Professional Documents
Culture Documents
Group Members: Farah Deana Binti Norazhar Syed Fakhrur Radzy Bin Syed Rusli Harrven Kumar A/L Selvaraju Aidilfitri Bin Awaluddin
Group Members: Farah Deana Binti Norazhar Syed Fakhrur Radzy Bin Syed Rusli Harrven Kumar A/L Selvaraju Aidilfitri Bin Awaluddin
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
12. As shown, lie the visdalen with the back side facing
upward. Then, attach a plywood at the back side. Using 2
4 nails, hammer the nails onto the plywood to further
secure the attachment.
STEP 13
STEP 14
STEP 15
STEP 16
STEP 17
STEP 18
STEP 19
19. Attached the part 5 onto the part 3 and part 2 as such
that pre-drilled holes at part 5 is alligned with pre-drilled
holes of part 2 and part 3 as shown. Tighten the
attachment by hammering two flat top screw at each side
of part 5.
STEP 20
20. Attach the knob at such that the pre-drilled hole at the
knob is alligned with the pre-drilled hole of part 1.
Screw the long universal head screw together with the
lock washer to tighten the attached knob.
STEP 21
21. As shown, slide out the rail and insert it into the open
ing at the sides of part 2 and part 3. Secure it further by
screwing the short universal head screw at each side by
using a phillip screw driver .
STEP 22
STEP 23
STEP 24
24. To install the door knob, these 3 parts are needed, 1 long
universal head screw,1 metal plate, and 1 lock master. Construct
the interior lock of the door by securing the metal plate using
long universal head screw, including the lock master. A
precaution is noted to ensure that the lock is not installed in on
unsuitable manner as shown. Next, screw in the magnetic
stopper at the opposite side of the door of the visdalen cupboard
using two round head screw.