Professional Documents
Culture Documents
CV-X200 X100 Digest C 611843 GB 1034-1
CV-X200 X100 Digest C 611843 GB 1034-1
CV-X200 X100 Digest C 611843 GB 1034-1
High-Speed, Multi-Camera
Machine Vision System
CV-X200/X100 Series
GLOBAL STANDARD
CV-X200/X100 Series
Ver.3
DIGEST VERSION
XV-1000 Series
CV-3000 Series
TH E FI RST I M AGE
PRO CESSIN G SENSO R
VX Series
CV-2000 Series
CV-5000 Series
CV-500/700 Series
CV-100/300 Series
FI RS T P H A S E
1980s to 2002
2003 to 2007
algorithms.
processing sensor.
2
S E CO N D P H A S E
Performance
Highest problem solving capability
through flexibility.
XG-8000/7000 Series
Usability
Stable, long-term operation with an
intuitive, user-friendly interface.
CV-X200/X100 Series
Cost
Presence detection
at a reasonable cost.
IV Series
THIRD PHASE
discrimination.
For high-performance image processing, ease of initial set-up, stable operation, and
low-maintenance performance are essential.
Based on KEYENCEs expertise accumulated over many years, the CV-X has
converted these important factors into functions easily handled by any user.
Version 3 offers even higher problem-solving performance with the addition of a
21 mega-pixel camera, a high-speed, high-capacity controller, and 3D laser-profile
measurement support.
All of these functions are now possible with the same ease-of-use.
In order to provide a wide variety of choices suited for every challenge and to ensure
stable operation at every production site, the CV-X Series will continue to evolve.
CV-X200/X100 Series
Ver.3
H A R D W A R E
P.8
16 types of cameras available
to match any application
NEW
16
MULTI-CORE DSP-INTEGRATED
CV-X200 Series
ULTRA HIGH-RESOLUTION
21M PIXEL CAMERA
NEW
CONNECTION-COMPLIANT
LJ-V
P.12
T O O L S
Dimension inspection
Character recognition
3D measurement
U T I L I T I E S
P. 24
adjustments.
Operation screen catalog
manuals automatically.
Camera installation replication
NEW
21M pixel
camera
5M pixel camera
Laser profile
measurement system
16
Model
CA-H2100M
CA-H2100C
CV-H500M
CV-H500C
CV-H200M
CV-H200C
CV-200M
CV-200C
CV-S200M
CV-S200C
CV-H035M
CV-H035C
CV-035M
CV-035C
CV-S035M
CV-S035C
LJ-V Series
Specs
16 speed monochrome
16 speed color
11 speed monochrome
11 speed color
7 speed monochrome
7 speed color
Monochrome
Color
Compact monochrome
Compact color
7 speed monochrome
7 speed color
Monochrome
Color
Compact monochrome
Compact color
Head: 7 types
Capture
range
Transfer
time
109.9 ms
61.2 ms
29.2 ms
58.5 ms
58.5 ms
F-mount size
XG Series
Minimum
installation
distance
C-mount size
16.0 ms
16.0 ms
64000 profiles/sec
NEW
4.7 ms
EXAMPLE
Comparison of the WD
required for a field of view of
100 mm 3.94"
High-Speed, Multi-Camera
Machine Vision System
CV-X200 Series
LJ-V Series
WORLDS FASTEST!
The LJ-V Series has realized the fastest sampling speed in the world for 2D laser measuring instruments.* This makes it possible to
measure, in high-definition, the profiles of products on manufacturing lines being fed past the laser at extremely high speed without
missing a single one. For example, the LJ-V Series can measure targets moving at 6.4 m 21.0'/s with a 0.1 mm 0.004" pitch. The LJ-V
Series does not miss a single abnormal or defective part.
