Professional Documents
Culture Documents
! Catalog RFS 2014
! Catalog RFS 2014
! Catalog RFS 2014
TABLE OF CONTENTS
Product Datasheets
AP186516-CT0 Vertical Polarized Antenna, 1710-1880, 65deg, 17dBi,
1.3m, FET, 0deg
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
101
103
105
107
109
111
113
115
117
119
121
123
125
127
129
131
133
135
137
139
141
143
145
147
149
151
153
155
157
159
161
163
165
167
169
171
173
175
177
179
181
183
185
187
APX86-906513L-CT0 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 15.0dBi, 1.3m, FET, 0deg
189
APX86-906513L-CT12 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 14.7dBi, 1.3m, FET, 12deg
191
APX86-906513L-CT4 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 15.0dBi, 1.3m, FET, 4deg
193
APX86-906513L-CT8 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 14.8dBi, 1.3m, FET, 8deg
195
APX86-906515S-CT0 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 17dBi, 2m, FET, 0deg
197
APX86-906515S-CT6 Optimizer Cellular Dual Polarized Antenna, 806960, 65deg, 17dBi, 2m, FET, 6deg
199
APX86-906516S-CT0 Optimizer Cellular Dual Polarized Antenna, 806960, 65/62deg, 18dBi, 2.7m, FET, 0deg
201
APX86-906516S-CT6 Optimizer Cellular Dual Polarized Antenna, 806960, 65/63deg, 18dBi, 2.7m, FET, 6deg
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
247
249
251
253
255
257
259
APXV18-206513T-C-A20 Optimizer Dual Polarized Antenna, 17102170, 65deg, 15.4dBi, 0.7m, VET, 0-10deg
261
263
APXV18-206516H-C-A20 Optimizer Dual Polarized Antenna, 17102200, 65deg, 17.5-18.1dBi, 1.3m, VET, 0-10deg RET
265
267
APXV18-206517H-C-A20 Optimizer Dual Polarized Antenna, 17102200, 65deg, 18.5-19dBi, 1.9m, VET, 0-10deg RET
269
271
273
275
277
APXV18-276516-C Cellular Cross Polarized High Band Antenna, 17102700, 65deg, 16.9-18.6dBi, 1.3m, VET, 0-12deg
279
281
APXV23-276512-C Cellular Cross Polarized High Band Antenna, 23002700, 60deg, 14.8dBi, 0.5m, VET, 0-10deg
283
APXV23-276516-C Cellular Cross Polarized High Band Antenna, 23002700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
285
287
289
291
293
295
297
299
301
303
305
307
309
311
313
315
317
319
321
323
325
327
329
331
333
APXVLL13-C Optimizer Side-by-Side Dual Polarized Antenna, 17102700, 65deg, 17.1-18.3dBi, 1.3m, VET, 0-12deg
335
APXVLL13N-C WindMaster Cross Polarized Quad-Pol Antenna, 17102700, 65deg, 17.5-18.5dBi, 1.3m, VET, 0-12deg
337
339
APXVMM13-C Optimizer Side-by-Side Dual Polarized Antenna, 23002700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
341
343
APXVRR13-C Optimizer Side-by-Side Dual Polarized Antenna, 17102200, 65deg, 18.0dBi, 1.3m, VET, 0-10deg
345
347
APXVRR20-C Optimizer Side-by-Side Dual Polarized Antenna, 17102200, 65deg, 18.7dBi, 1.9m, VET, 0-10deg
349
351
AP186516-CT0
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33 horizontal beamwidth for highway
coverage.
Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
65
7.5
0
17 (14.9)
>14
35 (typical 40)
Vertical
< 1.3:1
>150
50
400
Direct Ground
7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP186516-CT0
Rev: A1
-1-
AP186516-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP186516-CT0
Rev: A1
-2-
AP186516-CT2
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33 horizontal beamwidth for highway
coverage.
Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
65
7.5
2
17 (14.9)
>14
35 (typical 40)
Vertical
< 1.3:1
>150
50
400
Direct Ground
7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP186516-CT2
Rev: A1
-3-
AP186516-CT2
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP186516-CT2
Rev: A1
-4-
AP189016-CT2
Product Description
Dense urban network and rural tri sectorial site.
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
The distance between antennas can be reduced thus minimizing visualimpact.
Ensures very homogeneous coverage in 3-sector configuration.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
90
5
2
17.5 (15.4)
>20
>24
Vertical
< 1.4:1
>150
50
300
Direct Ground
7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP189016-CT2
Rev: A1
-5-
AP189016-CT2
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP189016-CT2
Rev: A1
-6-
AP196516-CT0
Product Description
Dense urban network and rural tri sectorial site.
Features/Benefits
Optimized null fill for improved density of coverage.
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
The distance between antennas can be reduced thus minimizing visualimpact.
Ensures very homogeneous coverage in 3-sector configuration.
Coupled antennas side by side leads to H33 narrow beam/high gain antenna.
Gain tolerance of +/- 1dB
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1850-1990
65
7
0
18.0 (15.9)
>14
35 (typical 40)
Vertical
< 1.5:1
>150
50
400
Direct Ground
7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP196516-CT0
Rev: A1
-7-
AP196516-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP196516-CT0
Rev: A1
-8-
AP196516-CT2
Product Description
Dense urban network and rural tri sectorial site.
Features/Benefits
Optimized null fill for improved density of coverage.
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
The distance between antennas can be reduced thus minimizing visualimpact.
Ensures very homogeneous coverage in 3-sector configuration.
Coupled antennas side by side leads to H33 narrow beam/high gain antenna.
Gain tolerance of +/- 1dB
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1850-1990
65
7
2
18.0 (15.9)
>14
35 (typical 40)
Vertical
< 1.5:1
>150
50
400
Direct Ground
7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP196516-CT2
Rev: A1
-9-
AP196516-CT2
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP196516-CT2
Rev: A1
- 10 -
AP866513-CT0
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33 horizontal beamwidth for highway
coverage.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
18
0
14.5 (12.4)
>30 (Typ.35)
Vertical
< 1.5:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP866513-CT0
Rev: A1
- 11 -
AP866513-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP866513-CT0
Rev: A1
- 12 -
AP866516-CT0
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33 horizontal beamwidth for highway
coverage.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
9
0
17 (14.9)
>30 (Typ.35)
Vertical
< 1.5:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP866516-CT0
Rev: A1
- 13 -
AP866516-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP866516-CT0
Rev: A1
- 14 -
AP906516-CT0
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Improved capacity network by reducing co-site hand-off.
Distance between antennas can be reduced thus minimizing visual impact.
Broad bandwidth allows installation on all cellular standards.
2 side-by-side coupled antennas will lead to a 33 horizontal beamwidth for highway
coverage.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
872-960
65
8.5
0
17.0 (14.9)
17.5 (15.4)
>30 (Typ.35)
Vertical
< 1.5:1, < 1.3:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP906516-CT0
Rev: A1
- 15 -
AP906516-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP906516-CT0
Rev: A1
- 16 -
AP909011-CT0
Product Description
Well adapted for dense urban network
Features/Benefits
Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
Allows quasi-omni solution in multipath propagation configuration.
Distance between antennas can be reduced thus minimizing visualimpact.
Broad bandwidth allows installation on all cellular standards.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Ensures very homogeneous coverage in 3-sector configuration.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
872-960
90
17.5
0
13.3 (11.2)
13.5 (11.4)
>25
Vertical
< 1.5:1, < 1.3:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP909011-CT0
Rev: A1
- 17 -
AP909011-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP909011-CT0
Rev: A1
- 18 -
AP909014-CT0
Product Description
Dense urban network optimization.
Features/Benefits
Power spread on horizon can be tuned easily because of vertical pattern slope.
Accurate C/I level tuning by application of low mechanical tilt will have low visual impact.
Broad bandwidth allows installation on all cellular standards.
Easy to install due to 2 mechanical clamps independent of antenna size.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
872-960
90
8.5
0
15.5 (13.4)
16 (13.9)
>25
Vertical
< 1.5:1, < 1.3:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP909014-CT0
Rev: A1
- 19 -
AP909014-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP909014-CT0
Rev: A1
- 20 -
AP909016-CT0
Product Description
Rural coverage optimization
Features/Benefits
Optimized gain in order to improve power budget.
Pairs of 2 back array allow homogeneous coverage and use of only 3 BTS site.
Easy to install due to only 2 mechanical clamps independent of antenna size.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
872-960
90
5.5
0
17.3 (15.2)
>25
Vertical
< 1.5:1, < 1.3:1
>150
50
1000
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
AP909016-CT0
Rev: A1
- 21 -
AP909016-CT0
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
AP909016-CT0
Rev: A1
- 22 -
APL866513-42T0
Maximizer Log Periodic Antenna, 806-894, 65deg, 15.1dBi, 1.2m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
15
0
15.1 (13)
>20
>20
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-3
APL866513-42T0
Rev: A1
- 23 -
APL866513-42T0
Maximizer Log Periodic Antenna, 806-894, 65deg, 15.1dBi, 1.2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL866513-42T0
Rev: A1
- 24 -
APL866513-42T6
Maximizer Log Periodic Antenna, 806-894, 65deg, 15.1dBi, 1.2m, FET, 6deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
15
6
15.1 (13)
>20
>20
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-3
APL866513-42T6
Rev: A1
- 25 -
APL866513-42T6
Maximizer Log Periodic Antenna, 806-894, 65deg, 15.1dBi, 1.2m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL866513-42T6
Rev: A1
- 26 -
APL866516-42T0
Maximizer Log Periodic Antenna, 806-894, 65deg, 18.1dBi, 2.4m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
8
0
18.1 (16)
>20
>20
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APL866516-42T0
Rev: A1
- 27 -
APL866516-42T0
Maximizer Log Periodic Antenna, 806-894, 65deg, 18.1dBi, 2.4m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL866516-42T0
Rev: A1
- 28 -
APL866516-42T4
Maximizer Log Periodic Antenna, 806-894, 65deg, 18.1dBi, 2.4m, FET, 4deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
65
8
4
18.1 (16)
>20
>20
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APL866516-42T4
Rev: A1
- 29 -
APL866516-42T4
Maximizer Log Periodic Antenna, 806-894, 65deg, 18.1dBi, 2.4m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL866516-42T4
Rev: A1
- 30 -
APL868010-42T0
Maximizer Log Periodic Antenna, 806-894, 80deg, 12.1dBi, 0.6m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
80
30
0
12.1 (10)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM20-2
APL868010-42T0
Rev: A1
- 31 -
APL868010-42T0
Maximizer Log Periodic Antenna, 806-894, 80deg, 12.1dBi, 0.6m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL868010-42T0
Rev: A1
- 32 -
APL868013-42T0
Maximizer Log Periodic Antenna, 806-894, 80deg, 14.1dBi, 1.2m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
80
15
0
14.1 (12)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-3
APL868013-42T0
Rev: A1
- 33 -
APL868013-42T0
Maximizer Log Periodic Antenna, 806-894, 80deg, 14.1dBi, 1.2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL868013-42T0
Rev: A1
- 34 -
APL868013-42T4
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
80
15
4
14.1 (12)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-3
APL868013-42T4
Rev: A1
- 35 -
APL868013-42T4
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL868013-42T4
Rev: A1
- 36 -
APL869009-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 11.1dBi, 0.6m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patented design to achieve a frontto-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available to
cover ESMR, AMPS, PCS and DCS frequency ranges. They use RFSs patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths. Patent number
6,133,889.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-894
90
30
0
11.1 (9)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM20-2
APL869009-42T0
Rev: A1
- 37 -
APL869009-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 11.1dBi, 0.6m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL869009-42T0
Rev: A1
- 38 -
APL869012-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 14.1dBi, 1.2m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patent pending design to achieve a
front-to-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available
to cover ESMR, AMPS, PCS and DCS frequency ranges. They use Celwave's patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
806-894
90
15
0
14.1 (12)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-3
APL869012-42T0
Rev: A1
- 39 -
APL869012-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 14.1dBi, 1.2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL869012-42T0
Rev: A1
- 40 -
APL869014-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 16.1dBi, 2.3m, FET, 0deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patent pending design to achieve a
front-to-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available
to cover ESMR, AMPS, PCS and DCS frequency ranges. They use Celwave's patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
806-894
90
7.8
0
16.1 (14)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-6
APL869014-42T0
Rev: A1
- 41 -
APL869014-42T0
Maximizer Log Periodic Antenna, 806-894, 90deg, 16.1dBi, 2.3m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL869014-42T0
Rev: A1
- 42 -
APL869014-42T6
Maximizer Log Periodic Antenna, 806-894, 90deg, 16.1dBi, 2.3m, FET, 6deg
Product Description
The Maximizer series is a log periodic dipole array which uses a patent pending design to achieve a
front-to-back ratio of 45 dB, the highest front-to-back ratio in the industry. Maximizers are available
to cover ESMR, AMPS, PCS and DCS frequency ranges. They use Celwave's patented monolithic
technology, which eliminates cable and soldered joints to reduce the possibility of inter-modulation
products. This technology assures high reliability and excellent repeatability of electrical
characteristics. The cellular Maximizers are available in 65, 80 and 90 horizontal beamwidths and
the PCS/DCS Maximizers are available in 65 and 90 horizontal beamwidths.
Features/Benefits
45 dB front-to-back ratio reduces co-channel interference. Monolithic construction reduces
IM. No solder joints, high reliability. Surface treated components prevent galvanic
corrosion. UV stabilized radome assures long life without radome deterioration due to UV
exposure.
