Professional Documents
Culture Documents
T Tension
T Tension
T Tension
Outdoor
Voltage Transformers
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-1
JVA-0
50/60 Hz
Application
Designed for indoor and outdoor service; suitable for
operating meters, instruments, relays, control devices,
either singly or in combination.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
120
120
208
240
240
416
--480
--480
480
480
-600
600
--
Transformer
Rating
Primary
Voltage
Ratio
120
1:1
240
2:1
288
2.4:1
300
2.5:1
480
4:1
600
5:1
Accuracy Classification, 60 Hz
Burden
Burden
W, X, M
Y
W
X
0.3
0.6
0.3
0.6
0.3
0.6
0.3
0.6
0.3
0.6
--0.3
0.6
--0.3
0.6
0.3
0.6
0.3
0.6
0.3
0.6
Unfused
760X034001
760X034002
760X034004
760X034005
760X034006
760X034007
Catalog Number
Indoor Use Only
One Primary
Two Primary
760X034064
760X034022
760X034065
760X034023
760X034067
760X034025
760X034068
760X034026
760X034069
760X034027
760X034070
760X034028
Fuse
600 V
Class
10A
6A
6A
6A
3A
3A
Notes:
Operated at rated voltage; secondary at 120 V.
Operated at 58% of rated voltage; secondary at 69.4 V.
For continuous operation, the transformer rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, overvoltage must be
limited to 1.25 times the transformer primary voltage rating.
For Y connections, it is preferred practice to connect one lead from each voltage
transformer directly to the grounded neutral, using a fuse only in the line side of the
primary. By this connection a transformer can never be alive from the line side by
reason of a blown fuse on the grounded side.
2-2
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Secondary
Terminals
Primary
Terminals
Polarity
Please refer to General Product Information, item 7.1.
Fusing
Nameplate
Please refer to General Product Information, item 6.1.
Maintenance
Please refer to General Product Information, item 10.1
and pages 24-27.
Inches
(CM)
6.25
(15.88)
6.00
(15.24)
5.00
(12.70)
0.50
(1.27)
6.69
(16.99)
6.00
(15.24)
N.P.
0.50
(1.27)
X1
X
2
5.00
(12.70)
2.00
(5.08)
5.25
(13.34)
5.18
(13.16)
X
2
5.00
(12.70)
H2
4.37
(11.10)
X2
X
1
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-3
JVP-1
50/60 Hz
Application
Designed for indoor and outdoor service; suitable for
operating meters, instruments, relays, and control
devices.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve ........................................... 9689241831
Outline Drawings:
Unfused with Primary Terminal Bushing . A9925192
Unfused with Primary Terminal Cover ..... A9925193
Two Fuse ..................................................... A9925195
Wiring Diagram .................... refer to page 42, figure 5
JVP-1 voltage transformer
(two primary fuses with fuse covers)
Y
Y
240
240
416
--480
--480
480
480
-600
600
--
Transformer
Rating
Primary
Voltage
Ratio
240
2:1
288
2.4:1
300
2.5:1
480
4:1
600
5:1
Accuracy Classification, 60 Hz
Burden
Burden
W, X, M, Y
Z
W, X
0.3
1.2
0.6
0.3
1.2
-0.3
1.2
-0.3
1.2
0.6
0.3
1.2
0.6
Catalog Number
Unfused
Primary Terminal
Bushings
Cover
761X030001
761X030006
761X030002
761X030007
761X030003
761X030008
761X030004
761X030009
761X030005
761X030010
Fuse
Two Fuses, 600 V
Indoor Use Class
761X020001
5A
761X020002
5A
761X020003
5A
761X020004
5A
761X020005
5A
Notes:
Operated at rated voltage; secondary at 120 V.
Operated at 58% of rated voltage; secondary at 69.4 V.
For continuous operation, the transformer rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, overvoltage must be
limited to 1.25 times the transformer primary voltage rating.
