Professional Documents
Culture Documents
Elephant Lifting Catalog v48
Elephant Lifting Catalog v48
Elephant Lifting Products introduces the worlds highest quality manufactured manual
chain hoists, lever hoists, and electric chain hoists that are required in todays industry.
Elephant Chain Block Co. Ltd. is family owned and operated, manufacturing lifting
equipment in Japan since 1936. The Elephant hoists are known globally for their
superior design, advanced safety features, and constant reliability. The manual chain
hoists, lever hoists, and electric chain hoists are furnished with our proprietary load
chain. The load chain is manufactured within our factory in Osaka, Japan and adheres
to the strict DIN 5684 standards. This special grade 105 heat treated high tensile
strength load chain (105 kgf / mm2) exceeds ISO V grade chain.
To complement our product line we are introducing two additional lines of lifting
equipment: ATS Pneumatic chain hoists and Grippa lifting equipment. ATS and Grippa
are both family owned & operated. They are also manufactured within ISO facilities
in South Africa. The ATS Pneumatic hoists range from 1/4t industrial type units to
specialized 150t BOP handling systems. We can offer specially engineered air chain
hoists for applications that demand so. The Grippa beam trolleys are a solid carbon
steel design, offering longevity in industrial environments. The Grippa beam clamps
are robust in design, engineered to accommodate large girder sizes. Both the Grippa
trolleys and beam clamps can be offered with 100% stainless steel side plates, stainless
steel components, and solid bronze or solid stainless wheels. These special features
are offered for corrosive and spark resistant environments. Elephant Lifting Products
also offers a variety of lifting clamps to accommodate various rigging applications.
Elephant Lifting Products, LLC is proud to be family owned and operated. Our
product line is promoted and serviced by honorable distributors that are dedicated to
the shipyard, petrochemical, power, pulp / paper, construction, mining, offshore, and
automotive industries. Elephant products will give our customers the assurance of
satisfaction, through performance, during and after each job. We serve you from our
home in Gonzales, Louisiana.
TABLE OF CONTENTS
-3-
made
in
Japan
K II O P
MANUAL
CHAIN HOIST
OVERLOAD
PROTECTION
-4www.elephantlifting.com
0.5t ~ 2t
A
3.1~5t
A
7.5t
A
10t
A
7.5t
A
10t
A
Load
Chain
Hand
Chain Net
Max
Max
Hand
Eort
to
Standard
Manufac- Headroom
Headroom
(
in
)
Headroom
(
in
)
Lug
Mount
to
GRIPPA
Lug
Mount
to
Elephant
LiC
Full
Working
Dia.
X
Pitch
No.
of
Dia.
X
Pitch
Weight
working
working
turer's
Test
(
in
)
LiC
(
C
)
BC
or
BCG
Trolley
P
or
G
Trolley
Load
load
(
lbs
) load
(
mt
)
Load
(
lbf
)
(
mm
)
Falls
(
mm
)
(
lbs
)
10
1100
0.5
10.83
NA
11.7
59.5
5 x 15
22
2200
1.0
10
11.81
12.5
12.6
69.5
6.3 x 19
27
150% x
1
3500
1.6
10
13.19
NA
14.5
91.5
7.1 x 21
35
Max.
working
4400
2.0
10
14.77
18
15.9
88.2
8 x 24
46
load
5 x 23.5
5500
2.5
10
16.14
NA
18
89.3
9 x 27
58
6800
3.1
10
20.87
23.3
20.5
104.7
7.1 x 21
53
2
11000
5.0
10
24.61
23.1
24.9
105.8
9 x 27
87
125% x Max.
16500
7.5
10
29.53
NA
28.6
115.7
9 x 27
3
154
working load
22000
10.0
10
30.52
NA
31.3
115.7
9 x 27
4
182
A
5.5
6.3
7.2
8.5
9.2
9.1
11.1
14.6
15.2
B
6.1
6.3
6.6
7.2
7.5
6.6
7.5
7.5
7.5
C
2.3
2.5
2.6
2.6
2.8
4.4
6.6
5.8
11.8
D
1.3
1.4
1.5
1.6
1.7
2.5
3.1
3.2
3.9
E
1.1
1.2
1.4
1.5
1.6
1.8
2.1
2.8
2.8
F
1.4
1.7
1.9
2.1
2.2
2.4
2.8
3.4
3.4
G
2.7
3.5
4.1
4.5
5
5.5
6.4
9
9
-5-
made
in
Japan
C-21
MANUAL
CHAIN
HOIST
-6www.elephantlifting.com
0.5t ~ 2t
E
3t ~ 5t
E
B
C D
Model
A
Max
working
load
(
lbs
)
Max
working
load
(
mt
)
1100
2200
3500
4400
6000
11000
A
0.5
1
1.5
2
3
5
C21-0.5
C21-1
C21-1.5
C21-2
C21-3
C21-5N
G
Standard
Li9
(
9
)
10
10
10
10
10
10 N
G
Grade 105
galvanized load chain, which
adheres to the strict
7.5t
10t
A
A
B
B standard
German
DIN 5684
Zinc plated hand chain
HeavyHand
duty
frame
Hand
Eort
Load
Chain
Net
Headroom
Chain
to
Li9
Full
Manufacturer's
Weight
lifting
capacity
ratio,
a
1
ton
unit
with
10 lift
(
iLightweight
n
)
Working
Dia.
X
Pitch
No.
of
Dia.
X
Test
Load
Dim.
A
(
lbs
)
Load
(
lbf
)less (
than
mm
) otherFalls
Pitch
hoists
(
in
)
weighs
20%
Japanese
10.9
57.3
4.3 x 12
15
12.2
Long lasting
friction
discs
70.6
5.6 x 17
22
1
72.8wear resistant
6.5 x 19
28
150% Max. working 13.4
Extremely
4.5 x 23.0
load
15
72.8C
7.5 x 21
C a 37
18.9
Load chain,
and braking
parts have
safety factor of
83.8 hooks,
6.5 x 19
43
2
21.9
74.90.5t ~7.5 x 21
3 a safety factor75of 5+ times.
4+ times.
1t units have
D
I
G powder coatDfinish
G
Durable
B
C D
Max
working
load
(
lbs
)
Max
working
load
(
mt
)
Standard
Li9
(
9
)
1100
2200
3500
4400
6000
11000
0.5
1
1.5
2
3
5
10
10
10
10
10
10
Hand Eort
Manufacturer's
Test
Load
Headroom
to
Li9
Full
(
in
)
Working
Dim.
A
10.9
12.2
13.4
15
18.9
21.9
Load
(
lbf
)
57.3
70.6
72.8
72.8
83.8
74.9
Hand
Net
Chain
Weight
Dia.
X
Pitch
No.
of
Dia.
X
(
lbs
)
(
mm
)
Falls
Pitch
(
in
)
4.3 x 12
15
5.6 x 17
22
1
6.5 x 19
28
4.5 x 23.0
7.5 x 21
37
6.5 x 19
43
2
7.5 x 21
75
3
Load
Chain
Capacity
(
lbs
)
C21-0.5
C21-1
C21-1.5
C21-2
C21-3
C21-5
10.9
12.2
13.4
15
18.9
21.9
5.2
5.7
6
6.5
9
6.5
2.2
2.4
2.7
3
2.7
3
3
3.3
3.3
3.5
3.3
3.5
4.8
5.8
6.6
7.6
8.2
11.7
1.2
1.4
1.4
1.7
1.7
2.3
1.4
1.7
1.7
2.1
2.1
2.8
0.63
0.87
1
1.2
1.4
1.8
0.51
0.63
0.83
0.87
1.1
1.3
0.95
1.2
1.2
1.4
1.4
1.8
-7-
made
in
Japan
HOISTMAN
MINI
CHAIN
HOIST
-8www.elephantlifting.com
HM-15
HM-25
Capacity (lbs)
330
550
Capacity (kg)
150
250
496
826
Li> ( > )
10
Headroom (in)
8.6
Hand Eort / Full Working
368
Load (lbf)
Dia. X Pitch (mm)
3
of Load Chain
Grade of Load Chain
+V
Dia. X Pitch (mm)
2.5 x 14
of Hand Chain
10
8.6
432
3
+V
2.5 x 14
8.5
8.5
Weight (lbs)
-9-
made
in
Japan
POWER
HOISTMAN
CORDLESS DRILL
DRIVEN AND
HAND CRANK
HOIST
- 10 www.elephantlifting.com
Powershaft &
Cordless
Drill Driver
Direct Connection
to Cordless
Driver Drill
Powershaft
& Handle
Direct Connect
with Handle
Specifications - POWER HOISTMAN CORDLESS DRILL DRIVEN & HAND CRANK HOIST
Model
Kind
of
Cordless
Driver
Drill
EHMF-12.5
EHMF-20
EHMF-38
12V
12V
15.6V
With
Powersha6
Direct
ConnecCon
Standard
Length
of
Load
Chain
Weight
w/
Test
Load
Headroom
Dia
x
Pitch
Power
Power
Rated
Load
Li6ing
Speed
Rated
Load
Li6ing
Speed
Li6
(lbs)
(in)
(mm)
Sha6
(lbs)
(6)
Sha6
(6)
(lbs)
(6
/
min)
(lbs)
(6
/
min)
275
400
838
EHMF 12.5
Rated load 275 lbs.
10
6
5.5
275
400
838
10
6
5.5
EHMF 20
Rated load 400
10
10
10
125%
125%
125%
8.7
8.7
10.8
5
5
5
3.1 x 9.3
3.1 x 9.3
4.3 x 12
9
9
12
EHMF 38
Rated load 838 lbs.
lbs.
- 11 -
made
in
Japan
SUPER
10 0
LARGE CAPACITY
CHAIN HOIST
- 12 www.elephantlifting.com
The tough reinforced gear case has four ribs and four
knock pins, providing accurate gear centering and high
mechanical efficiency
Rolled edge hand wheel cover
Heavy duty electrostatic powder coating
Long life friction discs
H100-16
H100-20 ~ H100-50
H100-80
Load Chain
Specifications
100 LARGE CAPACITY CHAIN HOIST (16-80
Max.
- SUPER
Max.
Hand
ton)
Eort
to
li+
Model
Model
10
10 10
10 10
10
10
10
10
10
10
10
38.78
38.78
44.09
44.09
50.79
50.79
57.09
57.09
59.84
59.84
126.00
126.00
(lbf)
88 x 1
88 x 179 x 2
79 x 2
108 x 2
108 x 2
104 x 2
104 x 2
110 x 2
110 x 2
104 x 4
104 x 4
No. Falls
(mm)
9 x 27
9 x 279 x 27
9 x 279 x 27
9 x 27
9 x 27
9 x 27
9 x 27
9 x 27
9 x 27
9 x 27
6
8
10
14
16
28
Hand Chain
6
8
10
14
16
28
+V
+V
+V
+V
+V
+V
+V
5 x 23.5
326
+V5 x 23.5 5 x 23.5
5 x 23.5
463
+V
5 x 23.5
5 x 23.5
650
+V
5 x 23.5
5 x 23.5
1025
+V
5 x 23.5
5 x 23.5
1213
+V5 x 23.5 5 x 23.5
5512
Net
Weight
(lbs
)
326
463
650
1025
1213
5512
DIMENSIONS (In.) - SUPER 100 LARGE CAPACITY CHAIN HOIST (16-80 ton)
Model
Model
in.
A
A
mmin.
BB
C C
D D
H100-16
H100-16
H100-20
H100-20
H100-32
H100-32
H100-40
H100-40
H100-50
H100-50
H100-80
H100-80
38.78
38.78
44.09
44.09
50.79
50.79
57.09
57.09
59.84
59.84
126.00
126.00
9.25
9.25
14.21
14.21
15.79
15.79
19.41
19.41
21.3
21.3
28.7
28.7
3.54
3.54
7.11
7.11
7.89
7.89
9.79.7
10.65
10.65
15.7
15.7
5.715.71
7.117.11
7.897.89
9.7 9.7
10.65
10.65
12.212.2
19.37
19.37
28.39
28.39
28.39
28.39
28.78
28.78
28.78
28.78
55.10
55.10
3.78 3.78
3.78 3.78
4.57 4.57
3.70 3.70
4.06 4.06
7.00 7.00
4.02
4.41
5
5.75
6.54
9.4
4.02
4.41
5
5.75
6.54
9.4
3.11
3.35
4.45
5.31
6.14
9.8
3.11 2.44
3.35 2.76
4.45 3.43
5.31 4.92
6.14 5.39
9.8 8.3
2.443.19
2.763.23
3.434.09
4.924.25
5.394.72
8.3 7.0
N
3.19
3.23
4.09
4.25
4.72
7.0
- 13 -
made
in
Japan
SHG
TROLLEY HOIST
0.5t~20t
SHGA
TROLLEY HOIST
1t~10t
- 14 www.elephantlifting.com
SHG
SHGA
Model
SHG-0.5
SHG-1
SHG-1.6
SHG-2
SHG-3.1
SHG-5
SHG-10
SHG-10B
SHG-20
SHGA-1
SHGA-2
SHGA-3.1
SHGA-5
SHGA-10
0.5
1
1.6
2
3.15
5
10
10
20
1
2
3.1
5
10
Test
Load
(metric
ton)
Dia.
of
Load
Hand
Eort
Hand
Eort
to
I
Beam
Width
Dim.
Chain
(mm)
Headroom
Dim.