Technical Specifications
Electrical Specifications
806-894
90
7.8
6
16.1 (14)
45
Vertical
< 1.5:1
< -100
50
500
Direct Ground
7-16 DIN Female/Back
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
APM21-6
APL869014-42T6
Rev: A1
- 43 -
APL869014-42T6
Maximizer Log Periodic Antenna, 806-894, 90deg, 16.1dBi, 2.3m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APL869014-42T6
Rev: A1
- 44 -
APV86-906516-C
Optimizer Vertically Polarized Antenna, 790-960, 65deg, 17.5dBi, 2.6m, VET, 0-10deg
Product Description
An ideal antenna for LTE800, CDMA and GSM900 networks where high gain is required.
Features/Benefits
One single vertical polarized antenna
Quick and easy to adjust
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
Upgradable to remote electrical tilt
Optimized suppression lobes (Typically >20dB) allows strong mechanical tilt
Broad frequency range including LTE800
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
73
8.5
806-894
69
8
0-10
16.8 (14.7)
> 18
> 18
> 26
Vertical
<1.5:1 (T2 to T10: <1.3 Typ)
< -150
50
500
Direct Ground
(1) 7-16 Long Neck Female/Bottom
16.6 (14.5)
880-960
65
7.3
17.5 (15.4)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APV86-906516-C
Rev: C
- 45 -
APV86-906516-C
Optimizer Vertically Polarized Antenna, 790-960, 65deg, 17.5dBi, 2.6m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
Available Configurations
APV86-906516-C No ACU included Weight 20.4 kg, 45 lb
APV86-906516-C-A20 (1) Pre-commissioned ACU included Weight 21 kg, 46.3 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APV86-906516-C
Rev: C
- 46 -
APX13GV-15DV-C
Optimizer Dual-Band Dual Polarized, 870-1880, 65deg, 13.9/16.5dBi, 1.5m, VET, 0-10deg
Product Description
Dual band, cross polarized GSM/DCS panel antenna with independent variable electrical tilt for high
traffic areas where capacity enhancement can be provided by use of dual 900/1800MHz services.
Features/Benefits
Independent control of electrical downtilt for 900 and 1800MHz bands.
High performance dual band combiner/splitter for equipment hut available.
Easy swapout of GSM panel for dual band panel.
Low profile for low visual impact.
High upper sidelobe suppression.
Quick and easy to adjust.
Continuously variable downtilt provides enhanced precision in controlling intercell
interference.
Radome can be painted to blend with environment.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
870-960
65
14.7
1710-1880
65
7.0
0-10
13.9 (11.8)
>20
16.5 (14.4)
>18 (typically >20)
>16@T0 >15@T5 >14@T10
>25
Dual pol +/-45
< 1.5:1
>30
>30
>150
50
250
200
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX13GV-15DV-C
Rev: A1
- 47 -
APX13GV-15DV-C
Optimizer Dual-Band Dual Polarized, 870-1880, 65deg, 13.9/16.5dBi, 1.5m, VET, 0-10deg
Horizontal Pattern
Vertical Pattern
Notes
For additional mounting information please click "External Document Link" below.
Requires optional accessory 30825.000 (Interface Plate for Antenna Control Unit) for remote tilt operation. Please contact sales for details.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX13GV-15DV-C
Rev: A1
- 48 -
APX13GV-15DWVB-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 14.4/17.0/17.0dBi, 1.3m, VET, 0-10/2-10deg
Product Description
Dual band, cross polarized GSM/DCS-UMTS panel antenna with independent variable electrical tilt
for high traffic areas where capacity enhancement can be provided by use of dual 900/18002170MHz services.
Features/Benefits
Independent control of electrical downtilt for 900 and 1800-2170MHz bands.
Easy swapout of GSM panel for dual band panel & upgrade to UMTS.
Low profile for low visual impact.
High upper sidelobe suppression.
Quick and easy to adjust.
Continuously variable downtilt provides enhanced precision in controlling intercell
interference.
High front-to-back ratio.
Radome can be painted to blend with environment.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
870-960
65
14.7
0-10
14.4 (12.3)
500
1710-1900
1900-2170
64
60
7
6.8
2-10
2-10
17.0 (14.9)
17.0 (14.9)
>17 (typically >20)
>16 (typically >20)
>25
Dual pol +/-45
< 1.5:1
>30
GSM - UMTS >27
GSM - UMTS >30
>150, >150, N/A
N/A, N/A, >170
50
300
300
Direct Ground
(4) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX13GV-15DWVB-C
Rev: A1
- 49 -
APX13GV-15DWVB-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 14.4/17.0/17.0dBi, 1.3m, VET, 0-10/2-10deg
Vertical Pattern-GSM
Vertical Pattern-DCS
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX13GV-15DWVB-C
Rev: A1
- 50 -
APX15G0-16D2-C
Optimizer Dual-Band Dual Polarized, 870-1880, 65deg, 15.8/17.6dBi, 2m, FET, 0/2deg
Product Description
Dual Band site upgrade for high traffic areas.
Features/Benefits
Easy replacement of existing antennas.
Low profile for low visual impact.
High isolation between bands (>30dB).
No disturbances on horizontal pattern of each band.
Optimized suppression of sidelobes allows strong mechanical downtilt.
Effective polarization diversity assured by high cross polar discrimination.
Internal diplexer available.
Camouflage solution on demand to adapt to environment.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
870-960
65
9
0
15.8 (13.7)
>18
1710-1880
65
5
2
17.6 (15.5)
>17 (typ 20)
> 18
>30
Dual pol +/-45
< 1.5:1
>30
>30
>150
50
500
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX15G0-16D2-C
Rev: A1
- 51 -
APX15G0-16D2-C
Optimizer Dual-Band Dual Polarized, 870-1880, 65deg, 15.8/17.6dBi, 2m, FET, 0/2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX15G0-16D2-C
Rev: A1
- 52 -
APX15G0-16DW2B-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 16/17.8/17.8dBi, 2m, FET, 0/2deg
Product Description
Dual Band site upgrade for high traffic areas.
Features/Benefits
Easy replacement of existing antennas.
Low profile for low visual impact.
High isolation between bands (>30dB).
No disturbances on horizontal pattern of each band.
Optimized suppression of sidelobes allows strong mechanical downtilt.
Effective polarization diversity assured by high cross polar discrimination.
Internal diplexer available.
Camouflage solution on demand to adapt to environment.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
870-960
65
9
0
16 (13.9)
>18
1710-1900
65
5
2
17.8 (15.7)
>18 (typ 20)
> 18
>30
Dual pol +/-45
< 1.5:1
>30
>30
>150, >150, N/A
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
500
1900-2170
62
5
2
17.8 (15.7)
>18 (typ 20)
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX15G0-16DW2B-C
Rev: A1
- 53 -
APX15G0-16DW2B-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 16/17.8/17.8dBi, 2m, FET, 0/2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX15G0-16DW2B-C
Rev: A1
- 54 -
APX15GV-15DWV-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 15.5/17.7/17.7dBi, 2.2m, VET, 0-10/2-10deg
Product Description
Dual band, cross polarized GSM/DCS-UMTS panel antenna with independent variable electrical tilt
for high traffic areas where capacity enhancement can be provided by use of dual 900/18002170MHz services.
Features/Benefits
Independent control of electrical downtilt for 900 and 1800-2170MHz bands.
Easy swapout of GSM panel for dual band panel & upgrade to UMTS.
Low profile for low visual impact.
High upper sidelobe suppression.
Quick and easy to adjust.
Continuously variable downtilt provides enhanced precision in controlling intercell
interference.
High front-to-back ratio.
Radome can be painted to blend with environment.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
870-960
65
9
0-10
15.5 (13.4)
>18
1710-1880
66
5
2-10
17.7 (15.6)
>18
>16 (typically >20)
>25
Dual pol +/-45
< 1.5:1
>30
>30
>150, >150, N/A
N/A, N/A, >170
50
200
Direct Ground
(2) 7-16 DIN Female/Bottom
250
1900-2170
62
5
2-10
17.7 (15.6)
>17(typically >20)
200
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX15GV-15DWV-C
Rev: A1
- 55 -
APX15GV-15DWV-C
Optimizer Dual-Band Dual Polarized, 870-2170, 65deg, 15.5/17.7/17.7dBi, 2.2m, VET, 0-10/2-10deg
Vertical Pattern-GSM
Vertical Pattern-DCS
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX15GV-15DWV-C
Rev: A1
- 56 -
APX16DWV-16DWVS-E-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18dBi, 1.4m, VET, 0-10deg RET
Product Description
A combination of two X-Polarized antennas in a single radome, this pair of variable tilt antennas
provides exceptional suppression of all upper sidelobes at all downtilt angles. It also features a wide
downtilt range. This antenna is optimized for performance across the entire frequency band (17102200 MHz). The antenna comes pre-connected with two antenna control units (ACU).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Gain tracking difference between AWS UL (1710-1755 MHz) and DL (2110-2155 MHz) <1dB.
Two X-Polarised panels in a single radome.
Azimuth horizontal beamwidth difference <4deg between AWS UL (1710-1755 MHz) and DL
(2110-2155 MHz).
Low profile for low visual impact.
Dual polarization; Broadband design.
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Technical Specifications
Electrical Specifications
1710-2200
65
5.9 to 7.7
0-10
18 (15.9)
> 18 (typically > 20)
> 18 all (typically > 20)
>26 (typically 28)
Dual pol +/-45
< 1.5:1
> 30
> 150 (155 Typical)
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2 + APM40-E2
60-120 (2.36-4.72)
3.5 (7.7)
APX16DWV-16DWVS-E-A20
Rev: D
- 57 -
APX16DWV-16DWVS-E-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18dBi, 1.4m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX16DWV-16DWVS-E-A20
Rev: D
- 58 -
APX16DWV-16DWVT-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.4m, VET, 4-14deg
Product Description
A combination of two X-Polarized antennas in a single radome, this pair of variable tilt antennas
provides exceptional suppression of all upper sidelobes at all downtilt angles. It also features a wide
downtilt range. This antenna is optimized for performance across the entire frequency band (17102200 MHz).
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 4-14 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Optional remote tilt can be retrofitted
Two X-Polarised panels in a single radome
Dual polarization
Low profile for low visual impact
Broadband design
High front to back ratio
Radome can be painted to blend with the environment
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
64
7.5
17.7 (15.6)
>18 (Typ >20)
>26 (Typ >30)
1850-1990
65
7.0
4-14
17.7 (15.6)
>20
>18 (Typ >20)
>26 (Typ >30)
Dual pol +/-45
< 1.4:1
>30
>35
>150, >150, N/A
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
1900-2200
65
6.6
18 (15.9)
>17 (Typ >20)
>24 (Typ >30)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX16DWV-16DWVT-C
Rev: A1
- 59 -
APX16DWV-16DWVT-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.4m, VET, 4-14deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX16DWV-16DWVT-C
Rev: A1
- 60 -
APX17DWV-17DWVS-E-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 19dBi, 1.9m, VET, 0-10deg RET
Product Description
A combination of two X-Polarized antennas in a single radome, this pair of variable tilt antennas
provides exceptional suppression of all upper sidelobes at all downtilt angles. It also features null fill
and a wide downtilt range with optional remote tilt. This antenna is optimized for performance
across the entire frequency band (1710-2200 MHz). The antenna comes pre-connected two
antenna control units (ACU).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Gain difference between UL and DL <1dB.
Two X-Polarised panels in a single radome.
Azimuth horizontal beamwidth difference <5deg between UL and DL (1710-1755 & 21102155).
Low profile for low visual impact.
Dual polarization; Broadband design.
