All antenna orders require option codes to specify the
details for your system. Most antennas include options for selecting feed input types, paint color, radome, packing, and environmental offerings. These option codes are unique characters placed before (prefix) or after (suffix) the base antenna type number. Prefix codes are optional. Suffix codes are required. Prefix Option Codes The prefix option codes include special environmental options such as high wind and corrosive environment. For additional information about special environment antennas, request Bulletin 3522.
High wind options that exceed the standard 125 mph (200 km/h) wind survival rating are available in 155 mph (250 km/h) and 200 mph (320 km/h) survival rating. These heavy duty antenna versions feature strong back structures for maintaining alignment accuracy in adverse and severe wind conditions. Use the W prefix for 155 mph (250 km/h), and the S prefix for 200 mph (320 km/h) survival ratings.
Corrosive Environment Options
The corrosive environment option is available for most antennas. This option provides long term protection in marine or salt and most industrial environments including chemical and fossil fuel areas. A special epoxy paint applied at the factory provides added protection. In addition, corrosion inhibiting compounds and protective sealants are applied during installation. UHX10-59 Standard Paint Note: High wind and corrosive environment prefix codes EUHX10-59 Corrosive enviroment paint are optional. WEUHX10-59 High wind and corrosive enviroment paint Suffix Option Codes Suffix option codes are required for your antenna order. The suffix option code is made up of three characters. The first character indicates the feed input type, the second character indicates the antenna color and applicable radome information, and the third character indicates the packing options.
Antenna Options
The option codes first character, indicating connector or
flange type, has no default. You must specify a flange type for each antenna ordered. The remaining option codes, indicating antenna color, radome, and packing, are optional. If you do not specify a code for the second and third characters you will receive the default.
Type Number with Option Code: UHX10-59-P
Note: Not all connector and flange types listed are
Description: applicable for all antennas. Refer to the antenna input options listed in each antenna ordering table. Additional options available. Contact Andrew.
UHX10-59 antenna with
CPR flange
Antenna Input Options Codes
Coaxial Applications Connector Type Option Code 7/8" EIA E "F" Flange Female F 7/16 DIN Female H Type N Female N Waveguide Applications Flange Type Option Code PBR B PDR D WR75 C CPR P UG* U *Compatible with choke or cover
Type Number with Option Code: UHX10-59-P3
Description:
UHX10-59 antenna with
CPR flange, painted gray with white TEGLAR radome
Antenna Color/Radome Option Codes
Antenna Color Gray Gray Gray
Radome Type/Color* Hypalon/White Teglar/White Not Available
Unpainted
Not Available
Gray**
Molded/Gray
Option Code 1 3 3 W (for GRIDPAK) X
* All radomes listed have Andrew logo.
** UNIPAK includes the radome and antenna in a single container. Solid reflectors available for 2 ft to 10 ft, not available for 12 ft, 15 ft or any split two piece reflectors. For additional color information see Catalog 38 pages 116-117. For additional radome information see Catalog 38 pages 116-119.
Type Number with Option Code: UHX10-59-P3A
Description:
Packing Option Codes
Packing Standard Global Pack
Option Code A
UHX10-59 antenna with
CPR flange, painted gray with white TEGLAR radome, Standard Global Pack