Professional Documents
Culture Documents
Connector 12 026
Connector 12 026
Connector 12 026
12-026-4
Amphenol
This catalog covers the Amphenol /Matrix MILDTL-5015 Family of Connectors which incorporate
rear release crimp contacts. MIL-C-5015 has been
replaced by MIL-DTL-5015 for all Amphenol/Matrix
rear release crimp type connectors. These connectors
can be ordered through Amphenol, by military or
equivalent proprietary part numbers.
TABLE OF CONTENTS
Amphenol /Matrix MS/Standard Cylindrical
MIL-DTL-5015 Connectors with Crimp Rear Release
Contacts
Introduction, Table of Contents. . . . . . . . . . . . . . . . . .1
Catalog 12-020, Amphenol MIL-DTL-5015 and MIL5015 Type Standard Cylindrical Connectors, is also
available upon request. This catalog covers the MIL5015 cylindrical connectors with solder contacts. It
also covers the MIL-5015 type connectors with proprietary crimp contacts in a very broad range of insert
patterns - up to 280 different arrangements. Within
these connector styles, MIL-C-5015 has been
replaced as follows: Environmental classes F and R
are updated to and produced in strict accordance to
MIL-DTL-5015. Classes A, C and E are still produced,
but are no longer listed on the qualified products listing
(QPL).
Amphenol /Matrix MS/Standard
Cylindrical
MIL-DTL-5015 Connectors with
crimp rear release contacts
Amphenol broadens their MS/Standard family of connectors with the MIL-DTL-5015 Crimp Rear Release Series.
This series provides an alternative to the older MIL-C-5015
solder type. It bridges the gap between an old connector standard and the environmental and high performance needs of
current technologies.
MS3450
wall mounting receptacle
MS3451
cable connecting receptacle
DESIGN CHARACTERISTICS
Medium to heavy weight cylindrical
MS345( ) series intermateable with existing MIL-DTL5015 solder or crimp versions on existing equipment
Captive coupling nut mechanism, utilizes retaining rings in
combination with L washers to prevent inadvertent disassembly
Multiple interlock systems ensure permanent insert retention
Positive control of dielectric separation with guaranteed
ease of contact insertion
Positive contact retention provided by a closely toleranced
damage-proof metal retention clip
Completely sealed against environmental extremes with individual contact seals (conical risers on pin interface)
interfacial seals between contacts
peripheral gasket shell-to-shell seals
redundant rear wire seals and insert-to-shell seals
MS3452
box mounting receptacle
MS3454
jam nut receptacle
MS3456
plug with threaded
coupling
CUSTOMER OPTIONS
Seven mounting styles, in shell sizes 8 to 48*
Threaded coupling or self-locking plug (MS3459) with an
internal racheting mechanism to prevent unmating due to
vibration and shock, eliminating the need for safety wiring
Proprietary quick disconnect plug, with or without lanyard
available
Classes include aluminum or stainless steel shells, or
firewall capability
MS and Proprietary versions available
Some styles are supplied to McDonnell Douglas Specification BAN 7025, DC60 Series
Accommodation of contact sizes 0 to 16
Over 100 insert arrangement patterns available, accommodating from a minimum of 1 to a maximum of 85 circuits
Alternate positioning available
Thermocouple pin and socket contacts are available**
MS3459
plug with self-locking
coupling nut
Amphenol /Matrix MS/Standard
Cylindrical
MIL-DTL-5015 Connectors
class descriptions, performance specifications
CLASS DESCRIPTIONS
Amphenol/Matrix
Military MIL-DTL-5015
Class L*
Class A
Class W
Class F
Class LS
Class W
Class KT**
firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
Class FS
Class KT
firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
Class KS
firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Class KS
firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
PERFORMANCE SPECIFICATIONS
VOLTAGE RATING
Altitude
Inst.
Sea Level
1000
2000
2800
3500
4500
7000
50,000 ft.
400
600
675
750
825
975
70,000 ft.
260
360
400
440
480
560
110,000 ft.
200
200
200
200
200
200
SHOCK
Wired, mated connectors are subjected to one shock in each of three mutually perpendicular axes with pulse of an approximate half sine wave of 50g
magnitude for a duration of 11 milliseconds. All contacts wired in series circuit with 100 10 milliamperes of current flow.
OPERATING TEMPERATURE RANGE
Wired, mated connectors with the specified accessory attached will meet
the altitude immersion test specified in MIL-DTL-5015.
DURABILITY
MS/Standard
MS3450
wall mounting receptacle
Receptacle Shell, Flange Wall Mount,
Threaded Coupling
J Coupling
Thread
A Typ.
Polarizing
Key
B Typ.
3 Teeth Equally
Placed 120 Apart
E Dia.
Max
G Min. Full
Thread
C Dia.
4 Holes
K
F
B Typ.
D Max.
L Dia.
C Dia.
PANEL CUTOUT
A
.031
Class
A, F, R,
W
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.594
.719
.719
.812
.812
.906
.906
.969
.969
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
D Max.
Class
K
.150
.150
.150
.150
.150
.150
.150
.150
.150
.177
.177
.177
.177
.177
.209
.209
.209
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
E
Dia.
Max.
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
L
Dia.
