Professional Documents
Culture Documents
Intelligent Systems and Robotics
Intelligent Systems and Robotics
ABSTRACT
The present paper attempts to deal with intelligent systems and Robotics in the present
context of activities handled by various departments in the globe. Intelligence system is a
system which acts according to its set objective. The advantages of studying an IS include
self-preservation, accuracy and copying action of others. For an IS to work
properly it should have the capability of communicating with environment and a set
objective and it consumes energy for internal actions. Artificial Intelligence is a branch of
science and technology to develop machines that are intelligent. The applications of AI
include natural language processing, pattern recognition, robotics and expert systems.
Robotics is design and manufacture of intelligent machines that are programmed to
perform certain tasks. Robots are used in industries to increase productivity and handle
jobs that are too dangerous for humans. Their construction is not simple. In reality robots
are built in a complex way. They are made of a controller which acts as the brain of a
computer, an arm which resembles the human arm is designed according to the
application, the drive which drives the robot to do a certain task, an end-effector which
attaches the hand to the arm and a sensor which provides a limited feedback to the robot.
The robotic architecture is mainly based on the microcontrollers. The use of integrated
microcontrollers is gained a lot of importance because of its reliability at a low cost. The
microcontroller forms the heart of the embedded system that forms the brain of the
majority of robots. Robotics is used for industrial automation to the extent that the terms
robotics and industrial automation have become synonyms in the industrial world.
Use of highly integrated Microcontrollers allows development of distributed intelligence
systems. Motion control on a robot is accomplished by components, software enabled
components and integrated solutions.
Androids are the anthropomorphic robots (i.e robots that look more like humans) need a
special mention because of the wide range of their utilities, and their ability to replace
humans & thus help in automation. In real world, robots are redefining manufacturing,
medicine, exploration and consumer electronics. Robotics has the potential to change our
economy, health, standard of living, knowledge and above all the world we live in.
Advantages of IS: An IS will greatly benefit from a few of the most basic
instincts, which are normally:
Curiosity, to promote the opportunity for learning and thus accelerate it.
The IS has to have an objective, it has to be able to check if its last action was
favorable, if it resulted in getting nearer to its objective, or not.
To reach its objective it has to select its response. A simple way to select a
response is to select one that was favorable in a similar previous situation.
Since the same response sometimes is favorable and sometimes fails, it has to be able
to recall in which situation the response was favorable, and in which it was not.
Therefore it stores situations, responses, and results.
Pattern recognition.
Robotics.
Expert system.
Robotics
Robotics is one of the important applications of AI and is defined as the technology of
building and using robots with artificial intelligence and computer controlled human-like
capabilities. Robotics is design and manufacture of intelligent machines that
are programmed to perform certain specific tasks. Robots are generally designed
to be a helping hand. They help us in difficult, unsafe or boring tasks. Simply put, robots
are machines that can be programmed to perform a variety of jobs, and they can range
from simple machines to highly complex, computer-controlled intelligent systems.
When we talk of robotics, Robocop and Terminator come to our mind. In movies,
robots such as the terminator are portrayed as fantastic, intelligent machines. However,
the majority of the robots today are not exactly the walking, talking intelligent machines
as depicted in the movies. The majority of robots are used in factories, warehouses and
laboratories. In the future, they may show up in schools, homes or even our bodies-the
possibilities are endless.
Arms:
Robot arms come in all shapes and sizes. The arm is that part of the
Drive: The drive is the engine that drives the links into their desired position.
Without a drive, a robot is as good as dead. Most drives are powered by air, water,
pressure and electricity.
End - effector: The end-effecter is the hand connected to the robots arm. It is
often different from a human hand: It could be a tool such as gripper, vacuum
pump, tweezers, scalpel, blow torch or just about anything that helps it do its job.
Some robots can change end effectors and be reprogrammed for a different set of
tasks. If the robot has more than one arm, there can be more than one end-effecter
on the same robot, each suited to a specific task.
Sensor: Robots without sensors are deaf and blind. Sensors provide limited feed
back to the robot and aid it in performing the job. These send information in the
form of electronic signals back to the controller, letting it know about the state of
the world around it. However, compared to the senses and abilities of even the
simplest living things, robots still have a very long way to go.
Robot architecture
Robotic systems are complex and tend to be difficult to develop .A robot architecture
primarily refers to the software and hardware framework for controlling the robotic
system. System developers have typically relied upon reference architectures to guide
the construction of robotic systems and provide computational services to sub-systems.
These architectures, however, have tended to be task and domain specific, and lack
suitability to a broad range of applications. For example, an architecture well suited to
direct teleportation will not be amenable for supervisory control or for autonomous use.
A mixture of asynchronous and synchronous control and data flow typifies the other
leading architectural trend. Asynchronous processes are characterized as loosely coupled
and event-driven without strict execution deadlines. Synchronous processes, in contrast,
are tightly coupled. These utilize a common clock and demand real-time situation.
Towards Autonomy
The computing and software technologies have reached a point where anyone with the
right aptitude can give any electronic product or application more autonomous
behavioural functionality than could be imagined in the near past. The advances made in
the field of micro electronics have virtually made the design and development of robotic
systems much easier. You only need to identify the right product for your application and
there you are building your robotic system.
