Professional Documents
Culture Documents
StructuralAnalysisView IFC2x3 Binding
StructuralAnalysisView IFC2x3 Binding
APPLICATION NAME
Generic
APP. VERSION
N/A
- IFC2x3
Building
- IFC2x3
Building Storey
- IFC2x3
Project
- IFC2x3
Site
- IFC2x3
EXCHANGE TYPE
Generic
DIAGRAM AUTHORS
Sakari Lehtinen
VBL-407 - IFC2x3
VBL-340 - IFC2x3
VBL-343 - IFC2x3
VBL-406 - IFC2x3
VBL-445 - IFC2x3
VBL-202 - IFC2x3
Aggregates Buildings
VBL-416 - IFC2x3
VBL-265 - IFC2x3
VBL-344 - IFC2x3
Material Name
VBL-185 - IFC2x3
VBL-448 - IFC2x3
VBL-342 - IFC2x3
Applied Load
VBL-338 - IFC2x3
VBL-449 - IFC2x3
VBL-231 - IFC2x3
VBL-337 - IFC2x3
VBL-360 - IFC2x3
VBL-446 - IFC2x3
VBL-235 - IFC2x3
VBL-171 - IFC2x3
VBL-447 - IFC2x3
Name
VBL-233 - IFC2x3
VBL-156 - IFC2x3
VBL-207 - IFC2x3
VBL-411 - IFC2x3
VBL-339 - IFC2x3
VBL-208 - IFC2x3
Building Attributes
Surface Type
VBL-198 - IFC2x3
VBL-336 - IFC2x3
VBL-209 - IFC2x3
Thickness
VBL-412 - IFC2x3
VBL-211 - IFC2x3
VBL-206 - IFC2x3
Building Name
Planar Force
VBL-413 - IFC2x3
VBL-212 - IFC2x3
VBL-219 - IFC2x3
VBL-414 - IFC2x3
VBL-329 - IFC2x3
VBL-218 - IFC2x3
VBL-223 - IFC2x3
VBL-221 - IFC2x3
VBL-204 - IFC2x3
Topological Representation
VBL-222 - IFC2x3
VBL-220 - IFC2x3
VBL-205 - IFC2x3
VBL-182 - IFC2x3
VBL-296 - IFC2x3
VBL-234 - IFC2x3
Project Attributes
VBL-183 - IFC2x3
VBL-403 - IFC2x3
Project Name
VBL-404 - IFC2x3
VBL-359 - IFC2x3
Generic Aggregation
Project Units
VBL-232 - IFC2x3
VBL-163 - IFC2x3
Services Buildings
VBL-268 - IFC2x3
VBL-203 - IFC2x3
Generic Assignments
Shape Representation
VBL-258 - IFC2x3
VBL-332 - IFC2x3
Generic Associations
Single Force
VBL-157 - IFC2x3
VBL-310 - IFC2x3
Site Attributes
VBL-174 - IFC2x3
VBL-410 - IFC2x3
Generic Loaded by
Site Name
VBL-200 - IFC2x3
VBL-451 - IFC2x3
VBL-201 - IFC2x3
VBL-154 - IFC2x3
VBL-199 - IFC2x3
VBL-164 - IFC2x3
VBL-197 - IFC2x3
VBL-165 - IFC2x3
VBL-170 - IFC2x3
VBL-159 - IFC2x3
GUID
VBL-175 - IFC2x3
VBL-155 - IFC2x3
Has Results
VBL-361 - IFC2x3
VBL-450 - IFC2x3
VBL-331 - IFC2x3
VBL-236 - IFC2x3
VBL-335 - IFC2x3
VBL-181 - IFC2x3
Linear Force
- IFC2x3
Project
Generic
Generic
VBL-296 - IFC2x3
VBL-170 - IFC2x3
Project Attributes
GUID
Draft
3.10.2007
Jiri Hietanen
VBL-403 - IFC2x3
Project Name
VBL-359 - IFC2x3
VBL-360 - IFC2x3
Project Units
VBL-406 - IFC2x3
Generic Aggregation
Aggregates Buildings
VBL-407 - IFC2x3
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
- IFC2x3
Site
Generic
VBL-310 - IFC2x3
VBL-170 - IFC2x3
Site Attributes
GUID
Generic
Proposal
3.10.2007
Jiri Hietanen
VBL-410 - IFC2x3
Site Name
VBL-404 - IFC2x3
VBL-406 - IFC2x3
Generic Aggregation
Aggregates Buildings
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Structural design to
structural analysis
- IFC2x3
Building
Generic
Generic
VBL-411 - IFC2x3
VBL-170 - IFC2x3
Building Attributes
GUID
Proposal
3.10.2007
Jiri Hietanen
VBL-412 - IFC2x3
Building Name
VBL-404 - IFC2x3
VBL-407 - IFC2x3
Generic Aggregation
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Building Storey
Structural design to
structural analysis
Generic
Generic
VBL-413 - IFC2x3
VBL-170 - IFC2x3
GUID
Proposal
3.10.2007
Jiri Hietanen
VBL-414 - IFC2x3
VBL-416 - IFC2x3
Generic Aggregation
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
COVER PAGE
- IFC2x3
Generic
N/A
Generic
VBL-154 - IFC2x3
VBL-170 - IFC2x3
GUID
Proposal
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-155 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-174 - IFC2x3
VBL-445 - IFC2x3
Generic Loaded by
VBL-175 - IFC2x3
Has Results
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-158 - IFC2x3
Generic Assignments
Generic Grouping
VBL-159 - IFC2x3
System
VBL-161 - IFC2x3
Zone
VBL-163 - IFC2x3
VBL-164 - IFC2x3
Services Buildings
VBL-167 - IFC2x3
VBL-168 - IFC2x3
Nesting
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
COVER PAGE
- IFC2x3
Generic
N/A
Generic
Proposal
VBL-181 - IFC2x3
VBL-170 - IFC2x3
GUID
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-182 - IFC2x3
VBL-157 - IFC2x3
VBL-158 - IFC2x3
Generic Assignments
Generic Grouping
VBL-159 - IFC2x3
VBL-329 - IFC2x3
VBL-220 - IFC2x3
VBL-198 - IFC2x3
VBL-221 - IFC2x3
VBL-258 - IFC2x3
VBL-199 - IFC2x3
VBL-337 - IFC2x3
Generic Associations
VBL-265 - IFC2x3
Material Name
VBL-201 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-205 - IFC2x3
Shape Representation
Topological Representation
COVER PAGE
- IFC2x3
Generic
N/A
Generic
Proposal
VBL-207 - IFC2x3
VBL-170 - IFC2x3
GUID
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-208 - IFC2x3
Surface Type
VBL-209 - IFC2x3
Thickness
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-158 - IFC2x3
Generic Assignments
Generic Grouping
VBL-183 - IFC2x3
VBL-329 - IFC2x3
VBL-159 - IFC2x3
VBL-331 - IFC2x3
VBL-220 - IFC2x3
VBL-224 - IFC2x3
VBL-258 - IFC2x3
VBL-199 - IFC2x3
VBL-339 - IFC2x3
Generic Associations
VBL-200 - IFC2x3
VBL-265 - IFC2x3
Material Name
VBL-201 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-218 - IFC2x3
Shape Representation
Topological Representation
COVER PAGE
- IFC2x3
Generic
N/A
VBL-231 - IFC2x3
