Professional Documents
Culture Documents
XS Service Manual Updated Pages PDF
XS Service Manual Updated Pages PDF
XS Service Manual Updated Pages PDF
SECTION 3
ELECTRONICS
XS series S/M
June 5, 2008
3-10
June 5, 2008
XS series S/M
3-11
June 5, 2008
4.3.4
(7) When the analysis is over select Sensitivity and confirm that
values are within the following range.
Adjusting Sensitivity
Target range
DIFF-X: assay value +/- 3ch
DIFF-Y: assay value +/- 2ch
FSC-X: assay value +/- 2ch
MCV: assay value +/- 1 fL
MPV: assay value +/- 1fL
HGB: assay value +/- 0.2 g/dL
Make sure that the DIFF scattergram and FSC histogram are
discrete and displayed normally.
Click >>>
(8) Click Close when the values are within the range.
(9) Repeat step (6) and (7) until the values are within the range.
For adjusting DIFF-Y using human blood, aspirate ten normal blood
samples and Calculate mean value. Enter target value in DIFF-Y and
click Send so that the result value will be in the following target value
range.
Target Value: 43.5 +/- 3.0
Click Send
XS Series S/M
4-32
June 5,2008
SECTION 5
SERVICE PROGRAM
5.3
5.3.1
5.3.2
5.3.3
5.3.4
5.3.5
Shipping1................................................................................. 8
5.3.6
Shipping2................................................................................. 9
5.4
Service Setting.................................................................... 25
5.3.7
Shipping3................................................................................. 9
Shipping2. ........................................................................................... 9
Power..................................................................................... 10
5.3.9
XS seris S/M
June 5, 2008
5.7.1 Backup
Back up XS IPU database and setting file.
(1)
Starting up
Click Start Program XSXS Tools Back up
to run the program
Figure 5-7-1
Figure 5-7-3
XS Series S/M
5-32
Figure 5-7-4
Database
(2)Main Screen
Setting Files
Contents
Input with full path the folder to be back up.
Display Folder Selection Dialog. (Figure5-7-6)
The folder selected in the folder selection dialog
will be displayed in the edit box when the dialog
exits.
Back up of the file of IPU database is performed
by checking the check box and click OK.
Default: checked
Back up of the file of IPU setting is performed by
checking the check box and click OK.
Default:checked
June 5, 2008
Figure 5-7-5
Figure 5-7-6
XS Series S/M
5-33
Subnet Mask:
(3) Run
Backup starts by clicking OK in the main screen. While backing up,
all the items in the main turn Disable,
and percentage of completion will be indicated in the progress bar
on the screen.
Default Gateway:
Figure 5-7-7
XS Series S/M
Contents
Name of the network card driver
registered in device manager is output.
DHCP setting of network card is output.
Yes: Obtain an IP address automatically
No: Assign IP address
Setting of IP address of network card is
output.
Setting in case of obtaining IP address
automatically: 0.0.0.0 fixed.
Figure 5-7-8
5-34
5.7.2 Restore
Restore XS IPU database and setting file.
(1) Starting up
Select Start Program XSXS tools Restore
Only user administrator right can restore.
Figure 5-7-11
Figure 5-7-9
Restore does not run properly when IPU is running.
Following Screen appears when IPU is running (Figure 5-7-10).
Figure 5-7-12
Figure 5-7-10
XS Series S/M
5-35
Setting File
Figure 5-7-13
Table 5-7-23
Item
Restore Folder
Selection
...
Data Base
XS Series S/M
Display Message
Contents
Input with full path the folder to be restore.
Select the folder (Date: format is according
to IPU setting)_(Time: format HHMMSS
fixed.)_(IPU version)_BACKUP.
Display the Folder Selection Dialog( Figure
5-7-14).
Folder selected in the Folder Selection
Dialog will be displayed when the dialog
closes.
Restore of Data Base File of IPU is
performedd by checking the check box.
Default: unchecked
Disable is displayed if back up folder is
not in the selected Restore Folder.
5-36
Figure 5-7-14
(3) Run
Restore starts by clicking OK in the main screen.
While restoring, all the items in the main screen display Disable,
and percentage of completion will be indicated in the progress bar
on the screen in percent figures.
Restore in the database file,
Database folder is in the restore folder.
Setting folder is in the restore folder.
