Both the Evolution E-Swivel Slim One-Way and the Evolution E-Swivel Slim Two-Way have been designed to be run in conjunction with tubing rotator systems on pumping wells that utilize a progressive cavity pump and a torque anchor or a rod pump with a tension anchor.
Applications
- Setting torque anchors
- Used with tubing rotator systems
Features & Benefits
- Can be sheared to allow free rotation
- Maximum bypass
- Simple installation and redress
- High-quality bearing ring
For more information on the E-Swivel Slim One-Way, please visit: http://eotools.com/index.php/component/virtuemart/277/1/artificial-lift/e-swivel-slim-one-way-detail
Both the Evolution E-Swivel Slim One-Way and the Evolution E-Swivel Slim Two-Way have been designed to be run in conjunction with tubing rotator systems on pumping wells that utilize a progressive cavity pump and a torque anchor or a rod pump with a tension anchor.
Applications
- Setting torque anchors
- Used with tubing rotator systems
Features & Benefits
- Can be sheared to allow free rotation
- Maximum bypass
- Simple installation and redress
- High-quality bearing ring
For more information on the E-Swivel Slim One-Way, please visit: http://eotools.com/index.php/component/virtuemart/277/1/artificial-lift/e-swivel-slim-one-way-detail
Both the Evolution E-Swivel Slim One-Way and the Evolution E-Swivel Slim Two-Way have been designed to be run in conjunction with tubing rotator systems on pumping wells that utilize a progressive cavity pump and a torque anchor or a rod pump with a tension anchor.
Applications
- Setting torque anchors
- Used with tubing rotator systems
Features & Benefits
- Can be sheared to allow free rotation
- Maximum bypass
- Simple installation and redress
- High-quality bearing ring
For more information on the E-Swivel Slim One-Way, please visit: http://eotools.com/index.php/component/virtuemart/277/1/artificial-lift/e-swivel-slim-one-way-detail
E-Swivel Slim One-Way Setting anchors with ease with minimal overall diameter
Applications Progressive cavity pumps with anti-rotation anchors Setting tubing anchors Used in conjunction with surface tubing rotators Features Maximum bypass Operates in both tension and compression Built-in clutch system will not allow swivel to freely rotate if the tubing anchor fails Large bore for minimal fluid flow restriction Simple shear replacement feature Available in different materials and threads on request.
Note The E-Swivel Slim One-Way must be run above the stator and the tubing anchor
Description The Evolution E-Swivel Slim One-Way is designed to be run in conjunction with the Evolution Tubing Rotator on pumping wells that utilize a progressive cavity pump and an anti-rotation anchor.
The Slim One-Way design has all the same features as our CDHS Swivel, but is used in applications where a smaller OD is called for.
The E-Swivel Slim One-Way has a shear release that allows the anti-rotation anchor to be set. In addition, the swivel has a built-in clutch system that will not allow the swivel to freely rotate if the anti-rotation anchor fails. Operation This tool does not function as a swivel until the shear screws are sheared. Rotation to the right sets the tubing anchor. Once the anchor is set, continued torque shears the screws allowing free rotation to the right.
The clutch features three ratchet pins that create the ratcheting effect allowing the swivel to rotate freely to the right while disallowing left hand rotation. This locking allows for tools to be set and unset below. Once in place, the tubing freely swivels to the right but locks the tubing to the left.
This document is uncontrolled when printed. 2014 Evolution Oil Tools Inc. All rights reserved. www.eotools.com Toll Free: 1-800-265-TOOL 262-SLIM-TDS_Rev-A (E-Swivel Slim One-Way) September 2014 Artificial Lift
CANADA #3, 1820 30 th Ave NE Calgary, Alberta T2E 7M5 Toll Free: 1-800-265-TOOL (8665) Main: 403-243-1442 Fax: 403-258-2614
6415A 63 St. Close Lloydminster, Alberta Tel: 780-875-1570 Cell: 780-522-8294 Cell: 780-870-1126