VBL-170 - IFC2x3
GUID
Generic
Proposal
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-159 - IFC2x3
Generic Assignments
VBL-183 - IFC2x3
VBL-450 - IFC2x3
VBL-220 - IFC2x3
VBL-233 - IFC2x3
VBL-201 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-234 - IFC2x3
Shape Representation
Topological Representation
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
COVER PAGE
Generic
N/A
Generic
Proposal
03.10.2007
Sakari Lehtinen
- IFC2x3
VBL-236 - IFC2x3
VBL-170 - IFC2x3
GUID
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-159 - IFC2x3
Generic Assignments
VBL-183 - IFC2x3
VBL-329 - IFC2x3
VBL-222 - IFC2x3
VBL-235 - IFC2x3
VBL-201 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-205 - IFC2x3
Shape Representation
Topological Representation
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
- IFC2x3
Generic
N/A
Generic
VBL-342 - IFC2x3
VBL-170 - IFC2x3
GUID
Proposal
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-159 - IFC2x3
Generic Assignments
VBL-183 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-234 - IFC2x3
Shape Representation
Topological Representation
VBL-185 - IFC2x3
VBL-332 - IFC2x3
Applied Load
Single Force
VBL-334 - IFC2x3
Single Displacement
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
- IFC2x3
Generic
N/A
VBL-343 - IFC2x3
VBL-170 - IFC2x3
GUID
Generic
Proposal
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-159 - IFC2x3
Generic Assignments
VBL-183 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-205 - IFC2x3
Shape Representation
Topological Representation
VBL-335 - IFC2x3
Applied Load
Linear Force
VBL-340 - IFC2x3
Temperature Load
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
- IFC2x3
Generic
N/A
Generic
VBL-344 - IFC2x3
VBL-170 - IFC2x3
GUID
Proposal
03.10.2007
Sakari Lehtinen
VBL-171 - IFC2x3
Name
VBL-172 - IFC2x3
Description
VBL-173 - IFC2x3
Object Type
VBL-156 - IFC2x3
VBL-157 - IFC2x3
VBL-159 - IFC2x3
Generic Assignments
VBL-183 - IFC2x3
VBL-202 - IFC2x3
VBL-203 - IFC2x3
VBL-204 - IFC2x3
VBL-218 - IFC2x3
Shape Representation
Topological Representation
VBL-211 - IFC2x3
Applied Load
Planar Force
VBL-212 - IFC2x3
Temperature Load
This document uses the official IFC Model View Definition Format version 1.1. of the IAI (www.iai-international.org) The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-165
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingSystem >
+ RelatedBuildings >
ServicesBuildings (INV)
ServicedBySystems (INV)
Implementation agreements
IfcRelServicesBuildings
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingSystem
Must be one IfcStructuralAnalysisModel.
Must be one IfcBuildingStorey. NOTE: Each IfcBuildingStorey may have several
RelatedBuildings
IfcStructuralAnalysisModel assigned to it.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
GUID
Reference
VBL-170
Relationships
History
Created 23.10.2006
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
STRING (22)
Implementation agreements
Definition from IAI: Holds an identifier that is unique throughout the software world. This is also known
as a Globally Unique Identifier (GUID) or Universal Unique Identifier (UUID) by the Open Group. The
identifier is generated using an algorithm published by the Object Management Group. The algorithm is
explained at the open group website. The Microsoft Foundation Class (MFC) function "CoCreateGuid",
which is an implementation of the above algorithm, has been used by many IFC implementers to create
an identifier.
An identifier is a unique 128-bit number. Using 64 characters for the base the resulting compressed
string needs 22 characters. For more information see the IFCs online documentation.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Name
Reference
VBL-171
Relationships
History
Created 23.10.2006
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Loaded by
Reference
VBL-174
Relationships
History
Created 23.10.2006,
improved 27.9.2007,
definition of the hierarchy improved 11.11.2007,
original (version 3) Loaded by concept has been moved to VBL-445
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
Different kind of load hierarchies may be exchanged by IFC. LoadedBy has references to all of the hierarchies of a
structural analysis model. For more information see the leaf concepts.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Has Result
Reference
VBL-175
Relationships
History
Created 4.2.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Version
Status
Proposal
Implementation agreements
IfcStructuralAnalysisModel
Attribute
Implementation agreements
GlobalId
<Open>
OwnerHistory
<Open>
Name
<Open>
Description
<Open>
ObjectType
<Open>
PredefinedType
<Open>
OrientationOf2DPlane <Open>
LoadedBy
<Open>
HasResults
Must be list of IfcStructuralResultGroups.
IfcStructuralResultGroup
Attribute
Implementation agreements
GlobalId
<Open>
OwnerHistory
<Open>
Name
<Open>
Description
<Open>
ObjectType
<Open>
TheoryType
<Open>
Reference to one IfcStructuralLoadGroup, which has LOAD_CASE for
ResultForLoadGroup
PredefinedType.