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units
Technical Specifications
Electrical Specifications
1710-2200
65 5 (64.8 average across band)
4.3 to 5.6
0-10
19 (16.9)
Typically > 20
> 25 (Typically 28)
Dual pol +/-45
< 1.5:1
> 30
> 150 (155 Typical)
> 170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2 + APM40-E2
60-120 (2.36-4.72)
3.5 (7.7)
APX17DWV-17DWVS-E-A20
Rev: C
- 61 -
APX17DWV-17DWVS-E-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 19dBi, 1.9m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX17DWV-17DWVS-E-A20
Rev: C
- 62 -
APX18-206513-CT0
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 14.7/14.9dBi, 0.6m, FET, 0deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Reduction of site dimensions will ease site acceptance.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Due to short length it is fully adapted to urban wall mounting situation.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
65
13.5
1900-2170
63
12.5
0
14.7 (12.6)
14.9 (12.8)
>28
Dual pol +/-45
< 1.5:1
>30
>150, N/A
N/A, >170
50
80
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206513-CT0
Rev: B
- 63 -
APX18-206513-CT0
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 14.7/14.9dBi, 0.6m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206513-CT0
Rev: B
- 64 -
APX18-206513-CT6
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 13.8dBi, 0.6m, FET, 6deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Reduction of site dimensions will ease site acceptance.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Due to short length it is fully adapted to urban wall mounting situation.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
65
13.5
1900-2170
63
12.5
6
13.8 (11.7)
>28
Dual pol +/-45
< 1.5:1
>30
>150, N/A
N/A, >170
50
80
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206513-CT6
Rev: B
- 65 -
APX18-206513-CT6
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 13.8dBi, 0.6m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206513-CT6
Rev: B
- 66 -
APX18-206516L-CT0
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.6/18.6dBi, 1.3m, FET, 0deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design operating from GSM1800 up to 3G-UMTS.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
69
6.9
1900-2170
64
6
0
17.6 (15.5)
18.6 (16.5)
>20
>29
30
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206516L-CT0
Rev: A1
- 67 -
APX18-206516L-CT0
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.6/18.6dBi, 1.3m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206516L-CT0
Rev: A1
- 68 -
APX18-206516L-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.5/18.0dBi, 1.3m, FET, 2deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design operating from GSM1800 up to 3G-UMTS.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
67
7
1900-2170
62
6.5
2
17.5 (15.4)
18 (15.9)
>20
>27
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206516L-CT2
Rev: A1
- 69 -
APX18-206516L-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.5/18.0dBi, 1.3m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206516L-CT2
Rev: A1
- 70 -
APX18-206516L-CT6
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.5/18.0dBi, 1.3m, FET, 6deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design operating from GSM1800 up to 3G-UMTS.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
67
7
1900-2170
62
6.5
6
17.5 (15.4)
>22
18 (15.9)
>18 (typ 20)
>27
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206516L-CT6
Rev: A1
- 71 -
APX18-206516L-CT6
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 17.5/18.0dBi, 1.3m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206516L-CT6
Rev: A1
- 72 -
APX18-206517-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 18.5/19.0dBi, 1.8m, FET, 2deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design operating from GSM1800 up to 3G-UMTS.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
5
1900-2170
64
4.5
2
18.5 (16.4)
>20
>30
19 (16.9)
>18 (typ 20)
>25
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206517-CT2
Rev: A1
- 73 -
APX18-206517-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 18.5/19.0dBi, 1.8m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206517-CT2
Rev: A1
- 74 -
APX18-206517-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 18.5/19.0dBi, 1.8m, FET, 5deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design operating from GSM1800 up to 3G-UMTS.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
5
1900-2170
64
4.5
5
18.5 (16.4)
>20
>30
19 (16.9)
>18 (typ 20)
>25
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-206517-CT5
Rev: A1
- 75 -
APX18-206517-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 18.5/19.0dBi, 1.8m, FET, 5deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-206517-CT5
Rev: A1
- 76 -
APX18-209014-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 15.9dBi, 1.2m, FET, 2deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
90
7.5
2
15.4 (13.3)
15.9 (13.8)
>20
>28
Dual pol +/-45
< 1.4:1
>30
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-209014-CT2
Rev: A1
- 77 -
APX18-209014-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 15.9dBi, 1.2m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-209014-CT2
Rev: A1
- 78 -
APX18-209014-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 15.8dBi, 1.2m, FET, 5deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
90
7.5
5
15.4 (13.3)
>20 (typ 23)
15.8 (13.7)
>18 (typ 22)
>28
Dual pol +/-45
< 1.4:1
>35
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-209014-CT5
Rev: A1
- 79 -
APX18-209014-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 15.8dBi, 1.2m, FET, 5deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-209014-CT5
Rev: A1
- 80 -
APX18-209015-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.7dBi, 1.8m, FET, 2deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
90
4.5
2
17.5 (15.4)
17.7 (15.6)
>18 (typ 20)
>30
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-209015-CT2
Rev: A1
- 81 -
APX18-209015-CT2
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.7dBi, 1.8m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-209015-CT2
Rev: A1
- 82 -
APX18-209015-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.5dBi, 1.8m, FET, 5deg
Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
Very broadband design.
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Possible camouflage solution on demand.
Wind load thrust highly reduced.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Optimized suppression of side lobes allows strong mechanical tilt.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
90
4.5
5
17.4 (15.3)
17.5 (15.4)
>18 (typ 20)
>30
Dual pol +/-45
< 1.4:1
>30 (typ 35)
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX18-209015-CT5
Rev: A1
- 83 -
APX18-209015-CT5
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.5dBi, 1.8m, FET, 5deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX18-209015-CT5
Rev: A1
- 84 -
APX75-864014-CT0
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
0
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT0
Rev: A1
- 85 -
APX75-864014-CT0
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT0
Rev: A1
- 86 -
APX75-864014-CT10
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
10
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT10
Rev: A1
- 87 -
APX75-864014-CT10
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT10
Rev: A1
- 88 -
APX75-864014-CT12
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 12deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
12
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT12
Rev: A1
- 89 -
APX75-864014-CT12
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT12
Rev: A1
- 90 -
APX75-864014-CT14
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 14deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
14
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT14
Rev: A1
- 91 -
APX75-864014-CT14
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 14deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT14
Rev: A1
- 92 -
APX75-864014-CT2
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
2
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT2
Rev: A1
- 93 -
APX75-864014-CT2
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT2
Rev: A1
- 94 -
APX75-864014-CT4
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
4
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT4
Rev: A1
- 95 -
APX75-864014-CT4
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT4
Rev: A1
- 96 -
APX75-864014-CT6
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
6
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT6
Rev: A1
- 97 -
APX75-864014-CT6
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT6
Rev: A1
- 98 -
APX75-864014-CT8
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
15-19
8
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-864014-CT8
Rev: A1
- 99 -
APX75-864014-CT8
Optimizer Dual Polarized Antenna, 698-896, 40deg, 16.1dBi, 1.4m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864014-CT8
Rev: A1
- 100 -
APX75-864016-CT0
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
0
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT0
Rev: A1
- 101 -
APX75-864016-CT0
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT0
Rev: A1
- 102 -
APX75-864016-CT10
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
10
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT10
Rev: A1
- 103 -
APX75-864016-CT10
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT10
Rev: A1
- 104 -
APX75-864016-CT2
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
2
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT2
Rev: A1
- 105 -
APX75-864016-CT2
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT2
Rev: A1
- 106 -
APX75-864016-CT4
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
4
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT4
Rev: A1
- 107 -
APX75-864016-CT4
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT4
Rev: A1
- 108 -
APX75-864016-CT6
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
6
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT6
Rev: A1
- 109 -
APX75-864016-CT6
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT6
Rev: A1
- 110 -
APX75-864016-CT8
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
40 +/-5
11-13
8
18.1 (16)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3HD
60-120 (2.36-4.72)
5.4 (11.9)
APX75-864016-CT8
Rev: A1
- 111 -
APX75-864016-CT8
Optimizer Dual Polarized Antenna, 698-896, 40deg, 18.1dBi, 1.9m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-864016-CT8
Rev: A1
- 112 -
APX75-866512-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
0
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT0
Rev: A1
- 113 -
APX75-866512-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT0
Rev: A1
- 114 -
APX75-866512-CT10
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
10
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT10
Rev: A1
- 115 -
APX75-866512-CT10
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT10
Rev: A1
- 116 -
APX75-866512-CT12
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 12deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
12
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT12
Rev: A1
- 117 -
APX75-866512-CT12
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT12
Rev: A1
- 118 -
APX75-866512-CT14
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 14deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
14
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT14
Rev: A1
- 119 -
APX75-866512-CT14
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 14deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT14
Rev: A1
- 120 -
APX75-866512-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
2
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT2
Rev: A1
- 121 -
APX75-866512-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT2
Rev: A1
- 122 -
APX75-866512-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
4
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT4
Rev: A1
- 123 -
APX75-866512-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT4
Rev: A1
- 124 -
APX75-866512-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
6
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT6
Rev: A1
- 125 -
APX75-866512-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT6
Rev: A1
- 126 -
APX75-866512-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
15-19
8
14.1 (12)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-866512-CT8
Rev: A1
- 127 -
APX75-866512-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 14.1dBi, 1.3m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866512-CT8
Rev: A1
- 128 -
APX75-866514-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
0
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT0
Rev: A1
- 129 -
APX75-866514-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT0
Rev: A1
- 130 -
APX75-866514-CT10
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
10
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT10
Rev: A1
- 131 -
APX75-866514-CT10
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT10
Rev: A1
- 132 -
APX75-866514-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
2
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT2
Rev: A1
- 133 -
APX75-866514-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT2
Rev: A1
- 134 -
APX75-866514-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
4
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT4
Rev: A1
- 135 -
APX75-866514-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT4
Rev: A1
- 136 -
APX75-866514-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
6
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT6
Rev: A1
- 137 -
APX75-866514-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT6
Rev: A1
- 138 -
APX75-866514-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
9-12
8
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866514-CT8
Rev: A1
- 139 -
APX75-866514-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.1dBi, 2m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866514-CT8
Rev: A1
- 140 -
APX75-866515-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
8-10
0
16.6 (14.5)
>18
>18
>30
Slant +/-45 degrees
1.45:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866515-CT0
Rev: A1
- 141 -
APX75-866515-CT0
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866515-CT0
Rev: A1
- 142 -
APX75-866515-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
8-10
2
16.6 (14.5)
>18
>18
>30
Slant +/-45 degrees
1.45:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866515-CT2
Rev: A1
- 143 -
APX75-866515-CT2
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866515-CT2
Rev: A1
- 144 -
APX75-866515-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
8-10
4
16.6 (14.5)
>18
>18
>30
Slant +/-45 degrees
1.45:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866515-CT4
Rev: A1
- 145 -
APX75-866515-CT4
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866515-CT4
Rev: A1
- 146 -
APX75-866515-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
8-10
6
16.6 (14.5)
>18
>18
>30
Slant +/-45 degrees
1.45:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866515-CT6
Rev: A1
- 147 -
APX75-866515-CT6
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBi, 2.4m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866515-CT6
Rev: A1
- 148 -
APX75-866515-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBidBi, 2.4m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
66 +/-5
8-10
8
16.6 (14.5)
>18
>18
>30
Slant +/-45 degrees
1.45:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-866515-CT8
Rev: A1
- 149 -
APX75-866515-CT8
Optimizer Dual Polarized Antenna, 698-896, 65deg, 16.6dBidBi, 2.4m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-866515-CT8
Rev: A1
- 150 -
APX75-868011-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
0
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT0
Rev: A1
- 151 -
APX75-868011-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT0
Rev: A1
- 152 -
APX75-868011-CT10
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
10
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT10
Rev: A1
- 153 -
APX75-868011-CT10
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT10
Rev: A1
- 154 -
APX75-868011-CT12
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 12deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
12
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT12
Rev: A1
- 155 -
APX75-868011-CT12
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT12
Rev: A1
- 156 -
APX75-868011-CT14
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 14deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
14
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT14
Rev: A1
- 157 -
APX75-868011-CT14
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 14deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT14
Rev: A1
- 158 -
APX75-868011-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
2
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT2
Rev: A1
- 159 -
APX75-868011-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT2
Rev: A1
- 160 -
APX75-868011-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
4
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT4
Rev: A1
- 161 -
APX75-868011-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT4
Rev: A1
- 162 -
APX75-868011-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
6
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT6
Rev: A1
- 163 -
APX75-868011-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT6
Rev: A1
- 164 -
APX75-868011-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
15-19
8
13.1 (11)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX75-868011-CT8
Rev: A1
- 165 -
APX75-868011-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 13.1dBi, 1.3m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868011-CT8
Rev: A1
- 166 -
APX75-868013-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
0
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT0
Rev: A1
- 167 -
APX75-868013-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT0
Rev: A1
- 168 -
APX75-868013-CT10
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 10deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
10
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT10
Rev: A1
- 169 -
APX75-868013-CT10
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT10
Rev: A1
- 170 -
APX75-868013-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
2
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT2
Rev: A1
- 171 -
APX75-868013-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT2
Rev: A1
- 172 -
APX75-868013-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
4
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT4
Rev: A1
- 173 -
APX75-868013-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT4
Rev: A1
- 174 -
APX75-868013-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
6
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT6
Rev: A1
- 175 -
APX75-868013-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT6
Rev: A1
- 176 -
APX75-868013-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
9-12
8
15.1 (13)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868013-CT8
Rev: A1
- 177 -
APX75-868013-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 15.1dBi, 2m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868013-CT8
Rev: A1
- 178 -
APX75-868014-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 0deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
8-10
0
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868014-CT0
Rev: A1
- 179 -
APX75-868014-CT0
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868014-CT0
Rev: A1
- 180 -
APX75-868014-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 2deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
8-10
2
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868014-CT2
Rev: A1
- 181 -
APX75-868014-CT2
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 2deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868014-CT2
Rev: A1
- 182 -
APX75-868014-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 4deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
8-10
4
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868014-CT4
Rev: A1
- 183 -
APX75-868014-CT4
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868014-CT4
Rev: A1
- 184 -
APX75-868014-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 6deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
8-10
6
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868014-CT6
Rev: A1
- 185 -
APX75-868014-CT6
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868014-CT6
Rev: A1
- 186 -
APX75-868014-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 8deg
Product Description
Wideband antenna for dense networks where site aspect is essential.