For Y connections, it is preferred practice to connect one lead from each voltage
transformer directly to the grounded neutral, using a fuse only in the line side of the
primary. By this connection a transformer can never be alive from the line side by
reason of a blown fuse on the grounded side.
2-4
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Fuse Covers
Secondary
Terminals
Primary
Conduit Box
Terminals
Polarity
Please refer to General Product Information, item 7.1.
Nameplate
Please refer to General Product Information, item 6.9.
Maintenance
Please refer to General Product Information, item 10.1
and pages 24-27.
Inches
(CM)
7.19
(18.26)
0.44 (1.11)
Dia. hole
10.88
(27.64)
10.00
(25.40)
X1
N.P.
0.66
(1.66)
0.81
(2.06)
2.25
(5.72)
X2
0.81
(2.06)
5.50
(13.97)
7.00
(17.78)
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-5
Application
JVW-3
50/60 Hz
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9689241268
Excitation Curve ............................................... 5454043
Outline Drawing ............................................... 8949945
Wiring Diagram .................... refer to page 42, figure 5
Y
Y Only
2400
2400
4160
4200
4200
--4800
4800
---
Transformer
Rating
Primary
Voltage
Ratio
2400
20:1
4200
35:1
4800
40:1
Notes:
For continuous operation, the transformer-rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, over-voltage must be
limited to 1.25 times the transformer primary-voltage rating.
Applies to transformers connected Y-Y on a circuit in which the line-to-line voltage
is the same as the transformer-rated primary voltage. In each case, the transformer
is operated with reduced voltage and reduced excitation (58% of normal). In
2-6
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Polarity
Primary
Terminals
Nameplate
Please refer to General Product Information, item 6.4.
Secondary
Terminals
Maintenance
Ground Terminal
Inches
(CM)
10.50
(23.67)
7.56
(19.20)
7.13
(18.11)
6.25
(15.88)
9.50
(24.13)
10.38
(26.37)
0.44
(1.12)
12.75
(32.39)
HY-BUTE 60
N.P.
7.00
(17.78)
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-7
JVW-4/JVW-5
60 Hz
AVAILABLE
Application
Designed for outdoor service; suitable for operating
meters, instruments, relays, and control devices.
When choosing your GE Instrument Transformer, don't forget to explore the benefits of
using GE's 0.15 accuracy class AccuBute line.
See page 2.10.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
JVW-4
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9689241659
Excitation Curves:
60:1 & 70:1 ............................................... 9689241591
100:1 & 120:1 ........................................... 9689241629
Outline Drawing; Two-Bushing
Transformer ...................................................... 9932529
Wiring Diagram .................... refer to page 42, figure 5
JVW-4 -5, two-bushing model
Y
Y Only
2,400
2,400
4,160
4,200
4,200
7,280
4,800
4,800
8,320
7,200
7,200
--------------12,000
12,000
12,000
14,400
14,400
14,400
Catalog Number
GY Only
--------7200
8400
-----
Transformer
Rating
Primary
Voltage
Ratio
2,400
20:1
4,200
35:1
4,800
40:1
7,200
60:1
7,200
60:1
8,400
70:1
12,000
100:1
14,400
120:1
Notes:
For continuous operation, the transformer-rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, over-voltage must be
limited to 1.25 times the transformer primary-voltage rating for two-bushing models,
and 1.40 times the rating for single-bushing models.
Applies to transformers connected Y-Y on a circuit in which the line-to-line voltage
is the same as the transformer-rated primary voltage. In each case, the transformer
is operated with reduced voltage and reduced excitation (58% of normal). In
JVW-4
BIL 75 kV
Two-Bushing
Model
764X030011
764X030012
764X030013
764X030014
---------
JVW-5
BIL 110 kV
Single-Bushing
Two-Bushing
Model
Model
----------------765X030051
765X030042
765X030052
765X030044
--765X030045
--765X030046
2-8
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Ground Terminal
Polarity
Please refer to General Product Information, item 7.2.
Nameplate
Please refer to General Product Information, item 6.4.
Rating Identification
Please refer to General Product Information, item 13.1.
