F2X03 Series user manual is suitable for the following model:. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome.
F2X03 Series user manual is suitable for the following model:. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome.
F2X03 Series user manual is suitable for the following model:. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome.
The user manual is suitable for the following model:
Model Product Type F2003 GSM IP MODEM F2103 GPRS IP MODEM F2203 CDMA IP MODEM F2303 EDGE IP MODEM F2403 WCDMA IP MODEM F2503 TD-SCDMA IP MODEM F2603 EVDO IP MODEM Xiamen Four-Faith Communication Technology Co., Ltd. AddJ1-J3,3rd Floor,No.44,GuanRi Road,SoftWare Park,XiaMen,China Zip Code:361008 Tel+86 592-6300326 63003256300324 Fax:+86 592-5912735 http://www.fourfaith.com Skype: ianfourfaith Email: ian@four-faith.com User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 2 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Files Revised Record Date Version Remark Author User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 3 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Copyright Notice All contents in the files are protected by copyright law, and all copyrights are reserved by Xiamen Four-Faith Communication Technology Co., Ltd. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome. Trademark Notice Four-Faith are all registered trademarks of Xiamen Four-Faith Communication Technology Co., Ltd., illegal use of the name of Four-Faith, trademarks and other marks of Four-Faith is forbidden, unless written permission is authorized in advance. User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 4 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 5 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Contents Contents Chapter 1 Brief Introduction of Product............................................................................................. 6 1.1 General.................................................................................................................................. 6 1.2 Features and Benefits............................................................................................................ 6 1.3 Working Principle................................................................................................................. 7 1.4 Specifications........................................................................................................................ 7 Chapter 2 Installation Introduction................................................................................................... 10 2.1 General................................................................................................................................ 10 2.2 Encasement List.................................................................................................................. 10 2.3 Installation and Cable Connection...................................................................................... 10 2.4 Power...................................................................................................................................12 2.5 Indicator Lights Introduction.............................................................................................. 12 Chapter 3 Configuration....................................................................................................................13 3.1 Configuration Connection...................................................................................................13 3.2 Configuration Introduction................................................................................................. 13 3.3 Run the configure Tool: IP Modem Configure.exe............................................................ 14 3.4 Re-power IP MODEM........................................................................................................ 14 3.5 Configuration...................................................................................................................... 15 3.5.1 Data Service Center Settings................................................................................... 15 3.5.2 IP MODEM Settings................................................................................................ 17 3.5.3 Other Settings...........................................................................................................23 3.6 Functions............................................................................................................................. 26 3.7 Work State Switch...............................................................................................................27 Appendix........................................................................................................................................... 