Professional Documents
Culture Documents
Needle Valves Manufacturers, Industrial Valves Manufacturer, Ne..
Needle Valves Manufacturers, Industrial Valves Manufacturer, Ne..
html
- Union Fittings Needle Valves | 2 Way Manifold Valves | 3 Way Manifold Valves | 5 Way Manifold
Valves | Ball Valves
- Tee Fittings
Valve Fittings
Needle Valves
- Ball Valves
Hydro Tests :
Performed with pure water at 1-1/2 Liters of the working pressure. Other tests like Helium,
Pipes and Tubes Sesmic are available upon request.
Forged Fittings
End Connections :
Butt-Weld Fittings Variety of end connections ¼'' to 1'' NPT, BSP male or female threaded or ¼'', 3/8'', ½''
Panam single or twin ferrule tube fitting ends.
Fasteners
Round Bars
Plates / Sheets
1 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Material of Construction
Sr. Description Qty. Material
1 Body 1 AISI 316 SS./ CS.
2 Ball 1 AISI 316 SS./ CS.
3 Packing 2 PTFE/ POM
4 'O' Ring 2 VITON/ BUNA-N
5 Adaptors 2 AISI 316 SS./ CS.
6 Spindle 1 AISI 316 SS./ CS.
7 'O' Ring 1 VITON/ BUNA-N
8 Handle 1 Nylon
9 Lock Pin 1 AISI 316 SS./ CS.
10 Gland Nut 1 AISI 316 SS./ CS.
11 Panel Nut 1 AISI 316 SS./ CS.
12 Nut 2 AISI 316 SS./ CS.
13 Ferrule Set 2 AISI 316 SS./ CS.
Table of Dimensions
Size L H Part No.
BSP/ NPT
¼'' 78 50 PBV4 O.D
3/8'' 85 50 PBV6 O.D
1/2'' 102 60 PBV8 O.D
3/4'' 115 60 PBV12 O.D
1'' 140 70 PBV16 O.D
» request a quote
2 Valve manifold pipe to flange design for separate mounting. Connecting system impulse
lines and transmitters. Having simple two valve configuration which allows for easy block,
bleed & calibration of a static pressure transmitter or gauge.
Features :
Testing :
Pneumatic Test : Each valve is tested with nitrogen at 100 Psi in accordance
with MSS - SP- 61 for seat & Packing leakage.
2 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Hydro Test : Performed with pure water in accordance with MSS-SP-61. Body
tested at 1.5 times & seat leakage tested at 1.1 times of the working pressure.
Design Standard :
Revision
Title :- 2-Valve Manifold (Pipe to Flange)
DRN. CDC Scale - N.T.S.
CHD. QC. Date - 25-05-2003
APPD. BLC DRG. No. : 2 WM - SS - 8 - T RO
Technical Data
Seat Pr. Rat. Temp. Rat. Cv Orifice
Metal 6000 PSI PTFE - 20 to 250° F Grafoil -20 to 600° F 0.52 4.8
Seat (41300 kpa) (-29° to 121° C) (-29° to 315° C) max. mm.
Note :
1. Dimensions are in mm. For reference only, subject to change.
2. Approximate weight : 0.95 KG. (2.1 LBS)
Material of Constructions
Sr. Description Qty. Material
1 Body 1 A479 – 316
2 Bonnet 2 A479 – 316
3 Gland Retainer 2 A479 – 316
4 Washer 2 A479 – 316
5 Packing 2 PTFE / Grafoil
6 Packing Washer 2 A479 – 316
7 Spindle 2 A479 – 316
8 Lock Nut 2 A479 – 316
9 Grub Screw 2 Steel
10 Handle 2 A479 – 316
11 Lock Pin 2 A479 – 316
12 Dust Cap 2 Plastic LD.
13 Washer 2 A479 – 316
14 Non Rotating VEE Tip 2 A564 – 630
» request a quote
3 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Features :
BSI 3 Valve manifold T- type pipe to flange connection design for connecting system impulse lines and transmitters. This manifold
consists to ½'' NPT female connections on 54mm (2-18'') centers and of the equalizer valve and two block valves ¼'' NPT purge
connections are optional.