.010
.593/.562
.593/.562
.593/.562
.781/.750
.593/.562
.781/.750
.593/.562
.781/.750
.593/.562
.781/.750
.781/.750
.781/.750
.843/.812
.843/.812
.906/.875
.906/.875
.906/.875
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.562
.688
.688
.812
.812
.938
.938
1.062
1.062
1.188
1.312
1.438
1.562
1.812
2.062
2.312
2.562
MS/Standard
MS3451
cable connecting receptacle
Receptacle Shell, Cable Connecting,
Threaded Coupling
Military No. MS3451
Amphenol/Matrix No. 9441
Polarizing Key
Blue Color
Band
A
J
Coupling
Thread
H Accessory Thread
3 Teeth Equally
Placed 120 Apart
B
Dia.
E Dia.
Max
G
C
F
D Max.
Shell
Size
B
Dia.
.031
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.504/.496
.629/.621
.629/.621
.754/.746
.754/.746
.879/.871
.879/.871
1.005/.996
1.005/.996
1.131/1.121
1.256/1.246
1.381/1.371
1.506/1.496
1.756/1.746
2.007/1.996
2.257/2.246
2.511/2.456
.729
.854
.854
.974
.974
1.099
1.099
1.224
1.224
1.349
1.474
1.599
1.715
1.974
2.224
2.474
2.724
.577/.562
.577/.562
.577/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.765/.750
.765/.750
.827/.812
.827/.812
.890/.870
.890/.870
.890/.870
D Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
E
Dia.
Max.
F
.015
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
MS/Standard
MS3452
box mounting receptacle
Receptacle Shell, Flange Box Mount,
Threaded Coupling
J Coupling
Thread
A Typ.
Polarizing
Key
B Typ.
E Dia.
Max
C Dia.
4 Holes
G
F
B Typ.
D Max.
L Dia.
C Dia.
PANEL CUTOUT
Shell
Size*
A
.031
C
Dia.
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.594
.719
.719
.812
.812
.906
.906
.969
.969
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.157/.142
.157/.142
.183/.168
.183/.168
.183/.168
D Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
E
Dia.
.016
.500
.625
.625
.750
.750
.875
.875
1.000
1.000
1.062
1.187
1.312
1.437
1.750
2.000
2.250
2.500
G
.015
J
Thread
Class 2A
L
Dia.
.010
.578/.562
.578/.562
.578/.562
.765/.750
.578/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.765/.750
.765/.750
.827/.812
.827/.812
.988/.875
.988/.875
.988/.875
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.562
.688
.688
.812
.812
.938
.938
1.062
1.062
1.188
1.312
1.438
1.562
1.812
2.062
2.312
2.562
MS/Standard
MS3454
jam nut receptacle
Receptacle Shell, Jam Nut Mount,
Threaded Coupling
Military No. MS3454
Amphenol/Matrix No. 9444
A Typ.
.045
.035
Pin Protrusion
Polarizing
Key
D Max
.180
.165
Blue Color
Band
H Accessory
Thread
C
Dia.
E
Dia
Max.
B
Typ.
J Coupling
Thread
.100
.095
O-Ring
.196
.186
3 Teeth
Equally Spaced
120 Apart
.128 Max.
Panel Thickness
G
Min. Full Thread
M
Dia.
PANEL CUTOUT
D Max.
Shell
Size*
A
.010
B
.005
C
Dia.
.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.687
.812
.812
.937
.937
1.125
1.125
1.250
1.250
1.375
1.500
1.625
1.750
2.000
2.375
2.625
2.875
1.187
1.312
1.312
1.437
1.437
1.562
1.562
1.687
1.687
1.812
1.937
2.156
2.281
2.531
2.781
3.031
3.281
1.272
1.397
1.397
1.522
1.522
1.647
1.647
1.772
1.772
1.897
2.022
2.241
2.366
2.616
2.866
3.116
3.366
Size
Size
8, 4, 0
16 & 12
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
E
Dia.
Max.
F
.005
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
L
.005
M Dia.
+.015
.000
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.720
.720
.720
.970
.720
.970
.720
.970
.720
.970
.970
.970
.970
.970
.970
.970
.970
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.323
.385
.385
.448
.448
.510
.510
.573
.573
.635
.698
.760
.823
.948
1.073
1.198
1.323
.505
.630
.630
.755
.755
.880
.880
1.005
1.005
1.130
1.255
1.380
1.505
1.755
2.005
2.255
2.505
MS/Standard
MS3456
straight plug
Plug Shell,
Threaded Coupling
Military No. MS3456
Amphenol/Matrix No. 9446
Polarizing Keyway
Blue Color Band
A
Dia Max.
J Coupling
Thread
H Accessory Thread
3 Teeth
Equally Spaced
120 Apart
E
Dia
Max.
B
Dia.
D Min. Full
Thread
C Max.
Shell
Size*
A
Dia.
Max.
B
Dia.
.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.844
.969
.969
1.062
1.062
1.156
1.156
1.250
1.250
1.344
1.469
1.594
1.719
1.969
2.219
2.469
2.719
.360
.435
.441**
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
MS/Standard
MS3459
straight plug with self-locking coupling nut
Plug Shell, Self-Locking,
Threaded Coupling
Military No. MS3459
Amphenol/Matrix No. 9816
Polarizing Keyway
Fully Coupled
Indicator
Blue Color Band
A
Dia Max.
J Coupling
Thread
H Accessory Thread
3 Teeth
Equally Spaced
120 Apart
E
Dia
Max.
B
Dia.
D Min. Full
Thread
Clutch Plate
C Max.
Shell
Size*
A
Dia.
