Professional Documents
Culture Documents
ROXY English France
ROXY English France
ROXY
1pc each Handset and Base 1pc AC power adaptor 1pc Telephone cord 2pcs rechargeable battery 1pc User Manual
OK
To select and confirm the selection, press MENU/OK. To rotate through the items, Press UP or DOWN. To go back to the previous screen, press CLEAR / ESC To check more information, press CLEAR / ESC repeatedly.
GETTING STARTED
installing your phone charge the battery
1 .Remove a battery cover. Press in on the notch and slide the cover down. 2 .Place the batteries in the correct polarity. 3 .Replace the battery cover and slide it up into place. 4 .Use the base AC adapter to connect the power jack on the base to a standard AC power outlet. If you have two or more handsets, connect each charger in the same way. 5 .Place a handset in the base with the display facing forward. For two or more handsets, place each handset in a charger. Charge all handsets completely (about 15 hours) before using them. -1-
*
In standby: press and hold for about 3 sec. to lock/unlock the keypad REDIAL In standby: open the redial list. MUTE During a call: mute the microphone on or off -2-
#
In standby: press and hold to turn the ringer on or off. While entering a phone number: press and hold to insert a 3-second pause. INTERCOM In standby: page another handset for a internal call. During a call: page another handset to transfer the call.
Select...
RING VOLUME EXT/RING INT/RING KEY BEEP RANGE TONE BATTERY TONE CHARGE TONE
To
open the list scroll through the list view the caller's information (in call log) dial the current number save it to the phonebook delete the current entry close the lists UP or DOWN.
Press...
UP() for call log or REDIAL for redial list. MENU/OK, then select VIEW . To check more information, press MENU/OK repeatedly. TALK/RECALL. MENU/OK, then select COPY TO PB. MENU/OK, then select DELETE (DELETE ALL to delete all entries). To confirm, press MENU/OK. CLEAR / ESC
To transfer a call
To page another handset
1 .During a call, press INTERCOM. Press the number key of the handset. (To cancel, press INTERCOM again.) 2.To complete the transfer, press END. To start a conference call, wait the paged handset answers, and press and hold INTERCOM.
To...
move the cursor left move the cursor right erase the character at the cursor erase the entire entry enter a blank space rotate through the punctuation and symbols
Press...
UP. DOWN. CLEAR / ESC and hold CLEAR / ESC
ringer volume ringer tone for external calls ringer tone for internal calls tone when you press a key tone when the handset is traveling out of range tone when the battery gets too low
1. 0 or 1.
To...
Select...
HANDSET NAME LANGUAGE AUTO ANSWER
To...
open the menu; with the phone in standby, rotate through the menu options select and confirm the option go back to the previous screen exit the menu
Press...
MENU/OK. UP or DOWN. MENU/OK. CLEAR / ESC END.
set this handset's name used on the display set this handset's display language answer a call when you pick up this handset from the cradle (without pressing any keys)
To use 'Call Waiting' If you get a Call Waiting call, the phone sounds a tone. To switch between the current and waiting call, press TALK/RECALL . To use the phonebook Each handset can store up to 20 entries in its phonebook. To create a new phonebook entry 1 .In standby, enter a phone number (up to 24 digits). 2 .Press MENU/OK . The phone prompts you to enter a name and edit the number, and select a special ringer tone for that entry. To make a call from the phonebook 1 .In standby, press DOWN( ) . Use UP and DOWN to find a entry. (To check the entry's information, press MENU/OK repeatedly.) 2 .Press TALK/RECALL to dial. To edit or delete phonebook entries
If you don't press any keys for 30 seconds, the handset exits the menu.
...
