This document provides information on mounting, model codes, and specifications for Denison Hydraulics proportional pressure relief valves. The valves come in three sizes, and can be mounted in different ways depending on their function. Their model codes convey information on size, pressure rating, ports, pressure setting range, control type, and whether they include features like a vent valve or electric proportional pressure control. Mounting and model codes are specified for proper selection of the valve for its intended use and conditions.
This document provides information on mounting, model codes, and specifications for Denison Hydraulics proportional pressure relief valves. The valves come in three sizes, and can be mounted in different ways depending on their function. Their model codes convey information on size, pressure rating, ports, pressure setting range, control type, and whether they include features like a vent valve or electric proportional pressure control. Mounting and model codes are specified for proper selection of the valve for its intended use and conditions.
This document provides information on mounting, model codes, and specifications for Denison Hydraulics proportional pressure relief valves. The valves come in three sizes, and can be mounted in different ways depending on their function. Their model codes convey information on size, pressure rating, ports, pressure setting range, control type, and whether they include features like a vent valve or electric proportional pressure control. Mounting and model codes are specified for proper selection of the valve for its intended use and conditions.
This document provides information on mounting, model codes, and specifications for Denison Hydraulics proportional pressure relief valves. The valves come in three sizes, and can be mounted in different ways depending on their function. Their model codes convey information on size, pressure rating, ports, pressure setting range, control type, and whether they include features like a vent valve or electric proportional pressure control. Mounting and model codes are specified for proper selection of the valve for its intended use and conditions.
DENISON HYDRAULICS Pressure Relief Valve R4V Proportional Pressure Relief Valve R4V. . . P2 S E R V I C E I N F O R M A T I O N 2 R4V03 1 ) Mounted dependent on function. Je nach Funktion montiert. Monte suivant la fonction. Montaggio conforme alla funzione. Se monta dependiendo de la funcion. S E R V I C E I N F O R M A T I O N 3 R4V06 1 ) Mounted dependent on function. Je nach Funktion montiert. Monte suivant la fonction. Montaggio conforme alla funzione. Se monta dependiendo de la funcion. S E R V I C E I N F O R M A T I O N 4 R4V10 1 ) Mounted dependent on function. Je nach Funktion montiert. Monte suivant la fonction. Montaggio conforme alla funzione. Se monta dependiendo de la funcion. S E R V I C E I N F O R M A T I O N 5 S E R V I C E I N F O R M A T I O N 6 S E R V I C E I N F O R M A T I O N 7 MODEL CODE 8 omit for version without VV01 & without P2 Model Number: R4V .. . . . . . .. ... A 1 Series R4V = Pressure Relief Valve Size 03 = 3 8HH 06 = 3 4HH, 1HH 10 = 1 1 4HH Max. pressure 0 = for cartridges only 5 = for body valves only k 350 bar Body mounting Cartridge with pilot valve: 0 = without Y1 port G = Y1 port = G 1 4HH E = Y1 port = SAE-4 ( 7 16HH20 UNF) Subplate mounting: 3 = without Y1 port 9 = Y1 port = G 1 4HH 7 = Y1 port = SAE-4 ( 7 16HH20 UNF) Threaded body: 6 = R4V03 = G 1 2HH T-body = R4V06 = G1HH T-body D = R4V06 = G 3 4HH L-body = R4V10 = G1 1 4HH L-body k X, Y1 ports 1) = G 1 4HH 4 = R4V03 = SAE-8 T-body = R4V06 = SAE-16 T-body B = R4V06 = SAE-12 L-body = R4V10 = SAE-20 L-body k X, Y1 ports 1) = SAE-4 ( 7 16HH20 UNF) 1) Port Y1 is only available at Drain line (code 2) external from the pilot head Pressure setting range 1 = 7...105 bar 3 = 7...210 bar 5 = 7...350 bar Type of control 1 = Hand knob 32 mm dia. 2 = Hand knob 50 mm dia. (not for version with vent valve VV01 or P2) 3 = Acorn nut with lead seal 4 = Adjusting device with key lock, key order no. 70070619 Drain line 0 = internal (not for cartridges) 1 = external from the subplate or manifold (Y). 2 = external from the pilot head (Y1); (not for Body Mounting codes 0 or 3) 3-way vent valve VV01 09 = with manual override Solenoid de-energized: open to tank 10 = without manual override k Solenoid energized: vent line blocked 11 = with manual override Solenoid de-energized: vent line blocked 12 = without manual override k Solenoid energized: open to tank P2 = Electric proportional pressure control (12 V DC only) (not with internal drain code 0) Solenoid voltage and current W01 = 115 V / 60 Hz 1 ) G0R = 12 V W02 = 230 V / 60 Hz G0Q = 24 V DC W06 = 115 V / 50 Hz AC G0H = 48 V W07 = 230 V / 50 Hz 1 ) R4V with P2 = P2G0R only k k Design letter Seal class 1 = Standard (for special fluids consult DENISON) Modifications Please Note: R4V03 Pilot heads are not interchangeability with R4V06 respectively R4V10 pilot heads.