Professional Documents
Culture Documents
Setting Ip CCTV
Setting Ip CCTV
Siapkan PC atau Laptop dan kabel UTP (cross/straight),hub switch 3. Masukkan Kabel UTP ke port yang ad dikamera 4. Selanjutnya buka IE (internet Explorer) 5. Gunakan aplikasi IP scan/IP tool bawaan camera 6. Setelah didapat IP default kamera 7. Rubah IP default sesuai IP yang akan dipakai B. Setting Switch 1.Siapkan Power Supply untuk Switch (core, distribution dan Access ) 2. Siapkan PC atau Laptop dan kabel console (bawaan dari Switch) 3. Masukkan kabel console ke switch 4. selanjutnya di PC atau Laptop buka
Gambar 1.1
Gambar 1.2
II.
<H3C>System view [H3C] interface M-Ethernet0/0/0 [H3C-interface M-Ethernet0/0/0]ip address 192.168.0.1 255.255.255.0 [H3C-Interface M-Ethernet0/0/0]quit [H3C]
III.
Vlan
3.1. Membuat Vlan Mis. Vlan ID Name Tipe Port
: : : :
<H3C>System View [H3C]vlan 10 name Perangkat [H3C#]vlan 10 [H3C-Vlan10]interface ge-4/0/1 3.2. Menghapus Vlan
3.3.
10 192.168.1.1 / 24
3.4.
3.5.
IV.
MembuatPort Trunk
Mis. Port : ge-4/0/48
<H3C>System View [H3C]interface ge-4/0/48 [H3C-Gigabitethernet4/0/48]port mode trunk [H3C-Gigabitethernet4/0/48]port trunk allowed vlan all
V.
<H3C> system View [H3C]interface bridge-aggregation 1 [H3C-Bridge-Aggregation1] port access vlan 10 [H3C-Bridge-Aggregation1]quit [H3C]interface gigabitethernet 4/0/48 [H3C-Gigabitethernet4/0/48]port link-aggregation group 1 [H3C-Gigabitethernet4/0/48]port access vlan 10
Warning: This port is a member of the link aggregation group. If configuration of the whole group is required to be modified, please configure it under the aggregation interface view. Otherwise, this operation may interrupt network traffic.Continue?[Y/N]: y
[H3C-Gigabitethernet4/0/48]quit [H3C]interface gigabitethernet 4/0/47 [H3C-Gigabitethernet4/0/47]port link-aggregation group 1 [H3C-Gigabitethernet4/0/47]port Access vlan 10
Warning: This port is a member of the link aggregation group. If configuration of the whole
group is required to be modified, please configure it under the aggregation interface view. Otherwise, this operation may interrupt network traffic.Continue?[Y/N]: y
[H3C-Gigabitehternet4/0/47]quit [H3C]
VI.
C. Setting Server 1. Siapkan power supply untuk server 2. Install server dengan OS sesuai spek 3. Selanjutnya install aplikasi kamera CCTV sebagai master 4. Dan install managemant storage D. Setting Client 1. Siapkan power supply untuk client 2. Install client dengan OS sesuai spek 3. Selanjutnya install aplikasi kamera CCTV sebagai master E. Setting Storage 1. Menjalankan Command view atau web module(navigator module) 2. Menginisialisasi Storage system 3. Membuat LUN 4. Membuat disk group 5. Menambah Host ke storage