Professional Documents
Culture Documents
ebs/sites/www - Weldingunits.com/web/assets/images/features/welding Units Brochure 2014 PDF
ebs/sites/www - Weldingunits.com/web/assets/images/features/welding Units Brochure 2014 PDF
ebs/sites/www - Weldingunits.com/web/assets/images/features/welding Units Brochure 2014 PDF
since 1967
6A-0114
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
ASME Flanges
Welding Units is the customers first choice for
supply of ASME type flanges. Our ability to
manufacture any ASME type flange from our range
of stock material provides an essential quick
lead time and an ability to tailor each supply to
customers specific requirements.
Swivel Flange
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
API Flanges
Welding Units is an authentic, licensed
manufacturer of API monogrammed flanges.
API 45K
API 60K
API 75K
API Flanges Supplied:
Weld Neck
Blind
Threaded
Swivel
Studded Adaptor
Specials
Our knowledge in manufacturing API flanges
provides our customers with reassurances of
quality and technical ability even when the
application of the monogram is not required.
Our experienced engineers can offer advice on
flange selection and compatibility between
different flange configurations, e.g. R, RX, BX
and SBX types.
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Hanger Flange
Anchor Flange
569.4
120.0
+MZA
224.7
+FYA
+MYA
+FZA
+MZB
+FYB
+MYB
+FZB
2.0 Typical
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Seal Ring
Spherical
Male Nose
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Buckle Arrestors
J Lay Collars
Pipe-in-Pipe Bulkheads
These parts can be manufactured to the clients
own design or Welding Units can help develop
suitable designs based on our wide experience
in sub-sea pipeline connector products and
applicable design codes. Design analysis can
be verified where required by established
mathematical techniques or by more in-depth
FEA analysis.
End bulkhead
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Misalignment Flange
The unique Taper-Lok sealing mechanism is
ideally suited for large deflection misalignment
flanges. It provides a simple solution to a
problematic situation.
The 2 seal ring/male nose radii included on
regular Welding Units Taper-Lok connectors
that assist with sub sea assembly, are extended
to provide up to 10 of angular misalignment.
Weld Neck
Seal
Ball
Swivel Ring
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
/2 NB Dual Connection
Instrument Mounting Block
Material: ASTM A182 F316
Features: Special design
using unique Taper Lok
sealing mechanism
10
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
Material Science
Material science is a major area of interest to Welding Units. Integrity
of raw materialis a critical aspect of product quality and assured lead
time. Emphasis is placed on control of the manufacturing processes that
contribute to required material strength, impact properties and
corrosion resistance, and particular processes that refine final
microstructure of the steel.
11
Machine Shop
Welding Units machine shop boasts the most
sophisticated CNC borers, lathes and multi-axis
machining centres. A policy of extensive
re-investment at Welding Units ensures the most
reliable, powerful and accurate work centres are
available for all machining work. Welding Units
also proudly boasts an experienced skilled work
force that ensures the best results are gained
from each machine.
12
Manufacturing Range: ASME B16.5 / B16.47 Series A (MSS SP 44) and Series B (API 605), API 6A and 17D, Taper Lok, Anchor/Hanger Flanges,
Pipe in Pipe Bulkheads, Buckle Arrestors, 10 Misalignment Flanges, API Studded Crosses and Tees. Special components to 2,000mm Dia x 8,000kg.
6A-0114