28 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 6 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Chapter 1 Brief Introduction of Product 1.1 General F2X03 series IP MODEM is a kind of cellular terminal device that provides data transfer function by public cellular network. It adopts high-powered industrial 16/32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on. 1.2 Features and Benefits Design for Industrial Application High-powered industrial cellular module High-powered industrial 16/32 bits CPU Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional) Housing: iron, providing IP30 protection. Power range: DC 5~35V Stability and Reliability Support hardware and software WDT Support auto recovery mechanism, including online detect, auto redial when offline to make it always online RS232/RS485/RS422 port: 15KV ESD protection SIM/UIM port: 15KV ESD protection Power port: reverse-voltage and overvoltage protection Antenna port: lightning protection(optional) Standard and Convenience User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 7 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly Support intellectual mode, enter into communication state automatically when powered Provide management software for remote management Support several work modes Convenient configuration and maintenance interface High-performance Support TCP server and support multi TCP client connection(optional) Support double data centers, one main and another backup Support multi data centers and it can support 5 data centers at the same time Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout Support dynamic domain name(DDNS) and IP access to data center Design with standard TCP/IP protocol stack Support APN/VPDN 1.3 Working Principle The principle chart of the IP MODEM is as following: 1.4 Specifications Cellular Specification Standard and Band Bandwidth TX power RX sensitivity F2103 GPRS IP MODEM EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional) 85.6Kbps GSM850/900 <33dBm GSM1800/1900 <-107 dBm Embedded processing system Cellular Module Power RS232 serial Interface Indicator lights DATAInterface User interface RS485 serial Interface User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 8 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 <30dBm F2203 CDMAIP MODEM CDMA2000 1xRTT 800MHz 800/1900MHz(optional) 450MHz(optional) 153.6Kbps <30dBm <-104 dBm F2303 EDGE IP MODEM GSM850/900/1800/1900MHz GPRS/EDGE Class 12 236.8Kbps GSM850/900 <33dBm GSM1800/1900 <30dBm <-106 dBm F2403 WCDMA&HSDPA&HSUPAIP MODEM UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz, 850/900/1900/2100MHz(optional) GSM850/900/1800/1900MHz GPRS/EDGE CLASS 12 HSUPA:5.76Mbps (Upload speed) HSDPA:7.2Mbps (Download speed) UMTS:384Kbps (DL/UL) <24dBm <-109 dBm F2503 TD-SCDM IP MODEM TD-SCDMA/HSDPA/HSUPA 1880-1920/2010-2025MHz GSM850/900/1800/1900MHz GPRS/EDGE CLASS 12 Download speed:2.8Mbps Upload speed:2.2Mbps <24dBm <-108 dBm F2603 CDMA2000 1X EVDO IP MODEM CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional) 450MHz (optional) CDMA2000 1X RTT, IS-95 A/B Download speed:3.1Mbps Upload speed:1.8Mbps <23dBm <-104 dBm Hardware System Item Content CPU Industrial 16/32 bits CPU FLASH 1MB(Extendable) SRAM 512KB(Extendable) Interface Type Item Content Serial 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 9 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps Indicator "Power", "ACT", "Online" Antenna Standard SMA female interface, 50 ohm, lighting protection(optional) SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection Power Input Item Content Standard Power DC 12V/0.5A Power Range DC 5~35V Consumption <250mA (12V) Physical Characteristics Item Content Housing Iron, providing IP30 protection Dimensions 91x58.5x22 mm Weight 205g Environmental Limits Item Content Operating Temperature -25~+65C-13~+149 Extended Operating Temperature -30~+75C-22~+167 Storage Temperature -40~+85C-40~+185 Operating Humidity 95% ( Non-condensing) User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 10 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Chapter 2 Installation Introduction 2.1 General The IP MODEM must be installed correctly to make it work properly. Warning: Forbid to install the IP MODEM when powered! 2.2 Encasement List Name Quantity Remark IP MODEM host 1 Antenna 1 Power adapter 1 RS232 data cable 1 optional RS485 data cable 1 optional Manual CD 1 Certification card 1 Maintenance card 1 2.3 Installation and Cable Connection Dimension: (unit: mm) User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 11 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 58.5 35 28 28 22 8 25 3 5 4 Installation of SIM/UIM card: Firstly power off the IP MODEM, and press the out button of the SIM/UIM card outlet with a needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into the card sheath (Pay attention to put the side which has metal point outside), and insert card sheath back to the SIM/UIM card outlet. Warning: Forbid to install SIM/UIM card when powered! Installation of antenna: Screw the SMA male pin of the antenna to the female SMA outlet of the IP MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced! Installation of cable: Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP MODEM, and connect the other end with users device. The signal connection of the RS232 data cable is as follows: DB9F DB9F RS232 data cable 1 RXD 2 TXD 3 4 GND 5 6 7 8 9 1 2 RXD 3 TXD 4 5GND 6 7 8 9 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 12 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 The signal connection of the RS485 data cable is as follows: 2.4 Power The power range of the IP MODEM is DC 5~35V Warning: When we use other power, we should make sure that the power can supply power above 4W. We recommend user to use the standard DC 12V/0.5Apower adaptor. 