Professional Documents
Culture Documents
Red Valve: Condensed Catalog
Red Valve: Condensed Catalog
T H E W O R L D L E A D E R I N P I N C H VA LV E T E C H N O L O G Y
Condensed Catalog
Red
Valve:
The Best Choice for the
Toughest Applications
pinch valves and has become the preferred supplier for municipal-
ities and industrial plants worldwide. Red Valves global representative network stands ready to work with you to solve your toughest applications.
Circa 1953
Pinch Valves
Control Valves
Red Valves 5200E
Electrically Actuated
Control Valve provides
economical, reliable and
precise control.
Red Valve Company is the worlds largest manufacturer of pinch valves and has
an international reputation for quality-engineered valves designed for long
life in the toughest municipal and industrial applications. Red Valves
advanced elastomer technology is engineered into every Red Valve pinch valve,
control valve, slurry knife gate valve, pressure sensor, Redflex Expansion Joint
and revolutionary all-rubber Tideflex Check Valve. Were dedicated to listening and responding to customer needs with innovative products and services.
Flexgate Valves
Providing a bi-directional,
drop-tight shutoff, Red Valves
Flexgate Valve is designed with
a stainless steel gate and two
heavy-duty elastomer cartridge
slurry seats ideal for difficult
abrasive slurry applications.
World-Class Supplier
4
Pinch Valves Outlast Traditional Alloy Valves
Low-Maintenance Design
Red Valves pinch valves are designed specifically for
low-maintenance. The sleeve is the only replacement
part required for a pinch valve. There are no seats,
packing, seals, or bellows to routinely replace. Once a
sleeve is replaced, the valve is like new again. There is
little need to inventory other valve parts.
Elastomer Selection
P Pure Gum Rubber
P Viton
P Neoprene
P Hypalon
P EPDM
P Chlorobutyl
P Buna-N
P Food-grade materials
Standard Sleeve
Cone Sleeve*
Heavy-Duty
Downstream Wear
Flow
Direction
6
Materials of Construction
Control
Throttling control is accomplished by using a booster or proportional relay to modulate air pressure to the Type A Valve.
A changing air signal through the proportional relay will modulate the Type A Valve.
Plant Air
Supply
Air to
Type A
Type A Cone
Type A Cone Sleeve Valves are designed specifically for throttling control applications. The Cv of the valve can be matched
to any requirement by reducing the port at the center of the
sleeve. The port reduction is maintained through the downstream half of the sleeve for increased wear resistance, and
because pressure recovery occurs downstream of the valve,
cavitation is minimized.
VALVE
SIZE
1/2"
3/4"
1"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
*20" x 24"
*24" x 28"
LENGTH
L
3"
4"
5"
7"
9"
10"
12"
12-1/2"
16-1/2"
20"
22"
24"
26"
30"
34"
39"
43"
51"
HEIGHT
H
3-1/2"
3-3/4"
4-1/4"
5"
6-1/2"
7"
8"
10-5/8"
11-1/2"
13"
16-1/4"
21"
24"
22"
29-1/2"
30-1/2"
31"
38-1/2"
WORKING
PRESSURE
psi
150
150
150
150
150
150
150
150
150
150
125
100
100
75
75
50
50
50
WEIGHT
CAST IRON
lbs
5
7
9
17
32
40
55
85
119
166
235
425
640
780
910
1,275
1,704
2,100
AIR
VOLUME
ft3
.002
.002
.002
.007
.016
.028
.049
.091
.187
.327
.640
1.09
1.70
2.39
3.59
5.27
7.25
12.5
AIR
INLET
NPT
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
1"
1"
1"
2"
2-1/2"
3"
4"
4"
5"
6"
8"
10"
12"
14"
16"
18"
*20" x 24"
*24" x 28"
PORT
SIZE
P
1/2"
1"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