Features/Benefits
Wideband performance 698-896 MHz
High sidelobe suppression
Null fill
Dual polarization
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-896
80 +/-5
8-10
8
16.1 (14)
>18
>18
>30
Slant +/-45 degrees
1.40:1
>30
>150
50
500
Chassis Ground
(2) 7-16 Long Neck DIN Female/Bottom
Mechanical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-3
60-120 (2.36-4.72)
5.4 (11.9)
APX75-868014-CT8
Rev: A1
- 187 -
APX75-868014-CT8
Optimizer Dual Polarized Antenna, 698-896, 80deg, 16.1dBi, 2.4m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX75-868014-CT8
Rev: A1
- 188 -
APX86-906513L-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 15.0dBi, 1.3m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
67
16
870-960
65
15
0
14.5 (12.4)
15.0 (13.9)
>18 all (typically >20)
>25
Dual pol +/-45
< 1.5:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906513L-CT0
Rev: A1
- 189 -
APX86-906513L-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 15.0dBi, 1.3m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906513L-CT0
Rev: A1
- 190 -
APX86-906513L-CT12
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 14.7dBi, 1.3m, FET, 12deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
69
16
870-960
65
15
12
14.3 (12.2)
14.7 (12.6)
>18 all (typically >20)
>27
Dual pol +/-45
< 1.3:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906513L-CT12
Rev: A1
- 191 -
APX86-906513L-CT12
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 14.7dBi, 1.3m, FET, 12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906513L-CT12
Rev: A1
- 192 -
APX86-906513L-CT4
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 15.0dBi, 1.3m, FET, 4deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
870-960
65
16
15
4
14.3 (12.2)
15.0 (13.9)
>18 all (typically >20)
>30
Dual pol +/-45
< 1.35:1, < 1.3:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906513L-CT4
Rev: A1
- 193 -
APX86-906513L-CT4
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 15.0dBi, 1.3m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906513L-CT4
Rev: A1
- 194 -
APX86-906513L-CT8
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 14.8dBi, 1.3m, FET, 8deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
870-960
65
16
15.5
8
14.3 (12.2)
14.8 (12.7)
>18 all (typically >20)
>30
Dual pol +/-45
< 1.3:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906513L-CT8
Rev: A1
- 195 -
APX86-906513L-CT8
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 14.8dBi, 1.3m, FET, 8deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906513L-CT8
Rev: A1
- 196 -
APX86-906515S-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 17dBi, 2m, FET, 0deg
Product Description
These antennas are manufactured with premium quality materials to ensure superior performance.
The microstripline feed system consists of monolithic aluminum construction allowing for minimal
welded joints to reduce the possibility of intermodulation problems, minimal power losses to
increase the antenna gain and perfect production reliability and repeatability. Each antenna features
a lightweight, one-piece panel construction for ease of installation, reducing handling cost. All
aluminum components are treated to minimize corrosion, assuring reliable operation in icing, salt air
and rain conditions. This antenna series is specifically designed to provide premium network
performance delivering cost efficient network capacity. Theyare ideal for CDMA applications and
GSM 900 network coverage and optimization.
Features/Benefits
Rugged construction For high reliability
Low PIM No system down-time, high call quality and reduced number of dropped calls
Dual Polarized Optimize RX performances
Excellent upper sidelobe suppression Allows strong mechanical tilt
High gain Provides better coverage
Wideband Frequency Performance Enables future growth and increases flexibility
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-896
65
10
870-960
65
9.5
0
16.6 (14.5)
17.0 (14.9)
>18
> 18
>28
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906515S-CT0
Rev: A1
- 197 -
APX86-906515S-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 17dBi, 2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906515S-CT0
Rev: A1
- 198 -
APX86-906515S-CT6
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 17dBi, 2m, FET, 6deg
Product Description
These antennas are manufactured with premium quality materials to ensure superior performance.
The microstripline feed system consists of monolithic aluminum construction allowing for minimal
welded joints to reduce the possibility of intermodulation problems, minimal power losses to
increase the antenna gain and perfect production reliability and repeatability. Each antenna features
a lightweight, one-piece panel construction for ease of installation, reducing handling cost. All
aluminum components are treated to minimize corrosion, assuring reliable operation in icing, salt air
and rain conditions. This antenna series is specifically designed to provide premium network
performance delivering cost efficient network capacity. Theyare ideal for CDMA applications and
GSM 900 network coverage and optimization.
Features/Benefits
Rugged construction For high reliability
Low PIM No system down-time, high call quality and reduced number of dropped calls
Dual Polarized Optimize RX performances
Excellent upper sidelobe suppression Allows strong mechanical tilt
High gain Provides better coverage
Wideband Frequency Performance Enables future growth and increases flexibility
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-896
65
10
870-960
65
9.5
6
16.6 (14.5)
17.0 (14.9)
>19
>28
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906515S-CT6
Rev: A1
- 199 -
APX86-906515S-CT6
Optimizer Cellular Dual Polarized Antenna, 806-960, 65deg, 17dBi, 2m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906515S-CT6
Rev: A1
- 200 -
APX86-906516S-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65/62deg, 18dBi, 2.7m, FET, 0deg
Product Description
These antennas are manufactured with premium quality materials to ensure superior performance.
The microstripline feed system consists of monolithic aluminum construction allowing for minimal
welded joints to reduce the possibility of intermodulation problems, minimal power losses to
increase the antenna gain and perfect production reliability and repeatability. Each antenna features
a lightweight, one-piece panel construction for ease of installation, reducing handling cost. All
aluminum components are treated to minimize corrosion, assuring reliable operation in icing, salt air
and rain conditions. This antenna series is specifically designed to provide premium network
performance delivering cost efficient network capacity. Theyare ideal for CDMA applications and
GSM 900 network coverage and optimization.
Features/Benefits
Rugged construction For high reliability
Low PIM No system down-time, high call quality and reduced number of dropped calls
Dual Polarized Optimize RX performances
Excellent upper sidelobe suppression Allows strong mechanical tilt
High gain Provides better coverage
Wideband Frequency Performance Enables future growth and increases flexibility
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-896
65
7.7
870-960
62
7.0
0
17.5 (15.4)
18.0 (15.9)
>18
> 16
>30
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906516S-CT0
Rev: A1
- 201 -
APX86-906516S-CT0
Optimizer Cellular Dual Polarized Antenna, 806-960, 65/62deg, 18dBi, 2.7m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906516S-CT0
Rev: A1
- 202 -
APX86-906516S-CT6
Optimizer Cellular Dual Polarized Antenna, 806-960, 65/63deg, 18dBi, 2.7m, FET, 6deg
Product Description
These antennas are manufactured with premium quality materials to ensure superior performance.
The microstripline feed system consists of monolithic aluminum construction allowing for minimal
welded joints to reduce the possibility of intermodulation problems, minimal power losses to
increase the antenna gain and perfect production reliability and repeatability. Each antenna features
a lightweight, one-piece panel construction for ease of installation, reducing handling cost. All
aluminum components are treated to minimize corrosion, assuring reliable operation in icing, salt air
and rain conditions. This antenna series is specifically designed to provide premium network
performance delivering cost efficient network capacity. Theyare ideal for CDMA applications and
GSM 900 network coverage and optimization.
Features/Benefits
Rugged construction For high reliability
Low PIM No system down-time, high call quality and reduced number of dropped calls
Dual Polarized Optimize RX performances
Excellent upper sidelobe suppression Allows strong mechanical tilt
High gain Provides better coverage
Wideband Frequency Performance Enables future growth and increases flexibility
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-896
65
7.5
870-960
63
7.0
6
17.5 (15.4)
18.0 (15.9)
>17
>30
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-906516S-CT6
Rev: A1
- 203 -
APX86-906516S-CT6
Optimizer Cellular Dual Polarized Antenna, 806-960, 65/63deg, 18dBi, 2.7m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-906516S-CT6
Rev: A1
- 204 -
APX86-909014L-CT0
Optimizer Dual Polarized Antenna, 806-960, 90deg, 15.2/15.5dBi, 2m, FET, 0deg
Product Description
Rural network optimization.
Features/Benefits
Reduction of site dimensions will ease site acceptance.
Infrastructure cost reduction (pylons, no. of feeders and antennas).
Slanted DP antenna allows air combining thus 3 dB saving in power budget.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
870-960
88
9
0
15.2 (13.1)
15.5 (13.4)
>18
>18 all (typically >20)
>22
>23
Dual pol +/-45
< 1.5:1
>30 (Typ.35)
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-909014L-CT0
Rev: A1
- 205 -
APX86-909014L-CT0
Optimizer Dual Polarized Antenna, 806-960, 90deg, 15.2/15.5dBi, 2m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-909014L-CT0
Rev: A1
- 206 -
APX86-909014L-CT6
Optimizer Dual Polarized Antenna, 806-960, 90deg, 15.2/15.6dBi, 2m, FET, 6deg
Product Description
Rural network optimization.
Features/Benefits
Reduction of site dimensions will ease site acceptance.
Infrastructure cost reduction (pylons, no. of feeders and antennas).
Slanted DP antenna allows air combining thus 3 dB saving in power budget.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
870-960
88
9
6
15.2 (13.1)
15.6 (13.5)
>18
>18 all (typically >20)
>22
>23
Dual pol +/-45
< 1.3:1
>30 (Typ.35)
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-909014L-CT6
Rev: A1
- 207 -
APX86-909014L-CT6
Optimizer Dual Polarized Antenna, 806-960, 90deg, 15.2/15.6dBi, 2m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-909014L-CT6
Rev: A1
- 208 -
APX86-909015-CT0
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.8dBi, 2.6m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
87
7.5
870-960
85
7
0
16.3 (14.2)
16.8 (14.7)
>18 (typically >20)
>18 all (typically >20)
>25
Dual pol +/-45
< 1.35:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-909015-CT0
Rev: A1
- 209 -
APX86-909015-CT0
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.8dBi, 2.6m, FET, 0deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-909015-CT0
Rev: A1
- 210 -
APX86-909015-CT4
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.7dBi, 2.6m, FET, 4deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
87
7.5
870-960
85
7
4
16.3 (14.2)
16.7 (14.6)
>18 (typically >20)
>18 all (typically >20)
>25
Dual pol +/-45
< 1.35:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-909015-CT4
Rev: A1
- 211 -
APX86-909015-CT4
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.7dBi, 2.6m, FET, 4deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-909015-CT4
Rev: A1
- 212 -
APX86-909015-CT6
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.5dBi, 2.6m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression.
Null fill.
Dual polarization.
High front-to-back ratio.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
806-870
87
7.5
870-960
85
7
6
16.0 (13.9)
16.5 (14.4)
> 17
> 17
>25
Dual pol +/-45
< 1.35:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APX86-909015-CT6
Rev: A1
- 213 -
APX86-909015-CT6
Optimizer Dual Polarized Antenna, 806-960, 90deg, 16.5dBi, 2.6m, FET, 6deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APX86-909015-CT6
Rev: A1
- 214 -
APXE13-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
0
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13-CT0
Rev: B
- 215 -
APXE13-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13-CT0
Rev: B
- 216 -
APXE13-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
3
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13-CT3
Rev: B
- 217 -
APXE13-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13-CT3
Rev: B
- 218 -
APXE13-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
6
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13-CT6
Rev: B
- 219 -
APXE13-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13-CT6
Rev: B
- 220 -
APXE13F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
0
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13F-CT0
Rev: B
- 221 -
APXE13F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13F-CT0
Rev: B
- 222 -
APXE13F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
3
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13F-CT3
Rev: B
- 223 -
APXE13F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13F-CT3
Rev: B
- 224 -
APXE13F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
67
16.2
806-870
67
16
6
14.5 (12.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14.3 (12.2)
870-960
65
15
15.0 (13.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE13F-CT6
Rev: B
- 225 -
APXE13F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE13F-CT6
Rev: B
- 226 -
APXE20-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
0
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20-CT0
Rev: B
- 227 -
APXE20-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20-CT0
Rev: B
- 228 -
APXE20-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
3
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20-CT3
Rev: B
- 229 -
APXE20-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20-CT3
Rev: B
- 230 -
APXE20-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
6
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20-CT6
Rev: B
- 231 -
APXE20-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20-CT6
Rev: B
- 232 -
APXE20F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
0
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20F-CT0
Rev: B
- 233 -
APXE20F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20F-CT0
Rev: B
- 234 -
APXE20F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
3
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20F-CT3
Rev: B
- 235 -
APXE20F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20F-CT3
Rev: B
- 236 -
APXE20F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
69
11
806-870
67
10
6
16.5 (14.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
15.5 (13.4)
870-960
65
9.5
17.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE20F-CT6
Rev: B
- 237 -
APXE20F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17dBi, 2.0m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE20F-CT6
Rev: B
- 238 -
APXE26-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
0
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE26-CT0
Rev: B
- 239 -
APXE26-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26-CT0
Rev: B
- 240 -
APXE26-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
3
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE26-CT3
Rev: B
- 241 -
APXE26-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26-CT3
Rev: B
- 242 -
APXE26-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
6
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE26-CT6
Rev: B
- 243 -
APXE26-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26-CT6
Rev: B
- 244 -
APXE26F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 0deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
0
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE26F-CT0
Rev: B
- 245 -
APXE26F-CT0
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 0deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26F-CT0
Rev: B
- 246 -
APXE26F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 3deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
3
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXE26F-CT3
Rev: B
- 247 -
APXE26F-CT3
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 3deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26F-CT3
Rev: B
- 248 -
APXE26F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 6deg
Product Description
Dense urban network optimization.