If restore is completed, Restore Completion Dialog (Figure 5-7-15)
is displayed and inform the user about the completion of restore.
Figure 5-7-15
Figure 5-7-16
XS Series S/M
5-37
June 5, 2008
Add Database User exe. is used in order to add security account of user
to MSDE(Microsoft SQL Server Desktop Engine).
Log with Sysmex user to Windows as the administrative right is needed
to use this application. Access to XS IPU database is allowed to users
who registered to Windows and has administrative tight or the users who
is added the security account to MSDE. Users who have administrative
right or XS user whose security account is added to MSDE are allowed
to access to the database.
In case a limited user who is added to Windows newly and IPU is started
with this user, use Add Database User. exe and add the user to MSDE
security account.
Dialog (Figure 5-8-1-1) appears when Add Database User.exe starts
Input the desired logon user name for Windows in the edit box of dialog
and click Add User Click Close to close dialog.
IPU can be started with the added user.
AUTO_LOGON_OFF.reg
XS Series S/M
5-38
June5, 2008
AUTO_LOGON_ON.reg
XS Series S/M
5-39
June5, 2008
XS Series S/M
5-40
June 5, 2008
DBIndex.exe
XS Series S/M
5-41
DistributionPrintImageEditor.exe
XS Series S/M
5-42
Sample display in the print image display will be renewed soon after
the setting of the color is changed.
Standard setting of XS will be read by clicking Load Default
Click OK to close dialog after setting is completed.
Click Cancel to calcel the changed setting and close the dialog.
Changed setting is reflected from next IPU starting and changed
Distribution Print Image is printed on program GP printing.
June5, 2008
Host Setting.exe
Option (Serial)
Host Format: XS, XT, RAM-1, SE-9000, XE, XE-1500, SF-3000, K-1000,
K-4500,
Format Type: Default, Flg
Date Format: YYYYMMDD
Item not in use: Updating, Space Padding
Host Setting.exe is used in order to change host format for host output
with XS IPU. (changing to ASTM format is performed in IPU setting.)
Log in with Sysmex user to Windows as the administrative right is
needed to run this application.
Host format option is displayed while XS IPU installation. Run Host
Setting.exe to change host format after IPU installation.
(Tcp / Ip)
Host Format: XS, XT
Format Type: Default, Flg, For DPS
Date Format: YYYYMMDD
Item not in use: 0 padding, Space Padding
Figure 5-8-8-1 Host Setting Dialog is displayed when Host Setting.exe
starts run.
Select the format to be output in section Tcp /IP and click OK.
Click Cancel to cancel the setting.
Changed setting is reflected from next IPU star-up.
XS Series S/M
5-43
ID Changer.exe
ID Changer.exe is used to change instrument ID set in XS IPU.
Log in with Sysmex user to Windows OS as the administrative right is
needed to run this application.
Run this application when IPU is not running.
Run the program carefully. If you make mistake in ID change, analysis
is not be able to be performed.
XS Series S/M
5-44
Changed setting is reflected from next IPU start-up and unit connection
is performed.
10
IPU Remover.exe
XS Series S/M
5-45
11
Language Changer.exe
12
MSDE Remover.exe
Figure 5-8-12-2
XS Series S/M
5-46
June 5, 2008
6.3.5
6.3.5.1
2)
3)
4)
WB Aspiration Errors
Short Sample
Description:
NOTE:
In the figure above shows the state of inside XS-1000i piercer
needle just after blood aspiration. XS-800i sample probe is
also monitored in the same manner.
6-20
June 5,2008
6.3.5.2
Description:
XS Series S/M
Blood Aspiration
Sensor
NOTE::
In the figure above shows the state of inside XS-1000i piercer
needle just after blood aspiration. XS-800i sample probe is also
monitored in the same manner.
6-21
June 5, 2008
6.3.5.3
Description:
Purpose:
Method:
XS Series S/M
6-22
June 5, 2008
XS Series S/M
June 5, 2008
Appendix C
C.1
SNCS
C.1.1
C.1.2
C.1.2
C.2
C.3
C.3.1
C.3.2
C.3.3
C.3.4
C.4
C4.1
C.5
C.5.1
C.5.2
C.5.3
C.5.3
C.5.4
XS-series S/M
June 5, 2008
C.5.3
C.5.4
XS Series S/M
C-30