Max.
B
Dia.
.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.963
1.088
1.088
1.213
1.213
1.358
1.358
1.463
1.463
1.588
1.713
1.788
1.963
2.213
2.463
2.713
2.963
.360
.435
.441**
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
1.510
1.510
1.510
1.780
1.510
1.780
1.510
1.780
1.510
1.850
1.850
1.850
1.850
1.850
1.850
1.850
1.850
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
MS/Standard
9817, 9818
quick disconnect plug, with/without lanyard
Plug Shell, Quick Disconnect,
Push-pull Coupling
Amphenol/Matrix No. 9817 with lanyard
Amphenol/Matrix No. 9818 without lanyard
C Max.
A
Dia Max.
D Min. Perf.
Thread
Polarizing
Keyway
H Thread
B Dia.
E Dia. Max.
.061
.046
3 Teeth
Equally Spaced
120 Apart
9818 Connector
7.500 Max
Shell
Size*
A
Dia.
Max.
B
Dia.
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
1.087
1.224
1.224
1.355
1.355
1.482
1.482
1.609
1.609
1.817
1.942
2.075
2.203
2.516
2.735
3.015
3.306
.360
.435
.441
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
Amphenol/
Matrix Part
Number for
Adapter Ring
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
2500-008-0X08
2500-008-0X10
2500-008-0X10
2500-008-0X12
2500-008-0X13
2500-008-0X14
2500-008-0X15
2500-008-0X16
2500-008-0X17
2500-008-0X18
2500-008-0X20
2500-008-0X22
2500-008-0X24
2500-008-0X28
2500-008-0X32
2500-008-0X36
2500-008-0X40
10
Mating Face of
Receptacle Shell
Finish
0 - Electroless Nickel
1 - Black Anodize
2 - Cadmium/olive drab
3 - Stainless steel,
passivated
MS/Standard
insert arrangements
Insert
Arrangement
Service
Rating
Total
Contacts
8S-1
10S-2
10SL-3
Contact Size
Contact Size
16
Insert
Arrangement
Service
Rating
Total
Contacts
18-23
A/Inst.
10
18-24
A/Inst.
10
18-27
10SL-4
18-28
12S-1
20-2
12S-2
20-4
12S-3
20-7
D/A
12S-4
20-8
Inst.
12-5
14S-1**
Inst.
14S-5
Inst.
14S-6
Inst.
14S-7
12
12
16
10
10
1
4
8
2
20-9*
D/A
20-14
20-15
20-16
20-17
20-18
20-19
14S-9**
20-21
14S-10
Inst.
20-22
14S-11
Inst.
20-24
14S-12
20-27
14
14
14S-13
20-29
17
17
16S-1
20-32
D/A
16-2*
20-33
11
11
16S-3*
22-2
16S-4*
22-4**
16-7*
22-5
16S-8
22-6*
16-9
22-7*
16-10
22-9*
16-11
22-10*
16-12
22-11*
16-13
22-12*
18-1
A/Inst.
10
10
22-14
19
18-4
22-15*
E/A
18-5
22-17*
D/A
18-6*
22-18*
D/A
14S-2
14-3
1
2
2
1
18-7*
22-19
14
18-8
1
1
22-21
18-9
Inst.
22-22
1
2
3
3
2
2
2
1
3
4
2
3
19
2
4
22-23
D/A
22-27*
D/A
18-12*
22-30
19
18-13
22-32
18-14*
22-36*
D/A
18-15*
24-1**
18-16*
24-2
18-17
Inst.
24-4*
18-18
Inst.
24-5**
16
18-19**
10
10
24-6*
D/A
18-22**
3
1
8
1
8
19
1
7
11
8
14
1
8
18-11
18-10**
3
16
8
MS/Standard
insert arrangements
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
24-7
16
24-10
24-11
24-12
24-15
16
24-16*
D/A
24-20
11
24-21*
10
24-22
24-24
16
24-27*
24-28
Inst.
24-80*
Inst.
28-1
D/A
28-2
14
28-3*
28-4*
E/D
28-5*
28-8*
E/D/A
28-9
28-10
D/A
28-11
22
28-12
28-13
12
16
Insert
Arrangement
Service
Rating
Total
Contacts
14
32-22*
54
32-63
7
3
2
Contact Size
0
12
16
54
32-73
46
36-3
46
3
16
36-5
36-6
36-7
47
36-8
47
46
36-9
31
14
14
16
36-10
48
48
36-11
48
48
24
24
36-12
48
48
23
23
36-15
D/A
35
35
36-16
47
36-17
47
40
36-18
31
14
14
14
14
6
2
12
40
40
36-21
31
36-52
52
12
10
36-66*
56
52
12
40-1
30
24
52
40-2*
23
18
40-3*
23
26
26
40-4*
23
26
26
40-5*
15
28-15
35
35
40-6*
26
24
28-16*
20
20
40-7*
A/D
22
18
28-17
B/D/A
15
15
40-9
47
22
24
28-18*
C/D/A/Inst.
12
12
40-10*
29
28-19*
B/D/A
10
40-11*
25
18
28-20
14
10
40-56*
85
85
28-21
37
37
40-62*
60
60
28-22
32-1
E/D
32-2*
32-3*
32-6
23
32-7
Inst./A
35
32-9
14
32-13
23
32-15
32-16
23
32-17
32-19*
E/D
32-20
23
3
4
2
2
16
28
12
5
18
6
3
16
3
2
16
12
18
16
1
1
3
3
23
4
16
MS/Standard
insert alternate positioning
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate rotations are available as indicated
in the accompanying charts.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction from
the normal shell key. The socket insert would be rotated
counter-clockwise the same number of degrees in respect to
the normal shell key.