2.5 Indicator Lights Introduction The IP MODEM provides three indicator lights: Power, ACT, Online. Indicator Light State Introduction Power ON IP MODEM is powered on OFF IP MODEM is powered off ACT BLINK Data is communicating OFF No data Online ON IP MODEM has logged on network OFF IP MODEM hasnt logged on network DB9F RS485 data cable 1 2 3 4 5 A 6 7 8 B 9 A(RED) B (BLACK) User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 13 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Chapter 3 Configuration 3.1 Configuration Connection Before configuration, its necessary to connect the IP MODEM with the configure PC by the shipped RS232 or RS232-485 conversion cable as following. 3.2 Configuration Introduction There are two ways to configure the IP MODEM: Configuration software tool: All the settings are configured through the shipped software tool. Its necessary to have one PC to run this tool. Extended AT command: All the settings are configured through AT command, so any device with serial port can configure it. Before configuration with extended AT command, you should make IP MODEM enter configure state. The steps how to make IP MODEM enter configure state, please refer to appendix. The following describes how to configure IP MODEM with the configure software tool. At the same time, it gives out the corresponding AT command of each configuration item. User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 14 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 3.3 Run the configure Tool: IP Modem Configure.exe The Serial Parameters column shows the current serial port settings. To configure IP MODEM, please choose the correct serial port which connects to IP MODEM, and the baudrate is 115200 with no parity, then open the serial port. If the button text is Close, it shows the serial port now has been opened. If the text is Open, you should open the port first. When the port opened, the Output Info column will display Port(COM1) Has OpenedPlease Re-Power the IP MODEM, Waiting IP MODEM Enter Configure State... 3.4 Re-power IP MODEM After Re-power IP MODEM, The configure tool will make it enter configure state. At the same User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 15 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 time, the software will load current settings from IP MODEM and displays on the right configure columns. Its now ready to configure. 3.5 Configuration 3.5.1 Data Service Center Settings Settings on this page are the parameters related to Data Service Center(DSC). Data Center Number IP MODEM support two Data Service Center methods to transmit data. Main and Backup: IP MODEM always tries to connect with the Main DSC. If fails to connect with Main DSC, it will connect with Backup DSC at once NoteIf no Backup DSC exists, please configure the Backup DSC same as Main DSC. Multi Data Service Center: IP MODEM can connect with at most five DSC at the same time. All the multi DSC can receive the same application data . If the Data Center Number is 1, IP MODEM work in Main and Backup DSC method. When Data Center Number is greater than 1, IP MODEM works in Multi Data Service Center method AT command: AT+SVRCNT=x x: Data Service Center number Note: every AT command is terminated with a enter character. Main Center Addr+Port: IP Address and Port of the Main DSC, Its better to set the port greater than 1024. AT command of the Main DSC IP address or domain name: AT+IPAD=xxx User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 16 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 xxx: The IP address or domain name. AT command of the Main DSC port: AT+PORT=xxx xxx: The port value Backup Center Addr+Port: IP address and port of the Backup DSC AT command of the Backup DSC IP address or domain AT+IPSEC=xxx xxx: The IP address or domain name AT command of the Backup DSC port AT+PTSEC=xxx xxx: The port value Multi DSC Configuration When Data Center Number is greater than 1, this setting is valid. For examplesetting the Data Center Number as 3, Main Center, 2nd Center, 3rd Center work as these three DSC AT Command of the 2~5 DSC IP address or domain name AT+IPADn=xxx n is 1~4 correspond to center 2~5 xxx: The IP address or domain name AT Command of the 2~5 DSC port AT+PORTn=xxx n is 1~4 correspond to port of center 2~5 xxx: The port value Example: Set IP address of center 3 as 166.111.8.238, and port 5001, the AT command is as following: AT+IPAD2=166.111.8.238 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 17 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 AT+PORT2=5001 Main and Backup Center DNS Server When the DSC Internet access uses domain name, Its necessary to set DNS server resolving the DSC domain name. When the Data Center Number is 1, Main and Backup Center DNS Server is used to resolve the Main center and Backup center correspondingly. AT command of Main Center DNS server: AT+DNSSVR=aaa.bbb.ccc.ddd aaa.bbb.ccc.ddd: The DNS server IP address(must be IP address. AT command of Backup Center DNS server: AT+DNSSV2=aaa.bbb.ccc.ddd aaa.bbb.ccc.ddd: the DNS server IP address Center 2~5 DNS Server When the IP MODEM work in Multi Data Service Center method and the centers use domain name, 2~5 DNS server is used to resolve center 2~5 correspondingly. AT command of 2~5 DNS Server AT+DNSSVRn=aaa.bbb.ccc.ddd n is 1~4 correspond to center 2~5 DNS server. aaa.bbb.ccc.ddd is the DNS server