21 st 22 nd May 2014: CII Institute of Quality, Bangalore
With the increase in the awareness level of TPM in Indian Industry, it becomes imperative for the plant personnel to understand and to know how to deploy TPM. In order to bridge the above gap, we are organizing TPM Deployment Seminars across the country.
With a properly implemented Total Productive Maintenance (TPM) program, it is possible to eliminate loss, increase profit and create a better working environment. TPM aims to establish a corporate culture that will maximize production system effectiveness. It organizes a practical shop- floor system to prevent losses before they occur throughout the entire production system life cycle with a view to achieving zero accidents, zero defects and zero breakdowns, TPM is designed for manufacturing, but its concepts can also be deployed company wide involving all personnel. TPM involves all the departments of an organization including production, development, utilize uniqueness lies in the design which incorporates Top down & Bottom up approach for achieving assured success & sustainment of activities & results sales and management, every employee from top management down to front-line operators, to achieve zero loss through TPM activities.
The unique 8-Pillar approach of TPM is comprehensive and total in the way that it encompasses all activities and all employees, top to bottom in the Company, towards the improvements Deployment basically means to implement these activities in small and well-synchronized steps. These steps are designed to steadily graduate people and activities from one level of achievement to the next, while gradually modifying traditional ways into TPM way. TPM thus brings in a total cultural change in the whole organisation always looking towards improvements and betterment.
The Seminar will cover the following points: Fundamentals of TPM How to deploy TPM in an organisation the Unique 8 pillar approach
All the above points, when implemented, will be focused towards: Increase the levels of Productivity (P) Produce high Quality Products (Q-Zero defects) Lower Cost (C) of finish products Adherence to 100% on-time Deliveries (D) Increase Safety (S) and Increase Morale (M) of employees
Results achieved by companies practisingTPM
P..Productivity improvement -------------------------------------------------- 1.5 to 2 times Reduction in Number of Sporadic Failures----------------------- 1/10 to 1/250 Equipment Operating--------------------------------------------------- 1.5 to 2 times
Q..Reduction in Product Defects--------------------------------------------- 1/10 Reduction in Customer Claims------------------------------------- 1/4
C..Reduction in Maintenance Cost------------------------------------------- 30%
D..Reduction in Product Inventories----------------------------------------- 0
S.. Reduction in Accident, Elimination of Pollution----------------------- 0
M..Increase in Number of Employee Suggestions----------------------- 5 to 10 times
TPM is a unique way of building or re-building a manufacturing plant where the performance at each stage of operation can be measured quantitatively using PQCDSM parameters.
Faculty: Mr Ganapathy Subramaniam, Counsellor, TPM Club India, CII-Institute of Quality
Venue: CII Institute of Quality, Near Bharat Nagara, IInd Stage,Magadi Main Road, Vishwaneedam Post, Bangalore - 560 091; Ph: 080-65667804; 23289391
DELEGATE FEE: Category Fee per participant Service tax @ 12.36% Total fee payable CII Members / TPM Club Members Rs. 9,000/- Rs. 1,113/- Rs 10,113/- Non-Member Rs. 10,000/- Rs. 1,236/- Rs 11,236/- 3 or more delegates from a single company would be entitled for 10%discount on the total fee payable. Target Audience: Manufacturing Heads, Engineering Heads, Process Heads, Engineers, Senior Managers, and Managers from Manufacturing, Process, Engineering and Quality departments from the industries.
Members / Non-members are requested to kindly depute the concerned officials to attend this very important seminar and confirm their nomination through the enclosed REGISTRATION FORM.
Regards, Yours sincerely,
Rajesh Parim Principal Counsellor & Head, TPM Club India
REGISTRATION FORM
Please Email / fax to: Mr Amogh DS CII Institute of Quality Bharat Nagara, 2nd Stage, Magadi Main Road Vishwaneedam Post, Bangalore 500 091 Tel: 080 65667804/23289391; Mobile: 08105264321 Fax: 080-23289388/23580314 E-mail: amogh.ds@cii.in
TPM DEPLOYMENT SEMINAR 21 st & 22 nd May 2014: CII Institute of Quality, Bangalore
We nominate the following persons to attend the Seminar. Sl.No Name Designation E-mail 01 02 03 04 05
CII & TPM Club India Fee per participant Service tax @ 12.36% Total fee payable CII Members / TPM Club Members Rs. 9000/- Rs. 1,113/- Rs 10,113/- Non-Member Rs. 10,000/- Rs. 1,236/- Rs 11,236/- 3 or more delegates from a single company would be entitled for 10%discount on the total fee payable.
Enclosed please find a Cheque / Demand Draft No.. On .. (Bank) dated. for Rs drawn in favour of CII Institute of Quality, payable at Bangalore towards the delegate(s) fee and courier to the above address.