Professional Documents
Culture Documents
Hempel Book Deco
Hempel Book Deco
Hempel Book Deco
Product Data
Manual
1/1
Product Name
02350
02450
02500
05250
05990
06600
09810
22460
26600
26630
28600
28830
35230
36610
38820
38830
38860
38900
45450
46600
48600
48740
52040
52060
52080
52410
52940
52980
55100
55210
56360
56610
56620
58100
58230
58260
58270
58330
58410
58440
58470
58540
58610
58650
58660
58670
58680
58710
58720
58770
58810
58840
58850
58860
58870
58910
Page 1 of 1
Date
Product Data
1/1
Area of use:
Wooden structures.
Substrates:
Wood.
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Transparent/00000
Flat
91
Not relevant (see REMARKS below)
43C
0.8 kg/litre
8 hours (20C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Brush
Dipping
None
None
THINNER 08230 or 08110
24 hours (20C) (see REMARKS below)
None
Surface condition:
The surface should be stable, firm, dry and free of contaminants like dust, dirt, oil,
grease and fungus.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain for
protection of all types of wood. The product contains biocides to prevent growth of
fungus and mould. Contains UV filter to reduce the degrading effect of the sunlight.
Area of use:
Wooden structures.
Substrates:
Wood.
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Brush
None
THINNER 08230 or 08110 (20%)
8 hours (20C)
None
Dipping
None
THINNER 08230 or 08110 (20%)
Surface condition:
The surface should be stable, firm, dry and free of contaminants like dust, sand, loose
old paint, dirt, oil, grease and algae. The moisture content of the wood should not
exceed 16 %. Avoid cleaning or grinding of the surface with steel wool or similar as
this may cause rust stains.
Wood preserver:
New wood (except teak and vacuum impregnated wood) and bare spots of previously
treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Interior and Exterior: Windows and door frames, skirting, furniture, etc.
Substrates:
Wood.
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Surface condition:
The surface should be stable, firm, dry and free of contaminants like dust, old paint,
dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %.
Wood preserver:
New wood (except teak and vacuum impregnated wood) and bare spots of previously
treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/2
Area of use:
Interior: New or previously varnished parquet floors and other wooden items such as
stairs, handrails, windows, doors, etc.
Substrates:
Wood.
PHYSICAL CONSTANTS:
Colours/Shade nos.:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Transparent/00000
Glossy
35 1
14.0 m/litre - 25 micron*
26C
1.0 kg/litre
1 hour (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and
dry film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max.:
Air Spray
08880 (5%)
Surface condition:
The surface should be stable, firm, dry and free of contaminants like dust, loose
varnish, old paint, dirt, oil and grease. The moisture content of the wood should not
exceed 16%.
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/1
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Transparent/00000
Flat (when penetration into substrate has taken place)
29 1
Not relevant (see REMARKS below)
25C
0.93 kg/litre
10 hours (10C)
4 hours (20C)
1 hour (40C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Mixing ratio for 05990:
Application method:
Thinner (max.vol.):
Cleaning of tools:
Pot life:
Recoat interval, min:
Recoat interval, max:
agent 95040
Airless spray
08450 (5%)
4 hours (20C)
None
1 hour (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Use only where application and curing can proceed at temperatures above 10C.
A theoretical sprading rate cannot be calculated. For practical purposes, approximately
10 m/litre is indicated depending on the surface roughness, porosity of the concrete,
extent of thinning and application method. The sealer is intended to saturate the
surface - any surplus to be removed, preferably when the sealer is still wet. Drying
data is given on the assumption that proper ventilation is provided.
HEMPEL'S EPOXY SEALER 05990 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
Concrete, masonry, cement rendering, plaster, stone and white-washed surfaces, etc.