LENGTH
L
5"
9"
10"
12"
12-1/2"
12-1/2"
16-1/2"
20"
22"
24"
26"
30"
34"
39"
43"
51"
HEIGHT
H
4-1/4"
6-1/2"
7"
8"
10-5/8"
10-5/8"
11-1/2"
13"
16-1/4"
21"
24"
22"
29-1/2"
30-1/2"
31"
38-1/2"
WORKING
PRESSURE
psi
150
150
150
150
150
150
150
150
125
100
100
75
75
50
50
50
WEIGHT
CAST IRON
lbs
11
33
42
57
88
88
123
171
239
432
648
826
970
1,343
1,800
2,365
AIR
INLET
NPT
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
1"
1"
Type A Cone
VALVE
SIZE
P H
1"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
*20" x 24"
*24" x 28"
AVAILABLE
PORT SIZES
P**
1/4", 1/2", 3/4"
3/4", 1", 1-1/4"
3/4", 1", 1-1/2"
1", 1-1/2", 2"
1-1/2", 2", 2-1/2"
2", 2-1/2", 3"
2-1/2", 3", 4"
3", 4", 5"
4", 5", 6"
5", 6", 8"
6", 8", 10"
8", 10", 12"
10", 12", 14"
12", 14", 16"
14", 16", 18"
16", 18", 20"
LENGTH
L
5"
7"
9"
10"
12"
12-1/2"
16-1/2"
20"
22"
24"
26"
30"
34"
39"
43"
51"
HEIGHT
H
WORKING
PRESSURE
psi
4-1/4"
5"
6-1/2"
7"
8"
10-5/8"
11-1/2"
13"
16-1/4"
21"
24"
22"
29 1/2"
30 1/2"
31"
38 1/2"
150
150
150
150
150
150
150
150
125
100
100
75
75
50
50
50
WEIGHT
CAST IRON
lbs
9
17
32
40
55
85
119
166
235
425
640
810
940
1,321
1,770
2,277
AIR
INLET
NPT
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
1"
1"
Miniflex
P Simple, automatic valve design
P Body acts as built-in actuator
P No need for actuators or electric motors
P Threaded-end connections for easy installation and removal
P Cost effective, maintenance free
P Full-port design
Materials of Construction
Series 2600
VALVE
SIZE
LENGTH
L
HEIGHT
H
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
3"
3"
3-1/2"
3-1/2"
4"
4-1/2"
6-1/2"
6-1/2"
7"
1-1/2"
1-1/2"
2-1/8"
2-1/8"
2-1/4"
2-3/4"
4"
4"
4"
WORKING
PRESSURE
psi
WEIGHT
lbs*
75
75
75
75
75
75
50
50
50
1
1
1-1/2
2
2-1/2
3
9
9
10
Type A Megaflex
P Cost-effective, large-diameter valve
P Seals on solids
P Full-ported design eliminates headloss, reduces
pumping costs
Materials of Construction
P Carbon steel body
Type A Megaflex Valves are often specified as effluent discharge valves controlling raw sewage, storm
overflow, flow equalization, tailings in mining operations and bulk material handling.
Large-diameter product
brochure available.
Megaflex
VALVE
SIZE
30"
36"
48"
60"
72"
84"
LENGTH
L
HEIGHT
H
WORKING
PRESSURE
psi*
WEIGHT
lbs
60"
72"
96"
120"
144"
168"
40"
48"
60"
74"
87"
100"
50
50
50
50
25
25
4,100
5,000
6,200
7,900
9,900
10,500
The Red Valve Series 5200 Control Valve design offers maximum durability with precise control and virtually eliminates maintenance. A heavy-duty pinch mechanism positions the sleeve for accurate control over a wide flow range.
The valve has no packing to maintain or seats to wear, and
the elastomer sleeve eliminates the need for expensive alloy
bodies.
In sizes over 4, a bottom pinch bar is used to reduce the
stroke length of the valve by pre-pinching the sleeve into a
D-shaped port. The D-Port provides a more immediate
response to control signal with no loss of flow capacity.
Cone Sleeves can be specified to further enhance control
performance and match the exact Cv level desired. True
feedback positioning is accomplished through the direct
linkage of the pneumatic positioner to the valve stem shaft.
There is no splitting of the positioner output. The benefits
of true feedback positioning on Red Valves Series 5200
valves are accurate small-change response signals to the
positioner, causing similar changes in true valve position,
greatly enhancing control accuracy.
