This document contains a 40-item multiple choice test on technology and home economics. The test covers topics like drafting tools, lettering styles, technical drawing guidelines, and measurement systems. It assesses knowledge of key concepts in drafting, sketching, dimensioning, and converting between metric and imperial units.
This document contains a 40-item multiple choice test on technology and home economics. The test covers topics like drafting tools, lettering styles, technical drawing guidelines, and measurement systems. It assesses knowledge of key concepts in drafting, sketching, dimensioning, and converting between metric and imperial units.
This document contains a 40-item multiple choice test on technology and home economics. The test covers topics like drafting tools, lettering styles, technical drawing guidelines, and measurement systems. It assesses knowledge of key concepts in drafting, sketching, dimensioning, and converting between metric and imperial units.
Directions: Read and analyze the test items below. Write the letter that corresponds to your answer on the space provided for at the right margin.
1. These are the most commonly used tool of a draftsman. 1.________ a. Protractors c. Compass b. Pencils d. T-square
2. Used to divide distances into a number of equal parts 2.________ and to transfer measurement and spacing points or lines. a. Tape c. Triangle b. Drawing board d. Divider
3. What tool should you use if you want to draw a vertical 3.________ and oblique lines? a. Triangle c. French curve b. Protractor d. Triangle scale
4. Lito is a draftsman and he wants to draw a gothic letter style. 4.________ What kind of drafting tool should he use to attain that kind of Letter style? a. Ballpen c. Speedball pen b. Pencil d. Mechanical pencil
5. Used are light lines that regulates the height and keep letters 5.________ uniformly vertical or inclined. a. Draw lines c. Letter lines b. Numeric lines d. Guidelines
6. These are strokes of letters that extend up to the cup line. 6.________ a. Descenders c. Scopes b. Ascenders d. Drop lines
7. This refers to a letters that have four horizontal guide lines 7.________ called the cap line, waist line, base line and drop line. a. Numeric c. Lowercase b. Uppercase d. Lettercase
8. Below are the different parts of guidelines. Which of the following 8.________ is the uppermost thin line where uppercase and ascender letters must reach. a. Baseline c. Dropline b. Capline d. Waistline
9. Ana wants to be a good draftsman. To be a good draftsman 9.________ what must she practice? a. Keep letters uniformly vertical or inclined. b. Vertical guide lines should be continuous from the left to the right of the lettered are. c. The direction of the strokes and proportion of the Inclined capital letters and numerals should be different from the vertical characters. d. Letters without guidelines
10. Which of the following letters is the ascender? 10.________ a. e c. x b. y d. g 11. This is the widest letter in the alphabet. 11.________ a. Z c. X b. Y d. W
12. What letter occupy 6 units in the grid?. 12.________ a. B c. Z b. D d. T
13. Mrs. De Guzman is teaching the different proportions in writing 13.________ letters. Which of the following is used when the space is limited? a. Compressed c. Normal b. Extended d. Strip
14. The following are letters with six units wide EXCEPT. 14.________ a. B c. O b. M d. Q
15. The following is the basic steps in drawing an oblique sketch. 15.________ Arrange them in a correct order. I. Draw a rectangle of the front view using light lines. II. Sketch the remaining horizontal and vertical lines parallel to the other base lines. III. Draw an oblique base line at a 45 degree angle starting at the corner of the horizontal and vertical base lines. IV. Erase any unnecessary lines and darkened the completed drawing for easier reading.
a. II, I, III, IV c. I, III, II, IV b. I, III, IV, II d. III, IV, II, I
16. These are thin lines for lettering. 16._______ a. Capline c. Monoline b. Guidelines d. dropline
17. Which of the following measurements is commonly used in 17.________ Dimensioning the whole numbers? a. 3.2 mm c. 4.2 mm b. 3.4 mm d. 5.3 mm
18. Alan wants to draw a whole numbers and fractions. What 18.________ guide lines should he remember in drawing a fraction number? a. Use an inclined fraction bar. b. Let the numerals touch the fraction bar. c. Have a wide space between the whole number And fraction. d. Make the fraction bar slightly longer than the widest Point of the fraction.
19. The following are guide lines in drawing whole numbers and 19.________ fractions EXCEPT. a. The fractions must twice the height of the corresponding whole numbers. b. Make each numeration and the denominator about Three-fourth as high as the whole number to allow ample, clear space between them and the fraction bar. c. In dimensioning the height of a whole numbers should Be 1/8(3.2mm). d. Use an inclined farction bar when lettering in a wide space.