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Transparent/00000
Glossy
20 1
Not relevant (see REMARKS below)
38C
0.8 kg/litre
15 minutes (20C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max.vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Brush/roller
08230 (50%)
THINNER 08230
30 minutes (20C)
None
Conventional spray
08230 (50%)
Airless spray
08230 (50%)
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colour/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Transparent/00000
Semi-flat
27 1
Not relevant (see REMARKS below)
> 66C
1.0 kg/litre
2 hours (10C)
1 hour (20C)
30 minutes (40C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (10%)
Fresh water
4 hours (10C)
None
Conventional spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Use only when application and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
A theoretical spreading rate cannot be calculated. For practical purposes,
approximately 10 m/litre is indicated depending on the surface roughness, the
porosity of the concrete, the extent of thinning and the application method. The sealer
is intended to saturate the surface - any surplus to be removed, preferably when the
sealer is still wet.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S BINDER/SEALER 09810 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
HEMPEL'S ALKYD UNDERCOAT 22460 is an alkyd intermediate coat for steel work and
a primer for non-metallic surfaces.
Area of use:
Substrates:
Woodwork, timber, fibre-board, sealed masonry surfaces in dry rooms and primed
steelwork.
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
55 1
13.8 m/litre - 40 micron*
38C
1.4 kg/litre
5 hours (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max.vol.):
Cleaning of tools:
Indicated film thickness dry:
indicated film thickness wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110 (5%)
08230 (15%)
THINNER 08230 or 08110
40 micron
75 micron
10 hours (10C)
5 hours (20C)
None
Airless spray
08230 (5%)
3 hours (40C)
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt,
grease and oil. It is recommended to apply HEMPEL'S ALKYD UNDERCOAT 22460
prior to the specified filling procedure.
Filling:
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Exterior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
29 1
9.7 m2/litre - 30 micron*
41C
1.1 kg/litre
2 hours (10C)
1 hour (20C)
30 minutes (40C)
*The theoretical spreading rate has been calculated for application on a primed and
smooth surface. The actual rates may differ significantly as the sealer is intended to be
applied on rough and porous substrates. The actual rates will also depend on the extent
of thinning, the application method and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Airless spray
Brush/roller
08080 (15%)
08080 (15%)
.017"-.021"
100 bar/1450 psi
(Airless spray data are indicative and subject to adjustment)
THINNER 08080
2 hours (10C)
1 hour (20C)
30 minutes (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colour/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate
Specific gravity:
Dry to touch:
Flash point:
White/10000
Flat
33 1
11.0 m2/litre - 30 micron*
1.1 kg/litre
2 hours (10C)
1 hour (20C)
43C
30 minutes (40C)
*The spreading rate has been calculated theoretically for application onto a primed and
smooth surface. The actual rates may differ significantly as the primer/sealer is intended
to be applied to rough and porous substrates. The actual rates will also depend on the
extent of thinning, the application method and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Brush/roller
08080 (15%)
THINNER 08080
2 hours (10C)
None
Conventional spray
08080 (30%)
1 hour (20C)
None
30 minutes (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Exterior: Walls
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos.:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
26 1
8.7 m2/litre - 30 micron*
> 66C
1.3 kg/litre
2 hours (10C)
1 hour (20C)
30 minutes (40C)
*The spreading rate has been calculated theoretically for application onto a primed and
smooth surface. The actual rates may differ significantly as the primer/sealer is intended
to be applied to rough and porous substrates. The actual rates will also depend on the
extent of thinning, the application method and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Recoat interval, minimum:
Recoat interval, maximum:
Airless spray
Conventional spray Brush/roller
Fresh water (5%)
Fresh water (5%)
Fresh water (10%)
.021"-.023"
150-180 bar
(Airless spray data are indicative and subject to adjustment)
Fresh water
4 hours (10C)
2 hours (20C)
1 hour (40C)
None
None
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Use only where application and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S CONTEX PRIMER W/B 28600 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
26 1
8.7 m2/litre - 30 micron*
> 66C
1.3 kg/litre
2 hours (10C)
1 hour (20C)
30 minutes (40C)
*The spreading rate has been calculated theoretically for application onto a primed and
smooth surface. The actual rates may differ significantly as the primer/sealer is intended
to be applied to rough and porous substrates. The actual rates will also depend on the
extent of thinning, the application method and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, minimum:
Recoat interval, maximum:
Brush/roller
Fresh water (10%)
Fresh water
4 hours (10C)
None
Conventional spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
Remarks:
Use only where application and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S PRIMER/SEALER 28830 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Description:
HEMPEL'S EPOXY FILLER 35230 is a two-component, high solid epoxy filler. It is a very
hard, impact and chemical resistant material when cured. It can be applied in a dry film
thickness of up to 10 mm without cracking. The product is easy to work with and has
excellent filling properties. Can be recoated with solvent-borne primers/sealers and is
the preferred filler for epoxy and polyurethane systems.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Flash point:
Specific gravity:
Dry to touch:
Ready to sand:
Off-white/11630
Flat
98 1
25C
2.0 kg/litre
3 hours (20C)
16 hours (20C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Mixing ratio for 35230:
Application method:
Thinner (max. vol.):
Pot life:
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply an epoxy primer/sealer prior
to the specified filling procedure.
