Professional Documents
Culture Documents
Canon Flash 580EXii
Canon Flash 580EXii
SPEEDLITE
580EXII
INSTRUCTION MANUAL
MODE D'EMPLOI
MANUAL DE INSTRUCCIONES
Canon
SPEEDLITE
SBOEXII
Thank you for purchasing a Canon product.
The Canon Speedlite 580EX II is an EOS-dedicated, high-output flash
unit automatically compatible with E-TTL II, E-TTL, and TTL autoflash.
It can serve as an on-camera flash as well as a master unit or a slave
unit in a wireless, multiple-Speedlite system. It has the same dust- and
water-resistance as EOS-1D series cameras.
2
Contents
2 Using Flash 13
3 Wireless Flash 33
4 Reference........................................................................... 47
3
Nomenclature
Flash head/
Wireless
transmitter
canon
SPEEDLITE S80EX II
Wireless sensor---:---:;.c--
Shoe
4
<PUSH>
Bounce lock release
LCD panel-----,. button (p.18)
<PILOT> - - - - - - T -
Pilot lamplTest firing/
Wireless slave power
ON button (p.1 0/38)
I:il Asterisked buttons have functions which remain active for 8 sec. after you
press and let go of the button. The < =f>.: > illumination lasts for 12 sec.
5
LCD Panel
~~-+--Slave 10
Custom Function
6
Getting Started and
Basic Operation
QoickFlash ...
Approx. 0.1 - 2.5 sec. Approx. 0.1 - 5 sec. Approx. 100 - 700
• Based on new size-AA alkaline batteries and Canon's testing standards.
• Quick flash enables a flash to be fired before flash-ready (p.1 0).
. . • Using size-AA batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
• If you change the batteries after firing many flashes continuously, be
aware that the batteries might be hot.
til ~ Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
~ Size-AA Ni-MH or lithium batteries can also be used.
8
Attaching to the Camera .IIIIIIIIIIIIL_~IlJ:IJI.IIIIUII
1 Attach the Speedlite.
• Slip the Speedlite's mounting foot into
the camera's hot shoe all the way.
3 oewtahc,hle the
.. I
s,peethdlilte· I
pressing e oc k-re ease
button, slide the lock lever to the left
and detach the Speedlite.
9
Turning on the Power Switch II,. . . ._ . . . .
l:il • A test flash cannot be fired while the camera's operation timer ~4 or ~6
is active.
ill) The Speedlite's settings will be retained in memory even after the power
is turned off. To retain the Speedlite's settings after you replace the
batteries, turn off the power and replace the batteries within 1 minute.
10
Fully Automatic Flash Shooting 1ji."_'• •'''~ll
When you set the camera's shooting mode to < P> (Program AE) or
< 0 > (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as
easy as normal AE shooting in the < P > and < 0 > modes.
l .-n
("_, ,-,-
:,.,:. • Focus the subject.
Press the shutter button halfway to focus.
The shutter speed and aperture will
be displayed in the viewfinder.
;~ Check that the < ~ > icon is lit in the
viewfinder.
CiI • <ETTL> will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
• If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's ISO speed.
11
Using E-TTL II and E-TTL Autoflash in the Shooting Modes ..
Just set the camera's shooting mode to < Av> (aperture-priority AE),
<Tv> (shutter-priority AE), or <M> (manual) and you can use E-TTL III
E-TTL autoflash.
Select this mode when you want to set the shutter speed manually.
The camera will then automatically set the aperture matching the shutter
speed to obtain a standard exposure.
Tv
~ If the aperture display blinks, it means that the background exposure will
be underexposed or overexposed. Adjust the shutter speed until the
.... aperture display stops blinking .
Select this mode when you want to set the aperture manually.
The camera will then automatically set the shutter speed matching the
aperture to obtain a standard exposure.
If the background is dark like a night scene, a slow sync speed will be used
to obtain a standard exposure of both the main subject and background.
Standard exposure of the main subject is obtained with the flash, while a
Av standard exposure of the background is obtained with a slow shutter speed.
• Since a slow shutter speed will be used for low-light scenes, using a
tripod is recommended.
• If the shutter speed display blinks, it means that the background
exposure will be underexposed or overexposed. Adjust the aperture until
the shutter speed display stops blinking.
Select this mode if you want to set both the shutter speed and aperture
manually.
M Standard exposure of the main subject is obtained with the flash. The
exposure of the background is obtained with the shutter speed and aperture
combination you set.
• If you use the < DEP > or < A·DEP > shooting mode, the result will be the same as
using the < P > (Program AE) mode.
12
Using Flash
[]] If flash exposure compensation has been set with both the Speed lite and
camera, the Speed lite's flash exposure compensation amount will override
the camera's.
l!DiI Setting the flash exposure compensation can be limited to only the <@>
dial. (C.Fn-13 ~ p.27)
14
~ FEB
You can take three flash shots while automatically changing the flash
output for each shot up to ±3 stops in 1/3-stop increments (1/2-stop
increments if the camera enables only 1/2-stop increments). This is
called FEB (Flash Exposure Bracketing).
III • After the three shots are taken, FEB will be cancelled automatically.
., For FEB, set the camera's drive mode to single shooting. Be sure the
flash is ready before shooting.
• You can also combine FEB with flash exposure compensation and FE
lock.
l!Im You can prevent the FEB from being cancelled automatically after the
three shots are taken. (C.Fn-03 ~ p.27)
l!Im The FEB shooting sequence can be changed. (C.Fn-04 ~ p.27)
15
FEL: FE Lock
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With <ETTL> displayed on the LCD panel, you press the camera's
< FEL > button. If the camera does not have the < FEL > button, press the
<*> button.
.. $ If the subject is too far away and underexposure will result, the < ~ > icon
will blink in the viewfinder. Move closer to the subject and try the FE lock
again.
it If <ETTL> is not displayed on the LCD panel, FE lock cannot be set.
• If the subject is too small, FE lock might not be very effective.
16
With high-speed sync (FP flash), the flash can synchronize with all
shutter speeds. This is convenient when you want to use aperture
priority for fill-flash portraits.
[l) ~ If you set a shutter speed that is the same or slower than the camera's
maximum flash sync speed, <~H> will not be displayed in the viewfinder.
i~\ With high-speed sync, the faster the shutter speed, the shorter the
effective flash range will become. Check the LCD panel for the effective
flash range.
;(l$. To return to normal flash, press the <~H/~> button again. The <DB>
icon will disappear.
•%I.~ Stroboscopic flash cannot be set.
17
Bounce Flash •
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is called bounce
flash.
. . ., If the wall or ceiling is too far away, the bounced flash might be too weak
and result in underexposure.