* According to KEYENCEs investigation (as of June 2013)
ULTRA
HIGH-ACCURACY
ULTRA HIGH-ACCURACY
SPECULAR REFLECTION
HIGH-ACCURACY
HIGH-ACCURACY
SPECULAR REFLECTION
MID-RANGE
LONG-RANGE
ULTRA LONG-RANGE
LJ-V7020
LJ-V7020K
LJ-V7060
LJ-V7060K
LJ-V7080
LJ-V7200
LJ-V7300
(mm)
(inch)
(mm)
(inch)
Measurement
range
450
17.72"
400
15.75"
400
15.75"
Measurement
range
20048 mm
(7.87" 1.89")
350
13.78"
350
13.78"
155 mm
6.10"
300
11.81"
250
9.84"
Measurement
range
Measurement
range
24.22.3 mm
(0.95" 0.09")
202.6 mm
(0.79" 0.10")
150
5.91"
608 mm
(2.36" 0.31")
250
9.84"
8023 mm
(3.15" 0.91")
54.67.6 mm
(2.15" 0.30")
200
7.87"
300 mm
11.81"
152 mm
5.98"
100
3.94"
50
1.97"
Repeatability
Measurement
range
17.4 mm
0.69"
20 mm
0.79"
22.6 mm
0.89"
6.5 mm
0.26"
Width: 7 mm
0.28"
Width: 7.5 mm
0.30"
Width:
2 1 .9 mm
0.86"
24.2 mm
0.95"
26.5 mm
1.04"
Width: 6.5 mm
0.26"
Width: 7 mm
0.28"
Width: 7.5 mm
0.30"
52 mm
2.05"
60 mm
2.36"
68 mm
2.68"
Width: 13.5 mm
0.53"
Width: 15 mm
0.59"
Width: 15 mm
0.59"
47 mm
1.85"
54.6 mm
2.15"
62.2 mm
2.45"
Measurement
range
Measurement
range
Measurement
range
200
7.87"
450
17.72"
300145 mm
(11.81" 5.71")
57 mm
2.24"
Width: 8 mm
0.31"
Width: 14 mm
0.55"
Width: 8 mm
0.31"
80 mm
3.15"
103 mm
4.06"
Width: 25 mm
0.98"
200 mm
7.87"
Width: 32 mm
1.26"
Width: 39 mm
1.54"
Width: 180 mm
7.09"
150
5.91"
100
3.94"
Width: 51mm
2.01"
50
1.97"
Width: 62mm
2.44"
248 mm
9.76"
Width: 73mm
2.87"
445 mm
17.52"
Width: 240 mm
9.45"
Z-axis 202.6 mm 0.79" 0.10" Z-axis 24.22.3 mm 0.95" 0.09" Z-axis 608 mm 2.36" 0.31"
X-axis 7 mm 0.28"
X-axis 7 mm 0.28"
X-axis 15 mm 0.59"
X-axis 14 mm 0.55"
X-axis 32 mm 1.26"
X-axis 62 mm 2.44"
A total of 16 types of cameras can be mixed for use. For example, it is possible to attach a monochrome camera
and a color camera to 1 controller unit. Also, by connecting a camera expansion unit, it is possible to connect up
to two 21M pixel cameras, four 5M pixel or lower cameras*, 4 laser heads, or 2 laser head plus 2 area cameras.
Because simultaneous image acquisition and simultaneous processing can be performed for all camera
combinations, this system has the flexibility to support future additions and changes to inspection specifications.
MULTI-CAMERA SYSTEM
Connect up to 4 cameras from a selection of 16 cameras
Controller
Camera
expansion unit
Illumination
Expansion Unit
Controller
Problems with conventional methods: PLC control via a number of I/O is necessary
LJ-V
Camera input 2 + 2
CV-X
LJ-V
APPLI C AT I O N E X A M P L E
APPLICATION EXAMPLE
When the product being inspected changes, different lighting settings may be required
to capture the optimum image. It is possible to automatically change to the light intensity
when a different product is inspected.