Robotics is used for industrial automation to the extent that the terms robotics and
industrial automation have become synonyms in the industrial world.
The benefits of using electronics in robotic system are many:
1. Power requirements are typically less than for electromechanical systems.
2. Microcontroller-based devices are smaller and lighter than pure mechanical
systems.
3. Electronics provides a wide variety of changeable functions by simply
reprogramming the chip with the new product features.
4. The systems with fewer moving parts are more reliable while providing a longer
life.
In the hardware part the chip that forms the brain of the robot system steals the lime light.
A majority of robotic systems today employ a wide variety of micro controllers to power
the robotic brain. The low cost and significantly more advantages make micro controllers
and other electronic devices an ideal substitute for numerous mechanical applications.
The micro-controller is the No. 1 choice of robot developers to implement the brain that
powers the robot systems. The microcontroller forms the heart of the embedded system
that forms the brain of the majority of robots.
Distributed intelligence:
Use of highly integrated Microcontrollers allows development of distributed intelligence
systems.
The prime reason why the trend is towards distributed intelligence is that it
If a
problem occurs with one device, the rest of the system remains operational.
Motion Control:
In addition to highly repetitive tasks, positioning equipment has long been used to
provide specialized functions and processes. A good example is the semiconductor
manufacturing industry. In semiconductor manufacturing, the immediate presence of
operators has always been an unacceptable source of contamination. The newer facilities
are getting cleaner by completely removing people from the process; engineers are also
changing the equipment designs to eliminate that source of contamination.
When building a robot or a machine with a robotic function effectively embedded inside,
the biggest challenge is motion control. Robots are some of the most complex motion
control applications in the industry.
In order to achieve this capability a robust robot to camera calibration utility is required
and the robot controller must have an accurate model of the robot it is controlling. In
addition the robot programming language must have transformation variables for
developing the real location of the object by combining robot and vision location
information. Besides cameras small camcorders can be an inexpensive option for some
imaging applications in robotics.
The Androids
Any thing on robotics will be incomplete without a reference to androids. Technically,
androids are anthropomorphic robots, i.e robots that look more like humans. An android
is robot with shape and abilities of a human. Androids can be said to be the ultimate in
instrumentation and control engineering. Androids will help us enjoy life by relieving us
of many of the mundane tasks. We have been designing tools and devices for our use of
millennia. But, if we build a robot it will automatically be able to use all of those
countless tools in the same manner as we would. Thus the androids will take over many
of our mundane tasks provided they have our shape and capabilities.
Androids will be capable of building themselves. This, in turn, will lead to lower product
cost. Androids will also be able to tell us what is wrong when some thing inside them
fails. In some cases they will be able to repair themselves or other androids-such as
doctors repair humans. In short, androids will be a new species of humans.
Suggestions:
To proceed effectively and systematically, robot designers and their critics might
concentrate on the following:
1. Be clear what design alternatives you are using and why. Speak in terms of memory,
perception, learning. What representations of the world are built in? What is stored? How
are sensation and action coordinated? How are routines learned? Attempt to develop a
language for classifying systems:
a) categorical perception vs. only direct sensation. b) maps, map primitives, or
grammars for creating maps are hardwired. c) composite behaviors (e.g., sentence
templates), primitive behaviors (e.g., reflexes), or constraints between behaviors are
hardwired. d) opposing behaviors built in (e.g., left and right turn); sensors are fixed or
mobile.
2. Specify a robot's behavior using classical representations (e.g., scripts, grammars,
situation-action rules) so we can compare the capacities or "knowledge" of different
designs (including after learning). Similarly, specify environmental assumptions using
classical representations (e.g., quantitative and qualitative models). Principled robot
design requires systematically describing behaviors and environments.
3. Define the enterprise in terms of specific constraints: a) Functional; Biological and
Computational.
4. Don't view the design of a society of robots as a different research problem. Ignoring
the effect of other agents is just a variation of ignoring how the environment can structure
behavior (presumably the view we are arguing against).
5. Look for ways that emergent multi-agent patterns of interaction can be perceived by
individuals and structure individual behavior (Steels, 1990).
6. Move towards construction of processes, not just activation of rewired constraints
between behaviors. Move from the idea of predetermined, layered control (subsumption
architecture) to creating new compositions (literally new networks) that can be
reactivated (and potentially generalized rather than simply re-enacted). Programs like
Toto, compared to people, are both too reactive (no learning of procedures, composite
behaviors that effectively become new primitives) and too predetermined (no learning of
categories, new ways of coordinating behaviors outside the consumption layering).
Correlating multi-modal sensation might be a practical and not too complex starting
point.
References
1.Agre, P. 1988. The dynamic structure of everyday life. Dissertation in Electrical
Engineering and Computer Science, MIT.
2. Brooks, R. 1991. Intelligence without reason. IJCAI Proceedings. Sydney, Australia.
3.Clancey, W.J. in press a. Review of Rosenfield's The Invention of Memory. To appear in
the Journal of Artificial Intelligence.
4.Maes, P. 1990. Designing Autonomous Agents, Guest Editor. Robotics and Autonomous
Systems 6(1,2) 1-196.
5.Newell, A. 1984. The knowledge level, Artificial Intelligence 18(1) 87-127 .
6.www.bus.orst.edu/faculty/brownc/es_tutor/tree-lg.gif