Remarks:
Use only where application and curing can proceed at temperatures above 5C.
The dry film thickness will be determined by the depth of crevices, blow-holes or the
degree of surface irregularities. The practical spreading rate will alter accordingly.
If the maximum recoating interval is exceeded, roughening of the surface is necessary.
HEMPEL'S EPOXY FILLER 35230 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Specific gravity:
Flash point:
Dry to touch:
Dry to handle:
Ready to sand:
Off-white/11630
Flat
57 1
1.9 m/litre - 300 micron (when used as a skim coat) (see REMARKS below)
1.7 kg/litre
23C
6 hours (10C)
3 hours (20C)
1 hours (40C)
12 hours (10C)
6 hours (20C)
3 hours (40C)
48 hours (10C)
24 hours (20C)
12 hours (40C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
2 hours (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the
specified filling procedure. Touch-up with primer/sealer on areas repaired with filler can
be done prior to application of topcoats.
Remarks:
The dry film thickness will be determined by the depth of the crevices, blowholes or the
degree of surface irregularities.
The practical spreading rate will be altered accordingly.
Drying data is given on the assumption that proper ventilation is provided.
HEMPEL'S FILLER 36610 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Ready to sand:
Off-white/11630
Flat
49 1
2.0 m/litre - 250 micron (when used as a skim coat) (see REMARKS below)
> 66C
1.7 kg/litre
8 hours (10C)
4 hours (20C)
2 hours (40C)
48 hours (10C)
24 hours (20C)
12 hours (40C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
3 hours (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the
specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is
recommended prior to application of topcoats.
Remarks:
Use only where application and drying can proceed at temperatures above 5C and
relative humidity below 85%.
Not recommended in rooms with high humidity such as bathrooms, kitchens, etc.
The dry film thickness will be determined by the depth of crevices, blow-holes or the
degree of surface irregularities. The practical spreading rate will alter accordingly.
HEMPEL'S INTERIOR FILLER 38820 is not recommended for deep filling. Avoid applying
at excessive film thickness.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S INTERIOR FILLER 38820 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Ready to sand:
Off-white/11630
Flat
49 1
2.0 m/litre - 250 micron (when used as a skim coat) (see REMARKS below)
> 66C
1.7 kg/litre
8 hours (10C)
4 hours (20C)
2 hours (40C)
48 hours (10C)
24 hours (20C)
12 hours (40C)
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
3 hours (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the
specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is
recommended prior to application of topcoats.
Remarks:
Use only where application and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
The dry film thickness will be determined by the depth of crevices, blow-holes or the
degree of surface irregularities.
The practical spreading rate will alter accordingly.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S EXTERIOR FILLER 38830 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
51 1
2.0 m/litre - 250 micron*
> 66C
1.7 kg/litre
8 hours (10C)
4 hours (20C)
2 hours (40C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Conventional spray
None
Fresh water
12 hours (10C)
None
Hopper gun
None
Air-mix spray
None
6 hours (20C)
None
3 hours (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the
specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is
recommended prior to application of topcoats.