IsLinear
<Open>
IfcRelAssignsToGroup
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
RelatedObjectsType
RelatingGroup
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
<Open>
<Open>
Must be list of IfcStructuralPointReactions.
<Open>
Must be IfcStructuralResultGroup.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-181
Version
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralCurveMember attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-182
Relationships
History
Created 23.10.2006
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
ObjectPlacement >
Representation >
+ PredefinedType
RIGID_JOINED_MEMBER
PIN_JOINED_MEMBER
CABLE
TENSION_MEMBER
COMPRESSION_MEMBER
USERDEFINED
NOTDEFINED
Implementation agreements
PredefinedType:
o
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be cerified by the IAI before becoming part of an official IFC Model View Definition.
VBL-183
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingElement >
+ RelatedStructuralActivity >
AssignedToStructuralActivity (INV)
AssignedToStructuralItem (INV)
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
N/A
RelatedStructuralActivity N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Applied Load
Reference
VBL-185
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcStructuralLinearAction
Attribute
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
Reserved.
ObjectType
Reserved.
ObjectPlacement N/A
Representation
N/A
AppliedLoad
N/A
GlobalOrLocal
N/A
DestabilizingLoad N/A
CausedBy
N/A
ProjectedOrTrue
N/A
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-197
Version
Status
Proposal
Relationships
History
Created 23.10.2006
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelConnectsStructuralMember
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingStructuralMember
N/A
RelatedStructuralConnection N/A
AppliedCondition
N/A
AdditionalConditions
N/A
SupportedLength
N/A
ConditionCoordinateSystem N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-198
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
<Variable Concept>
VBL-198 - IFC2x3
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingElement >
+ RelatedStructuralMember >
HasStructuralMember (INV)
ReferencesElement (INV)
Implementation agreements
IfcRelConnectsStructuralElement
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
N/A
RelatedStructuralMember N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-199
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects
N/A
RelatingProfileProperties N/A
ProfileSectionLocation
N/A
ProfileOrientation
N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-200
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
<Variable Concept>
VBL-258 - IFC2x3
VBL-200 - IFC2x3
Generic Associations
Instantiation diagram
Implementation agreements
IfcRelAssociatesMaterial
Attribute
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to
GlobalId
change.
Providing an OwnerHistory is mandatory, but it is allowed to use
OwnerHistory
dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects N/A
RelatingMaterial N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-201
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-202
Relationships
History
Created 23.10.2006,
improved 28.9.2007,
Name changed, PlacementRelTo added 11.11.2007
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcLocalPlacement
Attribute
RelativePlacement
Implementation agreements
The object placement of every structural object in the same structural analysis model
must point to the same IfcLocalPlacement. This can be the IfcLocalPlacement of the
IfcBuilding or IfcBuildingStorey.
N/A
IfcAxis2Placement3D
Attribute
Location
Dim
Axis
RefDirection
P
Implementation agreements
Giving Location is mandatory. However usually (0,0,0) coordinates are used.
N/A
N/A
N/A
N/A
PlacementRelTo
IfcDirection
Attribute
DirectionRatios
Dim
Implementation agreements
Must be in three dimensions.
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-203
Version
Status
Draft
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-204
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Name
N/A
Description
N/A
Representations
Must be one IfcTopologyRepresentation.
IfcTopologyRepresentation
Attribute
ContextOfItems
N/A
RepresentationIdentifier N/A
RepresentationType
Must be Edge
Items
N/A
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-205
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Name
Description
+ Representations >
ShapeOfProduct (INV)
+ ContextOfItems >
RepresentationIdentifier
RepresentationType
+ Items >
OfProductRepresentation (INV)
+ EdgeStart >
+ EdgeEnd >
+ VertexGeometry >
+ Coordinates
+ VertexGeometry >
+ Coordinates
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Name
Reserved
Description
Reserved
Representations
Must be one IfcTopologyRepresentation
IfcTopologyRepresentation
Attribute
ContextOfItems
N/A
RepresentationIdentifier Not used
RepresentationType
Must be Edge
Items
Must be one IfcEdge
IfcVertexPoint
Attribute
VertexGeometry
IfcCartesianPoint
Implementation agreements
Implementation agreements
Must be IfcCartesianPoint
Proposal
Attribute
Coordinates
Implementation agreements
Must be three dimensions
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-206
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Name
Description
+ Representations >
ShapeOfProduct (INV)
+ ContextOfItems >
RepresentationIdentifier
RepresentationType
+ Items >
OfProductRepresentation (INV)
+ EdgeStart >
+ EdgeEnd >
+ EdgeGeometry >
+ SameSense
+ VertexGeometry >
+ Coordinates
+ VertexGeometry >
+ Coordinates
+ Position >
+ Radius
+ Location >
+ Coordinates
+ DirectionRatios
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Name
Not used.
Description
Not used.
Representations
Must be one IfcTopologyRepresentation
IfcTopologyRepresentation
Attribute
ContextOfItems
N/A
RepresentationIdentifier Not used.
RepresentationType
Must be Edge
Items
Must be IfcEdgeCurve.
IfcEdgeCurve
Attribute
EdgeStart
EdgeEnd
EdgeGeometry
Implementation agreements
Implementation agreements
N/A
N/A
Must be IfcCircle.
Proposal
SameSense
N/A
IfcVertexPoint
Attribute
VertexGeometry
Must be IfcCartesianPoint
IfcCartesianPoint
Attribute
Coordinates
Dim
Implementation agreements
Implementation agreements
IfcCircle
Attribute
Dim
Position
Radius
Implementation agreements
N/A
Must be IfcAxis2Placement3D
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-207
Version
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralSurfaceMember attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Surface Type
Reference
VBL-208
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Thickness
Reference
VBL-209
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
ObjectPlacement >
Representation >
+ PredefinedType
Thickness
REAL
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Planar Force
Reference
VBL-211
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
ObjectPlacement >
Representation >
+ AppliedLoad >
+ GlobalOrLocal
+ DestablizingLoad
+ ProjectedOrTrue
CausedBy >
Name
PlanarForceX
PlanarForceY
PlanarForceZ
Implementation agreements
IfcStructuralPlanarAction
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
Reserved.
Description
Reserved.