10 Materials of Construction
P Ductile iron body
P Actuators: ATO/ATC, ATO/FC,
ATC/FO
H1
Series 5200
HEIGHT
VALVE
SIZE
Closing
Action
1"
1-1/2"
2"
2-1/2"
3"
4"
LENGTH
L
7-1/4"
8-3/4"
10"
10-7/8"
11-3/4"
13-7/8"
WIDTH
W
6"
8"
8"
9"
11-1/2"
13-1/2"
H
2-7/16"
2-3/4"
3-1/2"
4"
4-1/4"
6-5/8"
ATO/ATC
H1*
19"
19"
22"
24"
26"
29"
* Consult factory for specific heights and weights of fail-close or fail-open valves.
** Higher working pressures available.
For larger valve sizes up to 72, consult factory.
Closing
Action
6"
8"
10"
12"
14"
16"
18"
20"
17-3/4"
21-3/8"
26-1/2"
29"
28"
32"
36"
40"
16-7/8"
19-7/8"
23-1/2"
27-1/2"
31"
34"
44"
40"
7-5/8"
9-1/8"
11"
11-13/16"
14"
15"
16-1/2"
17"
WORKING
PRESSURE
psi**
150
150
150
150
150
150
WEIGHT
ATO/ATC
lbs*
50
95
125
150
185
225
150
125
100
100
75
50
50
50
305
395
520
709
1,200
1,600
2,000
2,450
Materials of Construction
P Ductile iron body
11
H1
VALVE
SIZE*
1"
1-1/2"
2"
2-1/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
42"
48"
54"
LENGTH
L
7-1/4"
8-3/4"
10"
10-7/8"
11-3/4"
13-7/8"
17-3/4"
21-3/8"
26-1/2"
29"
28"
32"
36"
40"
48"
60"
72"
84"
96"
108"
WIDTH
W
HEIGHT
H
6"
8"
8"
9"
11-1/2"
13-1/2"
16-7/8"
19-7/8"
23-1/2"
27-1/2"
31"
34"
44"
40"
57"
78"
94"
110"
125"
141"
2-7/16"
2-3/4"
3-1/2"
4"
4-1/4"
6-5/8"
7-5/8"
9-1/8"
11"
11-13/16"
14"
15"
16-1/2"
17"
20-1/2"
20-1/2"
32"
38"
43"
49"
H1**
28-1/8"
28-1/4"
28-3/8"
29-5/8"
30-13/16"
34-1/8"
35-1/8"
37-7/8"
39-13/16"
40-5/8"
42-13/16"
43-13/16"
46-1/4"
46-13/16"
74-1/4"
57"
69"
80"
92"
104"
ACTUATOR
LENGTH
F**
9-1/3"
9-1/3"
9-1/3"
9-3/4"
9-3/4"
11-1/4"
11-1/4"
12-1/8"
12-1/8"
12-1/8"
12-1/8"
12-1/8"
14-7/16"
14-7/16"
15-13/16"
19-1/8"
19-1/8"
20-5/8"
20-5/8"
20-5/8"
19-1/2"
19-1/2"
20-3/8"
21-1/8"
21-1/8"
27-3/4"
28"
33-7/8"
33-7/8"
33-7/8"
33-7/8"
33-7/8"
36-7/16"
36-7/16"
41"
51"
51"
55-5/8"
55-5/8"
55-5/8"
WORKING
PRESSURE
psi
150
150
150
150
150
150
150
125
100
100
75
50
50
50
50
50
40
35
30
25
WEIGHT
lbs
87
131
164
207
240
356
443
675
810
999
1,490
1,890
2,630
3,180
3,845
6,930
12,000
19,000
28,500
40,000
Series
Series5400
5400Control
ControlValve
Valve
P Heavy-duty valve design actuator closes on centerline
P No packing to maintain, ever
P Accurate, repeatable control
P Ideal for corrosive and abrasive slurries
Red Valves Series 5400 Control Pinch Valve features centerline closure, true feedback positioning, a compact size
and accurate, repeatable variable venturi flow control.
Centerline closure is extremely important for larger size
pinch sleeves on abrasive and high velocity applications.
Centerline closure outlasts all other types of gate, plug or
ball valves on control of abrasive and corrosive slurries.