Primary
Terminals
Secondary
Terminals
Maintenance
Please refer to General Product Information, item 10.1
and pages 24-27.
Note:
1. Voltage transformers of this type are available for use in 50 Hz applications in many ratings. However, Industry Standard IEEE 57.13 to which
we test transformers does not apply at 50 Hz. Customers who order
voltage transformers for 50 Hz application should provide an accuracy
specification including Burden VA and Power Factor. If an accuracy
specification is not made available, the transformer(s) will be tested at
60 Hz with test burdens as defined in IEEE 57.13 for 60 Hz application.
14.25
(36.20)
Inches
(CM)
13.13
(33.35)
12.25
(31.12)
9.94
8.63
(25.25) (21.92)
9.50
(24.13)
13.19
(33.50)
11.00
(27.94)
H1
16.88
(42.88)
12000
X1
GRD
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-9
JVW-4A/JVW-5A
60 Hz
Application
Designed for outdoor service; suitable for operating
meters, instruments, relays, and control devices. These
transformers have 0.15 accuracy when operated within
10 percent of rated voltage within their burden
capability.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
JVW-4A
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9932600132
Excitation Curve ......................................... 9932600134
Outline Drawing:
Two-Bushing Model ...................................... 9935466
Wiring Diagram .................... refer to page 42, figure 5
JVW-5A
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9932600132
Excitation Curve ......................................... 9932600134
Outline Drawings:
Two-Bushing Model ...................................... 9935466
Single-Bushing Model ................................... 9935467
Wiring Diagram .................... refer to page 42, figure 5
Y
2,400
2,400
4,200
4,200
4,800
4,800
7,200
7,200
7,200
7,200
7,620
7,620
8,400
8,400
----14,400
14,400
Transformer
Rating
Y Only
4,160
7,280
8,320
12,470
13,200
14,550
12,000
14,400
Primary
Voltage
2,400
4,200
4,800
7,200
7,200
7,620
8,400
12,000
---
Ratio
20:1
35:1
40:1
60:1
60:1
63:5:1
70:1
100:1
120:1
JVW-4A
BIL 75 kV
Two-Bushing
Model
764X031011
764X031012
764X031013
764X031014
-----------
Catalog Number
JVW-5A
BIL 110 kV
Single-Bushing
Two-Bushing
Model
Model
----------765X032041
----765X032051
765X032042
--765X032043
765X032052
765X032044
--765X032045
--765X032046
Note
For continuous operation, the transformer-rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, over-voltage must be
limited to 1.25 times the transformer primary-voltage rating for two-bushing models,
and 1.40 times the rating for single-bushing models.
2-10
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Primary
Nameplate
Please refer to General Product Information, item 6.4.
Rating Identification
Please refer to General Product Information, item 13.1.
Terminals
Maintenance
Secondary
Terminals
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-11
JVW-110
60 Hz
Application
Designed for outdoor service; the Type JVW-110 is a
metering voltage transformer specifically designed to
meet the requirements of 15 kV outdoor metering
applications.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9932600214
Excitation Curve; 60:1 ................................ 9689241980
Outline Drawings:
Two-Bushing Model ...................................... 9932529
Single-Bushing Model ................................... 9932530
Wiring Diagram .................... refer to page 42, figure 5
Y
Y Only Only
------7,200
------8,400
12,000 12,000 12,000
--14,400 14,400 14,400
---
Transformer
Rating
Primary
Voltage Ratio
7,200
60:1
8,400
70:1
12,000 100:1
14,400 120:1
Notes:
For continuous operation, the transformer-rated primary voltage should not be
exceeded by more than 10%. Under emergency conditions, over-voltage must be
limited to 1.25 times the transformer primary-voltage rating for two-bushing models,
and 1.40 times the rating for single-bushing models.
Applies to transformers connected Y-Y on a circuit in which the line-to-line voltage
is the same as the transformer-rated primary voltage. In each case, the transformer
is operated with reduced voltage and reduced excitation (58% of normal). In
determining the accuracy classification under such conditions, the Volt-Ampere
rating of the burden is maintained constant, regardless of the transformer
secondary voltage.