Features/Benefits
High sidelobe suppression
Null fill
Dual polarization
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-806
66
8.3
806-870
67
8
6
17.5 (15.4)
>18
>25
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.7 (14.6)
870-960
65
7
18.0 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
2.5(5.5)
APXE26F-CT6
Rev: B
- 249 -
APXE26F-CT6
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 18dBi, 2.6m, FET, 6deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXE26F-CT6
Rev: B
- 250 -
APXV18-203219-C
Optimizer, Cross Polarized Broadband Antenna, 1710-2200, 32deg, 21dBi, 1.3m, VET, 0-10deg
Product Description
This variable tilt antenna provides exceptional suppression of all upper sidelobes at all downtilt
angles. It is ideal for 3G, 4G, GSM, CDMA and Mobile TV networks where high gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
Excellent upper sidelobe suppression allows strong mechanical tilt
Optional remote tilt can be retrofitted
High front-to-back ratio
Rugged construction high reliability
Broadband design
Dual polarization
Low profile enables low visual impact
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
34
7.4
1850-1990
33
7
0-10
20.6 (18.5)
> 17 Typical
Typically 30
Dual pol +/-45
< 1.5:1
>30
153
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
20.4 (18.3)
1900-2200
33
6.5
21.1 (19.0)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-203219-C
Rev: B
- 251 -
APXV18-203219-C
Optimizer, Cross Polarized Broadband Antenna, 1710-2200, 32deg, 21dBi, 1.3m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-203219-C
Rev: B
- 252 -
APXV18-203219-C-A20
Optimizer Cross Polarized Broadband Antenna, 1710-2200, 32deg, 21dBi, 1.3m, VET, 0-10deg RET
Product Description
This variable tilt antenna provides exceptional suppression of all upper sidelobes at all downtilt
angles. It is ideal for 3G, 4G, GSM, CDMA and Mobile TV networks where high gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
Excellent upper sidelobe suppression allows strong mechanical tilt
Optional remote tilt can be retrofitted
High front-to-back ratio
Rugged construction high reliability
Broadband design
Dual polarization
Low profile enables low visual impact
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
34
7.4
1850-1990
33
7
0-10
20.6 (18.5)
> 17 Typical
Typically 30
Dual pol +/-45
< 1.5:1
>30
153
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
20.4 (18.3)
1900-2200
33
6.5
21.1 (19.0)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-203219-C-A20
Rev: D
- 253 -
APXV18-203219-C-A20
Optimizer Cross Polarized Broadband Antenna, 1710-2200, 32deg, 21dBi, 1.3m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-203219-C-A20
Rev: D
- 254 -
APXV18-206513-C
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.1dBi, 0.7m, VET, 2-12deg
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. This antenna is optimized for performance
across the entire frequency band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 2-12 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Optional remote tilt - can be retrofitted.
Broadband design.
Dual polarization.
Low profile for low visual impact.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
15.3
1900-2170
63
13.6
2-12
14.7 (12.6)
15.1 (13.0)
>18 (typically >20)
>18 all (Typically >20)
>28
Dual pol +/-45
< 1.4:1
>30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206513-C
Rev: B
- 255 -
APXV18-206513-C
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.1dBi, 0.7m, VET, 2-12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206513-C
Rev: B
- 256 -
APXV18-206513-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.1dBi, 0.7m, VET, 2-12deg RET
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. The antenna comes pre-connected with one
antenna control unit (ACU). This antenna is optimized for performance across the entire frequency
band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 2-12 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Broadband design.
Dual polarization.
Low profile for low visual impact.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
15.3
1900-2170
63
13.6
2-12
14.7 (12.6)
15.1 (13.0)
>18 (typically >20)
>18 all (Typically >20)
>28
Dual pol +/-45
< 1.4:1
>30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206513-C-A20
Rev: D
- 257 -
APXV18-206513-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.1dBi, 0.7m, VET, 2-12deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206513-C-A20
Rev: D
- 258 -
APXV18-206513T-C
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.4dBi, 0.7m, VET, 0-10deg
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. This antenna is optimized for performance
across the entire frequency band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Optional remote tilt - can be retrofitted.
Broadband design.
Dual polarization.
Low profile for low visual impact.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
15.3
1900-2170
63
13.6
0-10
14.9 (12.8)
15.4 (13.3)
>18
>18
>28
Dual pol +/-45
< 1.5:1
>30
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206513T-C
Rev: A1
- 259 -
APXV18-206513T-C
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.4dBi, 0.7m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206513T-C
Rev: A1
- 260 -
APXV18-206513T-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.4dBi, 0.7m, VET, 0-10deg
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. The antenna comes pre-connected with one
antenna control unit (ACU). This antenna is optimized for performance across the entire frequency
band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Broadband design.
Dual polarization.
Low profile for low visual impact.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
68
15.3
1900-2170
63
13.6
0-10
14.9 (12.8)
15.4 (13.3)
>18
>18
>28
Dual pol +/-45
< 1.5:1
>30
>150, N/A
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206513T-C-A20
Rev: A1
- 261 -
APXV18-206513T-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 65deg, 15.4dBi, 0.7m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206513T-C-A20
Rev: A1
- 262 -
APXV18-206516H-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 17.5-18.1dBi, 1.3m, VET, 0-10deg
Product Description
This antenna is an excellent choice for 3G, PCS, GSM1800 and Mobile TV networks where high
gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Optional remote tilt can be retrofitted
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
7.3
17.5 (15.4)
1850-1990
67
7
0-10
17.5 (15.4)
> 18 all (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
1900-2200
65
6.5
18.1 (16.0)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206516H-C
Rev: B
- 263 -
APXV18-206516H-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 17.5-18.1dBi, 1.3m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206516H-C
Rev: B
- 264 -
APXV18-206516H-C-A20
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 17.5-18.1dBi, 1.3m, VET, 0-10deg RET
Product Description
This antenna is an excellent choice for 3G, PCS, GSM1800 and Mobile TV networks where high
gain is required. The antenna comes pre-connected with one antenna control unit (ACU).
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
7.3
17.5 (15.4)
1850-1990
67
7
0-10
17.5 (15.4)
> 18 all (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
1900-2200
65
6.5
18.1 (16.0)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206516H-C-A20
Rev: D
- 265 -
APXV18-206516H-C-A20
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 17.5-18.1dBi, 1.3m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206516H-C-A20
Rev: D
- 266 -
APXV18-206517H-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18.5-19dBi, 1.9m, VET, 0-10deg
Product Description
This antenna is an excellent choice for 3G, PCS, GSM1800 and Mobile TV networks where high
gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Optional remote tilt can be retrofitted
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
5
18.5 (16.4)
1850-1990
67
4.8
0-10
18.5 (16.4)
> 18 all (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
1900-2200
65
4.6
19 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206517H-C
Rev: B
- 267 -
APXV18-206517H-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18.5-19dBi, 1.9m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206517H-C
Rev: B
- 268 -
APXV18-206517H-C-A20
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18.5-19dBi, 1.9m, VET, 0-10deg RET
Product Description
This antenna is an excellent choice for 3G, PCS, GSM1800 and Mobile TV networks where high
gain is required. The antenna comes pre-connected with one antenna control unit (ACU).
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
5
18.5 (16.4)
1850-1990
67
4.8
0-10
18.5 (16.4)
> 18 all (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
1900-2200
65
4.6
19 (16.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-206517H-C-A20
Rev: D
- 269 -
APXV18-206517H-C-A20
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18.5-19dBi, 1.9m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-206517H-C-A20
Rev: D
- 270 -
APXV18-209014-C
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 16.5dBi, 1.3m, VET, 0-10deg
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. This antenna is optimized for performance
across the entire frequency band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Optional remote tilt - can be retrofitted.
Two X-Polarized panels in a single radome.
Dual polarization.
Low profile for low visual impact.
Broadband design.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
88
7.0
6.4
0-10
16.5 (14.4)
>19 first (typically >22)
>17 all other (typically >20)
>26
Dual pol +/-45
< 1.5:1
>30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-209014-C
Rev: B
- 271 -
APXV18-209014-C
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 16.5dBi, 1.3m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-209014-C
Rev: B
- 272 -
APXV18-209014-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 88deg, 16.5dBi, 1.3m, VET, 0-10deg RET
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. The antenna comes pre-connected with one
antenna control unit (ACU).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-18dB)
Low profile for low visual impact
Dual polarization
Broadband design
Includes AISG 2.0 Compatible ACU-A20-N antenna control unit
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
88
7.0
6.4
0-10
16.5 (14.4)
> 19 first (typically > 22)
> 17 all other (typically > 20)
> 26
Dual pol +/-45
< 1.5:1
> 30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-209014-C-A20
Rev: D
- 273 -
APXV18-209014-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 88deg, 16.5dBi, 1.3m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-209014-C-A20
Rev: D
- 274 -
APXV18-209015-C
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.9dBi, 1.8m, VET, 0-10deg
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. This antenna is optimized for performance
across the entire frequency band (1710-2170 MHz).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB).
Optional remote tilt - can be retrofitted.
Two X-Polarized panels in a single radome.
Dual polarization.
Low profile for low visual impact.
Broadband design.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
88
5.1
4.5
0-10
17.9 (15.8)
17.7 (15.7)
>18 first (typically >22)
>18 all (Typically >20)
>28
Dual pol +/-45
< 1.5:1
>30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-209015-C
Rev: B
- 275 -
APXV18-209015-C
Optimizer Dual Polarized Antenna, 1710-2170, 90deg, 17.9dBi, 1.8m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-209015-C
Rev: B
- 276 -
APXV18-209015-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 88deg, 17.9/17.7dBi, 1.8m, VET, 0-10deg RET
Product Description
This X-Polarized variable tilt antenna provides exceptional suppression of all upper sidelobes at all
downtilt angles. It also features a wide downtilt range. The antenna comes pre-connected with one
antenna control unit (ACU).
Features/Benefits
Variable electrical downtilt - provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-18dB)
Low profile for low visual impact
Dual polarization
Broadband design
Includes AISG 2.0 Compatible ACU-A20-N antenna control unit
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 46 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1900
1900-2170
88
5.1
4.5
0-10
17.9 (15.8)
17.7 (15.7)
> 18 first (typically > 22)
>18 all (Typically > 20)
> 28
Dual pol +/-45
< 1.5:1
> 30
153
N/A, >170
50
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-209015-C-A20
Rev: D
- 277 -
APXV18-209015-C-A20
Optimizer Dual Polarized Antenna, 1710-2170, 88deg, 17.9/17.7dBi, 1.8m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV18-209015-C-A20
Rev: D
- 278 -
APXV18-276516-C
Cellular Cross Polarized High Band Antenna, 1710-2700, 65deg, 16.9-18.6dBi, 1.3m, VET, 0-12deg
Product Description
This antenna is an excellent choice for LTE 2.6, 3G, PCS, AWS, GSM 1800 and Mobile TV
networks where high gain is required.
Features/Benefits
Ultra Broadband design
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-12 deg.
High Suppression of all Upper Sidelobes
Optional remote tilt can be retrofitted
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
69
7.7
1850-1990
67
7.4
16.9
16.9
16.8
17.4
17.3
17.2
1920-2170
65
7.1
2200-2700
60
5.7
17.8
17.5
17.3
18.6
18.4
17.7
0-12
> 17 Typical
> 30
Dual pol +/-45
< 1.5:1
> 30
> 150
50
300
300
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
270
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-276516-C
Rev: C
- 279 -
APXV18-276516-C
Cellular Cross Polarized High Band Antenna, 1710-2700, 65deg, 16.9-18.6dBi, 1.3m, VET, 0-12deg
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV18-276516-C No ACU included Weight 10.4 kg, 22.9 lb
APXV18-276516-C-A20 (1) Pre-commissioned ACU included Weight 10.9 kg, 24.0 lb
For additional mounting information please click "External Document Links" below.
APXV18-276516-C
Rev: C
- 280 -
APXV18-276516-C-A20
Cellular Cross Polarized High Band Antenna, 1710-2700, 65deg, 16.9-18.6dBi, 1.3m, VET, 0-12deg RET
Product Description
This antenna is an excellent choice for LTE 2.6, 3G, PCS, AWS, GSM 1800 and Mobile TV
networks where high gain is required.
Features/Benefits
Ultra Broadband design
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-12 deg.
High Suppression of all Upper Sidelobes
Optional remote tilt can be retrofitted
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
69
7.7
1850-1990
67
7.4
16.9
16.9
16.8
17.4
17.3
17.2
1920-2170
65
7.1
2200-2700
60
5.7
17.8
17.5
17.3
18.6
18.4
17.7
0-12
> 17 Typical
> 30
Dual pol +/-45
< 1.5:1
> 30
> 150
50
300
300
300
Direct Ground
(2) 7-16 Long Neck Female/Bottom
270
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV18-276516-C-A20
Rev: A
- 281 -
APXV18-276516-C-A20
Cellular Cross Polarized High Band Antenna, 1710-2700, 65deg, 16.9-18.6dBi, 1.3m, VET, 0-12deg RET
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV18-276516-C No ACU included Weight 10.4 kg, 22.9 lb
APXV18-276516-C-A20 (1) Pre-commissioned ACU included Weight 10.9 kg, 24.0 lb
For additional mounting information please click "External Document Links" below.
