Professional Documents
Culture Documents
Quick Configuration Tool User's Manual
Quick Configuration Tool User's Manual
Quick Configuration Tool User's Manual
V1.0.0
Table of Contents
1
Overview ................................................................................................................................... 4
1.1
Main Interface .................................................................................................................... 4
1.2
Login Web.......................................................................................................................... 5
2 Device Configuration ................................................................................................................ 7
2.1
Login to Configuration ....................................................................................................... 7
2.2
Network Parameter............................................................................................................ 7
2.3
PPPoE ............................................................................................................................... 8
2.4
System Information............................................................................................................ 9
2.5
Wireless Connection........................................................................................................ 10
3 System Upgrade ..................................................................................................................... 13
3.1
Upgrade a Single Device................................................................................................. 13
3.2
Upgrade Batch Devices ................................................................................................... 13
3.3
Notice............................................................................................................................... 14
Welcome
Thank you for using our software!
Overview
The Quick Configuration Tool is used to set basic information of device (such as IP address,
PPPoE, system information and wireless connection) and upgrade device.
Figure 1-1
Please refer to the following sheet for detail information.
Function
Note
Device
List
Here includes IP address, port, subnet mask, default gateway, Mac address, device
type and Http.
IP Version
Here you can select IP version from IPv4, IPv6 and all.
Upgrade
Refresh
Login
You can log in designated IP address to view its Quick Configuration Tool interface.
Function
Note
Logout
You can log out the device list interface as exit the Quick Configuration Tool.
Figure 1-2
Web login interface is shown as below. See Figure 1-3. You need to input username and
password to continue.
Figure 1-3
2 Device Configuration
2.1 Login to Configuration
If you want to configure the device via the Quick Configuration Tool (other than WEB page), you
can select a particular device from the device list and then click on login button.
Please follow the steps:
1. In device list, double click on device to login, or single click on a device and then
click on login button at the bottom.
The login window pops up as in Figure 2- 1.
Figure 2- 1
Please refer to the following sheet for detail information.
Function
Note
IP Address
User Name
The user name to log in the Quick Configuration Tool. For the
username to be valid, it must be registered on corresponding
device.
Password of the Quick Configuration Tool. For the password to be
valid, it must be registered on corresponding device.
Port no. of the device.
Password
Port
2.
In the pop-up window, input user name and password. The default is admin/admin.
Click on login.
Please note:
Port no. must be identical with the port no. in TCP port setup of network config on WEB.
Figure 2- 2
Please refer to the following sheet for detail information.
Function
Note
Enable
DHCP
Ethernet
card
IP version
IP address
Subnet mask
Device subnet mask (IPv4). If you enable DHCP function, you will
not be able to set subnet mask.
Gateway
MAC
address
Save
Return
2.3 PPPoE
Click on PPPoE tab to set PPPoE parameters, you can see the following interface. See Figure 23.
Figure 2- 3
Please refer to the following sheet for detail information.
Function
Note
Enable
PPPOE
User name
Password
PPPOE password.
IP address
Save
Return
Figure 2- 4
Please refer to the following sheet for detail information.
Function
Note
SN
Software version
Device name
Synchronization with PC
Manual setup
Save
Return
Figure 2- 5
Please refer to the following sheet for detail information.
Function
Note
Enable
Search SSID
Add SSID
ID list
WIFI info
Refresh
Re-search SSID.
Save
Return
Please note:
Only devices with wireless network function have the wireless network tab.
To set a SSID as hotspot, you need to double click on your designated SSID in the ID list, and
you can see a prompt as in Figure 2- 6.
Select corresponding password index value from the dropdown list, and input corresponding
password in the input password box. Click on connecting to process.
Figure 2- 6
3 System Upgrade
You can upgrade device via this Quick Configuration Tool either one by one or as a batch.
Figure 3- 1
3.
4.
5.
Figure 3- 2
3.
4.
3.3 Notice
If you cannot upgrade, please follow the steps listed below:
First, please check if device upgrading file is right or not. You shall select the proper version
to upgrade the device.
If the device is running properly and you still cannot upgrade. Please reboot the quick
configuration tool and then log in again to update the device.
If the program error occurs, while the device kernel has booted up, you can use background
upgrade port 3800 to log in the configuration tools main interface to upgrade. Please note:
the other values such as PPPoE, system information are invalid.
Note
This manual is for reference only. Slight difference may be found in the user
interface.
All the designs and software here are subject to change without prior written
notice.
Please visit our website or contact your local service engineer for more
information.