You need: silk satin or thick sateen, share fatin (of
two tinctures, for example, of lacteous white and cream white); zipper, fusing, metal/plastic bones, ready underskirt (of stiff fatin), lace border of 1.!" cm width.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED, IF THE PATTERNS HAVE SINLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED!
#eam allowances$ 1 cm for all seams.
ATTENTION" %efore sewing, print paper patterns and lay them out according to the linen width (minimal width is 1& cm) to find out how much material you need (do not forget about double and symmetric details). '()* #)'+*,, %) -./)012 '+3( *43-()# 5 3()6 71#3 %) -4+*-+8+*,9 :2).#) ;)): %).7 3(/).8 8+/)-3+4*.
0atin$ 1. 0lounce>1$ ?uantity will be gi@en on the piece. (0or example, kd!A. 0or better cutting you can fold fatin se@eral times.) ". 0lounce>"$ ?uantity will be gi@en on the piece. (0or example, kd!B. 0or better cutting you can fold fatin se@eral times.) <. 0ront skirtCs lower frill 5 1 piece =. %ack skirtCs lower frill 5 " pieces . .ll bodice details
3rimming$ you need lace border of 1.!" cm width to trim (o@erlap) seams. 6ou need also satin piping to trim bones.
INSTRUCTIONS:
1. .ll front upper pieces are of < layers of fatin (to make them less transparent and stiff). +t is better to take sheer and not too stiff fatin.
". .ll bodice seams are to be o@erlapped along inner/outer sides with satin piping; set into this piping metallic/plastic bones which are " cm shorter than seam length (to make sewing more comfortable).
<. #titch satin piping (long pattern lines) on front middle/center back pieces to made them less transparent. #titch lace border on sides along shaped lines.
=. 4@erlap all bodice seams additionally with the lace borders.
. 1pper fatin skirt$ stitch flounces to skirt upper piece along marking. ,ather lower frill a little and stitch it to upper skirt pieceCs lower edge.
D. #titch the flounce>" (narrower) along lines between the line Eoining the skirt to the bodice and the sixth line of the skirt. 3hen stitch on the flounce>1 (wider) only.
A. -ut flounces with seam allowances. -ut a flounce along FcuttingG line, lay it flat, then stitch on the skirt along inside diameter, one after another, lea@ing all s?uareHs ends free (see picture).