Keith Triche MSW Process Advisor Robert Hulett Management Sponsor
2012 Chevron U.S.A. Inc.
To improve our workforce safety performance, GOM is targeting 4 Focus Areas: 2 Managing Safe Work (MSW) Procedure #5: Hazard Identification It is Chevrons expectation that all of our employees and contractors will utilize the Hazard Identification Tool when identifying hazards associated with work to be completed. Persons Leading Work (PLW) Contractor Health, Environment Safety Management (CHESM) Accountability 2012 Chevron U.S.A. Inc. 3 Hazard Identification-Chevrons Expectations It is Chevrons expectation that all of our employees and contractors will utilize the Hazard Identification Tool when identifying hazards associated with work to be completed. This tool should be used anytime from the initial planning phase, to the Permitting Phase during the work groups pre-job onsite Job Safety Analysis (JSA), to the Implementing Phase with the individuals ongoing effort to Think Incident Free (TIF). The Hazard Identification Tool is critical to identifying potential hazards and enables the development of actions and strategies to prevent incidents from occurring.
2012 Chevron U.S.A. Inc.
4 Hazard Identification To prevent incidents, workers must recognize and effectively identify the hazards associated with the tasks they perform. By focusing on the principles of hazard recognition we are not asking workers to memorize a list of thousands of possible hazards, but rather to understand broad categories of hazards. 2012 Chevron U.S.A. Inc. 5 A condition or action that has the potential for an unplanned release of, or unwanted contact with an energy source that may result in harm or injury to people, property or the environment. What is a Hazard? 2012 Chevron U.S.A. Inc. 6 Hazard Identification Tool This tool was developed to help us identify workplace hazards. The tool utilizes an energy source model to key users to the potential hazards present in the workplace. Each energy source should be evaluated for its presence and the potential for related hazards. Once the hazards are identified, they should be mitigated to prevent an incident from occurring. We will now work through each of the energy sources along with some examples.
2012 Chevron U.S.A. Inc.
7
Energy Sources Gravity Motion Mechanical Electrical Pressure Temperature Chemical Biological Radiation Sound 2012 Chevron U.S.A. Inc.
8 The force caused by the attraction of all other masses to the mass of the earth.
Examples: a falling object, a collapsing roof, a body tripping or falling Gravity 2012 Chevron U.S.A. Inc. 9 The change in position of objects or substances.
Examples: vehicle, vessel or equipment movement, flowing water, wind, body positioning: lifting, straining, or bending Motion 2012 Chevron U.S.A. Inc. 10 Mechanical Energy The energy of the components of a mechanical system, i.e. rotation, vibration, motion, etc. within otherwise stationary piece of equipment/machinery.
Examples: rotating equipment, compressed springs, drive belts, conveyors, motors 2012 Chevron U.S.A. Inc. 11 The presence and flow of an electric charge.
Examples: power line, transformers, static charge, lightning, energized equipment, wiring, batteries Electrical 2012 Chevron U.S.A. Inc. 12 Pressure Energy applied by a liquid or gas which has been compressed or is under a vacuum.
Examples: pressure piping, compressed gas cylinders, control lines, vessels, tanks, hoses, pneumatic and hydraulic equipment 2012 Chevron U.S.A. Inc.
13 Temperature The measurement of differences in the thermal energy of objects or the environment, which the human body senses as either heat or cold.
Examples: open flame and ignition sources, hot or cold surface, liquids or gases, hot work, friction, general environmental conditions, steam, extreme and changing weather conditions 2012 Chevron U.S.A. Inc.
14 Chemical Energy The energy present in chemicals that inherently, or through reaction, has the potential to create a physical or health hazards to people, equipment, or the environment.
Examples: flammable vapors, reactive hazards, carcinogens or other toxic compounds, corrosives, pyrophorics, combustibles, inert gas, welding fumes, dusts 2012 Chevron U.S.A. Inc. 15 Living organisms that can present a hazard.
Examples: animals, bacteria, viruses, insects, blood-borne pathogens, improperly handled food, contaminated water Biological Energy 2012 Chevron U.S.A. Inc. 16 Radiation The energy emitted from radioactive elements, or sources, and naturally occurring radioactive materials.
Examples: lighting issues, welding arc, X- rays, solar rays, microwaves, naturally occurring radioactive material (NORM) scale, or other non- ionizing sources 2012 Chevron U.S.A. Inc. 17 Sound Energy Sound is produced when a force causes an object or substance to vibratethe energy is transferred through the substance in waves.
Energy Sources Gravity Motion Mechanical Electrical Pressure Temperature Chemical Biological Radiation Sound 2012 Chevron U.S.A. Inc.
19 Hazard Barriers and Interaction of Energy Sources Barriers Remove energy source Prevent release Protect from release Interactions Chemical & Gravity Temperature and Chemical Sound and Motion
2012 Chevron U.S.A. Inc. 20 HazId Links? Hazard Identification is critical to many other OE processes such as; BBS JSA PTW SWA Simultaneous Operations Hazard Communication Personal Protective Equipment Hearing Conservation Occupational Hygiene Safe Work Practices Crane Program 2012 Chevron U.S.A. Inc.
21 Hazard Identification Quiz 2012 Chevron U.S.A. Inc. 22 Question 1 It is Chevrons expectation that all of our employees and contractors will utilize the Hazard Identification Tool when identifying hazards associated with work to be completed. True/False
2012 Chevron U.S.A. Inc. 23 Question 1 It is Chevrons expectation that all of our employees and contractors will utilize the Hazard Identification Tool when identifying hazards associated with work to be completed.