The charts give the W, X, Y, Z positions for the alternate
rotations available for the insert arrangements of the rear
release MIL-DTL-5015 series of connectors. If an insert
arrangement number is not given, then there is no available
alternate rotation for that pattern.
80
110
250
280
16-7
20-22
24-4
28-4
28-21
40-3
18-5
22-6
24-5
28-8
32-1
40-4
22-12
24-6
28-9
32-3
40-5
18-13
22-14
24-7
28-10
32-6
40-6
18-14
22-15
24-12
28-11
32-9
40-7
20-7
22-17
24-16
28-15
32-13
40-11
20-8
22-18
24-20
28-16
32-22
20-9
22-19
24-21
28-17
36-7
20-14
22-21
24-28
28-19
36-8
20-16
24-1
28-1
28-20
40-2
18-9
Position W
Position X
Position Y
Position Z
View looking into front face of pin insert or rear of socket insert.
Insert
Arrangement
Degrees
W
12S-3
70
145
215
290
14S-2
120
240
14S-5
110
14S-7
90
180
270
14S-9
70
145
16S-1
80
16S-4
35
16S-8
16-9
Insert
Arrangement
Degrees
W
20-17
90
180
270
20-18
35
110
250
20-19
90
180
270
20-21
35
110
215
290
20-24
35
280
20-27
110
250
325
20-29
170
265
35
110
250
16-10
90
180
16-11
35
Insert
Arrangement
Degrees
W
28-2
35
110
250
325
325
28-3
70
145
215
290
28-5
35
110
250
325
250
325
28-12
90
180
270
110
250
325
28-18
70
145
215
290
35
110
250
325
28-22
70
145
215
290
80
280
32-2
70
145
215
290
22-2
70
145
215
290
32-7
80
125
235
280
325
22-4
35
110
250
325
32-15
35
110
250
280
270
22-5
35
110
250
325
32-17
45
110
250
110
250
325
22-9
70
145
215
290
32-73
36
290
16-13
35
110
250
325
22-10
35
110
250
325
36-3
70
145
215
18-1
70
145
215
290
22-11
35
110
250
325
36-5
120
240
18-4
35
110
250
325
22-22
110
250
36-6
35
110
250
325
18-8
70
290
22-23
35
250
36-9
80
125
235
280
18-10
120
240
22-27
80
250
280
36-10
80
125
235
280
18-11
170
265
22-36
90
270
36-15
60
125
245
305
18-12
80
280
24-2
80
280
36-52
72
144
216
288
18-15
120
240
24-10
80
280
36-66
110
250
260
280
18-19
120
240
24-11
35
110
250
325
40-1
65
130
235
300
18-22
70
145
215
290
24-22
45
110
250
40-9
65
125
255
310
20-4
45
110
250
24-27
80
280
40-10
65
125
255
310
20-15
80
280
24-80
35
145
240
300
40-56
72
144
216
288
40-62
30
130
220
290
13
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
100
Insert Arrangement
250
100 Rotation
of 12S-3
250 Rotation
of 12S-3
8S-1
10S-2
10SL-3
10SL-4
12S-1
12S-2
12S-3
Service Rating
A***
Number of Contacts
Contact Size
16
16
16
16
16
16
16
A
B
B
D
C
Insert Arrangement
12S-4
12-5
14S-1**
14S-2
14-3
14S-5
14S-6
Service Rating
Inst.
Inst.
Inst.
Number of Contacts
Contact Size
16
12
16
16
16
16
100
100
B
C
B
Insert Arrangement
250
C A
260
100 Rotation
of 14S-2
250 Rotation
of 14S-2
100 Rotation
of 14S-1
260 Rotation
of 14S-1
14S-7
14S-9**
14S-10
14S-11
14S-12
14S-13
Service Rating
Inst.
Inst.
Number of Contacts
Contact Size
16
16
16
16
16
16
F
G
Insert Arrangement
16S-1
16-2*
16S-3*
16S-4*
16-7*
16S-8
Service Rating
Number of Contacts
Contact Size
16
12
16
16
16
16
CONTACT LEGEND
14
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
C
B
Insert Arrangement
16-9
16-10
16-11
16-12
16-13
18-1
B, C, F, G = A; Bal. = Inst.
Service Rating
Number of Contacts
10
Contact Size
12
16
12
12
12
16
Insert Arrangement
Service Rating
E
H
B
G
A
18-4
18-5
18-6*
18-7*
18-8
18-9
Inst.
Number of Contacts
Contact Size
16
12
16
12
16
12
16
E
D
A
A
C
C
Insert Arrangement
18-10**
18-11
18-12*
18-13
18-14*
Service Rating
Number of Contacts
Contact Size
12
12
16
12
16
12
100
F
E
250
D
100
18-15*
C
G
Service Rating
J
C
B
E
Insert Arrangement
I
F
100 Rotation
of 18-9
250 Rotation
of 18-9
100 Rotation
of 18-1
18-16*
18-17
18-18
18-19**
18-22**
18-23
Inst.
Inst.
B, C, F, G = A; Bal. = Inst.
