Professional Documents
Culture Documents
Nylacast Pom C Tech Sheet1
Nylacast Pom C Tech Sheet1
Acetal Copolymer
Polyethylene
The Copolymer grade is the ideal combination of strength, stiffness and wears resistance. It absorbs very little moisture, is easily
machinable and is genuinely porosity-free making it the preferred grade for food contact and medical applications. The product exhibits an
elevated resistance to hydrolysis, strong alkalis and thermal-oxidative degradation when compared to acetal homopolymer.
PROPERTY
TEST METHOD
NOTES
METRIC UNITS
IMPERIAL UNITS
GENERAL
Colour
Density
Moisture Absorption (Equilibrium)
Water Absorption (24 Hours)
Water Absorption (Saturation)
White / Black/Blue
ISO1183:1987
ISO 62:1999
ISO 62:1999(Modified)
ISO 62:1999
White/Black/Blue
Test Method A
g/cm
1.410
Ib/inch
0.1
0.051
0.1
Immersion, 23C
0.20
0.20
Immersion, 23C
0.90
0.90
MECHANICAL
Tensile Strength
E-modulus
Elongation at break
Compressive Strength
Compressive Modulus
Flexural Strength*
Flexural Modulus
Izod Impact Strength
Charpy Impact Strength
Hardness (Shore D)
Coefficient of Friction (Dynamic)
Limiting PV
Wear Rate
K-Factor
ISO 527-1/2:1993
MPa
70
psi
10153
ISO 527-1/2:1993
MPa
2700
psi
391603
ISO 527-1/2:1993
>15
>15
ISO 604:2002
MPa
110
psi
15954
ISO 604:2002
MPa
2600
psi
377099
ISO 178:2001
1.5mm min
MPa
80
psi
11603
1.5mm min
MPa
2600
psi
377099
KJ/m
7.20
ft.Ib/in
3.43
KJ/m
85
85
0.25
0.25
psi.ft/min
2712
ISO 178:2001
ISO 180:2000
ISO 179-2:1999
ISO 868:2003
3.14m/min, 1.75MPa
ft.Ib/in
MPa/m.min
3.14m/min, 1.75MPa
mg/km
3.14m/min, 1.75MPa
mm/Nm
in.min/ft.Ib.hr
THERMAL
Melting Temperature
Glass Transition Temperature (Tg)
Heat Deflection Temperature HDT/A
Heat Deflection Temperature HDT/B
Maximum Intermittent Service Temp
Maximum Continuous Service Temp
Minimum Intermittent Service Temp
Minimum Continuous Service Temp
Coefficient of Linear Thermal Expansion(TMA)
Thermal Conductivity
Flammability
ISO 11359-2:1999
ISO 75
1.80MPa
ISO 75
0.45MPa
170
-60
491
158
110
185
338
160
140
338
90
230
5000Hours
ISO 11359-2:1999
ISO 8301:1991
23C-55C
Mean T=20C
W/m.C
IEC 60695-11-10:2003-08
9.2x105
F-1
0.31
BTU in/ft.hr.F
HB
5.11x10-5
0.18
HB
ELECTRICAL
Dielectric Constant
Dielectric Constant (Low Frequency)
Dissipation Factor
Dielectric Strength
Volume Resistivity
Surface Resistivity ROA
Comparative Tracking Index
AVAILABILITY
ROD: 5mm 300mm DIA
IEC 60250:1969-01
IEC 60250:1969-01
3.8
100Hz
1MHz
100Hz
Hz
0.005
Hz
0.005
IEC 60243-1:1998-01-01
kV/mm
16.5
IEC 60093:1980-01
ohm.m
1x10
IEC 60093:1980-01
ohm
1x10
IEC 60112:2003-01
CTI
600
13
13
kV/in
ohm.in
3.8
419.1
14
3.93x10
13
ohm
1x10
CTI
600
All information contained in this literature corresponds with our current knowledge of the products.
Nylacast assume no liability whatsoever in respect of application, conversation or use made of the
aforementioned information or products, or any consequence thereof. The buyer undertakes all liability in
respect of the application, conversion or use of the aforementioned information or products. Existing intellectual
property rights must be observed and Nylacast reserve the right to make technical alterations.
UK