The resilient elastomer sleeve out-lasts even stellite-coated control valves.
12 Materials of Construction
H1
Series 5400
HEIGHT
VALVE
SIZE
Closing
Action
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
42"
48"
54"
LENGTH
L
9"
10"
10-1/2"
16"
20"
24"
28"
32"
36"
40"
48"
60"
72"
84"
96"
108"
WIDTH
W
10-1/2"
15-3/8"
18-1/4"
23-1/4"
29-3/4"
35"
37-1/2"
41-1/2"
51
47-3/4
57"
78"
77"
92"
106"
120"
H
5-3/4"
8-1/2"
7-7/8"
9-1/8"
10-1/2"
11-1/2"
14-1/2"
15-1/2"
17"
17-3/4"
25-1/2"
20-1/2"
32"
36"
41"
48"
ATO/ATC
H1*
WORKING
PRESSURE
psi**
26-1/2"
32"
32-1/8"
32-1/2"
43"
46"
51-3/4"
56-1/2"
59-1/2"
62-3/4"
***69"
***74"
***96"
***124"
***136"
***148"
150
150
150
150
150
150
150
150
150
150
150
50
45
40
35
30
*Consult factory for specific heights and weights of fail-close or fail-open valves.
**Higher working pressures available.
***Hydraulic or electric only.
For larger sizes up to 72, consult factory.
WEIGHT
ATO/ATC
lbs*
210
250
288
385
520
709
1,200
1,600
2,000
2,450
4,200
8,300
14,300
28,500
42,500
60,000
Series 5400
Valve
9000 Control
Pinch Valve
P Working pressures up to 720 psi
P High-pressure pinch valve design for on/off applications
P Heavy-duty polyester of Kevlar-reinforced high-pressure
sleeve is the only wetted part
P Extended service life
P Sealed-body design
Materials of Construction
13
H1
P
H
VALVE
SIZE
"
1"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
26"
720
335
240
185
245
250
200
175
320
360
265
240
250
150
Series 9000
720
720
720
720
720
720
720
720
720
720
720
720
720
720
7-3/4"
9-1/2"
10-3/4"
14"
20"
26"
32-1/2"
38-1/2"
45"
51"
57-1/2"
64"
77"
83"
HEIGHT
WIDTH
W
12"
16"
17"
20"
23"
25"
33"
40"
45"
51"
56"
62"
71"
77"
WEIGHT
H
6"
8"
9"
11"
13"
15"
20"
25"
28"
31"
34"
37"
40"
43"
H1
16"
22"
26"
28"
33"
39"
51"
62"
68"
74"
80"
87"
100"
108"
lbs
73
229
335
438
600
802
1,083
1,477
2,350
3,500
5,000
6,850
11,800
15,000
14
P Same Face-to-Face
As Gate, Plug and
Ball Valves To 12"
P 100% Full Port
P Bi-Directional,
Drop-Tight Shutoff
P No Packing To
Maintain, Ever
P Sleeve Is Only
Wetted Part: No
Need For Alloy Bodies
P Self-Cleaning
P Excellent Throttling
Characteristics
Fully closed, the Series 75
ensures drop-tight, bi-directional shutoff and an intrinsically safe design with no
packing to maintain.
P Power Plants
FGD systems,
scrubber systems,
coal handling, fly ash,
bottom ash
P Wastewater
Treatment Plants
Sludge handling, grit
removal, raw sewage,
lime, carbon slurry,
digester gas
P Mining
Tailings, flotation
control, thickener
underflow lines,
numerous other
slurry applications
P Chemical
Processes
Corrosive and
abrasive material,
powders, pellets,
waste treatment
The heart of this unique valve is the durable, flexible rubber sleeve which is reinforced with high-strength fabric.
The sleeve, which is the only part of the valve exposed to
the line process, eliminates maintenance and the need for
expensive materials. Additionally, valve operation will not
freeze, and operating torques remain constant. The design
principle is very simple two mechanical pinch bars open
and close the elastomer sleeve.
