The document summarizes changes made between versions of the ASTM D256-06AE1 standard test method for determining the Izod pendulum impact resistance of plastics.
Key changes include:
- Adding a reference to test method ASTM D5947 for measuring physical dimensions.
- Adding paragraphs detailing requirements for micrometers to measure specimen width and depth under the notch.
- Revising paragraphs 7.4 and 10.6.
Subsequent versions saw minor revisions to paragraphs and notes, as well as editorial corrections. The general goal of changes was to provide more detailed guidance on specimen preparation and measurement techniques.
The document summarizes changes made between versions of the ASTM D256-06AE1 standard test method for determining the Izod pendulum impact resistance of plastics.
Key changes include:
- Adding a reference to test method ASTM D5947 for measuring physical dimensions.
- Adding paragraphs detailing requirements for micrometers to measure specimen width and depth under the notch.
- Revising paragraphs 7.4 and 10.6.
Subsequent versions saw minor revisions to paragraphs and notes, as well as editorial corrections. The general goal of changes was to provide more detailed guidance on specimen preparation and measurement techniques.
The document summarizes changes made between versions of the ASTM D256-06AE1 standard test method for determining the Izod pendulum impact resistance of plastics.
Key changes include:
- Adding a reference to test method ASTM D5947 for measuring physical dimensions.
- Adding paragraphs detailing requirements for micrometers to measure specimen width and depth under the notch.
- Revising paragraphs 7.4 and 10.6.
Subsequent versions saw minor revisions to paragraphs and notes, as well as editorial corrections. The general goal of changes was to provide more detailed guidance on specimen preparation and measurement techniques.
IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS Y VERSIONES ANTERIORES CAMBIOS CON RESPECTO A LA VERSIN 2003: Se agreg referencia al mtodo ASTM D5947 Test Methods for Physical Dimensions of Solid Plastic Specimens. Se agregaron los prrafos 6.13 y 10.6: 6.13 Micrometerspparat!s for meas!rement of the "idth of the specimen shall comply "ith the re#!irements of Test Methods D 5947. pparat!s for the meas!rement of the depth of plastic material remainin$ in the specimen !nder the notch shall comply "ith re#!irements of Test Methods D 5947% pro&ided ho"e&er that the one an&il or presser foot shall 'e a tapered 'lade conformin$ to the dimensions $i&en in (i$. 5. The opposin$ an&il or presser foot shall 'e )at and conformin$ to Test Methods D 5947. 1*.6 Meas!re and record the depth of material remainin$ in the specimen !nder the notch of each specimen to the nearest *.*+5 mm ,*.**1 in.-. The tapered 'lade "ill 'e .tted to the notch. The specimen "ill 'e appro/imately &ertical 'et"een the an&ils. (or specimens "ith a draft an$le% position ed$e of the non0ca&ity 1"ider ed$e2 s!rface centered on the micrometer3s )at circ!lar an&il. Reisin de los prrafos !." y 10.#. CAMBIOS CON RESPECTO A LA VERSIN 2004: Se agreg la nota n$mero 13: 45T6 137hile s!'section 7.5 re#!ires perpendic!lar pairs of plane parallel s!rfaces% the common practice has 'een to accept the non0 parallel drafted s!rfaces formed "hen directly in8ection moldin$ specimens for 9:od testin$. ;sers m!st 'e a"are that employin$ a trape:oidal section rather than a rectan$!lar section may lead to data shifts and scatter. ;ne#!al stress% created 'y clampin$ in the fract!re re$ion and dynamic t"istin$% ca!sed 'y !ne&en stri<in$ of the specimen are prone to occ!r "hen the faces of the specimen are not parallel. 9nterla'oratory comparisons m!st clearly spell o!t the specimen preparation conditions. Se reis el prrafo %.& CAMBIOS CON RESPECTO A LA VERSIN 2005: Se reisaron los n$merales #.&' #.3.%' 6.1' 6.10' 6.11' 10.3.1' 10.% y nota &1. Se reali(aron correcciones editoriales en 1.1 y los t)t$los en las ta*las 1 y &: 1.1 These test methods co&er the determination of the resistance of plastics to =standardi:ed> 1see 4ote 12 pend!l!mtype hammers% mo!nted in =standardi:ed> machines% in 'rea<in$ standard specimens "ith one pend!l!m s"in$ 1see 4ote +2. The standard tests for these test methods re#!ire specimens made "ith a milled notch 1see 4ote 32. 9n Test Methods % ?% and D% the notch prod!ces a stress concentration that increases the pro'a'ility of a 'rittle% rather than a d!ctile% fract!re. 9n Test Method 6% the impact resistance is o'tained 'y re&ersin$ the notched specimen 1@*A in the clampin$ &ise. The res!lts of all test methods are reported in terms of ener$y a'sor'ed per !nit of specimen "idth or per !nit of cross0sectional area !nder the notch. 1See 4ote 4.2 TBC6 1 Precision Data% Test Method 4otched 9:od TBC6 + Precision Data% Test Method ?4otched 9:od CAMBIOS CON RESPECTO A LA VERSIN 2005a: Reisin de n$merales 6.10' 6.13' y 10.3.". +orreccin editorial en ,ig. 6: CAMBIOS CON RESPECTO A LA VERSIN 2006: Se reis el n$meral !.6 para agregar =notchin$ operations> como *ase para la reisin de las caracter)sticas de las m$escas y los cam*ios permisi*les para la frec$encia de inspeccin: notchin$ operation notches one or more specimens pl!s the =d!mmy 'ar> at a sin$le pass thro!$h the notcher. The specimen notch prod!ced 'y each c!tter "ill 'e e/amined after e&ery 5** notchin$ operations or less fre#!ently if e/perience sho"s this to 'e accepta'le. The notch in the specimen% made of the material to 'e tested% shall 'e inspected and &eri.ed. 5ne proced!re for the inspection and &eri.cation of the notch is presented in ppendi/ D1. 6ach type of material 'ein$ notched m!st 'e inspected and &eri.ed at that time. 9f the an$le or radi!s does not fall "ithin the speci.ed limits for materials of satisfactory machinin$ characteristics% then the c!tter shall 'e replaced "ith a ne"ly sharpened and honed one. 1See 4ote 19.2 Reis: -iego .aier /me( /$tirre(. +oordinador de Sericios 0 1a*oratorios de Materiales y Man$fact$ra 2.3ng.' M.Sc. 4ngenieria Mecnica