Catalog Number
SingleTwoBushing
Bushing
Model
Model
765X031115
765X031111
765X031116
765X031112
--765X031113
--765X031114
The prime symbol () is used to signify that these burdens do not correspond to
standard ANSI definitions.
Single-bushing design with removable grounding strap.
12,470 in Y configuration.
14,560 in Y configuration.
2-12
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Polarity
Nameplate
Please refer to General Product Information, item 6.4.
Primary
Terminals
Rating Identification
Secondary
Maintenance
Terminals
14.25
(36.20)
Inches
(CM)
12.25
(31.12)
13.13
(33.35)
9.94
8.63
(25.25) (21.92)
9.50
(24.13)
13.19
(33.50)
0.44
(1.12)
0.44 (1.12) Dia.
(8 holes)
10.00
(25.40)
H1
16.88
(42.88)
12000
X1
GRD
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-13
JVW-6
60 Hz
Application
Designed for outdoor service; the Type JVW-6 is a
metering voltage transformer specifically designed to
meet the requirements of 25 kV outdoor metering
applications.
When choosing your GE Instrument Transformer, don't forget to explore the benefits of
using GE's 0.15 accuracy class AccuBute line.
See page 37.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9689241738
Excitation Curve ......................................... 9689241788
Outline Drawings:
Two-Bushing Model ...................................... 9930950
Single-Bushing Model ................................... 9930949
Wiring Diagram .................... refer to page 42, figure 5
Y
Y Only GY Only Voltage Ratio Rated Voltage Rated Voltage
------12,000 12,000 100:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y' 766X031001
------14,400 14,400 120:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y' 766X031002
18,000 18,000 18,000
--18,000 150:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y'
--24,000 24,000 24,000
--24,000 200:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y'
--Notes:
These single bushing transformers are suitable for application to grounded systems,
for operation line-to-ground only. They will operate without damage connected lineto-ground at 1.40 times the transformer-rated voltage for one minute. If it should
become necessary to apply these grounded wye voltage transformers to an ungrounded
system, refer to the nearest General Electric Sales Office for a system analysis study.
These two-bushing transformers are designed for operation line-to-line. They may also
be operated line-to-ground or line-to-neutral at reduced voltage (58% of rated voltage).
Number
TwoBushing
Model
--766X031006
766X031003
766X031004
The prime symbol () is used to signify that these burdens do not correspond to
standard ANSI definitions.
20,780 in Y configuration.
24,940 in Y configuration.
2-14
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Polarity
Core
Coils
Please refer to General Product Information, item, 3.20.
Primary
Nameplate
Please refer to General Product Information, item 6.2.
Terminals
Rating Identification
Please refer to General Product Information, item 13.1.
Secondary
Terminals
Maintenance
Ground Terminal
Note:
1. Voltage transformers of this type are available for use in 50 Hz applications in many ratings. However, Industry Standard IEEE 57.13 to which
we test transformers does not apply at 50 Hz. Customers who order
voltage transformers for 50 Hz application should provide an accuracy
specification including Burden VA and Power Factor. If an accuracy
specification is not made available, the transformer(s) will be tested at
60 Hz with test burdens as defined in IEEE 57.13 for 60 Hz application.
14.25
(36.20)
13.13
(33.35)
12.25
(31.12)
Inches
(CM)
9.94
8.63
(25.25) (21.92)
9.50
(24.13)
0.44
(1.12)
0.44 (1.12) Dia.
