Professional Documents
Culture Documents
VCA03 FH2 CE Fire Hydrant
VCA03 FH2 CE Fire Hydrant
VCA03 FH2 CE Fire Hydrant
v3
FH2-CE Underground Fire Hydrant to BS 750:2012 Type 2 and BS EN 14339 Certicate No. KM 31556 CE Marked in accordance with Construction Products Directive; Certicate No. 0086-CPD-551050 Main features
Kitemarked to BS750:2012 and BS EN 14339 Robust design with minimal maintenance requirements safety factor of 2.6 Automatic frost valve - no water escape during operation Secure bolted bonnet to enable easy maintenance Low weight compact design for ease of handling and installation Universal inlet ange Ductile iron construction All non-metallic parts WRAS approved Stainless steel bolts (standard) 2 London round thread stainless steel outlet (standard) to BS 750:2012
Options
PN16 (standard) or PN25 Fixed stopper (black outlet cap) Loose stopper (white outlet cap) Bayonet outlet (UK or Dublin versions) N.I. Belfast outlet
Technical information
Clockwise close Weight 11.4 kg Maximum operating temperature 60C MOT 105 Nm MST 210 Nm Kv>92m/hour Drainage system time to drain 5 minutes Volume retained water 6ml Number of turns - to start ow 1 - fully open 8
Hydrant for potable water systems BS EN 1074-6 2004 Fully compliant to BS EN 14339, BS EN 1074-6 & BS750:2012 Resistance to disinfection BS EN 1074-6 Blue fusion bonded epoxy coating 250 microns to BS EN 14901 & DIN 30677 Inlet ange suitable for connections to BS EN 1092-2 & PN10/16 & BS 10 3 table D & E Stem seals & stem cap BS 750:2012
PAMVCA03.v3 SGPL 116882_FH2-CE Fire Hydrant Data Sheet_3 V6a PA REPRO:116882 14/8/09 10:15 Page 2
Technical Features
Technical information
G G G
Fully compliant to BS EN 14339, BS EN 1074-6 and BS 750 Maximum operating temperature 60C Inlet flange suitable for connections to BS EN 1092-2, PN10/16 and BS 10 3" table D and E Blue fusion bonded epoxy coating to EN 14901 Weight 15.5kg Clockwise close Stem seals and stem cap to BS 750:2006 Drainage system time to drain 3.5 minutes MOT 105 Nm MST 210 Nm Kv >92m3/hour Number of turns - to start flow <0.5 - fully open 8
2 2 12 12 23 23 17 17 19 19 20 20
25 25
9 9
24 24
26 26
3 3
4 4 13 13 13 13 16 16 15 15 8 8
G G G G G G G G G
18 18 23 23 6 6 5 5
14 14
21 21
22
22
7 7
11 11
Materials
2 1 1 1
Material
Ductile iron GIS 500/7 Nylon Ductile iron GIS 500/7
Materials
14 16 18 17 15 8 8 1 1 1
Material
EPDM Stainless steel Stainless steel Copper alloy Copper alloy
Standard BS EN 681-1 BS EN 681-1 BS EN 681-1 BS EN 681-1 BS EN 681-1 ISO 4017 ISO 4017 ISO 4017 ISO 7089 ISO 4032 BS 12164 BS EN 10088 - 3 ISO 7089
4 5
1
1 1
Stainless steel
Materials 6 1
Ref 1 2 3 4 5 6 7* 8 9 10 11 12 13 14
12LIMITER 1
11 OPERATING 1 CAP
Ductile Iron GJS 500/7 9 HYDRANT BONNET 1 Outlet cover Ductile Iron GJS 500/7 Frost valve washer
8 HYDRANT BODY 1
7 Description 1
Stainless steel
Ref 20 16 22 18 24 17 23
19
13SCREW OUTLET 2
OUTLET COVER
Nylon
2115
Description 1
FROST WASHER DZ 1 VALVE EPDM Piston gasketEPDM AA - 7G EPDM O 1 RING 105X5 Hexagon O 2 RING 26X3 Screw O 1 RING 23X2,5 Sealing O 1 RING 75X5 Gasket
Ductile iron
EPDM IHRD Stainless steel washer EPDM IHRD Stainless steel head bolt EPDM IHRD
STAINLESS STEEL GRADE 1.4027 min 13%Cr Stem O ring EPDM HDPE "Ductile Iron GJS 500/7 / EPDM AA - 7G DZ" CW 614 N STAINLESS STEEL GRADE 1.4021 CW 614 N EPDM AA - 7G DZ Dupont Zytel 70G30 HSL NC010 B NYLON GRADE 1.4310
19 25 20
pin
Stainless steel
HEXAGON HEAD BOLT M8x35 HEXAGON HEAD BOLT M12x40 HEXAGON HEAD BOLT M12x45 WASHER A12 NUT M12 SEALING NUT GUIDE PIN WASHER A24
STAINLESS STEEL GRADE A2 - 70 STAINLESS STEEL GRADE A2 - 70 STAINLESS STEEL GRADE A2 - 70 STAINLESS STEEL GRADE A2 STAINLESS STEEL GRADE A2 CW 614 N STAINLESS STEEL GRADE 1.4057 STAINLESS STEEL GRADE A2
FIXED/LOOSE STOPPER SPINDLE NUT SPINDLE LIMITER WIPER RING FROST VALVE SPINDLE FROST VALVE WASHER FROST VALVE SPRING
"BS EN 1563 / BS EN 681-1" BS 12164 BS EN 10088 - 3 BS 12164 BS EN 681-1 WRAS LISTED BS 4320 EN 10270 - 3
21 22 23 24 25 26 27
Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Website: www.saint-gobain-pam.co.uk The information given in this leaflet is, to the best of our knowledge, correct at the time of going to press. However Saint-Gobain PAM UK are constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this leaflet. Please contact our Technical Sales Department for detailed advice. 2009 Saint-Gobain PAM UK
Cert. No.12908
2012 Saint-Gobain PAM UK