Professional Documents
Culture Documents
TALAT Lecture 3804: Superplastic Alloys
TALAT Lecture 3804: Superplastic Alloys
Superplastic Alloys
5 pages, 5 figures
Basic Level
Objectives:
− to review briefly the commercially available superplastic aluminium alloys and to give
their processing and service properties
Prerequisites:
Process Strain
temp. rate
ϕ(s )
!
-1
T°C
TALAT 3804 2
Forming conditions
ε = 700 % ( ε = 10 s )
-3 -1
Max. elongations:
ε = 400 % ( ε = 10 s )
-1 -1
alu
Forming Conditions and Properties of AA 2004 SPF 3804.00.02
Training in Aluminium Application Technologies
alu
Forming Conditions and Properties of AA 5083 SPF 3804.00.03
Training in Aluminium Application Technologies
TALAT 3804 3
Forming Conditions and Properties
of AA 7475 SPF
ε = 450% (ε = 5 x 10 s )
-4 -1
Max. elongation:
alu
ε =600% (ε = 5 x 10 s )
-3 -1
Max. elongation:
!
ε =420% (ε = 10 s )
-2 -1
alu
TALAT 3804 4
List of Figures
3804.00.01 Alloys Suitable for Superplastic Forming and Typical Process Parameters
3804.00.02 Forming Conditions and Properties of AA 2004 SPF
3804.00.03 Forming Conditions and Properties of AA 5083 SPF
3804.00.04 Forming Conditions and Properties of AA 7475 SPF
3804.00.05 Forming Conditions and Properties of AA 8090 SPF
TALAT 3804 5