0\ The wall or ceiling should be a plain, white color for high reflectance. If
the bounce surface is not white, a color cast may result in the picture.
.. After you take the shot, if the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again.
18
Creating a Catchlight
With the catchlight panel, you can create a catchlight in the subject's
eyes to add life to the facial expression.
.. $ Point the flash head straight ahead and then upward by 90 0 • The
catchlight will not work if you swing the flash head left or right.
'. For maximum catchlight effect, stay within 1.5 m/4.9 ft of the subject.
19
ZOO M: Setting the Flash Coverage and Using the Wide Panel t~
The flash coverage can be set to match the lens focal length from
24mm to 105mm. The flash coverage can be set automatically or
manually. Also, with the built-in wide panel, the flash coverage can be
expanded for 14mm wide-angle lenses.
aJ • If you set the flash coverage manually, make sure it covers the lens focal
length so that the picture will not have a dark periphery.
• If you use a commercially-available sync cord to connect the camera to
the Speedlite's PC terminal, set the flash zoom manually.
aJ The flash coverage will not be compatible with the EF15mm f/2.8 Fisheye
lens.
U tl If you use bounce flash with the wide panel in place, the entire display on
the LCD panel will blink as a warning. Since the subject will be
illuminated by both the bounce flash and direct flash, it will look
unnatural.
{, Pullout the wide panel gently. Using excessive force may detach the
wide panel.
20
Auto Zoom for Image Size
EOS DIGITAL cameras have one of three image sizes. The lens'
effective focal length will differ depending on the camera's image size.
The Speedlite automatically recognizes the EOS DIGITAL camera's
image size and automatically sets the flash coverage for lens focal
lengths from 24mm to 105mm.
When the Speedlite is attached to a compatible camera, < § > will
appear on the Speed lite's LCD panel.
ETTL
-------
0.5 0.7 1 1.5 2 3 4 6 9 13 18 m
21
M: Manual Flash
You can set the flash output from 1/128 power to 1/1 full power in 1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure.
Zoom SOmm
iii Press the shutter button halfway to
see the effective flash range
M
displayed.
0.5 0.7 1 1.5 2 3 -
4 6 9 13 18 m
22
Metered Manual Flash Exposures
When the Speedlite is attached to an EOS-1 0 series camera, you can
set the flash level manually for closeup subjects.
[i] This feature works only with EX-series Speed lites with manual flash coupled
with an EOS-1D series camera.
23
M ULTI - S troboscop.- C FIash
• ~'il\~~~!l'i~'l;:~:~.~1i.~\il-·'~\''fI.,.l;~a"l''ii!,\\.~~~\'f.lt\!>l'''i1<;I!~\l
~~ft..~~'~~~~\l~;',*,~>1\ 1~~\.~W:_~_1~~~~~.~~_~~i~
item (blinks).
24
-- To avoid overheating and deteriorating the flash head, do not use stroboscopic
flash more than 10 times in succession. After 10 times, allow the Speedlite to
rest for at least 15 min. If you try to use the stroboscopic flash more than 10
times in succession, the firing might stop automatically to protect the flash
head. If this happens, allow the Speedlite to rest for at least 15 min.
~
Flash Outpu
1/4 7
1 2
6
3
5
4
4
5
4
6-7
3
8-9
3
1/8 14 14 12 10 8 6 5
1/16 30 30 30 20 20 20 10
1/32 60 60 60 50 50 40 30
1/64 90 90 90 80 80 70 60
1/128 100 100 100 100 100 90 80
~
Flash Outpu
1/4
.
10
2
11
2
12 -14 15·19 20 - 50 60 -199
2 2 2 2
1/8 4 4 4 4 4 4
1/16 8 8 8 8 8 8
1/32 20 20 20 18 16 12
1/64 50 40 40 35 30 20
1/128 70 70 60 50 40 40
~ If the number of flashes is displayed as - -, the maximum number of flashes will
be as shown by the table below regardless of the firing frequency.
Flash Output 1/4 1/8 1/16 1/32 1/64 1/128
Flash Count 2 4 8 12 20 40
25
~ Second-Curtain Sync
With a slow shutter speed, you can create a light trail following the
subject. The flash fires right before the shutter closes.
26
C.Fn: Setting Custom Functions ~
You can customize Speedlite features to suit your shooting preferences.
You do this with Custom Functions.
Custom
Setting Reference
Function Function Settings & Description
No. page
No.
0 Meters (m) -
C.Fn-OO Distance indicator display
1 Feet (ft) -
0 Enabled
C.Fn-01 Auto power off p.10
1 Disabled
Enabled (Depth-of-field preview
0
button)
C.Fn-02 Modeling flash 1 Enabled (Test firing button) p.44
2 Enabled (with both buttons)
3 Disabled
0 Enabled
C.Fn-03 FEB auto cancel
1 Disabled
p.15
0 O~-~+
C.Fn-04 FEB sequence
1 -~O~+
27
1
~
Hold down the < :,(~>:-/C.Fn > button
F" []: [] until < CIm > is displayed.
8---
Select the Custom Function No.
~ Turn the <@ > dial to set the Custom
Function No.
,3 Change the setting.
• Press the < @ > button.
~ The Custom Function No. blinks.
\ LOCK ~ L/ , I ,
Turn the < @> dial to set the desired
~~_F_"_[]_2__-'_I:_'--" number, then press the < @ > button.
~, After you set the Custom Function
and press the <MODE> button, the
camera will be ready to shoot.
28
C.Fn-02-3: Convenient when you want to check the depth of field. (p.44)
C.Fn-12: If an external power source is used, the flash recycling is
powered concurrently by the internal batteries and external
power source. In this case, when the internal batteries
become exhausted first, shooting might not be possible. If 1
is set, the flash recycling will be powered only by the
external power source. The internal batteries will thereby
last longer. Note that even if you set it to 1, the Speedlite will
still require internal batteries for flash control.
[]] With Type-B cameras, even if C.Fn-05-0 is set, E-TTL II/E-TTL autoflash will
not work.
29
External Flash Metering
The flash reflected off the subject is metered by an external metering
sensor in real time. When the standard flash exposure is attained, the
flash output is cutoff automatically. Auto external metering compatible
with the EOS-1 D Mark III and manual external metering compatible with
all EOS cameras are provided.
[i] • With auto external metering, the camera's ISO speed and aperture will
be set automatically in real-time by the Speedlite.
\~ Auto external metering will also work with flash exposure compensation
(p.14) and FEB (p.15).
30
3 Set the Speedlite to the camera's
aperture setting.
• Press the < @ > button so the
aperture setting blinks.
• Turn the <@» dial to set the
aperture, then press the <@> button.
LCD panel.