BRIGHTNESS VALUE: 127
Area Camera
Area Camera
CAMs 2, 3
Coplanarity inspection
2M pixel monochrome compact camera
BRIGHTNESS VALUE: 80
Switched
to preset
CV-X
LJ-V
The optimal
brightness for
workpieces with low
reflectivity...
MULTIPLE CONTROLLERS
AVAILABLE WITH THE SAME EASE-OF-USE
Selectable according to application, processing speed, capacity, and camera choice,
with a Fan-less, HDD-less design
Our lineup includes seven types of controllers available according to the number and types
of cameras to be connected and processing speed. It is no longer necessary to use multiple
devices with different functionality for each inspection category.
In addition, the new hardware does not use components with limited life such as fans and HDDs
resulting in long-term, stable operation even under harsh factory automation environments.
CV-X100 Series
NEW
CV-X200 Series
NEW
Fan-less
Calculation DSP
HDD-less
Standard model
CV-X102
Model
Main image
processor
CV-X172
CV-X202
CV-X252
DSP
CV-X272
CV-X292
Color extraction
engine A.C.E.III
Control
RISC-CPU
Calculation DSP
Display
DSP
Multi-core DSP
Standard
Medium
High-Speed
Standard
Medium
High-Speed
High-Speed
0.31M pixel
1M pixel
2M pixel
5M pixel
21M pixel
LJ-V
Supported
cameras
CV-X152
High-performance
model
Display
DSP
CV-X202
Color extraction
engine A.C.E.II
CV-X102
Control
RISC-CPU
SINGLE-CORE
MULTI-CORE
3D INSPECTION
NEW
Conventional method:
laser displacement sensor + area camera
LJ-V Series
3D IMAGE PROCESSING
LJ-V + CV-X292
CV-X292
Profile data
With an area camera, stable character recognition is difficult due to variations in background
conditions and poorly defined stamped edges. Using 3D height information, the background can
be distinguished clearly from characters.
With an area camera, dents cannot be detected due to shading caused by complicated curved
surfaces or concaved/convexed shapes. Such detection becomes possible by extracting height
deviation from free-form plane information.
Workpiece photo
Height image
Height extracted image + OCR tool
Workpiece photo
10
Height image
Area/volume measurement
3D OBSERVATION
TREND HEIGHT
MEASUREMENT TOOL
Executes multiple height measurements across one region.
It is possible to find the maximum/minimum values and to
calculate the best-fit circle or plane among the peak values
calculated for each small cross-sections of the main region.
On a captured 3D image, a
2D profile can be displayed
between any two points by
specifying them with the mouse.
This allows the user to verify the
inspection range and settings
instantaneously.
CONTROLLER 3D DISPLAY
For improved visualization, a
3D image can be displayed as
an operation screen or together
with processed images in a
multi-screen display.
11
COLOR
Learning data
The newly incorporated Auto-Teach Inspection Tool uses the camera to learn variations and individual differences
that exist in the non-defective workpieces and recognizes workpieces that differ from these as defective
workpieces. These algorithms eliminate unstable elements to successfully guide on-site inspection. Settings are
performed just by running non-defective workpieces, and eliminates the conventional need for highly experienced
vision integrators and complicated programming. This is an inspection tool that makes it possible for anyone to
achieve and maintain a stable inspection.
Just run
non-defective
workpieces
SETTING
COMPLETED!
The variability range of the non-defective workpieces is determined by learning the full
color information for each pixel to detect defects that could never be detected with a
monochrome inspection while allowing for normal color variations among non-defective
parts.
Non-defectives learned!
Defective workpieces are automatically excluded, even if they are mixed-in during autoteach eliminating the potential for human error.
Nondefective
Different
type
Incomplete
printing
Flaw
I D E A L FO R T H E FO L LOWI N G A PPL I C AT I O NS
programming is required
1. Frequent
due to many product types
Misarrangement inspection for boxes of tissues
Setting is completed just
by running non-defective
workpieces. A wide variety
of product type elements,
including color, shape, and
pattern can be handled with a
single tool.