Because of its excellent control characteristics, the Manual
Pinch Valve can be used as a variable orifice. Few manual
valves have this throttling advantage. Plus, zero leakage is
maintained bi-directionally. A number of options are available, such as the Series 75B design for buried service conditions. AWWA nuts, chainwheels, stem extensions and
bevel gear actuators are also available.
Series 70
Series 75
Materials of Construction
P Cast iron or aluminum body (75)
Fabricated steel, open-frame
design (70)
H1
H1
*1 x 1/2"
*1 x 3/4"
1"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
Series 70
VALVE
SIZE
LENGTH
L
WIDTH
W
HEIGHT
H
H1
5-1/2"
5-1/2"
5-1/2"
6-1/2"
7"
7-1/2"
8"
9"
10"
10-1/2"
16"
20"
24"
28"
32"
36"
40"
48"
5-7/8"
5-7/8"
5-7/8"
9"
10-1/2"
9-1/2"
9-1/2"
10-3/4"
15-3/8"
18-1/4"
23-1/4"
31-1/4"
35"
37"
36-3/8"
44"
49-1/4"
51"
10-1/2"
10-1/2"
10-1/2"
12"
15-3/4"
16-1/4"
16-1/4"
17-1/2"
24-1/2"
24-1/4"
34"
37"
38"
36"
40"
43"
45"
51-1/2"
2-7/8"
2-7/8"
2-7/8"
3-5/8"
5-3/8"
4-3/4"
5"
5-1/2"
7-3/4"
8-3/8"
9-3/4"
10"
12"
14-3/8"
15-1/2"
20-1/2"
21"
25"
HANDWHEEL
DIAMETER
E
6"
6"
6"
6"
8"
12"
12"
12"
**18"
**18"
**18"
**18"
**18"
**18"
**18"
**18"
**18"
**18"
Series 75
Series 75 & 70
WORKING
PRESSURE
psi
SERIES 75
WEIGHT
lbs
150
150
150
150
150
150
150
150
150
150
125
100
100
75
50
50
50
50
20
20
20
34
50
62
80
85
170
186
400
500
650
1,030
1,250
1,400
1,610
2,028
SERIES 70
WEIGHT
lbs
15
15
15
20
25
36
40
50
100
100
180
200
260
473
560
690
770
1,150
15
Tideflex TF-2
Materials of Construction
PIPE O.D.
LENGTH
BILL HEIGHT
A
L
H
3/4"
3"
1-1/2"
1"
3"
1-1/2"
3"
6"
1-1/2"
2"
6"
4"
2-1/2"
8"
5"
3"
9"
5-1/2"
4"
12"
7"
5"
15-1/2"
9"
10-1/2"
16"
6"
8"
16-1/2"
13"
10"
21-1/2"
17"
20-1/2"
26-1/2"
12"
14"
26"
22"
27"
26"
16"
18"
30"
29"
20"
33"
33"
22"
36"
33"
37"
39"
24"
26"
39"
37"
Numbers indicate maximum dimensions.
CUFF LENGTH
C
1"
1"
1"
1"
1"
1-1/2"
1-1/2"
2"
2"
2"
3"
4-1/2"
4"
5"
6"
8"
8"
8"
8"
PIPE O.D.
A
28"
30"
32"
36"
38"
40"
42"
44"
48"
50"
54"
58"
60"
68"
72"
84"
90"
92"
96"
LENGTH
L
BILL HEIGHT
H
CUFF LENGTH
C
39"
42"
48"
49"
49"
49"
54"
54"
59"
59"
69"
69"
74"
74"
95"
92"
101"
101"
101"
37"
50"
53"
61"
61"
61"
71"
71"
78"
78"
97"
97"
97"
97"
115"
111"
119"
119"
119"
8"
9"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
14"
14"
16"
16"
16"
16"
16"
Tideflex TF-1
Materials of Construction
P Neoprene, Hypalon, Buna-N, EPDM, Viton and
NSF-61-approved SBR
TF-1
@@@
QQQ
@@@
QQQ
@
@@@@@@@@
QQQQQQQQ
@@@
QQQ
@@@Q
QQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
@@@@@@@@
QQQQQQQQ
35-1
TF-1 Tideflex
Check Valve
Low Level
TF-1
PIPE O.D.