(8 holes)
13.19
(33.50)
10.00
(25.40)
11.00
(27.94)
H1
18.25
(46.36)
18000
X1
X2
GRD
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-15
JVW-150
60 Hz
Application
Designed for outdoor service; the Type JVW-150 is a
metering voltage transformer specifically designed to
meet the requirements of 25 kV outdoor metering
applications.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9932600220
Excitation Curve ......................................... 9932600167
Outline Drawings:
Two-Bushing Model ...................................... 9935492
Single-Bushing Model ................................... 9935491
Wiring Diagram .................... refer to page 42, figure 5
Y
Y Only GY Only Voltage Ratio Rated Voltage Rated Voltage
------12,000 12,000 100:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y' 766X034001
------14,400 14,400 120:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y' 766X034002
18,000 18,000 18,000
--18,000 150:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y'
--24,000 24,000 24,000
--24,000 200:1 0.3 W, X, M, Y 0.3 W, X; 1.2 M, Y 0.3 W', X', M', Y'
--Notes:
These single bushing transformers are suitable for application to grounded systems,
for operation line-to-ground only. They will operate without damage connected lineto-ground at 1.40 times the transformer-rated voltage for one minute. If it should
become necessary to apply these grounded wye voltage transformers to an ungrounded
system, refer to the nearest General Electric Sales Office for a system analysis study.
These two-bushing transformers are designed for operation line-to-line. They may also
be operated line-to-ground or line-to-neutral at reduced voltage (58% of rated voltage).
Number
TwoBushing
Model
--766X034006
766X034003
766X034004
The prime symbol () is used to signify that these burdens do not correspond to
standard ANSI definitions.
20,780 in Y configuration.
24,940 in Y configuration.
2-16
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Polarity
Core
Coils
Please refer to General Product Information, item, 3.2.
Primary
Nameplate
Please refer to General Product Information, item 6.2.
Terminals
Rating Identification
Please refer to General Product Information, item 13.1.
Secondary
Terminals
Maintenance
Ground Terminal
Note:
1. Voltage transformers of this type are available for use in 50 Hz applications in many ratings. However, Industry Standard IEEE 57.13 to which
we test transformers does not apply at 50 Hz. Customers who order
voltage transformers for 50 Hz application should provide an accuracy
specification including Burden VA and Power Factor. If an accuracy
specification is not made available, the transformer(s) will be tested at
60 Hz with test burdens as defined in IEEE 57.13 for 60 Hz application.
Inches
(CM)
2.56
(6.50)
19.63
(49.86)
13.19
(33.50)
Base Plate
12.88
(33.72)
8.75
(22.23)
2.50
(6.35)
0.44
(1.12)
N.P
2.50
(16.35)
0.44
(1.12)
12.88
(32.72)
15.00
(38.10)
13.88
(35.26)
15.00
(38.10)
19.00
(48.26)
20125
10.75
(27.31)
X1 X2
GND
13.75
(34.93)
13.75
(34.93)
17.88
(45.42)
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-17
Application
20,125 V to 34,500 V
Outdoor Voltage
JVW-7
60 Hz
AVAILABLE
When choosing your GE Instrument Transformer, don't forget to explore the benefits of
using GE's 0.15 accuracy class AccuBute line.
See page 37.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
Accuracy Curve at
120 Secondary Volts, 60 Hz ....................... 9689241894
Excitation Curve ......................................... 9932600160
Outline Drawings:
Model Number 767X031001 ........................ 9932423
Model Number 767X031002 ........................ 9932424
Model Number 767X031003 ........................ 9932424
Model Number 767X031004 ........................ 9932424
Model Number 767X031005 ........................ 9935406
Model Number 767X031006 ........................ 9935406
Model Number 767X031007 ........................ 9935406
Model Number 767X031011 ........................ 9935407
Model Number 767X031012 ........................ 9935408
Wiring Diagram .................... refer to page 42, figure 5
Y
Y
Single Bushing Model
------------Two-Bushing Model
27,600 27,600
34,500 34,500
23,000 23,000
27,600 27,600
34,500 34,500
23,000 23,000
Transformer
Rating
GY
Primary
Only Only Voltage
Ratio
-------
34,500
34,500
34,500
20,125
20,125
20,125
175:1
175/300:1
175 & 300:1
200 0.3 W, X, M, Y
200 0.3 W, X, M, Y
200 0.3 W, X, M, Y
-------------
-------------
27,600
34,500
23,000
26,700
34,500
23,000
240:1
300:1
200:1
240 & 240:1
300 & 300:1
200 & 200:1
150
150
150
150
150
150
Notes:
These single bushing transformers are suitable for operation line-to-ground only
on effectively grounded systems. They are the grounded-neutral terminal type, and
are capable of operation at 1.40 times the transformer-rated voltage for one minute
without exceeding 175C temperature rise. If it should become necessary to apply
these grounded wye voltage transformers to an ungrounded system, refer to the
nearest General Electric Sales Office for a system analysis study.