12
4. Variable non-defectives
Assembly defect inspection for
instrument panel buttons
This tool learns and inspects
variations such as different
thicknesses caused by different
lighting conditions, which
can occur for non-defective
workpieces. This prevents nondefective workpieces from
being rejected mistakenly.
A P P E A R A N C E/D I S C R I M I N AT I O N I N S P E C T I O N
STAIN
Edge defect inspection tool optimized for burr and flaw inspection
This tool extracts a profile from the edges of a workpiece and recognizes the sections that show
a large difference from the profile such as burrs or flaws. In addition to circles and straight lines,
ovals and profiles with complex shapes consisting of free curves are supported, based on edge
information of up to 5000 points.
This tool detects stains, flaws and other defects by comparing them against the surrounding
shading level. In addition to excellent detection ability, the tool also features a function to only
identify defects that you want to detect, by size, density, shape, and count.
Original image
Foreign particles
Burr to detect
Shallow dent is
acceptable
Stain Width
Stain level
Stain size
Scan direction:
+ side
Scan direction:
- side
Contrast image
This function displays levels of defects with
different colors depending on the intensity
differences from surrounding areas. You
can check visually and intuitively how
different the areas you really want to detect
are from the background and noise.
Since the contrast image can be checked
not only during programming, but also
during operation. This can be utilized
effectively in various scenarios, such as
investigating the cause of a false reject.
Stain/dent
Displays sections having density differences in blue to red.
In addition, it is clearly identifiable that detected stains differ
from the background.
Color Blue
64
128
192
Aqua
Green
Yellow
255
Red
: Detection threshold
13
I M AG E EN H A N C E FI LT ERS
24 types of image enhancement filters are provided to significantly compensate for changes in inspection conditions caused by workpiece conditions and external environments.
KEYENCEs original algorithms generate optimal images for inspection to improve stability and reduce scrapping of non-defective workpieces due to inspection error.
NEW
SHADING CORRECTION
Eliminates noise information within the inspection region and only highlights linear information.
This filter is particularly effective for linear defect inspection for workpieces having rough surface
conditions.
Cancels shading or uneven brightness occurring on the workpiece surface to optimize images for
inspection. Even if shading conditions change every time, this filter corrects images in real time to
only extract defective sections.
Flaw
NOISE ISOLATION
NEW
Eliminates or extracts noise having a specified area or smaller. This filter is effective for ignoring a rough background that hinders image processing or for extracting subtle defects for easier detections.
RECOGNITION OF CHARACTERS PRINTED ON CARDBOARD
14
CONTRAST EXPANSION
BLUR
NEW
Expands the density distribution within the inspection region to increase the contrast of an image.
This filter stabilizes inspection when gradation necessary for image processing cannot be obtained
due to the reflectance of workpieces.
Blurs the inspection region to remove a significant amount of fine background patterns or noise.
This filter offers more stable inspection by intentionally blurring images to eliminate aspects that
need not be inspected.
SUBTRACTION
PRESERVE INTENSITY
Compares the current image with a previously registered master image to extract sections that
differ. It is also possible to take individual differences in non-defective workpieces into account
and adjust how much differences should be recognized as defective.
Corrects changes in image brightness due to light intensity fluctuation. This filter reduces variation
in measured values caused by intensity fluctuation by correcting the brightness difference from the
reference image at every capture.
Subtracted image
=
Defective
section
Only the defective section is extracted.
Only defective sections are extracted even for targets having complex shapes such as lead frames.
Binary image
Binary image
Without preserve intensity
Binary image
With preserve intensity
15
P O S I T I O N/D I M EN S I O N M E A S U R E M EN T
DIMENSIONS/GEOMETRY TOOL
High-precision dimension inspection can be done intuitively through simple mouse operations
In most cases, dimension/geometric measurement for image processing requires multiple
tools and complicated calculation processing. With the CV-X Series, dimensions/geometry
tools can be performed with an easy point-and-click method. Points, lines, and circle
information from other tools can also be referenced making it much easier to develop
programs with multiple dimensions requiring inspection.