H
(in)
to
LiC
(lbf)
W
(in)
Traverse
(lbf)
x
Falls
Standard
LiC
(C)
750kg
1.5
2.4
3
4.8
7.5
12.5
12.5
25
1.25
2.5
4
6.3
12.5
8
8
8
10
10
10
10
10
10
10
10
10
10
10
5x4
5x4
5x4
5x4
7.1x4
7.1x4
9x4
9X4
9x8
5.0x2
6.3x2
7.1x2
9.0x2
9.0x4
55
62
84
82
84
84
88
88
110
62
82
84
84
88
11
11
9
12
18
25
60
60
88
11
12
18
25
60
5.15
6.10
7.08
7.08
7.91
8.85
10.23
11.40
15.75
4.50
5.70
6.30
7.70
9.90
Manufactured to
SpecicaMon
2.9 to 4.9
3.9 to 5.9
4.9 to 6.8
4.9 to 6.8
5.9 to 7.4
Dimensions
(in) (In.) - SHG & SHGA LOW PROFILE TROLLEY HOIST
DIMENSIONS
Model
Unit
Weight
(lbs)
with
10'
Li9
11.0
11.0
11.0
11.0
13.7
13.7
16.5
19.6
7.9
9.8
11.0
13.8
15.7
7.0
7.0
7.1
7.1
8.9
8.9
11.0
13.1
5.9
7.9
9.8
9.8
11.8
19.6
19.6
19.6
19.6
20.3
21.5
22.6
24.2
E+F
E+F
E+F
E+F
E+F
11.4
11.4
11.4
11.4
11.6
12.0
12.7
13.5
8.7 ~ 9.7
9.02~10.2
10.1~11.1
12.75~13.75
13.5~14.7
8.2
8.2
8.2
8.2
8.7
9.4
9.9
10.7
7.2~8.1
8.0~9.0
9.0~10.1
10.9~11.9
10.7~11.5
1.6
1.9
2.6
2.6
2.4
2.8
3.3
4.4
1.7
2.1
2.4
2.8
3.3
7.2
3.9
5.4
5.4
6.5
6.1
9.0
12.1
12.6
15.7
17.7
22.4
24.0
0.5
0.7
1.0
1.0
1.2
1.4
1.8
2.7
1.3~3.3
1.8~3.8
2.6~4.6
1.8~3.8
2.0~3.5
3.2
3.2
3.9
3.9
4.5
4.9
6.2
7.8
3.1
3.9
4.5
4.9
6.2
132
135
154
154
331
551
772
1874
135
154
331
551
771
520
650
200
250
150
200
26.8
SHG-0.5
26.8
SHG-1
26.8
SHG-1.6
26.8
SHG-2
30.5
SHG-3.1
32.7
SHG-5
36.9
SHG-10
45.2
SHG-20
20.5
SHGA-1
25.6
SHGA-2
27.6
SHGA-3.1
33.9
SHGA-5
37.6
SHGA-10
* Contact the Factory
mm
Model
SHG-1
SHG-2
320
400
80
98
- 15 -
made
in
SHG SERIES
Spark
Resistant
LOW PROFILE
Series TROLLEY HOIST
Japan
H100
SPARK RESISTANT
SERIES
- 16 www.elephantlifting.com
made
in
SHG SERIES
Corrosion
LOW PROFILE
Resistant
TROLLEYHOISTS
HOIST
Japan
CORROSION
RESISTANT
HAND CHAIN
HOIST
- 17 -
made
in
Japan
ELEPHANT
PUSH &
GEARED
TYPE TROLLEYS
- 18 www.elephantlifting.com
Model
P-0.5
P-1
P-1.6
P-2
P-3.1
P-5
P-8
P-10
P-15
P-20
A
7.5
8.7
10.2
10.2
11.3
12.9
17
17
22.8
22.8
B
5
5
5.6
5.6
5.7
6.5
6.5
7
9
9
C
2.9
2.9
3.7
3.7
3.8
4.9
7
7
9
9
D
6.1
6.7
8.1
8.1
9.4
11.4
13
13
18.2
18.2
E
2.7
3.1
3.8
3.8
4.5
4.9
6.2
6.2
7.7
7.7
Capacity
(lbs)
1102
2204
3527
4409
6944
11023
17636
22046
33069
44092
F
3.9
4.5
5.3
5.3
5.9
6.6
8.6
8.6
11.6
11.6
I-beam
width
Min.
radius
Capacity
With
4
No
Collars
With
2
of
I-beam
(mt)
(in)
Collars
(in) Collars
(in)
(in)
0.5
1
1.6
2
3.15
5
8
10
15
20
2.95
2.95
3.94
3.94
3.94
4.92
5.91
5.91
6.89
6.89
G
2.95 - 3.94 - 4.92
2.95 - 3.94 - 4.92
3.94 - 4.92 - 5.91
3.94 - 4.92 - 5.91
3.94 - 4.92 - 5.91
4.92 - 5.91 - 6.89
5.91 - 6.89
5.91 - 6.89
6.89 - 7.48
6.89 - 7.48
3.94
3.94
4.92
4.92
4.92
5.91
6.89
6.89
7.48
7.48
H
4.2
4.4
5.9
5.9
7.1
8.7
9.6
9.6
10.7
10.7
Net
Weight
(lbs)
4.92
4.92
5.91
5.91
5.91
6.89
35.4
43.3
47.2
47.2
66.93
90.55
118.11
118.11
236.22
236.22
18
24
42
42
60
107
216
221
650
882
I
1.3
1.2
2
2.1
2.5
2.9
3.9
3.9
3.3
3.3
J
1.1
1.1
1.5
1.5
1.9
2.3
3.1
3.1
3.7
3.7
K
3.9
4
5.5
5.5
6.6
8.2
9.1
9.1
9.7
9.7
Model
G-0.5
G-1
G-1.6
G-2
G-3.1
G-5
G-8
G-10
G-15
G-20
G-30
Model
G-0.5
G-1
G-1.6
G-2
G-3.1
G-5
G-8
G-10
G-15
G-20
G-30
A
7.5
8.7
10.2
10.2
11.3
12.9
17
17
22.8
22.8
36.8
B
5
5
5.6
5.6
5.7
6.5
7.4
7.4
9
9
12
C
4.6
4.8
5.3
5.3
5.3
6.5
11.7
11.8
12.8
12.9
17.4
D
6.4
7.3
9.1
9.1
9.9
11.8
12.1
12.1
17.4
17.4
22.7
Capacity
(lbs)
Capacity
(mt)
1102
2204
3527
4409
6944
11023
17636
22046
33069
44092
66138
0.5
1
1.6
2
3.15
5
8
10
15
20
30
E
2.7
3.1
3.8
3.8
4.5
4.9
6.2
6.2
7.7
7.7
9.6
F
3.9
4.5
5.3
5.3
5.9
6.6
8.6
8.6
11.6
11.6
23.6
Diameter
X
Min.
radius
pitch
of
No
Collars
With
2
With
4
(in)
Collars
(in) Collars
(in) Hand
Chain
2.95
2.95
3.94
3.94
3.94
4.92
5.91
5.91
6.89
6.89
7.48
3.94
3.94
4.92
4.92
4.92
5.91
6.89
6.89
7.48
7.48
G
2.95 - 3.94 - 4.92
2.95 - 3.94 - 4.92
3.94 - 4.92 - 5.91
3.94 - 4.92 - 5.91
3.94 - 4.92 - 5.91
4.92 - 5.91 - 6.89
5.91 - 6.89
5.91 - 6.89
6.89 - 7.48
6.89 - 7.48
7.48
4.92
4.92
5.91
5.91
5.91
6.89
H
4.2
4.4
5.9
5.9
7.1
8.7
9.6
9.6
10.7
10.7
23.1
5 x 22.5
6 x 26.6
6 x 26.6
6 x 26.6
6 x 26.6
6 x 26.6
5 x 23.6
5 x 23.6
5 x 23.6
5 x 23.6
5 x 23.6
I
1.3
1.2
2
2.1
2.5
2.9
3.9
3.9
3.3
3.3
7.2
of
I-beam
(in)
New
Weight
(lbs)
35.4
43.3
47.2
47.2
66.93
90.55
118.11
118.11
236.22
236.22
472.44
27
35
54
55
74
123
236
258
695
926
1323
J
1.1
1.1
1.5
1.5
1.9
2.3
3.1
3.1
3.7
3.7
5.9
K
3.9
4
5.5
5.5
6.6
8.2
9.1
9.1
9.7
9.7
22.1
- 19 -
made
in
YA LEVER HOIST
Japan
YA
LEVER
HOIST
- 20 www.elephantlifting.com
YA LEVER HOIST
YA-50
Model
YA-50
YA-80
YA-100
YA-160
YA-320
YA-630
YA-900
YA-1200
F
1.4
1.4
1.7
1.7
2.1
2.8
3.4
3.35
G
0.51
0.59
0.63
0.83
1.1
1.3
1.88
1.87
H
7.0
10.6
10.6
12.2
12.2
12.2
12.2
12.2
- 21 -
made
in
Japan
- 22 www.elephantlifting.com
YIII-50
1100
500kg
5
10.4
YIII-80
1700
800kg
5
11.4
YIII-100
2200
1
5
12.2
YIII-160
3500
1.6
5
13.7
YIII-320
6900
3.15
5
16.5
YIII-630
13800
6.3
5
22.4
YIII-900
19800
9
5
27.8
75
5
1
+V
8
66
5.6
1
+V
14
82
5.6
1
+V
14.5
66
7.1
1
+V
21
82
9
1
+V
34
84
9x2
2
+V
58
86
9x3
3
+V
93
Model
YIII-50
YIII-80
YIII-100
YIII-160
YIII-320
A
1.04
2.07
2.07
2.5
3.3
B
3.3
3.9
3.9
4.1
4.4
C
3.3
4.8
4.8
5.6
7
D
10.4
11.4
12.2
13.8
16.5
E
0.9
0.9
1.06
1.5
1.4
F
1.4
1.4
1.69
1.7
2.08
G
0.6
0.59
0.7
0.83
1.1
H
11.2
10.6
10.6
15.2
15.6
* Specica=ons & Dimensions are Subject to Change Without No=ce
YIII-630
3.3
4.4
9.3
22.4
1.8
2.8
1.3
15.2
YIII-900
3.3
4.4
11.8
27.8
2.6
3.3
1.9
15.2
- 23 -
made
in
Japan
YII SERIES
MINI
LEVER HOIST
66
4
1
+V
5.5
- 24 www.elephantlifting.com
YII-50
1100
500kg
5
10.4
75
5
1
+V
8
0.82
1.00
2.75
3.26
2.36
3.34
9.25
10.43
0.74
.90
1.22
1.4
0.47
.60
6.1
11.2
made
in
Japan
UPSET WELDING
HOOKS
Model
Capacity (lbs)
Capacity (mt)
Standard LiT (T)
Headroom (in)
Hand Eort (lbf)
Diameter (mm)
Load Chain
Number of Falls
Grade of Chain
Weight (lbs)
YIIIS-160
3500
1.6
5
13.5
66
7.1
1
+V
21
YIIIS-320
7000
3.2
5
16.65
82
9
1
+V
34
- 25 -
made
in
Japan
ELECTRIC
CHAIN HOIST
SA TYPE
1 PHASE
1 SPEED
- 26 www.elephantlifting.com
FA
SA
E
B
Insulation Motor
class
Tough, Heavy-Duty
Tough,
FA heavy-duty
E motor.
Short time
15 minutes
(lowduty
speed)
30
25minutes
minutes
30 minutes (high speed)
electro-magnetic
DC brake
Reliable
FB
E
15 minutes (low speed)
durable load chain of our own manufacture
Highly
SA
B
25 minutes
Reliable Electro-Magnetic DC Brake
operability
Durable top and bottom hooks
Bottom
hook hook
with bearing
smoothly
swivelsswivels,
360 360.
Bottom
with bearing
smoothly
In
case
of
overloading,
it
gradually
elongates
without
hook
with highthe
safety
TopInand
thebottom
event of
an overload,
hookand
gradually
fracture.
operability
In
case ofstrengthened
overloading, itplastic
gradually
elongates without
Specially
bucket.
fracture.
Chain
Bucket Hard plastic
switch
Limit
Highly durable load chain manufactured in Japan Standard
Chain bucket
equipped with limit switch.
Limitmodel
switchisStandard
feature
Specially strengthened plastic bucket.
Highly durable load chain of our own manufacture
by Elephant
FA/FB/SA
+2 push
FA/FB/SA
+Geared/Plain
FA/FB/SA
+Electric trolley
FA/FB/SA
+Geared/Plain trolley
Electric
Manual
FA/FB
+Electric trolleyElectric
- 27 -
ook suspension
A
1t
250kg~0.5t
C
C
O
3t
1t w - 2t
1t
K
43
43
50
Minimum
Specifications
TYPE HOOK SUSPENSION
Lifting speed(m/min) - SA
distance
50Hz
60Hz
H(mm)
2.1
670
Net weight
7.0
Model
3.5
1.8
46(52)
SA-0.25
550
250kg
312.5 kg
SA-0.5
1100
0.5
0.625
SA-1W
2200
1
1.25
O 1.25
N 1
M 2200
L
SA-1S
14
19
84
26.5
SA-2
14 2.5
19 2
844400
26.5
19 3.75
25 3
1036600
31
SA-3
SA-5
11000
5
6.25
* Contact Factory For Addi@onal Informa@on
10
10
10
10
10
10
10
DIMENSIONs
(IN.)electric
- SA TYPE
HOOK SUSPENSION
Electric chain
block with
trolley
B
4.88
4.88
6.22
5.04
6.5
8.19
10.74
- 28 -
6.3 x 1
6.3 x 1
7.1 x 2
7.1 x 1
7.1 x 2
7.1 x 3
7.1 x 5
0.61
0.61
0.61
1.21
1.21
1.21
1.21
50Hz
23
11.5
6
9
4
3
1.7
60Hz
27.5
13.5
7
10
5
3.3
2
C
8.82
8.82
8.82
9.4
9.4
9.4
9.4
D
12.24
12.24
12.97
5.04
6.5
16.8
19.2
K
1.69
1.69
1.97
1.96
2.56
2.36
2.76
L
1.04
1.04
1.22
1.22
1.5
1.7
1.85
M
3.31
3.31
4.06
3.86
5.33
6.5
6.69
www.elephantlifting.com
1t
8
8
8
8
8
8
8
W.L.L
(lbs)
W.L.L.
(mt)
A
F
550 E
250kg I
6.34
1100
0.5 G
6.34
2200
1
5
2200
1
6.7
B
C
4400A
2C
5.24
6600
3
5.82
11000
5
7.2
*
Contact
Factory
For
Addi>onal
Informa>on
5t
Min.