• With manual external metering, you can connect the camera to the
Speed lite's PC terminal with a sync cord and place the Speedlite at a
different position from the camera.
e You cannot connect a Speed lite to another Speedlite's PC terminal with
a sync cord. The second Speedlite will not fire.
31
Speedlite Control with the Camera's Menu Screen II
If the Speedlite is attached to an EOS camera which has a Speedlite
control function, it can control the Speedlite as shown below. For the
menu operation procedure, refer to your camera's instruction manual.
U If flash exposure compensation has already been set with the Speedlite,
flash exposure compensation cannot be set with the camera. To set it with
the camera, first set the Speedlite's flash exposure compensation to zero.
~ If any Speedlite Custom Functions and flash function settings other than
flash exposure compensation have been set by both the camera and
Speedlite, the latest setting will take effect.
32
Wireless Flash
~....
'.
'"
Outdoors '--A...}'-r---.-___
emmI......
".
34
Multi-Speedlite, Wireless Lighting Configurations
You can create two or three slave groups and set the flash ratio for E-
TTL II autoflash shooting (p.41 - 45).
Wireless flash with two slave groups (p.41)
Outdoors ,--~...,-----
Outdoors 1_--__
35
Wireless Settings ~.I{r ~1l\1I.-lirE'. '. . . .l11li
You can switch between normal flash and wireless flash. For normal
shooting, be sure to set the wireless setting to OFF.
, I ~
... \ I /-0
IMMdj' .e.
n- ~ Turn the < @ > dial until < MASTER >
-""2.-. '"
--'-1-'------
-
~ I , ....
1 ,
36
Fully Automatic Wireless Flash ~lf6~
This method has all the Speedlites fire at the same flash output with E-
TTL II autoflash controlling the total flash output.
37
Check the flash operation .
• Press the master unit's test firing
button.
l\'" The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
Set the camera and shoot.
• Set the camera in the same way as
with normal flash shooting.
Outdoors /
~ 10m (32.8ft.)
• Use the mini stand (tripod socket provided) to prop up the slave unit.
,,~ Use the bounce feature to swing the slave unit so that its wireless
sensor faces the master unit.
e Indoors, the wireless signal can also bounce off the wall so there is
more leeway in positioning the slave unit(s).
<8' After positioning the slave unit(s), be sure to test the wireless flash
operation before shooting.
• Do not place any obstacles between the master unit and slave
unit(s). Obstacles can block the transmission of wireless signals.
38
[.lJ 4» The Speedlite's zoom setting will be set automatically to 24mm. It is possible to
change the master unit's zoom setting. However, note that the master unit
transmits wireless signals to the slave unit(s) with the preflash. Therefore, the
flash coverage must cover the slave unit's position. If you change the master
unit's zoom setting, be sure to test the wireless flash operation before shooting.
• If the slave unit's auto power off takes effect, press the master unit's test
firing button to turn on the slave unit.
e A test flash cannot be fired while the camera's operation timer 04 or 06 is active.
[!liD The slave unit's auto power off time can be changed. (C.Fn-1 0 ~ p.27)
[!liD The time during which the slave unit's auto power off can be canceled by
the master unit can be changed. (C.Fn-11 ~ p.27)
[lI Even if you disable the master unit's flash firing, it will still fire a preflash to
transmit wireless signals.
39
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
operate the slave unit(s). Wireless flash with the following settings can
be done in the same way as with normal flash shooting.
ril With FE lock, if even one Speedlite will result in underexposure, the < ~ >
icon will blink in the viewfinder. Open the aperture more or move the slave
unit closer to the subject.
40
Flash Ratio with E-TTL II
With one master unit and one slave unit or two slave groups, you can
set the flash ratio for E-TTL II autoflash shooting.
The example below has two slave units and the master unit disabled
from firing.
41
3 Set the slave 10.
e Press the < @ > button .
.. Slave ID <A> will be set.
.. For the other slave unit, do steps 1
and 2, turn the < @> dial to select
< B>, then press the < @ > button.
• Slave ID < B > will be set.
MASTER
[l] With the EOS ELAN II/ELAN II E/SO/SOE, EOS REBEL G/SOON, EOS IX,
EOS IX Lite/IX?, EOS REBEL 2000/300, and REBEL XS N/ REBEL G 11/
EOS 3000N/66, the flash ratio cannot be set with multiple Speedlites.
42
[l] • The flash ratio range of8:1 -1:1 -1:8 is equivalent to 3:1 -1:1 -1:3 in
stops (1/2-stop increments).
• The flash ratio under the • mark is shown in parentheses below the scale.
---------------
8:1 • 4:1 • 2:1 • 1:1 • 1:2 • 1:4 • 1:8
(5.6:1) (2.8:1) (1.4:1) (1:1.4) (1:2.8) (1:5.6)
Indoors
12m (39.4ft.)
You can have slave groups A and B and also add slave group C. You can use
slave groups A and B to obtain the standard flash exposure of the subject,
and slave group C to illuminate the background to eliminate shadows.
43
Set the master unit and shoot.
~" Follow "Setting the Master Unit and
Shooting" on page 42. In step 4,
select <A: B C>.
U If < -iMn,. A: B> is set, the slave unit in slave group < C> will not fire.
,i%'
• If you point the slave unit in slave group < C > toward the subject, the
subject will be overexposed.
Modeling Flash
If the camera has a depth-of-field preview button, pressing it will fire the
flash continuously for 1 sec. This is called the modeling flash.
It enables you to see the shadow effects on the subject and the lighting
balance. You can fire the modeling flash for both wireless and normal
flash shooting.
U Do not fire the modeling flash more than 10 consecutive times. If you
fire the modeling flash 10 consecutive times, allow the Speedlite to
rest for at least 10 min. to avoid overheating and deteriorating the flash
head.
[lJ The modeling flash cannot be fired with the EOS REBEL 2000/300 and
Type-B cameras (p.2).
44
Setting the Flash Output for Each Slave ~JJ'~:1
With manual flash and multiple Speedlites, you can set a different flash
output for each slave unit.
All settings are done with the master unit.
mJZoom 2'-1mm
... 1..-
3 Select the flash ratio.
M
... 0 n' ... :? ~ Turn the <@ > dial to select <A: B>
or < A: B: C >, then press the < ® >
- button.
45
Setting Manual Flash and Stroboscopic Flash with the Slave _
Manual flash or stroboscopic flash can be set manually with the slave
unit. As with studio flash units, you can set the flash output individually
with the slave units for wireless or manual flash.
Manual Flash
mlZoom 2Ymm • Hold down the <MODE> button for 2
, I ,. 1/ /6 sec. or more.
,,'
-M- K:l"
z.~' 1 _,.,S!A- """ < M > will blink.
