The Slimhole CDHS Clutched Down Hole Swivel is designed to be run in conjunction with the Evolution Tubing Rotator on pumping wells that utilize a progressive cavity pump and an anti-rotation anchor. The Slimhole design has all the same features as our CDHS Swivel, but is used in applications where a smaller OD is called for.
See more at: http://eotools.com/index.php/component/virtuemart/275/25/artificial-lift/tubing-swivels/cdhs-clutched-downhole-swivel-19-205-detail#sthash.9eleymP2.dpuf
The Slimhole CDHS Clutched Down Hole Swivel is designed to be run in conjunction with the Evolution Tubing Rotator on pumping wells that utilize a progressive cavity pump and an anti-rotation anchor. The Slimhole design has all the same features as our CDHS Swivel, but is used in applications where a smaller OD is called for.
See more at: http://eotools.com/index.php/component/virtuemart/275/25/artificial-lift/tubing-swivels/cdhs-clutched-downhole-swivel-19-205-detail#sthash.9eleymP2.dpuf
The Slimhole CDHS Clutched Down Hole Swivel is designed to be run in conjunction with the Evolution Tubing Rotator on pumping wells that utilize a progressive cavity pump and an anti-rotation anchor. The Slimhole design has all the same features as our CDHS Swivel, but is used in applications where a smaller OD is called for.
See more at: http://eotools.com/index.php/component/virtuemart/275/25/artificial-lift/tubing-swivels/cdhs-clutched-downhole-swivel-19-205-detail#sthash.9eleymP2.dpuf
2014 Evolution Oil Tools Inc. All rights reserved.
www.eotools.com Toll Free: 1-800-265-TOOL 262-SLIM-TDS_Rev-A (Slimhole Clutched Down Hole Swivel) May 2014 Artificial Lift
Slimhole Clutched Down Hole Swivel Setting anchors with ease with minimal overall diameter
Applications Progressive cavity pumps with anti-rotation anchors Setting tubing anchors Features Small overall OD Operates in both tension and compression Built-in clutch system will not allow swivel to freely rotate if the tubing anchor fails Large bore for minimal fluid flow restriction Simple shear replacement feature Available in different materials and threads on request.
Note The Slimhole CDHS must be run above the stator and the tubing anchor
Description The Evolution Slimhole CDHS Clutched Down Hole Swivel Assembly is designed to be run in conjunction with the Evolution Tubing Rotator on pumping wells that utilize a progressive cavity pump and an anti-rotation anchor.
The Slimhole design has all the same features as our CDHS Swivel, but is used in applications where a smaller OD is called for.
The CDHS has a shear release that allows the anti-rotation anchor to be set. In addition, the CDHS has a built-in clutch system that will not allow the swivel to freely rotate if the anti- rotation anchor fails. Operation This tool does not function as a swivel until the shear screws are sheared. Rotation to the right sets the tubing anchor. Once the anchor is set, continued torque shears the screws allowing free rotation to the right.
The clutch features a set of four ratchet grooves with ratchet pins that create the ratcheting effect allowing the swivel to rotate freely to the right while disallowing left hand rotation.
Specifications Casing OD Product Number Tool OD Tool ID Tool Length Connection Inch mm Inch mm Inch mm Inch mm 7 177.8 TBA 4.50 114.3 3.00 76.2 25.50 647.7 3 EU *Other sizes available on request
Slimhole Clutched Down Hole Swivel
www.eotools.com
CANADA #3, 1820 30 th Ave NE Calgary, Alberta T2E 7M5 Toll Free: 1-800-265-TOOL (8665) Main: 403-243-1442 Fax: 403-258-2614
6415A 63 St. Close Lloydminster, Alberta Tel: 780-875-1570 Cell: 780-522-8294 Cell: 780-870-1126