Sealing:
Transparent:
Opaque:
Remarks:
Use only where applicaton and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
Other primers or subsequent coats may be specified.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S SPATTER FINISH 38860 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/1
HEMPEL'S ACRYLIC FILLER 38900 is a high-grade, flexible water-borne acrylic filler. The
high solids content ensures excellent workability, smoothing and filling properties. Ideal
for filling joints in gypsum boards. Can be used as a repair filler or for full skim-coat
application. HEMPEL'S ACRYLIC FILLER 38900 can be overcoated with solvent-borne or
water-borne coatings without use of a primer/sealer.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Ready to sand:
Off-white/11630
Flat
57 1
1.9 m/litre - 300 micron (when applied as a skim coat)*
> 66C
1.8 kg/litre
8 hours (10C)
4 hours (20C)
2 hours (40C)
48 hours (20C)
24 hours (20C)
12 hours (40C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
3 hours (40C)
None
Surface condition:
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil. It is recommended to apply a primer/sealer prior to the
specified filling procedure.
Remarks:
Use only where applicaton and drying can proceed at temperatures above 5C,
preferably above 10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S ACRYLIC FILLER 38900 is for professional use only.
Note:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
ISSUED BY:
Page 1 of 1
HEMPEL
Product Data Sheet
Product Data
1/2
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
60 1
6.0 m/litre - 100 micron*
12C
1.5 kg/litre
2 hours (10C)
1 hour (20C)
30 minutes (40C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Mixing ratio for 45450:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Pot life:
Recoat interval, min:
Recoat interval, max:
agent 95210
Airless spray
08450 (5%)
3 hours (20C)
1 hour (20C)
None
30 minutes (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
SURFACE
CONDITION:
The surface should be stable, firm, dry and free of dust, sand loose old paint, laitance, dirt,
grease and oil. It is recommended to apply an epoxy primer/sealer prior to the specified filling
procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to
application of topcoats.
FILLING:
SEALING:
REMARKS:
Note:
Use only where application and curing can proceed at temperatures above 5C.
Other sealer/filler types may be specified. Drying data given is on the assumption that proper
ventilation is provided.
HEMPEL'S EPOXY TEXTURE 45450 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Exterior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Airless spray
Brush/roller
08080 (5%)
08080 (5%)
.025"-.027"
100 bar/1450 psi
(Airless spray data are indicative and subject to adjustment)
THINNER 08080
50 micron
125 micron
2 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
REMARKS:
Note:
Drying data is given on the assumption that proper ventilation is provided. To obtain the best
result, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEX
anticarbonation system. Please also see HEMPEL'S product information for HEMPEL'S CONTEX
46600.
HEMPEL'S CONTEX SMOOTH 46600 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Exterior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, maximum:
Airless spray
Brush/roller
Fresh water (5%)
Fresh water (5%)
.023"-.025"
150-180 bar
(Airless spray data are indicative and subject to adjustment)
Fresh water
75 micron
150 micron
12 hours (10C)
6 hours (20C)
3 hours (40C)
None
None
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint,
laitance, dirt, grease and oil.
FILLING:
SEALING:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C,
preferably above 10C, and relative humidity below 85%. Drying data is given on the
assumption that proper ventilation is provided.
To obtain the best result, follow HEMPEL's recommended painting specifications for
HEMPEL'S CONTEX anticarbonation system.
