Professional Documents
Culture Documents
SFG MGBDI
SFG MGBDI
Three Phase Bidirectional Dual Mode Hybrid Inverter for Mini-grid System
MGBDI series is a Three phase bidirectional dual mode hybrid inverter for mini-grid system. It can operate with
diesel generator, batteries and external DC charge controller. It capable of functioning as a main supply power
source as well as providing automatic control and management of a generator and battery bank. The inverter
features very high efficiency in both charger and inverter modes with maximum efficiency of 95%. It is suitable
for hybrid power system with supplement diesel generator in off-grid areas.
R S T
DC BUS
Wind Turbine
Grid Connected System
Generator
PV Array
VSC
CCVSI
PV Array
PV Array
MPPT Charge Controller
MGBDI-series
CCVSI
PV Array
Wind Turbine
Wind Turbine
Charge Controller
Battery Bank
AC Loads in Village
MGBDI-series
Three Phase Bidirectional Dual Mode Hybrid Inverter for Mini-grid System
MODEL
RATED POWER
BATTERY
MGBDI-150-480
MGBDI-200-480
MGBDI-250-480
MGBDI-300-480
150 kW
200 kW
250 kW
300 kW
200 A
280 A
350 A
418 A
400 A
500 A
Nominal Voltage
Max. charging current
EXTERNAL DC
Nominal voltage
CHARGER
Maximum current
480 Vdc
480 Vdc
300 A
DC charge control
AC INPUT
Recommended
400 A
> 400 kW
> 500 kW
> 600 kW
generator power
Voltage
380 / 400 / 415 Vac (L-L), 220 / 230 / 240 Vac (L-N) 10%
Phase
Three phase
Frequency
50 / 60 Hz 3 Hz
Voltage
380 / 400 / 415 Vac (L-L), 220 / 230 / 240 Vac (L-N)
Voltage regulation
Phase
Three phase
Frequency
Wave form
THDi
Max. surge current
total < 4%
ISOLATION
Galvanic isolation
yes
EFFICIENCY
PROTECTION
INDICATOR
200%
> 95%
Over current, Over load, Short circuit, Over temperature, Over voltage, Under voltage
LED
LCD display
Inverter (voltage, current, frequency, power), Generator (voltage, current, frequency, power),
Battery (voltage, current, state of charge(%)), External DC charging current, Equalization date,
Battery temperature (option),Today Energy (Inverter, Battery), Accumulated energy (Inverter,
Battery), System status, Time, Date, Heat sink temperature, Data Log
AUDIABLE
ALARM
COOLING
ENVIRONMENT
0 - 45C
Relative humidity
DESIGN
0 - 95 % (Non - condensing)
Standard
AS/NZ 3100:2002
REGULATION
DIMENSION
Control Unit
80 x 205 x 105
W x H x D (cm)
Transformer Unit
WEIGHT
Control Unit
(approx. in kg)
Transformer Unit
D1*
D2**
550
550
775
775
775
1,200
1,320
1,220
1,300
1,500
D1* = 80 x 205 x 105 cm for control unit and 120 x 205 x 105 for transformer unit, D2** = 110 x 205 x 105 cm for control unit and transformer unit.
Continuous product development is our commitment. In that manner, the above specifications may be changed without prior notice.
Service in Malaysia: SFG TECHNOLOGY (M) SDN BHD. 313, 3rd Floor, Block B, Kelana Square,
No.17, Jalan SS7/26, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia
Tel: +6 03 7880 9360, Fax: +6 03 7805 1652
Service in Phillipines: Green-Tech Enterprise No. 31 Santan St.,Ynchausti Subd., Potrero,
Malabon, Metro Manila 1475 Philippines. Tel: +63 2 367 7824-25 ,28 Fax: +63 2 447 7567
Service in Thailand: Best Engineering Service Co.,Ltd. 24/79 Moo 5, Bangna-Trad Rd.,
Bangsaotong, Bangsaotong, Samutprakan Tel: +66 2 740 1033-4 Fax: +66 2 740 1034