• Set the manual flash output (p.22).
Stroboscopic Flash
mlZoom 2Ymm • Hold down the <MODE> button for
" t., :/128 /5- 'lOHz 2 sec. or more.
-MuLTI- K:l . .
", I "2..11 .i'·"M .-. < M > will blink.
.. Press the <MODE> button again
and < MULTI> will blink.
• Set the stroboscopic flash (p.24).
46
Reference
580EX II System................................................... 48
Troubleshooting Guide......................................... 50
Specifications 52
Using a Type-B Camera....................................... 55
CD~~~
® ~r------I -------------------1
~
~82 ~
§
~1I1111111111~ §
§
I Q)
... For the external power pack, use @ above. If a non-Canon, external
power pack is used, it may cause malfunction.
48
About Color Temperature Information Transmission
When the flash fires, the color temperature information is transmitted to
the EOS DIGITAL camera. This feature optimizes the flash picture's
white balance. When the camera's white balance is set to < a¥l3 > or
< ~ >, it will work automatically.
To see if this feature works with your camera, see "White Balance"
under "Specifications" in your camera's instruction manual.
49
Troubleshooting Guide
If there is a problem, refer to this Troubleshooting Guide.
.. Place the slave unit within the master unit's transmission range.
(p.38)
~, Point the slave unit(s)'s sensor toward the master unit. (p.38)
50
Auto zoom does not work.
• The Speed lite is -not attached securely to the camera.
~, Attach the Speedlite's mounting foot securely to the camera. (p.9)
51
-Type
Type: On-camera, E-TTL II/E-TTL/TTL autoflash Speedlite
Compatible cameras: Type-A EOS cameras (E-TTL II/E-TTL autoflash)
Type-B EOS cameras (TTL autoflash)
Guide No.: 58/190 (at 105mm focal length, ISO 100 in meters/feet)
Flash coverage: 24 - 105mm (14mm with wide panel)
· Auto zoom (Flash coverage set automatically to match the
lens focal length and image size)
· Manual zoom
· Swinging/tilting flash head (bounce flash)
Flash duration: Normal flash: 1.2 ms or shorter, Quick flash: 2.3 ms or shorter
Color temperature
information transmission: Flash color temperature information transmitted to camera
when flash is fi red
- Exposure Control
Exposure control system: E-TTL II/E-TTL/TTL autoflash, auto/manual external
metering, manual flash
Effective flash range: Normal flash: Approx. 0.5 - 30 m I 1.6 - 98.4 ft.
(With EF50mm f/1.4 lens Quick flash: 0.5 - 7.5 m I 1.6 - 24.6 ft. (min), 0.5 - 21 m I 1.6 -
at ISO 100) 68.9 ft. (max)
High-speed sync: 0.5 -15 m 11.6 - 49.2 ft. (1/250 sec.)
Flash exposure
compensation: Manual, FEB: ±3 stops in 1I3-stop increments (Manual and
FEB can be combined)
FE lock:
High-speed sync: Provided
*
With < FEL > button or < > button
52
• Wi reless Flash
Transmission method: Optical pulse
Channels: 4
Wireless options: OFF, Master, and Slave
Transmission range (Approx.):
Indoors: 12 - 15 m / 39.4 - 49.2 ft.,
Outdoors: 8 - 10m / 26.2 - 32.8 ft.
Master unit reception angle: ±40° horizontal, ±30° vertical
Controllable slave groups: 3 (A, B, and C)
Flash ratio control: 1:8 - 1: 1 - 8: 1 in 1/2-stop increments
Slave-ready indicator: AF-assist beam blinks
Modeling flash: Fired with camera's depth-of-field preview button
• Power Source
Internal power: Four size-AA alkaline batteries
* Size-AA Ni-MH and lithium batteries also usable
Battery life
(Approx. flash count): 100 - 700 flashes (with size-AA alkaline batteries)
Wireless transmissions: Approx. 1500 transmissions (With master unit firing disabled
and size-AA alkaline batteries)
Power saving: Power off after certain period of idle operation (Approx. 1.5 min.
to 15 min.) (60 min. if set as slave)
External power: Compact Battery Pack CP-E4
• Dimensions
(W x H x D): 76 x 137 x 117 mm / 3.0 x 5.4 x 4.6 in.
(excluding dust- and water-resistant adapter)
53
Guide No. (at ISO 100, in meters/feet)
Manual Flash
Flash Coverage (mm)
Flash Output
14 24 28 35 50 70 80 105
151 281 301 361 421 501 531 581
1/1
49.2 91.9 98.4 118.1 137.8 164 173.9 190.3
..
10.61 19.81 21.21 25.51 29.71 35.41 37.51 411
1/2
34.8 65 69.6 83.7 97.4 116.1 123 134.5
7.5/ 14/ 15/ 18/ 21/ 251 26.5/ 29/
1/4
24.6 45.9 49.2 59.1 68.9 82 86.9 95.1
...
54
Using a Type-B Camera
If you use the 580EX II with a Type-B camera (TTL autoflash camera),
note the available features and restrictions below.
When a Type-B camera is used with the 580EX II set to autoflash,
< TTL> will be displayed on the Speed lite's LCD panel. (With a Type-A
camera, <ETTL> will be displayed.)
55
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made,
you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
56
The apparatus shall not be exposed to dripping or splashing.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
Dry batteries shall not be subjected to charging.
~"" This mark indicates that the product complies with Australia's EMC
" regulations.
57
Canon
PRINTED IN JAPAN
IMPRIME AU JAPON
CT1-7768-000 © CANON INC. 2007 IMPRESO EN JAPON
Ca-o:-.. I..
'ft:''//1J)l.7111~~-t:::A.