True 2012 Chevron U.S.A. Inc. 24 Question 2 This tool should be used during a) the initial planning phase, b) the Permitting Phase during the work groups pre- job onsite Job Safety Analysis (JSA), c) the Implementing Phase with the individuals ongoing effort to Think Incident Free (TIF). d) All of the above
2012 Chevron U.S.A. Inc.
25 Question 2 This tool should be used during a) the initial planning phase, b) the Permitting Phase during the work groups pre- job onsite Job Safety Analysis (JSA), c) the Implementing Phase with the individuals ongoing effort to Think Incident Free (TIF). d) All of the above
New 2012 Chevron U.S.A. Inc. 26 Question 3 A condition or action that has the potential for an unplanned release of, or unwanted contact with an energy source that may result in harm or injury to people, property or the environment is called a hazard.
True/False
2012 Chevron U.S.A. Inc. 27 Question 3 A condition or action that has the potential for an unplanned release of, or unwanted contact with an energy source that may result in harm or injury to people, property or the environment is called a hazard.
True
2012 Chevron U.S.A. Inc. 28 Question 4 Which of the following OE Processes are linked to Hazard Identification? a. JSA b. BBS c. PTW d. SWA e. All of the above-correct answer 2012 Chevron U.S.A. Inc. 29 Question 4 Which of the following OE Processes are linked to Hazard Identification? a. JSA b. BBS c. PTW d. SWA e. All of the above-correct answer 2012 Chevron U.S.A. Inc. 30 Question 5
What are the energy sources pictured here? a. Sound and Temperature b. Radiation and Pressure c. Electrical and Sound d. Gravity and Pressure e. Pressure and Chemical f. Biological and Temperature 2012 Chevron U.S.A. Inc. 31 Question 5
What are the energy sources pictured here? a. Sound and Temperature b. Radiation and Pressure c. Electrical and Sound d. Gravity and Pressure e. Pressure and Chemical f. Biological and Temperature 2012 Chevron U.S.A. Inc. 32 Question 6 What are the energy sources pictured here? a. Temperature and Gravity b. Chemical and Sound c. Temperature and Biological d. Radiation and Motion
2012 Chevron U.S.A. Inc.
33 Question 6 What are the energy sources pictured here? a. Temperature and Gravity b. Chemical and Sound c. Temperature and Biological d. Radiation and Motion
2012 Chevron U.S.A. Inc.
34 Question 7 What are the energy sources pictured here? a. Gravity and Temperature b. Radiation and Temperature c. Mechanical and Biological d. Gravity and Pressure 2012 Chevron U.S.A. Inc. 35 Question 7 What are the energy sources pictured here? a. Gravity and Temperature b. Radiation and Temperature c. Mechanical and Biological d. Gravity and Pressure 2012 Chevron U.S.A. Inc. 36 Question 8 What are the energy sources pictured here?
a. Sound and Pressure b. Radiation and Temperature c. Electrical and Sound d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc. 37 Question 8 What are the energy sources pictured here?
a. Sound and Pressure b. Radiation and Temperature c. Electrical and Sound d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc. 38 Question 9 What are the energy sources pictured here?
a. Sound and Temperature b. Radiation and Pressure c. Motion and Mechanical d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc. 39 Question 9 What are the energy sources pictured here?
a. Sound and Temperature b. Radiation and Pressure c. Motion and Mechanical d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc. 40 Question 10
What are the energy sources pictured here?
a. Sound and Temperature b. Radiation and Pressure c. Sound and Electrical d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc. 41 Question 10
What are the energy sources pictured here?
a. Sound and Temperature b. Radiation and Pressure c. Sound and Electrical d. Gravity and Pressure e. Pressure and Biological 2012 Chevron U.S.A. Inc.
42 Question 11 What are some of the barriers we can use to eliminate hazards?
a. Remove energy source, Prevent release, and Protect from release b. Watch carefully and make appropriate notifications c. Be vocal and lend a helping hand d. All of the above 2012 Chevron U.S.A. Inc. 43 Question 11 What are some of the barriers we can use to eliminate hazards?
a. Remove energy source, Prevent release, and Protect from release b. Watch carefully and make appropriate notifications c. Be vocal and lend a helping hand d. All of the above 2012 Chevron U.S.A. Inc. 44 Question 12
Heat/Cold- Sparks and fire Heat/Cold- Heat Gravity- Falling metal Pressure- Propane and oxygen hoses Chemical- Smoke and fumes Electrical- Electrical line Chemical- Propane and oxygen ? Radiation- Intense light Gravity- Support Biological - Person / mask What are the energy sources pictured here?
a) Gravity, Motion, Mechanical, Sound and Temperature b) Motion, Mechanical, Biological, Radiation, Sound and Pressure c) Gravity, Motion, Electrical, Temperature, Chemical and Sound d) Gravity, Radiation, Temperature, Chemical, Biological and Pressure e) Motion, Mechanical, Electrical, Sound, Pressure and Biological f) All of the energy sources are visible in this picture 2012 Chevron U.S.A. Inc. 45 Question 12
Heat/Cold- Sparks and fire Heat/Cold- Heat Gravity- Falling metal Pressure- Propane and oxygen hoses Chemical- Smoke and fumes Electrical- Electrical line Chemical- Propane and oxygen ? Radiation- Intense light Gravity- Support Biological - Person / mask What are the energy sources pictured here?
a) Gravity, Motion, Mechanical, Sound and Temperature b) Motion, Mechanical, Biological, Radiation, Sound and Pressure c) Gravity, Motion, Electrical, Temperature, Chemical and Sound d) Gravity, Radiation, Temperature, Chemical, Biological and Pressure e) Motion, Mechanical, Electrical, Sound, Pressure and Biological f) All of the energy sources are visible in this picture 2012 Chevron U.S.A. Inc.