ObjectType
N/A
ObjectPlacement N/A
Representation
N/A
AppliedLoad
Must be IfcStructuralLoadPlanarForce
GlobalOrLocal
N/A
DestabilizingLoad N/A
CausedBy
N/A
ProjectedOrTrue
N/A
Additional information
P21 example
Status
Proposal
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-212
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Implementation agreements
IfcStructuralPlanarActionVarying
Attribute
GlobalId
OwnerHistory
Name
Description
ObjectType
ObjectPlacement
Representation
AppliedLoad
GlobalOrLocal
DestabilizingLoad
CausedBy
ProjectedOrTrue
VaryingAppliedLoadLocation
SubsequentAppliedLoads
Implementation agreements
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Must be IfcStructuralLoadPlanarForce.
N/A
N/A
N/A
N/A
N/A
Must be IfcStructuralLoadPlanarForce.
Proposal
VaryingAppliedLoads
N/A
IfcShapeAspect
Attribute
ShapeRepresentations
Name
Description
ProductDefinitional
PartOfProductDefinitionShape
Implementation agreements
Must be IfcShapeRepresentation
Not used.
Not used.
Not used.
Not used.
IfcShapeRepresentation
Attribute
ContextOfItems
RepresentationIdentifier
RepresentationType
Items
Implementation agreements
N/A
Not used.
Not used.
Must be one IfcCartesianPoint
IfcCartesianPoint
Attribute
Coordinates
Dim
Implementation agreements
Must have three dimensions.
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-218
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Name
Reserved.
Description
Reserved.
Representations
Must be one IfcTopologyRepresentation.
IfcTopologyRepresentation
Attribute
Implementation agreements
ContextOfItems
N/A
RepresentationIdentifier Not used.
RepresentationType
Must be Face
Items
Must be one IfcFaceSurface.
IfcFaceSurface
Proposal
Attribute
Bounds
FaceSurface
SameSense
Implementation agreements
Must be one IfcFaceOuterBound. Optionally also IfcFaceBounds as inner boundaries
of the face.
Must be IfcPlane.
N/A
IfcFaceBound
Attribute
Bound
Orientation
Must be IfcPolyLoop.
N/A
IfcAxis2Placement3D
Attribute
Location
Dim
Axis
RefDirection
P
N/A
N/A
N/A
Not used.
N/A
Implementation agreements
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-219
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Name
Description
+ Representations >
ShapeOfProduct (INV)
+ ContextOfItems >
RepresentationIdentifier
RepresentationType
+ Items >
OfProductRepresentation (INV)
+ Bounds >
+ FaceSurface >
+ SameSense
Bound>>
++Bound
+ Bound
>
Orientation
++Orientation
+ Orientation
+ Position >
+ Location >
Axis >
RefDirection >
+ Coordinates
+ DirectionRatios
+ EdgeList >
+ EdgeElement >
+ Orientation >
+ EdgeStart >
+ EdgeEnd >
+ VertexGeometry >
+ Coordinates
+ VertexGeometry >
+ Coordinates
+ EdgeStart >
+ EdgeEnd >
+ EdgeGeometry >
+ SameSense
+ VertexGeometry >
+ Coordinates
+ VertexGeometry >
+ Coordinates
+ Position >
+ Radius
+ Location >
RefDirection >
+ Coordinates
+ DirectionRatios
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Proposal
Name
Description
Representations
Reserved.
Reserved.
Must be one IfcTopologyRepresentation.
IfcTopologyRepresentation
Attribute
Implementation agreements
ContextOfItems
N/A
RepresentationIdentifier Not used.
RepresentationType
Must be Face.
Items
Must be one IfcFaceSurface.
IfcFaceSurface
Attribute
Bounds
FaceSurface
SameSense
N/A
Must be IfcPlane.
N/A
IfcFaceBound
Attribute
Bound
Orientation
Must be IfcEdgeLoop.
N/A
IfcOrientedEdge
Attribute
EdgeStart
EdgeEnd
EdgeElement
Orientation
.EdgeStart
.EdgeEnd
Implementation agreements
N/A
N/A
Must be either IfcEdge or ifcEdgeCurve.
N/A
N/A
N/A
Implementation agreements
Implementation agreements
IfcVertexPoint
Attribute
VertexGeometry
Must be IfcCartesianPoint.
IfcEdgeCurve
Attribute
EdgeStart
EdgeEnd
EdgeGeometry
SameSense
N/A
N/A
Must be IfcCircle.
N/A
Implementation agreements
Implementation agreements
OuterBoundary
2.
1.
3.
2.
3.
1.
4.
4.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-220
Relationships
History
Created 23.10.2006,
improved 28.9.2007,
Condition coordinate system added 17.1.2008
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
General
In the IfcBoundaryCondition value (-1.) represents an infinitive large value or a fixed connectivity with
infinitive stiffness, value zero (0.) represents no stiffness or a free connectivity, value NIL ($) represents an
unknown connectivity condition, any other value represents a finitive stiffness or spring connectivity in that
direction or rotation.
Usage in view definition diagram
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingStructuralMember >
+ RelatedStructuralConnection >
AppliedCondition >
AdditionalConditions >
SupportedLength
ConditionCoordinateSystem >
ConnectedBy (INV)
ConnectsStructuralMembers (INV)
Name
LinearStiffnessX
LinearStiffnessY
LinearStiffnessZ
RotationalStiffnessX
RotationalStiffnessY
RotationalStiffnessZ
+ Coordinates
+ DirectionRatios
+ DirectionRatios
Implementation agreements
IfcRelConnectsStructuralMember
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy
OwnerHistory
data.
Name
Reserved.
Description
Reserved.
RelatingStructuralMember
N/A
RelatedStructuralConnection Must be IfcStructuralPointConnection
AppliedCondition
Must be IfcBoundaryNodeCondition.
AdditionalConditions
Not used.
SupportedLength
Not used.
The applied conditions are defined in this given coordinate system.
ConditionCoordinateSystem
Coordination system is defined relative to global coordinate system.
IfcAxis2Placement3D
Attribute
Location
Axis
RefDirection
Implementation agreements
Giving location is mandatory, but while in this case it doesnt have any
special meaning (0,0,0) is used.