A
4"
6"
8"
10"
12"
16"
20"
24"
30"
36"
42"
48"
60"
72"
35-1
CUFF LENGTH
C
1-1/2"
2"
2"
3"
4"
5"
8"
8"
9"
10"
10"
10"
13"
16"
FLANGE SIZE
ANSI
4"
6"
8"
10"
12"
16"
20"
24"
30"
36"
42"
48"
60"
72"
FLANGE O.D.
F
9"
11"
13-1/2"
16"
19"
23-1/2"
27-1/2"
32"
38-3/4"
46"
53"
59-1/2"
73"
86-1/2"
LENGTH
L
10"
14"
17-1/2"
21-1/2"
26"
32"
42"
46"
56"
65"
60"
65"
73"
84"
HEIGHT
H
8"
11-1/2"
15-1/2"
19"
22-1/2"
30"
37"
43"
55"
69"
71"
78"
91"
110"
17
Pumping Stations
Large stormwater pumping stations
use Tideflex Check Valves to ensure
that tailwater does not backflow into
stormwater catchments.
The rubber construction
of the Tideflex Valve
is resistant to saltwater,
and low headloss
characteristics are ideal
for low-lying areas.
Sewer
Systems
Tideflex Valves
prevent floodwaters
from surcharging
sewer lines and
washing raw sewage
into streets and
basements.
Effluent
Discharge
18
Tide
Techn
Airport/Highway Runoff
Tideflex Valves are used extensively for large
surface water areas that require backflow
prevention, such as airport runways, highways
and parking lots. Tideflex provides an ideal
solution where regulations require treatment
of toxic hydrocarbons from runoff.
CSO/SSO
Systems
Engine
Relia
Perform
Stormwater
Discharge
Tideflex Check Valves are
the first choice of coastal and
inland municipalities for
stormwater systems. Tideflex
Valves discharge with 1" of
differential pressure, which
maximizes pipeline storage
capacity.
eflex
nology:
eered for
able
mance.
Site Drainage
Residential areas, office parks and
commercial shopping centers use
Tideflex Valves to allow the free
flow of stormwater and to prevent
backflow and flooding from
canals, streams and rivers.
19
The Red Valve Series 39 InLine Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult materials.
The heart of the Series 39 Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure
drop across the valve at all times. Forward pressure opens the
valve automatically, and reverse pressure seals the valve.
Wear and deterioration caused by continuous operation of abrasive slurries is minimized because of the inner rubber check
valve. There are no mechanical parts such as hinges, discs or
metal seats that can freeze, corrode or bind. The unique elastomer check sleeve will seal on solids. The valves operation is
silent and non-slamming.
Face-to-face dimensions meet ANSI B16.10 specs. The valve has
thru-drilled flange holes. When ordering, specify maximum line
pressure and backpressure.
Also available, Saddle Support Technology increases the backpressure rating of Tideflex InLine Check Valves. Constructed of
steel or stainless steel, the saddle support nests inside the
Tideflex to suppost the saddle area of the valve.
Materials of Construction
P Cast iron ASTM A126 sizes up to 24
Fabricated steel body in sizes 30 - 48
20 P
BD
VALVE
SIZE
****1"
*1-1/2"
*2"
*2-1/2"
*3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"
36"
42"
48"
LENGTH
L
4-1/2"
6-1/2"
8-1/2"
9-1/2"
11-1/4"
11-1/2"
14"
19-1/2"
24-1/2"
27-1/2"
31"
34"
38-1/2"
40"
51"
60"
77"
80"
90"
HEIGHT
H
4-1/4"
5"
6-1/2"
7"
8"
10-3/4"
14"
17-1/4"
22-3/4"
24-3/4"
27-3/4"
31-1/4"
35"
42-3/4"
45-1/2"
66"
77"
90"
102"
H
H
Series 39
CLEAN OUT
PLUG SIZE
D
NONE
NONE
NONE
NONE
NONE
2"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
FLUSH CONNECTIONS
C
QTY
SIZE
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1/2"
1/2"
1/2"
1/2"
1/2"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
225
225
225
225
225
225
225
200
150
150
150
150
125
125
125
50
50
50
50
21
Materials of Construction
P Neoprene, Buna-N, EPDM and Viton
P 304/316 stainless steel clamp
P PVC mounting bushings
P 304/316 stainless steel NPT connection
7.5" C
or
5.88" B
or
2.88" A
3/4"
22
Expansion Joints
Single or Multiple Arch
Ducting Joints
Reducing Joints
Rubber Reducers
Rubber Elbows
Rubber Fittings
Rubber Pipe
Vibration Pipe
Flanged or Slip On
Teflon Lined
Smart Technology
Custom Fabricated
Sizes 1" to 108"
Sewage Treatment
Redflex Rubber Products are used
throughout the wastewater treatment
process and make up one of the most
widely used product lines in sewage
treatment plants around the world.
