Professional Documents
Culture Documents
Backhoe Swing Tower and Boom
Backhoe Swing Tower and Boom
Case Construction 621 State Street customerassistancecenter .na@cnh.comRacine, Wisconsin 53404 866-542-2736 x1
(580SL) - LOADER BACKHOE > (9-036) - BACKHOE SWING TOWER AND BOOM Diag # 1 Part # REF Name INSTRUCTION Description Qty
SWING TOWER - backhoe, with inner ears, 1 see Figure 9-034 for swing tower and bushings - swing, Serial Range: tower-boom 2
121779A1
PIN
Ref. Item 2 - If looking for a Ref. Item 2 - If looking for a 2 piece pin and 1 2 piece pin and bracket the bracket the part nos are: pin is 250663a1 part nos are: pin is and the bracket is 303646a1 250663a1 and the bracket is 303646a1 3 4 5 6 7 8 9 219-1 604-20040 496-41081 122897A1 H71514 R32119 144200A1 LUBE NIPPLE,1/8"-27 x .66 FITTING - grease, straight, 1/8 PT x 21/32 2 lg inch BOLT,Hex, M20 x 40mm, Cl - hex, self-locking, 20-2.5 x 40 mm, 2 8.8 replaces 614-20040 used on some models WASHER,13/16" x 1 3/4" x - flat, 13/16 x 1-3/4 x 7/32 inch, hardened 2 .219", HDN SPACER WASHER WASHER CYLINDER ASSY. - 21 x 32 x 12 mm - special, boom to swing tower SHIM - 71 (2-13/16) ID x 114 mm (4-1/2 inch) 2 1 1
CYLINDER ASSEMBLY - 127 (5) ID x 842 1 mm (33-5/32 inch) stroke, boom, parts list Figure 8-160 - backhoe, service replacement, Includes: 1 Ref. 11 - 14 - 70 (2-3/4) ID x 34 mm (1-5/16 inch) long 2 - 70 (2-3/4) ID x 44 mm (1-3/4 inch) long, 1 with slot for groove pin, right-hand side of boom at boom to dipper pivot - 70 (2-3/4) ID x 44 mm (1-3/4 inch) long, without slot for groove pin, left-hand side of boom at boom to dipper pivot - plastic CYLINDER ASSEMBLY - 5 (127) ID x 23 inch (583 mm) stroke, dipper, for correct assembly and components, see Figure 8-162 or 8-164 , Serial Range: Boom-dipper 1
10 11 12
13
D137218
BUSHING
14 15
D120450 REF
PLUG INSTRUCTION
7 1
16 17 18 19
PIN
LUBE NIPPLE,1/8"-27 x .66 FITTING - grease, straight, 1/8 PT x 21/32 2 lg inch GROOVED PIN,1/2" x 3 1/4", Type E, Hardened SHIM,1.57mm Thk Pin, Grooved, , center groove 1/2" x 3 1/4", 1 Type E, Hardened (M72 ID x 89 OD), Boom to dipper 1.57mm 1 Thk
Diag # 20 21 22 23
Description
Qty
(M72 ID x 89 OD), Boom to dipper 3.05mm 1 Thk - flat, hardened, special - hex flange, special, 1-3/4 inch NF 1 1
- dipper cylinder to boom, without center 1 lubrication groove, used with 126151A1 or 183795A1 dipper cylinder, if used - dipper cylinder to boom, with center lubrication groove, used with 183795A2 dipper cylinder, if used SHIM - 57 x 76 x 1.5 mm RING - external retaining, No. 55, pin retaining - boom cylinder closed, Serial Range: end-boom Boom cylinder rod end to swing tower Ring, Snap, , Pin #237, Ext - special, 62 mm ID - Dipper cylinder rod, Serial Range: end-dipper 1
23A
123167A2
PIN
24 25 26 27 28 29 30 31 32 33
H433285 800-4155 123168A1 190313A1 103-11237 123318A1 D138022 495-81227 495-81226 103-16175
SPACER SNAP RING,M55, Ext PIN PIN SNAP RING,#237, Ext WASHER PIN
4 4 1 1 2 1 1 1 2 2
WASHER,2 1/16" x 2 15/16" - flat, 2-1/16 x 2-15/16 x 1/16 inch x .060" WASHER,1 13/16" x 2 1/2" - flat, 1-13/16 x 2-1/2 x 1/8 inch x .109" SNAP RING,#175, Ext Ring, Snap, , Pin #175, Ext