N/A
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-221
Relationships
History
Created 23.10.2006
Improved 28.9.2007
PointOnRelatedElement has been changed to Not used,
Condition coordination system added 17.1.2008
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
General
In the IfcBoundaryCondition value (-1.) represents an infinitive large value or a fixed connectivity with
infinitive stiffness, value zero (0.) represents no stiffness or a free connectivity, value NIL ($) represents an
unknown connectivity condition, any other value represents a finitive stiffness or spring connectivity in that
direction or rotation.
Usage in view definition diagram
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingStructuralMember >
+ RelatedStructuralConnection >
AppliedCondition >
AdditionalConditions >
SupportedLength
ConditionCoordinateSystem >
+ ConnectionConstrains >
ConnectedBy (INV)
ConnectsStructuralMembers (INV)
Name
LinearStiffnessX
LinearStiffnessY
LinearStiffnessZ
RotationalStiffnessX
RotationalStiffnessY
RotationalStiffnessZ
+ Coordinates
+ DirectionRatios
+ DirectionRatios
+ VertexGeometry >
+ Coordinates
Implementation agreements
IfcRelConnectsWithEccentricity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingStructuralMember
N/A
RelatedStructuralConnection Must be IfcStructuralPointConnection.
AppliedCondition
Must be IfcBoundaryNodeCondition.
AdditionalConditions
Not used.
SupportedLength
Not used.
ConditionCoordinateSystem Not used.
ConnectionConstraint
Must be IfcConnectionPointGeometry.
IfcConnectionPointGeometry
Attribute
PointOnRelatingElement
PointOnRelatedElement
IfcAxis2Placement3D
Attribute
Location
Axis
RefDirection
IfcVertexPoint
Attribute
VertexGeometry
Implementation agreements
Must be IfcVertexPoint.
Not used.
Implementation agreements
Giving location is mandatory, but while in this case it doesnt have any
special meaning (0,0,0) is used.
N/A
N/A
Implementation agreements
Must be IfcCartesianPoint. If the eccentricity point is the end node of the
member, then the instance of the IfcVertexPoint, which is used by the member
must be used.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-222
Relationships
History
Created 23.10.2006,
improved 28.9.2007,
Condition coordinate system added 17.1.2008
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
General
In the IfcBoundaryCondition value (-1.) represents an infinitive large value or a fixed connectivity with
infinitive stiffness, value zero (0.) represents no stiffness or a free connectivity, value NIL ($) represents an
unknown connectivity condition, any other value represents a finitive stiffness or spring connectivity in that
direction or rotation.
Usage in view definition diagram
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingStructuralMember >
+ RelatedStructuralConnection >
AppliedCondition >
AdditionalConditions >
SupportedLength
ConditionCoordinateSystem >
ConnectedBy (INV)
ConnectsStructuralMembers (INV)
Name
LinearStiffnessByLengthX >
LinearStiffnessByLengthY >
LinearStiffnessByLengthZ >
RotationalStiffnessByLengthX >
RotationalStiffnessByLengthY >
RotationalStiffnessByLengthZ >
+ Coordinates
+ DirectionRatios
+ DirectionRatios
Implementation agreements
IfcRelConnectsStructuralMember
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingStructuralMember
N/A
RelatedStructuralConnection Must be IfcStructuralCurveConnection
AppliedCondition
Must be IfcBoundaryEdgeCondition.
AdditionalConditions
Not used.
Only given if the support has actual width. Otherwise $ is used. Given in the
SupportedLength
units defined in the IfcProjects UnitsInContext.
ConditionCoordinateSystem Not used.
IfcAxis2Placement3D
Attribute
Location
Axis
RefDirection
Implementation agreements
Giving location is mandatory, but while in this case it doesnt have any special
meaning (0,0,0) is used.
N/A
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-223
Relationships
History
Created 23.10.2006,
Documentation improved 28.9.2007,
Condition coordinate system added 17.1.2008
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
General
In the IfcBoundaryCondition value (-1.) represents an infinitive large value or a fixed connectivity with
infinitive stiffness, value zero (0.) represents no stiffness or a free connectivity, value NIL ($) represents an
unknown connectivity condition, any other value represents a finitive stiffness or spring connectivity in that
direction or rotation.
Usage in view definition diagram
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingStructuralMember >
+ RelatedStructuralConnection >
AppliedCondition >
AdditionalConditions >
SupportedLength
ConditionCoordinateSystem >
+ ConnectionConstrains >
ConnectedBy (INV)
ConnectsStructuralMembers (INV)
Name
LinearStiffnessByLengthX >
LinearStiffnessByLengthY >
LinearStiffnessByLengthZ >
RotationalStiffnessByLengthX >
RotationalStiffnessByLengthY >
RotationalStiffnessByLengthZ >
+ Coordinates
+ DirectionRatios
+ DirectionRatios
+ CurveOnRelatingElement >
CurveOnRelatedElement >
+ Points >
Coordinates
++Coordinates
Implementation agreements
IfcRelConnectsWithEccentricity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingStructuralMember
N/A
RelatedStructuralConnection Must be IfcStructuralCurveConnection.
AppliedCondition
Must be IfcBoundaryEdgeCondition.
AdditionalConditions
Not used.
Only given if the support has actual width. Otherwise $ is used. Given in the
SupportedLength
units defined in the IfcProjects UnitsInContext.
ConditionCoordinateSystem Not used.
ConnectionConstraint
Must be IfcConnectionCurveGeometry.
IfcAxis2Placement3D
Attribute
Location
Axis
RefDirection
Implementation agreements
Giving location is mandatory, but while in this case it doesnt have any
special meaning (0,0,0) is used.
N/A
N/A
IfcConnectionCurveGeometry
Attribute
CurveOnRelatingElement
CurveOnRelatedElement
Must be IfcPolyline.
Not used.
IfcCartesianPoint
Attribute
Coordinates
Dim
Implementation agreements
Must have three dimensions.
N/A
Implementation agreements
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-231
Version
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralPointConnection attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-232
Version
Status
Proposal
Relationships
History
Created 23.10.2006
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
ObjectPlacement >
Representation >
AppliedCondition >
Implementation agreements
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-233
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcStructuralPointConnection
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
N/A
ObjectType
N/A
ObjectPlacement N/A
Representation
N/A
Must be IfcBoundaryNodeCondition. Used for defining the conditions of node
AppliedCondition supports. The connection conditions are defined in relation entities of the
connections.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-234
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Instantiation diagram
Implementation agreements
IfcProductDefinitionShape
Attribute
Implementation agreements
Name
Reserved.
