This document provides instructions for preparing and installing a print cylinder drum, including:
1) Removing shock blocks, inserting an ink cartridge, and starting a test mode to prepare the drum.
2) Conducting an operation check by making a test print and adjusting the squeegee roller gap if needed.
3) Affixing various labels to identify the drum model and ink color on the drum and case.
This document provides instructions for preparing and installing a print cylinder drum, including:
1) Removing shock blocks, inserting an ink cartridge, and starting a test mode to prepare the drum.
2) Conducting an operation check by making a test print and adjusting the squeegee roller gap if needed.
3) Affixing various labels to identify the drum model and ink color on the drum and case.
This document provides instructions for preparing and installing a print cylinder drum, including:
1) Removing shock blocks, inserting an ink cartridge, and starting a test mode to prepare the drum.
2) Conducting an operation check by making a test print and adjusting the squeegee roller gap if needed.
3) Affixing various labels to identify the drum model and ink color on the drum and case.
1) Remove three Shock absorbing blocks from the Print cylinder (drum). 2) Insert an ink cartridge into the Print cylinder (drum). Lead ink to the nozzle of the cartridge in advance. Important ! Be sure that the Print cylinder (drum) temperature is above 59 F (10 C). 3) Plug the power cord of the printer and start up the test mode. Important ! Be sure that there is no Print cylinder (drum) installed in the printer at this point. 4) Install the Print cylinder (drum) in the printer. Press the Reset key after the error code No.d04-534 appears. 5) Input the test item code No. 117 and press the Start key. 6) Input the test item code No. 890 and press the Start key. 7) Once turn the power switch off and start up the test mode again. 8) Input the test item code No. 887 and press the Start key. When the ink supply action is completed, a buzzer sounds. NOTE : If the action is interrupted, restart the test mode No.887. 9) Restart the printer to quit the test mode. 2. Operation Check 1) Make a master with Riso test chart No.8 and print 200 copies at speed 3. 2) Check density balance and if necessary, re-adjust the gap between Squeegee roller and Print cylinder (drum) body. 3. Labeling 1) Affix the following labels on the Print cylinder (drum) as illustrated. - Print cylinder (drum) indication label (white) - Model name indication label - Ink color indication label - Caution label (for UI print cylinder (drum) only ) 2) Affix the following labels on the Print cylinder (drum) case as illustrated. - Print cylinder (drum) indication label (transparent) - Model name indication label RISO KAGAKU CORPORATION Models RISO RZ2 Series / RZ3 Series 1. Print cylinder (drum) ................................... 1 unit 2. Ink color indication label ...................... 1 sheet 3. Print cylinder (drum) indication label (white) .................................................. 1 sheet 4. Print cylinder (drum) indication label (transparent) ......................................... 1 sheet 5. * Caution label ....................................... 1 sheet ( * for UI print cylinder (drum) only ) 6. Installation guide (This manual) .......... 1 copy 7. * Declaration of conformity .................. 1 copy ( * for EU only) Nobody but Ri so-aut hori zed servi ce representatives is allowed to install this unit. Types of Applicable Printers The following printer models are the intended basic units for installing the RZ2 / 3 series inkless print cylinder (drum). Packing List This package contains the following items. Installation Procedure for The RZ2 / 3 Series Inkless Print Cylinder (Drum) Important ! Be sure to follow the given instructions, or the warranty on this Print cylinder (drum) may be invalidated. This document is printed on recycled paper. A3 RZ3 A3 RZ3