Number of Contacts
10
10
Contact Size
12
12
16
12
16
16
16
16
CONTACT LEGEND
15
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
100
H
C
E
250
C
E
250 Rotation
of 18-1
100 Rotation
of 18-5
250 Rotation
of 18-5
18-24
18-27
18-28
20-2
20-4
20-7
B, C, F, G = A; Bal. = Inst.
A, B, G, H = D; C, D, E, F = A
Insert Arrangement
Service Rating
G
H
250
Number of Contacts
10
Contact Size
16
12
16
12
16
12
16
C
E
A
B
A
B
G
D
B
D
A
F
D
D
Insert Arrangement
20-8*
20-9*
20-14
20-15
20-16
Service Rating
Inst.
H = D; Bal. = A
20-17
A
Number of Contacts
Contact Size
16
12
16
12
12
12
16
12
16
H
G
I
C
D
I
E
D
E
B
K
H
N
20-18
20-19
20-21
20-22
20-24
Service Rating
B
I
Insert Arrangement
C
D
M
F
20-27
A
Number of Contacts
14
Contact Size
12
16
12
16
16
16
16
CONTACT LEGEND
16
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
M
L
K
A
G
D
F
F
H
260
C
D
B
M
B
C
260 Rotation
of 20-7
Insert Arrangement
20-29
20-32
20-33
22-2
22-4**
Service Rating
A, B, G, H = D; Bal. = A
Number of Contacts
17
11
Contact Size
16
16
16
12
12
16
E
B
Insert Arrangement
22-5
B
D
22-6**
22-7*
22-9*
22-10*
22-11*
Service Rating
22-12*
D
Number of Contacts
Contact Size
16
12
16
16
16
L
K
J
U
T
V
S
A
B
N
P
R
K
J
C
D
N
G
Insert Arrangement
E
G
22-14
22-15*
22-17*
22-18*
22-19
Service Rating
D = 3; Bal. = A
A = D; Bal. = A
C, D, E = A: Bal. = D
Number of Contacts
19
14
Contact Size
16
12
16
12
16
16
16
16
CONTACT LEGEND
17
16
12
22-21
A
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
G
D
H
H
Insert Arrangement
260
C
B
E
C
260
260 Rotation
of 22-14
260 Rotation
of 22-5
22-32
22-22
22-23
22-27*
22-30
Service Rating
H = D; Bal. = A
J = D; Bal. = A
Number of Contacts
19
Contact Size
12
16
16
12
16
A
G
F
C
F
A
B
A
B
Service Rating
R
S
22-36*
24-1**
24-2
24-4*
H = D; Bal. = A
24-5**
A
Number of Contacts
16
Contact Size
12
12
12
16
16
G
F
K
M
C
D
Insert Arrangement
L
E
A
K
A
G
D
E
C
D
Insert Arrangement
Service Rating
O
H
E
G
I
C
24-6*
24-7
24-10
24-11
A, G, H = D; Bal. = A
24-12
A
Number of Contacts
14
Contact Size
12
12
16
12
12
CONTACT LEGEND
18
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
100
K
M
B
G
D
C
100 Rotation
of 24-5
Insert Arrangement
24-15
24-16*
24-20
24-21*
24-22
Service Rating
A, B, F, G = D; C, D, E = A
Number of Contacts
16
Contact Size
16
12 16
12
16
16
A
D
M
P
L
R
B
F
J
L
C
G
N
D
H
E
Q
V
Z
250
D
H
W
W
C
D
A
J
250 Rotation
of 24-5
Insert Arrangement
24-24
24-27*
24-28
24-80*
28-1
Service Rating
Inst.
Inst.
A, J, E = D; Bal. = A
Number of Contacts
16
24
23
Contact Size
16
16
16
16
12
L
P
B
M
G
C
B
F
G
G
L
E
B
D
Insert Arrangement
28-2
28-3*
28-4*
28-5*
28-8*
G, P, S = E; Bal. = D
L, M = E; B = D; Bal. = A
Service Rating
Number of Contacts
12
10
Contact Size
12
16
12
16
12 16
12
16
CONTACT LEGEND
19
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
J
H
A
K
G
E
N
U
B
Insert Arrangement
28-10
28-11
G = D, Bal. = A
28-12
A
18
26
Contact Size
12
16
8 12
12
16
16
A
S
a
N
T
b
D
d
V
W
R
X
A
B
C D
E
F G
J
K
L
M
D
J
E
L
A G
N
D
M
U
h
f
T
S
e
j
W
c
K
N
G
H
X
J
Number of Contacts
100
28-9
Service Rating
Y
K
T
b
M
D
A
S
X
E
E
F
100 Rotation
of 28-12
Insert Arrangement
28-13
28-15
28-16**
28-17
Service Rating
R = B; M, N, P = D; Bal. = A
Number of Contacts
26
35
20
15
Contact Size
16
16
16
16
A
B
C
D
Insert Arrangement
h
n
28-18*
28-19*
28-20
M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst.