Points
Distance
Point/Line
Distance
Line Distance
Point/Circle
Distance
Line/Circle
Distance
Circle Distance
Line Passing
Two Points
Bisection of
Two Lines
Angle Formed by
Two Lines
Line/V-Line
Intersection
Two Lines
Intersection
Center of
Quadrangle
Midpoint of
Points
Circle Passing
Three Points
CONVENTIONAL
Calculate intersecting
coordinates between 2 lines
with the calculation function
3 Convert to actual
values and display
Scaling
10 mm.
0.39"
312.8 px
DIMENSIONS/GEOMETRY TOOL
Two Lines
Intersection
Select the feature to be
executed, and
16
EASY DETECTION!
It is also possible to
reference coordinates,
circles, or lines from other
tools that have already
been created!
A P P L I C AT I O N
Even objects with complex shapes such as below can be measured quite easily.
CAPACITOR
PRESS PARTS
LABEL
CONNECTOR TOOLS
Complex connector inspection settings can be completed by simply following guided steps
Conventionally, inspection setting for connectors with various items and points to be
measured require a significant amount of man-hours. With the CV-X connector tools, this can
be done by any user by simply following the guided steps.
Appearance
Inspection
(Area)
Appearance
Inspection
(Blob)
SETTING
COMPLETED!
Purpose-specific, guided
navigation is available,
including Change
Component and Change
Pin Number. This allows
anyone to make necessary
modifications like adapting
a program to a similar
product type with a different
number of pins.
Appearance Insp.
(Trend Edge Pos.)
Appearance Insp.
(Trend Edge Wd.)
Pin Flatness
Gap Vertical
Distance
Pitch
Frame Tilt
Housing1
Ends Distance
Appearance
Inspection
(Stain)
Appearance Insp.
(Intensity)
First image
Second image
CONNECTOR APPEARANCE
INSPECTION
Stitched image
CONNECTOR-DEDICATED
OPERATION SCREEN
Just specify
a pin or
stitching point
17
R E CO G N I T I O N I N S P E C T I O N
OCR
This tool recognizes characters printed or stamped on a product. To cope with printing conditions
constantly changing on site, KEYENCE has put utmost emphasis on visualizing important factors
for character recognition such as character extraction, stability and character library.
Reads the 1D/2D codes printed on the target workpieces. Since code reading and inspection
using another image processing tool can be done simultaneously, this function leads to space
saving and cost reduction compared with conventional cases where 1D/2D code readers and
image processor are installed separately.
1D CODE
Light intensity
fluctuation
18
CALENDAR
TOLERANCE FUNCTION
Functions equivalent to
those available on dedicated
machines are provided,
including offset, tolerance,
and zero-suppression.
2D CODES
DataMatrix
QR code
quality and thus cannot be used as a print quality verification system for
absolute value evaluation.
TO O L S EL E C T I O N C ATA LO G B A S ED O N A P P L I C AT I O N
APPLICATION NAVIGATOR
A description and typical
application for each tool is
displayed for optimal selection of
the correct inspection type.
Conventional
Tool catalog
19
C A P T U R E ( I M AG I N G )
Captures multiple images while automatically changing the shutter speed and combines them
at high speed to generate images without overexposure or underexposure. Images ideal for
processing can be captured even when on-site capture conditions vary or inspection targets
contain uneven glossiness or mixed intensities.
Removes effects due to installation and hardware related factors such as camera tilting and lens
distortion. This function offers consistent capture conditions.
CAMERA
TILTING
LENS
DISTORTION
CALIBRATION
HDR capture
(capture while automatically changing the shutter speed)
HDR
Corrects tilting
Corrects camera tilting that may
occur during installation. This is also
effective when a camera is installed
at an angle due to installation space
restrictions.