'II
CANON PHOTOGRAPHIC PRODUCTS
INTERNATIONAL SERVICE NETWORK
~al;:J:::lJlll£pqg~Jf:J!9.QI;h3t.l'.Jjt)iJ;9o o Anderungeo des Inhalts dieses Dol<uments sind ohne VorankOndigung vorbehalten
~I) A "1'::f!I{l.\"1-l::.A~QO)mJl,.\abttld:§±t!!J!£0)"J!l!D"f:)rJJl,.\abttIl1.\*9 0 Reseau International des Serviees Canon Appareil-Photo
VotreapparellCanonpourra~trereparedansuodescentresdeserviceapres·venteagreesindKjuesdarlslalisteci·dessoos.llserareparesousgarantie contre presentation
Canon Photographic Product International Service Network du CertifiCat de Garantie (avec la marque $ du Syste;me de Garantie I~lematiorlale Canon) dans les centles de service apres·venle indiques par la marq.ue $ dans les ~ys
Serv'ce of your Canon product will be provided al any of the listed authorized service facilities. Warranty service 01 products with intemational Warranty certificate (with the ou reglOns aut res Que celul ou te prodUlt a ele achete. Vous devrez presenter vofte certifocat de garantie pour toute demande de rt~paratlon pendanl ta penode de vahdlte de
symbol o!I for Carlorl Intematiorlal Warrarlty System indicated above) will be provided at the listed service lacilrties marked o!I in areas other than the country or region lagarantie.ToutefoiS,lesreparationsseroniavos!raissivousnepresenlezpasvolregaranlieousiellenecomportenil'adressedu'evendeurnila date d'achat du produit
w~re the prodllCt was purchased. You must present your warranty certificate when requesling repairs during the warranty period. If no certificate is presented. or il the o Certaines reparations peuvent neeessiter des commandes de pieces speciales. Dans ce cas, elles peuvent durer plus longtemps que prevu
warranty does notbeal the place and date of purctlase. you will be ctlarged the cost of the repairs. o Lecontenudecedocumentpeutlairel'objetdemoditicalionssanspreavis
oSome types of repair may require that parts be ordered specially. Irl this event. the repairs may take longer than usual.
oThe contents of this document are sUbjeci to change without notoce Rete 01 Assistenza Internazionale Per Fotocamere Canon
L'Assistenza del prodono Canon aCQuistato sara lomifa presse uno QualSiaSi dei centri di assislenza autorizzali riportati nella lista.
L'assist.enza in gara~zia di pradoni ,con certificato di garanzi~ intemazionale, (con il simbolo E!1 per il sistema di garanzia. internaziona.le Canon S9pra indicato) sara lomit~
pressolcentndiasslslenzariportaltnellalislacontrassegnafldao!linareedlversedalpaeseodallareglonelnCulestatoacqulstatOllprooono.Enecessanopresentarell
certificato di garanzia di cui si e in possesso Quando si rechiedono prestazioni di assistenza durante il perioclo di validita della garanzia, Se non si presenfa il certificato. 0
se la garanzia non reca Ie indicazioni delluogo e della dala di aCQuislO, la riparazione sara a pagamenlo.
• Per aleuni tipl di riparazione puo essere necessario ordinare a parte i pezzi di ricambio. In Questo caso, la riparazione richiedera piu tempo del normale
e
oil conlenuto di Questo documento soggeno a mQdifiche senza preavviso.
Sistema Internaclonal de Servieio de Camaras Fotogrtrflcas Canon
EI servicio de su prodUcio Canon sera proporcionado por cualquie,a de las instalaciones de servicio autorizadas menc'onadas en la lista. EI servicio de garantia de los
productos con certi!icado de Garantia Intemacional (con el simbolo E!1 del Sistema de Garantla Inlernacional de Canon indicado arriba) sera proporciooado por las
instaiaciones de servicio Que Iiguran en la lisla con la marca E!1. en otras areas distintas dol pais 0 de la region donde se adquiriQ el producto. Cualquier sclicitud de
reparacionduraflteelperiododegarantiaserealizaraalpresentarelcertificadodegaranliadebidamentellenaooincluyendoellugarylafechadecompra.encascdeno
serasila reparaci6nsera con cargo al dienle.
o Algunos tipos de reparaciones podrian requerir un pedido especial de repueslos. En lal casc. las reparaciones podrian demorar mas de 10 habitual
·Loscontenidosdeestedocumentoseencuenlransujetosacam~ossinprevioaviso.
C" ) - Country & Area Code PORTUGAL @SEQUES.A. Praca da Alegria. 58-2. 1269-149 Lisboa Phone (351) 021·3242830
.,.gH. "'fiililliillillijfi SLOVENIA @ 3A AUDIO VIDEO Servis http://www.3a-servis.si Phone (386) 01-5461000
SPAIN @ Canon Espana, S.A. Joaquin Costa. 41. 28002 Madrid Phone: (34) 09t ·5384500
REGIONAL CANON MARKETING JAPAN INC. Phono' (81) 03-3455-9353
SWEDEN (i) Canon Nordie Regional Competence Center htlp:flwww.canon.se Phone 08·7448620
HEADQUARTERS
SWITZERLAND @ Canon Schweiz AG http://www.canon.ch Phone: 0648-633-838
UNITED KINGDOM @ Canon UK Regional Competence Center http://www,Canon,co.uk Phone 08-705-143723
HONG KONG II) Canon HongKOflg Co. Ltd. - Domestic Sales Office
"'10'4 •• ';U!.I.,~%;g.j,,' CZECH REP. @ Canon CZ S.R.O.
@AWHservice
t6000 Praha 6
Mi'esovska 1, 130 00 Praha 3
Phone
Phone
(420) 02·25280·111
(420) 02·22721·525
POLAND @ Canon Polska SP.Z.O.O. htlp:ffwww.canon.pl Phone (48) 022-572-30·00
o Kowloon Depot: Phone: (852) 2170-2888
@ CSt Foto Video ul. Zytnia 15. 01·014 Warszawa Phone (48) 022-862·41-38
t8lF The Metropolis Tower, to Metropolis Drive Hunghom. Kowloon Hong Kong Fax: (852) 2428-3963
o HongKong Depot: Phone (852) 2170·2888 SLOVAKIA @ProLalka Radlinskcho 26, 811 07 Bratislava Phone' (421) 02-544t-4880
CYPRUS @ NT. Kakoylannis/Paroulls Electronics Ltd. 115 Omonias Avenue Paroutis Building, Phone (357) 25·384306
10/F Beverly House. 93-107 Lockhart Rd. Wan Chai. Hong Kong Fax (852) 2428-3963
3045 Limassol (357) 25-568274
INDONESIA (fl PI. INTER-DELTA Tbk Phone' (62) 021·651-1533
$ Aphomar Co. Ltd. 127. South SOhrevardi Avenue Phone (98) 021-8752442
JI Gaya Motor Barat, Sunter II Jakarta 14330 Fax: (62) 021·651-0472
P.O. Box 11365/1167. Tehran
KOREA (fl Canon Korea Consumer Imaging Inc. Canon Support Center Phone: (82) 02-2017-8600
ISRAEL @ Karat Israel Ltd. 50 Anilevitch St. Tel Aviv 67060 Phone: (972) 03·6888525
2F Samwhan Artnubeau III. 209 Nonhyun 2 Dong. Kangnam-gu. Seoul Fax: (82) 02·2017·8796
SAUDI ARABIA @ AIQuralshl Leisure Services P.O. Box 1796. Jeddah 21441 Phono: (966) 02-69707791
MALAYSIA (fl Canon Marketing (Malaysia) Sdn. Bhd. Phone: (60) 03-7845-0055
Fax: (60) 03-7844-6044 6970652
Block D. Peremba Square. Saujana Resort, Section U2, 40150 Shah Alam.