20. What type of lettering style refers to any letter that has wide 20._______ downward? a. Gothic c. Roman b. Italic d. Text
21. Which of the following is an example of a Gothic letter style? 21._______ a. A c. A b. A d. A
22. Mr. Lopez is making a tarpaulin for their upcoming foundation day. 22._______ He wants to emphasize the word Foundation Day in his tarpauline. Which of the following letter style is best for emphasizing words and letters? a. Arial c. Italic b. Gothic d. Roman
23. The following are the evolutions of a lettering style. Arrange them in 23._______ a correct order.
I. Egyptians developed pictures writing known as Hieroglyphics. II. Romans developed the Greek symbols into alphabet. III. Phoenicians developed fixed symbols. IV. The letters U, X, Y and W were developed in the late 17 th century.
a. I, III, II, IV c. II, III, IV, I b. I, II, IV, III d. IV, III, II, I
24. The various line symbols that have specific meaning 24._______ when used on technical drawing. a. Alphabet of lines c. Elements of lines b. Drafting of lines d. Measurements of lines
25. The following are the types of the Alphabet of lines. Which of the 25._______ following lines are used to locate centers of objects, arcs and circles? a. ____ ____ c. _ _ _ _ _ b. ___ _ _ ___ d. _________
26. Joe is drawing a three dimensional house. What type of alphabet of 26._______ lines should he use in order to have a shaded effect in his drawing? a. Section line d. Visible lines b. Short-break lines d. Whole lines
27. The following are the operations of a working sketch. Arrange them 27._______ in a correct order. I. Sketch the title block II. Check a working sketch III Make a working sketch of a detail part IV Make a working sketch of assembled parts
a. IV, III, I, II c. III, IV, I, II b. II, I, III, IV d. I, II, III, IV
28. What is the act of art measuring? 28._______ a. English system c. Metric System b. Mensuration d. Proportion
29. Which of the following measurements is equivalent to 12 centimeters 29._______ When converted in millimeters? a. 85 mm c. 110 mm b. 90 mm d. 120 mm
30. The following are measurements in metric units EXCEPT. 30._______ a. 25 mm c. 45 km. b. 35 cm d. 55 ft.
31. Mr. Valdez always used a metric scale in his sketch. How can this 31._______ metric scale is useful in sketching?. a. Using metric scales, a drawing can be made full size, Enlarge or reduced in size. b. With the use of scale, a drawing can be made colorful, and attractive. c. It keeps the proper proportion of the sketch. d. Used as an economical way of formulating various solutions to given thoughts.
32. What is the easiest way to plan out the drawing processes needed to 32._______ create complex object? a. Designing c. Scaling b. Lay-outing d. Sketching
33. Which of the following types of pencils is used in sketching? 33._______ a. Color pencil c. Mechanical pencil b. Graphite pencil d. Propelling pencil
34. Monicas brother is fond of making sketch and he always follow 34._______ the right procedures in making it. Which of the following Is the most important rule in a freehand sketching? a. Balance c. Contrast b. Complement d. Proportion
35. The following are materials used in freehand sketching EXCEPT. 35._______ a. Canvas d. Graphing paper b. Chipboard d. Mechanical pencil
36. The following are the steps in drawing circles in a freehand sketching. 36._______ Arrange them in a correct order.
I. Hold the pencil about 1 II. Draw heavily the arcs tangent. III. Draw light arcs tangent to the sides of the squares. IV. Draw lightly the enclosing square, making the midpoints of the side.
a. I, III, II, IV c. I, IV, III, II b. I, II, III, IV d. I, IV, II, III
37. What is the another name for multi-view drawing? 37._______ a. Detailed projection c. Orthographic projection b. Isometric projection d. Perspective projection
38. Below are the basic types of Pictorial drawing. Which one refers to a 38._______ sketching which shows an object as it appears to our eyes. a. Detailed sketching c. Oblique sketching b. Isometric sketching d. Perspective sketching
39. Ken wants to draw a 3D rectangular shaped model. What type of 39._______ oblique pictorial view should he use in order to see the exact dimension of the object he is drawing. a. Cabinet projection c. Cavalier projection b. Isometric projection d. Orthographic projection
40. The following are procedures in making Isometric circles. Arrange 40.________ them in o correct order.
I. Draw arcs using A and B as center. II. Draw arcs using x and y as the centers. III. Draw an isometric box using a 30x60 triangle. IV. Draw a 60 degree line from the upper and lower corner of the Isometric box.
a. IV, III, I, II c. II, I, III, IV b. III, IV, II, I d. I, II, IV, III