P Aeration
P Blowers
P Odor Control
P Sludge Pumps
P Raw Sewage
P Centrifugal Pumps
P Grit Removal
P Activated Sludge
r Products
Power Generation
Whether a plant is coal fired, combined
cycle, or co-generation, power plants
around the world use Redflex Rubber
Products on a wide range of applications.
Types of
Movement
Axial Compression
Axial Extension
P Scrubber Systems
P Cooling Water
P Pumps
P Ash Slurry
P Condenser-Turbine
P Connections
P I.D. and F.D. Fans
P Preheaters
P Precipitators
Marine
P Unaffected
by Saltwater Environment
P Reduce Electrolysis
P Reduce Maintenance
P Absorb Vibration
23
Lateral Deflection
Industrial
Angular Movement
HVAC
Redflex Rubber Products are ideal
for HVAC systems for use on chilled
water lines, condenser piping, water
chiller inlets and adjacent to compressors to stop the transmission of
vibration.
P Schools
P Stores
P Hotels
and Motels
P Commercial Office Buildings
P Hospitals
P Stadiums
Series G
Series D
24
H1
H1
Knife Gates
SERIES G
SERIES D
HEIGHT
VALVE
SIZE
LENGTH
L
WIDTH
W
2"
1-7/8"
6-1/2"
2-1/2"
1-7/8"
6-1/2"
3"
2"
8"
4"
2"
8"
10"
5"
2-1/4"
6"
2-1/4"
11-1/4"
13-1/2"
8"
2-3/4"
10"
2-3/4"
16"
12"
3"
19"
21"
14"
3"
16"
3-1/2"
23-1/2"
18"
3-1/2"
25"
27-1/2"
20"
4-1/2"
24"
4-1/2"
32"
30"
6"
38-3/4"
36"
7"
46"
*Contact factory for higher working pressures.
CLOSED
H
12"
11"
13"
14"
16"
19"
23"
27"
32"
35"
39"
43"
49"
58"
75"
90"
OPEN
H1
LENGTH
WIDTH
W
14"
13"
15"
2"
8"
17"
2"
9-1/4"
20"
25"
2-1/4"
11-1/4"
14"
2-3/4"
31"
37"
2-3/4"
16-3/4"
43"
3"
20-1/8"
21-1/2"
3"
48"
54"
3-1/2"
24"
59"
3-1/2"
25-3/4"
67"
4-1/2"
27-1/2"
78"
4-1/2"
32-1/2"
111"
5"
38-3/4"
132"
5-1/8"
46"
For larger sizes up to 72, consult factory.
L
HEIGHT
CLOSED
OPEN
H
H1
17-1/8
18-1/4
21-1/16
26-9/16"
32-7/16"
37"
43-5/8"
47-1/2"
52-5/8"
57-15/16"
66-11/16"
88-5/8"
96"
20-3/8"
22-5/8"
27-3/16
34-9/16"
43-5/8"
50-7/8"
57-1/8"
63"
70"
74-1/8"
86-15/16"
120-5/8"
134-7/8"
MAX
WORKING
PRESSURE
PSI
150
150
150
150
150
150
150
150
*100
*100
*100
*100
*100
*100
*75
*75
Pressure Sensors
Red Valve Pressure Sensors are the industry standard for protecting instrumentation and assuring accurate, dependable
pressure measurement of slurry and corrosive fluids.