Description
Reserved.
Representations
Must be one IfcTopologyRepresentation.
IfcTopologyRepresentation
Attribute
Implementation agreements
ContextOfItems
N/A
RepresentationIdentifier Not used.
RepresentationType
Must be Vertex
Items
Must be one IfcVertexPoint
IfcCartesianPoint
Attribute
Coordinates
Implementation agreements
Must be three dimensions.
Status
Proposal
Dim
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-235
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcStructuralCurveConnection
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
N/A
ObjectType
N/A
ObjectPlacement N/A
Representation
N/A
Must be IfcBoundaryEdgeCondition. Used for defining the conditions of edge
AppliedCondition supports. The connection conditions are defined in relation entities of the
connections.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-236
Version
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralCurveConnection attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Generic Associations
VBL-258
Reference
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssociates
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Reserved.
Reserved.
N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Material Name
Reference
VBL-265
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcRelAssociatesMaterial
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects N/A
RelatingMaterial Must be IfcMaterial.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Generic Assignments
Reference
VBL-268
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssigns
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
RelatedObjectsType
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Reserved.
Reserved.
N/A
N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-329
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
N/A
RelatedStructuralActivity Must be IfcStructuralPointAction.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-331
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
N/A
RelatedStructuralActivity Must be IfcStructuralLinearAction.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Single Force
Reference
VBL-332
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
ObjectType
ObjectPlacement >
Representation >
+ AppliedLoad >
+ GlobalOrLocal
+ DestablizingLoad
+ ProjectedOrTrue
CausedBy >
Name
ForceX
ForceY
ForceZ
MomentX
MomentY
MomentZ
Implementation agreements
IfcStructuralPointAction
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
N/A
ObjectType
N/A
ObjectPlacement N/A
Representation
N/A
AppliedLoad
Must be IfcStructuralLoadSingleForce.
GlobalOrLocal
N/A
DestabilizingLoad N/A
CausedBy
N/A
Additional information
Status
Proposal
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Linear Force
Reference
VBL-335
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Instantiation diagram
Implementation agreements
IfcStructuralLinearAction
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
N/A
ObjectType
N/A
ObjectPlacement N/A
Representation
N/A
AppliedLoad
Must be IfcStructuralLoadLinearForce.
GlobalOrLocal
N/A
DestabilizingLoad N/A
CausedBy
N/A
ProjectedOrTrue
N/A
Additional information
Status
Proposal
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-336
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
N/A
RelatedStructuralActivity Must be IfcStructuralPlanarAction.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-337
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects
N/A
RelatingProfileProperties
Must be IfcGeneralProfileProperties.
ProfileSectionLocation
Not used.
For IfcStructuralCurveMember it is a rotation about the longitudinal axis of the
underlying curve, the x axis is determined by a line from the start vertex to the end
ProfileOrientation
vertex.
If the longitudinal axis is not parallel to the structural z axis of the structural
coordinate system of the analysis model, i.e. the curve member is a beam (or nonvertical member), the ProfileOrientation defaults to [0.,0.,1.] (if the z axis is not
orthogonal to the x axis, an adjustment is made to maintain orthogonality). The
angle is then measured from the structural z axis to determine the location of the
structural z axis of the profile.
If the longitudinal axis is parallel to the structural z axis of the structural coordinate
system of the analysis model, i.e. the curve member is a column, the
ProfileOrientation defaults to [1.,0.,0.]. The angle is then measured from the
structural x axis to determine the location of the structural z axis of the profile.
If the ProfileOrientation attribute is given as an IfcDirection, it would default to:
For 'beams' as [0., sin, cos ]
For 'columns' as [cos, -sin, 0.]
IfcGeneralProfileProperties
Attribute
ProfileName
ProfileDefinition
PhysicalWeight
Perimeter
MinimumPlateThickness
MaximumPlateThickness
CrossSectionArea
Implementation agreements
The profile name associated to the structural member is entered here.
Must be IfcArbitraryClosedProfileDef.
Not used.
Not used.
Not used.
Not used.
Not used.
IfcArbitraryClosedProfileDef
Attribute
ProfileType
Must be AREA.
ProfileName
Not used.
OuterCurve
Must be IfcPolyline.
Implementation agreements
IfcPolyline
Attribute
Dim
Points
Implementation agreements
N/A
The polyline must be closed. The given first and the last point must be the same.
Coordinated must have three dimensions.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-338
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
RelatedObjects
RelatingProfileProperties
ProfileSectionLocation
ProfileOrientation
Reserved.
N/A
Must be IfcGeneralProfileProperties.
Not used.
Not used.
IfcGeneralProfileProperties
Attribute
ProfileName
ProfileDefinition
PhysicalWeight
Perimeter
MinimumPlateThickness
MaximumPlateThickness
CrossSectionArea
Implementation agreements
The profile name associated to the structural member is entered here.
Must be IfcArbitraryClosedProfileDef.
Not used.
Not used.
Not used.
Not used.
Not used.
IfcArbitraryClosedProfileDef
Attribute
Implementation agreements
ProfileType
Must be AREA.
ProfileName
Not used.
OuterCurve
Must be Ifc2DCompositeCurve.
Ifc2DCompositeCurve
Attribute
Dim
Segments
SelfIntersect
NSegments
ClosedCurve
IfcCompositeCurveSegment
Attribute
Transition
SameSense
ParentCurve
Dim
IfcTrimmedCurve
Attribute
Dim
BasisCurve
Trim1
Trim2
SenseAgreement
MasterRepresentation
Implementation agreements
N/A
N/A
Not used.
N/A
N/A
Implementation agreements
Must be CONTINUOUS.
N/A
Must be IfcPolyline or/and IfcTrimmedCurve.
N/A
Implementation agreements
N/A
Must be IfcCircle.
Must be IfcCartesianPoint.
Must be IfcCartesianPoint.