SOUTH AFRICA @ Canon South Africa. P.O. Box 1782 Halfway House 1685 (27) 011-2667162
Selangor Darul Ehsan Malaysia
Gl Canon Marketing (Philippines) Inc. Phone (63) 02·812-6047 Johannesburg
Marvin Plaza Building. 2153 Don Chino Roces Ave Makati City. Motro Manila Fax (63) 02·812-0067 .ill-Wi ; ; M4 j.lo";; !,,;I'I
"jM=f.i¢jf.
SINGAPORE ill Canon Singapore Pte. Ltd. Phone (65) 6799-8888
(i) CANON AUSTRALIA PTY. LTD. Phone 13·13·83'
1 HaroourFront Avenue 1104-01 Keppel Bay Tower Singapore 098632 Fax' (65) 6799-8882 REGIONAL
HEADOUARTERS 'WithinAustraliaonly
® Rainbow Photo & Image Equipment Co. Ltd. Phone' (886) 02-2537-1172
(61) 02-9805-2555
No. 20 Chiling Road. Taipei 10424. Taiwan Fax (886) 02·2571·7171
(i) Canon Marketing (Thailand) Co.Ltd Phone (66) 02-344-9999 'For service center location, please contact the phone number above (61) 02-9888-3314
10th FloOI, Bangkok City Tower. 179/34-45 South Sathorn Road, Bangkok 10120 Fax: (66) 02-344-9910
@ Canon New Zealand Ltd. Phone (64) 09-489·0470
IIPjii:ii...i '.ji:iO.... jM·'M§I·ng. ijIlop; • , "MIMI" un 1,,1 Akoranga Business Park. Akoranga Drive Northcote. AucklatlCf. New Zealand
REGIONAL CANON U.S.A.• INC. Phone' 1-800·828-4040
HEADQUARTERS 'WithinUSonly
'Service facilities listed below are not 'International warranty Members·
'For service center locatioo, please visit our websile or conlact the phone number above.
They do not accept any warranty repair but may assist you when the repair charge is acceplable
C",'¢p.j". .moPO i i lMi" ul*,
Interhouse Company (673) 02·65300t
REGIONAL CANON CANADA INC., Phone: 1·800·828·4040 ASIA o
'Within Canada only BRUNEI NO.5 & 6. Bunut Jaya Complex, Simpang 574.
HEADQUARTERS
"For service center location, please visit our website or contact the phone number above Km 7 1/4, Jalan Tutong, Bandar Seri Begawan 2690. Brunei Darussalam
o Royal Cambodia Co.• Ltd Phone (855) 023·4264 14
C!I:mi-"'.:4i.llil;'·VI:::J·U", ",fojj' i • 14iiU ,..mIMu&W4i1; 1,,1 6lh Floor. Royal Group Building, 246 Preah Monivong Boulevard. Phnom Penh ,", (855) 023-426014
o Cenon(China)Co., Ltd. Phone' (86)010-9517·7178
REGIONAL CANON LATIN AMERICA, INC. Phone: 1-305·260·7400
HEADQUARTERS (Exeept Mexleo) 15F Jinbao Building No. 89 Jinbao Streel. Dongcheng District, Seiling t 00005. China
o Canon India pte. Ltd. Phono: (91)-012-45160000
'For service center localion. please visit our websile or contacl the phone number above.
2nd Floor. Tower A & B Cyber Greens. DLF Phase III Gurgaon-122 002. Haryana. India Fax: (91)·012·45160011
1§1:Jt!. :U!;pn i i I;m u;; liili.ll MYANMAR o Aecel International Co.• Ltd. Phone (95) 01-202-092
Level 6. FJV Commercial Centre. 422-426 Strand Road. Botataung. Township. Yangon Fax: (95) 01-202-079
REGIONAL CANON MEXICANA. S.DE R.L. DE C.V. Phone 01-800·710-7168'
PAKISTAN o Global Systems Phone (92) 021·438·9581
HEADQUARTERS Manuel Avila Camacho No, 138. PB Y pisos 15,16 Y 17 Col. Lomas de
ChapuTlepec Delegacion Migual Hidalgo. C.P. 11000 Mexico. D.F
'Within Mexico only
(52) 052-494·905
39-C/l, Block-6. P.E.C.H.S Off: Shahrah·e- Faisal, behind Jason Trade Centre. Karachi 75400 ,", (92) 021·438·9589
SRI LANKA • Homebase{Pvt.)Llmlted Phone (94) 01-12437797
"For service center localion. please contact the phone number above or send an e-mail to'
canonmx_soporte@cusa, canon. com
Fax' (52) 052-494·944
No.85 Braybrooke Place, Colombo 02. Sri Lanka ,", (94) 01-12448980
o Prlmax International Inc. Phone (977) 01-422·4079
C§liI'j ii!=t!,jjml!::W:B"iO·'iloU" "'!'#ih ; i lMiu.,,;Yiji.l:ma:mJ 31d Floor. Maitry Bhavan. New Road. Kathmandu. Nepal ,", (977) 01-422·9358
INDONESIA o PT Oatascrip Phone (62)021-424·4204
REGIONAL CANON EUROPA N. V Phone (31) 020·545-8545
JI Angkasa no 18 BD,Jakarta, Indonesia (62)021·424·7017
HEADQUARTERS P.O. Box 2262. Bovenkerkerweg 59-611180 EG Amstelveen, The Netherlands
'For general Inquiry only. For repair. please contact one 01 service center listed below
Fax (31) 020·545-8211
'"'
EUROPEfMIDDLEEAST/AFRICA - - - - - - - - - - - - - - - - - - - - - - - - - - - -
'Within Local oniy for non-Country 8. Area Code No
CIS • Canon Representative Office Kosmodamianskaya nab. 52. Building 3. Phone (7) 095-258600
Phone 0810-081009 5th Floor 113054 Moscow
AUSTRIA (i) Canon Ges.m.b.H htlp:I/www.canon.at
HUNGARY 'CameraKft Somogy 1. Bela u, 10. 1085 Budapest Phone: (36) 01·2668085
BELGIUM $ Canon Belgium N.V. 1 S.A. http://www.canon.be Phone 070-300·012
MALTA • P.Cutajar http://www.pcutajar.com.mt Phone (356) 448466
CANARY ISLANDS (i) Chellsons S.A. Islands 57, La Naval-Las Patmas Phone (34) 28-470008
KUWAIT o Naser Mohammed, Al Sayer Comm.Co. P.O. Box 974 Safat 13008 Phone (965) 2-44810315
ffi Chellsons S.A. 23. Imeldo Saris·Sta Cruz de Tenerife Phone (34) 28-470008
OMAN o GENETCO P.O. Box 3139. Ruwi 112 Phone (968) 706153
DENMARK @ Canon Denmark http://www.canon.dk Phone' 70·2055·15
UA_ o Khoory Electronics P.O.Box 284 DUbai Phone (971) 04·3534168
FINLAND $ Canon Oy http://www.canon.fi Phone 020-366-466
LEBANON o image System sal 460 CorniChe AI·Nahr. Beilul Phone (961) 01 ·562-000
FRANCE (£I Canon France Regional Competence Center httpl/www.canon.fr Phone: 0825·002-923
ESTONIA • AS KTK Overall htlp:ffwww.canon.ee Phone: (372) 630-0530
GERMANY $ Canon Germany Regional Competence Center http://www.canon.de Phone: 0180·500-6022
LATVIA o Canon North-East Oy http://www.canon.lv Phone: (371) 720·4444
GREECE EEl Intersys SA http://www.intersys.gr Phone (30) 0210-955-4000
LITHUANIA o Canon North-East Oy http://www.canon.lt Phone (370) 8700·555·78
ICELAND @ Beeo ehl Langholtsvegur 84, 104 Reykjavik Phone' (354) 533-3411
IRELAND @ Canon Ireland Ltd. http://www.canon.ie Phone: (353) 01690-200-563
ITALY ® Canon Italy Regional Competence Center httpJ!wwwcanon.i1 Phone: 848·600-519
LUXEMBOURG Gl Canon Luxembourg S.A. http://wwwcanon.lu Phone: 27·302-054
THE NETHERLANDS $ Canon Nederland N.V htlp:/lwww.canon.nl Phone 0900·202·2915
NORWAY ® Canon Norge AlS htlp:ffwww.canon.no Phone 226-29321
Complete this card at time of sale. A remplir au moment de I'achat L1ene esta tarjeta en el momento de la venta.