HEMPEL'S CONTEX SMOOTH W/B 48600 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Off-white/11630
Flat
54 1
3.7 m/litre - 150 micron*
> 66C
1.6 kg/litre
2 hours (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max.vol.):
Cleaning of tools:
Indicated film thickness, dry:
indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max
Brush/roller
None
Fresh water
150 micron
275 micron
8 hours (10C)
None
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPEL'S GLOSS ENAMEL 52040 is a superior alkyd topcoat available in a wide range
of colours. The product is ideally suited for kitchens and bathrooms, doors, window
frames, furniture and woodwork in general. Also ideal for metal surfaces. Approved
according to SASO standard 472-1986, gloss enamel for interior and exterior surfaces.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110(5%)
08230 (15%)
THINNER 08230 or 08110
30 micron
75 micron
8 hours (20C)
None
Airless spray
08230 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with
primer on areas repaired with filler is recommended prior to application of topcoats.
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPEL'S FLAT ENAMEL 52060 is a superior alkyd topcoat. The product is ideally
suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in
general. Also ideal for metal surfaces.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110(5%)
08230 (15%)
THINNER 08230 or 08110
30 micron
75 micron
8 hours (20C)
None
Airless spray
08230 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
SURFACE
CONDITION:
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up
with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110 (5%) 08230 (15%)
THINNER 08230 or 08110
30 micron
75 micron
8 hours (20C)
None
Airless spray
08230 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas .
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with
primer on areas repaired with filler is recommended prior to application of topcoats
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPEL'S METALLIC PAINT 52410 is a superior alkyd topcoat. The product is highly
pigmented with micaceous iron oxide (MIO) to provide a special metallic textured finish.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
08230 or 08110 (5%)
THINNER 08230 or 08110
40 micron
75 micron
12 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up
with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPALUXGLOSS 52940
Description:
HEMPALUX GLOSS 52940 is a superior alkyd topcoat with improved colour retention.
The product is ideally suited for doors, window frames, furniture and woodwork in
general where a high quality finish is required. Also ideal for primed metal surfaces.
The product has excellent hiding power and is easy to apply.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110(5%)08230 (15%)
THINNER 08230 or 08110
30 micron
75 micron
8 hours (20C)
None
Airless spray
08230 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with
primer on areas repaired with filler is recommended prior to application of topcoats.
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPALUXSEMI-GLOSS 52980
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
08230 or 08110 (5%) 08230 (15%)
THINNER 08230 or 08110
30 micron
75 micron
4 hours (20C)
None
Airless spray
08230 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and
oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with
primer on areas repaired with filler is recommended prior to application of topcoats
FILLING:
PRIMER:
On ferrous metal:
On wood:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPATHANEENAMEL 55100
BASE 55109 with CURING AGENT 95370
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Fully cured:
APPLICATION DETAILS :
Mixing ratio for 55100:
Application method:
Thinner (max. vol.):
Pot life:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
agent 95370
Conventional spray
08080 (25%)
hour (40C)
7 : 1 by volume
(see REMARKS below)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
REMARKS:
Drying data is given on the assumption that proper ventilation is provided. High humidity and/or
condensation during application and the following 16 hours (20C/68F) may adversely affect the
film formation. When applying HEMPATHANE ENAMEL 55100 by spray, thinning is recommended
to obtain the best possible finish. The necessary amount of thinning will depend on the actual
conditions.
Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed
until use. Open cans with caution due to possible high pressure. Even small traces of water in the
mixed paint will reduce pot life and result in film defects.
HEMPATHANE ENAMEL 55100 is for professional use only.
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPATHANETOPCOAT 55210
BASE 55219 with CURING AGENT 95370
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
Fully cured:
APPLICATION DETAILS :
Mixing ratio for 55210:
Application method:
Thinner (max. vol.):
Pot life:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
7 : 1 by volume
(see REMARKS below)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
REMARKS:
Drying data is given on the assumption that proper ventilation is provided. High humidity and/or
condensation during application and the following 16 hours (20C/68F) may adversely affect the
film formation. When applying HEMPATHANE TOPCOAT 55210 by spray, thinning is recommended
to obtain the best possible finish. The necessary amount of thinning will depend on the actual
conditions.
Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed
until use. Open cans with caution due to possible high pressure. Even small traces of water in
the mixed paint will reduce pot life and result in film defects.