To use the alarm feature You can set an alarm on each handset. You need to set the date and time before using the alarm feature. When the time on the handset reaches the time on the setting, the handset sounds for 1 minute. (Other handsets and the base don't ring.) To stop the alarm tone, press any key on the handset. When an alarm is set, the alarm icon ( ) appears on the display. To set the alarm Open the menu. Select CLOCK & ALARM ALARM ONCE, DAILY, or OFF. To set the alarm tone Open the menu. Select CLOCK & ALARM ALARM TONE. If you want to change the base PIN (default 0000) Open the menu. Select ADVANCED SET CHANGE PIN. Enter the current PIN and press MENU/OK . Then enter the new PIN and press MENU/OK . If you want to add a new handset Register the handset. If you see 'UNREGISTERED' on the display, the handset is ready to register. 1 .On the base, press and hold FIND for about 5 seconds with the phone in standby. 2 .On the handset you want to register, open the menu. Select ADVANCED SET REGISTER. 3 .Enter the PIN (default 0000) and press MENU/OK . If you want to de-register the handset 1 .Open the menu. Select ADVANCED SET UNREGISTER. 2 .Enter the PIN (default 0000) and press MENU/OK . 3 .Find the handset you want to de-register and press MENU/OK . If you want to connect the phone to a PBX You may need to change the Recall Time setting. Open the menu. Select ADVANCED SET RECALL TIME SHORT, MEDIUM, or LONG. If you want to reset your phone to the factory default settings Open the menu. Select ADVANCED SET RESET. To confirm, press MENU/OK.
To set the clock Note: Only one handset at a time can change the clock.
1 .Open the menu. Select CLOCK & ALARM DATE/TIME. 2 .Enter the date and press MENU/OK . 3 .Enter the time. Change AM/PM using * or # (if the time format is '12 hours'). To confirm, press MENU/OK . To set the date and time format: Open the menu. Select CLOCK & ALARM SET FORMAT TIME FORMAT or DATE FORMAT. If you subscribe to Caller Line Identification (CLI), the phone automatically sets the date and time from the received CLI information. Open the menu. Select CLOCK & ALARM AUTO CLOCK ON.
EDIT ENTRY. Use UP/DOWN to find an entry, and press MENU/OK. DELETE. Use UP/DOWN to find an entry, and press MENU/OK. DELETE ALL. To confirm, press MENU/OK.
To use multi-handset features To use these features, you must have at least two handsets (see page 3). To make an internal call
Parties du combin
HAUT Pendant un appel: augmenter le volume. Dans tout menu ou liste: dplacer l'lment prcdent. En mode d'attente: ouvrir la note d'appel. En saisissant le texte: dplacer le curseur vers la gauche. MENU/OK En mode d'attente: Ouvrir le menu. Dans tout menu ou liste: slectionner et confirmer le choix. PAROLE/RAPPELER En mode d'attente: commencer un appel tlphonique (obtenir une tonalit de composition). Lorsque le tlphone sonne: rpondre un appel entrant. Pendant un appel: commuter un appel d'attente. EFFACER /ESC Dans un menu: retourner l'cran prcdent. En saisissant le texte: suppirmer une caractre. ( appuyez sur et maintenez pour supprimer toutes les caractres.)
ROXY
1pc chaque Combin et Base 1pc adapteur d'alimentation CA 1pc Corde tlphonique 2pcs pile rechargeable 1pc Manuel d'Utilisation
Si vous avez achet le numro Vous avez: de modle: ROXY ROXY-2 ROXY-3 Aucun 1 chacun 2 chacun
OK
Pour slectionner et confirmer le choix, appuyez sur MENU/OK. Pour tourner par les lments, appuyez sur HAUT ou BAS. Pour retourner l'cran prcdent, appuyez sur EFFACER / ESC Pour vrifier plus d'information, appuyez sur EFFACER / ESC de faon rpte.
Si tout lment est manqu ou endommag, n'utilisez jamais les produits abms!
En mode d'attente: appuyez sur et maintenez pendant 3 sec. environ pour serrer/desserrer le pav. RECOMPOSER En mode d'attente: ouvrir la liste de recomposition. MUET Pendant un appel: activer ou dsactiver le microphone muet.