IP address 3.5.2 IP MODEM Settings IP MODEM WorkMode User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 18 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 According to different application requirements, there are several protocol workmode to choose. PROT Heartbeat packet with TCP protocol, Data transmission with TCP protocol, heartbeat packet and application data transmission are in the same TCP connection. TRNSIP MODEM work as a common GPRS MODEM, It can be used in SMS, CSD, dial-up applications. TTRNHeartbeat packet with UDP protocol, Data transmission with TCP protocol TLNTIP MODEM work as a telnet client LONGHeartbeat packet with UDP protocol, Data transmission with TCP protocol, It can transmit at most 8192 bytes data one time through extra application protocol. LNGTHeartbeat with TCP protocol, Data transmission with TCP protocol, It can transmit at most 8192 bytes data one time through extra application protocol. TUDPHeartbeat with UDP protocol, Data transmission with UDP protocol, Heartbeat packet and application data are in the same UDP connection. TCSTUser can set custom register and heartbeat string, Data transmission with TCP protocol. AT command: AT+MODE=xxxx xxxx: one of the above workmode Trigger Type Normally, IP MODEM always keeps online and always be ready for data transmission. But in some circumstances, its important to reduce wireless data flow. To realize this function, the software can makes IP MODEM into sleep state in idle time. When there is application data to transmit, IP MODEM can be triggered online ready for data transmission. There are total five methods to make IP MODEM online: AUTO: IP MODEM always keeps online SMSD: send a special short message to make IP MODEM online CTRL: make IP MODEM online through a phone call to IP MODEM DATA: send special serial data to make IP MODEM online MIXD: the combination of SMSD, CTRL, DATA. IP MODEM will be online when meet one of these three trigger methods. User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 19 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 AT Command: AT+ACTI=xxxx xxxx: one of the above trigger methods Debug Level Debug information is used to debug software when there is software problem. 0 --- no debug information output 1 --- simple prompt information output 2 --- detail debug information output AT Command: AT+DEBUG=x x : the debug level value Note: Only there is some problem to the IP MODEM, Its necessary to set this value as 2, In normal applications, this value should set to 0 or 1, the default value is 1. Databit, Parity, Stopbit 8N1 --- 8 Databit, No parity, 1 Stopbit 8E1 --- 8 Databit, Even parity, 1 Stopbit 8O1 --- 8 Databit, Odd parity, 1 Stopbit AT Command: AT+SERMODE=xxx xxx: one of the above serial mode Communication Baudrate User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 20 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 110 --- 110 bps 300 --- 300 bps 600 --- 600 bps 1200 --- 1200 bps 2400 --- 2400 bps 4800 --- 4800 bps 9600 --- 9600 bps 14400 --- 14400 bps 19200 --- 19200 bps 38400 --- 38400 bps 56000 --- 56000 bps 57600 --- 57600 bps 115200 --- 115200 bps AT Command: AT+IPR=xxx xxx : one of the above baudrate Auto Back To Main Server 0 --- No 1 ---Yes This item is only valid when you set Data Center Number as 1. In this mode, IP MODEM will switch to backup center when main center have problems. If this item is set to 1 , IP MODEM will check whether the main center work fine timely. When it detects the main server work fine, it will return back to the main server at once. AT Command: AT+RETMAIN=x x : 0 or 1 Device ID The identity number of IP MODEM, the value should be 8 bytes hex-decimal characters. User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 21 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 AT Command: AT+IDNT=aabbccdd aabbccdd: the identity number of IP MODEM SIM Card No The phone number of the SIM card . AT Command: AT+PHON=xxxxxxxxxx xxxxxxxxxxx: the SIM card phone number Bytes Interval The time interval used to determine whether the serial data frame transmission has completed, IP MODEM will send the serial data to the center when two bytes transmit time interval larger than this item value. AT Command: AT+BYTEINT=xxx xxx: bytes interval time valuemillisecond Custom Register String This item is only valid when the WorkMode is TCST. Its the self defined register string. It can be empty, the maximum length is 70 bytes. AT Command: AT+CONNRGST=xxx xxxself defined register string User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 22 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Custom Heartbeat String This item is only valid when the WorkMode is TCST. Its the self defined heartbeat string, It can be empty, the maximum length is 70 bytes. AT Command: AT+LINKRGST=xxx xxxself defined heartbeat string Connect Retry Times, Reconnect Time Interval In normal applications, IP MODEM will always try to connect with the center even if the center has problems or closed. To reduce these unnecessary wireless data flow, you can configure the Connect Retry Times and Reconnect Time Interval items. When IP MODEM fail to connect to the center with the configured Retry Time, It will sleep Reconnect Time Interval time, then start next retry. Connect Retry Times AT Command: AT+RETRY=xxx xxxtimes try to connect to the center Reconnect