Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Mystik General Purpose Grease

Mystik General Purpose Grease is a very economical multi-purpose grease


especially suited for normal temperature/speed conditions and non-critical service
applications. This product is economical for applications requiring frequent regreasing due to a contaminating environment. Water Insoluble Economical
Mystik JT-6 High Temperature Grease

Mystik JT-6 Hi-Temp Grease is a high-temperature, lithium-complex grease that


combines excellent multi-purpose properties with a high dropping point and low
temperature pumpability that provides a wide operating temperature range. This
product provides superior protection in heavily loaded industrial, mining and
construction applications. 400 grams cartridge and 35 lbs pails

Mystik High Load MOS2 Grease

Mystik JT-6 Hi-Temp Grease with Moly is a high performance mining and
construction grease that provides superior performance where a moly-compounded,
adhesive, multi-purpose high temperature lithium complex grease is required. This
product gives optimum protection in severe environments. Mystik JT-6 Hi-Temp
Grease with Moly provides excellent performance where Ford ESA-M1C75-B, Mack
Multi-Purpose MG-C, or Caterpillar 3% Moly Lithium greases are recommended.
NLGI Certified GC-LB. An exceptionally versatile premium quality multi-purpose
lithium complex grease Fully additive treated. EP/antiwear, rust and oxidation
inhibited Contains 3% Molybdenum Disulfide (moly) for extreme service conditions
found in mining, construction, and severe industrial applications Water insoluble
and water washout resistant Superior wheel bearing and chassis performance
Superior protection to lubricate a wide variety of heavy duty automotive, agricultural,
trucking, industrial, mining, and construction equipment Provides excellent
performance where Ford ESA-M1C75-B, Mack Multi-Purpose MG-C, or Caterpillar
3% Moly Lithium greases are recommended
Mystik Marine Grease

Mystik JT-6 High Performance Marine Grease to ensure superior performance


against rusting in both fresh and sea water marine applications. Recommended for
greased automotive chassis points, trailer wheel bearings, bearing buddies, boat
lifts, hydraulic jack plates, steering components, tilt and trim systems, Etc.

Mystik JT-6 High Performance Multi-Purpose Grease

Mystik JT-6 Multi-Purpose Grease is our most water resistant and water insoluble
product. It is light colored, low staining, and has a very low oil separation rate. Mystik
JT-6 Multi-Purpose Grease provides excellent antiseize protection under high loads.
Outstanding adhesion enables this product to stay in place better than most other
greases. This product is a medium temperature range multipurpose grease for
extreme pressure loads and slow to medium speed bearings. It is excellent for
greased chassis points, fifth wheels, and water pumps. It works especially well
where extended lubrication intervals are practical, highly loaded or shock loaded
grease lubricated applications exist, and excellent rust protection is desired. It is fully
rust and oxidation inhibited. Mystik JT-6 Multi-Purpose is also available in an aerosol
form. This product penetrates hard-to-reach points to leave a protective coating of
grease. Mystik JT-6 Multi-Purpose Spray Grease has the ability to stay in place and
lubricate, even under extreme pressures and severe service. It resists rust,
corrosion, oxidation, and wear. This product is ideal for hard to reach points and
precise placement. Mystik JT-6 Multi-Purpose Spray Grease dries into a non-fluid
consistency in about 15 minutes. A medium temperature range multi-purpose
grease for extreme pressure loads, slow to medium speed bearings, greased
chassis points, fifth wheels, and water pumps Especially good where extended
lubrication intervals are practical, highly loaded or shock loaded grease lubricated
applications exist, or where excellent rust protection is desired Aerosol is excellent
for hard to reach locations

You might also like