APXV18-276516-C-A20
Rev: A
- 282 -
APXV23-276512-C
Cellular Cross Polarized High Band Antenna, 2300-2700, 60deg, 14.8dBi, 0.5m, VET, 0-10deg
Product Description
This antenna is an excellent choice for LTE and WiMAX networks where high gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High vertical beamwidth suitable for small cells application
Optional remote tilt can be retrofitted
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
2300-2700
60
15.5
0-10
14.8 (12.7)
18 Typical
> 30
Dual pol +/-45
< 1.5:1
>30
> 150
50
250
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-4
60-120 (2.36-4.72)
2.7 (5.95)
APXV23-276512-C
Rev: A1
- 283 -
APXV23-276512-C
Cellular Cross Polarized High Band Antenna, 2300-2700, 60deg, 14.8dBi, 0.5m, VET, 0-10deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV23-276512-C
Rev: A1
- 284 -
APXV23-276516-C
Cellular Cross Polarized High Band Antenna, 2300-2700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
Product Description
This antenna is an excellent choice for LTE and WiMAX networks where high gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes
Optional remote tilt can be retrofitted
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
2300-2700
60
5.7
0-12
18.6 (16.5)
> 17 Typical
> 30
Dual pol +/-45
< 1.5:1
> 30
> 150
50
270
Direct Ground
(2) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV23-276516-C
Rev: A1
- 285 -
APXV23-276516-C
Cellular Cross Polarized High Band Antenna, 2300-2700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV23-276516-C
Rev: A1
- 286 -
APXV86-906513L-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 15.2dBi, 1.3m, VET, 0-10deg
Product Description
An ideal antenna for LTE800 (Digital Dividend), CDMA and GSM900 networks.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust.
Optimized suppression lobes allows strong mechanical tilt (typically 20dB).
Effective polarization diversity ensured by high cross polar discrimination.
Possible camouflage solution on demand.
AISG compatible remote tilt available Add suffix -A20 to the model number
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
67
16.5
806-870
68
16.6
0-10
14.0 (11.9)
>18
>30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14 (11.9)
>17
870-960
63
15
15.2 (13.1)
>18
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV86-906513L-C
Rev: C
- 287 -
APXV86-906513L-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 15.2dBi, 1.3m, VET, 0-10deg
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV86-906513L-C No ACU included Weight 17.4 kg, 38.3 lb
APXV86-906513L-C-A20 (1) Pre-commissioned ACU included Weight 17.9 kg, 39.4 lb
For additional mounting information please click "External Document Links" below.
APXV86-906513L-C
Rev: C
- 288 -
APXV86-906513T-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, VET, 4-14deg
Product Description
An ideal antenna for LTE800 (Digital Dividend), CDMA and GSM900 networks.
Features/Benefits
Continuously adjustable electrical downtilt from 4 to 14 provides enhanced precision in cell
footprint.
Quick and easy to adjust.
Upgradeable to remote electrical tilt.
Optimized suppression lobes allows strong mechanical tilt (typically 20dB).
Effective polarization diversity ensured by high cross polar discrimination.
Possible camouflage solution on demand.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
67
16.5
806-870
67
16
4-14
14.4 (12.3)
>17
>30
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
14 (11.9)
>17
870-960
63
14.5
15 (12.9)
>18
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV86-906513T-C
Rev: B
- 289 -
APXV86-906513T-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 15dBi, 1.3m, VET, 4-14deg
Vertical Pattern
Horizontal Pattern
Notes
Available Configurations
APXV86-906513T-C No ACU included Weight 17.4 kg, 38.3 lb
APXV86-906513T-C-A20 (1) Pre-commissioned ACU included Weight 17.9 kg, 39.4 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV86-906513T-C
Rev: B
- 290 -
APXV86-906515-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 17.5dBi, 2m, VET, 0-10deg
Product Description
An ideal antenna for LTE800 (Digital Dividend), CDMA and GSM900 networks where high gain is
required.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust.
Upgradeable to remote electrical tilt.
Optimized suppression lobes allows strong mechanical tilt (typically 20dB).
Effective polarization diversity ensured by high cross polar discrimination.
Possible camouflage solution on demand.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
67
10.2
806-870
65
10
0-10
16.5 (14.4)
>18 (typically >20)
>30
Dual pol +/-45
< 1.5:1, < 1.5:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
16.2 (14.1)
870-960
65
9.5
17.5 (15.4)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV86-906515-C
Rev: C
- 291 -
APXV86-906515-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 17.5dBi, 2m, VET, 0-10deg
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV86-906515-C No ACU included Weight 26 kg, 57.3 lb
APXV86-906515-C-A20 (1) Pre-commissioned ACU included Weight 26.5 kg, 58.4 lb
For additional mounting information please click "External Document Links" below.
APXV86-906515-C
Rev: C
- 292 -
APXV86-906516-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 18.0dBi, 2.6m, VET, 0-10deg
Product Description
An ideal antenna for LTE800 (Digital Dividend), CDMA and GSM900 networks where high gain is
required.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust.
Upgradeable to remote electrical tilt.
Optimized suppression lobes allows strong mechanical tilt (typically 20dB).
Effective polarization diversity ensured by high cross polar discrimination.
Possible camouflage solution on demand.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
68
8.5
806-870
66
8
0-10
17.2
17.1
17.0
>18
>18 all (Typically >20)
>26
Dual pol +/-45
< 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
17.0
16.8
16.6
870-960
63
7
18.0
17.8
17.6
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV86-906516-C
Rev: D
- 293 -
APXV86-906516-C
Optimizer Dual Polarized Antenna, 790-960, 65deg, 18.0dBi, 2.6m, VET, 0-10deg
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV86-906516-C No ACU included Weight 30.4 kg, 67.0 lb
APXV86-906516-C-A20 (1) Pre-commissioned ACU included Weight 30.9 kg, 68.1 lb
For additional mounting information please click "External Document Links" below.
Requires optional accessory 30825.000 (Interface Plate for Antenna Control Unit) for remote tilt operation. Please contact sales for
details.
APXV86-906516-C
Rev: D
- 294 -
APXV86-909014-C
Optimizer Dual Polarized Antenna, 790-960, 90deg, 15.3dBi, 2m, VET, 0-10deg
Product Description
Dense urban for LTE800 (Digital Dividend), CDMA and GSM 900 network optimisation.
Features/Benefits
One single Cross polarized antenna.
Quick and easy to adjust
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0 10 deg.
Upgradable to remote electrical tilt
Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
Reduction of site dimensions will ease site acceptance.
Slanted DP antenna allows air combining, thus 3dB saving in power budget.
Compatible with usual base stations with 35 dB typical isolation between ports.
Optimized suppression lobes ( Typically > 20dB ) allows strong mechanical tilt.
Effective polarisation diversity ensured by high cross polar discrimination..
Possible camouflage solution on demand.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
85
14.9 (12.8)
806-870
85
10
0-10
15.1 (13.0)
>18
>18
>23
Dual pol +/-45
< 1.5:1
>30
>150
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
870-960
88
15.3 (13.2)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV86-909014-C
Rev: C
- 295 -
APXV86-909014-C
Optimizer Dual Polarized Antenna, 790-960, 90deg, 15.3dBi, 2m, VET, 0-10deg
Antenna Array
Vertical Pattern
Horizontal Pattern
Antenna Drawing
All information contained in the present datasheet is subject to confirmation at time of ordering
Notes
Available Configurations
APXV86-909014-C No ACU included Weight 26 kg, 57.3 lb
APXV86-909014-C-A20 (1) Pre-commissioned ACU included Weight 26.5 kg, 58.4 lb
For additional mounting information please click "External Document Links" below.
APXV86-909014-C
Rev: C
- 296 -
APXV99LL20BI-U
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 790-2700MHz, 65deg, 15.3-18dBi, 2.0m,
VET, 0-10/0-12deg
Product Description
This antenna is an ideal choice for complicated sites with 2 CDMA-GSM and 2 DCS-UMTS-LTE
band systems. It utilizes two Dual Polarized side-by-side antennas in an integrated radome.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes
Independent control of electrical downtilt for 800-900 and 1800/2600 MHz
Optional remote tilt can be retrofitted
4x Ports 790-960 MHz
4x Ports 1710-2700MHz
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
68
10
870-960
65
8.7
15.3 (13.2)
15.7 (13.6)
1710-2200
65
6.5
2200-2700
60
5.4
17.1 (15.0)
18.4 (16.3)
0-10 / 0-12
> 17 Typical
>25
Dual pol +/-45
< 1.5:1
>30
>150
50
500
500
300
Direct Ground
(8) 7-16 DIN Female/Bottom
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-5
60-120 (2.36-4.72)
13 (28.6)
APXV99LL20BI-U
Rev: A
- 297 -
APXV99LL20BI-U
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 790-2700MHz, 65deg, 15.3-18dBi, 2.0m,
VET, 0-10/0-12deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV99LL20BI-U
Rev: A
- 298 -
APXV99RR20BI-U
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 824-2200MHz, 65deg, 16.0-19.2dBi, 2.0m,
VET,0-10deg
Product Description
This antenna is an ideal choice for complicated sites with 2 CDMA-GSM and 2 DCS-UMTS band
systems. It utilizes two Dual Polarized side-by-side antennas in an integrated radome.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Optional remote tilt can be retrofitted
Low profile for low visual impact
Quick and easy to adjust
4x Ports 824-960MHz
4x Ports 1710-2200MHz
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
64
10
870-960
63
9.3
16.0 (13.9)
16.3 (14.2)
>25
>24
>28
>30
500
500
1710-1880
62
5.3
0-10
18.8 (16.7)
> 18 Typical
> 16
>25
Dual pol +/-45
< 1.5:1
>30
>150
50
300
Direct Ground
(8) 7-16 DIN Female/Bottom
1850-1990
61
5.0
1900-2200
60
4.7
19.1 (17.0)
19.2 (17.1)
>27
>28
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-5
60-120 (2.36-4.72)
13 (28.6)
APXV99RR20BI-U
Rev: A
- 299 -
APXV99RR20BI-U
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 824-2200MHz, 65deg, 16.0-19.2dBi, 2.0m,
VET,0-10deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV99RR20BI-U
Rev: A
- 300 -
APXV99RR20BI-V
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 824-2200MHz, 65deg, 16.0-19.2dBi, 2.0m,
VET,0-10deg
Product Description
This antenna is an ideal choice for complicated sites with 2 CDMA-GSM and 2 DCS-UMTS band
systems. It utilizes two Dual Polarized side-by-side antennas in an integrated radome.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Optional remote tilt can be retrofitted
Low profile for low visual impact
Quick and easy to adjust
4x Ports 824-960MHz
4x Ports 1710-2200MHz
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
824-894
64
10
870-960
63
9.3
16.0 (13.9)
16.3 (14.2)
>25
>24
>28
>30
500
500
1710-1880
62
5.3
0-10
18.8 (16.7)
> 18 Typical
> 16
>25
Cross pol +/-45
< 1.5:1
>30
>150
50
300
Direct Ground
(8) 7-16 DIN Female/Bottom
1850-1990
61
5.0
1900-2200
60
4.7
19.1 (17.0)
19.2 (17.1)
>27
>28
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-5D
60-120 (2.36-4.72)
8 (17.6)
APXV99RR20BI-V
Rev: A
- 301 -
APXV99RR20BI-V
Optimizer Cellular Dual Polarized Dual Band Quad Antenna, 824-2200MHz, 65deg, 16.0-19.2dBi, 2.0m,
VET,0-10deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV99RR20BI-V
Rev: A
- 302 -
APXV9R13B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 14-18dBi, 1.4m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Optional remote tilt can be retrofitted
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
68
16.5
870-960
65
14.5
13.5 (11.4)
14 (11.9)
>25
>25
500
500
1710-1880
65
7
0-10
17 (14.9)
> 18 Typical
> 16
>25
Dual pol +/-45
< 1.5:1
>30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
60
6.5
1900-2200
60
6.5
17.5 (15.4)
18.0 (15.9)
>25
>25
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R13B-C
Rev: B
- 303 -
APXV9R13B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 14-18dBi, 1.4m, VET, 0-10deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R13B-C
Rev: B
- 304 -
APXV9R13B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 14-18dBi, 1.4m, VET, 010deg, RET
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH. The
antenna comes pre-connected with two antenna control units (ACU).
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
68
16.5
870-960
65
14.5
13.5 (11.4)
14 (11.9)
>25
>25
500
500
1710-1880
65
7
0-10
17 (14.9)
> 18 Typical
> 16
>25
Dual pol +/-45
< 1.5:1
>30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
60
6.5
1900-2200
60
6.5
17.5 (15.4)
18.0 (15.9)
>25
>25
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R13B-C-A20
Rev: B
- 305 -
APXV9R13B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 14-18dBi, 1.4m, VET, 010deg, RET
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R13B-C-A20
Rev: B
- 306 -
APXV9R20B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 16.2-19dBi, 2.0m, VET, 010deg
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Optional remote tilt can be retrofitted
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
67
10
870-960
65
9.0
15.8 (13.7)
16.2 (14.1)
>25
>24
25-28
>30
500
500
1710-1880
62
5.3
0-10
18.2 (16.1)
> 18 Typical
> 16
>25
Dual pol +/-45
< 1.5:1
>30
> 30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
61
5.0
1900-2200
60
4.7
18.5 (16.4)
19 (16.9)
>27
28
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R20B-C
Rev: C
- 307 -
APXV9R20B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 16.2-19dBi, 2.0m, VET, 010deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R20B-C
Rev: C
- 308 -
APXV9R20B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 16.2-19dBi, 2.0m, VET, 010deg, RET
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH. The
antenna comes pre-connected with two antenna control units (ACU).
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
67
10
870-960
65
9.0
15.8 (13.7)
16.2 (14.1)
>25
>24
25-28
>30
500
500
1710-1880
62
5.3
0-10
18.2 (16.1)
> 18 Typical
> 16
>25
Dual pol +/-45
< 1.5:1
>30
> 30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
61
5.0
1900-2200
60
4.7
18.5 (16.4)
19 (16.9)
>27
28
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R20B-C-A20
Rev: C
- 309 -
APXV9R20B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 16.2-19dBi, 2.0m, VET, 010deg, RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R20B-C-A20
Rev: C
- 310 -
APXV9R26B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 17-19.3dBi, 2.6m, VET, 010deg
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH.