Glare removal
Stable capture results can be obtained even
for targets with a high reflectance such as
metal workpieces.
Corrected to high
accuracy!
Original image
Corrected image
Original image
Corrected image
Conventional
20
HDR capture
Conventional
HDR capture
MULTI-CAPTURE
PRE-CAPTURE
RANDOM TRIGGER
COAXIAL
LIGHT
Conventional
Enable
moving
Halt time
Capture
Image
processing
Capture
Image
processing
Capture
Image
processing
A P P L I C AT I O N
Asynchronous capture in
chip-mounter pre and
post processes
Pre-capture
LOW ANGLE
LIGHT
Halt time
Enable moving
Image
processing
Image
processing
CONVENTIONAL
MULTI - CAPTURE
CONVENTIONAL
PRE- CAPTURE
CONVENTIONAL
R ANDOM TRIGGER
21
U T I L I T I ES
UTILITIES
Easy-to-use utilities applying professional knowledge from on-site experiences.
There are many useful utilities for various situations, such as duplicating an inspection environment on another line, making adjustments due to many false detections and managing the inspection
process in real time.
Navigation that always guarantees a consistent image capture environment without relying on location.
Camera Installation Replication
CONVENTIONAL
The production line has been extended, so
I would like to expand the inspection environment without
making changes. The setting data is copiable. If I could have
replicated just the same camera installation, I wouldnt have
to readjust or start the settings all over again.
SUCCESSFUL LINE
Setting data
LINE TO DEPLOY
Copy
THE CAMERA INSTALLATION CONDITIONS OF THE NEIGHBORING SUCCESSFUL LINE ARE REPLICATED
The current image can be matched with the same capture conditions as those of the reference image. This is useful for:
1. Matching an image for a line to deploy with the reference image from a successful line.
2. Making a comparison with the reference image at the point in time when the settings were created to check if the conditions are still the same.
POSITION
ADJUSTMENT
TOOL
BRIGHTNESS
ADJUSTMENT
TOOL
Successful line
Line to deploy
FOCUS TOOL
Successful line
Line to deploy
Successful line
Line to deploy
Shows areas with different brightness from the reference image in color
so that you can adjust them to reduce the difference.
Draws grid lines in featured areas of the reference image. The position of
the camera is adjusted using the grid lines on the current image side that
is moving in tandem as a guideline.
22
Up to 20,000 pieces of measurement data can be recorded directly on the controller. It is possible to easily
check the values such as minimum, maximum, average, standard deviation, NG count, and yield rate. In
addition to the trend graphs, a list of measured values and a histogram can be displayed. Also, by using
the newly-included function, Process Monitor (process capability index: Cpk), it is possible to analyze the
inspection processes more statistically.
Every single image can be saved within the main buffer capacity range. It is also
possible to output images externally (to SD card, PC program, or FTP server) while
saving to the main buffer.
Just click the image on the image strip during setup to automatically execute a retest with that image.
Histogram view
Maximum number of images* that can be saved, organized by connected camera
Camera type
CV-X292
CV-X172
1024
1024
1001
992
16284
5490
1024
1024
489
484
13071
4396
VERTICAL CURSOR
Monochrome 2M pixel
Color 2M pixel
784
768
105
97
2114
706
Monochrome 5M pixel
Color 5M pixel
288
276
35
27
816
272
Process monitor
55
45
193
64
Error notification
Displays setting errors in a list. It is also possible to select the error from the
list screen and jump directly to the corresponding area.
23
U S ER I N T ER FAC E
USER INTERFACE
No complicated customization is required. Just select a template
To greatly simplify the customization of operation screens and improve visualization of the process, an operation screen catalog function is incorporated along with many custom functions.
Just select the best screen from the Operator Screen Catalog
Point
Parameters, whose tolerances have been set, are
automatically added to a list that displays judged
and measured values.