HEMPATHANE TOPCOAT 55210 is for professional use only.
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPATEXENAMEL 56360
Description:
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
08080 (5%)
THINNER 08080
35 micron
100 micron
4 hours (20C)
None
Conventional spray
08080 (15%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Exterior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Conventional spray
08080 (5%)
THINNER 08080
150 micron
275 micron
2 hours (20C)
None
Hopper Gun
08080 (5%)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
INTERMEDIATE
COAT:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Exterior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoating interval, max:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
INTERMEDIATE
COAT:
REMARKS:
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMUCRYLENAMEL 58100
Description:
Area of use:
Interior and exterior: Walls, ceilings, roofs and primed structural steel.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (5%)
Fresh water
40 micron
100 micron
6 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data is given on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide
should be taken into account.
HEMUCRYL ENAMEL 58100 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Interior and exterior: Walls, ceilings, roofs and primed structural steel.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (5%)
Fresh water
75 micron
175 micron
2 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data is given on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide
should be taken into account.
HEMUCRYL TOPCOAT HI-BUILD 58230 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
35 micron
100 micron
8 hours (10C)
None
Airless spray
Fresh water (5%)
4 hours (20C)
None
2 hours (40C)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S ACRYLIC SILK EMULSION 58260 is for professional use.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
35 micron
100 micron
8 hours (10C)
None
Airless spray
Fresh water (5%)
4 hours (20C)
None
2 hours (40C)
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Other sealer/filler types may be specified.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 is for professional use.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (20%)
Fresh water
35 micron
125 micron
8 hours (10C)
None
Conventional spray
Fresh water (10%)
Airless spray
Fresh water (5%)
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S SILK EMULSION 58330 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (20%)
Fresh Water
30 micron
100 micron
4 hours (10C)
None
Conventional spray
Fresh water (10%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S CONTRACT EMULSION 58410 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS :
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
(None)
Fresh Water
50 micron
125 micron
4 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of contaminants like dust, old paint, dirt, oil,
grease and algae.
UNDERCOAT:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data is given on the assumption that proper
ventilation is provided.
Apply one or more coats to obtain the desired colour and a uniform appearance.
As the product is transparent, the resulting colour will depend on the colour of the substrate.
HEMPEL'S WALL VARNISH 58440 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Interior: Walls.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
UNDERCOAT:
OVERCOATING:
To obtain a glossy finish a clear coat of HEMPEL'S WALL VARNISH 58440 may be applied.
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other undercoats may be specified.
HEMPEL'S WALLART 58470 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Textured rollers
None
Fresh water
40 micron
100 micron
4 hours (20C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S SILK TEXTURE 58540 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (20%)
Fresh water
30 micron
75 micron
4 hours (10C)
None
Conventional spray
Fresh water (10%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S INTERIOR EMULSION 58610 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
35 micron
100 micron
4 hours (10C)
None
Conventional spray
Fresh water (5%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified. To obtain full hiding power when changing colour, it is
recommended to apply HEMPEL'S FLAT EMULSION 58710 as an undercoat in the desired colour.
HEMPEL'S GLOSS EMULSION 58650 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
76 1
0.4 m/litre - 2 mm*
> 66C
2.0 kg/litre
5 hours (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth
surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of
HEMPEL'S RUSTIK-2 58660)
None
Fresh water
4 days (20C)
2 days (40C)
None
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S RUSTIK-2 58660 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
76 1
0.25 m/litre - 3 mm*
> 66C
2.0 kg/litre
5 hours (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth
surfaces apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of
HEMPEL'S RUSTIK-3 58670)
None
Fresh water
4 days (20C)
2 days (40C)
None
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S RUSTIK-3 58670 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
76 1
0.15 m/litre - 5 mm*
> 66C
2.0 kg/litre
5 hours (20C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Recoat interval, min:
Recoat interval, max:
Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth
surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of
HEMPEL'S RUSTIK-5 58680).