H, M = B; A, B = D; Bal. = A
j
r
10
37
Contact Size
16
12
16
12
16
16
20
Z
f
28-21
12
CONTACT LEGEND
R
X
J
P
Number of Contacts
V
c
b
g
G
H
G
J
D
G
T
a
E
H
C
N
Service Rating
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
C
A
F
B
B
H
G
Insert Arrangement
28-22
32-1
32-2*
A = E; B, C, D, E = D
Service Rating
32-3*
D
Number of Contacts
Contact Size
16
12
16
12 16
C
E
P
J
L
d
N
32-7
32-9
A, B, h, j = Inst.; Bal. = A
32-13
D
Number of Contacts
16
28
12
18
Contact Size
12 16
12
16
16
12
16
100
B
E
D
I
P
A
D
D
G
O
F
S
T
U
G
260
100 Rotation
of 32-6
Insert Arrangement
260 Rotation of
32-1
32-15
32-16
32-17
32-19*
A = E, Bal. = D
Service Rating
D
E
U
H
32-6
Service Rating
S
Z
I
L
Insert Arrangement
P
X
S
T
c
F
I
K
P
W
Number of Contacts
16
Contact Size
12
12 16
12
CONTACT LEGEND
21
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
D
260
k
q
p
u
16
44
42
32
AE
27
28
12
AG
AF
40
11
29
30
13
26
41
31
25
39
46
14
45
15
C
AC
3
24
38
43
33
AA
AD
2
23
37
34
AB
17
V
Z
1
22
36
35
U
Y
T
X
18
19
21
20
I
K
B
D
10
260 Rotation
of 32-6
Insert Arrangement
32-20
32-22*
32-63
Service Rating
32-73
Number of Contacts
16
54
46
Contact Size
12 16
16
16
E
G
D
E
H
K
B
E
P
U
d
j
Insert Arrangement
36-5
36-6
w
y
z
36-7
A
40
Contact Size
12
12
16
A
F
G
N
I
S
T
X
h
p
t
u
w
v
x
V
a
c
g
e
j
100
D
E
R
L
e
m
j
r
J
P
G
M
N
T
U
b
g
p
h
r
q
w
j
s
x
z
y
100 Rotation
of 36-10
Insert Arrangement
36-8
36-9
36-10
Service Rating
36-11
Number of Contacts
46
14 14
48
48
Contact Size
12
16
12 16
16
16
CONTACT LEGEND
22
k
s
U
O
C
H
B
A
d
e
H
P
b
f
m
m
p
g
k
Number of Contacts
36-3
Service Rating
S
W
R
V
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
S
A
C
W
d
X
e
Z
g
q
j
r
W
h
d
h
g
k
p m
t
u
s
y
100 Rotation
of 36-7
110 Rotation
of 36-7
36-17
36-15
36-16
M = D, Bal. = A
Number of Contacts
48
35
40
40
Contact Size
16
16
12
16
12
16
A B
C D
D
E
d
e
f
G
T
260
n
v
u
AA
h
q
AE
m
w
AF
AE
AD
AJ
36-21
36-52
14 14
14 14
52
52
Contact Size
12 16
12 16
16
12
16
U
Y
U
B
G
M
F
L
N
T
X
b
AB
B
E
D
J
O
J
L
H
AC
G
A
36-66*
AH
Number of Contacts
AF
36-18
AK
K
U
z
AG
AC
D
L
AA
P
Y
r
x
AH
260 Rotation
of 36-9
Service Rating
AB
100 Rotation
of 36-9
Insert Arrangement
S
Y
AD
W
d
V
c
b
j
C
J
F
M
36-12
Service Rating
100
W
a
R
V
I
L
110
t
u
110 Rotation
of 36-10
Insert Arrangement
W
a
R
V
Z
F
G
E
G
K
y
D
F
100
a
h
B
T
110
P
O
V
R
F
Insert Arrangement
40-1
40-2*
Service Rating
40-3*
D
Number of Contacts
24
23
18
Contact Size
12
16
16
12
16
CONTACT LEGEND
23
16
12
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
I
J
E
B
C
F
P
Z
D
H
Y
N
N
S
T
W
E
G
H
X
U
L
K
Insert Arrangement
40-4*
40-5*
Service Rating
I
J
40-6*
D
Number of Contacts
16
Contact Size
12 16
12
12 16
Service Rating
40-7*
40-9
A
U
T
W
c
b
a
40-10*
A
18
22 24
16
Contact Size
12 16
12 16
16
R
S
T
D
U
c
21
41
40
AA
AC
AD
AP
AE
AR
AS
AH
AF
AT
AJ
AK
AL
AW
AV
AU
AM
AX
60
AB
AZ
BJ
BA
BB
BK
BC
BL
BS
BD
BM
BT
BE
BN
BU
BF
BP
56
59
38
AN
37
18
50
BH
BR
30
31
32
9
34
10
11
15
12
13
40-11*
40-56*
Service Rating
33
14
Insert Arrangement
46
29
47
49
16
BV
45
48
35
17
4
28
57
58
51
AY
36
44
52
55
53
39
27
43
54
3
26
42
19
25
22
20
t
24
23
N
Number of Contacts
O
R
P, Q, U, V, W, X = A; Bal. = D
H
K
E
D
Insert Arrangement
k
W
24
40-62*
Number of Contacts
18
85
60
Contact Size
12 16
16
16
CONTACT LEGEND
24
16
12
MS/Standard
contact information, sealing plugs,
crimping and insertion/removal tools
MS/STANDARD
CRIMP REAR RELEASE CONTACTS
Socket Contacts
Pin Contacts
Wire Range
Contact
Size
AWG
mm2
Military
Part Number
Amphenol/Matrix
Part Number
Military
Part Number
Amphenol/Matrix
Part Number
16S*
2016
0.51.4
M39029/30-217
M5100-033-1601L
M39029/29-212
M5000-029-0016L
16
2016
0.51.4
M39029/30-218
M5100-033-1602L
M39029/29-212
M5000-029-0016L
12
1412
23
M39029/30-219
M5100-033-0012
M39029/29-213
M5000-029-0012
108
58.5
M39029/30-220
M5100-033-0008
M39029/29-214
M5000-029-0008
64
1321
M39029/30-221
M5100-033-0004
M39029/29-215
M5000-029-0004
20
3460
M39029/30-222
M5100-033-0000
M39029/29-216
M5000-029-0000
SEALING PLUGS
Amperes
Max.
lb.