Distance
H
(in)
Net
Weight
21.85
21.85
26.38
23.2
29.33
33.07
38.2
95
95
102
136
152
191
248
N
0.75
0.75
0.98
0.98
1.38
1.93
2.08
O
0.55
0.55
0.75
0.75
1.02
1.26
1.4
1 t (SAM-1S)
Specifications - SAM TYPE (SINGLE SPEED) ELECTRIC CHAIN HOIST WITH ELECTRIC TROLLEY
Model
SAM-0.25
SAM-0.5
SAM-1
SAM-1S
250kg
0.5
1
1
10
10
10
10
Traversing
Motor
Output
(H.P.)
0.41
50Hz
32
32
32
32
60Hz
39
39
39
39
27.36 (23.62)
27.36 (23.62)
2.95 - 5.91
31.89 (27.76)
28.74(24.61)
DIMENSIONS (In.) - SAM TYPE (SINGLE SPEED) ELECTRIC CHAIN HOIST WITH ELECTRIC TROLLEY
W.L.L
(lbs) W.L.L.
(mt)
550
1100
2200
2200S
250kg
0.5
1
1
A
6.34
6.34
5
6.69
B
4.88
4.88
6.22
5.04
C
8.82
8.82
8.82
9.41
D
17.97
17.97
20.91
19.25
E
9.88
9.88
9.88
9.88
F
8.6
8.6
8.6
8.6
G
4.72
4.72
4.72
4.72
EMERGENCY
STOP BUTTON
I
9.69
9.69
9.69
9.69
J
4.49
4.49
4.49
4.49
K
1.69
1.69
1.97
1.97
L
1.04
1.04
1.22
1.22
M
3.31
3.31
4.06
4.06
N
0.75
0.75
0.98
0.98
43.31
43.31
43.31
43.31
O
0.55
0.55
0.75
0.75
Net
Weight
(lbs)
163
163
170
192
P
(Dia.
of
Wheel)
2.68
2.68
2.68
2.68
CABLE HANGER
Standard Feature On
Single Phase Units
I-Beam
Width
2.95
YTI-100
3.94
4.92
YTI-150
5.91
A
6.54
6.54
6.54
6.54
B
1.26
2.24
3.23
4.21
C
D
(Cable
Dia.)
0.59
0.39 - 0.87
0.59
0.39 - 0.87
0.98
0.39 - 0.87
0.98
0.39 - 0.87
- 29 -
made
in
Japan
ELECTRIC
CHAIN HOIST
FA TYPE
1 SPEED
3 PHASE DUAL VOLTAGE
FB TYPE
2 SPEED
- 30 www.elephantlifting.com
SA model
Features
1.Single phase class B insulation
Short time duty: 25 minutes
2.Thermal protector
Thermal protector senses the
abnormal rise of temperature for motor
and stops the motor automatically.
It prevents the motor from burning.
FEATURES
OF FA/FB/SA
FEATURES
OF FA/FB
FB
SA
hook
with highthe
safety
TopInand
thebottom
event of
an overload,
hookand
gradually
operability
elongates. This elongation serves as an indicator to the
Bottom hook with bearing smoothly swivels 360
endofuser,
making them
awareelongates
of the overload.
In case
overloading,
it gradually
without
fracture.
Chain Bucket Hard plastic
Reliable Electro-Magnetic
electro-magnetic DC
brake
Reliable
DC Brake
Chain
switch Standard feature
Limitbucket
Highly durable load chain of our own manufacture
Specially
strengthened plastic bucket.
Highly
durable
load
chain
manufactured
in
Japan
Limit switch
- 31 -
FA-0.5
FA-1
FA-2
FA-3
FA-5
FB-0.5
FB-1
FB-2
FB-3
FB-5
1100
2200
4400
6600
11000
1100
2200
4400
6600
11000
0.5
1
2
3
5
0.5
1
2
3
5
Standard
Push
BuIon
Cord
Length
(:)
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
W.L.L.
(mt)
0.5
1
2
3
5
A
6.34
6.69
5.24
5.83
7.2
B
4.88
5.04
6.5
8.19
10.74
C
8.82
9.41
9.41
9.41
9.4
Load
Chain
Dia.
Li:ing
Motor
Output
Li:ing
Spd.
(:/min)
(FB)
High:Low
speed
X
Number
of
(H.P.),
(FB)
High:Low
Falls
Speed
6.3 x 1
7.1 x1
7.1 x 2
7.1 x 3
7.1 x 5
6.3 x 1
7.1 x 1
7.1 x 2
7.1 x 3
7.1 x 5
D
12.46
13.74
15.22
16.81
19.2
1.22
2.18
2.18
2.18
2.18
1.22 : 0.34
2.18 : 0.54
2.18 : 0.54
2.18 : 0.54
2.18 : 0.54
K
1.69
1.97
2.56
2.36
2.76
L
1.04
1.22
1.5
1.69
1.85
50Hz
23
20
10
7
4.1
23 / 6
21 / 5
10 / 1.6
7 / 1.6
4.1
60Hz
27.5
24.5
12.5
8
4.8
27.5 / 7
24.6 / 6
12.5 / 3
8 / 2
4.8/1.2
M
3.31
4.09
5.33
6.5
6.7
Min.
Distance
H(in)
21.85
23.23
29.33
33.07
38.2
21.85
23.23
29.33
33.07
38.2
N
0.75
0.98
1.38
1.93
2.08
Net
Weight
(lbs)
95
123
141
183
246
97
126
143
185
246
O
0.55
0.75
1.02
1.26
1.38
CABLE HANGER
DIMENSIONS (In.) - CABLE HANGER
Model
I-Beam
Width
2.95
YTI-100
3.94
4.92
YTI-150
5.91
- 32 www.elephantlifting.com
A
6.54
6.54
6.54
6.54
B
1.26
2.24
3.23
4.21
C
D
(Cable
Dia.)
0.59
0.39 - 0.87
0.59
0.39 - 0.87
0.98
0.39 - 0.87
0.98
0.39 - 0.87
Specifications - FAM/FBM 1 SPEED & 2 SPEED HOIST, 1 & 2 SPEED MOTORIZED TROLLEY
Model
FAM-0.5
FAM-1
FAM-2
FAM-3
FAM-5
FBM-0.5
FBM-1
FBM-2
FBM-3
FBM-5
1100
2200
4400
6600
11000
1100
2200
4400
6600
11000
Standard
LiB
(B)
0.5
1
2
3
5
0.5
1
2
3
5
10
10
10
10
10
10
10
10
10
10
W.L.L.
(mt)
0.5
1
2
3
5
A
6.34
6.69
5.24
5.83
7.2
B
4.88
5.04
6.5
8.19
10.74
50Hz
60Hz
23
20
10
7
*
23 / 6
21 / 5
10 / 1.6
7 / 1.6
*
27.5
24.5
12.5
8
4.8
27.5 / 7
24.6 / 6
12.5 / 3
8 / 2
4.8 / 1.2
C
8.82
9.41
9.41
9.41
9.4
Traversing
Motor
Output
(H.P.)
0.54
1.02
0.54
1.02
*D
*E
*F
17.97 9.88 (10.94)
8.6
19.25 9.88 (10.94)
8.6
21.65 10.51 (11.57) 9.72
22.91 12.76 (15.75) 9.92
19.9
16.5
10.62
G
4.72
4.72
5.83
6.3
6.7
50Hz/60Hz
50Hz/60Hz
Min.
Distance
Traversing
Trolley
Min.
H
(in)
I-beam
Radius
(in)
Hook
:
Lug
Width
27.36 (23.62)
28.74 (24.61)
65 / 78
32 /39
35.83 (29.53)
MAS type
MAF type
40.16 (33.86)
38.8
27.36 (23.62)
28.74 (24.61)
65 / 78
32 /20
35.83 (29.53)
MAS type
MAF type
40.16 (33.86)
38.8
2.95-5.91
I
9.69
9.69
12.76
12.44
13.2
N
0.75
0.98
1.38
1.93
2.08
*J
4.49
4.49
5.39
7.13
6.77
K
1.69
1.97
2.56
2.36
2.76
L
1.04
1.22
1.5
1.69
1.77
M
3.31
4.06
5.33
6.5
6.7
43.31
43.31
59.06
59.06
78.74
43.31
43.31
59.06
59.06
78.74
3.94-5.91
4.92-6.89
2.95-5.91
3.94-5.91
4.92-6.89
O
0.55
0.75
1.02
1.26
1.38
Net
Weight
(lbs)
163
192
229
324
428
165
194
232
326
430
P
(
diameter
of
wheel)
2.68
2.68
3.29
3.86
3.9
FAMB-0.5
FAMB-1
FAMB-2
FAMB-3
FAMB-5
FBMB-0.5
FBMB-1
FBMB-2
FBMB-3
FBMB-5
1100
2200
4400
6600
11000
1100
2200
4400
6600
11000
Standard
LiA
(A)
0.5
1
2
3
5
0.5
1
2
3
5
10
10
10
10
10
10
10
10
10
10
W.L.L.
(mt)
0.5
1
2
3
5
A
6.34
6.69
5.24
5.83
7.2
B
4.88
5.04
6.5
8.19
10.74
50Hz
60Hz
23
20
10
7
*
23 / 6
21 / 5
10 / 1.6
7 / 1.6
*
27.5
24.5
12.5
8
4.8
27.5 / 7
24.6 / 6
12.5 / 3
8 / 2
4.8 / 1.2
C
8.82
9.41
9.41
9.41
9.4
Traversing
Traversing
Speed
(A/min)
Motor
Output
(H.P.)
*D
*E
*F
17.97 9.88 (10.94)
8.6
19.25 9.88 (10.94)
8.6
21.65 10.51 (11.57) 9.72
22.91 12.76 (15.75) 9.92
19.9
16.5
10.62
50 Hz
0.54
1.02
1.54
1.02
G
4.72
4.72
5.83
6.3
6.7
60 Hz
Net
Min.
Distance
Traversing
Trolley
Min.
Radius
Weight
H
(in)
I-Beam
Hook
:
Lug
(in)
Width
(lbs)
27.36 (23.62)
28.74 (24.61)
[16] [65] [19] [78]
35.83 (29.53)
MB type MB type
40.16 (33.86)
38.8
27.36 (23.62)
28.74 (24.61)
[16] [65] [19] [78]
35.83 (29.53)
MB type MB type
40.16 (33.86)
38.8
I
9.69
9.69
12.76
12.44
13.2
*J
4.49
4.49
5.39
7.13
6.77
K
1.69
1.97
2.56
2.36
2.76
L
1.04
1.22
1.5
1.69
1.77
M
3.31
4.06
5.33
6.5
6.7
2.95-5.91
3.94-5.91
4.92-6.89
2.95-5.91
3.94-5.91
4.92-6.89
N
0.75
0.98
1.38
1.93
2.08
43.31
43.31
59.06
59.06
78.74
43.31
43.31
59.06
59.06
78.74
O
0.55
0.75
1.02
1.26
1.38
163
192
229
324
433
165
194
232
326
438
P(diameter
of
wheel)
2.68
2.68
3.29
3.86
3.9
- 33 -
made
in
Japan
ELECTRIC
CHAIN HOIST
DA TYPE
1 SPEED
DB TYPE
2 SPEED
- 34 www.elephantlifting.com
Durable helical gears & an oil bath style gear case make these
units quiet during operation.
A DC solenoid is used for the electro-magnetic brake. This lowers the electrical consumption throughout the operation of the
electric chain hoist.
Electrical limit switch for this model acts in two steps. In the
first step the limit switch breaks the operating circuit. Then
within the second step, the limit switch breaks the main circuit.
Ensuring the hoist ceases operation.
- 35 -
250kg~2.5ton
1w~5ton
- 36 www.elephantlifting.com
10ton
W.L.L.
(lbs)
DA-0.25
550
0.25
0.313
DA-0.5
1100
0.5
0.625
DA-1W
2200
1.25
DA-1S
2200
1.25
DA-1.5
3500
1.5
1.88
DA-2W
4400
2.5
DA-2S
4400
2.5
DA-2.5
5500
2.5
3.13
DA-3
6600
DA-5
11000
DA-10
22000
10
20
10
20
10
20
10
20
10
20
10
20
10
20
Load
Chain
Dia
(mm)
x
Number
of
Falls
Li(ing
Motor
Output
(H.P.)
(DB)
High:Low
Speed
Net
Wt.
(lbs)
10'
:
20'
5.6 x 1
0.68
26
31
20.4
2.5
112 : 116
6.3 x 1
1.22
24
28
20.8
4.5
123 : 130
6.3 x 2
1.22-0.41
12
14
27.7
4.5
139 : 152
7.1 x 1
2.31
22
27
23
8.7
158 : 168
9.5 x 1
4.62
29
34
28.7
15.3
265 : 280
7.1 x 2
2.31
11
13
31
8.7
185 : 201
11.2 x 1
4.62
23
27
28.7
15.3
273 : 293
10
11.2 x 1
4.62
18
21
28.7
15.3
282
3.75
10
9.5 x 2
4.62
14
17
37
15.3
320
6.25
10
11.2 x 2
4.62
11
40.5
15.3
359
10
12.5
10
11.2 x 4
4.62 x 2
10
54.7
15.3
873
5.6 x 1
0.68 : 0.23
26 : 9
31 : 10
20.4
2.6
123 : 130
6.3 x 1
1.22 : 0.41
24 : 8
28 : 9
20.8
4.7
137 : 146
6.3 x 2
1.22 : 0.41
12 : 4
14 : 5
27.7
4.7
152 : 168
7.1 x 1
2.31 : 0.77
22 : 7
27 : 9
23
9.2
174 : 185
9.5 x 1
4.62 : 1.55
29 : 10
34 : 11
28.7
16
300 : 317
7.1 x 2
2.31 : 0.77
11 : 4
13 : 4
31
9.2
203 : 220
11.2 x 1
4.62 : 1.55
23 : 8
27 : 9
28.7
16
311 : 331
10
20
10
20
10
20
10
20
10
20
10
20
10
20
DB-0.25
550
0.25
0.313
DB-0.5
1100
0.5
0.625
DB-1W
2200
1.25
DB-1S
2200
1.25
DB-1.5
3500
1.5
1.88
DB-2W
4400
2.5
DB-2S
4400
2.5
DB-2.5
5500
2.5
3.13
10
11.2 x 1
4.62 : 1.55
18 : 6
21 : 7
28.7
16
317
DB-3
6600
3.75
10
9.5 x 2
4.62 : 1.55
14 : 5
17 : 6
37
16
357
DB-5
11000
6.25
10
11.2 x 2
4.62 : 1.55
9 : 3
11 : 3
40.5
16
394
DA / DB-0.25
DA / DB-0.5
DA / DB-1W
DA / DB-1S
DA / DB-1.5
DA / DB-2W
DA / DB-2S
DA / DB-2.5
DA / DB-3
DA / DB-5
DA-10
20.7 / 22.1
20.7 / 23.2
20.7 / 23.2
22.2 / 24.3
25.7 / 28.2
22.2 / 24.3
25.7 / 28.2
25.7 / 28.2
25.7 / 28.2
25.7 / 28.2
26.9
10.5 / 10.8
10.5 / 11.9
10.5 / 11.9
11.4 / 12.6
13.4 / 14.6
11.4 / 12.6
13.4 / 14.6
13.4 / 14.6
13.4 / 14.6
13.4 / 14.6
13.4
10.2 / 11.3
10.2 / 11.3
10.2 / 11.3
10.7 / 11.7
12.3 / 13.5
10.7 / 11.7
12.3 / 13.5
12.3 / 13.5
12.3 / 13.5
12.3 / 13.5
13.4
10.8
10.8
10.8
11.8
14.6
11.8
14.6
14.6
14.6
14.7
37.8
6.6
6.6
8.1
6.8
7.8
8.6
7.8
7.8
10.1
10.7
10.7
4.2
4.2
2.6
5
6.8
3.2
6.8
6.8
4.4
4.02
*
- 37 -
- 38 www.elephantlifting.com
W.L.L.