#
En mode d'attente: appuyez sur et maintenez pour mettre la sonnerie en marche ou arrt. En saisissant le numro de tlphone: appuyez sur et maintenez pour insrer une pause de 3 sec..
INTERCOM En mode d'attente: paginer un autre combin pour un appel interne. Pendant un appel: paginer un autre combin pour transfrer l'appel.
Chargez tous les combins compltement (15 heures environ) avant d'utiliser.
-1-
Votre base supporte un total de 5 combins, y compris celui qui t fourni avec votre tlphone. Les combins tant emballs avec la base sont dj enregistrs. Votre tlphone est GAP compatible, en indiquant que vous pouvez enregistrer d'autres combins DECT GAP compatibles votre base, et vous pouvez enregistrer votre combin d'autres bases DECT GAP compatibles (La connexion GAP permet les fonctions minimales). Votre combin ne peut tre utilis qu'avec une base en tout moment. Pour enregistrer ou d-enregistrer le combin dans ce paquet, voyez page 7 .
-3-
-2-
Pour configurer les caractristiques ... de ce combin Slectionnez... volume de sonnerie tonalit de sonnerie pour les appels externes tonalit de sonnerie pour les appels internes tonalit lorsque vous appuyez sur une touche tonalit lorsque le combin se fonctionne hors de la gamme tonalit lorsque la pile devient trop faible tonalit lorsque vous mettez le combin sur le berceau Ouvrez le menu. Slectionnez CONFIGURATIONS HS
VOLUME DE SONNERIE EXT/SONNERIE INT/SONNERIE TONALIT DE TOUCHE TONALIT DE GAMME TONALIT DE PILE TONALIT DE CHARGE
Pour
ouvrir la liste faire dfiler la liste parcouvir l'information de correspondant (dans la note d'appel)
Appuyez sur
HAUTE( ) pour la note d'appel ou RECOMPOSER pour la liste de recomposition HAUT ou BAS. MENU/OK, puis slectionnez PARCOURIR . Pour vrifier plus d'information, appuyez sur MENU/OK de faon rpte.
Appuyez sur
HAUT. BAS. EFFACER / ESC et maintenez EFFACER / ESC 1. 0 ou 1
composer le numro actuel PAROLE/RAPPELER. sauvegarder l'annuaire MENU/OK, puis slectionnez COPIER AN . supprimer l'entre actuelle fermer les listes MENU/OK, puis slectionnez SUPPRIMER (TOUS SUPPRIMER pour supprimer toutes les entres). Pour confirmer, appuyez sur MENU/OK EFFACER / ESC
Slectionnez...
NOM DE COMBIN LANGUE AUTO RPONDRE
Si vous n'appuyez sur aucune touche pendant 30 secondes, le combin quitte le menu. Pour configurer l'horloge Note: Seulement un combin en mme temps peut changer l'horloge. 1 .Ouvrez le menu. Slectionnez HORLOGE & ALARME DATE/TEMPS. 2 .Saisissez la date et appuyez sur MENU/OK. 3 .Saisissez le temps. Changez AM/PM en utilisant ou # (si le format de temps est '12 heures'). Pour confirmer, appuyez sur MENU/OK. Pour configurer le format de date et temps: Ouvrez le menu. Slectionnez HORLOGE & ALARME CONFIGURER FORMAT FORMAT DE TEMPS ou FORMAT DE DATE. Pour configurer la sonnerie de combin et les tonalits Ouvrez le menu. Slectionnez CONFIGURATIONS HS TONALIT DE COMBIN ... -4-
Pour utiliser 'Attente d'Appel' Si vous recevez l'attente d'appel, le tlphone sonne une tonalit. Pour commuter entre l'appel actuel et l'appel d'attente, appuyez sur PAROLE/RAPPELER . Pour utiliser l'annuaire Chaque combin peut sauvegarder jusqu' 20 entres dans son annuaire. Pour crer une nouvelle entre d'annuaire 1 .En mode d'attente, saisissez un numro de tlphone (jusqu' 24 chiffres). 2 .Appuyez sur MENU/OK . Le tlphone vous demande de saisir un nom et d'diter le numro, puis de slectionner une tonalit de sonnerie spciale pour cette entre. To faire un appel partir de l'annuaire 1 .En mode d'attente, appuyez sur BAS( ) . Utilisez HAUT et BAS pour trouver une entre. (Pour vrifier l'information d'entre, appuyez sur MENU/OK de faon rpte.) 2 .Appuyez sur PAROLE/RAPPELER pour composer. Pour diter ou supprimer les entres d'annuaire Ouvrez le menu. Slectionnez ANNUAIRE ...
