating patch management metadata 33 replicating software updates catalog 33
Index
48
restarts configuring 27
S
security roles 38 severity levels assigning 26 configuring 26 software bulletins configuring installation settings 27 viewing update summary reports 23 software update plug-in about 16 installing 16 uninstalling 25 upgrading 24 software update policy replicate now 34 replicating 34 software updates computer restart time 27 distributing 21 downloading 29 downloading and distributing 21 installation settings 27 installation time 27 software updates catalog downloading 18 replicating 33 staging software updates. See downloading system assesment scan configuring 27
U
uninstalling software update plug-in 25 upgrading software update plug-in 24
V
vulnerability analysis. See system assesment scan
W
Windows Patch Remediation Settings page 17 Windows remediation settings configuring 17 Windows System Assessment Scan page about 27