1) This paper describes the development of an automated car braking system using a neural network in LabVIEW. The system will gradually increase braking pressure as the car gets closer to an obstacle, and fully brake when it reaches the closest safe distance.
2) A distributed intrusion detection system is presented for industrial automation networks. Current security approaches in automation do not adequately address rising security challenges from increased interoperability. The system aims to inspect traffic between devices to identify attacks.
3) LabVIEW is a versatile software tool that can be used for a wide range of applications beyond just instrumentation, including image processing, signal processing, and SCADA systems. It allows adding interactive graphical interfaces to projects. Many final year
1) This paper describes the development of an automated car braking system using a neural network in LabVIEW. The system will gradually increase braking pressure as the car gets closer to an obstacle, and fully brake when it reaches the closest safe distance.
2) A distributed intrusion detection system is presented for industrial automation networks. Current security approaches in automation do not adequately address rising security challenges from increased interoperability. The system aims to inspect traffic between devices to identify attacks.
3) LabVIEW is a versatile software tool that can be used for a wide range of applications beyond just instrumentation, including image processing, signal processing, and SCADA systems. It allows adding interactive graphical interfaces to projects. Many final year
1) This paper describes the development of an automated car braking system using a neural network in LabVIEW. The system will gradually increase braking pressure as the car gets closer to an obstacle, and fully brake when it reaches the closest safe distance.
2) A distributed intrusion detection system is presented for industrial automation networks. Current security approaches in automation do not adequately address rising security challenges from increased interoperability. The system aims to inspect traffic between devices to identify attacks.
3) LabVIEW is a versatile software tool that can be used for a wide range of applications beyond just instrumentation, including image processing, signal processing, and SCADA systems. It allows adding interactive graphical interfaces to projects. Many final year
1) This paper describes the development of an automated car braking system using a neural network in LabVIEW. The system will gradually increase braking pressure as the car gets closer to an obstacle, and fully brake when it reaches the closest safe distance.
2) A distributed intrusion detection system is presented for industrial automation networks. Current security approaches in automation do not adequately address rising security challenges from increased interoperability. The system aims to inspect traffic between devices to identify attacks.
3) LabVIEW is a versatile software tool that can be used for a wide range of applications beyond just instrumentation, including image processing, signal processing, and SCADA systems. It allows adding interactive graphical interfaces to projects. Many final year
This paper represents the development of a car braking system based on artificial neural network for use during parking. This project involves replacing the usual car reverse warning system with a system that will react automatically based on the distance between the car and a given obstacle by gradually increasing the braking pressure until such a point that is deemed the closest safe distance to the obstacle, in which the braking pressure will then be increased to max and the car will halt. To realize this application, this project will make use of LabView simulation software to create the artificial neural network engine and present the simulation results. Date of Conference: 21-24 Oct. 2012 A distributed intrusion detection system for industrial automation networks Modern automation is measured in terms of interoperability and easy administration. Introducing technology focussing on these criteria, however, induce new security risks to existing and future automation installations. Current security approaches in automation do not keep pace with the rising security challenges. Prevalent in automation is the use of access control to protect the system from malicious activity, such as extern attacks. Means to inspect the automation traffic to identify attacks that already have overcome access control or are initiated from inside the automation system are not available, yet. For filling this gap, we investigate in the application of intrusion detection techniques on industrial automation. In this paper, we present the current state of an intrusion detection system tailored to the analysis of operation down to traffic between automation devices on field layer. Date of Conference: 17-21 Sept. 2012 LabVIEW is a one of its kind versatile software tool that can be used in almost all engineering departments. Though the primary function of LabVIEW is in the form of virtual instrumentation, today LabVIEW projects can be used for variety of applications ranging from image processing, signal processing, instrumentation and control to SCADA systems and many more applications.Naturally final year LabVIEW Projects are gaining popularity among various departments. Contrary to popular belief LabVIEW is not just meant for EIE Projects, it is equally applicable to ECE projects and EEE projects as well. Using LabVIEW students can add very interactive and easy to use graphical interface to their final year projects. LabVIEW can be used with most projects which require a computer interface. LabVIEW is particularly useful with final year projects in Industrial monitoring and control. Thousands of interesting and innovative IEEE projects are possible with a LabVIEW interface. Additionally simulation projects that are completely based on LabVIEW are also possible.There is a popular belief among the academic community at large that to use LabVIEW in a real time project, one needs expensive DAQ cards and similar tools. This however is completely wrong. LabVIEW Projects can be implemented with real time working models, without using expensive DAQ cards.We at Ingens offer perhaps the widest range of final year projects based on LabVIEW for students of different departments. Projects in LabVIEW are possible for BE, B Tech projects as well as ME, M Tech projects and even beyond. We offer both LabVIEW simulation projects as well as real time projects based on LabVIEW.