N/A
N/A
IfcCircle
Attribute
Implementation agreements
Dim
Position
Radius
N/A
Must be IfcAxis2Placement2D
N/A
IfcCartesianPoint
Attribute
Coordinates
Dim
Implementation agreements
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-339
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects
N/A
RelatingProfileProperties
Must be IfcGeneralProfileProperties.
ProfileSectionLocation
Not used.
ProfileOrientation
Not used.
IfcGeneralProfileProperties
Attribute
ProfileName
ProfileDefinition
PhysicalWeight
Perimeter
MinimumPlateThickness
MaximumPlateThickness
CrossSectionArea
Implementation agreements
The profile name associated to the structural member is entered here.
Not used. The profile library values of the profile of the importing application will be
used. The profile is recognized by its profile name.
Not used.
Not used.
Not used.
Not used.
Not used.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-340
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Instantiation diagram
Implementation agreements
IfcStructuralLinearActionVarying
Attribute
GlobalId
OwnerHistory
Name
Description
ObjectType
ObjectPlacement
Representation
AppliedLoad
GlobalOrLocal
DestabilizingLoad
CausedBy
ProjectedOrTrue
Implementation agreements
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Must be IfcStructuralLoadLinearForce.
N/A
N/A
N/A
N/A
Proposal
VaryingAppliedLoadLocation
SubsequentAppliedLoads
VaryingAppliedLoads
N/A
Must be IfcStructuralLoadLinearForce.
N/A
IfcShapeAspect
Attribute
ShapeRepresentations
Name
Description
ProductDefinitional
PartOfProductDefinitionShape
Implementation agreements
Must be IfcShapeRepresentation
Not used.
Not used.
Not used.
Not used.
IfcShapeRepresentation
Attribute
ContextOfItems
RepresentationIdentifier
RepresentationType
Items
Implementation agreements
N/A
Not used.
Not used.
Must be one IfcPointOnCurve.
IfcPointOnCurve
Attribute
BasisCurve
PointParameter
Dim
Implementation agreements
Reference to the IfcCurve defined in the topological representation of the
action.
N/A
N/A
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-342
Version
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralPointAction attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-343
Version
1.0
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralLinearAction attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-445
Relationships
History
Created 23.10.2006,
improved 27.9.2007,
definition of the hierarchy improved 11.11.2007,
Old Loaded by concept is now this one 17.1.2008
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
IfcStructuralAnalysisModel
Attribute
Implementation agreements
GlobalId
N/A
OwnerHistory
N/A
Name
N/A
Description
N/A
ObjectType
N/A
PredefinedType
N/A
OrientationOf2DPlane N/A
LoadedBy. Must be list of IfcStructuralLoadGroups, which have
LoadedBy
LOAD_COMBINATION for PredefinedType
HasResults
N/A
IfcStructuralLoadGroup
Attribute
GlobalId
OwnerHistory
Name
Description
ObjectType
PredefinedType
ActionType
ActionSource
Coefficient
Purpose
IfcRelAssignsToGroup
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
RelatedObjectsType
RelatingGroup
Implementation agreements
N/A
N/A
N/A
N/A
N/A
Different values must be used in the different levels of the hierarchy. See
the instantiation diagram above.
Different values must be used in the different levels of the hierarchy. See
the instantiation diagram above.
Different values must be used in the different levels of the hierarchy. See
the instantiation diagram above.
N/A
For load combination the allowed values are: ULS, SLS, ALS. ULS
is for Ultimate Loading System. SLS is for Service Loading System.
ALS is for Accident Loading System. This only used for
IfcStructuralLoadGroup, which has LOAD_COMBINATION for
PredefinedType.
Implementation agreements
N/A
N/A
N/A
N/A
For instances which are related to IfcStructuralLoadGroups having
LOAD_COMBINATION for PredefinedType, these must be
IfcStructuralLoadGroups having LOAD_COMBINATION_GROUP as
PredefinedType.
For instances which are related to IfcStructuralLoadGroups having
LOAD_COMBINATION_GROUP for PredefinedType, these must be
IfcStructuralLoadGroups having LOAD_CASE as PredefinedType.
For instances which are related to IfcStructuralLoadGroups having
LOAD_CASE for PredefinedType, these must be IfcStructuralActions.
N/A
N/A
Note that the whole hierarchy must always be implemented, when supporting this concept. If the exchanged load
combination doesnt need all the levels of the hierarchy, then dummy levels has to be modeled.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-446
Version
Status
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Proposal
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects
N/A
RelatingProfileProperties
Must be IfcGeneralProfileProperties.
ProfileSectionLocation
Not used.
ProfileOrientation
Must be IfcDirection.
IfcStructuralProfileProperties
Attribute
ProfileName
ProfileDefinition
PhysicalWeight
Perimeter
MinimumPlateThickness
MaximumPlateThickness
CrossSectionArea
TorsionalConstantX
MomentOfInertiaYZ
MomentOfInertiaY
MomentOfInertiaZ
WarpingConstant
ShearCentreZ
ShearCentreY
ShearDeformationAreaZ
ShearDeformationAreaY
MaximumSectionModulusY
MinimumSectionModulusY
MaximumSectionModulusZ
MinimumSectionModulusZ
TorsionalSectionModulus
CentreOfGravityInX
CentreOfGravityInY
Implementation agreements
The profile name associated to the structural member is entered here.
Not used. The profile library of the importing application will be used. The profile
is recognized and mapped to the library by its name.
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
<Open>
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-447
Version
Status
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Proposal
Implementation agreements
IfcRelAssociatesProfileProperties
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatedObjects
N/A
RelatingProfileProperties
Must be IfcGeneralProfileProperties.
ProfileSectionLocation
Not used.
ProfileOrientation
Must be IfcDirection.
IfcStructuralSteelProfileProperties
Attribute
Implementation agreements
ProfileName
The profile name associated to the structural member is entered here.
Not used. The profile library of the importing application will be used. The profile
ProfileDefinition
is recognized and mapped to the library by its name.