INTUITIVE OPERATION
WHEN CREATING SETTINGS
Just select
* Microsoft is a registered trademark of Microsoft Corporation in the United States and other countries.
24
NEW
A Custom Menu function that realizes the optimal operation with a single click
During operation, some parameters are adjusted often, and some are kept hidden to prevent misoperation. When using the custom
menu function, the optimal operator menu can be created just by placing a on parameters that are often adjusted.
OPERATION COMMENT
FUNCTION INCLUDED
A specialized menu
that compiles setting parameters
required for operation
is now complete!
When it seems that
these parameters are
adjusted often...
Click to attach a (star)
mark!
Italian
Simplified
Chinese
Korean
Traditional
Chinese
(Mexican)
French
Thai
German
Japanese
Spanish
25
U S ER M A N UA L AU TO - G EN ER ATO R/P C S O F T WA R E
CONVENTIONAL
An operation manual is
required as reference material
for a customer that
has had the equipment
installed...
Cover sheet
A list of tools
CLICK!
Loading
setting files...
CV-H1X
[STANDARD ITEM]
PC simulator
Image/data logging
User manual auto-generator
Setting file upload/download
26
MS WORD OUTPUT
TIME SAVING
PC SIMULATOR
I cannot stop my
production line for a long
time although I want to
make adjustments on site
According to changes in
manufactured items,
I need to add settings,
but the site is remote
MANUFACTURING SITE
SETTING OPERATOR
MANUFACTURING SITE
APPLICATION SAMPLE
Correct settings using
simulation software
Images and measurement results from a connected controller can be acquired into a PC. Using the
Ethernet
remote desktop function, maintenance man-hours can be reduced significantly since tasks that require
travel to on-site locations can be accomplished remotely, including setting change for a controller at
another plant.
Office PC
27
CO M M U N I C AT I O N A N D CO N T R O L
COMMUNICATION INTERFACE
Supports linking to PLCs made by several manufacturers as well as EtherNet/IP and PROFINET, which enables easy integration into an existing
system. In addition, remote control via connection to a personal computer and image/result logging to an FTP server are also available.
CV-H1X
SIMULATION-SOFTWARE
Setting file upload/download
TERMINAL-SOFTWARE
Switching hub
Personal computer
VNC
ActiveX
RS-232C/Ethernet
PLC link
PLC LINK
28
PLC
KEYENCE: KV Series
Omron: SYSMAC Series
Mitsubishi Electric: MELSEC Series
YASKAWA Electric: MP Series
S E C U R I T Y/ACCO U N T
SECURITY/ACCOUNT
Robust security that protects program assets
For image sensor operation, it is important that the setting contents are easy to understand and can be easily accessed. On the other hand, there is an extremely strong need not to disclose program
contents and prevent the copying of setting files. With the CV-X Series, robust security functions that answer these demands have been prepared and separated by purpose.
CONTROLLER ID LOCK
This is a function that does not start program settings with controllers other than those that have the
specified unique ID (controller ID). This is useful in protecting against the copying of program assets
and unintended controller operation.
If a tool edit lock is applied, browsing or editing program setting contents will no longer
be possible. This prevents the external outflow of programming knowledge, such as the
parameter values or pre-processing filters used.
Controller ID:
9876543210
Controller ID:
0123456789
Tool edit
lock
PASSWORD SETTINGS
The entry of up to 32 characters is supported for
the password. This feature meets demands for more
secure password management.
