Professional Documents
Culture Documents
Data Bahan Baku
Data Bahan Baku
INDUSTRIAL FILTRATION WITH PIALITE PERLITE FILTER AIDS FILTRATION. The separation of solids from liquids is one of the most widely used operations in industrial processing. The wanted material may be either the liquid or the solids, depending on the finished product. This technical paper is concerned primarily with filtration where the liquid is the desired material and substantially 100% removal of impurities/unwanted solids is required. In many systems where the content is low, but the filtration resistance is high, this can be done most efficiently and economically only with the use of filter aids. In this process, the filter septum (cloth, screen, porous stone or metal) serves principally as a support for the cake. The filter aid forms a porous layer on the septum and thus the filter aid is the filtering medium that traps the solids being removed and prevents them from blinding the septum. A filter aid is a finely divided material which when added to the liquor/slurry to be filtered helps control flow and solids removal. It does not interfere chemically with the liquid being filtered, and is not readily compacted nor compressed by the exertion pressure. Filter aid filtration is mechanical, not a chemical action. It is straining on a micro scale. Irregular particles interlace and overlay in a fashion that leaves 85% to 90% voids or open spaces. These voids form billions of microscopically fine interstices between the filter aid particles. The size of these opening is so minute that unwanted solids (even in the submicron range) are strained from the liquid. The vast number of the openings compensates for their small size resulting in fast flow rates and brilliant clarity.
CHARACTERISTICS OF A GOOD FILTER AID Good filter aids are light in weight, chemically inert, and form high-porosity filter cakes to maintain free flow of the liquid. Specifically an efficient filter aid must: 1. Form a Very Porous Cake 2. Have Low Surface Area 3. Have Correct Particle Size 4. Deviate From Uniform Sizing 5. Be Available in a Number of Grades Form a Very Porous Cake. Structure of the particles must be such that they will not pack together closely, but will form cakes that are 85% to 90% pores. This not only permits high initial liquid flow but also provides pore spaces to trap and contain the filterable solids and leave a high percentage of channels remaining open for flow. Have Low Surface Area. Resistance to flow is created by the viscous shear of the liquid over the surface area of the filter aid particles. Therefore, the smaller the surface area, the higher the flow. Have Correct Particle Size Distribution. Because fine particles having higher surface area cut down flow, and
coarse particles give poor clarity, the narrowest possible range of particle sizes (within a given grade of a series of filter aids) is best. Deviate From Uniform Sizing. Particle size distribution must be tailored to include enough very coarse particles to permit precoating on coarse wire and synthetic screens. The percentage of coarse particles necessary for precoating is small and does not adversely affect flow rate or clarity. Available in a Number of Grades. Grade of filter aid must range from fine to coarse to suit various solids removal requirements. A great many materials have been tested as filter aids. Those made from diatomite, perlite, and cellulose have been most successful and are widely used in industrial filtration.
ANSAC dense soda ash ( sodium carbonate ( Na2CO3) is a premium quality product that combines a consistently high sodium carbonate content with very low impurity levels of chlorides and iron. ANSAC dense soda ash is guaranteed to be 99.2% pure, but has a typical purity level of 99.8% , resulting in more product when compared to a lower assay soda ash. jual bahan penjernih air, jual bahan baku industri kaca, jual abu soda, jual industri kulit, jual jual industri kaca, jual bahan kaca, jual bahan baku detergent dan sabun, jual bahan baku baking soda, jual bahan baku sodium chemicals including sodium phosphates, jual sodium sulfate, jual jual jual sodium sulfite, sodium acetate, jual sodium nitrite and jual sodium citrate,
Chemical Content
NaOH %
Typical
98.0 min
0.4 max 0.03 max 0.04 max 10 max 10 max Less than 10 ppb
- Kimia Indonesia - Asahimash - suplayer di jawa timur Na2Cr2O7 Industry technical standards for sodium dichromate Standards of implementation: GB/T16112003 Indicators project INDEX Excellent Grade Sodium dichromate(Na2Cr2 O72H2O) Sulfate(SO4) Chloride (Cl) 99.50 0.20 0.07 First Grade 98.30 0.30 0.10 Qualified Grade 98.00 0.40 0.20 Unit%
Notes: if you need the content of iron, please determine it in the way offered in the standard
Gansu Jinshi Chemical Industry Co.,LTD china
Min.Order Quantity:
Supply Ability:
Port:
Tianjin,china
BaCl2
Test item Appearance Assay [BaCl2] /% Clarify degrees test PH Water insoluble,/% N/% Sodium (Na) /% possii(K) /% Calcium (Ca) /% Iron (Fe)/% Strontium (Sr) /% Heavy metal/%
Specification Reagent grade Conform 99.5 Conform 5.0~7.0 0.01 0.002 0.01 0.005 0.05 0.0001 0.02 0.005
Pharmaceutical grade Conform 99.0 Conform 5.0-7.0 0.02 0.005 0.02 0.01 0.1 0.0002 0.1 0.001
Suplayer
H2O2
Item Purity 27.5%Grade 35%Grade 50%Grade 60%Grade 27.5% 35% 0.04 0.08 97 0.025 0.02 50% 0.04 0.08 97 0.035 0.025 60% 0.04 0.08 97 0.035 0.025
Free Acid as H2SO4 (m/m)% 0.04 Evaporation residue (m/m)% 0.08 Stability% 97
FOB Price:
10 Metric Ton/Metric Tons Get the latest price 3000 Metric Ton/Metric Tons per Month Tianjin