Physical Features :
Testing :
Pneumatic Test : Each valve is tested with nitrogen at 100 Psi in accordance with
MSS - SP- 61 for seat & Packing leakage.
Hydro Test : Performed with pure water in accordance with MSS-SP-61. Body
tested at 1.5 times & seat leakage tested at 1.1 times of the working pressure.
Design Standard :
4 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
5- Valve manifold T- type pipe to flange connection design for connecting system impulse lines and transmitters. This manifold consists
to ½'' NPT female connections on 54mm (2-1/8'') centers and of two equalizer valve, Two block valves & onevent valve.
Features :
Testing :
Pneumatic Test : Each valve is tested with nitrogen at 100 Psi in accordance
with MSS - SP- 61 for seat & Packing leakage.
Hydro Test : Performed with pure water in accordance with MSS-SP-61. Body
tested at 1.5 times & seat leakage tested at 1.1 times of the working pressure.
Design Standard :
Plan
Technical Data
Seat Pr. Rat. Temp. Rat. Cv Orifice
Metal 6000 PSI PTFE - 20 to 250° F Grafoil -20 to 600° F 0.52 4.8
Seat (41300 kpa) (-29° to 121° C) (-29° to 315° C) max. mm.
Note :
1) Dimensions are in mm. For reference only, subject to change.
2) Approximate weight : 2.45 KG
Material of Constructions
Sr. Description Qty. Material
1 Body 1 A479 – 316
2 Bonnet 5 A479 – 316
3 Gland Retainer 5 A479 – 316
4 Washer 5 A479 – 316
5 Packing 5 PTFE / Grafoil
6 Packing Washer 5 A479 – 316
7 Spindle 5 A479 – 316
8 Lock Nut 5 A479 – 316
9 Grub Screw 5 Steel
10 Handle 5 A479 – 316
11 Lock Pin 5 A479 – 316
5 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Ball Valves
Features :
SS 316 construction for corrosion resistance, full or reduced bore for excellent flow. Flexible 3 piece design. Anti blow out internally
loaded stem for safety. 90° smooth action operation pipe seats for ease of use and minimum maintenance.
Physical Features :
Pressure Rating 400 Kg/ CM2
Material Options :
SS 316, Carbon Steel, Aluminum, Bronze, Hastalloy Monel, etc. Optional KEL-F, Polyaman packing available with high pressure valves.
Standards :
BS 5750
Tests :
Each Valve is tested with Nitrogen at 1000 PSI for Seat and Seal Leakage with a leakage rate of 0.1 Sec / Min.
Hydro Tests :
Performed with pure water at 1-1/2 Liters of the working pressure. Other tests like Helium, Sesmic are available upon request.
End Connections :
Variety of end connections ¼'' to 1'' NPT, BSP male or female threaded or ¼'', 3/8'', ½'' Panam single or twin ferrule tube fitting ends.
Material of Construction :
6 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Table of Dimensions :
Size
L H Part No.
BSP/ NPT
¼'' 78 50 PBV4 O.D
3/8'' 85 50 PBV6 O.D
1/2'' 102 60 PBV8 O.D
3/4'' 115 60 PBV12 O.D
» request a quote
Syphon Tube
BSI Syphons can be used to protect instruments from higher temperature & direct contact of live medium with instruments. These are
manufactured in carbon Steel, Stainless Steel & Alloy Steel with butt weld or Threaded Ports.
7 of 8 7/29/2008 12:12 AM
Needle Valves Manufacturers,Industrial Valves Manufacturer,Needle Va... http://www.tubefittings.in/valve-fittings.html
Tube Fittings Elbow Fittings | Straight Fittings | Tee Fittings | Union Fittings
Ball Valves | Needle Valves | 2 Way Manifold Valves | 3 Way Manifold Valves | 5
Valve Fittings
Way Manifold Valves
We Are Stockist Pipes and Tubes | Forged Fittings | Butt-Weld Fittings | Fasteners | Round Bars |
of Plates / Sheets
8 of 8 7/29/2008 12:12 AM