(lbs)
DAM-0.25
550
0.25
0.313
DAM-0.5
1100
0.5
0.625
DAM-1W
2200
1.25
DAM-1S
2200
1.25
DAM-1.5
3500
1.5
1.88
DAM-2W
4400
2.5
DAM-2S
4400
2.5
DAM-2.5
5500
2.5
3.13
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
LiEing
Motor
Traversing
Output
(H.P.)
Motorized
Trolley
(DB)
High:Low
Motor
Output
Speed
(H.P.)
Minimum
Distance
H
(in)
50Hz
60Hz
0.68
26
31
22.4
1.22
24
28
22.8
Traversing
Motorized
Trolley
Beam
Range
(in)
Trolley
Min.
Radius
(in)
Net
Wt.
(lbs)
161
165
2.95 - 5.91 43.3 [31.4]
1.22
12
14
29.1
203
22
27
24.4
223
4.62
29
34
30.7
434
2.31
11
13
4.62
23
27
28.9
4.62
18
21
29.5
2.31
0.54
65 / 78
33 / 39
31.2
59 [31.4]
273
434
3.94 - 5.91
423
59 [39.4]
DAM-3
6600
3.75
10
4.62
DAM-5
11000
6.25
10
4.62
DAM-7.5
16500
7.5
9.38
10
4.62
DAM-10
22000
10
12.5
10
DBM-0.25
550
0.25
0.313
DBM-0.5
1100
0.5
0.625
DBM-1W
2200
1.25
DBM-1S
2200
1.25
DBM-1.5
3500
1.5
1.88
DBM-2W
4400
2.5
DBM-2S
4400
2.5
DBM-2.5
5500
2.5
3.13
10
20
10
20
10
20
10
20
10
20
10
20
10
20
10
1.02
14
17
37.8
11
41.3
47.4
4.62 x 2
10
46.6
0.68 : 0.23
26 : 9
31 : 10
22.4
1.22 : 0.41
24 : 8
28 : 9
22.8
1.02 x 2
461
73.7 [39.4]
542
1058
1365
4.92 - 6.89
192
201
2.95 - 4.92 43.3 [39.4]
1.22 : 0.41
2.31 : 0.77
0.54
4.62 : 1.55
12 : 4
14 : 5
29.1
245
22 : 7
27 : 9
24.4
267
29 : 10
34 : 11
30.7
470
65 / 78
33 / 39
2.31 : 0.77
11 : 4
13 : 4
31.2
4.62 : 1.55
23 : 8
27 : 9
28.9
4.62 : 1.55
18 : 6
21 : 7
29.5
59 [31.4]
317
478
3.94 - 5.91
461
59 [39.4]
DBM-3
6600
3.75
10
4.62 : 1.55
DBM-5
11000
6.25
10
4.62 : 1.55
1.02
14 : 5
17 : 6
37.8
9 : 3
11 : 3
41.3
498
4.92 - 6.89 78.7 [39.4]
580
* If You Require 6 Bu2on Pendant Control in Place of 4 Bu2on, a "C" Should be Added to the End of the Model Name
* The Length of Power Cord 4Core Cable is 16'
* Standard Push Bu2on Cord is 2' Less than LiL
* Contact the Factory for Special Beam Widths for Motorized Trolley
* Special Motorized Trolleys Can be Supplied where the Trolley Minimum Radius is the Number Bracketed O
MODEL
A
B
C
19.0+2
9.8+
9.0+
2.9
DAM / DMB-0.25
DAM / DMB-0.5
19.0+2
9.8+
9.0+
2.9
DAM / DMB-1W
19.0+2
9.8+
9.0+
2.9
DAM / DMB-1S
19.0+2
9.8+
9.0+
2.9
DAM / DMB-1.5
20.0+2
10.5+
9.7+
3.9
DAM / DMB-2W
20.0+2
10.5+
9.7+
3.9
DAM / DMB-2S
20.0+2
10.5+
9.7+
3.9
DAM / DMB-2.5
22.5+2
12.7+
9.8+
3.9
DAM / DMB-3
22.5+2
12.7+
9.8+
3.9
DAM / DMB-5
24+2
13.4+
13.4+
4.9
DAM-7.5 & DAM-10
24+2
13.4+
13.4+
4.9
1. The Dimensions D and E Depend on the liF
2. For the Dimensions and , See Page 40
3. The Dimension K is in case of that "Traversing I Beam Width" is Minimum
CALL
D
6.6
6.6
8.1
6.8
7.8
8.6
7.7
7.7
10.2
10.7
-
E
4.3
4.3
2.7
5
6.9
3.2
6.9
6.9
4.5
4
-
F
9.5
9.5
9.5
9.5
11.3
11.3
11.3
12.4
12.4
13.2
27.4
mm
in
798
31.4
960
37.8
108
4.3
108
4.3
122
4.8
122
4.8
122
4.8
6.6
TOLL-FREE167
888-844-6113
167
6.6
172
6.8
G
4.7
4.7
4.7
4.7
5.8
5.8
5.8
6.3
6.3
6.7
14.2
I
10.5 / 10.9
10.5 / 11.0
10.5 / 11.0
11.4 / 12.5
13.5 / 14.6
11.4 / 12.5
13.5 / 14.6
13.5 / 14.6
13.5 / 14.6
13.5 / 14.6
13.5 / 14.6
J
10.3 / 11.3
10.3 / 11.3
10.3 / 11.3
10.8 / 11.7
12.3 / 13.6
10.8 / 11.7
12.3 / 13.6
12.3 / 13.6
12.3 / 13.6
12.3 / 13.6
12.3 / 13.5
mm
287
287
287
298
345
298
345
345
345
345
in
11.3
11.3
11.3
11.7
13.6
11.7
13.6
13.6
13.6
13.6
K
4.3
4.3
4.3
4.3
4.8
4.8
4.8
6.6
6.6
6.8
6.8
M
-
-
-
-
-
-
-
-
-
-
31.4 & 37.8
- 39 -
31
24
27
33
27
33
280
23
218
17
236
26
172
19
179
22
190
28
128
22
141
28
300
10
312
16
252
11
266
18
204
12
222
21
158
14
165
17
176
23
114
17
127
23
70
20
112
24
98
4
106
30
88
2
7.5
58
10
58
(a)
(b)
(a)
(b)
13
23
22
306
18
246
23
198
24
152
26
420
7
446
17
294
16
306
22
246
17
198
18
152
20
426
7
446
23
294
16
306
22
246
17
198
18
152
20
(b)
(a)
(a)
(b)
288
20
(b)
(a)
(a)
(b)
314
15
300
3
300
10
(b)
(a)
(a)
(b)
(b)
(a)
(a)
(b)
(b)
(a)
(a)
(b)
(b)
(a)
(a)
(b)
(b)
(a)
(b)
426
13
420
7
372
11
426
7
372
11
446
23
425
7
446
17
392
21
446
23
392
21
294
22
273
6
294
16
240
20
294
16
240
20
326
21
312
9
312
16
295
7
306
18
285
12
306
22
306
22
266
16
252
4
252
11
246
23
225
7
246
17
192
21
246
17
192
21
280
23
266
11
266
18
249
9
239
14
240
22
218
17
204
5
204
12
187
3
198
24
177
8
198
18
144
22
198
18
144
22
195
17
194
24
172
19
158
7
158
14
141
5
152
26
131
10
152
20
98
24
152
20
98
24
179
22
165
10
165
17
148
9
218
27
204
7
212
33
194
5
190
28
176
16
176
23
159
14
138
14
149
19
250250
125125
10/19
10/19
73107310
207
21
193
2
201
27
300300
150150
8/13
8/13
94809480
300300
150150
10/18.5
10/18.5
12700
12700
350350
150150
9/15
9/15
15200
15200
264
25
250
5
258
31
240
3
236
26
222
14
222
21
205
12
300300
150150
11.5/22
11.5/22
14700
14700
308
22
294
2
302
28
350350
150150
12/24
12/24
22400
22400
400400
150150
10/18
10/18
24100
24100
400400
150150
12.5/25
12.5/25
31700
31700
(a)
450450
175175
11/20
11/20
39200
39200
17
32
17
31
26
47
47
67
33
48
58
73
58
73
450450
175175
13/26
13/26
48800
48800
0.250.5
0.250.5
1S1W
1S1W
1.52S2W
1.52S2W
2.53W
2.53W
5
5
7.5
7.5
10
10
600600
190190
13/25
13/25
98400
98400
I-beam width
Min.
(C)
I-beam width
(C)
600600
190190
16/35
16/35
130000
130000
Trolley model
W.L.L.(ton)
Trolley
model
(number
of falls)
W.L.L.(ton)
(number of falls)
31
36
124
30
110
10
118
36
100
8
96
31
82
19
104
30
90
10
98
36
80
8
108
29
Combination
ofElectric
ElectricTrolleys
Trolleys
with
Traversing
Combination of
with
Traversing
RailsRails
Combination of
Plain/Geared
Trolley
with
Traversing
Ralis
I-beam
HBtt
I-beam
HBtt
Min.
36
96
31
156
21
150
27
128
22
114
10
114
17
97
8
108
29
87
13
169
27
155
8
163
33
145
6
141
28
127
16
127
23
110
15
70
13
70
20
53
11
66
26
52
6
54
31
42
4
75
30
61
11
63
36
51
9
100100
75
5/8
755/8
281 281
(b)
36
125125
75
5.5/9.5
755.5/9.5
538 538
(a)
DA/DB HEAVY DUTY
ELECTRIC
CHAIN
HOIST
426
446
294
33
5
30
150150
75
5.5/9.5
755.5/9.5
819 819
(b)
22
266
16
150150
125125
8.5/14
8.5/14
17601760
(a)
28
326
21
180180
100100
6/10
6/10
16701670
47
(b)
20
314
15
200200
100100
7/10
7/10
21702170
2.53W
(a)
200200
150150
9/16
9/16
44604460
26
250250
125125
7.5/12.5
7.5/12.5
51805180
1.52S2W
50
30
36
11
159
97
110
53
100755/8
281
2001509/16
4460
148
125755.5/9.5
538
2501257.5/12.5
5180
141
150755.5/9.5
819
25012510/19
7310
205
1501258.5/14
1760
3001508/13
9480
187
1801006/10
1670
30015010/18.5
12700
249
2001007/10
2170
30015011.5/22
14700
40015012.5/25
31700
45017513/26
48800
45017511/20
39200
295
3501509/15
15200
(b)
35015012/24
22400
67
40015010/18
24100
2.53W
60019013/25
98400
60019016/35
130000
7
9
3
5
9
14
8
15
11
If there is even one blank at either of the upper, medium
and lower
rows
of 12the Table,
this
means
that
such
relevant
rail can't be used to together
(a)
with the trolleys.
425
273
285
225
239
177
195
131
138
149
87
48 (b)
5
7 see6what12
7 rail(I
14beam)
8 is suited
17
10 the 14
13
In this way, referring to the Table, you will
type of
to
trolley19you have
selected.
Then it is needed to check if(a)such372
rail satisfies
the following
condition:144even if it is98given a 125% of the rated safety load, its deflection amount shall
392
240
192
73
7.5
be 1/1200 of its support span(b)or less.
That
the I beam 21
to be selected
11
21 is, 20
22 shall have
24 its moment of inertia of the longitudinal section (lx) be as follows:
(a)
372
392
240
192 2
144
98
10
L
lx: Moment
of inertia of73the logitudinal
section
119.1W
(b)
11
21
20
21
22
24
In which,
W: W.L.L.1.25+Chain block's own weight(ton)
For
understanding
L: Support
span(m)the descriptions at the upper row of the Table:
trolley's top B/4
1. As for the rails
belonging
continued
from
page 11to the blue indicated zone, the standard type trolleys can be fitted to each of them.
2. As"Combination
for the
to the
gray-indicated
zone, suchRails",
trolleysthe
as following
having special
to meet
continued
on rails
12 belonging
For
of Electric
Trolleys
with Traversing
mustdimensions
be taken note
of: them
(a)
must
preparedrow
separately.
At
thebemedium
of the table:
(c)
For
understanding
descriptionsindicated
at the medium
of the
Table:
In the
case of thethe
combination
with arow
gray
zone,
the relation HK applies to both plain trolley and geared trolley. (b)
Each
of
the
figures
indicated
at
this
row
shows
the
distance
[a](unit:mm)
of
the
sketch
at
right
side.
In the case of the combination indicated with a blue zone, the relation HK applies only to the geared trolley.
This distance [a] may be zero or negative depending on the combination of the standard trolley with some types of
rails: for this case, no figure is given here because such combination can't be put in actual application.