CUSTOMER
D D D D ~
CliENTE
NAME ADDRESS
Nom Adresse
D D D D NOMBRE
CITY/STATE
DIRECCION
ZIP PHONE
i~t~~~~o
Ville/Province Code postal
CIUDAD/ESTADO C6DIGO POSTAL
CITY
VILLE
CIUDAD
THIS WARRANTY CARD AND YOUR BILL OF SALE MUST BE
PRESENTED FOR WARRANTY SERVICE DEALER'S NAME & ADDRESS
MARCHAND NOM & ADRESSE
POSTAL CODE CETTE CARTE DE GARANTIE ET VOTRE PREUVE D·ACHAT DOIVENT NOMBRE Y DIRECCION DEL DISTRIBUIDOR
PROVINCE CODE POSTAL ~TRE PRESENTES POUR RECEVOIR LE SERVICE SOUS GARANTIE.
PROVINCIA C6DIGO POSTAL
PRESENTE ESTA TARJETA DE GARANTIA Y LA BOLETA DE COMPRA
PARA PODER RECIBIR EL SERVICIO DE GARANTIA. l- _
:f~r:i:;~~~t:~:a:ri:~=:decompl8menIS,delOUmilures,
(d) Malfunction resulting from the use of accessories, attachments, product supplies, parts or devk:es (including, without limitation, batteries, film, lenses, flash attachments and other
""",,,,,,,,,') with Itus canon photographic equipment that do not cooform 10 Canon specifications. (d) depi8cesoudedisposltils(vcompris,sansloutaloiss'yllmiler,lesplles, lespellicules, les
(a) Damage resulting during shipment. (Claim must be presented and examined by the shipper.) lenliltes, las lampes-(lclairs el autras accessoires) qui sont non conformes aux sp&cifications canon el qui soot utilises avec eet 8quipemenl de photographie canon:
(e) dommages subis en cours de transport (Toute reclamation dolt Atre presentee el examinee par Ie transponeur.)
Equipment covered by this warranty may be repaired by Canon International Warranty Members located outside the United States, canada, Australia, the United Kingdom. New Zealand,
Mexico and Japan, WITHOUT CHARGE, eXoeplfor insurance, transportation and handling charges. (Worldwide list 01 canon International Warranty Members included with equipment.) L'equlpement sous garanIie paul Atre repare SANS FRAIS par les membres du reseau moodial de foumisseurs de service sous garaolie de Canon qul ont una place d'affaires a l'aX1er1eur des
CANON COMPANY EXCLUDES AlL REPRESENTATIONS, WARRANTIES, CONDITIONS OR LIABILITIES (WHETHER EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND ;~~-~~~t::lt~~'li~el'~sS~~s~~:=~U~la~~o;:,e~~=rsn:'::::~s~~;,::'~nle=~:c:.e~'~Wdevraassumerles'raisd'assurance,detransport
FITNESS FOR A PARTICULAR PURPOSE) IN RELATION TO THE EOUIPMENT, EXCEPT THOSE WHICH ARE SET FORTH ABOVE AND/OR EXCEPT TO THE EXTENT THAT ANY LA SOCIETE:: CANON DE::CLARE QU'IL N'EXISTE, A L'EGARD DE CET eQUIPEMENT, AUCUNE AUTRE DE::CLARATION, GAAANTIE, CONOITION au OBLIGATION (EXPRESSE au
SUCH EXCLUSION WOULD CONTRAVENE ANY STATUTE OR CAUSE THIS TERM TO BE VOID. TACITE, Y COMPRtS TOUTE GARANTIE DE OUALITE MARCHANDE OU DE CONVENANCE A UN USAGE PARTICULIER) QUE LA GARANTIE E::NONCEE CI·DESSUS, A MaiNS
EXCEPT TO THE EXTENT THAT ANY SUCH EXCLUSION WOULD CONTRAVENE ANY STATUTE OR CAUSE THIS TERM TO BE VOID, CANON COMPANY EXCLUDES ALL LIABILITY OU'UNE TELLE CLAUSE D'EXCLUSION N'ENFREGNE TOUTE LOI APPLICABLE au
NE RENDE LA PRE::SENTE MODALITE:: NULLE.
