ENERCALC, INC. 1983-2011, Build:6.11.6.23, Ver:6.11.6.23
Licensee : Lic. # : File: P:\7) Boccella Residence\Calculations\Enercalc\ROOF BEAMS.ec6 Description : RB39 Material Properties Beam Bracing : Calculations per NDS 2005, IBC 2009, CBC 2010, ASCE 7-05 Beam bracing is defined as a set spacing over all spans Allowable Stress Design iLevel Truss J oist Parallam PSL 2.0E 2,900.0 2,900.0 2,900.0 750.0 2,000.0 1,016.54 290.0 2,025.0 32.210 Analysis Method : Eminbend - xx ksi Wood Species : Wood Grade : Fb - Tension psi psi Fv psi Fb - Compr Ft psi Fc - Prll psi psi Fc - Perp E : Modulus of Elasticity Ebend- xx ksi Density pcf Load Combination :2009 IBC & ASCE 7-05 Unbraced Lengths First Brace starts at ft from Left-Most support Regular spacing of lateral supports on length of beam =1.330 ft 3.5x11.875 Span =20.330 ft D(0.28) Lr(0.34) D(0.48) Lr(0.68) D(0.45) Lr(0.56) D(0.18) Lr(0.22) D(0.01925,0) Lr(0.0275,0) D(0.056,0) Lr(0.08,0) D(0.07) Lr(0.1) D(0.042) Lr(0.06) D(0.0175) Lr(0.025) Applied Loads Service loads entered. Load Factors will be applied for calculations. Beam self weight calculated and added to loads Load for Span Number 1 Varying Uniform Load : D(S,E) = 0.0140->0.0, Lr(S,E) = 0.020->0.0 ksf, Extent = 0.0 -->> 4.0 ft, Trib Width = 1.375 ft, (ROOF) Varying Uniform Load : D(S,E) = 0.0140->0.0, Lr(S,E) = 0.020->0.0 ksf, Extent = 4.0 -->> 20.330 ft, Trib Width = 4.0 ft, (ROOF) Point Load : D = 0.280, Lr = 0.340 k @2.50 ft, (FR RB36-L) Point Load : D = 0.480, Lr = 0.680 k @4.0 ft, (FR RB33-R) Point Load : D = 0.450, Lr = 0.560 k @7.750 ft, (FR RB38-L) Point Load : D = 0.180, Lr = 0.220 k @13.0 ft, (FR RB37-L) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 0.0 -->> 2.50 ft, Tributary Width = 5.0 ft, (ROOF) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 2.50 -->> 7.750 ft, Tributary Width = 3.0 ft, (ROOF) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 7.750 -->> 20.330 ft, Tributary Width = 1.250 ft, (ROOF) DESIGN SUMMARY Design OK Maximum Bending Stress Ratio 0.752: 1 Load Combination +D+0.750Lr+0.750L+H Span # where maximum occurs Span # 1 Location of maximum on span 7.725ft 117.39psi = = FB : Allowable 2,894.52psi Fv : Allowable 3.5x11.875 Section used for this span Span # where maximum occurs Location of maximum on span Span # 1 = Load Combination +D+0.750Lr+0.750L+H = = = 290.00psi = = Section used for this span 3.5x11.875 fb : Actual Maximum Shear Stress Ratio 0.405 : 1 0.000ft = = 2,176.49psi fv : Actual Maximum Deflection 0 <240 193 Ratio = 0 <180 Max Downward L+Lr+S Deflection 0.701 in 348 Ratio = Max Upward L+Lr+S Deflection 0.000 in Ratio = Max Downward Total Deflection 1.258 in Ratio = Max Upward Total Deflection 0.000 in Location in Span Load Combination Max. "-" Defl Location in Span Load Combination Span Max. "+" Defl Overall Maximum Deflections - Unfactored Loads D+Lr 1 1.2576 9.657 0.0000 0.000 Wood Beam ENERCALC, INC. 1983-2011, Build:6.11.6.23, Ver:6.11.6.23 Licensee : Lic. # : File: P:\7) Boccella Residence\Calculations\Enercalc\ROOF BEAMS.ec6 Description : RB39 Load Combination Support 1 Support 2 Vertical Reactions - Unfactored Support notation : Far left is #1 Values in KIPS Overall MAXimum 3.986 2.092 D Only 1.747 0.943 Lr Only 2.239 1.149 D+Lr 3.986 2.092