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Optional remote tilt can be retrofitted
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
67
7.7
870-960
65
7.2
16.5 (14.4)
17 (14.9)
>26
>25
25-28
>30
500
500
1710-1880
65
5.3
0-10
18.3 (16.2)
> 18 Typical
> 16
>26
Dual pol +/-45
< 1.5:1
>30
> 30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
60
5
1900-2200
60
4.7
18.8 (16.7)
19.3 (17.2)
>26
>27
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R26B-C
Rev: B
- 311 -
APXV9R26B-C
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 17-19.3dBi, 2.6m, VET, 010deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R26B-C
Rev: B
- 312 -
APXV9R26B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 17-19.3dBi, 2.6m, VET, 010deg, RET
Product Description
This antenna is an ideal choice for dual band site upgrade for high traffic areas. It is applicable for
multiple bands such as Digital Dividend, CDMA, GSM, DCS, PCS, UMTS and DVB-SH. The
antenna comes pre-connected with two antenna control units (ACU).
Features/Benefits
Easy swap out of GSM or CDMA panel for dual band panel
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High Suppression of all Upper Sidelobes (Typically <-20dB)
Independent control of electrical downtilt for CDMA-900 and 1800/1900MHz bands
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-894
67
7.7
870-960
65
7.2
16.5 (14.4)
17 (14.9)
>26
>25
25-28
>30
500
500
1710-1880
65
5.3
0-10
18.3 (16.2)
> 18 Typical
> 16
>26
Dual pol +/-45
< 1.5:1
>30
> 30
>150
50
300
Direct Ground
(4) 7-16 DIN Female/Bottom
1850-1990
60
5
1900-2200
60
4.7
18.8 (16.7)
19.3 (17.2)
>26
>27
>30
>30
300
300
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXV9R26B-C-A20
Rev: B
- 313 -
APXV9R26B-C-A20
Optimizer Cellular Dual Polarized Dual Band Antenna, 790-2200, 65deg, 17-19.3dBi, 2.6m, VET, 010deg, RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXV9R26B-C-A20
Rev: B
- 314 -
APXVE13-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15.7dBi, 1.3m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
66
14.0
824-890
65
13.5
0-15
15.4 (13.3)
>16
>25
Dual pol +/-45
< 1.4:1, < 1.3:1, < 1.3:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
15.2 (13.1)
880-960
63
12.5
15.7 (13.6)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE13-C
Rev: C
- 315 -
APXVE13-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15.7dBi, 1.3m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE13-C No ACU included
APXVE13-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE13-C
Rev: C
- 316 -
APXVE13F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15.7dBi, 1.3m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
66
14.0
824-890
65
13.5
0-15
15.4 (13.3)
>16
>25
Dual pol +/-45
< 1.4:1, < 1.3:1, < 1.3:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
15.2 (13.1)
880-960
63
12.5
15.7 (13.6)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE13F-C
Rev: C
- 317 -
APXVE13F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 15.7dBi, 1.3m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE13F-C No ACU included
APXVE13F-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE13F-C
Rev: C
- 318 -
APXVE20-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 16.8dBi, 2.0m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
66
9.5
824-890
65
9.0
0-10
16.6 (14.5)
>16
>26
Dual pol +/-45
< 1.4:1, < 1.4:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
16.4 (14.3)
880-960
63
9.0
16.8 (14.7)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE20-C
Rev: C
- 319 -
APXVE20-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 16.8dBi, 2.0m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE20-C No ACU included
APXVE20-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE20-C
Rev: C
- 320 -
APXVE20F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 16.8dBi, 2.0m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
66
9.5
824-890
65
9.0
0-10
16.6 (14.5)
>16
>26
Dual pol +/-45
< 1.4:1, < 1.4:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
16.4 (14.3)
880-960
63
9.0
16.8 (14.7)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE20F-C
Rev: C
- 321 -
APXVE20F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 16.8dBi, 2.0m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE20F-C No ACU included
APXVE20F-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE20F-C
Rev: C
- 322 -
APXVE26-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17.8dBi, 2.6m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
65
8.0
824-890
63
7.8
0-10
17.5 (15.4)
>16
>28
Dual pol +/-45
< 1.5:1, < 1.5:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
17.0 (14.9)
880-960
61
7.2
17.8 (15.7)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE26-C
Rev: H
- 323 -
APXVE26-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17.8dBi, 2.6m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE26-C No ACU included
APXVE26-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE26-C
Rev: H
- 324 -
APXVE26F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17.8dBi, 2.6m, VET, 0-10deg
Product Description
This antenna is an ideal choice for dense urban LTE800 and GSM 900 network optimization.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust
Upgradeable to remote electrical tilt
Optimized suppression lobes allows strong tilt (typically 17dB)
Effective polarization diversity ensured by high cross polar discrimination
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
65
8.0
824-890
63
7.8
0-10
17.5 (15.4)
>16
>28
Dual pol +/-45
< 1.5:1, < 1.5:1, < 1.4:1
>30
>150
50
500
Direct Ground
(2) 7-16 DIN Female/Bottom
17.0 (14.9)
880-960
61
7.2
17.8 (15.7)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
45-120 (1.7-4.7)
4.3 (9.5)
APXVE26F-C
Rev: D
- 325 -
APXVE26F-C
Optimizer Panel Dual Polarized Antenna, 790-960, 65deg, 17.8dBi, 2.6m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVE26F-C No ACU included
APXVE26F-C-A20 (1) Pre-commissioned ACU included
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVE26F-C
Rev: D
- 326 -
APXVEE26-C
Optimizer Cross Polarized Quad Pol Antenna, 790-960, 65deg, 17.4 dBi, 2.6m, VET, 0-10deg
Product Description
This quad-polarized antenna is an ideal choice for co-siting applications for GSM900, UMTS900
and LTE800.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference
The tilt is infield adjustable 0-10 deg on on each cross polarized antenna array
High suppression of all upper sidelobes
Optional remote tilt can be retrofitted
Quad band version 4 ports
Quick and easy to adjust
Ideal for GSM900 and UMTS900 applications
Extended band for LTE 800 790-960 MHz
High gain direct replacement for LTE800 overlays
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
69
8.1
806-896
68
7.9
0-10
17.2
17.0
16.8
17
25
Dual pol +/-45
< 1.5:1
>30
>153
50
500
Direct Ground
(4) 7-16 Long Neck Female/Bottom
17
16.8
16.6
880-960
67
7.2
17.4
17.2
17
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-5E
60-120 (2.36-4.72)
10 (22.0)
APXVEE26-C
Rev: B
- 327 -
APXVEE26-C
Optimizer Cross Polarized Quad Pol Antenna, 790-960, 65deg, 17.4 dBi, 2.6m, VET, 0-10deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVEE26-C No ACU included Weight 48 kg, 105.8 lb
APXVEE26-C-A20 (2) Pre-commissioned ACUs included Weight 49.2 kg, 108.5 lb
APXVEE26-C-NA20 (2) Pre-commissioned ACUs included with daisy-chain cable Weight 49.4 kg, 108.9 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVEE26-C
Rev: B
- 328 -
APXVERR20X-C
RF X-TREME Cross Polarized Triple Band Antenna, 790-2170MHz, 65deg, 16/17.7/18.2dBi, 2.0m,
VET, 2-12deg
Product Description
The new RF X-TREME base station antenna design provides the highest gain combined with the
best vertical pattern control of any triple band antenna of its size in the industry. It is an ideal choice
for site upgrades and new deployments where three frequency bands, or MIMO/4 RX diversity, is
used to add capacity and increase coverage. Only 300mm wide and 2.0 meters high, it maintains
the size of a dual band antenna, while adding a third antenna path with no compromise in RF
performance. Reflecting RFS on-going commitment for 3G and 4G technologies, it can be used for
multiple bands such as LTE800, CDMA850, GSM900, PCS1900 and UMTS2100. This multi-band
antenna features superior pattern symmetry and a phase shifter for each radiating dipole providing
exceptional patterns at all tilt settings. It is also available with an optional, internal and field
replaceable AISG 2.0 antenna control unit (ACU) for remote electrical tilt (RET) compatibility.
Features/Benefits
Triple band antenna with 6 ports - 2x 790-960 MHz and 4x 1710-2170 MHz
Very high gain, ideal for 3G and LTE 1800 deployment improves coverage
Internal and field-replaceable RET solutions easy and flexible installation system
One phase shifter per radiating element improves radiating patterns
High suppression of upper sidelobes reduces cell interference
Superior X-Pol Discrimination improves Rx diversity
Enhanced tilt range from 2 to 12 degrees ideal for applications in dense areas
Designed with low windload minimizes tower loading
Technical Specifications
All information contained in the present datasheet is subject to confirmation at time of ordering
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Cross Polar Discrimination (XPD) 0, dB
Cross Polar Discrimination (XPD) 60, dB
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
790-862
69
11.2
806-894
68
10.7
880-960
68
10
15.5 (13.4)
15.7 (13.6)
16.0 (13.9)
1710-1880
67
6.1
1850-1990
66
5.7
1920-2170
65
5.4
18.2 (16.1)
18.2 (16.1)
2-12
17.7 (15.6)
18
25
Dual pol +/-45
< 1.5:1
30
>150
Typ. 20
Typ. 10
50
300
Direct Ground
(6) 7-16 Long Neck Female/Bottom
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVERR20X-C
Rev: A
- 329 -
APXVERR20X-C
RF X-TREME Cross Polarized Triple Band Antenna, 790-2170MHz, 65deg, 16/17.7/18.2dBi, 2.0m,
VET, 2-12deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVERR20X-C No ACU included Weight 28 kg, 61.7 lb
APXVERR20X-C-A20 (3) Internal, field-replaceable AISG 2.0 ACUs (ACU-A20-S) Weight 29.5 kg, 65 lb
APXVERR20X-C-NA20 (3) Internal, field-replaceable AISG 2.0 ACUs (ACU-A20-S) including (2) AISG cables Weight 29.8 kg, 65.7 lb
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVERR20X-C
Rev: A
- 330 -
APXVF24S-C-A20
Product Description
An ideal antenna for LTE700, LTE800 (Digital Dividend), CDMA and GSM900 networks where high
gain is required.
Features/Benefits
Continuously adjustable electrical downtilt from 0 to 10 provides enhanced precision in cell
footprint.
Quick and easy to adjust.
Upgradeable to remote electrical tilt.
Effective polarization diversity ensured by high cross polar discrimination.
Possible camouflage solution on demand.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-806
65
9
15.7 (13.6)
790-862
64
8.5
0-10
16.2 (14.1)
>16
25
Dual pol +/-45
< 1.5:1
>30
153
50
500
Direct Ground
(2) 7-16 Long Neck Female/Bottom
824-896
63
8
16.5 (14.4)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Operation temperature, C (F)
Radome Material/Color
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
50-115 (2-4.5)
3.4 (7.5)
APXVF24S-C-A20
Rev: P2
- 331 -
APXVF24S-C-A20
Notes
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVF24S-C-A20
Rev: P2
- 332 -
APXVFRR12X-C-I20
RF X-TREME Cross Polarized Triple Band Antenna, 698-2170MHz, 65deg, 13.3/16.0/16.3dBi, 1.2m,
VET, 0-8deg, RET
Product Description
The new RF X-TREME base station antenna design provides the highest gain and cross polar
discrimination combined with the best vertical pattern control of any triple band antenna of its size in
the industry. It is an ideal choice for site upgrades and new deployments where three frequency
bands, or MIMO/4 RX diversity, is used to add capacity and increase coverage. Only 12 inches wide
and 1.2 meters high, it maintains the size of a dual band antenna, while adding a third antenna path
with no compromise in RF performance. Reflecting RFS on-going commitment for 4G technologies,
it can be used for multiple bands such as LTE700, CDMA850, PCS1900 and AWS2100. This multiband antenna features superior pattern symmetry and a phase shifter for each radiating dipole
providing exceptional patterns at all tilt settings. It is also available with an optional, integrated and
field replaceable AISG 2.0 antenna control unit (ACU) for remote electrical tilt (RET) compatibility.
Features/Benefits
Cross polarization triple band version with 6 ports (2x 698-894 MHz and 4x 1710-2170 MHz)
One phase shifter per radiating element improves radiating patterns
Superior X-Pol Discrimination improves Rx diversity
Integrated Remote Electrical Tilt (RET) reduces installation time and increases reliability
High suppression of upper sidelobes reduces cell interference
Enhanced tilt range from 0 to 8 degrees ideal for applications in dense areas
Variable electrical downtilt provides enhanced precision in controlling intercell
interference
High reliability designed to last in a tower top environment
Design incorporates low windload and low weight minimizes tower loading
Quick and easy to install reduces installation time and costs
APXVFRR12X-C-I20
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
698-806
72
20
0-8
13 (10.9)
806-894
72
17.5
0-8
13.3 (11.2)
1710-1880
1850-1990
65
65
8.7
8.5
0-10
0-10
15.6 (13.5)
16 (13.9)
18
27
Dual pol +/-45
< 1.5:1
>30 typ.
