Professional Documents
Culture Documents
Digital Fiber DAS
Digital Fiber DAS
Digital Fiber DAS
www.huaptec.com
Fiber reach the floors instead of reaching the building, one equipment covers one floor, so the signal
source is closer to the antenna, and the loss in transmitting and distributing is low.
covering area is small and targeted. The power distributing is more average, no need to use any lineamplifier.
fiber RU adapt micro power design, so that reduce the dimension, power consumption and cost.
Each fiber RU power can be adjusted separately.
Fiber RU output power can be adjusted intelligently.
Each RU can be monitored and controlled centrally and conveniently.
www.huaptec.com
Application
www.huaptec.com
RU30
Digital MU
Digital MU
RU20
RU10
RU11
RU10
RU11
RU12
RU20
RU21
RU22
RU30
RU31
RU32
RU40
RU41
RU42
RU12
Huaptec digital fiber DAS supports all three types, but multiple shunt type is recommended in
order to achieve the optimal system performance, which is very important to LTE data networks.
Huaptec multiple shunt type supports up to 500 remote units.
www.huaptec.com
MOU & EU
www.huaptec.com
Supported System
Power Level
Typical Gain
10dBm~20dBm
15~25dB
Medium
Power
23dBm~33dBm
28~35dB
High Power
36dBm~43dBm
38~48dB
www.huaptec.com
Frequency
movable and
Huaptec
Digital DAS
Features
Backup power
supply
tunable
Loops Function
www.huaptec.com
www.huaptec.com
Main power
module
Back up power
module
Each MU or EU has two power modules inside, main power supply is mainly working to support the
whole unit, the back up power module is a hot standby; once main power module has failures, the back
up will work immediately to ensure the network performance. At the same time, power failure alarm will
be sent back immediately for further action
MU and first level EU must have power back up
The rest EU has optional power back up as per customers request
www.huaptec.com
www.huaptec.com
Fiber Link 2
Loops
EU and RU can form loops so that the fiber Link will also have back ups, therefore when one link fails, the other link
will start to work to support the RUs in the loop
Example
1. Fiber link 1 to connect with RU1, then RU2, RU3 and RU4.
2. Then Fiber link 2 to connect with RU4, then back to connect with RU3, RU2 and RU1.
Then when RU2 has problem, Fiber link 1 to RU3 and RU4 breaks
However Fiber link 2 will start to work to support RU,4 RU3
Shortcoming: Once loop is applied, the quantity of RUs will be less since the loop link will occupy additional EU ports.
www.huaptec.com
Railway
houses
High way
2. LTE MIMO
3. Dead spots & extended coverage
Schools
4. BTS substitution
5. Narrow strip coverage
High buildings
Villa
www.huaptec.com
www.huaptec.com
www.huaptec.com
Combiner
www.huaptec.com
Remark: For those newly setup stations, if Fiber DAS is within its 1KM distance,
the time delay must be less than 4 TA
www.huaptec.com
www.huaptec.com
www.huaptec.com
www.huaptec.com
USB
Ethernet connection:
IP address with web interface
www.huaptec.com
Huaptec OMT
Features:
1. OMT software for local and remote
monitoring control
2. Installation free version
3. Terminal software to control around 100 repeaters
4. Support SMS and GPRS communication
Description:
OMT carries comprehensive functions:
1) Users and passwords can be assigned for security and
classified
rights for different users
2) Alarms, monitoring and control are all available with this
software
3) Support SMS and GPRS communication
4) Support polling function that's usually with complicated OMC
system
5) Able to control and monitor over 50 sets of repeaters. and with
the help of good performance Modem, it would be able to
support
over 150 sets of repeaters
www.huaptec.com
Huaptec OMC
Features:
1. Monitor and control over 3000sets of
different types of Repeaters
2. Based on SQL2000 server, SQL2005, My SQL
3. Web interface
4. Support SMS, GPRS, TCP/IP, GSM data
5. Support polling system