TO THE PURCHASER IN RESPECT OF ANY CLAIM (WHETHER CONTRACTUAL, TORTIOUS, STATUTORY OR OTHERWISE) FOR ANY GENERAL, SPECIAL, INCIDENTAL OR A MaiNS OU'UNE TELLE CLAUSE D'EXCLUSION N'ENFREIGNE TooTE LOI APPLICABLE OU NE RENDE LA PRE::SENTE MODALlTE:: NULLE, LA SOCIETE:: CANON N'ASSUME
CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE (INCLUDING, WITHOUT LIMITATION, ANY LOSS OF FILM) IN RELATION TO THE EQUIPMENT OR ANY SERVICES AUCUNE RESPONSABILlTE:: A L'E::GARD DE TooTE RECLAMATION (DE NATURE CONTRACTUELLE, DE::LlCTUELLE, LE::GALE au
AUTRE) FONDEE SUR TOUTE PERTE (Y COMPRIS,
SUPPLIED BY CANON COMPANY IN RELATION TO THE EQUIPMENT. THIS WARRANTY SHAll NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS SANS TOUTEFOIS SY LIMITER, TOUTE PERTE DE PELLICULE), TOUS OOMMAGES, TOUT COUT OU TOU:? FRAIS DE NATURE GE::NE::RALE, SPE::CIALE, ACCESSOIRE OU
EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT INDIRECTE TOUCHANT L'eQU1PEMENT OU SUR TOUT SERVICE DISPENSE:: PAR LA SOCIE::TE:: CANON A L'E::GARD DE L'E::QUIPEMENT. LA PRESENTE GARANTIE NE
This warranty gives you specific legal rights, and you may also have other righls whtch vary h'om state to state, province 10 province and country 10 country S'APPLIQUERA AAUCUNE AUTRE PERSONNE QUE L'ACHETEUR INITIAL DE CET E::OUIPEMENT OU LA PERSQNNE OUI L'A RECU EN CADEAU
KEEP THIS WARRANTY CARD. IT IS YOUR PERMANENT RECORD OF WARRANTY. IF LOST IT Will NOT BE RE-ISSUED Lapresentegarantlevousconferadesdroilspartlculierseovertudefaloi,etUsepeutquevousavezd'autresdroitsQUivarientselool'etat,laprovinceOl:llepays.
'Limited Warranty means that the contents of thiS warraoty ara limited to the above·mentlooed tarms and conditions. VEUILlEZ CONSERVER LA PRE::SENTE CARTE DE GAAANTIE. ELLE CONSTITUE UNE PREUVE PERMANENTE DE LA GARANTIE APPLICABlE A VOTRE EQUIPEMENT ET NE SERA
PAS RE::EMISE EN CAS DE PERTE
'LapritsenlegaranlleestquallfleedelimiteecarsonoontenuestrestreintauxmodaJitesetcondilIoosd&critesd-dessus
r:,ta~::sO:J:':~=~~~os:c:~=~e:=::=so~~~so~~::~:"=n::,o:~~:=:delunclooamienIO.
(b) Defectosdelequlporesultantedep&rdidasdeelectr61iloodedai\oscausadosporelmismo.
(c) Delecto de malerial 0 de mano de obra cuando eI delecto sea resultado de modilicad6n 0 reparad6n reaUzada por personal distinto de los miembros de Ia garantla intemacional Canon u
otroscentrosdeservlcioautorizadosdislribuldosportodoelmundo.
(If) Failo defuncionamlento resultanla de Ia utiWlaCl6o, junto con este equipo lotogoUIcoCanon, deaccesorlos, piezas de sujeci6n, consumiblesdel producto, repuestos 0 d4sp0sit/vos
(lOCluyendo,slnlimitaci6n, pilas,pellculaS,objebVoS,acx:esoriosdellashyotros accesorlos) que no cumplan con las especificaclones de caoon.
(e) Daflos provocados durante el transporte. (EI redamO debe ser praS8ntado a V axamioaeto por Ia empress de transporte).
~~~C:rt~::=n:r::~~~W~~~A~~~C:O~~r:=~:=~~~~=.'t~~'::a~
~~~~~na:'I::~~a~~~j~~
del mundo que acompafla al eqwpo).
CANON COMPANY EXCLUYE TOOAS LAS REPRESENTACIONES, GARANTIAS, CONDICIONES U OBUGACIONES (SEA EXPRESA 0 IMPLICITA, INCLUYENOO COMERCIABILIDAD E
IDONEIDAD PARA UN PRQPOSITO PARTICULAR) RELACIONADAS CON EL EOUIPO, EXCEPTO LO EXPRESAMENTE ESTABLECIDO EN EL TEXTO PRECEDENTE YIO EXCEPTO
HASTA EL GRADO EN QUE AlGUNA EXCLUSI6N PUEDA INFRINGIR ALGUN ESTATUTO 0 CAUSAR LA ANULACICN DE ESTOS TE::RMINOS Canon Australia Ply. Ltd. 1 Thomas Holt Drive, North Ayde, Sydney N.S.W.2113, Auatralia
EXCEPTO HASTA EL GRADO EN QUE ALGUNA EXCLUSION PUEDA INFRINGIR ALGUN ESTATUTO 0 CAUSAR LA ANULACt6N DE ESTOS TE::RMINOS, CANON COMPANY NO Canon Canada, Inc. 6390 Oixie Road, Mlssissaoga, Ontario, L5T lP7 Canada
~E~L~:~?~~~A5C~:g:~~~~~~~~I~t,~~,~~~~r~~O~~~~E~~,!~~~E~~~~6's~~~~~~g~~~~~~~~~~~~Ati~I~~~~~~~I~~~D~6A~T~:
Canon New Zealand Ltd. Akoranga Business Park, ~oranga Drive. Northcote. Auckland, New Zealand
canon UK RCC. Unitl30 Centeonial Park Elstree Hili South, Borehamwood Etstree, Hefts, WOO 3SE, United Kingdom
PEUCULA) .RELACIONADOS CON EL EOUIPO 0 CUALESOUIER SERVICIOS SUMINISTRADOS POR CANON COMPANY EN RELACICN CON EL EOUIPO. ESTA GAAANTIA SE Canon U.S.A" loe. One Canon Plaza Lake success, NY 11042 U.S.A
CONCEDE UNICAMENTE PARA EL COMPRAOQR ORIGINAL DE ESTE EQUIPO 0 PARA OUIEN FUERA ADOUIRlDO COMO REGALO. Canon Mexicana S.DE R.LDE C.V. 8M:!. Manuel Avila camacho No. 138 Col. Lomas de Chapullepec C.P. 11000 MexIco D.F., MEXICO
Canon Latin America, Inc. Miami 703 Waterlord Way Suite 400, Miami, FL 33126 U.S.A
~t~fo'r~lST~~~~~:~=I~~~I~~,rA~=
~ R~~~~~~8':"~-rt~Nb~~~~~~~~~AaE~~deD~~~~~ncla,
o depals a pals Canon8aJesCo.Japan2-16-6,Kohnan,Mlnato-ku,Tokyol08-8011,Japan
"Garaotla limitada significa que eI conleoido de esta garantla se encuentra limilado a loS lermil'105 V condiciones mencionados m4s arriba.