Materials of Construction
P Carbon steel, stainless steel or PVC body
P Sleeves available in Pure Gum Rubber,
Neoprene, Hypalon, Chlorobutyl, Buna-N,
EPDM and Viton
25
Series 40
Series 42
A
P
Pressure Sensor
brochure available.
Series 42
NPT
SIZE
P
LENGTH
L
WORKING
PRESSURE AT 100F
psi*
1/2"
1"
1-1/2"
2"
2-7/8"
3-3/8"
3-3/8"
3-3/8"
720
720
720
720
Series 40
WEIGHT
lbs*
5
6
15
20
ANSI
FLANGE
SIZE
OUTSIDE
DIAMETER
A
LENGTH
L
1"
4-1/2"
1-1/2"
5"
2"
6"
2-1/2"
7"
3"
7-1/2"
4"
9"
5"
10"
6"
11"
8"
13-1/2"
*Sizes 10" - 36" have a wafer design.
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
2-1/8"
2-1/4"
2-1/4"
2-1/2"
WORKING
PRESSURE AT 100F
psi*
275
275
275
275
275
275
275
275
275
WEIGHT
lbs*
6
8
12
16
18
27
32
37
58
Applications
Since 1953, Red Valves quality products have been solving the worlds toughest flow control problems. With
our wide range of manual pinch valves, control valves, Tideflex Check Valves, Redflex Expansion Joints,
Tideflex Air Diffusers, Flexgate Knife Gate Valves and non-clogging pressure sensors, Red Valve has become
the leading provider of valves and related products for municipal and industrial applications worldwide.
26
Mining Industry
The rugged construction of Red Valve
products has made them the valves of
choice on tough, abrasive mining slurries.
Their simple, maintenance-free designs
allow them to operate reliably in harsh
conditions:
P Tailings
P Flotation Column Cell
P Centrifuge Control
P Lime Feed Systems
P Coal Washing
P Solids Separation
Power Industry
Lime and ash handling are two tough services
in a power plant, and the abrasion-resistant
and self-cleaning flexible elastomer sleeves of
Red Valve Pinch Valves wont scale, bridge,
plug or freeze on slurries:
P Thickener Underflow
P Wet Lime Scrubbers
P FGD Systems
P Ash Handling
P Coal Handling
P Bottom Ash
Chemical Industry
Red Valve products have no packing to
maintain and no cavities, seats or cam
action to bind valve operation. Chemical
plants use Red Valve products for many
corrosive chemical applications:
P Slurry/Chemicals
P Titanium Dioxide
P Catalyst Feed Systems
P Industrial Treatment
P Emulsive Chemicals
P Powders
27
CSO/SSO Systems
General Industry
Red Valve products are frequently specified
as original equipment by manufacturers of
industrial process systems:
P Pneumatic Conveying
P Tobacco Plants
P Refineries
P Dye Plants
P Food and Beverage Plants
P Cement, Sand, Silica
P Scrubbing
Red
Valve:
The Best Choice for the
Red Valve
T H E W O R L D L E A D E R I N P I N C H VA LV E T E C H N O L O G Y
Condensed Catalog
Toughest Applications
order was for the worlds first coal slurry pipeline, where we cre-
PHONE:
412/279-0044
FAX:
412/279-7878
www.redvalve.com
The information presented in this
catalog is provided in good faith. Red
Valve Company, Inc., reserves the right
to modify or improve its design specifications without notice and does not
imply any guarantee or warranty for any
of its products from reliance upon the
information contained herein. All orders
are subject to Red Valves standard
terms and warranty and are subject to
final acceptance by Red Valve. Red
Valve cannot be held responsible for
typographical or printers errors.
Viton and Hypalon are registered
trademarks of DuPont Dow Elastomers.
Teflon is a registered trademark of the
DuPont Company. Redflex, Tideflex,
Red Valve and the Red Valve rv
logo are registered trademarks of
Red Valve Company, Inc.
Red Valve Company, 2001, All Rights
Reserved. Red Valve is a registered trademark
of Red Valve Company, Inc.
pinch valves and has become the preferred supplier for municipalities and industrial plants worldwide. Red Valves global representative network stands ready to work with you to solve your
toughest applications.
RECYCLABLE
PAPER
RVC 2/01
Circa 1953