0.3
0.3
0.3
0.3
0.3
0.3
W,
W,
W,
W,
W,
W,
X,
X,
X,
X,
X,
X,
M,
M,
M,
M,
M,
M,
Y
Y
Y
Y
Y
Y
------0.3
0.3
0.3
0.3
0.3
0.3
W,
W,
W,
W,
W,
W,
X;
X;
X;
X;
X;
X;
1.2
1.2
1.2
1.2
1.2
1.2
------M,
M,
M,
M,
M,
M,
Y
Y
Y
Y
Y
Y
0.3
0.3
0.3
0.3
0.3
0.3
W',
W',
W',
W',
W',
W',
X',
X',
X',
X',
X',
X',
Catalog
Number
767X031001
767X031011
767X031012
M',
M',
M',
M',
M',
M',
Y'
Y'
Y'
Y'
Y'
Y'
767X031002
767X031003
767X031004
767X031005
767X031006
767X031007
These two-bushing transformers are designed for operation line-to-line. They may also
be operated line-to-ground or line-to-neutral at reduced voltage (58% of rated voltage).
The prime symbol () is used to signify that these burdens do not correspond to
standard ANSI definitions.
2-18
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
Polarity
Core
Coils
Please refer to General Product Information, item 3.2.
Primary
Nameplate
Please refer to General Product Information, item 6.2.
Terminals
Rating Identification
Please refer to General Product Information, item 13.1.
Secondary
Terminals
Maintenance
Ground Terminal
Note:
1. Voltage transformers of this type are available for use in 50 Hz applications in many ratings. However, Industry Standard IEEE 57.13 to which
we test transformers does not apply at 50 Hz. Customers who order
voltage transformers for 50 Hz application should provide an accuracy
specification including Burden VA and Power Factor. If an accuracy
specification is not made available, the transformer(s) will be tested at
60 Hz with test burdens as defined in IEEE 57.13 for 60 Hz application.
Inches
(CM)
2.56
(6.50)
19.63
(49.86)
13.19
(33.50)
Base Plate
12.88
(33.72)
8.75
(22.23)
2.50
(6.35)
0.44
(1.12)
N.P
2.50
(16.35)
0.44
(1.12)
12.88
(32.72)
15.00
(38.10)
13.88
(35.26)
15.00
(38.10)
19.00
(48.26)
20125
10.75
(27.31)
X1 X2
GND
13.75
(34.93)
13.75
(34.93)
17.88
(45.42)
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-19
24,000 V to 69,000 V
Outdoor Voltage, Dry-Type
JVS/JVT
60 Hz
Application
Designed for outdoor service; suitable for operating
meters, relays, and control devices.
