Professional Documents
Culture Documents
Material Safety Data Sheet: Classified As Non Hazardous According To The Worksafe Australia Criteria
Material Safety Data Sheet: Classified As Non Hazardous According To The Worksafe Australia Criteria
MSDS
Page 1
INGREDIENTS Glass Fibres Impregnated with Thermoplastic Resin Binders Synonyms listed under material in table below CAS Number not applicable A number of glass fibre materials are produced which have different binders depending on the anticipated end use of the product. The binder type and content for each product are listed in the table below.
PRODUCT CODE P 200 to 800 LN P 250 to 800 SA P 250 to 500 RA P 350 PE P 250 to 500 HP P 400 to 450 UF R 400 to 450 UF P 0.25 to 1.5 ASE P 500 PVB P 200 FW P 250 TO 800 AL P 350 HA 8 MATERIAL Surface tissue Surface tissue Moulding tissue Moulding tissue industrial Pipewrap Irrigation mat Irrigation mat reinforced Battery separator felts Black coated tissue Filament winding tissue Surface Tissue Printed Tissue BINDER TYPE Styrene Styrene/acrylic Acrylic Polyester Urea formaldehyde Urea formaldehyde Urea formaldehyde Acrylic Polyvinyl alcohol Modified Acrylic Styrene/acrylic Acrylic BINDER CONTENT 8 to 10% 6 to 8% 6 to 8% 6 to 8% 15% 17% 17% 20% 14 to 16% 14% 6 to 8% 6 to 8%
MSDS
Page 2
MSDS
Page 3
MSDS
Page 4
Not required under normal conditions of use. If the exposure limit of the glass fibre or uncured resin is exceeded during manufacture, respiratory protection should be worn. Impervious gloves should be worn. A full face mask or goggles (safety glasses) to prevent dust entering the eyes is recommended. Goggles should be kept clean and the face washed regularly to prevent skin irritation. Full length clothing is recommended. Protective footwear should be worn. Wash hands thoroughly before eating, drinking or smoking. Remove contaminated clothing before entering eating areas.
FLAMMABILITY The product is non-combustible, but in a fire situation noxious fumes may be liberated at temperatures above 300C, fire fighters should wear self contained breathing apparatus if inhalation risk exists. STORAGE AND TRANSPORT Store in a dry place with adequate ventilation. No Dangerous Goods Class allocated. No HAZCHEM Code allocated Labelling and packaging should be in accordance with the relevant applicable regulations or in accordance with the manufacturers recommendations. SPILLS AND DISPOSAL All spills should be vacuumed up if possible and spilled material placed in suitably sealed and appropriately labelled containers. Clean-up personnel should wear impervious protective clothing and P1 respirators. Not listed as an environmental pollutant -The environmental consequences of this material are unknown, therefore it is recommended to contain spills and dispose of waste material according to EPA advice. FIRE/EXPLOSION HAZARD Hazards of Use/ Storage No hazards are anticipated during normal use.
MSDS
Issue date: APRIL 2003 MSDS Page 5 of 5
Page 5