The dimensions A, B, C of the trolley will vary with the change of the traversing rail's width to be used.
In the case of the combination indicated with a blue figure, the trolley's top is higher than the rali's top so that the torlley may touch the ceiling
The
figure
the
Table can
be obtained
suspending
theinrail
(HK):pay
attention
to this.from the following equation: =1/2x[width(mm) of the traversing rail-]
For understanding the descriptions at the lower row of the Table:
Each of the figures indicated at this row shows the distance [b](unit:mm) of the sketch at the right side. The distance [b] may be zero or negative
depending on the combination of the standard trolley with some type of rails: for this case, no figure is given here because such combination can't
be put in actual application. Also for the rails whose thickness t2 is too thin to hold the rated load, no figure is given.
NOTES
THE
WIRING
DIAGRAM
If there is evenON
one blank
at either
of the upper,
medium and lower rows of the Table, this means that such relevant rail can't be used to together
- 40 -
The electrical parts used for our chain blocks are all the precision ones which can normally operate even with
www.elephantlifting.com
W
L2
lx: Moment
of inertia of the
logitudinal
section
an accidental
voltage
drop
(witha119.1
10%
reduction
of the rated voltage)
In which,
CHAIN HOIST
E
Kind of Insulation
E
E
LM
TM
LM
Intermittent duty
High speed
Low speed
Short time duty
30 minutes
15 minutes
High speed
Low speed
Low speed
Intermittent duty
40% ED, Number of starts : 240/h 20% ED, Number of starts : 120/h
High speed
Low speed
30 minutes
15 minutes
High speed
3. As to the 4-core power cord, or the 7-core cabtyre cord used for the DAGC, DBGC, DAPC or DBPC type, they
are each usually of 5m in length. The cords of other length than the above, or of special dimensions, are
available
3. As
to the upon
4-corerequest.
power cord, or the 7-core cabtyre cord used for the DAGC, DBGC, DAPC or DBPC type, they
are each usually of 5m in length. The cords of other length than the above, or of special dimensions, are
available upon request.
4. When connecting the power cord to the power source, take care of its correct phase so that the lifting motor can
rotate in UP direction and DN direction according to the push of the UP button and DN button on the control
switch.connecting
If the connection
phase
negative
toso
work
the lifting
4. When
the power
cord isto reversed,
the powerthe
source,
take phase
care ofprotector
its correctstarts
phase
thattotheprevent
lifting motor
can
motor
in either
direction.
If this
occurs,toexchange
connection
phase
thebutton
black on
andthe
redcontrol
leads
rotate from
in UProtating
direction
and DN
direction
according
the push the
of the
UP button
andofDN
from
each
other:
at the time,
avoid
connections
the control
switch,
chain
andthe
trolley.
switch.
If the
connection
phase
is changing
reversed,the
thewire
negative
phase in
protector
starts
to work
toblock
prevent
lifting
motor from rotating in either direction. If this occurs, exchange the connection phase of the black and red leads
from each other: at the time, avoid changing the wire connections in the control switch, chain block and trolley.
5. The running direction of the electric trolley and/or the saddle has been decided at the shipment, and it may be
changed, at your site, by changing the wire connection at the control switch case.
5. The running direction of the electric trolley and/or the saddle has been decided at the shipment, and it may be
changed, at your site, by changing the wire connection at the control switch case.
HOIST CLASSIFICATION
JIS/ISO classification
FEM classification
ASME classification
International protection
DB
DA
M5
JIS/ISO classification
M5
M5
2m
FEM classification
2m
2m
H3
ASME classification
H3
H3
IP54
International protection
IP54
IP54
DB
M5
2m
H3
IP54
HOIST CLASSIFICATION
DA
The specification and dimensions may be changed without prior notice for improvement.
The specification and dimensions may be changed without prior notice for improvement.
- 41 -
DA/DB
DEFINITION OF WORDS
DEFINITION OF WORDS
L
PushbuttonL cord length
As Lift
the electric
chain block
and Length
ofis operated, its
bottom hook moves up and down and the
Pushbutton
Switch
longest distance of this motionCord
is called a
"lift". In other words, the lift refers to the
distance between the bottom hook's highest
As the electric
is operated,
its
position
(with thechain
upperblock
limit switch
actuated)
bottom
up(with
and the
down
and limit
the
and
its hook
lowestmoves
positon
lower
longestactuated).
distance of this motion is called a
switch
"lift". length
In other
the lift refers
the
The
of words,
the pushbutton
switchtocord
distance
between
the between
bottom hook's
highest
refers
to the
distance
the bottom
of
position (with
limit switch
actuated)
dimension
L the
andupper
the lower
surface
of the
and its lowest
positon
lower
limit
pushbutton
switch
case. (with the
upper
limit
switch actuated).
positon
The length of the pushbutton switch cord
refers to the distance between the bottom of
dimension L and the lower surface of the
pushbutton switch case.
Saddle
upper limit
positon
Saddle
g
versin
Tra
vel
ing
Tra
Lift
vel
ing
Lift
upper limit
positon
Lift
Pushbutton Pushbutton
cord length cord length
Tra
As Short
a criterion
to indicate
the strength
Time
Duty
Rating
andand
rest chain
durability of our3 sec.
electric
blocks. We
Intermittent
Duty
Rating
have specified the ratings of the short time
duty and intermittent duty concerning their
thelower
page 12
included
motors-see1m
1m electric
lift
Ascatalogs.
a criterion to indicate the strength and
of
durability of our electric chain blocks. We
Short
Timethe
Duty
Rating
have specified
ratings
of the short
3 sec.time
rest
"Short
time
duty rating"
the limited
duty and
intermittent
dutymeans
concerning
their
1 temperature
cycle the page
time
that electric
the admissible
limit 12
of
included
motors-see
of
its catalogs.
electric motor won't be exceeded, when
the electric chain block is operated
Tested
bythe
W.L.L.
Short
Time
Duty
Rating
continuously
on
below
cycle.
"Short time duty rating" means the limited
time that the admissible temperature limit of
3 sec. won't
rest be exceeded, when
its Intermittent
electric motor
Duty Rating
the Compared
electric with
chain"short
block
operated
timeisduty
rating", the
continuously
on the
temperature
of below
motorcycle.
rises gradually by
1m
lift
properly
giving rests 1m
to lower
the chain block
between3 its
periods (lifting and
sec.operating
rest
lowering). The percentage3 duty
cycle ED is
sec. rest
found as follows.
Operating
periods(t
1+t3)
1 cycle
1m lift
1m lower
%ED=
100
Operating + Rest periods(T)
Tested
by
W.L.L.
based on the maximum cycle
3 sec.period
rest of 10
minutes. The number of starts/h also affects
1 cycle
the rise of temperature.
Thus these two
factors are specified
to show the intermittent
Intermittent
Duty Rating
duty rating
the electric
chain
blockthe
under
Compared
withof"short
time duty
rating",
Tested
by W.L.L. of which the electric motor
the specification
temperature
of motor rises gradually by
can begiving
operated
safely
without
exceeding
properly
rests
to the
chain
block its
admissible
temperature
limit. (lifting and
between
its operating
periods
Intermittent
Duty Rating
lowering). The percentage
duty cycle ED is
Compared
with "short time duty rating", the
found
as follows.
rest
temperatureOperating
of motor
rises1+tgradually
by
periods(t
3)
%ED=
properly giving rests to the chain 100
block
Operating + Rest periods(T)
between its operating periods (lifting and
lowering).
The
percentagecycle
duty
cycle ED
is
based
onlift
the maximum
period
of 10
lower
found as follows.
minutes.
The number of starts/h also affects
the rise of Operating
temperature.
Thus
periods(t
1+t3) these two
%ED=
100
factors are specified to show the intermittent
Operating + Rest periods(T) rest
duty rating of the electric chain block under
2
t 3 electric
t 4 10
t 1 maximum
based
on the
cycle
period motor
of
the
specification
of twhich
the
minutes.
TheT(1
number
starts/hexceeding
also affects
can
be operated
safelyofwithout
its
cycle)(maximum10minutes)
the rise oftemperature
temperature.
admissible
limit.Thus these two
factors are specified to show the intermittent
Tested
of W.L.L.
duty rating
of by
the63%
electric
chain block under
rest
the specification of which the electric motor
can be operated safely without exceeding its
admissible temperature limit.
lift
lower
rest
rest
t2
t 3lower
t4
liftt 1
T(1 cycle)(maximum10minutes)
Tested by 63% of W.L.L.
t2
t3
t1
rest
t4
T(1 cycle)(maximum10minutes)
Tested by 63% of W.L.L.
The specification and dimensions may be changed without prior notice for improvement.
- 42 www.elephantlifting.com
Standard lift( ft )
W. L. L.(mt)
15
13
11.2 6
DA/DB
HEAVY 275.5
DUTY ELECTRIC
CHAIN HOIST
HOOK DIMENSIONS
Insulation
Intermittent duty
20% ED,
2S
2W
2. 5
2S
2W
7. 5
10
9.0
5.3
5.3
5.3
6.49
7.2
9.0
.59
1.0
1.0
1.0
1.37
1.37
1.88 1.88
1.0
1.0
1.18
1.45
1.45
1.45
1.88
2.28
2.8
2.8
1.3
1.69
1.96
2.55
2.55
2.55
2.36
2.75
3.3
3.3
.7
.7
.98
1.37
1.37
1.37
1.9
2.08
2.48 2.48
1.5
1.7
3.7
25
39
143
176
1. 5
4.05
1W
.55
1S
3.3
15 minutes
Low
speed
weight
(lbs)
.59
High speed
11.2 8
2.9
Intermittent duty
275.5
30 minutes
DIMENSION
Per 3.2
Per 3.2 lift
1.4
1.89
8
2
1.89
2.4
3.79
7.7
7.7
12
7.7
4.3
5.8
2.4
4.85
5.86
Hooks are
Number
of produced
starts : through
120/h a hot forging process and so the dimensions may have some errors :
3% for the 7.5 and/or 10t hook.
4.3
5.86
5.86 5.86
8.6
11.75
17.6 23.5
Reading of Model/Code
Class Code
7-core cabtyre cord used for the DAGC, DBGC, DAPC or DBPC type, they
The cords of DA-0.25
other length than the above, or of special dimensions, are
DBP-3
Typical Examples
DAG-2 S
DAMC-1 W
the power source, take care of its correct phase so that the lifting motor can
To show the number of falls
tion according to the push of the UP button and DN button on the control
Toprotector
show the rated
eversed, the negative phase
startsload
to work to prevent the lifting
capactiy(ton)
n. If this occurs, exchange the
connection phase of the black and red leads
the classswitch,
of eachchain block and trolley.
hanging the wire connectionsToinshow
the control
model
code:
Class
trolley and/orItthe
saddlethe
has
been
decided
the shipment, and it may be
identifies
type
(single
speed at
or dual
speedattype),
the number
of buttons
he wire connection
the control
switch
case. on the
control switches and kinds of trolleys
(electric, geared or plain). See the sketches
at right.
load capacity:
Rated
It Identifies whether
the classification
relevant chain
ASME
FEM classification
International protection
block is the 1-fall type or the 2-fall type
H3
2m block(S=1, W=2).
IP54
Usually the pushbuttons located on the control switch are labeled as "UP", "DN", "L", "R", "E", "W", "S"
Note: Indication of the number of falls is
2m
IP54
and
"N". The other types of labeling are avaliable upon request.
omitted for certain H3
model in the case
the case of the dual speed type (DB type), the chain block can be wound UP and DOWN at either high
Inspeed
where it has been specified
or low speed. The UP
and Down buttons are each of push-push type: at the first push, it
provided low speed operation and at the second push, it provides high speed operation.
according to its rated load capactiy.
The specification and dimensions may be changed without prior notice for improvement.
- 43 -
made
in
Japan
LARGE
CAPACITY
- 44 www.elephantlifting.com
W.L.L. (mt)
DA-15
DA-20
DA-30
DA-50
15
20
30
50
Standard
LiG
(G)
13
13
13
13
LiGing
Motor
Output
(H.P.)
4.62 x 2
4.62 x 2
4.62 x 2
4.62 x 2
Trolley
Min.
Radius
(in)
70.8
81.4
98.4
114
Traversing
Motor
Output
(H.P.)
Trolley
Min.
Radius
(in)
-
-
2.04
2.04
11.2 x 6
11.2 x 8
11.2 x 12
11.2 x 22
11.2 x 6
11.2 x 8
11.2 x 6
11.2 x 8
- 45 -
made
in
Japan
SD A M
SD B M
SERIES
LOW HEADROOM
ELECTRIC CHAIN HOIST
- 46 www.elephantlifting.com
Model
SDAM-0.25
SDAM-0.5
SDAM-1W
SDAM-1S
SDAM-1.5
SDAM-2W
SDAM-2S
SDAM-2.5
SDAM-3
SDAM-5
SDAM-7.5
SDAM-10
SDAM-15
SDAM-20
Dia. of Load
Traversing
Capacity
Test
Load
Standard
Li=ing
Spd
=
Li=ing
Motor
Chain
(mm)
Motor
Output
Output
(H.P.)
per
min
(60Hz)
metric
ton metric
ton Li=
(=)
x
Falls
(H.P.)
