Professional Documents
Culture Documents
SPM Percubaan Physic (Section B)
SPM Percubaan Physic (Section B)
Transformer
Wave
Model
Shape of the
wall barrier
Depth of the
sea water
Gap between
the wall
barriers
Base between
the wall
barriers
P
Shallow
None
Small
Q
Deep
Large
Large
R
Shallow
None
Small
S
Deep
Small
Large
Explain the suitability of characteristic in Table 12. Determine the suitable model.
Give your reasons for your choice.
Most suitable is Q
Characteristic Reason
High amplitude
louder
Longer wavelength
Can diffract easily
Low damping
Can be heard clearly
Low frequency Low pitch/ distinguished from other
sound/can be heard by human
Electricity
Force and Pressure
Sugestion Reason
Cylinder with a larger diameter at the lower
part/diagram
To sink the hydrometer and prevent the
overturned .
Lead shots / diagram To enable it stand upright
Cylinder with small diameter at the top /
diagram
Small scale reading can be combined
Glass bulb at the lower part
Scale can be made larger or smaller from the
density of water
Filled with air / diagram
Can measure the density of the higher and
lower than the water
Hydrometer is placed in low density liquid Mark the low level
Hydrometer is placed in high density liquid Mark the high level
Electromagnet
Change cumutator by two slip rings/diagram current flow as a.c
Add the number of coils/diagram increase the induced current
Increase the thickness of wire reduce resistance /
more induced current.
Increase the strength of magnet increase the induce current
Curved magnet catapult field more stronge
Cylinder shaped iron core increase the strength of
electromagnet
Force and motion
Most suitable is C
Characteristic Reason / Explanation
Spring constant is small
More elastic
Density is small The spring is lighter
Elastic limit is high
Elastic for a large range of fore /
Can support the large force
The strength is high Can support the large force
Radioisotopes