PhysicalWeight
<Open>
Perimeter
<Open>
MinimumPlateThickness
<Open>
MaximumPlateThickness
<Open>
CrossSectionArea
<Open>
TorsionalConstantX
<Open>
MomentOfInertiaYZ
<Open>
MomentOfInertiaY
<Open>
MomentOfInertiaZ
<Open>
WarpingConstant
<Open>
ShearCentreZ
<Open>
ShearCentreY
<Open>
ShearDeformationAreaZ
<Open>
ShearDeformationAreaY
<Open>
MaximumSectionModulusY
<Open>
MinimumSectionModulusY
<Open>
MaximumSectionModulusZ
<Open>
MinimumSectionModulusZ
<Open>
TorsionalSectionModulus
<Open>
CentreOfGravityInX
<Open>
CentreOfGravityInY
<Open>
ShearAreaZ
<Open>
ShearAreaY
<Open>
PlasticShapeFactorY
<Open>
PlasticShapeFactorZ
<Open>
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-448
Version
Status
Proposal
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
I
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-449
Version
Status
Proposal
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
I
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-450
Version
Status
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Proposal
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
Must be some of the IfcStructuralItems subtypes.
RelatedStructuralActivity Must be IfcStructuralPointReaction.
IfcStructuralPointReaction
Attribute
Implementation agreements
GlobalId
<Open>
OwnerHistory
<Open>
MIN if minimum values are presented.
MAX if maximum values are presented.
END if values for end or start points of the member are presented.
Name
INT if values for intermediate points of the member are presented.
Description
ObjectType
ObjectPlacement
Representation
AppliedLoad
GlobalOrLocal
IfcLocalPlacement
Attribute
PlacementRelTo
RelativePlacement
Note that for MIN and MAX the different forces and moments are usually in the
different points, so different instances of IfcReaction for them has to be created.
<Open>
<Open>
Must be IfcLocalPlacement. The point for the internal forces is presented in the
local coordinate system of the StructuralItem. The point must be on the axis of the
relative curve member or within the surface of the relative surface member.
<Open>
Must be IfcStructuralLoadSingleForceWarping. Note that not all the values must
not be presented for all the instances.
<Open>
Implementation agreements
References to the IfcLocalPlacement of the relative Structural Item.
The point where the internal forces affect are given in the local coordinate system
of the relative structural item.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-451
Version
Status
Relationships
History
Created 31.1.2008
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Proposal
Implementation agreements
IfcRelConnectsStructuralActivity
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingElement
Must be some of the IfcStructuralItems subtypes.
RelatedStructuralActivity Must be IfcStructuralPointReaction.
IfcStructuralPointReaction
Attribute
Implementation agreements
GlobalId
<Open>
OwnerHistory
<Open>
MIN if minimum values are presented.
MAX if maximum values are presented.
END if values for end or start points of the member are presented.
Name
INT if values for intermediate points of the member are presented.
Description
ObjectType
ObjectPlacement
Representation
AppliedLoad
GlobalOrLocal
IfcLocalPlacement
Attribute
PlacementRelTo
RelativePlacement
Note that for MIN and MAX the different forces and moments are usually in the
different points, so different instances of IfcReaction for them has to be created.
<Open>
<Open>
Must be IfcLocalPlacement. The point for the internal forces is presented in the
local coordinate system of the StructuralItem. The point must be on the axis of the
relative curve member or within the surface of the relative surface member.
<Open>
Must be IfcStructuralLoadSingleDisplacementDistortion. Note that not all the
values must be presented for all the instances.
<Open>
Implementation agreements
References to the IfcLocalPlacement of the relative Structural Item.
The point where the displacement takes place is given in the local coordinate
system of the relative structural item.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-154
Version
1.0
Status
Proposal
Relationships
History
Created 25.3.2007
Authors
Sakari Lehtinen
Document Owner
General
The concept groups the IfcStructuralAnalysisModel attributes defined inside the entity.
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-155
Relationships
History
Created 5.10.2006
Authors
Sakari Lehtinen
Document Owner
Version
1.0
Status
Proposal
Instantiation diagram
Implementation agreements
This type definition is used to distinguish between different types of structural analysis models. The analysis
models are differentiated by their dimensionality.
-
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Group Assignment
Reference
VBL-157
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatedObjects >
RelatedObjectsType
+ RelatingGroup >
HasAssignments (INV)
HasAssignments (INV)
Implementation agreements
IfcRelAssignsToGroup
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
RelatedObjectsType
RelatingGroup
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Reserved.
Reserved.
N/A
N/A
N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-159
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
Implementation agreements
Structural Analysis Model Group Assignment lists all the structural items used in the specific instance of an
analysis model.
IfcRelAssignsToGroup
Attribute
GlobalId
OwnerHistory
Name
Description
RelatedObjects
RelatedObjectsType
RelatingGroup
Implementation agreements
Providing a GUID is mandatory, but the GUID is allowed to change.
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Reserved.
Reserved.
List of all the IfcStructuralItems assigned to the IfcStructuralAnalysisModel. Objects in
the list may be any subtype of IfcStructuralItem.
Not used.
Must be one IfcStructuralAnalysisModel.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
Services Buildings
Reference
VBL-163
Version
Status
Proposal
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Instantiation diagram
Implementation agreements
IfcRelServicesBuildings
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingSystem
N/A
RelatedBuildings N/A
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.
VBL-164
Relationships
History
Authors
Sakari Lehtinen
Document Owner
Version
Status
Proposal
Instantiation diagram
+ GlobalId
+ OwnerHistory >
Name
Description
+ RelatingSystem >
+ RelatedBuildings >
ServicesBuildings (INV)
ServicedBySystems (INV)
Implementation agreements
IfcRelServicesBuildings
Attribute
Implementation agreements
GlobalId
Providing a GUID is mandatory, but the GUID is allowed to change.
OwnerHistory
Providing an OwnerHistory is mandatory, but it is allowed to use dummy data.
Name
Reserved.
Description
Reserved.
RelatingSystem
Must be one IfcStructuralAnalysisModel.
Must be one IfcBuilding. NOTE: Each IfcBuilding may have several
RelatedBuildings
IfcStructuralAnalysisModel assigned to it.
Additional information
P21 example
This document uses the official IFC Model View Definition Format version 1.1.0. of the IAI (www.iai-international.org)
The content of this document has to be certified by the IAI before becoming part of an official IFC Model View Definition.