The SKF TMMC pullers are especially designed for dismounting CARB(tm) bearings in drying cylinders. To avoid "self locking" the CARB (tm) requires the pulling force to be applied to the outer ring.
The SKF TMMC pullers are especially designed for dismounting CARB(tm) bearings in drying cylinders. To avoid "self locking" the CARB (tm) requires the pulling force to be applied to the outer ring.
The SKF TMMC pullers are especially designed for dismounting CARB(tm) bearings in drying cylinders. To avoid "self locking" the CARB (tm) requires the pulling force to be applied to the outer ring.
Instructions for use 1. Description The SKF TMMC pullers are especially designed for dismounting CARB bearings in drying cylinders. To avoid "self locking" the CARB requires the pulling force to be applied to the outer ring. Hence, the arms of the SKF TMMC puller will be inserted between the rollers and grip on the back of the outer ring. 2. Technical data TMMC 3040 TMMC 3140 TMMC 3044 Suitable for CARB bearing : C 3040 K C 3140 K C 3044 K Puller arm designation : TMMC A8.5 TMMC A10 TMMC A8.5 Number of arms : 3 3 3 Gripping diameter (mm/in) : 291/11,5 307/12,1 316/12,4 Arm reach length (mm/in) : 175/6,9 210/8,3 175/6,9 Claw length (mm/in) : 5,7/0,23 6,5/0,25 5,7/0,23 Thread of dismounting screws: M10 M10 M10 Maximum withdrawal force (kN/lbf) : 15/3.300 20/4.500 15/3.300 Weight (kg/lb) : 5,3/11,7 6,3/13,9 6,0/13,2 TMMC 3144 TMMC 3048 TMMC 3052 Suitable for CARB bearing : C 3144 K C 3048 K C 3052 K Puller arm designation : TMMC A10 TMMC A8.5 TMMC A10 Number of arms : 3 3 3 Gripping diameter (mm/in) : 334/13,1 334/13,1 368/14,5 Arm reach length (mm/in) : 210/8,3 175/6,9 210/8,3 Claw length (mm/in) : 6,5/0,25 5,7/0,23 6,5/0,25 Thread of dismounting screws: M10 M10 M10 Maximum withdrawal force (kN/lbf) : 20/4.500 15/3.300 20/4.500 Weight (kg/lb) : 7,0/15,4 6,5/14,3 7,5/16,5 TMMC 3152 TMMC 3156 TMMC 3160 Suitable for CARB bearing : C 3152 K C 3156 K C 3160 K Puller arm designation : TMMC A13 TMMC A13 TMMC A13 Number of arms : 3 3 3 Gripping diameter (mm/in) : 391/15,4 414/16,3 447/17,6 Arm reach length (mm/in) : 250/9,9 250/9,9 250/9,9 Claw length (mm/in) : 9,5/0,37 9,5/0,37 9,5/0,37 Thread of dismounting screws: M10 M10 M10 Maximum withdrawal force (kN/lbf) : 25/5.600 25/5.600 25/5.600 Weight (kg/lb) : 9,4/20,7 9,8/21,6 10,6/23,4 2 SKF TMMC 3. Dismounting instructions of the CARB in drying cylinders 1. Dismount the end cover and remove the inboard cover. 2. Unload the bearing by gently lifting the cylindrical journal. The bearing is unloaded when all bearing rollers can be moved by hand. 3. Reposition the SKF lock nut 3 - 4 mm (0,1 - 0,2 in) from the bearing (see figure 1). Do not remove the SKF locking nut! 4. Release the bearing from the shaft by using the SKF oil injection method (see figure 1). 5. Dismount the lock nut. 6. Insert the three puller arms, in positions approximately 4,8 and 12 oclock, between the bearing cage and the outer ring. Connect the puller arms to the puller plate (see figure 2). 7. Extract the bearing by applying force on the puller plate (if necessary by use of the dismounting screws). Figure 1. Reposition the lock nut before releasing the bearing from the shaft. Figure 2. Insertion of the puller arms between bearing cage and the outer ring. CARB TM bearing Lock nut SKF Hydraulic pump (e.g. 729124) SKF Puller TMMC.. SKF TMMC 3 4. Maintenance 4.1 General Protect the puller against corrosion. Lubricate the threads of the dismounting screws regularly. 4.2 Replacement parts Designation Description TMMC A8.5 Puller arm - reach 175 mm TMMC A10 Puller arm - reach 210 mm TMMC A13 Puller arm - reach 250 mm TMMC 3040-1 Puller plate for TMMC 3040 TMMC 3140-1 Puller plate for TMMC 3140 TMMC 3044-1 Puller plate for TMMC 3044 TMMC 3144-1 Puller plate for TMMC 3144 TMMC 3048-1 Puller plate for TMMC 3048 TMMC 3052-1 Puller plate for TMMC 3052 TMMC 3152-1 Puller plate for TMMC 3152 TMMC 3156-1 Puller plate for TMMC 3156 TMMC 3160-1 Puller plate for TMMC 3160 M P 5 3 3 E / 9 6 0 8 In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. SKF Maintenance Products B.V. Copyright SKF 1996