None
Fresh water
4 days (20C)
2 days (40C)
None
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S RUSTIK-5 58680 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (15%)
Fresh water
30 micron
75 micron
4 hours (10C)
None
Conventional spray
Fresh water (15%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S FLAT EMULSION 58710 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (15%)
Fresh water
30 micron
75 micron
6 hours (10C)
None
Conventional spray
Fresh water (15%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas .
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Other sealer/filler types may be specified.
Drying data given is on the assumption that proper ventilation is provided.
HEMPEL'S ACRYLIC EMULSION 58720 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
HEMPEL'S SUPER FINE TEXTURE 58770 is a water-borne paint, which gives a very fine
grain-textured finish for decorative and protective effect on facades and exterior walls.
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Flat
42 1
4.2 m/litre - 100 micron*
> 66C
1.5 kg/litre
6 hours (10C)
3 hours (20C)
1 hours (40C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (15%)
Fresh water
100 micron
250 micron
12 hours (10C)
None
Conventional spray
Fresh water (15%)
Airless spray
Fresh water (5%)
6 hours (20C)
None
3 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Note:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that sufficient
ventilation is provided.
Other sealer/filler types may be specified.
HEMPEL'S SUPER FINE TEXTURE 58770 is for professional use only.
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Exterior: Roofs.
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
White/10000
Semi-flat
54 1
1.1 m/litre - 500 micron*
> 66C
1.2 kg/litre
6 hours (10C)
3 hours (20C)
1 hour (40C)
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Conventional spray
None
None
Fresh water
500 micron
850 micron
6-12 hours (10C) 3-6 hours (20C)
None
None
Airless spray
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Mix 2-3 parts of sand to 1 part of HEMPEL'S ROOF COATING 58810 to fill small cracks in the
concrete.
SEALING:
On concrete:
On ferrous metal:
On wood:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%.
Drying data given is on the assumption that proper ventilation is provided.
Note:
ISSUED BY
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colour/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
250 micron
475 micron
8 hours (10C)
None
Conventional spray
None
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. D rying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified.
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
150 micron
250 micron
8 hours (10C)
None
Conventional spray
None
Air-mix spray
None
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer/filler types may be specified.
When top coating with semi-gloss to high-gloss finishes, spray application is recommended to
obtain the best possible aesthetic appearance to an even overall effect.
Note:
ISSUED BY
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
200 micron
325 micron
8 hours (10C)
None
Conventional spray
None
Air-mix spray
None
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer types may be specified.
When top coating with semi-gloss to high-gloss finishes, spray application is recommended to
obtain the best possible aesthetic appearance to an even overall effect.
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Flash point:
Theoretical spreading rate:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
None
Fresh water
300 micron
525 micron
8 hours (10C)
None
Conventional spray
None
Air-mix spray
None
4 hours (20C)
None
2 hours (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
SURFACE
CONDITION:
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
SEALING:
Transparent:
Opaque:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity below 85%. Drying data given is on the assumption that proper
ventilation is provided.
Other sealer types may be specified.
When top coating with semi-gloss to high-gloss finishes, spray application is recommended to
obtain the best possible aesthetic appearance to an even overall effect.
Note:
ISSUED BY:
Page 2 of 2
Product Data
1/2
Area of use:
Substrates:
PHYSICAL CONSTANTS:
Colours/Shade nos:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
APPLICATION DETAILS:
Application method:
Thinner (max. vol):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Brush/roller
Fresh water (20%)
Fresh water
30 micron
75 micron
4 hours (10C)
None
Conventional spray
Fresh water (10%)
Airless spray
Fresh water (5%)
2 hours (20C)
None
1 hour (40C)
None
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
Page 1 of 2
HEMPEL
Product Data Sheet
2/2
The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.
Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of
topcoats.
FILLING:
Interior:
Exterior:
SEALING:
Transparent:
Opaque:
REMARKS:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity 85%.
Drying data given is on the assumption that proper ventilation is provided.
Note:
ISSUED BY
Page 2 of 2