250kg
0.5
1
1
1.5
2
2
2.5
3
5
7.5
10
15
20
313kg
625kg
1.125
1.125
1.88
2.5
2.5
3.13
3.75
6.25
9.375
12.5
18.75
25
10
10
10
10
10
10
10
10
10
10
6.3x1
6.3x1
6.3x2
7.1x1
9.5x1
7.1x2
11.2x1
11.2x1
9.5x2
11.2x2
1.22
1.22
1.22
1.5
4.62
2.31
4.62
3.4
4.62
4.62
28
18.5
14
18
21.5
13
21
14
17
10.5
0.54
1.02
Contact Factory
SDBM-0.25
250kg
313kg
10
6.3x1
SDMB-0.5
0.5
625kg
10
6.3x1
SDBM-1W
1
1.125
10
6.3x2
SDBM-1S
1
1.125
10
7.1x1
SDBM-1.5
1.5
1.88
10
9.5x1
SDBM-2W
2
2.5
10
7.1x2
SDBM-2S
2
2.5
10
11.2x1
SDBM-2.5
2.5
3.13
10
11.2x1
SDBM-3
3
3.75
10
9.5x2
SDBM-5
5
6.25
10
11.2x2
SDBM-7.5
7.5
9.375
SDBM-10
10
12.5
SDBM-15
15
18.75
SDBM-20
20
25
* Contact Factory for I Beam Width
* Galvanized Load Chain is Standard on Units with 10' LiV
1.22 : 0.41
1.22 : 0.41
1.22 : 0.41
2.31 : 0.77
4.62 : 1.55
2.31 : 0.77
4.62 : 1.55
4.62 : 1.55
4.62 : 1.55
4.62 : 1.55
28 : 9
28 : 9
14 : 4.5
27 : 9
22 : 7.5
13 : 4
21: 7
21 : 7
17 : 5.5
10.5 : 3
0.54 : 0.14
1.02 : 0.14
Traversing
Spd
Headroom
I
Beam
Width
(in)
=
per
min
(in)
(60Hz)
14.37
14.37
18.7
16.53
18.89
78.5
20.07
Manufactured to
20.47
22.04
SpecicaYon
25.19
28.74
31.49
31.49
38.58
41.73
78.5 : 39
Contact Factory
14.37
14.37
18.7
16.53
18.89
20.07
20.47
22.04
25.19
28.74
31.49
31.49
38.58
41.73
Manufactured to
SpecicaYon
Model
SDAM-0.25
SDAM-0.5
SDAM-1W
SDAM-1S
SDAM-1.5
SDAM-2W
SDAM-2S
SDAM-2.5
SDAM-3
SDAM-5
SDBM-0.25
SDMB-0.5
SDBM-1W
SDBM-1S
SDBM-1.5
SDBM-2W
SDBM-2S
SDBM-2.5
SDBM-3
SDBM-5
18.50
18.50
18.50
19.69
24.02
20.08
24.80
24.80
24.02
26.38
18.50
18.50
18.50
19.69
24.02
20.08
24.80
24.80
24.02
26.38
27.72
27.72
27.72
28.90
35.51
31.57
36.30
36.69
35.91
39.45
27.72
27.72
27.72
28.90
35.51
35.51
36.30
36.69
35.91
39.45
10.28
10.28
10.28
10.75
12.28
10.75
12.28
12.28
12.28
12.28
11.30
11.30
11.30
11.69
13.54
11.69
13.54
13.54
13.54
13.54
10.51
11.93
10.51
12.60
13.43
11.42
13.43
14.61
13.43
13.43
11.93
11.93
11.93
12.60
14.61
12.60
14.61
14.61
14.61
14.61
19.02
19.02
19.02
20.63
24.13
21.18
25.00
25.16
24.29
26.57
19.02
19.02
19.02
20.63
24.13
21.18
25.00
25.16
24.29
26.57
14.37
14.37
18.70
16.54
18.90
20.08
20.47
22.05
25.20
28.74
14.37
14.37
18.70
16.54
18.90
20.08
20.47
22.05
25.20
28.74
1.69
1.69
1.97
1.97
2.56
2.56
2.56
2.56
2.36
2.76
1.69
1.69
1.97
1.97
2.56
2.56
2.56
2.56
2.36
2.76
0.55
0.55
0.59
0.59
1.02
1.02
1.02
1.02
1.26
1.38
0.55
0.55
0.59
0.59
1.02
1.02
1.02
1.02
1.26
1.38
1.02
1.02
1.22
1.22
1.50
1.50
1.50
1.50
1.73
1.89
1.02
1.02
1.22
1.22
1.50
1.50
1.50
1.50
1.73
1.89
243
243
280
309
562
375
584
595
617
750
278
278
322
353
609
419
628
633
655
787
- 47 -
made
in
Japan
ALPHA
SERIES
C O M PAC T
1 - PH A S E
3 - PH A S E
- 48 www.elephantlifting.com
- 49 -
S SERIES
1-PHASE
1-SPEED
SB SERIES
1-PHASE
Dual SPEED
SV SERIES
1-PHASE
VARIABLE SPEED
60kg ~ 250kg
500kg
Motor Output
A (inches)
Single
Phase
Specifications - ALPHA ELECTRIC CHAIN HOIST SINGLE PHASE
S-006
S-05
SV-006
SV-05
SB-006
SB-01
H-006
H-01
H-016
H-025
H-05
HV-006
HV-01
HV-016
HV-025
HV-05
HB-06
HB-01
HB-016
HB-025
HB-05
130
220
350
550
1100
130
220
350
550
1100
130
220
350
550
1100
60
100
160
250
500
60
100
160
250
500
60
100
160
250
500
Type
Model
300
600
600
25
30
180
300
6 [4]
8[5]
12[6]
300
600
25
30
180
12[6]
12[6]
6 [4]
8[5]
12[6]
SB-05
25
30
180
12[6]
12[6]
6 [4]
8 [5]
12[6]
12[6]
12[6]
Low [16]
Low [13]
Low [16]
Low [13]
Low [6]
High [16]
42
42
49
32
16
[3] [42]
[3] [42]
[3] [49]
[3] [32]
[1.5] [16]
High [42]
High [42]
High [49]
High [32]
Standard LiY ( Y )
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12.8
12.8
12.8
12.8
16.34
12.8
12.8
12.8
12.8
16.34
12.8
12.8
12.8
12.8
16.34
Headroom ( in )
Push-buZon Cord Length ( Y )
Load Chain - Dia. X Pitch ( mm )
Net Weight ( lbs )
Notes:
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
32
32
36
36
44
33
33
38
38
45
32
32
36
36
44
- 50 www.elephantlifting.com
SM SERIES
1-PHASE
1-SPEED
SBM SERIES
1-PHASE
Dual SPEED
Motor Output
A (inches)
SVM SERIES
1-PHASE
VARIABLE SPEED
3.9
4.9
14.8
15.7
16.7
0.9
1.9
2.9
8.1
8.6
9.1
Rated
Rated
Headroom
Standard
Voltage
(V)
Load
(lbs) Load
(kg)
(in)
Li0
(0)
Motor
output
(KW)
100-115V
SM-006
SVM-006
SBM-006
SM-01
SVM-01
SBM-01
SM-016
SVM-016
SBM-016
SM-025
SVM-025
SBM-025
SM-050
SVM-050
SBM-050
200-230V
HM-006
HVM-006
HBM-006
HM-01
HVM-01
HBM-01
HM-016
HVM-016
HBM-016
HM-025
HVM-025
HBM-025
HM-050
HVM-050
HBM-050
Notes:
1. The minimum distance between hooks slightly differs according to the size of the applicable traverse trail.
2. The single-phase traverse motor has E-class insulation, and the short time rating is 15 min.
3. The power cord of 0.5m extending from the trolley (3-core; 1 pc. for earth) is supplied.
130
130
130
220
220
220
350
350
350
550
550
550
1100
1100
1100
60
60
60
100
100
100
160
160
160
250
250
250
500
500
500
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
115/230V
16.77
16.77
16.77
16.77
16.77
16.77
16.77
16.77
16.77
16.77
16.77
16.77
20.31
20.31
20.31
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
42
[3] [42]
L[16] H[42]
42
[3] [42]
L[13] H[42]
49
[3] [49]
L[16] H[49]
32
[3] [32]
L[13] H[32]
16
[1.5] [16]
L[6] H[16]
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
32 / 39
43.31
43.31
43.31
43.31
43.31
43.31
43.31
2.95
3.94 43.31
4.92
43.31
43.31
43.31
43.31
43.31
43.31
43.31
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
Net
Weight
(lbs)
72
73
72
72
73
72
72
77
76
76
77
76
84
85
84
- 51 -
C SERIES
3-PHASE
1-SPEED
60kg ~ 250kg
500kg
Model
Rated Load (lbs)
Rated Load (kg)
Motor Output (W)
Short Time Ra;ng (min)
Repe;;on Ra;ngs
Notes:
Motor Output
A (inches)
C-015
C-025
C-05
330
150
550
30
30 or 40
1200 or 240
3
50 Hz - 60 Hz
29 36
10
12.8
8
4 x 12
40
550
250
550
30
30 or 40
1200 or 240
4
50 Hz - 60 Hz
29 36
10
12.8
8
4 x 12
40
1100
500
550
30
30 or 40
1200 or 240
4
50 Hz - 60 Hz
15 18
10
16.34
8
4 x 12
48
- 52 www.elephantlifting.com
CM SERIES
3-PHASE
1-SPEED
Motor Output
A (inches)
Motor
output
(KW)
3.9
4.9
14.8
15.7
16.7
0.9
1.9
2.9
8.1
8.6
9.1
CM-015
330
150
200 ~ 400
16.77
10
0.75
50Hz
9
CM-025
550
250
200 ~ 400
16.77
10
0.75
11
0.41
CM-050
1100
500
200 ~ 400
16.77
10
0.75
4.5
0.4
0.54
Notes:
Rated
Rated
Headroom
Standard
Voltage
(V)
Load
(lbs) Load
(kg)
(in)
Li/
(/)
0.41
65 / 78
32 / 39
Net
Weight
(lbs)
2.95
35.43
3.94
3.94
35.43
3.94
79
79
4.92
43.31
4.92
87
- 53 -
SDH SERIES
1-PHASE
115V
HDH SERIES
1-PHASE
230V
CDH SERIES
3-PHASE
460V
Single
Phase
Specifications - ALPHA ERGO GRIP
1 PHASE
Type
115v
230v
Model
Frequency (Hz)
/ / min
Headroom ( in )
Weight (lbs)
Notes:
Dual-Speed
Type
SBDH-01
SBDH-025
HBDH-01
HBDH-025
100
250
220
550
8
8
300
600
0.4
0.8
25
25
60
60
13 / 43
13 / 33
26.5
26.5
44
49
Variable
Speed
SVDH-01
SVDH-025
HDVH-01
HDVH-025
100
250
220
550
8
8
300
600
0.4
0.8
25
25
60
60
3 ~ 43
3 ~ 33
26.5
26.5
44
49
- 54 www.elephantlifting.com
Dimension
A
(in)
7
9.1
8
Dimension
B
(in)
8.7
9
9
3
-
3
Phase
ALPHA ERGO GRIP
PHASE
Type
Model
C-015
C-025
150
330
8
550
0.75
30
50 / 60
250
550
8
550
0.75
30
50 / 60
30 / 36
26.5
51
30 / 36
26.5
51
Frequency (Hz)
Li4ing Speed
4 / min
Headroom ( in )
Weight (lbs)
made
in
Japan
BETA
COMPACT
ELECTRIC CHAIN HOIST
BS-012
BS-020
Capacity (kg)
150
200
Capacity (lbs)
275 lb
440 lb
0.25
25
30%
%ED
180
Ampare (A)
LiMing speed (M / min.)
Headroom(in)
Load chain (Dia. X Pitch)
21
12.5
11
3mm x 9mm
Weight
* Maximum liM is 32 M
- 55 -
made in
South
Africa
Standard Model ATS Air Chain Hoists are Acceptable for Division 1 & 2 Applications
Division 1 (Spark-Resistant air hoists are required)
Atmospheres containing hazardous concentrations of flammable gases, dusts, or fibers, continuously, frequently
made in South
or periodically, under normal operating conditions.
Africa
Division 2 (Standard air hoists are required)
Atmospheres, normally non-hazardous, in which a hazardous concentration of flammable gases, dusts, or fibers,
occurs when a container or handling system fails, or the ventilating system which normally keeps the concentration
non-hazardous fails
- 56 www.elephantlifting.com
made in
South
Africa
made in South
Africa
0.25ton-2ton
0.25t to 2t
LiAing Capacity
mt
T
H.P.
kW
lbs.
lbs.
lbs.
mm
PSI
bar
cfm
m3/min
A. / min.
A. / min.
A. / min.
A.
A.
0.25
0.27
1
1.9
1.4
55
62
0.75
7x21
87
6
60-75
1.75
0.5
1
0.55
1.1
1
1
1.9
1.9
1.4
1.4
55
64
62
71
0.75
0.75
7x21
7x21
87
87
6
6
60-75
60-75
1.75
1.75
1" BSP
3/4" (19mm - 25mm)
89
62
36
98
98
45
108
108
36
10
10
10
6.5
6.5
6.5
84 Dba @ 1m
2
2.2
1
2.4
1.8
72
79
1.5
9x27
87
6
95
1.75
29
43
45
10
6.5
A min. headroom
B
C
D
E1
E2
G maximum width
H
I
J (hook Width)
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
0.25
ton
12.8
325
4.0
102
3.9
99
10.8
274
0.9
22
0.9
22
5.7
146
6.9
175
7.7
196
0.7
19
0.5
ton
12.8
325
4.0
102
3.9
99
10.8
274
0.9
22
0.9
22
5.7
146
6.9
175
7.7
196
0.7
19
1
ton
12.8
325
4.7
120
8.0
202
15.0
382
1.3
32
1.3
32
5.7
146
7.1
180
8.3
211
0.9
23
2
ton
12.8
325
4.7
120
8.0
202
15.0
382
1.3
32
1.3
32
5.7
146
7.1
180
8.3
211
0.9
23
- 57 -
made in
South
Africa
made in South
Africa
3ton-10ton
D
C
E1
E2
LiBing Capacity
mt
T
3
3.3
1
H.P.
2.4
kW
1.8
lbs.
130
lbs.
137
lbs.
2.6
mm
13 x 36
PSI
72-102
bar
5-7
cfm
110
m3/min
1.75
B. / min.
B. / min.
B. / min.
B.
B.