Time Interval AT Command: AT+RDLWT=xxx xxx: the sleep time until next retry. Transfer meanning 0 --- Yes, enable transfer meaning 1 --- No, disable transfer meaning User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 23 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 This item is only valid when the WorkMode is PROT. If this item is set to 0, IP MODEM will transfer meaning to 0xfd and 0xfe. To know detail transfer meaning method, please refer <<IP MODEM Transfer Meaning Explanation In the PROT work mode>>. If this item is set to 1, all the transmission is transparent. AT Command: AT+STRAIGHT=x x0 or 1 3.5.3 Other Settings Network Note: Model APN Username and password Call center F2103 Cmnet null *99***1# F2203 null card #777 F2303 cmnet null *99***1# F2403 3gnet null *99# F2503 cmnet null *98*1# F2603 null card #777 APN: access point name. Username: username to login the ISP network. Password: password to login the ISP network Call Center: the call center phone number AT Command of APN: AT+APN=xxxx xxxx: access point name AT Command of Username: AT+USERNAME=xxx User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 24 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 xxx username AT Command of Password: AT+PASSWORD=xxx xxx password AT Command of Call Center: AT+CENT=xxx xxx: call center phone number of ISP SMS Center Your local SMS center number AT Command: AT+SMSC=xxx xxx: your local SMS center number Heartbeat Interval Time interval sent heartbeat packet. (unit is second) AT Command: AT+POLLTIME=xxx xxx: heartbeat packet time interval Call Trigger Phone No This item is only valid when the Trigger Type is CTRL or MIXD. In this trigger type, IP MODEM will keeps in idle state until it receives the trigger phone call, then it will connect to the center. User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 25 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 AT Command: AT+CTRLNO=xxx xxx : trigger phone number SMS Trigger Password This item is valid only when the Trigger Type is SMSD or MIXD, IP MODEM will keeps in idle state until it receives the trigger short message, Then it will connect to the center. AT Command: AT+SMSDPSWD=xxx xxx : SMS content to trigger IP MODEM online Data Trigger Password This item is valid only when the Trigger Type is DATA or MIXD, IP MODEM will keeps in idle state until it receives the trigger on data, then it will connect to the center, It will return to the idle state when receives trigger off data. AT Command of Data Trigger On Password: AT+DONPSWD=xxx xxx : data trigger on password AT Command of data trigger off password: AT+DOFFPSWD=xxx xxx :data trigger off password TCP MTU The maximum transmission unit of TCP packet User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 26 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 AT Command: AT+TCPMTU=xxx xxx : the MTU value Multi Center Reconnect Interval This item is valid only when the Data Center Number is greater than 1. When one of the configured data center lost connection, IP MODEM will try to reconnect after the configured reconnect interval AT Command: AT+MCONTIME=xxx xxx : reconnect time interval (unit is second) 3.6 Functions Clear Output Clear the output information Version Display Show the software and hardware version Signal Value Display current wireless signal value Factory setting Restore to factory settings Show Config Show current IP MODEM settings Show Baudrate User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 27 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Display the communication baudrate Auto Detect Simple way to determine whether IP MODEM work fine Save Output Save the output info to a file Save Config Save the current settings to a file, you can restore it from this file later Restore Config Restore settings from a previous saved configure file 3.7 Work State Switch This tool can work in two states, Config and Communication Config: This state is used to configure parameters of IP MODEM. Communication: This state is used as a common serial communication tool Reboot Device, Enter Communication State: This function button is used to reboot IP MODEM and make the software switch to Communication state User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 28 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Appendix The following steps describe how to make IP MODEM enter configure state with the Windows XP Hyper Terminal. 1. Press StartProgramsAccessoriesCommunicationsHyper Terminal 2. Input connection name, choose OK 3. Choose the correct COM port which connect to IP MODEM, choose OK 4. Configure the serial port parameters as following, choose OK Bits per second: 115200 User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 29 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 Data bits: 8 Parity: None Stop bits: 1 Flow control: None 5. Complete Hyper Terminal operation, It runs as following 6. Re-power IP MODEM, put mouse focus on the Hyper Terminal and press s key continuously until IP MODEM enter configure state as following User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 30 of 30 Add J1-J3,3 rd Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//www.fourfaith.com Tel +86 592-6300326 6300325 6300324 Fax+86 592-5912735 7. IP MODEM has entered configure state, you can configure the parameters through AT command.