ACCOUNT SETTINGS
ADMIN
OPERATOR
USER
29
Presence/Discrimination
ELECTRIC EQUIPMENT/OTHERS
Position/Angle
Dimensions/Geometry
Stain/Flaw
Terminal misalignment
OK product
NG product
OK product
NG product
OK product
NG product
Raw image
Processed image
3D
Wire bonding inspection
Break
Full image
30
Magnified image
Before alignment
After alignment
Conventional method
3D image
Processed image
ELECTRONIC COMPONENTS
Presence/Discrimination
Stain/Flaw
Position/Angle
CCD stain inspection
Auto-Teach
Inspection
OK product
Missing IC
Magnified image
OK product
NG product
OK product
NG product
Connector
Marking density inspection for capacitor
Auto-Teach
Inspection
Stain
OK product
NG product
OK product
NG product
NG product
Contrast image
OK product
NG product
31
TRANSPORTATION
Presence/Discrimination
Position/Angle
3D
Auto-Teach
Inspection
Angle misalignment
OK product
NG product
OK product
OK product
NG product
NG product
3D image
Processed image
Stain/Flaw
Type discrimination for wheels
Auto-Teach
Inspection
Cutting chip
OK product
32
Different type
OK product
NG product
OK product
NG product
3D image
NG product
Presence/Discrimination
Type differentiation for seat belt buckles
METAL COMPONENTS
Stain/Flaw
Position/Angle
Flaw
OK product
NG product
NG product
Magnified image
NG product
OK product
3D
Burr inspection for washers
OK product
NG product
NG product
Magnified image
Raw image
Shading-corrected image
3D image
3D image
33
Presence/Discrimination
FOOD/PHARMACEUTICALS/CONTAINERS
Stain/Flaw
Identification
Position/Angle
Auto-Teach
Inspection
OK product
NG product
OK product
NG product
OK product
NG product
OK product
NG product
3D
Variant mixed-in inspection for caps
Auto-Teach
Inspection
Chipped mouth
OK product
34
NG product
OK product
NG product
OK product
NG product
3D image
Processed image
Presence/Discrimination
Discrimination of cell color
OK product
NG product
LCDS/SEMICONDUCTORS/OTHERS
Stain/Flaw
Position/Angle
Chipped edge
Dimensions/Geometry
Before alignment
After alignment
Count
NG product
Magnified image
Identification
Counting the number of SD cards
OK product
NG product
OK product
NG product
Wafer alignment
Full image
Magnified image
OK product
NG product
35
ENT
MEASUREM
VISION
IMAGE
N
DIMENSIO
ENT
MEASUREM
SYSTEM
ED
HIGH-SPE
OPTICAL
ER
MICROMET
HIGH-END
STEM
VISION SY
IM
LK/LS
XG-L
LINE A
CAMER
LINE
1D
N
INSPECTIO
DIGITAL
OPE
MICROSC
VISION
INTUITIVE
SYSTEM
CV-X
VISION
HIGH-END
SYSTEM
VHX
2D
ENT
MEASUREM
R
SO
N
SE
TM
XG
2D
SPECTION
MATRIX IN
3D Vision
Inspection
CV-X/ XG
3D
2D/3D
ENT
MEASUREM
SYSTEM
L J-V
3D
ENT
MEASUREM
OPE
MACROSC
VR
INSPECTIO
WWW.VISIONSYSTEM.COM
CALL
TOLL
FREE
T O C O N TA C T Y O U R L O C A L O F F I C E
1-888-KEYENCE
1 - 8 8 8 - 5 3 9 - 3 6 2 3
www.keyence.com
SAFETY INFORMATION
Please read the instruction manual carefully in
order to safely operate any KEYENCE product.
AL
CA
CA
Birmingham
N.California
Los Angeles
CO Denver
FL Tampa
GA Atlanta
IL
IN
KS
Chicago
Indianapolis
Kansas City
KY Louisville
MA Boston
MI Detroit
OR Portland
PA Philadelphia
SC Greenville
TN
TN
TX
Knoxville
Nashville
Austin
TX Dallas
VA Richmond
WA Seattle
Milwaukee
WI
The information in this publication is based on KEYENCEs internal research/evaluation at the time of release and is subject to change without notice.
Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved.
E-mail: keyencemexico@keyence.com
KA3-1024