Professional Documents
Culture Documents
MS-16GB Disassembly Guide
MS-16GB Disassembly Guide
1BATTERY PACK
2BOTTOMDOOR ASSY
3HDD MODULE
4THERMAL-KITCPUDRAMANDWIRELESS
5ODD MODULE
6SEPARATE UPPER CASE ANDLOWER CASE
7LOWER CASE ASSY
8UPPER CASE ASSY
9LCD MODULE ASSY
CX61/CR61 (MS-16GB)Di sassembly Gui de
1BATTERY PACK
1.1Move the Unlock button base on left picture
shows.
1.2Release the Release button and move the
battery packbase onleft picture.
Component P/N Qty
BatteryPack S9N-2262210-M47 1
CX61/CR61 (MS-16GB)Di sassembly Gui de
2BOTTOM DOOR ASSY
2.1 Remove the 5 screws (M2.5*5mm). Then remove
the Bottomdoor.
Attention: the screwdriver touque is: 2.0-2.5gf-cm
Component P/N Qty
Bottomdoor 307-6G1J 214-P89 1
Screw E43-1255001-G68 6
CX61/CR61 (MS-16GB)Di sassembly Gui de
3HDD MODULE
3.1: Remove the 2 screws (M2.5*5mm); then
remove the HDD Module according to the direction
as pic shows.
Attention: the screwdriver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1255001-G68 2
3.2: Remove the 2 screws (M3*3.5mm) that
stabilize the HDD bracket, then remove the HDD
bracket.
Attention: the screwdriver torque is 3.0-3.5Kgf-cm
Component P/N Qty
Screw E43-1303502-H29 2
HDDBracket 307-6G10111-A89 1
HDDModule S71-2450540-W36 1
CX61/CR61 (MS-16GB)Di sassembly Gui de
4THERMAL-KITCPU DRAM AND WIRELESS
4.1: Remove the 3screws(M2.5*4mm) andFAN
cable, after that remove the Fan.
Attentionthe screwdriver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1254001-G68 3
FAN E33-0800221-MC2 1
4.2: Remove the 6 screws (M2.5*4mm), after that
remove the Heatsink.
Attentionthe screwdriver torque is 2.0-2.2Kgf-cm
Component P/N Qty
Screw E43-1254001-G68 7
Heatsink E31-0803490-CA9 1
4.3Openthe CPU Slot withScrewDriver, then
remove CPU Module as below.
Component P/N Qty
CPU OA3-16F3009 1
1
3
2
1
2
5
4
6
3
CX61/CR61 (MS-16GB)Di sassembly Gui de
4THERMAL-KITCPU DRAM AND WIRELESS
4.4Pushthe two side shieldingof RAM as pic
shows; Then remove the RAM module according
the directionas pic shows.
Component P/N Qty
RAMModule S7C-S459H04-E54 1
4.5Remove 1screw(M2*3mm); thenremove the
two side wireless cardantenna as pic shows.
Attention: the screwdriver torque is: 1.5-2.0Kgf-cm
Component P/N Qty
WLANModule OS5-1762002 1
Screw E43-1203003-H29 1
CX61/CR61 (MS-16GB)Di sassembly Gui de
5ODD MODULE
5.1Remove the ODD Module according to the
directionas pic shows.
5.2Remove ODDBezel as below.
Component P/N Qty
ODDBezel E2P-6G1F221-P89 1
5.3Remove 2pcs (M2*3mm) Screws; Thenremove
ODDBracket as below.
Attentionthe screwdriver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203003-H29 2
ODDBracket E2M-6G10711-A89 1
ODDModule S7D-2270076-T87 1
CX61/CR61 (MS-16GB)Di sassembly Gui de
6SEPARATE UPPER CASE AND LOWER CASE
6.1Remove the Keyboard. firstly fromupside,
then left side to right side, last remove downside.
.