Pour utiliser les caractristiques d'alarme Vous pouvez configurer une alarme sur chaque combin. Vous devez configurer la date et le temps avant d'utiliser les caractristiques d'alarme. Lorsque le temps sur le combin atteint le temps sur les configurations, le combin sonne pendant 1 minute. (D'autres combins et la base ne sonnent pas.) Pour arrter la tonalit d'alarme, appuyez sur toute touche sur le combin. Aprs avoir configur une alarme, l'icne d'alarme ( ) montre sur l'cran. Pour configurer l'alarme Ouvrez le menu. Slectionnez HORLOGE & ALARME ALARME UNE FOIS, QUOTIDIEN, ou OFF. Pour configurer la tonalit d'alarme Ouvrez le menu. Slectionnez HORLOGE & ALARME TONALIT D'ALARME. Si vous voulez changer le PIN de base (par dfaut 0000) Ouvrez le menu. Slectionnez CONFIGURATION AVANCE CHANGER PIN. Saisissez le PIN actuel et appuyez sur MENU/OK . Puis saisissez le nouveau PIN et appuyez sur MENU/OK . Si vous voulez ajouter un nouveau combin Register the handset. If you see 'NON INSCRIT' sur l'cran, le combin est prt enregistrer. 1 .Sur la base, appuyez sur et maintenez TROUVER pendant 5 secondes environ avec le tlphone en mode d'attente. 2 .Sur le combin que vous voulez enregistrer, ouvrez le menu. Slectionnez CONFIGURATION AVANCE ENREGISTRER. 3 .Saisissez le PIN (par dfaut 0000) et appuyez sur MENU/OK . Si vous voulez d-enregistrer le combin 1 .Ouvrez le menu. Slectionnez CONFIGURATION AVANCE DENREGISTRER. 2 .Saisissez le PIN (par dfaut 0000) et appuyez sur MENU/OK . 3 .Trouvez le combin que vous voulez d-enregistrer et appuyez sur MENU/OK . Si vous voulez connecter le tlphone un PBX Vous devez changer les configurations de Temps de Rappel. Ouvrez le menu. Slectionnez CONFIGURATION AVANCE TEMPS DE RAPPEL COURT, MDIUM, ou LONG. Si vous voulez remettre votre tlphone aux configurations d'usine par dfaut Ouvrez le menu. Slectionnez CONFIGURATION AVANCE RECONFIGURER. Pour confirmer, appuyez sur MENU/OK .
Pour
diter une entre supprimer une entre supprimer toutes les entres
Slectionnez...
DITER ENTRE. Utilisez HAUT/BAS pour trouver une entre, et appuyez sur MENU/OK. SUPPRIMER. Utilisez HAUT/BAS pour trouver une entre, et appuyez sur MENU/OK. TOUS SUPPRIMER. Pour confirmer, appuyez sur MENU/OK.
Pour mettre le combin en arrt, appuyez sur et maintenez Terminer jusqu' ce que l'affichage est dsactiv. Pour mettre le combin en marche, appuyez sur et maintenez TERMINER usqu' ce que l'affichage est activ. -5-
Pour utiliser les caractristiques de multi-combin Pour utiliser ces caractristiques, vous devez possder au moins deux combins (voir page 3). Pour faire un appel interne
-6-
-7-