16
13
50
25
111.2
12
23
50
30
133.4
46
25
50
222.4
80
14
60
266.9
150
12
75
333.6
Contact
Size**
Sealing Plugs
Contact Retention
Voltage
Crop
Millivolts
Axial Load
Contact
Size
Military
Part Number
Amphenol/Matrix
Part Number
16S
MS27488-16-1
10-405996-161
16
MS27488-16-1
10-405996-161
12
MS27488-12-1
10-405996-121
MS27488-8-1
10-405996-081
MS27488-4-1
10-405996-041
MS27488-0-1
10-405996-001
CRIMPING TOOLS
Contact
Size
Wire Range
Crimping Tool
Part Number
Turret or Positioner
Part Number
AWG
mm2
Inch
mm
16S
2016
0.51.4
.053.103
1.342.62
Red/White
M22520/1-01
M22520/1-02
16
2016
0.51.4
.053.103
1.342.62
Blue/White
M22520/1-01
M22520/1-02
12
1412
23
.085.158
2.154.01
Yell./White
M22520/1-01
M22520/1-02
108
58.5
.132.255
3.356.48
White/Red
M22520/23-01
M22520/23-02
64
1321
.237.370
6.019.40
White/Blue
M22520/23-01
M22520/23-04
20
3460
.360.550
9.1413.97
White/Yell.
M22520/23-01
M22520/23-05
Color Code
INSERTION/REMOVAL TOOLS
Contact
Size
Color Code
Military
Part Number
Amphenol/Matrix
Part Number
16
Blue/White
M81969/14-03
10-538988-016
12
Yell./White
M81969/14-04
10-538988-012
White/Red
M81969/14-06
6500-018-0008
White/Blue
M81969/14-07
6500-018-0004
White/Yell.
M81969/14-08
6500-018-0000
Amphenol installation instructions, L-2106, gives information on insertion, removal and crimping of contacts for
Matrix MIL-DTL-5015 connectors.
25
MS/Standard Accessories
protection caps plug
PLUG PROTECTION CAP 10-329391-XX*
Assembly
Number
L
10-329391-10
10-329391-11
10-329391-12
10-329391-14
10-329391-16
10-329391-18
10-329391-20
10-329391-22
10-329391-24
10-329391-28
10-329391-32
10-329391-36
10-329391-40
10-329391-44
A THD
10-229125-10
10-229125-12
10-229125-14
10-229125-16
10-229125-18
10-229125-20
10-229125-22
10-229125-24
10-229125-28
10-229125-32
10-229125-36
10-229125-40
A THD
MS25042-8DA
MS25042-10DA
MS25042-12DA
MS25042-14DA
MS25042-16DA
MS25042-18DA
MS25042-20DA
MS25042-22DA
MS25042-24DA
MS25042-28DA
MS25042-32DA
MS25042-36DA
MS25042-40DA
A THD
A
Thread
Class 2A
.625-24UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
2.750-16UN
A
Thread
Class 2A
.625-24NEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.500-18NEF
1.750-18NS
2.000-18NS
2.250-16UN
2.500-16UN
A
Thread
Class 2A
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
B Dia.
+.010
.000
C
Approx.
L
Max.
.516
.641
.641
.766
.891
1.016
1.141
1.266
1.391
1.641
1.891
2.078
2.328
2.641
3.5
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
1.312
1.312
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
C
Approx.
D
Ref.
L
Max.
3.0
3.5
3.5
3.5
3.5
3.5
3.5
4.5
4.5
5.0
5.0
5.0
.140
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
1.233
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
B Dia.
+.010
.005
C
Approx.
L
Max.
.156
.156
.156
.156
.156
.156
.187
.187
.187
.187
.218
.218
.218
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.969
.969
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
26
MS/Standard Accessories
protection caps receptacle
RECEPTACLE PROTECTION CAP 10-329392-XX*
L
A THD
Assembly
Number
A
Thread
Class 2B
B
Dia.
Min.
C
Approx.
D
Dia.
Max.
L
Max.
10-329392-10
10-329392-12
10-329392-14
10-329392-16
10-329392-18
10-329392-20
10-329392-22
10-329392-24
10-329392-28
10-329392-32
10-329392-36
10-329392-40
10-329392-44
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
2.750-16UN
.516
.641
.766
.891
1.016
1.141
1.266
1.391
1.641
1.891
2.078
2.328
2.641
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
2.938
.793
.793
.793
.793
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
Assembly
Number
A
Thread
Class 2B
B
Ref.
C
Approx.
D
Dia.
Max.
L
Max.
10-422905-103
10-422905-123
10-422905-143
10-422905-163
10-422905-183
10-422905-203
10-422905-223
10-422905-243
10-422905-283
10-422905-323
10-422905-363
10-422905-403
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
.193
3.0
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
.812
.812
.812
.812
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
MS
Number
A
Thread
Class 2B
B
+.010
.005
C
Approx.