4.2
5
4.6
5.5
1
1
3.3
3.3
2.5
2.5
160
162
167
169
2.5
3
13 x 36 16 x 45
72-102 72-102
5-7
5-7
110
110
1.75
1.75
1" BSP
3/4" (19mm - 25mm)
18.3
8.5
8.5
23.75
9.8
18.3
25.4
11.4
2.4
10
10
10
6.5
6.5
6.5
84 Dba @ 1m
6
6.6
2
2.4
1.8
171
178
5.2
13 x 36
72-102
5-7
110
1.75
10
11
2
3.3
2.5
267
274
7.9
16 x 45
72-102
5-7
110
1.75
9.3
13.1
14.3
10
6.5
4.2
9.1
11.8
10
6.5
A min. headroom
B
C
D
E1
E2
G maximum width
H
I
J (hook Width)
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
3
ton
20.6
522
8.9
225
9.2
234
18.9
480
1.6
40
1.6
40
9.4
240
9.7
246
11.8
299
1.8
45
4.2
ton
22.6
575
10.8
275
10.5
266
17.9
454
1.7
42
1.7
42
7.8
198
7.4
188
11.7
297
3.1
80
- 58 www.elephantlifting.com
5
ton
24.5
623
10.8
275
10.7
271
18.3
464
1.7
42
1.7
42
11.2
285
7.6
193
13.8
351
3.1
80
6
ton
25.6
650
13.1
333
9.2
234
18.9
480
1.6
40
1.6
40
9.4
240
9.7
246
16.7
423
1.9
48
10
ton
31.5
800
12.6
320
10.5
267
20.5
521
1.7
42
1.7
42
13.4
340
10.0
254
18.9
480
2.1
53
made in
South
Africa
made in South
Africa
15ton-25ton
E1
D
G
H
E2
J
LiAing Capacity
mt
T
H.P.
kW
lbs.
lbs.
lbs.
mm
PSI
bar
cfm
m3/min
A. / min.
A. / min.
A. / min.
A.
A.
15
20
16.5
22
3
4
3.4
3.4
2.5
2.5
518
683
525
690
3.75
6.25
16 x 45
16 x 45
87
87
6
6
110
110
1.75
1.75
1" BSP
3/4" (19mm - 25mm)
2.9
2.1
6.1
4.6
4.8
5.9
10
10
6.5
6.5
84 Dba @ 1m
25
27.5
4
3.4
2.5
794
801
7.5
16 x 45
87
6
110
1.75
1.7
4.5
6
10
6.5
A min. headroom
B
C
D
E1
E2
G maximum width
H
I
J (hook Width)
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
15
37.0
940
17.1
434
10.5
267
20.5
521
1.9
48
1.9
48
21.3
541
10.0
254
20.2
514
2.5
63
20
38.5
979
18.0
457
10.5
267
20.5
521
1.9
48
1.9
48
24.9
633
10.0
254
18.6
472
2.5
63
25
40.5
1028.0
19.4
494.0
10.5
267.0
20.5
521.0
2.2
56.0
2.2
56.0
27.6
700.0
10.0
254.0
19.4
494.0
2.8
71.0
- 59 -
made in
South
Africa
made in South
30ton-37ton
Li@ing Capacity
mt
T
30
37
33
40
6
6
H.P.
3.4
3.4
kW
2.5
2.5
lbs.
1350
1350
lbs.
1360
1360
lbs.
10
10
mm
16 x 45
16 x 45
PSI
87
87
bar
6
6
cfm
110
110
m3/min
1.75
1.75
1" BSP
3/4" (19mm - 25mm)
@. / min.
1
1
@. / min.
2
2
@. / min.
1.5
1.5
@.
10
10
@.
6.5
6.5
84 Dba @ 1m
A min. headroom
B
C
D
E1
E2
G maximum width
H
I
J (hook Width)
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
30
51.8
1315.0
24.4
619.5
10.7
271.0
20.9
532.0
3.1
80.0
3.1
80.0
32.9
835.0
10.3
261.0
25.1
637.1
3.0
75.0
- 60 www.elephantlifting.com
37
51.8
1315.0
24.4
619.5
10.7
271.0
20.9
532.0
3.1
80.0
3.1
80.0
32.9
835.0
10.3
261.0
25.1
637.1
3.0
75.0
Africa
made in
South
Africa
made in South
Africa
50ton
Hook Type
Monorail Type
50 ton
mt
T
H.P.
kW
lbs.
Weight with Pull Cord
lbs.
Weight with Pilot Pendant
lbs.
Chain Weight Per AddiKonal Foot of LiB
mm
Chain Dimension
PSI
Air Pressure
bar
cfm
Air ConsumpKon at Full Load
m3/min
Air Hose ConnecKon
Air Hose Dimension
B. / min.
LiBing Speed at Full Load
B. / min.
LiBing Speed without Load
B. / min.
Lower Speed with Full Load
B. / min.
Traversing speed with Full Load
B.
Standard LiB
B.
Length of Control for Standard LiB
Noise Level
Hook
Mount
Monorail
50
50
55
55
8
8
3.4 x 2
3.4 x 2
2.5 x 2
2.5 x 2
2050
2991
2057
2998
15
15
16 x 45
16 x 45
87
87
5 to 7
5 to 7
220
220
6.2
6.2
1.5" BSP
1" (19mm - 25mm)
1.8
1.8
3.2
3.2
4.5
4.5
NA
39
10
10
6.4
6.5
84 Dba @ 1m
A min. headroom
B
C
D
E
F
G maximum width
H
I
M (Block Width)
N
P
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
Hook
58
1475
23
587
13
331
23
587
4
100
4
114
32
818
10
256
29
727
12
300
28
710
18
450
Monorail
44
1120
61
1550
60
1534
12
313
6
151
4
100
32
819
10
256
13
331
13
340
13
340
9
225
- 61 -
made in
South
Africa
RIGGER SERIES
AIR CHAIN HOIST
LiBing Capacity
mt
T
1/1
2/2
3/3
4.2/4.2
5/5
3/6
1.1/1.1 2.2/2.2 3.3/3.3 4.6/4.6 5.5/5.5 3.3/6.6
Number of Fall of Chain
1
1
1
1
1
2
Motor Power Output
H.P.
1.9
1.9
2.4
3.3
3.3
3.3
kW
1.4
1.4
1.8
2.5
2.5
2.5
Weight with Pull Cord
lbs.
97
97
137
187
271
205
Weight with Pilot Pendant
lbs.
104
104
144
194
280
213
Chain Weight Per Addt'l Ft. of LiB
lbs.
3
3
5.2
5
8
10.4
Chain Dimension
mm
7x21
9x27 13 x 36 13 x 36 16 x 45 13 x 36
Air Pressure
PSI
87
87
72-102 72-102 72-102 72-102
bar
6
6
5-7
5-7
5-7
5-7
Air ConsumpWon at Full Load
cfm
60-75
60-75
110
110
110
110
m3/min 1.75
1.75
1.75
1.75
1.75
1.75
Air Hose ConnecWon
1" BSP
Air Hose Dimension
3/4" (19mm - 25mm)
LiBing Speed at Full Load
B. / min.
36
29
18.3
8.5
8.5
9.3
LiBing Speed without Load
B. / min.
45
43
23.75
9.8
18.3
13.1
Lower Speed with Full Load
B. / min.
36
45
25.4
11.4
24
14.3
Standard LiB
B.
10
10
10
10
10
10
Length of Control for Standard LiB
B.
6.5
6.5
6.5
6.5
6.5
6.5
Noise Level
84 Dba @ 1m
made in South
Africa
A min. headroom
B
C
D
E1
E2
G maximum width
H
I
J (hook Width)
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
1
ton
12.8
325
4.7
120
8.0
202
15.0
382
1.3
32
1.3
32
5.7
146
7.1
180
8.3
211
0.9
23
2
ton
12.8
325
4.7
120
8.0
202
15.0
382
1.3
32
1.3
32
5.7
146
7.1
180
8.3
211
0.9
23
3
ton
24.0
610
8.9
225
9.2
234
18.9
480
1.6
40
1.6
40
9.4
240
9.7
246
11.8
299
1.8
45
- 62 www.elephantlifting.com
4.2
ton
20.6
522
8.9
225
9.2
234
18.9
480
1.6
40
1.6
40
9.4
240
9.7
246
11.8
299
1.8
45
5
ton
28.7
729
12.6
320
10.5
267
20.5
521
1.7
42
1.7
42
13.4
340
10.0
254
18.9
480
2.1
53
6
ton
25.6
650
13.1
333
9.2
234
18.9
480
1.6
40
1.6
40
9.4
240
9.7
246
16.7
423
1.9
48
made in
South
Africa
made in South
Africa
LM
LOW PROFILE SERIES
0.5t-20t
UL & UUL
ULTRA LOW PROFILE SERIES
0.5t-20t
- 63 -
made in
South
Africa
made in South
Africa
mt
T
mt
T
lbs.
lbs.
lbs.
lbs. / @.
bar
cfm
cfm
kW
HP
kW
HP
m/min
@. / min
mm
inch
m
@.
mm
inch
mm
inch
dBA
ATSI-050
ATSI-1
ATSI-2
ATSI-3
TM2t
2
2.2
0.25
0.27
0.5
0.55
57
132
57
132
0.7
7 x 21
1
1
2
2.2
70
145
78
153
1.2
9 x 27
TM3t
3
3.3
3
3.3
82
130
212
1.8
11.2 x 34
95
110
75
1
4-6
50
60-75
- 64 www.elephantlifting.com
0.3
0.4
1.4
1.9
1.8
2.4
12
39
13
0.5
19
0.75
1.5
4.92
300
11.8
70
2.75
1.5
4.92
280
11
65
2.5
84
M
G
B D
HG
Designed by
Designed
Checked
byby
Approved
Checked
byby
Date by
Approved
Date
Date
21/02/2013
Date
21/02/2013
ATS PNEUMATICS
ATS PNEUMATICS
Edition
Sheet Edition
Sheet
MOTORIZED TROLLEY
MOTORIZED
REFERENCE
TROLLEY REFERENCE
1 / ATSI-050
1
1 / 1 ATSI-1
ATSI-025
A
B
C
d
D
E
F
G
H
J* (Lug Mount)
J* (Hook Mount)
K
L
M
N
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
TM2t
330
13
59
2.3
b + 24
b + 0.95
90
3.5
263
10.4
106
4.2
39
1.5
193
7.6
139
5.5
179
7
398
15.6
496
19.5
ATSI-2
104
4
42
1.7
193
7.6
182
7.1
395
15.5
505
19.8
122
4.8
4.8
23
0.9
0.9
23
0.9
0.9
157
62
62
ATSI-3
TM3t
330
13
59
2.3
b + 25
b + .98
90
3.5
266
10.5
206
8.1
30
1.2
234
9.2
189
7.4
490
19.2
692
27.2
122
4.8
30
1.1
40
1.6
157
62
- 65 -
made in
South
Africa
made in South
Africa
mt
T
mt
T
lbs.
lbs.
lbs.
lbs. / @.
ATSI-5
TM6t
6
6.6
5
5.5
119
162
281
3.8
16 x 45
4.2
4.6
160
279
2.5
13 x 36
ATSI-6
6
6.6
171
290
3.6
11.2 x 34
1
bar
cfm
cfm
kW
HP
kW
HP
m/min
@. / min
mm
inch
m
@
mm
inch
mm
inch
dBA
ATSI-10
TM10t
10
11
10
11
231
267
498
7.6
2
4-6
50
110
0.3
0.4
2.5
3.4
ATSI-15
ATSI-20
TM20t
20
22
15
16.5
20
22
463
518
981
11.4
16 x 45
3
683
1146
15.2
4
0.9
1.2
2.5
3.4
1.8
2.4
12
39
19
0.75
1.8
5.9
305
12
126
4.9
- 66 www.elephantlifting.com
3
9.8
on request
305
12
154
6
84
21/02/2013
21/02/2013
M
G
B D
HG
Designed by
Designed
Checked
byby
Date
Date
Date by
Approved
Approved
Checked
byby
Date
ATS PNEUMATICS
ATS PNEUMATICS
Edition
Sheet Edition
Sheet
MOTORIZED
TROLLEY
MOTORIZED
REFERENCE
TROLLEY REFERENCE
1 /ATSI-20
1
1/1
ATSI-5
ATSI-6
ATSI-10
ATSI-15
ATSI-4.2
A
B
C
d
D
E
F
G
H
J* (Lug Mount)
J* (Hook Mount)
K
L
M
N
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
15.75
2.8
b + 1
4.3
10.9
201
7.9
41
1.6
234
9.2
189
7.4
578
22.7
637
25
6
1.6
2
7.3
TM6t
400
15.75
71
2.8
b + 27
b + 1
109
4.3
277
10.9
243
9.6
39
1.5
271
10.6
194
7.6
645
25.3
719
28.3
154
6
40
1.6
51
2
185
7.3
TM10t
500
19.6
83
3.3
b + 25
b + .98
145
5.7
277
10.9
195
7.7
87
3.4
271
10.6
194
7.6
816
32.1
1000
39.3
131
5.2
53
2
46
1.8
236
9.3
15.75
2.8
b + 1
4.3
10.9
182
7.2
54
2.1
234
9.2
189
7.4
735
28.9
675
26.5
6
1.6
2
7.3
TM20t
1020
40.2
40.2
83
3.3
3.3
b + 25
b + .98
b + .98
145
5.7
5.7
277
10.9
10.9
351
228
13.8
9
176
115
6.9
4.5
271
321
10.6
12.6
204
259
8
10.1
950
995
37.4
39.1
1138
1280
44.8
50.3
131
5.2
5.2
58
78
2.3
3
52
65
2.1
2.6
236
9.3
9.3
- 67 -
made in
South
Africa
made in South
Africa
GRIPPA
BEAM
CRAWLS
- 68 www.elephantlifting.com
0.25t / 0.5t
Spark Resistant Units with 100% Stainless Steel Side Plates, Solid Bronze
Wheels, and Solid Stainless Wheels are Available Upon Request
BEAM CRAWLS
250
kg
550
lbs
500
kg
1100
lbs
1.97-2.95
2.99-5.63
-
5.91
9.45
-
1.97-2.95
2.99-5.63
-
5.91
9.45
-
6.38
7.87
10.08
12.99
13.11
15.04
19.69
40.16
47.2
70
1.77
2.17
2.56
3.54
3.54
4.33
5.71
5.71
6.3
9.8
4.13
4.25
3.15
3.5
4.49
4.49
9.37
10.16
ON REQUEST
ONLY
ON REQUEST
ONLY
0.47
0.59
0.87
0.83
0.94
0.87
2.87
2.68
13.7
ON REQUEST
ONLY
5.31
5.43
5.43
5.67
9.06
9.06
ON REQUEST
ONLY
ON REQUEST
ONLY
0.71
0.71
0.75
0.98
0.98
1.18
1.89
1.89
ON REQUEST
ONLY
ON REQUEST
ONLY
9.84
ON REQUEST
ONLY
ON REQUEST
ONLY
ON REQUEST
ONLY
196
392
ON REQUEST
ONLY
ON REQUEST
ONLY
R1
R2
R3
R1
R2
R3
1
1.1
2
2.2
3
5
3.3
5.5
DIMENSIONS
(in)
10
11
15/20
16.5/22
32
35
50
50
- 69 -
made in
South
Africa
Africa
GS Pin Type
GH Shackle Type
R-ADJUSTABLE
BEAM
CRAWLS
SPECifications & dimensions- GRIPPA - QUICK Adjust RIGGER STYLE beam crawls
S.W.L.