Weight - Shipping/Net
(approximate, in pounds)
Reference Drawings
JVS
Accuracy Fan Curves at 120 Secondary Volts, 60 Hz:
JVS-150/JVS-200 ...................................... 9689241521
JVS-250/JVS-350 ...................................... 9689241485
Excitation Curves:
JVS-150 ..................................................... 9689241716
JVS-200 ..................................................... 9689241718
JVS-250 ..................................................... 9689241721
JVS-350 ..................................................... 9689241723
Outline Drawings:
JVS-150/JVS-200 ............................................ 9926176
JVS-250/JVS-350 ............................................ 9926369
Wiring Diagram JVS ............. refer to page 43, figure 8
ANSI Accuracy
Burden Per ANSI
Operated at Operated at 58% Thermal
Transformer
Rated Primary of Rated Primary Rating
Voltage
Rating
30C
Voltage
Primary
BIL
Ambient
Voltage
Ratio
(kV)
W, X, M, Y
Z
ZZ
kVA
14,400 120/200 & 120/200:1 150
------3.0
24,000
200 & 200:1
150
0.3
0.6
1.2
3.0
27,600
240 & 240:1
200
0.3
0.6
1.2
3.0
20,125 175/300 & 175/300:1 200
------3.0
34,500
300 & 300:1
200
0.3
0.6
1.2
3.0
27,600 240/400 & 240/400:1 250
------5.0
46,000
400:1
250
0.3
0.3
0.6
4.5
40,250 350/600 & 350/600:1 350
------5.0
69,000
600:1
350
0.3
0.3
0.6
4.5
Type
JVS-150
JVT-150
JVT-200
JVS-200
JVT-200
JVS-250
JVT-250
JVS-350
JVT-350
Catalog
Number
766X030002
766X030001
767X030003
767X030002
767X030001
768X030002
768X030001
769X030002
769X030001
Notes:
Applies to transformers wye-connected on a circuit in which the line-to-line voltage
Two tapped secondaries are provided, each with the ratio as shown.
is the same as the transformer-rated primary voltage. In such cases the transformer
The single-bushing transformers are suitable for operation line-to-ground only on
is operated at 58% of the normal voltage. In determining the accuracy classification
grounded systems. If it should become necessary to apply these voltage transformers
under such conditions, the burden volt-amperes are maintained at the valve obtained
to systems which are ungrounded or provided through high impedance, refer to the
at full rated voltage.
nearest General Electric Sales Office for a system analysis study. These voltage
With both secondary windings in parallel. When windings are used separately the
transformers are capable of operating at 173% of rated voltage for one minute
value is 1.5 kVA per winding. If only one winding is used separately, the value is 2.0 kVA.
without exceeding 175C temperature rise.
These two-bushing transformers are designed for operation line-to-line. They may
also be operated line-to-ground or line-to-neutral at reduced voltage (58% of
rated voltage).
2-20
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
JVT
Accuracy Curves at 120 Secondary Volts, 60 Hz:
JVT-150/JVT-200 ...................................... 9689241520
JVT-250/JVT-350 ...................................... 9689241488
Excitation Curves:
JVT-150 ..................................................... 9689241717
JVT-200 ..................................................... 9689241720
JVT-250 ..................................................... 9689241722
JVT-350 ..................................................... 9689241724
Outline Drawings:
JVT-150/JVS-200 ............................................ 9926175
JVT-250/JVS-350 ............................................ 9926391
Wiring Diagram .................... refer to page 43, figure 7
Terminals
Polarity
Please refer to General Product Information, item 7.1.
Bushing
Nameplate
Core
Maintenance
Coils
Note:
1. Voltage transformers of this type are available for use in 50 Hz applications in many ratings. However, Industry Standard IEEE 57.13 to which
we test transformers does not apply at 50 Hz. Customers who order
voltage transformers for 50 Hz application should provide an accuracy
specification including Burden VA and Power Factor. If an accuracy
specification is not made available, the transformer(s) will be tested at
60 Hz with test burdens as defined in IEEE 57.13 for 60 Hz application.
Primary
Terminals
37.00
(93.98)
Max.
JVT mechanical
dimensions
42.00
(106.68)
Max.
N.P.
3.25
(8.26)
Max.
Inches
(CM)
20.44
(51.92)
Max.
0.56 (1.42)
Dia. hole
42.25
(105.74)
Max.
N.P.
2.38
(6.05)
JVS mechanical
dimensions
20.00
(50.80)
Max.
16.38
(41.61)
Data subject to change without notice.
GE Meter 130 Main St., Somersworth, NH 03878 USA & Canada: (800) 626-2004 Fax: (518) 869-2828; GE Worldwide: (518) 869-5555
2-21