Professional Documents
Culture Documents
Scope and Objectives of The Course
Scope and Objectives of The Course
Name
Program Name
Course Code
Course Name
Lecture (per week)
Course
Coordinator
Name
2. Textbooks
TB1: Sung-Mo Kang and Yusuf Leblebici, "CMOS Digital Integrated Circuits Analysis
and Design", Tata McGraw Hill, 3rd Edition, 2005.
TB2: Richard C. Jaeger, Travis N. Blalock, "MICROELECTRONIC CIRCUIT DESIGN",
McGraw-Hill, 4th edition, 2011.
3. Reference Books
RB1: Neil H. E. Weste and Kamran Eshraghian ,"Principles of CMOS VLSI design ",
Pearson, 3rd edition, 2005.
RB2: Jacob Millman, Arvin Grabel, " MICROELECTRONICS", Tata McGraw-Hill, 2nd
edition, 1987.
http://www.mosis.com/vendors/view/on-semiconductor
1
http://www.vlsi.wpi.edu/cds/index.htm
2
3
.
http://www.staticfreesoft.com/index.html
4
.
http://cmosedu.com/cmos1/electric/electric.htm
4. Course Plan
Lect.
No.
(1 Hr)
1-3
5-6
7-8
Topics
UNIT 1:MOS Theory
Introduction, MOS Structure (nMOS-pMOS),
Working of MOS Transistor (nMOS-pMOS),
Different types of representation for nMOS
and pMOS.
Channel Development: Accumulation region,
Depletion region, Inversion region: weak
inversion, Moderate inversion, strong
inversion.
Current Voltage characteristics, Ideal drain
current equation development.
Difference between Enhancement and
Depletion MOSFET. MOS Transistor as Switch,
MOS capacitor characteristics, MOS device
capacitances.
Text
Book
Section No.,
Page No.
TB1
sec 1.1
sec 1.4
sec 1.5
sec 3.3
-100)
sec 3.2
TB1
TB1
TB2
RB1
TB1
(pp.1-5)
(pp.18-20)
(pp.21-23)
(pp.90
(pp.87 -90)
ST 1
12
13
14-15
16
17
18-19
20-21
Pseudo-nMOS.
TB1
22
23-24
25-26
27
28
29-31
32-33
34-36
TB1
ST2
UNIT4: Layout designing
Layout design rules (Lambda and Micron TB1
rules).
nMos Fabrication and mask generation, TB1
pMOS fabrication and mask generation
RB1
CMOS twin tub technology
RB1
Latchup-effect in CMOS
RB1
5. Evaluation Scheme:
Component 1
Component 2
40%
60%
100
Details of Component-1: There will be two sessional tests (STs) for all the theory
papers as per below stated guidelines:
(i) 1st sessional test will be from 0- 30% syllabus of the subject
(ii) 2nd sessional test will be from 31-60% syllabus of the subject.
(iii) The average of both the tests will be taken for finalizing the internal of the
subject.
(iv) Sessional Tests are compulsory.
Details of Component-2: The End Term Examination will be held at the end of
semester. As per academic guidelines minimum 75% attendance is required to
become eligible for appearing in the end term examination. The syllabus for end
term will be
i.
ii.
Designation
Course
Name
Mr. Rajvir Singh
Coordinator
H.O.D
Dean
(Academics)
Date
Signature