(mt)
S.W.L.
(ton)
TYPE
1
1.1
GS
2
2.2
GH
GS
3
3.3
GH
GS
DIMENSIONS
(in)
5
5.5
GH
GS
6
6.6
GH
GS
GH
2.76-10.63
2.95-10.63
4.13-11.81
4.33-11.81
4.33-11.81
20.08
20.47
20.87
22.05
22.05
10.24
12.99
12.99
14.96
14.96
2.56
3.54
3.54
4.33
4.33
8.27-5.12
11.02-8.27
7.48-4.72
11.02-8.27
9.06-6.69
13.39-10.63
9.84-6.69
14.17-11.02
9.84-6.69 14.17-11.02
1.97
1.38
2.56
2.76
2.76
5.51
5.51
5.71
5.71
5.71
0.75
0.8
0.98
1.18
1.18
4.92
4.98
4.92
5.91
5.91
WEIGHT (lbs)
27
43
57
84
84
- 70 www.elephantlifting.com
made in
South
Africa
Africa
1
1.1
2
3
2.2
3.3
DIMENSIONS
(in)
1.77-11.02
2.56-11.02
2.76-11.81
3.54-11.81
17.38
17.72
18.11
19.09
10.24
12.99
12.99
15.16
2.56
3.54
3.54
4.33
5.91
5.91
7.48
8.66
1.77
1.18
1.38
1.77
5.51
5.51
5.51
5.71
0.75
0.98
0.98
1.18
4.92
4.92
4.92
5.91
21
41
51
76
5
5.5
- 71 -
made in
South
Africa
GIRDER CLAMPS
made in South
Africa
APERTURE
MODEL
GS1
GS2
GS3
GS5
GS10
GS20
GS32
GH1
GH2
GH3
GH5
GH10
GH20
2200
4400
6600
11 000
22 000
44 000
70 500
2200
4400
6600
11 000
22 000
44 000
WIDTH
"A"
"B" MAX
W1
W2
2.9-7.1
2.9-9.8
3.3-11.8
4.7-16.9
7.8-17.7
7.8-18.9
9.0-30.0
2.9-7.1
2.9-9.8
3.3-11.8
4.7-16.9
7.8-17.7
7.8-18.9
7.1
9.8
11.8
16.9
17.7
18.9
29.13
7.1
9.8
11.8
16.9
17.7
18.9
1.7
2.2
2.3
2.3
3.9
4.6
9.0
2.64
3.35
3.74
3.94
6.69
7.28
3.5
4.0
5.1
5.2
8.6
9.4
15.7
3.54
4.13
5.12
6.1
8.86
9.45
- 72 www.elephantlifting.com
"C"
0.6
0.8
0.9
1.1
2.3
3.1
3.8
1.38
1.97
2.95
2.95
4.72
4.72
Request
"D"
Beam
WEIGHT
Aperture
(lbs)
(in)
11
0.6
13
0.7
22
0.9
38
1.2
126
2.3
137
2.7
393
3.1
13
0.63
15
0.71
24
0.87
42
1.25
135
2.95
139
2.95
MONORAIL
MONORAIL
CONSTRUCTION
CONSTRUCTION
CLAMP CLAMP
made in
South
Africa
CONSTRUCTION
CONSTRUCTION
CLAMP
CLAMP
made in South
Africa
MONORAIL
CONSTRUCTION
CLAMP
90 FIXED POSITION
MODEL
90 FIXED FDE
POSITION
90 FIXED POSITION
MODEL
FDE2
FDE3
FDE5
S.W.L.
(kg)
2000
MODEL
3000
FDE
2
5000
FDE
3
FDE 5
FDE 5
5000
5000
AND HEIGHTAND
POSITION
HEIGHT POSITION
MODEL
S.W.L.
kg) S.W.L.
MODEL
ADE(MODEL
ADE(lbs) WEIGHT
(lbs)
ADE2
2000
4400
MODEL
MODEL
SWL (KG)
SWL (KG)
6600 2000
ADE 2 ADE3 ADE 23000 2000
11 0003000
ADE 3 ADE5 ADE 35000 3000
5000
5000
ADE 5
ADE 5
29
45
80
Conforms to CSIR tests: Endurance Test 60,000 Cycles at 1.5 x SWL and Factor of Safety Min 4 x SWL
Conforms to CSIR
Conforms
tests: Endurance
to CSIR tests:
TestEndurance
60 000 Cycles
Test 60
at 1,5
000xCycles
SWL and
at 1,5
Factor
x SWL
of Safety
and Factor
Min 4ofx Safety
SWL Min 4 x SWL
DISTRIBUTED BY
DISTRIBUTED BY
S.W.L.
(kg)
3000
S.W.L.
(lbs)
6600
APERTURE
WIDTH
HOLE "C"
WEIGHT
(lbs)
12
Conforms to CSIR tests: Endurance Test 60,000 Cycles at 1.5 x SWL and Factor of Safety Min 4 x SWL
- 73 -
BEAM CLAMPS
MADE IN CHINA
D
F
G
E
The eye beam clamp can be used as an anchor for various applications and for any type of
construction. The zinc plated clamp screw assembly allows for easy adjustment of the clamp.
This clamp features metric capacities that range from 1, 2, 3, 5, and 10 tons.
Model
S.W.L.
(lbs)
S.W.L.
US ton
Weight
(lbs)
A
B
Dimensions
C
(in)
D
E
F
G
M
Capacity
Dimensions
H
EBC-1
2200
1.1
11
3.1-9.6
7.2-14.7
2.6
0.7
8.3
4-6.4
0.98
1.10
EBC-2
4400
2.2
12
3.1-9.6
7.2-14.7
2.9
0.7
8.3
4-6.4
0.98
1.1
EBC-3
6600
3.3
24
3.5-12.2
9.4-20.4
4.1
1.1
10.2
5.3-8.8
1.77
1.7
EBC-5
11000
5.5
28
3.5-12.2
9.4-20.4
4.4
1.1
10.2
5.3-8.8
1.77
1.7
EBC-10
22000
11
45
3.5-11.8
9.8-20.4
4.7
1.1
11
6.2-9
1.97
2.3
1T
18mm
2T
18mm
3T
30mm
5T
30mm
10T
30mm
- 74 www.elephantlifting.com
BEAM CLAMPS
MADE IN CHINA
S.W.L.S.W.L.Beam Width
(lbs.) US Ton (inch)
A
JBC-3
6600 3.3 3.50-12.00 ###
JBC-3A 6600 3.3 3.00-7.48 ###
JBC-5A ##### 6
6.00-12.00 ###
JBC-5B ##### 6
3.00-7.48 ###
JBC-6
##### 7
8.00-18.00 ###
JBC-10 ##### 11
8.00-18.00 ###
JBC-10S ##### 11
3.5-12.00 ###
JBC-16A ##### 17.6 16.00-24.00 ###
JBC-16B ##### 17.6 8.00-18.00 ###
Type
B
###
###
###
###
###
C
###
###
###
###
###
###
###
20
20
###
###
51
51
Dimensions (inch)
D E max G
H
### 16.46 #### ###
### 10.71 #### ###
### 17.72 #### ###
### 13.39 #### ###
### 23.62 #### ###
The Jumbo Beam Clamp is a great option for rigging applications. This clamp line features a wide jaw opening for
wide flange beams used throughout industry. The JBCs clamp screw assembly is also zinc plated. This clamp
series features metric capacities that range from 3, 5, 6, 10 and 16 tons.
Type
JBC-3A
JBC-5A
JBC-5B
JBC-6
JBC-10
JBC-16A
JBC-16B
3.3
5.5
5.5
6.6
11
17.6
17.6
3.00-7.48
6.00-12.00
3.00-7.48
8.00-18.00
8.00-18.00
16.00-24.00
8.00-18.00
5.12
5.50
5.50
6.60
5.51
6.89
6.89
0.55
0.55
0.55
0.55
0.79
0.79
0.79
1.06
1.81
1.81
2.17
2.17
2.01
2.01
Dimensions
(inch)
D E
max G
H
4.21
4.80
4.80
4.57
4.69
5.12
5.12
10.71
17.72
13.39
23.62
23.62
24.02
17.99
10.87
16.10
13.35
22.01
22.01
31.89
25.98
0.79
0.98
0.98
0.98
1.26
1.77
1.77
###
###
###
###
23.62
13.70
610
457
K min
3.35
3.90
3.90
3.90
3.90
7.87
7.87
10.00
12.56
12.99
16.46
16.46
25.75
22.60
####
####
810
660
###
###
45
45
###
###
###
###
16.46
15.39
654
574
Fixed
Swivel
Fixed
Fixed
62
49
141
119
18
33
22
42
62
135
119
SIDE LOAD ACROSS BEAM ONLY - CLAMP MUST BE FLUSH ON BEAM WITH SHACKLE AT A ZERO DEGREE DOWNWARD FACING ANGLE
Model
JBC-10
0
NIL
0 to 15
17.00%
15 to 30
34.00%
30 to 45
50.00%
WLL
3 ton
5 ton
6 ton
10 ton
WLL
2.5 ton
4.1 ton
5 ton
8.3 ton
WLL
2 ton
3.3 ton
4 ton
6.6 ton
WLL
1.5 ton
2.5 ton
3 ton
5 ton
- 75 -
made
in
Japan
WF
SCREW TYPE
C
L
A
M
P
OMNIDIRECTIONAL
DOUBLE CAM LOCK
SCREW TYPE CLAMP
- 76 www.elephantlifting.com
Model
Capacity
(t)
Min. Capacity
(t)
Jaw Opening
(in)
Weight
(lbs)
WF-0.5
0.5
0.1
.003-1.10
3.7
WF-1
1.0
0.2
.003-1.57
6.4
WF-2
2.0
0.4
.003-1.77
11.7
WF-3
3.0
0.6
.24-1.93
15.8
WF-5
5.0
1.0
.35-2.08
23.4
WF-0.5
1.61
1.26
1.20
0.83
1.30
4.25
5.43
0.94
1.65
3.86
0.98
0.98
0.47
0.63
4.72
0.39
1.02
0.83
WF-1
2.11
1.50
1.67
0.98
1.57
5.20
6.77
1.18
1.97
4.65
1.18
1.18
0.63
0.79
4.72
0.47
1.34
1.42
WF-2
2.36
1.77
1.87
1.22
1.61
6.18
7.95
1.42
2.44
4.96
1.38
1.38
0.87
1.10
5.91
0.47
1.42
1.14
WF-3
2.58
2.05
2.03
1.38
2.17
6.69
9.06
1.65
2.76
5.47
1.65
1.65
1.10
1.30
6.30
0.47
1.57
1.42
WF-5
2.80
2.24
2.19
1.50
1.81
7.36
9.76
1.89
2.95
5.39
1.81
1.81
1.50
1.57
7.09
0.47
1.61
1.42
= Diameter
- 77 -
made
in
BULK CHAIN
Japan
CORROSION
CORROSION
RESISTANT
+V
Class
"WHITE"
RESISTANT
LOAD
CHAIN
+VCLASS WHITE
LOAD CHAIN
Mechanical ProperJes
- 78 -
ISO
16872:2008
ELEPHANT
+V
(plus
V)
load
chain
Grade
VH,
ne
tolerance
chain
100
105
Min. 17.0
Min. 22.0
32
W.L.L.
(lbs)
1102
2205
2205
2205
3527
3527
4409
4409
7054
7054
www.elephantlifting.com
Hand Chain
High quality hydraulic cylinder made for long life and durability.
Two stage, quick acting hand pump for speed and ease of
operation.
Fine adjustment pressure valve for accurate load testing.
Large pressure gauge for easy reading.
Software template for technical printout of test results.
Hydraulic pump located on the side for safe operation.
- 79 -
Warranty
All hoists sold by Elephant Lifting Products, L.L.C. are assembled, inspected,
and tested prior to shipment from the factory site.
All manual hoist products, manual trolleys, and beam / girder clamps
carry a 1 year warranty. All pneumatic and electric hoist products have
a 1 year warranty period. Spare parts will also carry a 1 year warranty
period. These products are warranted to be free from defects in workmanship
and in materials used in the construction of each unit. The warranty date of
these products begins from the date of shipment by any authorized Elephant
Lifting Products, L.L.C. distributor.
All of these hoist products must be used within accordance of the
manufacturers recommendations. It is important that these products not
be altered, abused, misused, neglected of proper maintenance, or have any
unauthorized repairs done to them. If failure occurs, and inspection reveals
that the problem is caused by defective materials or workmanship, repairs
will be made without charge to the customer. A customer must obtain an
RGA number before return. Elephant Lifting Products will then instruct
which authorized repair center the unit and / or units should be shipped
to. All approved warranty claims on products will be shipped back to the
customer, freight prepaid. Warranty does not cover products that are abused,
overloaded, neglected of maintenance, used improperly, side loaded, shock
loaded, or subjection to harmful environmental conditions.
Elephant Lifting Products, L.L.C. will not be liable for loss, damage, expense,
injury to property, injury to people, death, any consequential damages and
disclaims any other expressed / implied product warranty, including warranties
of merchant ability and fitness for a particular application. A valid proof of
purchase must accompany the warranty claim.
Elephant Lifting Products, LLC 2718 B. South Ruby Ave Gonzales, LA 70737-5134
Toll Free: (888) 844-6113 Phone: (225) 644-6113 Fax: (225) 644-6695
www.elephantlifting.com