D
Dia.
Max.
L
Max.
MS25043-8DA
MS25043-10DA
MS25043-12DA
MS25043-14DA
MS25043-16DA
MS25043-18DA
MS25043-20DA
MS25043-22DA
MS25043-24DA
MS25043-28DA
MS25043-32DA
MS25043-36DA
MS25043-40DA
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
.140
.140
.140
.140
.140
.140
.140
.140
.171
.171
.187
.187
.187
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.688
.815
1.000
1.125
1.188
1.344
1.469
1.594
1.719
1.969
2.219
2.469
2.719
.750
.750
.750
.750
.750
.750
.750
.750
.750
.812
.812
.812
.812
B
D
L
A THD
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
27
MS/Standard Accessories
dust caps
10-70500 RECEPTACLE DUST CAP
for external threads
L1
MS
Shell Size
Order
Number
A Dia.
Nominal
Thread
C
Dia.
.031
L1
.062
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
10-70500-8
10-70500-10
10-70500-10
10-70500-12
10-70500-12
10-70500-14
10-70500-14
10-70500-16
10-70500-16
10-70500-18
10-70500-20
10-70500-22
10-70500-24
10-70500-28
10-70500-32
10-70500-36
10-70500-40
.500
.625
.625
.750
.750
.875
.875
1.000
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.250
2.500
.750
.875
.875
1.000
1.000
1.125
1.125
1.250
1.250
1.375
1.500
1.625
1.750
1.938
2.250
2.500
2.750
.500
.500
.500
.500
.500
.500
.500
.500
.500
.562
.562
.562
.562
.562
.562
.625
.625
MS
Shell Size
Order
Number
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
10-70506-8S
10-70506-10S
10-70506-10S
10-70506-12
10-70506-12
10-70506-14
10-70506-14
10-70506-16
10-70506-16
10-70506-18
10-70506-20
10-70506-22
10-70506-24
10-70506-28
10-70506-32
10-70506-36
10-70506-40
L2
28
B
Dia.
Min.
L2
.125
.469
.587
.587
.704
.704
.828
.828
.953
.953
1.072
1.197
1.322
1.447
1.697
1.947
2.190
2.440
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
MS/Standard
how to order
HOW TO ORDER BY MILITARY PART NUMBER
MIL-DTL-5015 CONNECTORS
WITH REAR RELEASE CRIMP CONTACTS
MS
1
3456
2
L
3
16S 8
4
5
P
6
W
7
944
1
6
2
F
3
16S 8
4
5
P
6
W
7
***
8
1.
Connector Type
MS designates Military Standard
1.
Connector Type
944 designates Amphenol/Matrix Series Number
2.
Connector Style
THREADED COUPLING CONNECTORS
3450 wall mounting receptacle
3451 cable connecting receptacle
3452 box mounting receptacle
3454 jam nut receptacle
3456 straight plug
3459 straight plug with self-locking coupling nut
2.
3.
Service Class
L
aluminum shell, electroless nickel finish, fluid resistant insert
W
aluminum shell, cadmium olive drab finish, fluid
resistant insert
LS stainless steel shell, passivated, fluid resistant
insert
KT firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
KS firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Connector Style
THREADED COUPLING CONNECTORS
9440 wall mounting receptacle
9441 cable connecting receptacle
9442 box mounting receptacle
9444 jam nut receptacle
9446 straight plug
9816 straight plug with self-locking coupling nut
9817 quick disconnect plug with lanyard
9818 quick disconnect plug without lanyard
3.
Service Class
A
aluminum shell, black anodize finish, fluid resistant
insert (not MIL-Spec)
F
aluminum shell, electroless nickel finish, fluid resistant insert
W
aluminum shell, cadmium olive drab finish, fluid
resistant insert
FS stainless steel shell, passivated, fluid resistant
insert
RS fluid resistant insert
KT firewall, steel shell, cadmium/olive drab finish, nonflammable hard dielectric and fluid resistant insert
KS firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Note:
7.
Contact Types
P designates pin
S designates socket
A designates less pins
B designates less sockets
Contact Types
P designates pin
S designates socket
Note:
Use A & B only when other than a full complement of power contacts is to be installed.
7.
Insert Rotation
W, X, Y, Z designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 13 for description of alternate
positions.
Insert Rotation
W, X, Y, Z designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 13 for description of alternate
positions.
8.
Modification Number
Consult Amphenol, Sidney, NY for information.
For strain reliefs use the following modification codes:
(189) E-nut M85049/31 configuration
(190) Straight strain relief M85049/52 configuration
(191) 90 strain relief M85049/51 configuration
29
The 3100 Series has five classes of connectors to meet different requirements. Within these connector styles, MIL-C-5015
has been replaced as follows: Environmental classes F and R are updated to and produced in strict accordance to MIL-DTL5015. Classes A, C and E are still produced, but are no longer listed on the qualified products listing (QPL).
Class designations and brief descriptions are as follows:
A
C
MIL-5015 Modifications
In order to supplement standard MS shell styles and provide a greater variety of styles for the electrical connector user, there
are several MS and MS Modified cylindrical connectors offered by Amphenol. These types include flange mount plugs, thru
bulkhead receptacles, jam nut receptacles, connectors for potting and
connectors designed specifically to terminate jacketed cable.
Ask for Amphenol catalog 12-021 for detailed information.
30