>153
50
300
Direct Ground
(6) 7-16 Long Neck Female/Bottom
1920-2170
65
8.0
0-10
16.3 (14.2)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVFRR12X-C-I20
Rev: B
- 333 -
APXVFRR12X-C-I20
RF X-TREME Cross Polarized Triple Band Antenna, 698-2170MHz, 65deg, 13.3/16.0/16.3dBi, 1.2m,
VET, 0-8deg, RET
Antenna Array
Antenna Drawing
Notes
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVFRR12X-C-I20
Rev: B
- 334 -
APXVLL13-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2700, 65deg, 17.1-18.3dBi, 1.3m, VET, 0-12deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for LTE 2.6, 3G, PCS, AWS, GSM
1800 and Mobile TV networks where high gain is required. These antennas are especially well
suited for MIMO applications.
Features/Benefits
Ultra Broadband design
Two x-polarized broadband panels in a single radome reduced tower loading
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-12 deg.
High Suppression of all Upper Sidelobes
Optional remote tilt can be retrofitted
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
7.8
1850-1990
67
7.3
17.1 (15.0)
17.1 (15.0)
1900-2200
65
7.3
2200-2700
60
6.0
17.6 (15.5)
18.3 (16.2)
> 30
> 30
0-12
> 17 Typical
> 30
Dual pol +/-45
< 1.5:1
> 28
> 30
> 150
50
300
300
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
270
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVLL13-C
Rev: B
- 335 -
APXVLL13-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2700, 65deg, 17.1-18.3dBi, 1.3m, VET, 0-12deg
Notes
Available Configurations
APXVLL13-C No ACU included Weight 17.9 kg, 39.5 lb
APXVLL13-C-A20 (2) Pre-commissioned ACU included Weight 18.8 kg, 41.4 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVLL13-C
Rev: B
- 336 -
APXVLL13N-C
WindMaster Cross Polarized Quad-Pol Antenna, 1710-2700, 65deg, 17.5-18.5dBi, 1.3m, VET, 0-12deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for LTE 2.6, 3G, PCS, AWS, GSM
1800 and Mobile TV networks where high gain is required. These antennas are especially well
suited for MIMO applications.
Features/Benefits
Ultra-broadband design
Best-in-the-industry gain values
Two x-polarized broadband panels in a single narrow radome reduced tower loading &
lower profile
Variable electrical downtilt provides enhanced precision in controlling intercell
interference
High suppression of all upper sidelobes
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
65
7.5
1850-1990
65
7.3
17.5
17.4
17.3
17.6
17.5
17.4
1920-2170
65
7.0
2200-2700
63
5.5
17.7
17.6
17.5
18.5
18.0
17.5
0-12
17 Typical
Typically 30
Dual pol +/-45
< 1.5:1
>30
>153
50
300
300
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
270
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVLL13N-C
Rev: E
- 337 -
APXVLL13N-C
WindMaster Cross Polarized Quad-Pol Antenna, 1710-2700, 65deg, 17.5-18.5dBi, 1.3m, VET, 0-12deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVLL13N-C No ACU included Weight 16.9 kg, 37.3 lb
APXVLL13N-C-A20 (2) Pre-commissioned ACUs included Weight 17.9 kg, 39.5 lb
APXVLL13N-C-NA20 (2) Pre-commissioned ACUs included with daisy-chain cable Weight 18.0 kg, 39.7 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVLL13N-C
Rev: E
- 338 -
APXVMM13A-C
WindMaster Cross Polarized Quad-Pol Antenna, 2496-2700, 65deg, 18.5dBi, 1.3m, VET, 0-12deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for LTE 2.6, 3G, 4G and WiMAX
networks where high gain is required. These antennas are especially well suited for MIMO
applications.
Features/Benefits
Best-in-the-industry gain values
Two x-polarized broadband panels in a single narrow radome reduced tower loading &
lower profile
Variable electrical downtilt provides enhanced precision in controlling intercell
interference
High suppression of all upper sidelobes
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, Low Tilt, dBi
Gain, Mid Tilt, dBi
Gain, High Tilt, dBi
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
2496-2700
63
5.5
0-12
18.5
18
17.5
17 Typical
Typically 30
Dual pol +/-45
< 1.5:1
>30
>153
50
270
Direct Ground
(4) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVMM13A-C
Rev: P4
- 339 -
APXVMM13A-C
WindMaster Cross Polarized Quad-Pol Antenna, 2496-2700, 65deg, 18.5dBi, 1.3m, VET, 0-12deg
Antenna Array
Antenna Drawing
Notes
Available Configurations
APXVMM13A-C No ACU included Weight 16.9 kg, 37.3 lb
APXVMM13A-C-A20 (2) Pre-commissioned ACUs included Weight 17.9 kg, 39.5 lb
APXVMM13A-C-NA20 (2) Pre-commissioned ACUs included with daisy-chain cable Weight 18.0 kg, 39.7 lb
For additional mounting information please click "External Document Links" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVMM13A-C
Rev: P4
- 340 -
APXVMM13-C
Optimizer Side-by-Side Dual Polarized Antenna, 2300-2700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for LTE and WiMAX networks
where high gain is required.
Features/Benefits
Two x-polarized broadband panels in a single radome reduced tower loading
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-12 deg.
High Suppression of all Upper Sidelobes
Optional remote tilt can be retrofitted
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
2300-2700
60
6.0
0-12
18.6 (16.5)
> 17 Typical
> 30
Dual pol +/-45
< 1.5:1
> 30
> 150
50
270
Direct Ground
(4) 7-16 Long Neck Female/Bottom
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVMM13-C
Rev: A1
- 341 -
APXVMM13-C
Optimizer Side-by-Side Dual Polarized Antenna, 2300-2700, 65deg, 18.6dBi, 1.3m, VET, 0-12deg
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVMM13-C
Rev: A1
- 342 -
APXVR13S-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18dBi, 1.3m, VET, 0-10deg
Product Description
This antenna is an excellent choice for 3G, PCS, GSM1800 and Mobile TV networks where high
gain is required.
Features/Benefits
Variable electrical downtilt provides enhanced precision in controlling intercell
interference. The tilt is infield adjustable 0-10 deg.
High gain performance
Optional remote tilt can be retrofitted
Broadband design
Dual polarization
Low profile for low visual impact
Quick and easy to adjust
High front-to-back ratio
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
1st Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
65
7.1
17.5 (15.4)
1850-1990
63
6.5
0-10
17.8 (15.7)
15 Typical
Typically 30
Dual pol +/-45
< 1.4:1
> 30
> 150
>170
50
250
Direct Ground
(2) 7-16 Long Neck Female/Bottom
1900-2170
61
6.3
18.2 (16.1)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Applied Wind Load Standard
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
Included
50-115 (1.95-4.5)
2.0 (4.4)
APXVR13S-C
Rev: A
- 343 -
APXVR13S-C
Optimizer Dual Polarized Antenna, 1710-2200, 65deg, 18dBi, 1.3m, VET, 0-10deg
Notes
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVR13S-C
Rev: A
- 344 -
APXVRR13-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.3m, VET, 0-10deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for GSM1800, PCS, UMTS and
Mobile TV networks where high gain is required. These antennas are especially well suited for
MIMO applications.
Features/Benefits
Two x-polarized broadband panels in a single radome reduced tower loading
Rugged construction high reliability
Superior gain tracking difference between UL and DL <1dB
Stable azimuth horizontal beamwidth difference <6deg between UL and DL
Low PIM no system down-time, high call quality and reduced number of dropped calls
Excellent upper sidelobe suppression allows strong mechanical tilt
High gain provides better coverage
Wideband frequency performance enables future growth and increases flexibility
High front-to-back ratio
Optional remote tilt can be retrofitted
AISG compatible remote tilt available Add suffix -NA20 to the model number
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
68
7.4
1850-1990
67
7
0-10
17.5 (15.4)
> 18 (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
17.2 (15.1)
1900-2200
65
6.5
18.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVRR13-C
Rev: C
- 345 -
APXVRR13-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.3m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVRR13-C
Rev: C
- 346 -
APXVRR13-C-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.3m, VET, 0-10deg RET
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for GSM1800, PCS, UMTS and
Mobile TV networks where high gain is required. These antennas are especially well suited for
MIMO applications. The antenna comes pre-connected with two antenna control units (ACU).
Features/Benefits
Two x-polarized broadband panels in a single radome reduced tower loading
Rugged construction high reliability
Superior gain tracking difference between UL and DL <1dB
Stable azimuth horizontal beamwidth difference <6deg between UL and DL
Low PIM no system down-time, high call quality and reduced number of dropped calls
Excellent upper sidelobe suppression allows strong mechanical tilt
High gain provides better coverage
Wideband frequency performance enables future growth and increases flexibility
High front-to-back ratio
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
68
7.4
17.2 (15.1)
1850-1990
67
7
0-10
17.5 (15.4)
> 18 (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
> 30
153
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
1900-2200
65
6.5
18.0 (15.9)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVRR13-C-A20
Rev: C
- 347 -
APXVRR13-C-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.0dBi, 1.3m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVRR13-C-A20
Rev: C
- 348 -
APXVRR20-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.7dBi, 1.9m, VET, 0-10deg
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for GSM1800, PCS, UMTS and
Mobile TV networks where high gain is required.
Features/Benefits
Two x-polarized broadband panels in a single radome reduced tower loading
Rugged construction high reliability
Superior gain tracking difference between UL and DL <1dB
Stable azimuth horizontal beamwidth difference <6deg between UL and DL
Low PIM no system down-time, high call quality and reduced number of dropped calls
Excellent upper sidelobe suppression allows strong mechanical tilt
High gain provides better coverage
Wideband frequency performance enables future growth and increases flexibility
High front-to-back ratio
Optional remote tilt can be retrofitted
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
5.2
1850-1990
67
5
0-10
18.4 (16.3)
> 18 (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
> 30
> 150, >150, N/A
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
18.3 (16.2)
1900-2200
64
4.7
18.7 (16.6)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVRR20-C
Rev: B
- 349 -
APXVRR20-C
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.7dBi, 1.9m, VET, 0-10deg
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVRR20-C
Rev: B
- 350 -
APXVRR20-C-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.7dBi, 1.9m, VET, 0-10deg RET
Product Description
A combination of two X-Polarized antennas in a single radome, the RFS Quad-Pol antennas are
designed for applications requiring a minimum number of antennas at a cell site and reduced tower
loading. They offer the rugged construction of our new H Series of high band antennas that feature
both high RF performance and energy efficiency. They are ideal for GSM1800, PCS, UMTS and
Mobile TV networks where high gain is required. The antenna comes pre-connected with two
antenna control units (ACU).
Features/Benefits
Two x-polarized broadband panels in a single radome reduced tower loading
Rugged construction high reliability
Superior gain tracking difference between UL and DL <1dB
Stable azimuth horizontal beamwidth difference <6deg between UL and DL
Low PIM no system down-time, high call quality and reduced number of dropped calls
Excellent upper sidelobe suppression allows strong mechanical tilt
High gain provides better coverage
Wideband frequency performance enables future growth and increases flexibility
High front-to-back ratio
Includes (2) AISG 2.0 Compatible ACU-A20-N antenna control units.
Technical Specifications
Electrical Specifications
Frequency Range, MHz
Horizontal Beamwidth, deg
Vertical Beamwidth, deg
Electrical Downtilt Range, deg
Gain, dBi (dBd)
Upper Sidelobe Suppression, dB
Front-To-Back Ratio, dB
Polarization
VSWR
Isolation between Ports, dB
Isolation Between Bands, dB
3rd Order IMP @ 2 x 43 dBm, dBc
7th Order IMP @ 2 x 38 dBm, dBc
Impedance, Ohms
Maximum Power Input, W
Lightning Protection
Connector Type/Location
1710-1880
67
5.2
18.3 (16.2)
1850-1990
67
5
0-10
18.4 (16.3)
> 18 (typically > 20)
Typically 30
Dual pol +/-45
< 1.5:1, < 1.4:1, < 1.4:1
> 30
> 30
> 150, >150, N/A
N/A, N/A, >170
50
300
Direct Ground
(4) 7-16 Long Neck Female/Bottom
1900-2200
64
4.7
18.7 (16.6)
All information contained in the present datasheet is subject to confirmation at time of ordering
Mechanical Specifications
Dimensions - HxWxD, mm (in)
Weight w/o Mtg Hardware, kg (lb)
Survival/Rated Wind Speed, km/h (mph)
Wind Load @ Rated Wind, Front, N (lbf)
Wind Load @ Rated Wind, Max., N (lbf)
Wind Load @ Rated Wind, Side, N (lbf)
Wind Load @ Rated Wind, Rear, N (lbf)
Operation temperature, C (F)
Radome Material/Color
Mounting Hardware Material
Radiating Element Material
Reflector Material
Shipping Weight, kg (lb)
Packing Dimensions, HxWxD, mm (in)
Ordering Information
Mounting Hardware
Mounting Pipe Diameter, mm (in)
Mounting Hardware Weight, kg (lb)
APM40-2
60-120 (2.36-4.72)
3.4 (7.5)
APXVRR20-C-A20
Rev: A1
- 351 -
APXVRR20-C-A20
Optimizer Side-by-Side Dual Polarized Antenna, 1710-2200, 65deg, 18.7dBi, 1.9m, VET, 0-10deg RET
Vertical Pattern
Horizontal Pattern
Notes
For additional mounting information please click "External Document Link" below.
All information contained in the present datasheet is subject to confirmation at time of ordering
APXVRR20-C-A20
Rev: A1
- 352 -